KV series. Innovatively detachable Manifold Block. Smart Solenoid Valve (plug-in type, D-SUB multi-connector type)

CAT.1101E-S www.sym1.com KV series Innovatively detachable Manifold Block (DIN Rail Mounting) Smart Solenoid Valve (Plug-in type, D-SUB multi-connector ) Compact size with large flow capacity Exceedingly long life (more than 50 million cycles) Stable response and high reliability at high-speed Fitting attached valve and manifold DIN Rail mounting Easy piping maintenance and innovatively detachable Manifold Block Smart Solenoid Valve (plug-in type) D-SUB (multi-connector) with 15-pin connector and adopting non-polar type for user s convenience Easy manual operation Improved soft-touch manual button KV series, 5-port Solenoid Valve / Pilot Type Innovatively detachable Manifold Block Smart Solenoid Valve (plug-in type, D-SUB multi-connector type) DIN Rail Mounting / Body Ported MKV100B MKV00B MKV00B

INDEX Safety. Precautions.... 5 Model selection. 10 Driving speed chart of cylinders 10 5-port Solenoid Valve [p.11~p.5] How to order KV series.... 11 KV series.. 1 KV100 series.... 1 KV00 series..... 1 KV00 series. 8 Manifold Block. 5 Manifold Block (D-SUB connector type). Smart Solenoid Valve. 9 (Plug-in type, D-SUB multi-connector type) KV100 series KV00 series KV00 series Manifold Block

INDEX -port Solenoid Valve [p.55~p.7] KV190 90 90. 55 Manifold Block. 0 Body ported type 5-port Air Pilot Valve [p.8~p.81] How to order KVA series, Specifications KVA100 series 8 70 Body ported type Body mounted type KVA00 series 7 KVA00 series 78 -port Air Pilot Valve [p.8~p.8] How to order KVA series, Specifications 8 Dimensions of KVA190 90 90 8 KVA190..... KVA90...... KVA90...... 8 85 8 Body ported type Manifold Assembly Order Form [p.87~ p.91] Manifold Block Assembly order form (5-port Solenoid Valve) Smart Solenoid Valve Assembly order form 87 90 Manifold Block Assembly order form 91 (-port Solenoid Valve,, 5-port Air Pilot Valve)

PRECAUTION Be sure to read before handling. These safety instructions are intended to prevent a hazardous situation and/or equipment damage. These instructions indicate the level of potential hazard by a label of Caution, Warning, or Danger. To ensure safety, be sure to observe ISO1 1), KS B 7 ) and other safety regulations. Caution Operator error could result in injury or equipment damage. Warning Operator error could result in serious injury or loss of life. Danger In extreme conditions, this could result in serious injury or loss of life. 1) ISO 1: Pneumatic Fluid Power-Recommendations for the application of equipment to transmission and control systems. ) KS B 7: General Rules for Pneumatic System Caution 1. The pneumatic equipment shall be selected by pneumatic system designers or professionals. The person who decides specifications has a responsibility for the performance and safety.. Only trained person should operate pneumatically operated machinery and equipment. Compressed air can be dangerous if an operator is unfamiliar with it. Assembly, handling or repair of pneumatic systems should be performed by a trained and experienced operator.. Don't remove components until safety is confirmed. 1) Inspection of machinery and equipment should only be performed after confirmation of safe locked-out control positions. ) When equipment is to be removed, confirm the safety process as mentioned above. Cut the supply pressure for this equipment and exhaust all residual compressed air in the system. ) When restarting, take measures to prevent shooting-out of cylinder piston rod, etc.. Take care if the product is to be used in any of the following conditions. Please feel free to contact us if you have any questions. 1) Conditions and environments beyond the given Specifications, or if product is used outdoors. ) Installation on equipment in conjunction with food and beverages, medical equipment, vehicles, nuclear energy, railway, airplane, emergency stop circuits, press clutches, brake equipment or safety equipment. ) An application requiring special safety.

PRECAUTION: Valve Be sure to read before handling. Air Supply Warning 1. Use clean air Use clean air which doesn't contain chemicals, synthetic oils containing organic solvents, salts or corrosive gases etc., because this can cause damage or malfunction. Caution 1. Filteration to 5µm is recommended.. Large quantity of drainage may cause incorrect operation of pneumatic products as well as environmental contamination. Please control drainage. You can use the filter with auto drainage in case of difficulty.. Please install a mist separator when there is a large amount of carbon power from the compressor. Environment Warning 1. Keep away from corrosive gas, chemical solutions, sea water, rain and steam.. Avoid using in an explosive atmosphere.. Don't use in locations subject to vibration or impact.. Avoid direct sunlight. 5. Shield radiated heat generated by nearby heat sources.. Use a protective cover when installed in a place where a drop of water or oil will splash momentarily. 7. Please install a silencer on the exhaust port in a dusty place. Valve Operation Warning 1. Actuator drive Take appropriate measures to prevent potential danger caused by actuator operation when an actuator is to be driven using a solenoid valve.. Intermediate stopping Accurate stop of the piston in a predetermined position is not possible due to the compressibility of air when a -positon closed center valve is used to stop a cylinder at a intermediate position. Furthermore, it may not be possible to hold a stopped position for an extended length of time since valves and cylinders are not guaranteed for zero air leakage.. Effect of back pressure You need to be careful when using valves on a manifold because actuator malfunction due to back pressure may occur. Your special attention should be taken when using a -postion exhaust center valve or driving a single acting cylinder. Implement countermeasures such as the use of an individual exhaust spacer assembly when there is a danger of back pressure.. Since valves are subjected to air leakage, they cannot be used for applications such as holding pressure. 5. Can't be used as an emergency shutoff valve, etc.. Release of residual pressure Provide residual pressure lease function for maintenance purposes. Special consideration should be given to the release of residual pressure between the valve and cylinder in case of a -position closed center type valve. Installation Caution 1. Confirm the Specifications. Don t operate at pressures or temperatures beyond the range of specifications because this can cause damage or malfunction. Lubrication Caution 1. No further lubrication is required because valves are prelubricated.. Please use turbine oil ( ISO VG or equivalent to ) if lubricant is required. Once lubrication is applied, it must be continued because the original lubricant may be eliminated. Caution 1. Momentary energization If a double solenoid valve will be operated with momentary energization, it should be energized for at least 0.1 second.. Leakage voltage 1) Residual leakage voltage of DC coil must be or less than % 5

PRECAUTION: Valve Be sure to read before handling. when switch is OFF. ) When using a C-R element, there might be a chance to increase the leakage voltage.. Low temperature operation Avoid ambient temperatures outside the range prescribed in the Specifications. At low temperatures, appropriate measures should be taken to avoid solidification of freezing of drainage and moisture, etc.. Operation for air blowing You should use external pilot type or direct solenoid operated type when using solenoid valves for air blowing. Also, supply compressed air within the pressure range prescribed in the specifications, especially for an external pilot type. 5. Mounting In case of a single solenoid valve, the mounting orientation is unrestricted. Double solenoid or -posiotn valves should be mounted so that the spool is horizontal. Mount valves so that the spool is at a right angle to the direction of vibration in a place where vibration or shock exists. Piping Caution 1. Before piping is connected, remove chips, cutting oil and other debris form inside the pipe.. When using the Teflon tape, ensure that about 1.5~ threads are left. Low temperature operation Caution Avoid ambient temperatures outside the range prescribed in the Specifications. At low temperatures, appropriate measures should be taken to avoid solidification of freezing of drainage and moisture, etc. Maintenance Warning 1. When equipment is removed, first confirm that measures are in place to prevent dripping of work pieces and run-away of equipment, etc. Then cut the supply pressure and power, and exhaust all compressed air from the system using its residual pressure release function. When the equipment is to be started again after remounting or replacement, first confirm that measures are in place to prevent lurching of actuators, etc., and then confirm that the equipment is operating normally.. Although don't use frequently, operate the valve regularly to prevent malfunction. Caution 1. Drainage removal Remove drainage regularly from air filter. Wrappinjg direction Using -port valve threads to be left exposed Teflon type Caution If you block one side of valve port (A, B) with plug, you can use the valve as -port valve with N.O. (Normally Open) or N.C. (Normally Closed) type.. When using -position closed center type, make sure piping leakage does not occur between valve and cylinder.. Clamping torque Port size Appropriate clamping torque N m (kgf cm) M5 1.5~ (15~0) Rc(PT) 1/8 7~9 (70~90) Rc(PT) 1/ 1~1 (10~10) Rc(PT) /8 ~ (0~0) Rc(PT) 1/ 8~0 (80~00) Rc(PT) / 8~0 (80~00) Rc(PT) 1 ~8 (0~80) It is convenient when you need -port valve in the manifold blocks. Plug position B port A port Configuration N.C. N.O. Single Solenoid Double (X) PLUG (X) PLUG B A B A R P R1 R P R1 (X) PLUG (X) PLUG B A B A R P R1 R P R1

PRECAUTION: KV series Be sure to read before handling. Manual Operation Warning 1. Without an electric signal for the solenoid valve, the manual operation is used for switching the main valve.. Make sure that there is no danger, since manual operation can make any connected equipment operate Disconnection For pulling-out the socket from the connector, pull out the lead wire while pushing the hook of socket by a stick with a fine point. If the socket is re-used as it is, reposition the hook again. Socket Connector Push-locking slotted type Push-locking lever type Hook Lead wire. Crimping connection of lead wire and socket Peel. to 7 mm of tip of lead wire, and insert the core wires into a socket and crimp using a crimping too. Be careful so that the insulation cover of lead wire does not interface with the crimping part. Pressing the button makes the valve operate. The valve can be kept in the manual override position by turning in the clockwise direction while keeping it pressed. Release the button after turning in the counterclockwise direction when you get off. Please twin the button softiy. (under 0.1N.m if you use push-locking slotted type) Crimping area Core wire crimping area Core wire Lead wire How to use Plug Connector Hook Insulation cover Caution 1. Connection / Disconnection of connector Push the connector straight onto the pins of the solenoid, making sure the lip of the lever is securely positioned in the groove of the solenoid cover. Disconnection Press the lever and pull the connector away from the solenoid. Lamp and Surge Voltage Suppressor Caution DC Circuit Diagram (Non polar) (-) Pin (Standard) (-) DC SOL. + (Z type) DC SOL. - (-) (S type) DC SOL. Polarity indication(dc) (-) Groove Connector lever Hook Socket Lead wire AC Circuit Diagram AC110V R R R LED D SOL.. Connection / Disconnection of socket with lead wire Insert a socket into the square hole of connector, pushing fully the lead wire and lock by hanging the hook of socket to the seat of connector. (Pushing-in can open the hook and lock it automatically.) Then confirm the locking by light pulling of the lead wire. AC0V R R R R LED D SOL. 7

KV series, 5-port Solenoid Valve / Pilot Type www.sym1.com

Model Selection Series Effective area (Cv) Configuration Voltage Electrical entry Lamp and surge voltage suppressor KV100.0 mm (0.) -position single E-type Plug Connector 5 1 Body Ported KV00 10.5 mm (0.58) -position double AC 110V KV00 1.0 mm (0.9) KV100B.0 mm (0.) -position closed center 5 1 5 1 AC 0V DC V DC 1V DC V Lead Wire (L) Indicator lamp and surge voltage suppressor Body Ported Base Mounted Base Mounted KV00B 1.5 mm (0.7) KV00B. mm (1.) -position exhaust center -position pressure center Special orders P-type Plug Connector Driving speed chart of cylinders/pressure 0.5 MPa, Load factor 50% This chart only be used as a reference because cylinder speed will vary depending on the connecting pipe work. Series Cv KV100 0. KV00 0.58 KV00 0.9 KV100B 0. KV00B 0.7 KV00B 1. Cylinder speed (mm/s) 150 00 50 00 750 150 00 50 00 750 150 00 50 00 750 150 00 50 00 750 150 00 50 00 750 150 00 50 00 750 5 1 5 1 MC series Inside diameter of cylinder (mm) SC series Ø10 Ø1 Ø0 Ø5 Ø Ø0 Ø0 Ø50 Ø Ø80 Ø100 10

KV series 5-port Air Pilot Valve / Pilot Type HOW TO ORDER KV 1 1 0 B - E S - C Body Ported, Base Mounted 5-PORT SOLENOID VALVE SERIES PORT SIZE - (B), (A) 1 KV100 (width: 10 mm) KV00 (width: 15 mm) KV00 (width: 18 mm) CONFIGURATION 1 5 -position single -position double -position closed center 5 1 -position exhaust center 5 1 -position pressure center 5 1 5 1 5 1 BODY TYPE - Body ported B Base mounted FUNCTION - Standard type X External pilot (Base mounted) COIL VOLTAGE 1 AC 110V AC 0V DC 1V DC V DC V 9 Others Base Mounted Body Ported Port size KV100 KV00 KV00 C One-touch fitting for Ø C One-touch fitting for Ø C8 One-touch fitting for Ø8 M5 M5 thread 01 Rc(PT) 1/8 0 Rc(PT) 1/ - No sub-base 01 Rc(PT) 1/8 0 Rc(PT) 1/ 0 Rc(PT) /8 LAMP AND SURGE VOLTAGE SUPPRESSOR - Standard type (non-polar) Z Polar lamp - with Diode (DC) S Non-polar lamp - with surge voltage suppressor Refer to the PAGE 7. CONNECTOR P plug connector type is unavailable for AC coil voltage. P-type Plug Connector (with 00 mm lead wire) P-type Plug Connector (no connector) P PN HOW TO ORDER CONNECTOR E-type Plug Connector (with 00 mm lead wire) E-type Plug Connector (no connector) CA - V - E EN Connector Ass'y COIL VOLTAGE LEAD WIRE LENGTH V1 V V AC 110V AC 0V DC voltage - 00 mm 00 mm 10 1,000 mm 15 1,500 mm L Lead Wire (with 00 mm lead wire) LL Lead Wire (00 mm lead wire) 0,000 mm 5,500 mm 0,000 mm 50 5,000 mm 11

KV100 00 00 5-port Air Pilot Valve / Pilot Type Body Ported SPECIFICATIONS Fluid Air or Inert Gases Pressure range Single 0.15~0. 7MPa (1.5~7.1 kgf/cm ) -position Double 0.1~0.7 MPa (1.0~7.1 kgf/cm ) -position 0.~0.7 MPa (.0~7.1 kgf/cm ) Ambient and fluid temp. Note 1) Max. 50 C Max. Sycles/Second Lubrication Manual operation -position -position 5 C/S C/S Not required Push-locking slotted type, Push-locking lever type Shock / Vibration resistance 150/0m/s Protective structure Dust-proof Rated voltage of coil AC 110V, 0V DC V, 1V, V Allowance voltage Coil insulation Power consumption Indicator lamp ±10% of rated voltage Class B or equivalent (10 C) AC110V: 1.0 VA, AC0V:.0 VA, DC: 1W LED Note 1) Use dry air to prevent condensation when operating at low temperature under 5 C. BODY PORTED Series Configuration Model Effective area (Cv) Inside diameter of cylinder Response time Note ) Weight (g) KV100 -position single KV110 1 ms or less 1..0 mm Note ) (0.) -position double KV10 10 ms or less.7 -position closed center -position exhaust center KV10 KV10 Cylinder speed less than 150 mm/s: Ø50 Cylinder speed less than 00 mm/s: Ø0.5 mm (0.) Note ) 5 ms or less 9. -position pressure center KV150 KV00 -position single KV10 15 ms or less 5. 10.5 mm (0.58) -position double KV0 1 ms or less 7.9 -position closed center -position exhaust center KV0 KV0 Cylinder speed less than 150 mm/s: Ø80 Cylinder speed less than 00 mm/s: Ø50 8.0 mm (0.) 5 ms or less 79. -position pressure center KV50 KV00 -position single KV10 5 ms or less 88.1 1.0 mm (0.9) -position double KV0 15 ms or less 105. -position closed center -position exhaust center KV0 KV0 Cylinder speed less than 150 mm/s: Ø100 Cylinder speed less than 00 mm/s: Ø 1.5 mm (0.75) 0 ms or less 11.5 -position pressure center KV50 Note ) KS B 5 (Supply pressure: 0.5 MPa[5.1kgf/cm ], with indicator light and surge voltage suppressor). The response time depends on the pressure and quality of the compressed air. Note ) When C (One-touch fitting for Ø) is used with manifold block. 1

KV100B 00B 00B 5-port Air Pilot Valve / Pilot Type Base Mounted 5-PORT SOLENOID VALVE SPECIFICATIONS Fluid Air or Inert Gases Pressure range Single 0.15~0. 7MPa (1.5~7.1 kgf/cm ) -position Double 0.1~0.7 MPa (1.0~7.1 kgf/cm ) -position 0.~0.7 MPa (.0~7.1 kgf/cm ) Ambient and fluid temp. Note 1) Max. 50 C Max. Sycles/Second Lubrication Manual operation -position -position 5 C/S C/S Not required Push-locking slotted type, Push-locking lever type Shock / Vibration resistance 150/0m/s Protective structure Dust-proof Rated voltage of coil AC 110V, 0V DC V, 1V, V Allowance voltage Coil insulation Power consumption Indicator lamp ±10% of rated voltage Class B or equivalent (10 C) AC110V: 1.0 VA, AC0V:.0 VA, DC: 1W LED Note 1) Use dry air to prevent condensation when operating at low temperature under 5 C. BASE MOUNTED Weight (g) Series Configuration Model Effective area (Cv) Inside diameter of cylinder Response time Note ) No base With base KV100B -position single KV110B 1 ms or less 0. 58.5.0 mm (0.) -position double KV10B 10 ms or less 5.8 7.0 -position closed center -position exhaust center KV10B KV10B Cylinder speed less than 150 mm/s: Ø50 Cylinder speed less than 00 mm/s: Ø0.5 mm (0.) 5 ms or less 8. 7. -position pressure center KV150B KV00B -position single KV10B 15 ms or less 5. 111. 1.5 mm (0.7) -position double KV0B 1 ms or less 70.7 18.1 -position closed center -position exhaust center KV0B KV0B Cylinder speed less than 150 mm/s: Ø80 Cylinder speed less than 00 mm/s: Ø50 9.0 mm (0.5) 5 ms or less 77.0 1. -position pressure center KV50B KV00B -position single KV10B 5 ms or less 81. 18.5. mm (1.) -position double KV0B 15 ms or less 98.5 0.7 -position closed center -position exhaust center KV0B KV0B Cylinder speed less than 150 mm/s: Ø100 Cylinder speed less than 00 mm/s: Ø 18.0 mm (1.0) 0 ms or less 10.7 11.9 -position pressure center KV50B Note ) KS B 5 (Supply pressure: 0.5 MPa [5.1kgf/cm ], with indicator light and surge voltage suppressor). The response time depends on the pressure and quality of the compressed air. 1

CONSTRUCTION / PARTS KV100 series BODY PORTED BASE MOUNTED 5 1 5 1 5 1 5 1 7 -position single KV110 -position single KV110B 5 1 5 1 5 1 5 1 5 1 5 1 -position double KV10 -position double KV10B 7 5 1 5 1 5 1 5 1 5 1 5 1 7 -position closed center Exhaust center Pressure center -position closed center Exhaust center Pressure center KV10 KV10 KV150 KV10B KV10B KV150B 5 1 5 1 5 1 5 1 5 1 5 1 No. Description Material No. Description Material BODY ADC-1 ADAPTER PLASTIC SPOOL Al NBR COIL ASS'Y - END COVER PLASTIC BASE ADC-1 PISTON PLASTIC 1

DIMENSIONS / -POSITION SINGLE KV100 series BASE MOUNTED KV110 - E - C, C, M5 E-type Plug Connector 00 78 (58.5) -Ø. 10.5 5-PORT SOLENOID VALVE B(), A() Port=C, C, M5 (C: One-touch fitting for Ø) (C: One-touch fitting for Ø) (M5: M5 thread) 5. 8. C=10.5 0.85 10 11.7 C=1.5 -Ø. P.E. Port -M5X0.8P P(1), R(, 5) Port 8 (8.5) 8 (8.5) 7 8.5 7 M5=1.0 17. 10 (58.5) 10 10 KV110 - L - C, C, M5 Lead Wire (L) KV110 - P - C, C, M5 P-type Plug Connector 00 00 15

DIMENSIONS / -POSITION DOUBLE KV100 series BODY PORTED KV10 - E - C, C, M5 E-type Plug Connector 00 58.5 117 10.5 7 B(), A() Port=C, C, M5 (C: One-touch fitting for Ø) (C: One-touch fitting for Ø) (M5: M5 thread) 5. 8. 17. C=10.5 0.85 10 C=1.5 11.7 M5=1.0 P.E. Port -M5X0.8P P(1), R(, 5) Port 8.5 97 (8.5) 97 7 8.5 10 -Ø. 58.5 10 10 KV10 - L - C, C, M5 Lead Wire (L) KV10 - P - C, C, M5 P-type Plug Connector Length) = ~ 00 00 1

DIMENSIONS / -POSITION CLOSED CENTER, EXHAUST CENTER, PRESSURE CENTER KV100 series BODY PORTED KV10/10/150 - E - C, C, M5 E-type Plug Connector 00 58.5 15.5 10.5 5-PORT SOLENOID VALVE 5. 10 P.E. Port -M5X0.8P P(1), R(, 5) Port 8.5 105.5 (8.5) 105.5 7 8.5 7 17. 8. 10 0.85 11.7 B(), A() Port=C, C, M5 (C: One-touch fitting for Ø) (C: One-touch fitting for Ø) (M5: M5 thread) C=10.5 C=1.5 M5=1.0 -Ø. 58.5 10 10 KV10/10/150 - L - C, C, M5 Lead Wire (L) KV10/10/150 - P - C, C, M5 P-type Plug Connector Length) = ~ 00 00 17

DIMENSIONS / -POSITION SINGLE KV100B series BASE MOUNTED KV110B - E - 01 E-type Plug Connector 00 79 5 -Ø. 1.5 1 0.5 (58.5) 78 P.E. Port 1.5 1.5 5-Rc(PT) 1/8 (P, A, B, R1, R Port) 8 (8.5) 8 (8.5) 7.5 58.5 10 1. 7. 1 10 0 7.5 9.5 A(), B() Port 10 M5X0.8P (External Pilot) KV110B - L - 01 Lead Wire (L) KV110B - P - 01 P-type Plug Connector 00 00 1 1 9 9 18

DIMENSIONS / -POSITION DOUBLE KV100B series BASE MOUNTED KV10B - E - 01 E-type Plug Connector 00 -Ø. 117 5 1.5 5-PORT SOLENOID VALVE 97 (8.5) 97 (8.5) 7.5 58.5 10 0 1. 7. 7.5 1 0.5 (58.5) 1 10 A(), B() Port 10 5-Rc(PT) 1/8 (P, A, B, R1, R Port) -P.E. Port 1.5 1.5 M5X0.8P (External Pilot) KV10B - L - 01 Lead Wire (L) KV10B - P - 01 P-type Plug Connector Length) = ~ 00 00 1 1 19

DIMENSIONS / -POSITION CLOSED CENTER, EXHAUST CENTER, PRESSURE CENTER KV100B series BASE MOUNTED KV10/10/150B - E - 01 E-type Plug Connector 00 -Ø. 15.5 5 1.5 1 0.5 (58.5) -P.E. Port 5-Rc(PT) 1/8 (P, A, B, R1, R Port) 1.5 1.5 M5X0.8P (External Pilot) (8.5) 105.5 (8.5) 105.5 7.5 58.5 10 0 1. 7. 1 10 7.5 A(), B() Port 10 KV10/10/150B - L - 01 Lead Wire (L) KV10/10/150B - P - 01 P-type Plug Connector Length) = ~ 00 00 1 1 0

CONSTRUCTION / PARTS KV00 series BODY PORTED BASE MOUNTED 5 1 5 1 5 1 5 1 5-PORT SOLENOID VALVE 7 -position single KV10 -position single KV10B 5 1 5 1 5 1 5 1 5 1 5 1 7 -position double -position double KV0 KV0B 5 1 5 1 5 1 5 1 5 1 5 1 7 -position closed center Exhaust center Pressure center -position closed center Exhaust center Pressure center KV0 KV0 KV50 KV0B KV0B KV50B 5 1 5 1 5 1 5 1 5 1 5 1 No. Description Material No. Description Material BODY ADC-1 ADAPTER PLASTIC SPOOL Al NBR COIL ASS'Y - END COVER PLASTIC BASE ADC-1 PISTON PLASTIC 1

DIMENSIONS / -POSITION SINGLE KV00 series BODY PORTED KV10 - E - C, C, C8, 01 E-type Plug Connector 00 9. (5) -Ø.8 1.5 8 (55) 8. (55) 8. 1.5.5 0 1.5 7 11 15 B(), A() Port=C, C8, 01 (C: One-touch fitting for Ø) (C8: One-touch fitting for Ø8) (01: Rc(PT) 1/8) C=1.5 C8=15, 01=0 1. -Ø. (5) 1 1 P.E. Port Rc(PT) 1/8 P(1) Port -Rc(PT) 1/1 R1(), R(5) Port KV10 - L - C, C, C8, 01 Lead Wire (L) KV10 - P - C, C, C8, 01 P-type Plug Connector Length) = ~ 00 00

DIMENSIONS / -POSITION DOUBLE KV00 series BODY PORTED KV0 - E - C, C, C8, 01 E-type Plug Connector 00 (5) -Ø.8 10 1.5 5-PORT SOLENOID VALVE 8 1. -Ø. (5) 1 1 (55) 110 (55) 110 1.5 1.5.5 7 0 11 15 B(), A() Port=C, C8, 01 (C: One-touch fitting for Ø) (C8: One-touch fitting for Ø8) (01: Rc(PT) 1/8) C=1.5 C8=15,01=0 P.E. Port Rc(PT) 1/8 P(1) Port -Rc(PT) 1/1 R1(), R(5) Port KV0 - L - C, C, C8, 01 Lead Wire (L) KV0 - P - C, C, C8, 01 P-type Plug Connector Length) = ~ 00 00

DIMENSIONS / -POSITION CLOSED CENTER, EXHAUST CENTER, PRESSURE CENTER KV00 series BODY PORTED KV0/0/50 - E - C, C, C8, 01 E-type Plug Connector 00 (5) -Ø.8 1 1.5 1.5 B(), A() Port=C, C8, 01 (C: One-touch fitting for Ø) (C8: One-touch fitting for Ø8) (01: Rc(PT) 1/8) 8 1. -Ø. (5) 1 1 (55) 1 (55) 1 1.5 11 7 C=1.5 15 C8=15,01=0.5 0 P.E. Port Rc(PT) 1/8 P(1) Port -Rc(PT) 1/1 R1(), R(5) Port KV0/0/50 - L - C, C, C8, 01 Lead Wire (L) KV0/0/50 - P - C, C, C8, 01 P-type Plug Connector Length) = ~ 00 00

DIMENSIONS / -POSITION SINGLE KV00B series BASE MOUNTED KV10B - E - 0 E-type Plug Connector 00 -Ø.5 9 8 18 5-PORT SOLENOID VALVE (55) 8. (55) 8. 5.5 5 9 5.5 5.5 15 Manual Operation 5 8 (5) 9.5 15.5 9 A(), B() Port P.E. Port 5-Rc(PT) 1/ (P, A, B, R1, R Port) 18 18 1.5 M5X0.8P (External Pilot) KV10B - L - 0 Lead Wire (L) KV10B - P - 0 P-type Plug Connector 00 00 8 5 8 5 5

DIMENSIONS / -POSITION DOUBLE KV00B series BASE MOUNTED KV0B - E - 0 E-type Plug Connector 00 10 8 -Ø.5 18 (55) 110 (55) 110 5.5 5 5.5 15 5 8 (5) 9 15.5 9 Manual Operation A(), B() Port 5-Rc(PT) 1/ (P, A, B, R1, R Port) 18 18 -P.E. Port 1.5 M5X0.8P (External Pilot) KV0B - L - 0 Lead Wire (L) KV0B - P - 0 P-type Plug Connector Length) = ~ 00 00 5

DIMENSIONS / -POSITION CLOSED CENTER, EXHAUST CENTER, PRESSURE CENTER KV00B series BASE MOUNTED KV0/0/50B - E - 0 E-type Plug Connector 00 1 8 18 5-PORT SOLENOID VALVE 5 8 (5) 1.5 18 18 (55) 1 5.5 9 15.5 9 5.5 A(), B() Port 15 Manual operation 5-Rc(PT) 1/ (P, A, B, R1, R Port) -P.E. Port M5X0.8P (External pilot) KV0/0/50B - L - 0 Lead Wire (L) KV0/0/50B - P - 0 P-type Plug Connector (55) 1 Length) = ~ 00 5 00 5 5 7

CONSTRUCTION / PARTS KV00 series BODY PORTED BASE MOUNTED 5 1 5 1 5 1 5 1 7 -position single KV10 5 1 5 1 -position single KV10B 5 1 5 1 5 1 5 1 5 1 -position double 5 1 -position double 7 KV0 KV0B 5 1 5 1 5 1 5 1 5 1 5 1 5 1 5 1 7 -position closed center Exhaust center Pressure center -position closed center Exhaust center Pressure center KV0 KV0 KV50 KV0B KV0B KV50B 5 1 5 1 5 1 5 1 5 1 5 1 5 1 5 1 5 1 5 1 5 1 5 1 No. Description Material No. Description Material BODY ADC-1 ADAPTER PLASTIC SPOOL Al NBR COIL ASS'Y - END COVER PLASTIC BASE ADC-1 PISTON PLASTIC 8

DIMENSIONS / -POSITION SINGLE KV00 series BODY PORTED KV10 - E - C, C8, C10, 0 E-type Plug Connector (Lead = ~ Wire Length) 00 (71.) 107.1 18 -Ø. 5-PORT SOLENOID VALVE 8 (1.7) 97. (1.7) 97. 7.5 9 7.5.5.5 1 18 B(), A() Port=C, C8, C10, 0 (C: One-touch fitting for Ø) (C8: One-touch fitting for Ø8) (C10: One-touch fitting for Ø10) (0: Rc(PT) 1/) C=1.5 C8=15 C10=19 17.8 -Ø. (71.) 1 1 -Rc(PT) 1/8 R1(), R(5) Port P.E. Port Rc(PT) 1/ P(1) Port KV10 - L - C, C8, C10, 0 Lead Wire (L) KV10 - P - C, C8, C10, 0 P-type Plug Connector Length) = ~ 00 00 9

DIMENSIONS / -POSITION DOUBLE KV00 series BODY PORTED KV0 - E - C, C8, C10, 0 E-type Plug Connector 00 71.7 1. 18 -Ø. 8 1 1 (1.7) 1. (1.7) 1. 7.5 9 7.5.5.5 1 18 B(), A() Port=C, C8, C10, 0 (C: One-touch fitting for Ø) (C8: One-touch fitting for Ø8) (C10: One-touch fitting for Ø10) (0: Rc(PT) 1/) C=1.5 C8=15 C10=19 17.8 -Ø. (71.) -Rc(PT) 1/8 R1(), R(5) Port -P.E. Port Rc(PT) 1/ P(1) Port KV0 - L - C, C8, C10, 0 Lead Wire (L) KV0 - P - C, C8, C10, 0 P-type Plug Connector Length) = ~ 00 00 0

DIMENSIONS / -POSITION CLOSED CENTER, EXHAUST CENTER, PRESSURE CENTER KV00 series BASE MOUNTED KV0/0/50 - E - C, C8, C10, 0 E-type Plug Connector 00 (71.) 15. 18 -Ø. 5-PORT SOLENOID VALVE 8 (1.7) 1. Length) 1. = ~ 00 (1.7) 7.5 9 7.5.5.5 1 18 B(), A() Port=C, C8, C10, 0 (C: One-touch fitting for Ø) (C8: One-touch fitting for Ø8) (C10: One-touch fitting for Ø10) (0: Rc(PT) 1/) C=1.5 C8=15 C10=19 17.8 -Ø. (71.) 1 1 -Rc(PT) 1/8 R1(), R(5) Port -P.E. Port Rc(PT) 1/ P(1) Port KV0/0/50 - L - C, C8, C10, 0 Lead Wire (L) KV0/0/50 - P - C, C8, C10, 0 P-type Plug Connector 00 1

DIMENSIONS / -POSITION SINGLE KV00B series BASE MOUNTED KV10B - E - 0 E-type Plug Connector 00 -Ø.5 10. 5 1 5 (71.) 107.1 97. (1.7) 97. (1.7) 5 5.5 1.5 11.5.5 0 1.5 5 18 5 5 Manual Operation A(), B() Port P.E. Port 5-Rc(PT) /8 (P, A, B, R1, R Port) 1 1 M5X0.8P (External Pilot) KV10B - L - 0 Lead Wire (L) KV10B - P - 0 P-type Plug Connector Length) = ~ 00 00 9.7 9.7

DIMENSIONS / -POSITION DOUBLE KV00B series BASE MOUNTED KV0B - E - 0 E-type Plug Connector 00 1. 5 -Ø.5 1 5 5-PORT SOLENOID VALVE 1. (1.7) 1. (1.7) 5 5.5 1.5 11.5.5 0 1.5 5 18 5 5 Manual Operation A(), B() Port 5-Rc(PT) /8 (P, A, B, R1, R Port) 1 1 -P.E. Port M5X0.8P (External Pilot) KV0B - L - 0 Lead Wire (L) KV0B - P - 0 P-type Plug Connector Length) = ~ 00 00

DIMENSIONS / -POSITION CLOSED CENTER, EXHAUST CENTER, PRESSURE CENTER KV00B series BASE MOUNTED KV0/0/50 - E - 0 E-type Plug Connector 00 15. 5 1 5 (71.) 1 1 (1.7) 1. (1.7) 1. 5 5.5.5 1.5 11.5 0 1.5 5 A(), B() Port 18 5 5 Manual Operation 5-Rc(PT) /8 (P, A, B, R1, R Port) -P.E. Port M5X0.8P (External Pilot) KV0/0/50B - L - 0 Lead Wire (L) KV0/0/50B - P - 0 P-type Plug Connector Length) = ~ 00 00

MANIFOLD BLOCK MKV100, 00, 00 HOW TO ORDER MKV 1 0 0-05 DS - D Body Ported 5-PORT SOLENOID VALVE SERIES 1 KV100 series KV00 series KV00 series FIXING - Standard type D DIN Rail mounting ELECTRICAL ENTRY SPECIFICATIONS MODEL MKV100 MKV00 MKV00 1(P), 5(R) style Common SUP/Common EXH Valve stations ~0 stations Port size 1(P), 5(R) Rc(PT)1/8 Rc(PT)1/ - Connector DS STATIONS Multi-connector (D-SUB connector) Please refer to Multi-connector (D-SUB Connector) on page 1~. 0 stations 0 0 stations Weight (1n+) g (5n+) g (n+8) g HOW TO ORDER VALVE (BODY PORTED) KV 1 1 0 - E - C SERIES 1 KV100 (width: 10 mm) KV00 (width: 15 mm) KV00 (width: 18 mm) CONFIGURATION 1 -position single -position double -position closed center -position exhaust center 5 -position pressure center COIL VOLTAGE 1 AC 110V AC 0V DC 1V DC V DC V 9 Others PORT SIZE - (B), (A) Port size KV100 KV00 KV00 C One-touch fitting for Ø C One-touch fitting for Ø C8 One-touch fitting for Ø8 M5 M5 thread 01 Rc(PT)1/8 0 Rc(PT)1/ ELECTRICAL ENTRY P P-type Plug Connector (with 00 mm lead wire) E E-type Plug Connector (with 00 mm lead wire) L Lead Wire (00 mm lead wire) PN P-type Plug Connector (no connector) EN E-type Plug Connector (no connector) LL Lead Wire (00 mm lead wire) 5

MANIFOLD BLOCK MKV100B, 00B, 00B Base Mounted HOW TO ORDER SERIES 1 KV100B series KV00B series KV00B series MKV 1 0 0 B - 05 C DS - D STATIONS 0 stations 0 0 stations FIXING - Standard type D DIN Rail mounting ELECTRICAL ENTRY - Connector DS Multi-connector (D-SUB connector) Please refer to multi-connector (D-SUB Connector) on page 1~. PORT SIZE - (B), (A) SPECIFICATIONS MODEL MKV100B MKV00B MKV00B 1(P), 5(R) style Common SUP/Common EXH Valve stations ~0 stations 1(P), 5(R) Rc(PT)1/8 Rc(PT)1/ 1(P) - Rc(PT)/8 Port size 5(R) - Rc(PT)1/ Port size KV100B KV00B KV00B C One-touch fitting for Ø C One-touch fitting for Ø C8 One-touch fitting for Ø8 M5 M5 thread 01 Rc(PT)1/8 0 Rc(PT)1/ (B), (A) C, C, M5 C, C, C8, Rc(PT)1/8 C, C8, Rc(PT)1/ Weight (0n+70) g (5n+78) g (9n+15) g HOW TO ORDER VALVE (BASE MOUNTED) KV 1 1 0 B - - E SERIES 1 KV100 (width: 10 mm) KV00 (width: 15 mm) KV00 (width: 18 mm) CONFIGURATION 1 -position single -position double -position closed center -position exhaust center 5 -position pressure center FUNCTION - Standard X External pilot ELECTRICAL ENTRY P P-type Plug Connector (with 00 mm lead wire) E E-type Plug Connector (with 00 mm lead wire) L Lead Wire (00 mm lead wire) PN P-type Plug Connector (no connector) EN E-type Plug Connector (no connector) LL Lead Wire (00 mm lead wire) COIL VOLTAGE 1 AC 110V AC 0V DC 1V DC V DC V 9 Others

DIMENSIONS / MKV100 Body Ported MKV190 - stations - D E-type Plug Connector 5-PORT SOLENOID VALVE 78 (Single) 117 (Double) 15.5 ( Position) 1.5 0.5 1.5 (.1) 7. 7. 1 L1 (10.5n+17.5) L (10.5n+9.5) Pitch=10.5 Manual Operation (.5) 5. -Ø.5 15. 0 59 (1).5 C=10.5 C=1.5 M5=1.0 (L) (L) n-c, C, M5 (A, B Port) = ~ 00 Length) (C: One-touch fitting for Ø) (C: One-touch fitting for Ø) (M5: M5 thread) 1. 8 P.E. Port -Rc(PT) 1/8 (P, R1, R Port) Lead Wire (L) P-type Plug Connector 105.5 ( Position) 97 (Double) Length) = ~ 00 105.5 ( Position) 97 (Double) 8 (Single) Length) = ~ 00 (.1) 8 (Single) L n 0 0 0 05 0 07 08 09 10 11 1 1 1 15 1 17 18 19 0 L1 8.5 9 59.5 70 80.5 91 101.5 11 1.5 1 1.5 15 1.5 175 185.5 19 0.5 17 7.5 L 0.5 1 51.5 7.5 8 9.5 10 11.5 15 15.5 1 15.5 17 177.5 188 198.5 09 19.5 L.5 75 87.5 100 100 11.5 15 17.5 150 1.5 175 175 187.5 00 1.5 5 7.5 7.5 50 L 7 85.5 98 110.5 110.5 1 15.5 18 10.5 17 185.5 185.5 198 10.5 5.5 8 8 0.5 7

DIMENSIONS / MKV100B Base Mounted MKV100B - stations port size - D E-type Plug Connector (5.) (1) 8.5 9.5 -Rc(PT) 1/8 (P, R1, R Port) 1 0.5 1 50.5 -M5X0.8P (External Pilot) C=10.5 C=1.5 M5=1.0 (5.) (5.) 1 7.5.5 8.5 18.5 1.5 1.5 1 L1 (10.5n+17.5) L (10.5n+9.5) Pitch=10.5 (L) (L) 1 5.5 15.5 Pitch=10.5 Manual Operation = ~ 00 Length) -Ø.5.7 1.5 78 (Single) 117 (Double) 15.5 ( Position) n-c, C, M5 (A, B Port) (C: One-touch fitting for Ø) (C: One-touch fitting for Ø) (M5: M5 thread) P.E. Port Lead Wire (L) Length) = ~ 00 105.5 ( Position) 97 (Double) 8 (Single) P-type Plug Connector Length) = ~ 00 105.5 ( Position) 97 (Double) 8 (Single) L n 0 0 0 05 0 07 08 09 10 11 1 1 1 15 1 17 18 19 0 L1 8.5 9 59.5 70 80.5 91 101.5 11 1.5 1 1.5 15 1.5 175 185.5 19 0.5 17 7.5 L 0.5 1 51.5 7.5 8 9.5 10 11.5 15 15.5 1 15.5 17 177.5 188 198.5 09 19.5 L.5 75 87.5 100 100 11.5 15 17.5 150 1.5 175 175 187.5 00 1.5 5 7.5 7.5 50 L 7 85.5 98 110.5 110.5 1 15.5 18 10.5 17 185.5 185.5 198 10.5 5.5 8 8 0.5 8

DIMENSIONS / MKV00 Body Ported MKV00 - stations - D E-type Plug Connector Manual Operation 5-PORT SOLENOID VALVE L1 (1n+0) L (1n+10) 58 18 Pitch=1 58 5 = ~ 00 Length) () 75 19 9. (Single) 10 (Double) 1 ( Position) -Ø.5 (L) (L) 5.5 C=1.5 C8=15 n-c, C8, 01 (A, B Port) (C: One-touch fitting for Ø) (C8: One-touch fitting for Ø8) (01: Rc(PT) 1/8) 1 11 P.E Port -Rc(PT) 1/ (P, R1, R Port) 0 58 0 () 9.5 (1) Lead Wire (L) P-type Plug Connector Length) = ~ 00 1 ( Position) 110 (Double) 8. (Single) Length) = ~ 00 () 1 ( Position) 110 (Double) 8. (Single) L n 0 0 0 05 0 07 08 09 10 11 1 1 1 15 1 17 18 19 0 L1 5 8 8 100 11 1 18 1 180 19 1 8 0 7 9 08 0 L 58 7 90 10 1 18 15 170 18 0 18 50 8 98 1 0 L 75 87.5 11.5 15 17.5 1.5 175 187.5 00 5 7.5 50 75 87.5 00 1.5 7.5 50.5 L 85.5 98 1 15.5 18 17 185.5 198 10.5 5.5 8 0.5 85.5 98 10.5 8 0.5 7 9

DIMENSIONS / MKV00B Base Mounted MKV00B - stations port size - D E-type Plug Connector Manual Operation (8.) 70.8 9. (Single) 10 (Double) 1 ( Position) 5 17 10.8 -Rc(PT) 1/ (P, R1, R Port).5 (8.) 8 (1) 8 L1 (1n+0) 5 L(1n+10) 18 Pitch=1 -Ø.5.5 8 1 19 58.5 C=1.5 C8=15 -M5X0.8P (External Pilot) (8.) 79.5 (L) (L) 1 Pitch=1 = ~ 00 Length) n-c, C8, 01 (A, B Port) (C: One-touch fitting for Ø) (C8: One-touch fitting for Ø8) (01: Rc(PT) 1/8) P.E. Port 18 Lead Wire (L) Length) = ~ 00 1 ( Position) 110 (Double) 8. (Single) P-type Plug Connector Length) = ~ 00 1 ( Position) 110 (Double) 8. (Single) L n 0 0 0 05 0 07 08 09 10 11 1 1 1 15 1 17 18 19 0 L1 5 8 8 100 11 1 18 1 180 19 1 8 0 7 9 08 0 L 58 7 90 10 1 18 15 170 18 0 18 50 8 98 1 0 L 75 87.5 11.5 15 17.5 1.5 175 187.5 00 5 7.5 50 75 87.5 00 1.5 7.5 50.5 L 85.5 98 1 15.5 18 17 185.5 198 10.5 5.5 8 0.5 85.5 98 10.5 8 0.5 7 0

DIMENSIONS / MKV00 Body Ported MKV00 - stations - D E-type Plug Connector 5-PORT SOLENOID VALVE 0 58 0 -Rc(PT) 1/ (P, R1, R Port) (.7) (.7) 5.5 1 Pitch=19 L1 (19n+) L (19n+11) (L) (L) 5.5 = ~ 00 Length) Manual Operation (.) 81. (5) 19 107.1 (Single) 1. (Double) 15. ( Position) -Ø.5 1.5 C=1.5 C8=15 C10=19 n-c, C8, C10, 0 (A, B Port) (C: One-touch fitting for Ø) (C8: One-touch fitting for Ø8) (C10: One-touch fitting for Ø10) (0: Rc(PT) 1/) 1 11 P.E. Port (1) Lead Wire (L) P-type Plug Connector Length) = ~ 00 1. ( Position) 1. (Double) 97. (Single) Length) = ~ 00 1. ( Position) 1. (Double) 97. (Single) L n 0 0 0 05 0 07 08 09 10 11 1 1 1 15 1 17 18 19 0 L1 1 80 99 118 17 15 175 19 1 51 70 89 08 7 5 8 0 L 9 8 87 10 15 1 1 18 01 0 7 5 77 9 15 5 7 91 L 87.5 100 15 17.5 1.5 187.5 00 5 7.5.5 75 00 1.5 7.5 50 75 87.5 1.5 5 L 98 110.5 15.5 18 17 198 10.5 5.5 8 7 85.5 10.5 8 0.5 85.5 98 5.5 1

DIMENSIONS / MKV00B Base Mounted MKV00B - stations port size - D E-type Plug Connector -Rc(PT) /8 (P Port) 1.5 1 8 -M5X0.8P (External Pilot) -Rc(PT) 1/ (R1, R Port) C=1.5 C8=15 C10=19 (.7) 1. ( Position) 1. (Double) 97. (Single) (.7) 1. ( Position) 1. (Double) 97. (Single) 8.5 80 11 L1 (0n+) L (0n+10) Pitch=0 (L) (L) = ~ 00 Length) Manual Operation (.) -Ø.5 (5) 80.1 0.5 107.1 (Single) 1. (Double) 15. ( Position) n-c, C8, C10, 0 (A, B Port) (C: One-touch fitting for Ø) (C8: One-touch fitting for Ø8) (C10: One-touch fitting for Ø10) (0: Rc(PT) 1/) (1) 8.5 1 7.5 P.E. Port 19 1.5 19.5 8.8 9. Lead Wire (L) P-type Plug Connector Length) = ~ 00 00 L n 0 0 0 05 0 07 08 09 10 11 1 1 1 15 1 17 18 19 0 L1 7 9 11 1 15 17 19 1 5 7 9 1 5 7 9 1 L 50 70 90 110 10 150 170 190 10 0 50 70 90 10 0 50 70 90 10 L 100 11.5 17.5 1.5 175 00 1.5 7.5.5 75 00 1.5 7.5.5 75 00 1.5 7.5.5 L 110.5 1 18 17 185.5 10.5 8 7 55.5 10.5 8 7 85.5 10.5 8 7

MANIFOLD BLOCK MKV100, 00, 00 HOW TO ORDER Body Ported (D-SUB connector type) 5-PORT SOLENOID VALVE MKV 1 0 0-05 DS - D SERIES 1 KV100 series KV00 series KV00 series FIXING - Standard D DIN Rail mounting ELECTRICAL ENTRY DS Multi-connector (D-SUB connector) SPECIFICATIONS MODEL MKV100 MKV00 MKV00 STATIONS 05 5 stations 1(P), 5(R) style Valve stations Common SUP/Common EXH 5~1 stations 1 1 stations Port size 1(P), 5(R) Rc(PT)1/8 Rc(PT)1/ Weight (1.5n+1) g (7.5n+1) g (.5n+) g HOW TO ORDER VALVE (BODY PORTED) KV 1 1 0 - E - C SERIES 1 KV100 (width: 10 mm) KV00 (width: 15 mm) KV00 (width: 18 mm) CONFIGURATION 1 -position single -position double -position closed center -position exhaust center 5 -position pressure center COIL VOLTAGE 1 AC 110V AC 0V DC 1V DC V DC V 9 Others PORT SIZE - (B), (A) Port size KV100 KV00 KV00 C One-touch fitting for Ø C One-touch fitting for Ø C8 One-touch fitting for Ø8 M5 M5 thread 01 Rc(PT)1/8 0 Rc(PT)1/ ELECTRICAL ENTRY P P-type Plug Connector (with 00 mm lead wire) E E-type Plug Connector (with 00 mm lead wire) L Lead Wire (00 mm lead wire) PN P-type Plug Connector (no connector) EN E-type Plug Connector (no connector) LL Lead Wire (00 mm lead wire)

DIMENSIONS / MKV100 Body Ported (D-SUB Connector) MKV100 - stations DS - D E-type Plug Connector + + + + + + + + + + + + + + + + Length) = ~ 00 -Ø.5 5. 15. 78 (Single) 117 (Double) 15.5 ( Position) (19.9) (0.1) (1) C=10.5 C=1.5 7. M5=1.0 0 1. 8.5 1 Pitch=10.5 (L5) L (10.5n+9.5) L1 (10.5n+17.5) (L) (L) (Manual Operation) (.5) n-c, C, M5( A, B Port) (C: One-touch fitting for Ø) (C: One-touch fitting for Ø) (M5: M5 thread) P.E. Port (.5) (1.) 1.5 0.5 1.5 -Rc(PT)1/8 (P, R1, R Port) L n 05 0 07 08 09 10 11 1 L1 70 80.5 91 101.5 11 1.5 1 1.5 L 7.5 8 9.5 10 11.5 15 15.5 L 100 100 11.5 15 17.5 150 1.5 175 L 110.5 110.5 1 15.5 18 10.5 17 185.5 L5 70 80.5 91 101.5 11 1.5 1 1.5

DIMENSIONS / MKV00 Body Ported (D-SUB Connector) MKV00 - stations DS - D E-type Plug Connector 5-PORT SOLENOID VALVE (L) (L) = ~ 00 Length) 58 5 18 (Manual Operation) () 75 19 9. (Single) 10 (Double) 1 ( Position) (C: One-touch fitting for Ø) (C8: One-touch fitting for Ø8) (01: Rc(PT)1/8) 5.5 Pitch=1 (L5) L1 (1n+0) L (1n+10) -Ø.5 n-c, C8, 01 (A, B Port) C=1.5 C8=15 1 11 P.E. Port (19.9) () (.5) (1.) 0 58 0 -Rc(PT)1/ (P, R1, R Port) (1) n L 05 0 07 08 09 10 11 1 L1 100 11 1 18 1 180 19 1 L 90 10 1 18 15 170 18 0 L 15 17.5 1.5 175 187.5 00 5 7.5 L 15.5 18 17 185.5 198 10.5 5.5 8 L5 100 11 1 18 1 180 19 1 5

DIMENSIONS / MKV00 Body Ported (D-SUB Connector) MKV00 - stations DS - D E-type Plug Connector (L5) Length) = ~ 00 (.) 81. 19 107.1 (Single) 1. (Double) 15. ( Position) n-c, C8, C10.0 (A, B Port) (C: One-touch fitting for Ø) (C8: One-touch fitting for Ø8) (C10: One-touch fitting for Ø10) (0: Rc(PT)1/) 5.5 1.5 1 Pitch=19 L1 (19n+) L (19n+11) (L) (L) (Manual Operation) -Ø.5 C=1.5 C8=15 C10=19 1 11 P.E. Port (19.9) () (.5) (1.) 0 58 0 -Rc(PT)1/ (P, R1, R Port) (1) n L 05 0 07 08 09 10 11 1 L1 118 17 15 175 19 1 51 L 10 15 1 1 18 01 0 7 L 17.5 1.5 187.5 00 5 7.5.5 75 L 18 17 198 10.5 5.5 8 7 85.5 L5 118 17 15 175 19 1 51

OPTIONS KV series BLANK PLATE BP - KV100 BP - KV00 BP - KV00 This is used when removing the valve for maintenance, or reserving a valve mounting space on the manifold for future use. 5-PORT SOLENOID VALVE BLANK PLUG TP 000 - W TP 000 - W White When dosing ports not required. SILENCER This is used when reducing the noise of exhaust port. INDIVIDUAL SPACER SP - KV100 - P SP - KV100B - P SP - KV100 - R SP - KV100B - R Individual SUP. spacer Individual EXH. spacer This is used when you construct the fluid passage of individual supply or individual exhaust to valve at manifold block. 1.0 1.0 M5 59. M5 R1. 9.8 7. P R (Individual SUP. spacer Ass'y) (Individual EXH. spacer Ass'y) 7

ELECTRICAL WIRING SPECIFICATIONS D-SUB Connector Terminal No. 1 station station station station 5 station station 7 station 8 station 9 station 10 station 11 station 1 station { { { SOL.A { SOL.B SOL.A { { { { { { { SOL.A SOL.B SOL.A SOL.B SOL.A SOL.B SOL.B SOL.A SOL.B SOL.A SOL.B SOL.A SOL.B SOL.A SOL.B SOL.A SOL.B SOL.A SOL.B SOL.A { SOL.B COM. Terminal No. 1 1 15 1 17 5 18 19 7 0 8 1 9 10 11 1 5 1 Polarity (-) Lead wire Marking color color (wire) Black - Black White Brown - Brown White Red - Red White Orange - Orange Black Yellow - Yellow Black Green - Green White Blue - Blue White Violet - Violet White Gray - Gray Black White - White Black White Red Gray Red Light green - Pink - Azure - Irrespective of the valves or options, the internal wiring is connected to SOL.A and SOL.B for respective stations of the manifold. CABLE ASSEMBLY Multicore Vinyl Cable 0. mm 5C Ø10 L 9.7-0 UNC 8.7 55 Socket 17 7.0 Terminal No. Cable length (L) Assembly Note 1.5 m DSC5-1500 m DSC5-000 Cable 5-core AWG 5 m DSC5-5000 8

Smart Solenoid Valve MKV100B, 00B, 00B HOW TO ORDER Plug-in type/d-sub multi-connector type 5-PORT SOLENOID VALVE MKV 1 0 0 B - 05 C DS - D SERIES 1 KV100B series KV00B series KV00B series STATIONS 05 5 stations FIXING - Standard D DIN Rail mounting ELECTRICAL ENTRY DS Multi-connector (D-SUB connector) 1 1 stations PORT SIZE - (B), (A) Port size MKV100B MKV00B MKV00B SPECIFICATIONS MODEL MKV100B MKV00B MKV00B 1(P), 5(R) style Common SUP/Common EXH Valve stations 5~1 stations 1(P), 5(R) Rc(PT)1/8 Rc(PT)1/ 1(P) - Rc(PT)/8 Port size 5(R) - Rc(PT)1/ C One-touch fitting for Ø C One-touch fitting for Ø C8 One-touch fitting for Ø8 M5 M5 thread 01 Rc(PT) 1/8 0 Rc(PT) 1/ (B), (A) C, C, M5 C, C, C8, Rc(PT)1/8 C, C8, Rc(PT)1/ Weight (.5n+88) g (5.5n+9) g (98.5n+17) g HOW TO ORDER VALVE KV 1 1 0 B - Q Smart Solenoid Valve plug-in type SERIES 1 KV100 (width: 10 mm) KV00 (width: 15 mm) KV00 (width: 18 mm) CONFIGURATION COIL VOLTAGE DC 1V DC V DC V 9 Others 1 -position single -position double -position closed center -position exhaust center 5 -position pressure center 9

DIMENSIONS / SMART SOLENOID VALVE MKV100B MKV100B R P R1 L1 (10.5n+17.5).0 L (10.5n+9.5) 1.0 Pitch=10.5 A A A A Manual Operation (5.0) 5.5 0. 8. (Single) 97. (Double) 105.8 ( Position) -Ø.5 n-c, C, M5 (A, B Port) (C: One-touch fitting for Ø) (C: One-touch fitting for Ø) (M5: M5 thread).5 0.0 17.0 1.5 8.5 18.5 57.1 A B B B B B R1 P R.5 Pitch = 10.5 8.0 1. -Rc(PT) 1/8 (P, R1, R Port) 5.0 1.1 15. 7.5 1.8 7.7 C=10.5 C=1.5 M5=1.0 n L 0 0 0 05 0 07 08 09 10 11 1 1 L1 8.5 9 59.5 70 80.5 91 101.5 11 1.5 1 1.5 15 L 0.5 1 51.5 7.5 8 9.5 10 11.5 15 15.5 1 L.5 75 87.5 100 11.5 15 17.5 150 1.5 175 187.5 00 L 7 85.5 98 110.5 1 15.5 18 10.5 17 185.5 198 10.5 DIN Rail Fixed DIN Rail Type 1.0 5.0 L L 1.0 18.8 55.0 50

DIMENSIONS / SMART SOLENOID VALVE MKV00B MKV00B Manual Operation L1 (1n+0) 5 L (1n+10) 18 Pitch = 1 R1 A A A A P R B B B B R1 P R A B 7 1.5 Pitch=1 5-PORT SOLENOID VALVE -Ø.5 5.8 5.8 5. 8. (Single) 110.1 (Double) 15.1 ( Position) n-c, C8, 01(A, B Port) (C: One-touch fitting for Ø) (C8: One-touch fitting for Ø8) (01: Rc(PT)1/8).7.7 0. 15. 9. 8 1.5.5. -Rc(PT)1/ (P, R1, R Port) 1.8 1..1 19. 1.0 C=1.5 / C8=15 n L 0 0 0 05 0 07 08 09 10 11 1 1 L1 5 8 8 100 11 1 18 1 180 19 1 8 L 58 7 90 10 1 18 15 170 18 0 18 L 75 87.5 11.5 15 17.5 1.5 175 187.5 00 5 7.5 50 L 85.5 98 1 15.5 18 17 185.5 198 10.5 5.5 8 0.5 DIN Rail Fixed DIN Rail Type 5.0 L L 1.0 1.0 7.8 55.0 51

A A A A L1 (0n+) 11 L (0n+10) 15 Pitch=0 -Ø.5.5 8.9 8. 97. (Single) 1. (Double) 1.8 ( Position) 10.9 9.5 Pitch=0 n-c, C8, C10, 0 (A, B Port) (C: One-touch fitting for Ø) (C8: One-touch fitting for Ø8) (C10: One-touch fitting for Ø10) (0: Rc(PT)1/) 5.0 B B B B DIMENSIONS / SMART SOLENOID VALVE MKV00B MKV00B Manual Operation R P R1 A B R1 P R 8. 50.8 0.8 5.1 18.1 11.1 -Rc(PT) /8(P Port). 17.5 7. 1.5 7. -Rc(PT)1/ (R1, R Port) 9. 17.5.9 C=1.5 C8=15 / C10=19 n L 0 0 0 05 0 07 08 09 10 11 1 1 L1 7 9 11 1 15 17 19 1 5 7 9 L 50 70 90 110 10 150 170 190 10 0 50 70 L 100 11.5 17.5 1.5 175 00 1.5 7.5.5 75.5 00 1.5 L 110.5 1 18 17 185.5 10.5 8 7 55.5 10.5 DIN Rail Fixed DIN Rail Type L L 1.0 1 9. 55.0 5

ELECTRICAL WIRING SPECIFICATIONS Smart Solenoid Valve D-Sub Connector 1 Station 1 9 10 11 1 5 1 1 7 15 8 Station Station Station 5 Station Station Terminal No. 7 Station { SOL.B SOL.A { { { { { Terminal Lead wire Marking No. Polarity color color (wire) SOL.A 1 Black - 9 Black White Brown - SOL.B 10 Brown White SOL.A Red - SOL.B 11 Red White SOL.A Orange - SOL.B 1 Orange Black SOL.A 5 Yellow - SOL.B 1 Yellow Black SOL.A Green - SOL.B 1 Green White SOL.A 7 Blue - COM. 15 Blue White COM. 8 (-) Violet - 5-PORT SOLENOID VALVE Irrespective of the valves or options, the internal wiring is connected to SOL.A and SOL.B for respective stations of the manifold. CABLE ASSEMBLY Multicore Vinyl Cable 0. mm 15C Ø7 L 5.9-0 UNC 17 8.7 9.5 9 - - - - - - - - 15 Socket 1 - - - - - - - - - - - - 8.5 Terminal No. Cable length (L) Assembly Note 1.5 m DSC15-1500 m DSC15-000 Cable 5-core AWG 5 m DSC15-5000 5

HOW TO ORDER SERIES 1 KV100B series KV00B series KV00B series MKV PORT SIZE - (B), (A) 1 0 0 B - 05 C DS - D STATIONS ELECTRICAL ENTRY 0 stations 0 0 stations - Connector DS Multi-connector (D-SUB connector) FIXING - Standard D DIN Rail mounting Port size MKV100B MKV00B MKV00B Port size MKV100B MKV00B MKV00B C One-touch fitting for Ø M5 M5 thread C One-touch fitting for Ø 01 Rc(PT) 1/8 C8 One-touch fitting for Ø8 0 Rc(PT) 1/ C10 Smart Solenoid Valve Assembly Order Form One-touch fitting for Ø10 Base Mounted (plug-in type) ORDER NO. : DATE : Company Name Quantity set(s) Delivery Date Order Example (MKV100B-08) MKV100B-08C (1 set) KV110B-Q ( sets) KV10B-Q (1 set) KV10B-Q (1 set) KV10B-Q KV10B-Q KV110B-Q HOW TO ORDER VALVE KV 1 1 0 B - Q LEFT RIGHT,,, 1 Stations MKV100B-08C SERIES CONFIGURATION COIL VOLTAGE 1 KV100B series (width: 10 mm) 1 -position single 1 AC 110V KV00B series (width: 15 mm) -position double AC 0V KV00B series (width: 18 mm) -position closed center DC 1V -position exhaust center DC V 5 -position pressure center DC V 9 Others ELECTRICAL ENTRY Q Smart Solenoid Valve/plug-in type 8 7 5 1 Stations Model KV110B-Q KV10B-Q KV10B-Q BP-KV100 Note: MKV100B-08C ASSEMBLY ORDER FORM (SMART SOLENOID VALVE) Item Stations 1 1 11 10 9 8 7 5 1 5 1 -position single -position 5double 1 5 1 -position closed center 5 1 5 1 5 1 -position exhaust 5 1 center 5 1 5 1 5 1 5 1 -position pressure center 5 1 5 1 5 1 5 1 5 1 Blank plate 5 1 5 1 5 1 5 1 5 1 5 1 5 1 5 1 5 1 LEFT Check the mark if required. RIGHT Blank plug Note: 5 Copy this page.

KV190 90 90 -port Solenoid Valve / Pilot Type Body Ported HOW TO ORDER KV 1 9 0 - E S - C SERIES 1 KV100 (width: 10 mm) KV00 (width: 15 mm) KV00 (width: 18 mm) CONFIGURATION 8 N.O. (Normally Open) 1 N.C. (Normally Closed) CONNECTOR P plug connector type is unavailable for AC coil voltage. P P-type Plug Connector (with 00 mm lead wire) E-type Plug Connector (with 00 mm lead wire) PN P-type Plug Connector (no connector) E-type Plug Connector (no connector) Body Ported PORT SIZE - (B), (A) Port size KV190 KV90 KV90 C One-touch fitting for Ø C One-touch fitting for Ø C8 One-touch fitting for Ø8 M5 M5 thread 01 Rc(PT) 1/8 0 Rc(PT) 1/ -PORT SOLENOID VALVE 9 E EN LAMP AND SURGE VOLTAGE SUPPRESSOR 1 - Standard type (non-polar) Z Polar lamp - with Diode (DC) COIL VOLTAGE 1 AC 110V Lead Wire (with 00 mm lead wire) Lead Wire (00 mm lead wire) S Non-polar lamp - with surge voltage suppressor Refer to page 7. AC 0V DC 1V L LL DC V DC V 9 Others HOW TO ORDER CONNECTOR CA - V - LEAD WIRE LENGTH - 00 mm Connector Ass'y 00 mm COIL VOLTAGE 10 1,000 mm V1 AC 110V 15 1,500 mm V AC 0V 0,000 mm V DC voltage 5,500 mm 0,000 mm 50 5,000 mm SPECIFICATIONS Series KV190, KV180 KV90, KV80 KV90, KV80 Fluid Air or Inert Gases Pressure range 0.15~0.7 MPa (1.5~7.1 kgt/cm ) Ambient and fluid temp. Note 1) Max. 50 C Effective area (Cv).0 mm (0.) 10.5 mm (0.58)(0 1 1.0 mm (0.9) Response time Or less than 1 ms Or less than 15 ms Or less than 5 ms Max. Sycles/Second 5 C/S 5 C/S 5 C/S Lubrication Not required Weight(g) 8. 9.0 7. Note 1) Use dry air to prevent condensation when operating at low temperature under 5 C. 55

CONSTRUCTION / PARTS -port Solenoid Valve 5 1 5 1 KV180 (N.O.) 1 KV190 (N.C.) 1 1 1 5 1 5 1 KV80 (N.O.) 1 KV90 (N.C.) 1 1 1 5 1 5 1 KV80 (N.O.) 1 KV90 (N.C.) 1 1 1 No. Description Material No. Description Material BODY ADC-1 PISTON PLASTIC SPOOL Al NBR ADAPTER PLASTIC END COVER PLASTIC COIL ASS'Y - 5

DIMENSIONS / N.O. (NORMALLY OPEN), N.C. (NORMALLY CLOSED) -port Solenoid Valve BODY PORTED KV190 - E - C, C, M5 E-type Plug Connector 00 9.5 5. -Ø. 1. 59.5.8 59.5.8 7 8.5 0.85 7 17. 8. 10 11.7 A() Port=C, C, M5 (C: One-touch fitting for Ø) (C: One-touch fitting for Ø) (M5: M5 thread) C=10.5 C=1.5 M5=1.0 -PORT SOLENOID VALVE Ø. 15. 59.5 10.8 P.E. Port -M5X0.8P P(1), R() Port KV190 - L - C, C, M5 Lead Wire (L) KV190 - P - C, C, M5 P-type Plug Connector 00 00 57

DIMENSIONS / N.O. (NORMALLY OPEN), N.C. (NORMALLY CLOSED) -port Solenoid Valve BODY PORTED KV90 - E - C, C, C8, 01 E-type Plug Connector 00 8. 59. -Ø.8.7 P.E. Port 7. 9..7 7. 9.7.7.5.5 0 7 11 15 0 A() Port=C, C8, 01 (C: One-touch fitting for Ø) (C8: One-touch fitting for Ø8) (01: Rc(PT) 1/8) C=1.5 C8=15, 01=0 -Ø. 1.5. 7 1 Rc(PT) 1/1 R() Port Rc(PT) 1/8 P(1) Port KV90 - L - C, C, C8, 01 Lead Wire (L) KV90 - P - C, C, C8, 01 P-type Plug Connector 00 00 58

DIMENSIONS / N.O. (NORMALLY OPEN), N.C. (NORMALLY CLOSED) -port Solenoid Valve BODY PORTED KV90 - E - C, C8, C10, 0 E-type Plug Connector 00 9 5 9 -Ø. 8. 7 -Ø. 71 1.5 P.E. Port Rc(PT) 1/8 R() Port Rc(PT) 1/ P(1) Port 8 55 9 55 8 9 7.5 9 7.5.5.5 1 18 A() Port=C, C8, C10, 0 (C: One-touch fitting for Ø) (C8: One-touch fitting for Ø8) (C10: One-touch fitting for Ø10) (0: Rc(PT) 1/) C=1.5 C8=15 C10=19 -PORT SOLENOID VALVE KV90 - L - C, C8, C10, 0 Lead Wire (L) KV90 - P - C, C8, C10, 0 P-type Plug Connector Length) = ~ 00 00 59

MANIFOLD BLOCK MKV190, 90, 90 Body Ported HOW TO ORDER MKV 1 9 0-05 DS - D SERIES 1 KV100 series KV00 series KV00 series FIXING - Standard D DIN Rail mounting ELECTRICAL ENTRY DS Multi-connector (D-SUB connector) STATIONS 05 5 stations 1 1 stations HOW TO ORDER VALVE (BODY PORTED) KV 1 9 0 - E - C SERIES 1 KV100 (width: 10 mm) KV00 (width: 15 mm) KV00 (width: 18 mm) CONFIGURATION N.O. (Normally Open) 8 1 N.C. (Normally Closed) 9 COIL VOLTAGE 1 AC 110V AC 0V DC 1V DC V DC V 9 Others 1 PORT SIZE - (A) Port size KV190 KV90 KV90 C One-touch fitting for Ø C One-touch fitting for Ø C8 One-touch fitting for Ø8 M5 M5 thread 01 Rc(PT)1/8 0 Rc(PT)1/ ELECTRICAL ENTRY P P-type Plug Connector (with 00 mm lead wire) E E-type Plug Connector (with 00 mm lead wire) L Lead Wire (00 mm lead wire) PN P-type Plug Connector (no connector) EN E-type Plug Connector (no connector) LL Lead Wire (00 mm lead wire) 0

DIMENSIONS / MKV190 Body Ported MKV190 - stations - D E-type Plug Connector 1 8. 59.5 8 0.5 8. (1) C=10.5 C=1.5 M5=1.0 L1 (10.5n+17.5) L (10.5n+9.5) Pitch=10.5 (L) (L) Manual Operation (7) 5 17 = ~ 00 9.5 -Ø.5 n-c,c,m5(a() Port) (C: One-touch fitting for Ø) (C8: One-touch fitting for Ø8) (M5: M5 thread) -PORT SOLENOID VALVE Length) -Rc(PT)1/8 (P,R Port) 8.85 1. Lead Wire (L) P-type Plug Connector 59.5 00.8 59.5 15.7 00.8 15.7 L n 0 0 0 05 0 07 08 09 10 11 1 1 1 15 1 17 18 19 0 L1 8.5 9 59.5 70 80.5 91 101.5 11 1.5 1 1.5 15 1.5 175 185.5 19 0.5 17 7.5 L 0.5 1 51.5 7.5 8 9.5 10 11.5 15 15.5 1 15.5 17 177.5 188 198.5 09 19.5 L.5 75 87.5 100 100 11.5 15 17.5 150 1.5 175 175 187.5 00 1.5 5 7.5 7.5 50 L 7 85.5 98 110.5 110.5 1 15.5 18 10.5 17 185.5 185.5 198 10.5 5.5 8 8 0.5 1

DIMENSIONS / MKV190 Body Ported (D-SUB Connector) MKV190 - stations DS - D E-type Plug Connector 1 Pitch=10.5 (L5) L (10.5n+9.5) L1 (10.5n+17.5) (L) (L) (Manual Operation) (7) 5 = ~ 00 9.5 Length) 17 -Ø.5 n-c, C, M5 (A Port) (C: One-touch fitting for Ø) (C: One-touch fitting for Ø) (M5: M5 thread) 8 0.5 C=10.5 C=1.5 8. (0.1) (19.9) M5=1.0 (1) (.5) (1.) 8.85 1. -Rc(PT)1/8 (P,R Port) n L 05 0 07 08 09 10 11 1 L1 70 80.5 91 101.5 11 1.5 1 1.5 L 7.5 8 9.5 10 11.5 15 15.5 L 100 100 11.5 15 17.5 150 1.5 175 L 110.5 110.5 1 15.5 18 10.5 17 185.5 L5 70 80.5 91 101.5 11 1.5 1 1.5

DIMENSIONS / MKV90 Body Ported MKV90 - stations - D -Rc(PT) 1/8 (P, R Port) 5 Pitch=1.5 0.5 8 5 L1 (1n+0) L (1n+10) (L) (L) 18 = ~ 00 Length) (.) 0. 8. 17 -Ø.5 n-c, C8, 01 (A() Port) (C: One-touch fitting for Ø) (C8: One-touch fitting for Ø8) (01: Rc(PT) 1/8) -PORT SOLENOID VALVE 8.85 1. Lead Wire (L) P-type Plug Connector 7. Length) = ~ 00 9. 7..7 Length) = ~ 00 9..7 L n 0 0 0 05 0 07 08 09 10 11 1 1 1 15 1 17 18 19 0 L1 8.5 9 59.5 70 80.5 91 101.5 11 1.5 1 1.5 15 1.5 175 185.5 19 0.5 17 7.5 L 0.5 1 51.5 7.5 8 9.5 10 11.5 15 15.5 1 15.5 17 177.5 188 198.5 09 19.5 L.5 75 87.5 100 100 11.5 15 17.5 150 1.5 175 175 187.5 00 1.5 5 7.5 7.5 50 L 7 85.5 98 110.5 110.5 1 15.5 18 10.5 17 185.5 185.5 198 10.5 5.5 8 8 0.5

DIMENSIONS / MKV90 Body Ported (D-SUB Connector) MKV90 - stations DS - D = ~ 00 0.5 8 5 18 Pitch=1 (L5) L1 (1n+0) L (1n+10) (Manual Operation) n-c, C8, 01(A Port) (C: One-touch fitting for Ø) (C8: One-touch fitting for Ø8) (01: Rc(PT)1/8) (.) 0. 8. 17 -Ø.5 Length) -Rc(PT)1/8 (P, R Port) 8.85 1. n L 05 0 07 08 09 10 11 1 L1 100 11 1 18 1 180 19 1 L 90 10 1 18 15 170 18 0 L 15 17.5 1.5 175 187.5 00 5 7.5 L 15.5 18 17 185.5 198 10.5 5.5 8 L5 100 11 1 18 1 180 19 1

DIMENSIONS / MKV90 Body Ported MKV90 - stations - D Manual Operation 9 5.5.5 5.5 9 (1) 59.5 C=1.5 C8=15 C10=19 L1 (19n+) Pitch=19 1 L (19n+11) (L) (L) = ~ 00 Length) (5) 5 9 -Ø.5 n-c, C8, C10, 0 (A() Port) (C: One-touch fitting for Ø) (C8: One-touch fitting for Ø8) (C10: One-touch fitting for Ø10) (0: Rc(PT) 1/) -PORT SOLENOID VALVE -Rc(PT) 1/ (P, R Port) 10 1 1 Lead Wire (L) P-type Plug Connector Length) = ~ 00 55 8 9 00 55 8 9 L n 0 0 0 05 0 07 08 09 10 11 1 1 1 15 1 17 18 19 0 L1 8.5 9 59.5 70 80.5 91 101.5 11 1.5 1 1.5 15 1.5 175 185.5 19 0.5 17 7.5 L 0.5 1 51.5 7.5 8 9.5 10 11.5 15 15.5 1 15.5 17 177.5 188 198.5 09 19.5 L.5 75 87.5 100 100 11.5 15 17.5 150 1.5 175 175 187.5 00 1.5 5 7.5 7.5 50 L 7 85.5 98 110.5 110.5 1 15.5 18 10.5 17 185.5 185.5 198 10.5 5.5 8 8 0.5 5

DIMENSIONS / MKV90 Body Ported (D-SUB Connector) MKV90 - stations DS - D Length) = ~ 00 (5) 5 9 9 C=1.5 C8=15 (1).5 9 5.5 59.5 1 Pitch=19 (L5) L1 (19n+) L (19n+11) (Manual Operation) -Ø.5 n-c, C8, C10, 0 (A Port) (C: One-touch fitting for Ø) (C8: One-touch fitting for Ø8) (C10: One-touch fitting for Ø10) (0: Rc(PT)1/) C10=19 -Rc(PT)1/8 (P, R Port) 10 1 1 n L 05 0 07 08 09 10 11 1 L1 118 17 15 175 19 1 51 L 10 15 1 1 18 01 0 7 L 17.5 1.5 187.5 00 5 7.5.5 75 L 18 17 198 10.5 5.5 8 7 85.5 L5 118 17 15 175 19 1 51

ELECTRICAL WIRING SPECIFICATIONS D-SUB Connector Terminal No. 1 station station station station 5 station station 7 station 8 station 9 station 10 station 11 station 1 station { { { SOL.A { SOL.B SOL.A { { { { { { { SOL.A SOL.B SOL.A SOL.B SOL.A SOL.B SOL.B SOL.A SOL.B SOL.A SOL.B SOL.A SOL.B SOL.A SOL.B SOL.A SOL.B SOL.A SOL.B SOL.A { SOL.B COM. Terminal No. 1 1 15 1 17 5 18 19 7 0 8 1 9 10 11 1 5 1 Polarity (-) Lead wire Marking color color (wire) Black - Black White Brown - Brown White Red - Red White Orange - Orange Black Yellow - Yellow Black Green - Green White Blue - Blue White Violet - Violet White Gray - Gray Black White - White Black White Red Gray Red Light green - Pink - Azure - -PORT SOLENOID VALVE Irrespective of the valves or options, the internal wiring is connected to SOL.A and SOL.B for respective stations of the manifold. CABLE ASSEMBLY Multicore Vinyl Cable 0. mm 5C Ø10 L 9.7-0 UNC 8.7 55 Socket 17 7.0 Terminal No. Cable length (L) Assembly Note 1.5 m DSC5-1500 m DSC5-000 Cable 5-core AWG 5 m DSC5-5000 7

KVA series 5-port Air Operated Valve HOW TO ORDER KVA 1 1 0 B - C SERIES PORT SIZE - (B), (A) 1 KV100 (width: 10 mm) KV00 (width: 15 mm) KV00 (width: 18 mm) C C Port size KV100 KV00 KV00 One-touch fitting for Ø One-touch fitting for Ø CONFIGURATION 1 -position single -position double 5 1 5 1 -position closed center BODY TYPE - Body ported B Base mounted Body Ported Base Mounted C8 One-touch fitting for Ø8 M5 M5 thread 01 Rc(PT) 1/8 0 Rc(PT) 1/ - No sub-base 01 Rc(PT) 1/8 0 Rc(PT) 1/ 0 Rc(PT) /8 5 1 -position exhaust center 5 1 -position pressure center 5 5 1 SPECIFICATIONS PILOT PRESSURE OF AIR OPERATED VALVE Pressure range Fluid -position Air or Inert Gases Single 0.15~0.7 MPa (1.5~7.1 kgf/cm ) Double 0.1~0.7 MPa (1.0~7.1 kgf/cm ) -position 0.~0.7 MPa (.0~7.1 kgf/cm ) Ambient and fluid temp. Max. 50 C Pilot Pressure range Lubrication Manual operation -position -position (0.7 Pressure + 0.1)~0.7 MPa 0.~0.7 MPa Not required Non Lock Pilot Pressure (kgf/cm ) 5 1 Range of Pilot Pressure 5 Supply Pressure (kgf/cm ) 8

Body Ported, Base Mounted BODY PORTED Series Configuration Model Effective Area (Cv) Pilot Port Size Port size P, R port A, B port Weight (g) KVA100 -position single KVA110.0 mm (0.) Note 1) 18. -position double KVA10 C: Ø One-touch fitting 1.1 -position closed center -position exhaust center KVA10 KVA10.5 mm (0.) M5 0.8 C: Ø One-touch fitting M5: M5 Thread Note 1).7 -position pressure center KVA150 KVA00 -position single KVA10. 10.5 mm (0.58) -position double KVA0 C: Ø One-touch fitting 7.1 P(1) Port: Rc(PT)1/8 C: Ø One-touch fitting -position closed center KVA0 M5 0.8P R(.5)Port: Rc(PT)1/1 C8: Ø8 One-touch fitting -position exhaust center KVA0 8.0 mm (0.) 01: Rc1/8 (PT)Thread 5. -position pressure center KVA50 -position single KVA10 78.0 1.0 mm (0.9) -position double KVA0 85. P(1)Port: Rc(PT) 1/ C: Ø One-touch fitting KVA00 -position closed center KVA0 R(.5)Port: Rc(PT)1/8 C8: Ø8 One-touch fitting 0: Rc1/ (PT)Thread -position exhaust center KVA0 1.5 mm (0.75) 9. -position pressure center KVA50 Note 1) Measure for when using C (one-touch fitting for Ø) on manifold. 5-PORT AIR OPERATED VALVE BASE MOUNTED Series Configuration Model Effective Area (Cv) Pilot Port Size Port size Without Base Weight (g) With Base -position single KVA110B 17. 5.5.0 mm (0.) -position double KVA10B 0 8. KVA100B -position closed center KVA10B Rc(PT)1/8 -position exhaust center KVA10B.5 mm (0.). 50.8 -position pressure center KVA150B -position single KVA10B 1.0 98. 1.5 mm (0.7) -position double KVA0B.9 10. KVA00B -position closed center KVA0B M5 0.8P Rc(PT)1/ -position exhaust center -position pressure center KVA0B KVA50B 9.0 mm (0.5) 51. 108. -position single KVA10B 71. 17.. mm (1.) -position double KVA0B 78.5 18.7 KVA00B -position closed center KVA0B Rc(PT)/8 -position exhaust center KVA0B 18.0 mm (1.0) 8.5 191.7 -position pressure center KVA50B 9

DIMENSIONS / -POSITION DOUBLE 5-port Air Operated Valve BODY PORTED BASE MOUNTED 5 1 5 1 5 1 7 -position single KVA110 5 1 -position single KVA110B 5 1 5 1 5 1 5 1 5 1 7 -position double KVA10 5 1 -position double KVA10B 5 1 5 1 5 1 5 1 5 1 7 5 1 -position closed center Exhaust center Pressure center -position closed center Exhaust center Pressure center KVA10 KVA10 KVA150 KVA10B KVA10B KVA150B 5 1 5 1 5 1 5 1 5 1 5 1 No. Description Material No. Description Material BODY ADC-1 ADAPTER PLASTIC SPOOL Al NBR MANUAL BUTTON - END COVER PLASTIC BASE ADC-1 PISTON PLASTIC 70

DIMENSIONS / -POSITION SINGLE KVA100 series BODY PORTED KVA110 - C, C, M5 -Ø. 7 10.5 19.5 M5X0.8P (Pilot Port) 5. 8. 10 0.85 11.7 B(), A() Port=C, C, M5 (C: One-touch fitting for Ø) (C: One-touch fitting for Ø) (M5: M5 thread) 5 -Ø. 1.5 M5X0.8P.5 (Pilot Port) 1 0.5 (8) 8.5 19.5 10 1. 7. 1 10 0 1.5 9.5 A(), B() Port 10 1.5 17. C=10.5 C=1.5 M5=1.0 10 -Ø. 10 10 BASE MOUNTED KVA110B - 01 0.5 P.E. Port -M5X0.8P P(1), R(, 5) Port 5-PORT AIR OPERATED VALVE P.E. Port 5-Rc(PT) 1/8 (P, A, B, R1, R Port) 1.5 1.5 71

DIMENSIONS / -POSITION DOUBLE KVA100 series BODY PORTED KVA10 - C, C, M5 -Ø. 5 10.5.5 - M5X0.8P (Pilot Port) 5. 5 1.5 10 -Ø. 10 7 10 0.5 17. C=10.5 C=1.5 M5=1.0 8. 10 0.85 11.7 B(), A() Port=C, C, M5 (C: One-touch fitting for Ø) (C: One-touch fitting for Ø) (M5: M5 thread) -P.E. Port -M5X0.8P P(1), R(, 5) Port BASE MOUNTED KVA10B - 01 -Ø. 5 1.5 -M5X0.8P.5 0.5 (Pilot Port) 1 5 (8) 5 10 0 1. 7. 1.5 1 10 A(), B() Port 10 5-Rc(PT) 1/8 (P, A, B, R1, R Port) 1.5 1.5 -P.E. Port 7

DIMENSIONS / -POSITION CLOSED CENTER, EXHAUST CENTER, PRESSURE CENTER KVA100 series BODY PORTED KVA10/10/150 - C, C, M5.5 1 -Ø. 10.5 -M5X0.8P (Pilot Port) 5. 5.5 8. C=10.5 0.85 10 C=1.5 11.7 M5=1.0 B(), A() Port=C, C, M5 (C: One-touch fitting for Ø) (C: One-touch fitting for Ø) (M5: M5 thread) 5 -Ø. 1.5 1. 7. 0 10 -M5X0.8P (Pilot Port).5 0.5 1 5.5 (8).5 10 1 10 1.5 A(), B() Port 1.5 17. 10 -Ø. 55.5 10 10 BASE MOUNTED 0.5 -P.E. Port -M5X0.8P P(1), R(, 5) Port 5-PORT AIR OPERATED VALVE KVA10/10/150B - 01 -P.E. Port 5-Rc(PT) 1/8 (P, A, B, R1, R Port) 1.5 1.5 7

CONSTRUCTION / PARTS KVA00 series BODY PORTED BASE MOUNTED 5 1 5 1 5 1 7 -position single 5 1 -position single KV10 KV10B 5 1 5 1 5 1 5 1 5 1 7 -position double 5 1 -position double KV10 KV10B 5 1 5 1 5 1 5 1 5 1 7 5 1 -position closed center Exhaust center Pressure center -position closed center Exhaust center Pressure center KV0 KV0 KV50 KV0B KV0B KV50B 5 1 5 1 5 1 5 1 5 1 5 1 No. Description Material No. Description Material BODY ADC-1 ADAPTER PLASTIC SPOOL Al NBR MANUAL BUTTON - END COVER PLASTIC BASE ADC-1 PISTON PLASTIC 7

DIMENSIONS / -POSITION SINGLE KVA00 series BODY PORTED KVA10 - C, C, C8, 01 M5X0.8P (Pilot Port) -Ø.8 57.8 8. 1.5 B(), A() Port=C, C8, 01 (C: One-touch fitting for Ø) (C8: One-touch fitting for Ø8) (01: Rc(PT) 1/8) 8.5 11 15.5 0 7 C=1.5 C8=15, 01=0 1. -Ø. 57.5 1 1 BASE MOUNTED P.E. Port Rc(PT) 1/8 P(1) Port -Rc(PT) 1/1 R1(), R(5) Port 5-PORT AIR OPERATED VALVE KVA10B - 0 -Ø.5 8 18 M5X0.8P (Pilot Port) 9 15.5 9. 5.5 A(), B() Port 15 9.5 5 8 (5.7) 8. P.E. Port 5-Rc(PT) 1/ (P, A, B, R1, R Port) 18 18 1.5 75

-Ø.8 71.5 9.5 1.5 A.5.5 7 0 C=1.5 C8=15,01=0 B 11 15 DIMENSIONS / -POSITION DOUBLE KVA00 series BODY PORTED KVA0 - C, C, C8, 01 B(), A() Port=C, C8, 01 (C: One-touch fitting for Ø) (C8: One-touch fitting for Ø8) (01: Rc(PT) 1/8) -M5X0.8P (Pilot Port) 8 59 1. -Ø. 1 58.5 1 5 R1 P 1 R -P.E. Port Rc(PT) 1/8 P(1) Port -Rc(PT) 1/1 R1(), R(5) Port BASE MOUNTED KVA0B - 0 -Ø.5 8 18 -M5X0.8P (Pilot Port) 9.5 5 59 8 (5.75) 71.5 9. 15.5 9 A(), B() Port 15 5-Rc(PT) 1/ (P, A, B, R1, R Port) 18 18 -P.E. Port 1.5 7

DIMENSIONS / -POSITION CLOSED CENTER, EXHAUST CENTER, PRESSURE CENTER KVA00 series BODY PORTED KVA0/0/50 - C, C, C8, 01 -Ø.8 8.5.5 1.5 B(), A() Port=C, C8, 01 (C: One-touch fitting for Ø) (C8: One-touch fitting for Ø8) (01: Rc(PT) 1/8) -M5X0.8P (Pilot Port) 8 7.5 0 11 C=1.5 15 C8=15, 01=0.5 7 1. -Ø. 1 71.5 1 BASE MOUNTED -P.E. Port Rc(PT) 1/8 P(1) Port -Rc(PT) 1/1 R1(), R(5) Port 5-PORT AIR OPERATED VALVE KVA0/0/50B - 0 -Ø. 8 18 15 -M5X0.8P (Pilot Port) 9.5 8 5 7 (5.8) 8.5.5 9 5-Rc(PT) 1/ (P, A, B, R1, R Port) 18 18 -P.E. Port 15.5 1.5 9 A(), B() Port 77

CONSTRUCTION / PARTS KVA00 series BODY PORTED BASE MOUNTED 5 1 5 1 5 1 7 -position single KVA10 5 1 5 1 5 1 -position single KVA10B 5 1 5 1 5 1 5 1 5 1 7 -position double 5 1 -position double KVA0 KVA0B 5 1 5 1 5 1 5 1 5 1 5 1 5 1 7 5 1 -position closed center Exhaust center Pressure center -position closed center Exhaust center KVA0 KVA0 KVA50 Pressure center KVA0B KVA0B KVA50B 5 1 5 1 5 1 5 1 5 1 5 1 5 1 5 1 5 1 5 1 5 1 5 1 No. Description Material No. Description Material BODY ADC-1 ADAPTER PLASTIC SPOOL Al NBR MANUAL BUTTON AI END COVER PLASTIC BASE ADC-1 PISTON PLASTIC 78

DIMENSIONS / -POSITION SINGLE KVA00 series BODY PORTED KVA10 - C, C8, C10, 0.9 80. 5.5 18 -Ø. B(), A() Port=C, C8, C10, 0 (C: One-touch fitting for Ø) (C8: One-touch fitting for Ø8) (C10: One-touch fitting for Ø10) (0: Rc(PT) 1/) M5X0.8P 8 (Pilot Port) 1 18 5 -Ø.5 1 5 1.5 11.5.5 0 1.5 5 A(), B() Port 18 5 C=1.5 C8=15 C10=19 5 -M5X0.8P (Pilot Port).9 (.8) 80. 5 9.5.5.5 17.8 -Ø. 7 1 1 BASE MOUNTED KVA10B - 0 P.E. Port -Rc(PT) 1/8 Rc(PT) 1/ R1(), R(5) Port P(1) Port 5-PORT AIR OPERATED VALVE P.E. Port 5-Rc(PT) /8 (P, A, B, R1, R Port) 1 1 79

DIMENSIONS / -POSITION DOUBLE KVA00 series BODY PORTED KVA10 - C, C8, C10, 0 89. 18.9 -Ø. B(), A() Port=C, C8, C10, 0 1 18 (C: One-touch fitting for Ø) (C8: One-touch fitting for Ø8) (C10: One-touch fitting for Ø10) (0: Rc(PT) 1/) -M5X0.8P (Pilot Port) 8 7.8 9.5.5 C=1.5 C8=15 C10=19.5 17.8 -Ø. 7 1 1 -P.E. Port -Rc(PT) 1/8 R1(), R(5) Port Rc(PT) 1/ P(1) Port BASE MOUNTED KVA0B - 0 -Ø.5 5 1 5 -M5X0.8P (Pilot Port).9 7.8 89. (.8).5 1.5 11.5 0 1.5 5 A(), B() Port 18 5 5 5-Rc(PT) /8 (P, A, B, R1, R Port) 1 1 -P.E. Port 80

DIMENSIONS / -POSITION CLOSED CENTER, EXHAUST CENTER, PRESSURE CENTER KVA00 series BODY PORTED KVA0/0/50 - C, C8, C10, 0.9 10. 18 -Ø. B(), A() Port=C, C8, C10, 0 1 18 (C: One-touch fitting for Ø) (C8: One-touch fitting for Ø8) (C10: One-touch fitting for Ø10) (0: Rc(PT) 1/) -M5X0.8P (Pilot Port) 8 8.8 9.5.5.5 C=1.5 C8=15 C10=19 17.8 -Ø. 1 8 1 BASE MOUNTED -P.E. Port -Rc(PT) 1/8 R1(), R(5) Port Rc(PT) 1/ P(1) Port 5-PORT AIR OPERATED VALVE KVA0/0/50B - 0 5 -Ø.5 1 5 -M5X0.8P (Pilot Port).9 8.8 (.8) 10..5 1.5 11.5 0 1.5 5 A(), B() Port 18 5 5 5-Rc(PT) /8 1 1 (P, A, B, R1, R Port) -P.E. Port 81

KVA190 90 90 -port Air Pilot Valve Body Ported HOW TO ORDER KVA 1 9 0 - C SERIES 1 KV100 (width: 10 mm) KV00 (width: 15 mm) KV00 (width: 18 mm) CONFIGURATION 8 N.O. (Normally Open) Body Ported PORT SIZE - (A) Port size KV190 KV90 KV90 C One-touch fitting for Ø C One-touch fitting for Ø C8 One-touch fitting for Ø8 M5 M5 thread 01 Rc(PT) 1/8 0 Rc(PT) 1/ 1 N.C. (Normally Closed) 9 1 SPECIFICATIONS Series KVA190, KVA180 KVA90, KVA80 KVA90, KVA80 Fluid Air or Inert Gases Pressure range 0.15~0.7 MPa (1.5~7.1kgt/cm ) Ambient and fluid temp. Note 1) Max. 50 C Pilot pressure range (0.7 Pressure + 0.1)~0.7 MPa Effective area (Cv).0 mm (0.)(0 1 10.5 mm (0.58)(0 1 1.0 mm (0.9) Manual operation Non Lock Lubrication Not required Weight(g) 15..1 5.1 PILOT PRESSURE OF AIR OPERATED VALVE Pilot Pressure (kgf/cm ) 5 Range of Pilot Pressure 1 5 Supply Pressure (kgf/cm ) Note 1) Use dry air to prevent condensation when operating at low temperature under 5 C. 8

CONSTRUCTION / PARTS -port Air Pilot Valve 5 1 5 1 KVA180 (N.O.) 1 KVA190 (N.C.) 1 1 1 5 1 5 1 KVA80 (N.O.) 1 KVA90 (N.C.) 1 1 1 5 1 5 1 -PORT AIR PILOT VALVE KVA80 (N.O.) 1 KVA90 (N.C.) 1 1 1 No. Description Material No. Description Material BODY ADC-1 PISTON PLASTIC SPOOL Al NBR ADAPTER PLASTIC END COVER PLASTIC MANUAL BUTTON Al 8

DIMENSIONS / N.O. (NORMALLY OPEN), N.C. (NORMALLY CLOSED) -port Air Pilot Valve BODY PORTED KVA190 - C, C, M5 -Ø. 9.5 15.8 17. C=10.5 C=1.5 M5=1.0 8. 0.85 10 11.7 1. 7. A() Port=C, C, M5 (C: One-touch fitting for Ø) (C: One-touch fitting for Ø) (M5: M5 thread) -Ø. 15..5 10.8 10 0.5 P.E. Port -M5X0.8P P(1), R() Port 8

DIMENSIONS / N.O. (NORMALLY OPEN), N.C. (NORMALLY CLOSED) -port Air Pilot Valve BODY PORTED KVA90 - C, C, C8, 01 5 7.8 -Ø.8.7.5 0 7 C=1.5 C8=15, 01=0 11 15 0 11.8 A() Port=C, C8, 01 (C: One-touch fitting for Ø) (C8: One-touch fitting for Ø8) (01: Rc(PT) 1/8) -Ø. 1.5. 7.5 1 1. -PORT AIR PILOT VALVE P.E. Port Rc(PT) 1/1 R() Port Rc(PT) 1/8 P(1) Port 85

DIMENSIONS / N.O. (NORMALLY OPEN), N.C. (NORMALLY CLOSED) -port Air Pilot Valve BODY PORTED KVA90 - C, C8, C10, 0 7 59. 9 -Ø..5.5 C=1.5 C8=15 C10=19 1 18 8. A() Port=C, C8, C10, 0 (C: One-touch fitting for Ø) (C8: One-touch fitting for Ø8) (C10: One-touch fitting for Ø10) (0: Rc(PT) 1/) -Ø. 7 10. 58.8 P.E. Port Rc(PT) 1/8 R() Port Rc(PT) 1/ P(1) Port 8

Manifold Assembly Order Form (Body Ported) HOW TO ORDER MKV 1 0 0-05 - D ORDER NO. : DATE : Company Name Quantity Delivery Date set(s) SERIES 1 KV100 series KV00 series KV00 series HOW TO ORDER VALVE STATIONS FIXING 0 stations 0 0 stations KV 1 1 0 - E - C - Standard type D DIN Rail mounting Order Example (MKV100-05) MKV100-05-D (1 set) : Body ported manifold - 5 stations KV110-E-C ( sets) : Valve No. (-position single) KV10-E-C (1 set) : Valve No. (-position double) KV10-E-C (1 set) : -position closed center BP- KV100 (1 set) : Blank plate KV10-E-C SERIES CONFIGURATION COIL VOLTAGE KV10-E-C KV110-E-C BP-KV100 1 KV100 series (width: 10 mm) KV00 series (width: 15 mm) KV00 series (width: 18 mm) 1 -position single -position double -position closed center -position exhaust center 5 -position pressure center 1 AC 110V AC 0V DC 1V DC V DC V 9 Others LEFT RIGHT,,, 1 Stations MKV100-05 ELECTRICAL ENTRY PORT SIZE - (B), (A) P P-type Plug Connector (with 00 mm lead wire) Port size KV100 KV00 KV00 E E-type Plug Connector (with 00 mm lead wire) C One-touch fitting for Ø C One-touch fitting for Ø L Lead Wire (00 mm lead wire) C8 One-touch fitting for Ø8 PN P-type Plug Connector (no connector) M5 M5 thread EN E-type Plug Connector (no connector) 01 Rc(PT) 1/8 LL Lead Wire (00 mm lead wire) 0 Rc(PT) 1/ 5 1 Stations Model KV110-E-C KV10-E-C KV10-E-C BP-KV100 Note: MKV100-05-D ASSEMBLY ORDER FORM (BODY PORTED) Item Stations 0 19 18 17 17 15 1 1 1 11 10 9 8 7 5 1 5 1 -position single -position 5double 1 5 1 5 1 5 1 5 1 -position closed center 5 1 5 1 5 1 -position exhaust 5 1 center 5 1 5 1 5 1 -position pressure 5 1 center 5 1 5 1 5 1 5 1 5 1 Blank plate 5 1 5 1 5 1 5 1 5 1 5 1 LEFT Check the mark if required. RIGHT Blank plug Note: Copy this page. 87

Manifold Assembly Order Form (Base Mounted) HOW TO ORDER MKV 1 0 0 B - 05 C - D ORDER NO. : DATE : Company Name Quantity Delivery Date set(s) SERIES 1 KV100B series KV00B series KV00B series PORT SIZE - (B), (A) HOW TO ORDER VALVE SERIES 1 KV100B series (width: 10 mm) KV00B series (width: 15 mm) KV00B series (width: 18 mm) COIL VOLTAGE 1 AC 110V AC 0V DC 1V DC V DC V 9 Others STATIONS FIXING 0 stations 0 0 stations KV 1 1 0 B - E CONFIGURATION FUNCTION 1 -position single -position double -position closed center -position exhaust center 5 -position pressure center ELECTRICAL ENTRY P E L PN EN LL - Standard type X External pilot P-type Plug Connector (with 00 mm lead wire) E-type Plug Connector (with 00 mm lead wire) Lead Wire (00 mm lead wire) P-type Plug Connector (no connector) E-type Plug Connector (no connector) Lead Wire (00 mm lead wire) - Standard D DIN Rail mounting Port size MKV100B MKV00B MKV00B Port size MKV100B MKV00B MKV00B C One-touch fitting for Ø M5 M5 thread C One-touch fitting for Ø 01 Rc(PT) 1/8 C8 One-touch fitting for Ø8 0 Rc(PT) 1/ Order Example (MKV100B-05) MKV100B-05C-D (1 set) : Base mounted manifold - 5 stations KV110B-E ( sets) : Valve No. (-position single) KV10B-E (1 set) : Valve No. (-position double) KV10B-E (1 set) : -position closed center BP-KV100 (1 set) : Blank plate KV10B-E KV110B-E KV10B-E BP-KV100 MKV100-05-C LEFT RIGHT,,, 1 Stations 5 1 Stations Model KV110B-E KV10B-E KV10B-E BP-KV100 Note: MKV100B-05C-D ASSEMBLY ORDER FORM (BASE MOUNTED) Item Stations 0 19 18 17 17 15 1 1 1 11 10 9 8 7 5 1 5 1 -position single -position 5double 1 5 1 -position closed center 5 1 5 1 5 1 -position exhaust 5 1 center 5 1 5 1 5 1 5 1 -position pressure center 5 1 5 1 5 1 5 1 5 1 Blank plate 5 1 5 1 5 1 5 1 5 1 5 1 5 1 5 1 5 1 LEFT Check the mark if required. RIGHT Blank plug Note: 88 Copy this page.

Manifold Assembly Order Form HOW TO ORDER (Body Ported / D-SUB Connector) MKV 1 0 0-05 - DS - D ORDER NO. : DATE : Company Name Quantity Delivery Date set(s) SERIES 1 KV100 series KV00 series KV00 series HOW TO ORDER VALVE SERIES 1 KV100 series (width: 10 mm) KV00 series (width: 15 mm) KV00 series (width: 18 mm) CONFIGURATION COIL VOLTAGE ELECTRICAL ENTRY PORT SIZE - (B), (A) P E L PN EN LL P-type Plug Connector (with 00 mm lead wire) E-type Plug Connector (with 00 mm lead wire) Lead Wire (00 mm lead wire) P-type Plug Connector (no connector) E-type Plug Connector (no connector) Lead Wire (00 mm lead wire) STATIONS ELECTRICAL ENTRY 05 5 stations 1 1 stations KV 1 1 0 - E - C 1 -position single -position double -position closed center -position exhaust center 5 -position pressure center C C C8 M5 1 AC 110V AC 0V DC 1V DC V DC V 9 Others Port size KV100 KV00 KV00 One-touch fitting for Ø One-touch fitting for Ø One-touch fitting for Ø8 M5 thread 01 Rc(PT) 1/8 0 Rc(PT) 1/ - Connector DS Multi-connector (D-SUB connector) FIXING - Standard D DIN Rail mounting Order Example (MKV100-05) MKV100-05-DS-D (1 set) : Body ported manifold - 5 stations KV110-E-C ( sets) : Valve No. (-position single) KV10-E-C (1 set) : Valve No. (-position double) KV10-E-C (1 set) : -position closed center BP-KV100 (1 set) : Blank plate KV10-E-C KV110-E-C KV10-E-C BP-KV100 MKV100-05-DS LEFT RIGHT,,, 1 Stations 5 1 Stations Model KV110-E-C KV10-E-C KV10-E-C BP-KV100 Note: MKV100-05-DS-D ASSEMBLY ORDER FORM (BODY PORTED) Item Stations 0 19 18 17 17 15 1 1 1 11 10 9 8 7 5 1 5 1 -position single 5 1 5 1 5 1 -position 5double 1 5 1 5 1 5 1 -position closed center 5 1 5 1 5 1 -position exhaust center 5 1 5 1 5 1 -position pressure center 5 1 5 1 5 1 Blank plate LEFT Check the mark if required. RIGHT Blank plug Note: Copy this page. 89

1 Manifold Assembly Order Form -PORT SOLENOID VALVE LEFT Check the mark if required. Item Stations 0 19 18 17 17 15 1 1 1 11 10 9 8 7 5 1 N.O. (Normally Open) RIGHT N.C. (Normally Closed) 1 Note: 5-PORT AIR OPERATED VALVE LEFT Check the mark if required. Stations Item 0 19 18 17 17 15 1 1 1 11 10 9 8 7 5 1 -position single RIGHT 5 1 -position double 5 1 -position closed center 5 1 -position exhaust center 5 1 -position pressure center 5 1 Blank plate Blank plug Note: -PORT AIR OPERATED VALVE LEFT Check the mark if required. Item Stations 0 19 18 17 17 15 1 1 1 11 10 9 8 7 5 1 N.O. (Normally Open) RIGHT 1 N.C. (Normally Closed) 1 Note: Copy this page. 91

V90 series, -port Solenoid Valve / Direct Poppet Type Compact size with large flow capacity Low power consumption Exceedingly long life Filter inserted (P, A port) Wiring and distribution adaptively designed SV series, 5-port Solenoid Valve / Pilot Type Wide range of port sizes and body sizes (M5~Rc(PT)/) Superior flow features and high reliability Low power consumption and simple maintenance Various kinds of wire distributing type Air operated valves The contents of this catalogue are subject to be modified without notice for further product improvement. 01. 0. SHINYEONG MECHATRONICS CO., LTD. All rights reserved. MC / SC / FC series B0, 0, 0 series Air Cylinder (Mini, Compact & Standard) The best use of space Easy to attach auto-switches Lowered maintenance cost Enhanced Kinetic Energy Improved mounting accuracy Air Clean Unit Newly-designed space-saving air clean unit Rovolving one-touch type drain cock Easy to assemble bracket spacer Slim and square-shaped pressure gauge (option) Convenient adjustment of oil dripping quantities with scale HEADQUARTERS Na-10, Sihwa Industrial Complex, Jeongwang-dong, Siheung-si, Gyeonggi-do, Korea TEL +8-1-99-5500 FAX +8-1-99-5505 http://www.sym1.com SALES DIVISION 101-505, SK Ventium, Dangjeong-dong, Gunpo-si, Gyeonggi-do, Korea TEL +8-1--0001 FAX +8-1--0099