EOL tvo'. Eo11)E-16132.1cyj grregt-f-altffrtg (atr-{a- whii3t491-.j-0 urataftcr-414wf4arr4 at* s 284129 irt ar eei1ta01:0510-2412716, achoubey@bheljhs.co.in Expression Of Interest (E0I): "For Bending Of Aluminum / Copper Primary Tube For Instrument Transformer On Labour Basis SL. NO. CONTENTS PAGE NO. 1 Description 2 2 3 Brief Description about BHEL 2 Brief Description about BHEL Jhansi 2-3 4 Scope of Work 3 5 6 7 Estimated cost of work 3 BG- Requirement 3 Qualification Requirement 4 8 Documents to be submitted along with the E01 5 9 Details of items & Qty. 6-7 Abhishek Sr. P 0 (MM) Prepared by ML Ahirw r DGM (MM) Checked by Page 1 of 7
(RT17 Trra:Fircr--41T-dibTrir 3-t-o- $441t fgaichls 284129 5th Q,71- ec41001:0510-2412716, achoubev@bhelihs.coin and mlahirwar@bhelihs.co.in Expression of Interest (E0I): "For bending of Aluminum / Copper primary tube for Instrument Transformer on labour basis 1. Description: Expression of interest (E0I) is invited from Indian supplier/vendors /Contractors "For bending of Aluminium / Copper Tubes for Instrument Transformers". Interested companies who wish to associate with BHEL Jhansi to execute the above work on labour basis may submit their expression ofinterest. 2. Brief Description about BHEL BHEL, A Maharatna, is India's Largest engineering and manufacturing company of its kind engaged in the design, engineering, manufacture, construction, testing, commissioning and servicing of a wide range of products, systems and services for the core sectors of the economy, viz. Power, Transmission, Industry, Transportation, Renewable Energy, Oil & Gas and Defence. The company has established capability to deliver 20,000 MW p,a. of power equipment to address the growing demand for power generation equipment. BHEL has 1,57,568 MW of Power Generation Equipment installation worldwide up to Mar' 15, In India, out of total Power Generating Equipment installations of 2.14 GW, 1.32 GW (55 /0) of equipment have been installed by BHEL. BHEL manufactured power plants have also been installed across 21 countries including Malaysia, Oman Iraq, the UAE, Bhutan, Egypt and New Zealand. Details about the entire range of BHEL's products and operation and other details can be accessed by visiting our website www.bhel.in 3. Brief Description about BHEL Jhansi By the end of 5th five-year plan, it was envisaged by the planning commission that the demand for power transformer would rise in the coming years. Anticipating the country's requirement BHEL decided to set up a new plant, which would manufacture power and other types of transformers in additions to the capacity available in BHEL Bhopal. The Bhopal plant was engaged in manufacturing transformers of large ratings and Jhansi unit would concentrate on Power Transformer upto 50 MVA, 132 KV class and other transformers like instrument transformers, traction transformer for railway etc. This unit of Jhansi was established around 14 Km from the city on the N.H. No. 26 on jhansi Lalitpur road. It is called 2nd generation of BHEL set up in 1974 at an estimated cost of Rs 16.22 crores inclusive of Rs 2.1 crores for township. Its foundation was laid by late Mrs. Indira Gandhi the prime minister on 9 th Jan. 1974. The commercial production of the unit begin in 1976-77 with an output of Rs 53 lacs since then there has been no looking back for BHEL Jhansi. Page 2 of 7
GoldenJub dee (417a" TT it-1011-1) 514hl4C 31- TITTreICE4trdfaaTigT,F#F1- St1cricils 284129 Jrli CraV 2.0N,101:0510-2412716, $--alai achoubev@bhelihs.co.in The plant of BHEL is equipped with most modern manufacturing processing and testing facilities for the manufacture of power, special transformer and instrument transformers, Diesel shunting locomotives and AC / DC Locomotives. The layout of the plant is well streamlined to enable smooth material flow from the raw material stage of the finished goods. All the feeder bays have been laid perpendicular to the main assembly bay and in each feeder bay raw material smoothly gets converted to sub assemblies, which after inspection are sent to main assembly bay. The raw material that are produced for manufacture are used only after thorough material testing in the testing lab and with strict quality checks at various stage of productions. This unit of BHEL basically engaged in the production and manufacturing of various types of transformers and capacities. With the growing competition in the transformer section, in 1985-86 it under put the re-powering of the DESL. In 1987-88, BHEL progressed a step further in undertaking the production of AC Locomotives and subsequently it started of AC / DC locomotives also. 4. Scope of Work The scope of the work covers lifting of material from BHEL Jhansi against Suitable Bank Guarantee, transportation to their works bending of tubes as per requirement, supply back the bend tube to BHEL Jhansi on FOR Jhansi basis. 5. Estimated cost of work Approx. 14 lakhs Annual. 6. BG- Requirement The material will be issued against your bank guarantee (BG). In case of finalization of contract, bank guarantee of about 10% value of material as detailed below:- PSL value of material issued Above Rs. 05 lacs & up to Rs. 10 lacs Above Rs. 10 lacs & up to Rs. 50 lacs Above Rs. 50 lacs Value of BG Rs. 1 lacs Rs. 5 lacs Rs. 10 lacs Shall be submitted towards the raw material issued by BHEL The BG should be valid for the full term of the Rate Contract. 7. Qualification Requirement Part A Page 3 of 7
(3-TR-a- +1,kchli r.345n-1) sta-a4c TrraTti;r-Etz-d-ra-aTrar 1q.-1,:nls 284129 irli wav Maharatha Company een))0-1:0510-2412716, achoubev@bhelihs.co.in and mlahirwar@bhelihs.co.in 1) The interested parties, as a principal contractor must have successfully completed at least 3 works of similar nature. 2) The interested Party must have the bending machine to carry out the work. (Make, model, year of Establishment & Photograph should be attached). Part B 1) The minimum average annual turnover (MAAT) requirement of interested parties shall not be less than 50% of estimated value of the package. 2) Bidder shall be financially sound and stable. The liquid assets as per audited accounts at the end of last financial year and credit facility available from bank duly certified by bank at the end of month preceding to the date of submission of the tender together as indicated should not be less than 25% of estimated cost of package. 3) Net worth of bidder as per audited financial results shall be positive on the last day of preceding financial year. 8. Documents to be submitted along with the E01 1) Covering Letter duly signed by an Authorized Signatory on Company letter head, expressing the intent and listing clearly the Enclosures. 2) Copies of Purchase Orders expressing their ability to carry out bending with qualification Requirement. Page 4 of 7
(3.17a" TT 3454,H) TrrgercrEtrAbTrJr sicht. r fo-torls 284129 mgr Maharatha Company Q.1.0510-2412716, achoubev@bheljhs.co.in and mlahirwar@bhelihs.co.in 3) Performance certificates / work completion from customer. 4) Organization chart. 5) Ownership Information and Year of Establishment. 6) Copy of PAN/CST/TIN/Excise no. /Service Tax Documents. 7) Detailed list of customers. 8) Audited Financial Report for Last 3 years. 9) Acceptance to submission of BG for lifting of material. ( (Abhishek) SR P.O. (MM) BHEL Jhansi Phone-0510-241-2716 Email :achoubev(&_bhelihs.co.in (M.L. Ahirw r) DGM (MM) BHEL Jhansi Phone-0510-241-2716 Email : mlahinniar(a,bhelhs.co.in Page 5 of 7
Goltk:n.Jubilee (31-7-6- kaik.345n-0 Trrxpi ficr -411-d-ftaTpr 1-414, s 284129 irti CltU.t-,T14))0-1:0510-2412716, achoubey@bheljhs.co.in DETAILS OF QUANTITY FOR E01 FOR BENDING OF CONDENSER PRIMARIES S. No. 1 Description of Items Bending of Aluminium tube for 220 kv CT size- 60.33 o/d x 5.54 tk X 6400-7200 lg. To drg no.- 24773250002 item-01 rev-08, 24773250004 item-01 rev-03 24773250006 item-01 rev-02 Qty. 25 Nos. 2 Bending of Copper tube for 220 kv CT size- 60.33 o/d x 3.5 tk X 6590-7200 lg. To drg no.- 24773250002 item-05 & 07 rev-08 150 Nos. 3 Bending of Copper tube for 220 kv CT size- 60.33 o/d x 7.5 tk X 6500-7200 lg. To drg no.- 24773250002 item-06 & 07 rev-08, 24773250017 item-01 rev-03 (only Bending) 24773250016 item-01 rev-05 24773250006 item-05 & 06 rev-02 125 Nos. 4 Bending of Aluminium tube for 220 kv CT size- 60.33 o/d x 5.54 tk X 6900 lg. To drg no.- 24773250011 item-02 rev-04 50 Nos. 5 Bending of copper tube for 220 kv CT size- 60.33 o/d x 3.5 tk X 6900 lg. To drg no.- 24773250011 item-01 rev-04 25 Nos. 6 Bending of Copper tube for 220 kv CT size- 60.33 o/d x 7.5 tk X 6850-7200 lg. To drg no.- 24773250017 item-02 rev-03, 24773250016 item-02 rev-05 25 Nos. 7 Bending of copper tube for 220 kv CT size- 60.33 o/d x 4.5 tk X 6590-7200 lg. To drg no.- 24773250002 item-02 rev-08 150 Nos. 8 Bending of Copper tube for 220 kv CT size- 25 Nos. Page 6 of 7
3TirettOft'W--Witailltg (att46.3454-,h) Trrmircr4u-dībTrar 3-1w,5-1411 1. 0-ich 5 284129 3r1i 4,0-1.0510-2412716, achoubey@bhelihs.coin 60.33 o/d x 4.5 tk X 6600 lg. To drg no.- 24773250017 item-01 rev-03 (only Bending) 9 Bending of aluminium tube for 132 kv CT size- 60.33 o/d x 5.54 tk X 4600-5500 lg. To drg no.- 34763250002 item-01,02 & 03 rev-03 34763250012 item-03 & 04 rev-03 30 Nos. 10 Bending of Aluminium tube for 132 kv CT size- 45 o/d x 5 tk X 4600-5400 lg. To drg no.- E6203854 item-02,04 & 06 rev-07 50 Nos. 11 Bending of Copper tube for 132 kv CT size- 45 o/d x 5 tk X 4600-5500 lg. To drg no.- E6203854 item-01,03 & 05 rev-07, 24763250005 item- 01&04 rev-07 (only Bending) 24763250006 item-01& 04 rev-03 20 Nos. 12 Bending of Copper tube for 132 kv CT size- 60.33 o/d x 3.5 tk X 4600-5500 lg. To drg no.- 34763250012 item-01& 02 rev-03 20 Nos. 13 Bending of copper tube for 132 kv CT size- 45 o/d x 6 tk X 4600-5500 1g. To drg no.- E6203854 item-07 rev-07, 24763250005 item-07 to #10 rev-07 Only bending), 24763250006 item-07 to #11 rev-03 150 Nos. 14 Bending of copper tube for 132 kv CT size- 60.33 o/d x 7.5 tk X 4600-5500 lg. To drg no.- 24763250002 item-02 rev-01 10 Nos. 15 Bending of copper tube for 132 kv CT size- 45 o/d x 6 tk X 4600-5500 lg. To drg no.- 24763250012 item-03 rev-04 20 Nos. Page 7 of 7