Western Products, PO Box 45038, Milwaukee, WI 534-9538 www.westernplows.com January 15, 019 Lit. No. 437, Rev. 0 Hopper and Drive Components Striker Hopper Spreader with Electric Motors #99030-1, 99031-1, 99035-1, 99039-1 Parts List This Parts List is for WESTERN Striker Hopper Spreaders with serial numbers beginning with 1707 and higher. A DIVISION OF DOUGLAS DYNAMICS, LLC
HOPPER COMPONENTS 3 18 17 19 15 1 1 4 0 1 5 14 1 7 3 13 8 5 9 4 18 19 Lit. No. 437, Rev. 0 January 15, 019
Hopper Components Item Part Qty Description Item Part Qty Description 1 99515 Top Screen 7' 8 8474 1 Pintle Chain (13 Links) 9' Hopper 995 Top Screen 8' 94898 1 Pintle Chain (8 Links) 7' & 8' 99517 Top Screen 9' Narrow (3.0 yd 3 ) Hoppers 99518 Top Screen 9' Wide (4.5 yd 3 ) 9 849 1 Conveyor Repair Bar w/pins & Cotters 99578 1 Screen Attachment Kit (pkg of 4) 8475 1 Conveyor Repair Link w/pins & Cotters 3 9948 1 Inverted V Kit 7' & 8' Hoppers 99073 Tensioner Bolt Kit ns 999 1 Inverted V Kit 9' Hopper 1 99480 1 Idler Shaft Assembly Kit 4 99083 1 Feed Gate Assembly w/wing Nut 13 94953 Spreader Bearing Kit ns 9953 1 Rubber Grip, Feed Gate Handle 14 8584 Label Warning/Caution, Spreaders 5 518 1 1/-13 Wing Nut G5 15 77 4 Label Caution, Do Not Lift 78 1 Wiper Replacement Kit 0 1 Label Warning, Rear Camera 7 99079 1 Rivet Kit, Steel Hopper Wiper (pkg of 4) ns 8790 1 Ratchet Straps Kit (pkg of 4) Item 3 9948 Inverted V Kit 7' & 8' Hoppers 17 4* 3/8- x 1 Carriage Bolt SS 19 8 3/8- Hex Nut SS 18 8 3/8 Lock Washer SS Item 99073 Tensioner Bolt Kit 0 1 5/8- x Take-Up Bolt 1 5/8- Hex Nut Item 1 99480 Idler Shaft Assembly Kit 18 3/8 Lock Washer SS 4 9975 Bearing Alignment Plate 19 3/8- Hex Nut SS 5 4 3/8- x 1-1/ Carriage Bolt SS 94351 1 Idler Shaft 9453 Bearing 1.15 ID -Bolt Flange 3 99479 -Tooth Sprocket Assembly Item 13 94953 Spreader Bearing Kit 18 3/8 Lock Washer SS 5 4 3/8- x 1-1/ Carriage Bolt SS 19 3/8- Hex Nut SS 9453 Bearing 1.15 ID -Bolt Flange SS = Stainless Steel ns = not shown G = Grade * Qty for 9' hopper. Qty for 9' hopper. Logo Identity, Striker & WESTERN Application Item Part Qty Description 7' (1.5 yd 3 ) 8' (.0 yd 3 ) 9' (3.0 yd 3 ) 9' (4.5 yd 3 ) ns 9997 Side Logo Striker, Small ns 9999 Side Logo Striker, Large ns 999 1 Rear Logo WESTERN, Small ns 9998 1 Rear Logo WESTERN, Large Lit. No. 437, Rev. 0 3 January 15, 019
CONVEYOR DRIVE COMPONENTS 31 3 34 9 7 3 33 14 15 1 9 30 14 13 8 15 30 31 17 9 7 8 1 4 5 3 4 5 18 3 19 0 17 1 Lit. No. 437, Rev. 0 4 January 15, 019
Conveyor Drive Components Item Part Qty Description Item Part Qty Description 1 9909 1 Electric Power Group Mount Kit ns 879 1 Gear Box Cover Kit, Primary 99089 1 Gear Box Bracket Kit ns 8799 1 Gear Box Cover Kit, Secondary 3 99091 1 Electric Conveyor Drive Kit 99085 1 Conveyor Motor Kit 4 99094 1 Drive Shaft Kit, Electric 7 99077 1 Electrical Box Assembly 5 99087 1 Gear Box Kit ns 99744 1 Label Kit, SH Electrical Control Box Item 1 9909 Electric Power Group Mount Kit 8 9959 1 Electric Power Group Mount 1/ Flat Washer SS 9 1/-13 x 1-3/4 Carriage Bolt SS 1/-13 Locknut SS Item 99089 Gear Box Bracket Kit 9 1/-13 x 1-3/4 Carriage Bolt SS ns 99775 1 Cable Boot, 8-Pin 1/ Flat Washer SS 14 3/8- x 1 Hex Cap Screw SS 1/-13 Locknut SS 15 3/8 Flat Washer SS 1 1 Gear Box Bracket 4 3/8 Lock Washer SS 13 1 Cable Boot Stand 17 3/8- Hex Nut SS Item 3 99091 Electric Conveyor Drive Kit 4 99094 1 Drive Shaft Kit, Electric 99085 1 Conveyor Motor Kit 5 99087 1 Gear Box Kit Item 4 99094 Drive Shaft Kit, Electric 3/8 Lock Washer SS 0 93 3/8 Flat Washer SS 17 3/8- Hex Nut SS 1 9453 1 Flange Bearing, 1.15 ID 18 3/8- x 1-1/ Carriage Bolt SS 99479 Sprocket Kit 19 1 Drive Shaft Assembly 3 330 1 1" Retaining Ring Item 5 99087 Gear Box Kit 4 9907 1 Gear Box x X Worm Gear 4 M8 Lock Washer SS 5 4 M8 x 1.5 x Hex Cap Screw SS Item 99085 Conveyor Motor Kit 4 3/8 Lock Washer SS 8 1 Motor 1/-hp NEMA 5C 7 4 3/8- x 3/4 Hex Cap Screw SS Item 7 99077 Electrical Box Assembly 1/ Flat Washer SS 30 99570 1 Electrical Box Latch Kit (pkg of ) 14 3/8- x 1 Hex Cap Screw SS 31 99195 8 Break-Thru Plug 15 3/8 Flat Washer SS 3 9954 3 Switch, Push Button 3/8 Lock Washer SS 33 1 0.5 Grommet 9 999 1 Electrical Box 34 99080 1 CHMSL Kit SS = Stainless Steel M = Metric ns = not shown Lit. No. 437, Rev. 0 5 January 15, 019
CHUTE ASSEMBLY 1 5 1 13 3 9 4 18 7 19 17 15 14 17 15 8 18 14 Lit. No. 437, Rev. 0 January 15, 019
Chute Assembly Item Part Qty Description Item Part Qty Description 1 9913* 1 Short Chute Assembly Complete 5 9913 1 Chute Attachment Kit 9909* 1 Long Chute Assembly Complete 9958 1 Magnetic Chute Interlock Kit 3 938 1 Chute Upper Section 7 99139 1 Chute Middle Section Kit 4 99098 Handle Kit 8 99137 1 Chute Lower Section Kit Item 4 99098 Handle Kit 9 1/4-0 x 1-1/4 Hex Cap Screw SS 1/4-0 Locknut GB SS 4 1/4 Flat Washer SS Item 5 9913 Chute Attachment Kit 1 3/8 x 8-1/4 Chute Pin 13 3/3 x -1/4 Cotter Pin Item 7 99139 Chute Middle Section Kit 1 Chute Extension, Electric 4 3/8 Lock Washer SS 1/4 Flat Washer SS 17 4 3/8- Hex Nut SS 1/4-0 Locknut GB SS 18 1/4-0 x 3/4 Hex Cap Screw 14 4 3/8- x 3/4 Hex Cap Screw SS 19 9907 1 Chute Motor Cover 15 4 3/8 Flat Washer SS Item 8 99137 Chute Lower Section Kit 1 Lower Chute Body 15 4 3/8 Flat Washer SS 1/4 Flat Washer SS 4 3/8 Lock Washer SS 1/4-0 Locknut GB SS 17 4 3/8- Hex Nut SS 14 4 3/8- x 3/4 Hex Cap Screw SS 18 1/4-0 x 3/4 Hex Cap Screw SS SS = Stainless Steel G = Grade * Includes spinner and shutter assemblies shown on following page. Not used in the 9913 short chute assembly. Lit. No. 437, Rev. 0 7 January 15, 019
SPINNER DRIVE & SHUTTER ASSEMBLIES 7 14 15 17 1 1 1 8 9 13 0 1 18 19 4 3 5 3 3 4 4 5 4 5 9 30 31 5 5 3 7 8 34 17 33 3 7 8 7 8 Lit. No. 437, Rev. 0 8 January 15, 019
Spinner Drive & Shutter Assemblies Item Part Qty Description Item Part Qty Description 1 950 1 Chute Drive Service Kit 4 9504 1 Chute Shutter Bearing Kit 99485 1 Poly Spinner Kit 5 939 1 Shutter Bearing Support Kit 3 99135 1 Shutter Replacement Kit 9501 Bearing Kit Item 1 950 Chute Drive Service Kit 7 930 1 Motor 1V 1/3-hp 13 931 1 -Tooth Pulley, Drive Gear 8 780 1 40-Tooth Cogged Belt Pulley 3/4 Bore ns 9914 1 Bolt Bag, Chute Service Kit 9 M1355 1 Spinner Drive Belt 14 1 1/4-0 x 3 Hex Cap Screw SS 998 1 Spinner Shaft 15 1 1/4-0 Locknut GB SS 1 Spinner Motor Tensioner Plate # Flat Washer SS 1 9977 1 Spinner Motor Spring SS 17 #-3 Locknut GB SS Item 99485 Poly Spinner Kit 18 1 Spinner, Black Poly CW Rotation 0 5/ Flat Washer SS 19 1 5/-18 x -1/4 Hex Cap Screw SS 1 1 5/-18 Locknut GB SS Item 3 99135 Shutter Replacement Kit 1 Chute Shutter 4 1 Chute Shutter Bearing Inner 3 9505 1 Shutter Lock Pin Kit 5 9915 1 Bolt Bag Shutter Item 4 9504 Chute Shutter Bearing Kit 4 1 Chute Shutter Bearing Inner 1 Chute Shutter Bearing Outer 5 9915 1 Bolt Bag Shutter Item 5 939 Shutter Bearing Support Kit ns 959 1 Bolt Bag, Shutter Bearing Support Kit 9 4 3/8- x 3/4 Hex Cap Screw SS 7 4 3/8 Lock Washer SS 30 4 3/8 Flat Washer SS 8 4 3/8- Hex Nut SS 31 1 Chute Lower Bearing Support Item 9501 Bearing Kit 7 4 3/8 Lock Washer SS 3 4 3/8- x 1-1/4 Carriage Bolt 8 4 3/8- Hex Nut SS 33 97 1 Pillow Block Bearing 3/4 Bore Item 5 9915 Bolt Bag Shutter 4 # Flat Washer SS 8 4 3/8- Hex Nut SS 17 4 #-3 Locknut GB SS 3 4 3/8- x 1-1/4 Carriage Bolt 7 4 3/8 Lock Washer SS 34 4 #-3 x 1/ # Pan-Head Screw SS SS = Stainless Steel ns = not shown G = Grade Lit. No. 437, Rev. 0 9 January 15, 019
ELECTRICAL COMPONENTS 9 1 1 13 14 3 8 4 5 7 Lit. No. 437, Rev. 0 January 15, 019
Cables & Harnessing, Electrical Components Item Part Qty Description Item Part Qty Description 1 7840 1 Vehicle Side Harness Kit 9939 1 -Pin Connector w/switch 990 1 Hopper Harness Assembly Connector 3 78987 1 Conveyor Motor Cable 7 78385 1 Cable Module to Isolated Stud 4 7831 1 Cable Assembly Spinner Motor Block 5 785 1 Cable Assembly Chute Spinner 8 99 1 Plug Cover Motor ns 9977 1 Motor Terminal Cover Kit (pkg of ) Item 1 7840 Vehicle Side Harness Kit 9 990 1 Vehicle Control Harness 13 9583 1 Fuse, 0A 7057 1 Vehicle Harness Assembly 14 95837 1 Fuse Holder/Isolated Stud Block (incl. item ) ns Cable Tie, HD 5.5" 99759 1 Plug Cover ns Cable Tie, 15.35" 1 5 1 " Battery Cable Red Electrical Box Components 14 95837 1 Fuse Holder/Isolated Stud Block 15 5385 1 Spreader Module, 4-Post ns = not shown 14 15 Lit. No. 437, Rev. 0 January 15, 019
CAB CONTROL 1 VIBRATE LIGHT STROBE PREWET Material Width Material Flow ON/OFF BLAST 5 MIN MAX MIN MAX 4 3 7 9 8 Cab Control Item Part Qty Description Item Part Qty Description 1 99534 1 Cab Control Kit 3 5345 1 Cab Control Bracket Kit 99774 1 Cab Control -Knob Item 1 99534 Cab Control Kit 99774 1 Cab Control -Knob 3 5345 1 Cab Control Bracket Kit Item 3 5345 Cab Control Bracket Kit 4 1 Control Bracket, Inner 8 1/4-0 x 1/ Pan Head Machine 5 1 Control Bracket, Outer Screw SS Black 3 # x 3/8 Pan Head Tapping 9 1/4 Shoulder Washer SS Black Screw SS 1/4 Lock Washer SS 7 4 #8 x 3/8 Pan Head Machine Screw 1/4-0 Hex Nut G5 Black SS = Stainless Steel G = Grade Lit. No. 437, Rev. 0 1 January 15, 019
ACCESSORIES Accessory Kits Part Description Part Description 99139 Chute Middle Section/Extension Kit 7840* Vehicle-Side Harness Kit 998 License Plate Light Kit 99488 Hopper Side Extension Kit 99505-1 Primary Work Light Kit 953 Truck Mount Kit, Bars 7' & 8' Hoppers 9973-1 Secondary Work Light Kit 9533 Truck Mount Kit, 3 Bars 9' Hopper 99494 Strobe Light Kit 9990 Tie-Down Kit SH, Chain 78 Vibrator Kit * Contains all vehicle-side electrical components except control. Pre-Wet Kits Part Description Part Description 7400 Standard Pump Kit, On-Off System 745 50-Gallon Tank Kit ( x 5 gal) 740 Deluxe Pump Kit, Full-Feature System 7450 0-Gallon Tank Kit ( x 50 gal) 7405 Pre-Wet Pump Switch Kit Lit. No. 437, Rev. 0 13 January 15, 019
Western Products PO Box 45038 Milwaukee, WI 534-9538 www.westernplows.com A DIVISION OF DOUGLAS DYNAMICS, LLC Copyright 019 Douglas Dynamics, LLC. All rights reserved. This material may not be reproduced or copied, in whole or in part, in any printed, mechanical, electronic, fi lm, or other distribution and storage media, without the written consent of Western Products. Authorization to photocopy items for internal or personal use by Western Products outlets or spreader owner is granted. Western Products reserves the right under its product improvement policy to change construction or design details and furnish equipment when so altered without reference to illustrations or specifi cations used. Western Products or the vehicle manufacturer may require or recommend optional equipment for spreaders. Do not exceed vehicle ratings with a spreader. Western Products offers a limited warranty for all spreaders and accessories. See separately printed page for this important information. The following are registered ( ) or unregistered ( ) trademarks of Douglas Dynamics, LLC: Striker, WESTERN. Printed in U.S.A. Lit. No. 437, Rev. 0 14 January 15, 019