Group 2 Thermo-plastic Hoses Teflon Hoses Water Jetting Hoses

Group Thermo-plastic Hoses Teflon Hoses Water Jetting Hoses

IND Page Contents 3-6 Selection Tables for Hoses and Fittings 7 Micro Hoses, 00N, Mini Control System 8 Teflon Hoses (PTFE), 030T, 033T 9 High Pressure, Type 50N, 57, Low volume Expansion 10 High Pressure, Type 0N, 040N, Light weight 11 High Pressure, Type 44N, 45N, 370N/H, Hydraulic, Gases 1 High Pressure, 714, Type 715 Spray Paint, Hydraulic 13 Ultra high Pressure Type 380N, 380M, Hydraulic, Methanol 14 Ultra high Pressure, Type 388N, X80N, 390N (V91) Hydraulic 15 Ultra high Pressure, Type 448N (V91) Umbilical Hose, 440D/N, Hydraulic 16 Ultra high Pressure, 640D/N, Hydraulic 17 Black Eagle Family + Colorgard TM 18 Water Jetting, Type 40D, 388N Blueline 19 Water Jetting, Type 440D/N, 0N Blueline 0 Water Jetting, Type 640D/N, 740D 1 Water Jetting, Type 840D -6 Chemical table Symbol Key 388N-04V1W 6.3 1/4-04 13.3 180 180 300 46400 80 0.30 BS Part No Inside Diameter Out. Dia. Working Pressure Burst Pressure B. adius Weight -

SELECTION OF HOSES Hose Part Number Build Design Variation V30 Hose Type (reinforcement) 440 Core Tube and I.D. N-16 440N-16V30 440 1.einforcement. reinforcement II (if rein-forcement 0). reinforcement II (if rein-forcement =0) 3. einforcement III 0 = No spiralizing hhh 0 = No braiding 0 = No braiding 1 = Two open spiralized layers 1 = Synthetic fiber (not aramid) 1 = One braid of non-aramid fiber 1 = One braid of non-aramid fiber = Two closed spiralized layers = Aramid fiber = One braid of aramid fiber = One braid of aramid fiber 3 = Two closed spiralized layers two open spiralized layers 3 = Stainless steel wire 3 = One braid of stainless steel wire 3 = One braid of stainless steel wire 4 = Four closed spiralized layers 4 = Steel wire 4 = One braid of steel wire 4 = One braid of steel wire 5 = Four closed spiralized layers (increased pressure) 5 = Iron wire 5 = One braid of iron wire 5 = One braid of iron wire 6 = Six closed spiralized layers 6 = Cord strand 6 = One braid of iron wire, zinc-plated 7 = Six closed spiralized layers (increased pressure) 7 = Steel wire and open spiralized synthetic yarn 8 = Eight closed spiralized layers 8 = Steel wire and open spiralized cord strand 9 = Eight closed spiralized layers (increased pressure) 9 = Other construction 6 = One braid of iron wire, zinc-plated 7 = (open) 8 = Different pressure reinforcement N-16 N-16 V30 V30 4. Core Material 5. Hose Size (I.D.) 6. Cover Material 7. Cover Color D = POM (Delrin) 0 = 1/8" (3.mm) 0 = Polyurethane (PU) 0 = Black E = Ethylene tetrafluoroethylene (ETFE) 05 = 5/3" (4.0mm) 1 = Polyurethane (PU) - seawater-resistant Ethylene chlorotrifluoroeth-ylene (ECTFE) 03 = 3/16" (4.8mm) = PEE = Blue F = Fluorinated ethylene propyl-ene (FEP) 04 = 1/4" (6.4mm) 3 = Polyamide (PA) - Nylon (6, 11, or 1) H = Thermoplastic Elastomer-Ether-Ester Hytrel * 05 = 5/16" (7.9mm) 3 = Polyamide (PA) - Nylon (6, 11, or 1) - 3 1 = Black (metha-nolwashed hose types) 3 = Green 4 = ed M = Mixture/co-extruded 06 = 3/8" (6.4mm) 4 = Polyethylene (PE) 5 = Orange N = Polyamide (Nylon) 08 = 1/" (1.7mm) 8 = Extra thick 6 = Yellow P = Polyethylene (PE) 1 = 3/4" (19.0mm) 7 = Gray S = Special material 16 = 1" (5.4mm) 8 = Gold T = Polytetrafluoroethylene (PTFE) U = Thermoplastic polyure-thanes (TPU) 0 = 1-1/4" (31.8mm) 4 = 1-1/" (38.1mm) V = Polyvinylidene Fluoride (PVDF) 3 = " (50.8mm) 48 = 3" (76.0mm)

SELECTION OF HOSES Selection Table for Hoses Hose Dimension inch 5/64 1/8 5/3 3/16 1/4 5/16 3/8 1/ 5/8 3/4 1 1¼ 1½ 3 mm.0 3. 4.0 4.8 6.4 7.9 9.5 1.7 15.9 19.0 4.4 31.8 38.1 50.8 75.0 dash -01-0 -05-03 -04-05 -06-08 -10-1 -16-0 -4-3 -48 DN 3 4 5 6 8 10 1 16 0 5 3 40 50 75 Micro Hoses Working Pressure Bar Fittings Series 00N 475 400 Teflon Hoses PTFE/FEP 030T 75 40 00 175 150 15 100 80 B 033T 75 50 5 00 175 150 15 High pressure Hoses 50N 345 345 310 75 40 / 57 345 345 345 345 345 345 //H 0N - V91 5K 345 345 345 040N 350 340 310 50 40 185 140 15 100 / 44N 535 0 75 / 45N 450 400 375 350 330 300 75 370N/H 465 440 40 350 X/9X 390NV91 445 415 350 80 9X Ultra high pressure Hoses 0N - V91 10K 690 690 690 /3X/ 380N 700 635 7 7 / 380M 690 600 / 388N 800 X80N 700 700 450 / 390NV91-10K 71 9X 440D 00 1800 1640 1500 1400 1300 1000 90 440N 1400 1300 1000 900 440NV91 865 690 690 690 448NV91 1035 1035 865 / * 640D/640N 800 500 100 1800 1400 690 690 Black Eagle 40N - V80 345 TX 440N/48N - V80 690 345 690 /BL/SX 0N - V80 690 BL/SX 640N/48N - V80 1035 1035 1035 CX/SX 448M - V88 345 BL/SX 0M - V88 690 BL 640M - V88 690 SX Paint Spray Hoses 714 345 310 50 40 190 145 130 100 715 450 395 345 75 10 175 135 X Water Jetting Hoses 40D 1100 100 1000 1000 900 TX/AX 388N 180 1100 BS 440D/440N 00 1800 1640 1500 1400 1300 1000 900 0N 1600 1400 100 BL 640D/640N 800 500 500 100 1800 1400 100 HX/ 740D 3000 800 500 000 HX 840D 4000 3000 500 WX - 4 * Ask us about fittings

SELECTION OF FITTINGS Selection Table for Fittings 9X NPTF Male 60 Cone 01 X X X X X X X X X NPTF Female-rigid 0 X JIC Male-37 Cone 03 X X X X UNF Male/O-ring 05 X X X JIC-37 Cone 06 X X X X X X X X X Metric Swivel Strong Series 90 Elbow O-ring 1C X X X JIC 37 Cone 45 Elbow 37 X X X JIC 37 Cone 90 Elbow 39 X X X X X BSP Male-60 Cone 3B X BSP Swivel 60 Cone 9 X X X X X X X X UNF Swivel 59 Cone AY X BSP Swivel 45 Elbow B1 X X X X X BSP Swivel 90 Elbow B X X X X X Metric Swivel Light Series Cone C3 X X X X X X X Metric Swivel Light Series Cone 45 Elbow C4 X X X X Metric Swivel Light Series Cone 90 Elbow C5 X X X X Metric Swivel Strong Series C6 X X X X Metric Swivel Strong Series O-ring C9 X X X X X X Metric Swivel Light Series O-ring CA X X X X X Metric Swivel Light Series 45 Elbow O-ring CE X X X X Metric Swivel Light Series 90 Elbow O-ring CF X X X X Metric Male 4 Cone Light Series D0 X X X X X X Metric Male 4 Cone Strong Series D X X X X X BSP Male D9 X X X X X X X M16X Swivel (Knurled nut) 8 X BSP Swivel 60 Cone UO X X X BSP Male- For USIT ing Y9 AE Fitting High Pressure 59 Cone UNF-LH YA X Metric Swivel Nut Y X AE Fitting Medium Pressure 59 Cone UNF-LH Y X AE Fitting High Pressure 59 Cone UNF-LH Y4 AE Fitting High Pressure 59`Metric cone YM X 01 NPTF Male - 60 Cone 0 NPTF Female - rigid 03 JIC Male - 37 Cone 05 UNF Male / O-ing BL BS X X X X 06 JIC - 37 Cone 37 JIC - 37 Cone 39 JIC - 37 Cone 3B BSP Male - 60 Cone UNF Swivel Nut 9X AX X 45 Elbow UNF Swivel Nut X 90 Elbow UNF Swivel Nut X X 9 Sealing Head (60 ) BSP Swivel Nut BL 9X BS KX X AY 59 Sealing Cone UNF Swivel Nut 69 HX KX X 113 B1 Sealing Head (60 ) BSP Swivel Nut 45 Elbow X B Sealing Head (60 ) BSP Swivel Nut 90 Elbow X C3 Sealing Head Light Series Metric Swivel Nut X C4 Sealing Head 45 Elbow Light Series Metric Swivel Nut X C5 Sealing Head 90 Elbow Light Series Metric Swivel Nut X C6 Sealing Head Heavy Series Metric Swivel Nut X - 5

SELECTION OF FITTINGS Selection Table for Fittings X AX TX KX BS BL HX WX NPTF Male 60 Cone 01 X X X X X X X NPTF Female-rigid 0 JIC Male-37 Cone 03 X X X UNF Male/O-ring 05 JIC-37 Cone 06 X X X X X X Metric Swivel Strong Series 90 Elbow O-ring 1C X X X JIC 37 Cone 45 Elbow 37 X X JIC 37 Cone 90 Elbow 39 X X BSP Male-60 Cone 3B X X X X BSP Swivel 60 Cone 9 X X X X X X X X X UNF Swivel 59 Cone AY X X X BSP Swivel 45 Elbow B1 X X X BSP Swivel 90 Elbow B X X X Metric Swivel Light Series Cone C3 X X X X Metric Swivel Light Series Cone 45 Elbow C4 Metric Swivel Light Series Cone 90 Elbow C5 Metric Swivel Strong Series C6 X X Metric Swivel Strong Series O-ring C9 X X X X X X X X X X Metric Swivel Light Series O-ring CA X X Metric Swivel Light Series 45 Elbow O-ring CE X Metric Swivel Light Series 90 Elbow O-ring CF X Metric Male 4 Cone Light Series D0 X X Metric Male 4 Cone Strong Series D X X X BSP Male D9 X X X X M16X Swivel (Knurled nut) 8 BSP Swivel 60 Cone UO X X X X X BSP Male- For USIT ing Y9 X AE Fitting High Pressure 59 Cone UNF-LH YA X Metric Swivel Nut Y AE Fitting Medium Pressure 59 Cone UNF-LH Y AE Fitting High Pressure 59 Cone UNF-LH Y4 X X AE Fitting High Pressure 59`Metric cone YM X X X C9 4 Sealing Cone / O-ing Heavy Series Metric Swivel Nut ISO 11-9X BL AX BS X HX CA 4 Sealing Cone / O-ing Light Series Metric Swivel Nut ISO 11- X CE 4 Sealing Cone / O-ing 45 Elbow Light Series Metric Swivel Nut ISO 11- X CF 4 Sealing Cone / O-ing 90 Elbow Light Series Metric Swivel Nut ISO 11- X D0 Light Series ISO 11- Metric Male 4 Cone X D Heavy Series ISO 11- Metric Male 4 Cone X D9 DIN 385 Shape A BSP Male X 8 Quick Connect Fitting Metric Swivel Nut Knurled X U0 BSP Swivel Nut Sealing Head (60 ) X Y9 BSP Male - for USIT ing X YA High Pressure Connector 59 Cone UNF - Left Hand Thread X Y Quick Connect Fitting Metric Swivel Nut X Y Medium Pressure Connector 59 Cone UNF - Left Hand Thread X Y4 High Pressure Connector 59 Cone UNF - Left Hand Thread X HX WX YM High Pressure Connector 59 Metric Cone Metric - Left Hand Thread X HX WX - 6

THEMOPLASTIC HOSES MICO HOSES Type 00N Mini Control System High pressure hose for use with petroleum and synthetic hydraulic oils and gases. Special hose for Mini Control pressure measurement equipment (minimess). Supplied with fittings as specified on the next page. Max length change is +% / -4% at working pressure. * Safety factor reduced for diagnostic applications. CONSTUCTION: Covering: Black Polyamide einforcement: 1 layer braided synthetic fiber Polyamide TEMPEATUE ANGE: 40 o C to +100 o C for synthetic and oil-based hydraulic oils 00N-0130.0 5/64-01 4.9 475 6890 1900 70 0 0.016 00N-0V30 3. 1/8-0 6.0 400 00 1600 300 30 0.03 Mini control system HOSE COUPLINGS FO USE WITH HOSE type 00N M16X SCEW LOCK COUPLING Part No A mm d mm d1 mm P.max bar 801.10.16 19 M16x 640 COUPLING WITH PIPE SOCKET 801.3.006 4 6 M14x1,5 640 801.3.008 4 8 M16x1,5 640 Part No of the couplings are complete with pressure sleeve, and includes sleeve with dust plug M16x screw lock couplings. PESSUE GAUGE COUPLING 801.50.04 5 1/4 BSP 640 801.50.08 5 1/ BSP 640 OTHE SIZES, THEAD TYPES AND MATEIALS AVAILLE ON EQUEST - 7

THEMOPLASTIC HOSES PTFE TEFLON HOSES Type 030T PTFE Teflon Hose There are currently no known solvents for PTFE. Can be used for steam, acids, alkalis, articles of food, oils and corroding oils and corroding substances. PTFE is highly resistant to natural degradation and aging and does not absorb water. The exceptional low friction resistance minimizes loss of pressure in the hoses. Type 030T is well suited for spray painting. CONSTUCTION: Covering: Stainless steel wire braid (reinforcement) einforcement: 1 layer stainless steel wire braiding Polytetrafluoroethylene PTFE) TEMPEATUE ANGE: 50 o C to +150 o C (+30 o C up to 0 bar) 030T-03V70 4.8 3/16-03 7.8 75 3990 1100 15950 50 0.09 B 030T-04V70 6.3 1/4-04 9.5 40 3480 960 1390 75 0.13 B 030T-05V70 7.9 5/16-05 11.5 00 900 800 11600 100 0.17 B 030T-06V70 9.5 3/8-06 13.3 175 0 700 10150 10 0.19 B 030T-08V70 1.7 1/ -08 16.7 150 180 600 8700 135 0.9 B 030T-10V70 15.9 5/8-10 0.0 15 1810 500 750 160 0.34 B 030T-1V70 19.0 3/4-1 3.5 100 1450 400 00 00 0.41 B 030T-16V70 5.4 1-16 9.0 80 1160 30 4640 50 0. B Type 033T PTFE Teflon Hose There are currently no known solvents for PTFE. Can be used for steam, acids, alkalis, articles of food, oils and corroding oils and corroding substances. PTFE is highly resistant to natural degradation and aging and does not absorb water. The exceptional low friction resistance minimizes loss of pressure in the hoses. Type 030T is well suited for spray painting. CONSTUCTION: Covering: Stainless steel wire braid (reinforcement) einforcement: layers stainless steel wire braiding Polytetrafluoroethylene PTFE) TEMPEATUE ANGE: 50 o C to +150 o C (+30 o C up to 0 bar) 033T-04V70 6.3 1/4-04 11.0 75 3990 1100 15950 75 0.3 033T-05V70 7.9 5/16-05 13. 50 3630 1000 14500 100 0.6 033T-06V70 9.5 3/8-06 15.0 5 360 900 13050 10 0.34 033T-08V70 1.7 1/ -08 18.8 00 900 800 11600 135 0.47 033T-10V70 15.9 5/8-10 1.5 175 0 700 10150 160 0.53 033T-1V70 19.0 3/4-1 5.5 150 180 600 8700 00 0.69 033T-16V70 5.4 1-16 31.0 15 1810 500 70 50 0.81-8

THEMOPLASTIC HOSES HIGH PESSUE Type 50N Standard Specifications Exceed SAE 100 8 High pressure hose for use with oil-based and synthetic hydraulic oils, as well as gases. Low volumetric expansion and small outer diameter due to aramid fiber reinforcement. Also available as dual- or multi-hose. Max length change is +/- % at working pressure. Given pressures are indicative. Maximum working pressure is dependent on temperature and medium. CONSTUCTION: Covering: einforcement: Black pin-pricked Polyurethane 1 layer braided synthetic aramid fiber Polyamide TEMPEATUE ANGE: 40 o C to +100 o C for synthetic and oil-based hydraulic oils Note: For Non-conductive use N. 50N-03 4.8 3/16-03 10.9 345 5000 1380 0000 38 0.07 / 50N-04 6.3 1/4-04 13.0 345 5000 1380 0000 0.10 / 50N-05 7.9 5/16-05 14.5 310 4500 140 18000 64 0.1 / 50N-06 9.5 3/8-06 16.5 75 4000 1100 16000 64 0.1 / 50N-08 1.7 1/ -08 0.6 40 3500 960 14000 10 0.0 / Type 57 High Pressure Low Volumetric Expansion High pressure hose for use with oil-based and synthetic hydraulic oils. Especially designed for applications where low volumetric expansion and stable pressure is required. Max length change is +/- % at working pressure. Given pressures are indicative. Maximum working pressure is dependent on temperature and medium. CONSTUCTION: Covering: einforcement: Black special Polyurethane 1 or layers braided synthetic aramid fiber Polyamide TEMPEATUE ANGE: 40 o C to +100 o C for synthetic and oil-based hydraulic oils max. 70 o C for water or methanolbased fluids 57-03 4.8 3/16-03 10.8 345 5000 1380 0000 38 0.07 / 57-04 6.3 1/4-04 1.8 345 5000 1380 0000 0.10 / 57-06 9.5 3/8-06 16.3 345 5000 1380 0000 76 0.13 / 57-08 1.7 1/ -08 0.6 345 5000 1380 0000 10 0.0 / 57-1 19.0 3/4-1 9. 345 5000 1380 0000 03 0.53 H 57-16 5.9 1-16 40. 345 5000 1380 0000 0.70 H - 9

THEMOPLASTIC HOSES HIGH PESSUE Type 0N Light weight control devices Flexible and lightweight with excellent pressure capabilities.. Smooth bore for improved flow rate and low pressure drop. ISO 1368-5 Specification for Subsea Production Control Umbilicals.. Used for long-length hose and hose umbilicals requiring lightweight construction, offshore pressure control devices, high pressure tools, hydraulics, pneumatics and lubricating oils. CONSTUCTION: Covering: einforcement: Black Polyamid layers braided synthetic fibers Polyamide TEMPEATUE ANGE: 40 o C to +100 o C for synthetic- and oil-based hydraulic oils Part No mm inch dash mm bar psi bar psi mm kg/m 0N-04V91-5K 6,4 1/4-6 1,7 345 5 000 1380 0 000 0,1 * 0N-04V91-10K 6,4 1/4-6 13,8 690 10 000 760 40 000 100 0,14 0N-06V91-5K 9,5 3/8-10 16,1 345 5 000 1380 0 000 76 0,15 * 0N-06V91-10K 9,5 3/8-10 19,0 690 10 000 760 40 000 100 0,4 3X 0N-08V91-5K 1,7 1/ -1 0,8 345 5 000 1380 0 000 10 0,17 * 0N-08V91-10K 1,7 1/ -1 3, 690 10 000 760 40 000 100 0,34 Fitting Series Type 040N Multi-use Hose DIN 0 0 Part 1 High pressure hose for hydraulic systems with petroleum, synthetic or water based hydraulic oils. Also ideal for grease, gases and paint spraying. Max length change is +/- % at working pressure. Given pressures are indicative. Maximum working pressure is dependent on temperature and medium. Available in other colors CONSTUCTION: Covering: einforcement: Black Polyurethane 1 layer steel wire braiding Polyamide TEMPEATUE ANGE: 40 o C to +100 o C for synthetic- and oil-based hydraulic oils 040N-0V00 3. 1/8-0 7.0 350 5075 1400 0300 30 0.07 040N-03V00 4.8 3/16-03 9.8 340 4930 1360 1970 30 0.11 / 040N-04V00 6.3 1/4-04 11.9 310 4495 140 17980 40 0.16 / 040N-05V00 7.9 5/16-05 14.0 50 365 1000 14500 50 0.1 / 040N-06V00 9.5 3/8-06 15.9 40 3480 960 1390 60 0.4 / 040N-08V00 1.7 1/ -08 19.3 185 680 740 10730 75 0.9 / 040N-10V00 16.0 5/8-10 3.5 140 030 0 810 110 0.39 040N-1V00 19.1 3/4-1 6.7 15 1810 500 750 170 0.50 040N-16V00 5.0 1-16 33.5 100 1450 400 00 30 0.60-10

THEMOPLASTIC HOSES HIGH PESSUE Type 44N/45N SAE 100 9/10 High pressure hydraulic systems for petroleum- and syntheticbased hydraulic oils, spray painting, gases and aggressive media. Ideal for hydraulic and rescue tools. 3/4 and 1 hoses are DNV type-approved. Given pressures are indicative. Maximum working pressure is dependent on temperature and medium. CONSTUCTION: Covering: Black Polyurethane (Polyurethane from 5/8 ) einforcement: layers steel wire spiral and 1 layer steel wire braiding Polyamide TEMPEATUE ANGE: 40 o C to +100 o C for oil-based hydraulic oils (to +15 o C for shorter periods) 44N-06V00 9.5 3/8-06 18.0 535 7760 150 31175 10 0.50 44N-08V10 1.7 1/ -08.7 0 7970 00 31900 150 0.80 44N-0V30 3.0 1.1/4-0 44.0 75 3990 1100 15950 400 1.83 45N-04V00 6.3 1/4-04 1.5 450 6530 1800 6100 70 0.5 45N-05V00 8.0 5/16-05 14.3 400 00 1600 300 100 0.3 45N-06V00 9.5 3/8-06 17.0 375 40 1500 1750 10 0.4 45N-08V00 1.7 1/ -08 0.7 350 5080 1400 0300 165 0.5 45N-10V30 15.9 5/8-10 4.5 330 4780 130 19140 00 0.7 45N-1V30 19.0 3/4-1 8.5 300 4350 100 17400 40 0.9 45N-16V30 5.4 1-16 34.0 75 3990 1100 15950 80 1.15 Type 370N/H Universal DIN 0 0 Part High pressure hydraulic systems for petroleum- and syntheticbased hydraulic oils and gases and aggressive media. Ideal for hydraulic and rescue tools. For CNG use, the hose is only sold pre-assembled with fittings including kink guards. Also available as dual- or multi-hose. Max length change is +/- % at working pressure. Given pressures are indicative. Maximum working pressure is dependent on temperature and medium. CONSTUCTION: Covering: einforcement: Internal H: Internal N: Black Polyurethane layers steel wire spiral and layers braided synthetic fiber Polyester Elastomer Polyamide TEMPEATUE ANGE: 40 o C to +100 o C for oil-based hydraulic oils (to +10 o C for shorter periods). V91 has PA11 inside. For paint spraying, use fittings series 370N-04V10 6.3 1/4-04 1.4 465 6740 1860 6970 70 0.19 X 370N-05V10 8. 5/16-05 14.3 440 6380 1760 0 100 0.5 X 370N-06V10 9.7 3/8-06 16.4 40 6090 1680 4360 10 0.33 9X 370N-08V10 1.8 1/ -08 19.6 350 5075 1400 0300 150 0.4 9X 370N-06V91 9.9 3/8-06 16.5 430 650 175 5000 10 0.33 X 370H-08V10 1.8 1/ -08 19.6 350 5075 1400 0300 150 0.4 9X - 11

THEMOPLASTIC HOSES HIGH PESSUE Type 714 Spray Paint Hose Type 714 is a special hose for high pressure spray paint designed to meet the market demands. The steel wire braiding makes the hose 100% electrically conductive. Inner tube specially designed for chlorinated solvents. The polyurethane covering provides excellent flexibility and durability. Also excellent for use as a hydraulic hose. CONSTUCTION: Covering: einforcement: Blue Polyurethane 1 layer steel wire braiding Polyamide TEMPEATUE ANGE: 40 o C to +100 o C for synthetic- and oil-based hydraulic oils Part No mm inch DN mm bar psi bar psi mm kg/m Fitting Series 714-03 4.7 3/16 DN 05 9.3 345 5000 1380 0000 30 0.10 714-04 6.5 1/4 DN 06 11.8 310 4500 140 18000 40 0.16 714-05 8.0 5/16 DN 08 13.6 50 3600 1000 14500 0.19 714-06 9.6 3/8 DN 10 15.5 40 3500 960 14000 63 0.5 714-08 1.7 1/ DN 13 18.6 190 750 760 11000 75 0.31 714-10 16.0 5/8 DN 16 3.5 145 100 0 8400 100 0.43 714-1 19.0 3/4 DN 0 7.0 130 1850 50 7500 150 0.50 714-16 5.5 1 DN 5 33.5 100 1450 400 00 30 0.6 Type 715 Spray Paint Hose Type 715 is a special hose for high pressure spray paint designed to meet the market demands. The steel wire braiding makes the hose 100% electrically conductive. Inner tube specially designed for chlorinated solvents. The polyurethane covering provides excellent flexibility and durability. Also excellent for use as a hydraulic hose. CONSTUCTION: Covering: einforcement: Blue Polyurethane layers steel wire braiding Polyamide TEMPEATUE ANGE: 40 o C to +100 o C for synthetic- and oil-based hydraulic oils 715-04 6.5 1/4 DN 06 13.6 450 6500 1790 6000 100 0.30 X 715-05 8.0 5/16 DN 08 15.4 395 5750 10 3000 110 0.35 X 715-06 9.6 3/8 DN 10 17.5 345 5000 1380 0000 17 0.4 X 715-08 1.7 1/ DN 13 1.4 75 4000 1100 16000 178 0. X 715-10 16.0 5/8 DN 16 5.4 10 3000 840 1000 03 0.69 X 715-1 19.0 3/4 DN 0 8.5 175 500 700 10000 41 0.89 X 715-16 5.5 1 DN 5 36.1 135 000 0 8000 305 1.1 X - 1

THEMOPLASTIC HOSES ULTA HIGH PESSUE - CHEMJEC Type 380N Exceed SAE 10 High pressure hydraulic systems for petroleum- and syntheticbased hydraulic oils. Ideal for hydraulic and rescue tools. Given pressures are indicative. Maximum working pressure is dependent on temperature and medium. CONSTUCTION: Covering: Black Polyurethane (other colors on request) einforcement: layers steel wire spiral and layers steel wire braid Polyamide. V91 has methanol-washed PA11 TEMPEATUE ANGE: 40 o C to +100 o C for oil-based hydraulic oils, V91 also for methanol-based fluids 380N-04V00 6.3 1/4-04 13.3 700 10150 800 40600 70 0.3 380N-04V91 6.4 1/4-04 13.5 690 10000 760 40000 70 0.7 / 380N-05V00 7.9 5/16-05 15.7 65 965 500 3650 90 0.41 380N-06V91 9.8 3/8-06 17.9 7 7500 070 30000 10 0.44 380N-08V91 9.8 1/ -08.9 7 7500 070 30000 150 0.68 Also available in twin design Type 380M Exceed ISO 1368-5 Withstands high pressure cycles with no signs of stress cracking. Proven to handle methanol. High collapse resistance (HC) and also providing longer service life. Extremely low permeability. High pressure, high temperature, low volumetric expansion hose. Long length subsea umbilical hose. Excellent chemical resistance. Available in long continuos length up to 3,000 m. CONSTUCTION: Covering: Black PA1 einforcement: High strength wire Coextruded core tube with fl uoropolymer inside TEMPEATUE ANGE: -40 C up to +100 C, short term 15 C 380M-04V38 6.4 1/4-04 13.4 690 10000 800 40000 30 0.7 380M-05V38 8.3 5/16-05 15.8 600 8700 400 34800 90 0.35 Also available in twin design - 13

THEMOPLASTIC HOSES ULTA HIGH PESSUE High pressure hydraulic systems for petroleum and synthetic based hydraulic oils. Ideal for hydraulic and rescue tools. Given pressures are indicative. Maximum working pressure is dependent on temperature and medium. CONSTUCTION: Covering: einforcement: Type 388N Exceed SAE 10 Black Polyurethane (other colors on request) layers steel wire spiral and layer steel wire braid Polyamide TEMPEATUE ANGE: 40 o C to +100 o C for oil-based hydraulic oils 388N-04V00 6.3 1/4-04 13.3 800 11600 300 46600 80 0.305 Type X80N High pressure hydraulic systems for petroleum- and syntheticbased hydraulic oils. Ideal for hydraulic and rescue tools. Given pressures are indicative. Maximum working pressure is dependent on temperature and medium. CONSTUCTION: Covering: Black Polyurethane einforcement: Steel wire and aramid combination Polyamide TEMPEATUE ANGE: 40 o C to +100 o C for oil-based hydraulic oils X80N-04V10 6.3 1/4-04 13.4 700 10150 800 40600 38 0.37 X80N-06V10 9.8 3/8-06 18.6 700 10150 800 40600 70 0.0 X80N-1V10 19.8 3/4-1 30.0 450 6 1800 6100 100 1.080 Type 390N (V91) High pressure hydraulic systems for petroleum- and syntheticbased hydraulic oils. Ideal for hydraulic and rescue tools. Given pressures are indicative. Maximum working pressure is dependent on temperature and medium. CONSTUCTION: Covering: Black Polyurethane einforcement: Steel wire and aramid combination Polyamide PA11 TEMPEATUE ANGE: 40 o C to +100 o C for oil-based hydraulic oils 390N-06V91 9.8 3/8-06 18.1 445 64 1780 00 10 0.41 9X 390N-08V91 1.9 1/ -08 1. 415 6015 1660 4070 150 0.57 9X 390N-1V91 19.4 3/4-1 8.8 350 5075 1400 0300 300 0.90 9X 390N-16V91 5. 1-16 35.0 80 4061 110 1600 80 1.17 9X 390N-06V91-10K 9.5 3/8-06 18.4 71 1030 1780 00 180 0.33 9X - 14

THEMOPLASTIC HOSES ULTA HIGH PESSUE Type 448N (V91) Umbilical hose Available in long lengths for use in subsea umbilicals. CONSTUCTION: Covering: einforcement: Black PA1 4 layers steel wire spiral Methanol washed PA11 TEMPEATUE ANGE: 40 o C to +100 o C +70 o C for water- or methanol-based fluids 448N-04V91 6.0 1/4-04 13.8 1035 15000 4140 60000 150 0.38 448N-06V91 10.0 3/8-06 0.3 1035 15000 4140 60000 190 0.74 * 448N-08V91 1.9 1/ -08.7 865 1500 3450 50000 00 0.94 Type 440D/440N Ultra high pressure Hose For use with petroleum or synthetic hydraulic fluids, gases and chemicals. Well suited for hydraulic prestress tools, test rigs and offshore oil applications. The hose is marked with manufacturer, type of hose, working pressure and production date. Also available as pin-prickled - add -P after Part No. CONSTUCTION: Covering: einforcement: 440D Blue Polyamide 440N Black Polyamide 4 layers steel wire spiral 440D Polyoxymethylene 440N Polyamide TEMPEATUE ANGE 40 o C to +70 o C Part No mm inch dash mm bar psi bar psi mm kg/m 440D-05V3 3.9 5/3-05 10.4 00 31900 00 79750 100 0.1 440D-03V3 4.7 3/16-03 11.5 1800 6090 4400 650 10 0.5 440D-04V3 6.3 1/4-04 1.5 1640 3770 4100 5940 1 0.33 440D-05V3 8.0 5/16-05 15.1 1500 1740 3750 350 175 0.44 440N-06V30 9.7 3/8-06 19.4 1400 090 3500 5070 190 0.70 440N-08V30 1.8 1/ -08.5 1300 18840 350 47100 00 0.94 440N-1V30 19.6 3/4-1 30.0 1000 14490 500 3630 50 1.39 440N-16V30 5.0 1-16 37.0 900 13040 50 3610 300 1.90 440N-06V91 9.8 3/8-06 19.5 865 1500 3450 50000 190 0.73 440N-08V91 10.9 1/ -08.6 690 10000 760 40000 00 0.94 440N-1V91 19.8 3/4-1 30. 690 10000 500 3650 50 1.46 440N-16V91 5. 1-16 37. 0 810 50 365 300.0 440N-16V91-10k 5. 1-16 37. 690 10000 50 365 300.0-15 Fitting Series

THEMOPLASTIC HOSES ULTA HIGH PESSUE Type 640D/640N Ultra high pressure Hose For use with petroleum or synthetic hydraulic fluids and chemicals. Well suited for hydraulic prestress tools, test rigs and offshore oil applications. The hose is marked with manufacturer, type of hose, working pressure and production date. CONSTUCTION: Covering: Blue Polyamide einforcement: 6 layers steel wire spiral 640D Polyoxymethylene 640N Polyamide TEMPEATUE ANGE: 40 o C to +70 o C 640D-05V3 4.0 5/3-05 1.0 800 40600 7000 101500 140 0.9 640D-03V3 4.8 3/16-03 13.0 500 3630 650 900 175 0.41 640D-05V3 7.9 5/16-05 16.9 100 30430 0 76090 5 0.68 640N-08V3 1.7 1/ -08 4.5 1800 6090 4500 650 90 1.36 640N-1V3 19.0 3/4-1 33.0 1400 090 3500 5070 350.10 640N-1V91 19.8 3/4-1 33. 865 1500 3450 50000 350.16-16

BLACK EAGLE COLOGAD Back Eagle + Colorgard MAIN FEATUES COLOGAD, dual colour safety feature with extra thick cover for superior abrasion resistance. Plyamide-11 core tube for cleanliness Weight up to 7.5 kg/m Smaller OD than flexible pipe allows more hose per reel Excellent chemical resistance providing long service life in sea water Flexible, lightweight, chemical resistant alternative to steel or flexible pipe. Used for high volume pumping in well service applications such as cementing, chemical injection and other onshore and subsea well stimulation operations. Available in long continuous lengths (500m to,000m depending on size). CONSTUCTION: Core tube: Pressure reinforcement: Cover: Colour: PA11 High strength wire Extra thick polyurethane cover ColorGard TM Safety feature (red inner, black outer cover) TEMPEATUE ANGE: Back Eagle -40 o C up to +70 o C 448N-0V80 50.5 1.1/4-0.5 690 10000 175 5000 400 3.80 640N-4V80 38.0 1.1/ -4 70.5 690 10000 300 33350 500 7.0 640N-4V80-15k 38.0 1.1/ -4 66.0 1035 15000 330 33750 500 6.50 448N-3V80 50.5-3 80.5 345 5000 1380 0000 500 8.50 BL/ 0N-3V80 50.5-3 84.5 690 10000 175 5000 800 9.40 BL/ 648N-3V80 50.5-3 86.0 1035 15000 330 33750 800 1.10 CX 40N-48V80 75.0 3-48 114.0 345 5000 86 1500 1000 11.50 TX 440N-48V80 75.0 3-48 1.0 690 10000 1380 0000 1100 18.70 640N-48V80 75.0 3-48 130.0 1035 15000 330 33750 100 7.50 Golden Eagle 640M-4V88 38.0 1.1/ -4 70.5 690 10000 300 33350 600 7.0 448M-3V88.0-3 8.0 345 5000 1380 0000 600 8.50 BL/ 0M-3V88.5-3 84.5 690 10000 175 5000 600 9.40 BL - 17

THEMOPLASTIC HOSES CHEMJEC Type 40D Ultra high pressure - Pipe cleaning Ultra high pressure hose for cleaning of pipes, heat exchangers, etc. in the chemical and oil industries. The hose can be used as a flexible lance with pressure over 750 bar. The hose is available as a special hose with stainless steel wicker work for added external protection. The hose is marked with manufacturer, type of hose, working pressure and production date. CONSTUCTION: Covering: Blue Polyamide einforcement: layers steel wire spiral Polyoxymethylene TEMPEATUE ANGE: 10 o C to +70 o C for water 40D-0V3 3.0 1/8-0 7.0 1100 16950 750 39875 60 0.07 TX/AX 40D-05V3 4.0 5/3-05 7.7 100 17400 3000 43500 75 0.10 TX/AX 40D-03V3 4.8 3/16-03 9.5 1000 14500 800 400 95 0.0 TX/AX 40D-04V3 6.3 1/4-04 11.5 1000 14500 500 3630 110 0.6 TX/AX 40D-05V3 7.9 5/16-05 13.3 900 13050 50 3610 10 0. TX/AX Ultra high pressure hose for cleaning-applications. Particularly suitable for use in water jet cleaning in production, shipbuilding, ships, tanks, concrete work, etc. Well suited for removing dirt, rust, paint, cement, asphalt, etc. The hose is marked with manufacturer, type of hose, working pressure and production date. Type 388N Ultra high pressure - Blueline Water Jetting CONSTUCTION: Covering: Blue Polyurethane, AL 5001 einforcement: layers steel wire spiral and open layers steel wire spiral Polyamide TEMPEATUE ANGE: 40 o C to +70 o C for water 388N-04V1W 6.3 1/4-04 13.3 180 180 300 46400 80 0.30 BS 388N-08V1W 13.0 1/ -08 3.0 1100 15950 750 39875 100 0.80 BS - 18

THEMOPLASTIC HOSES WATE JETTING HOSES Type 440D/440N Ultra high pressure - Water Jetting Ultra high pressure hose for cleaning-applications. Particularly suitable for use in water jet cleaning in production, shipbuilding, ships, tanks, concrete work, etc. Well suited for removing dirt, rust, paint, cement, asphalt, etc. The hose is marked with manufacturer, type of hose, working pressure and production date. CONSTUCTION: Covering: Polyamide, V3=Blue, V30=Black einforcement: 4 layers steel wire spiral 440D Polyoxymethylene 440N Polyamide TEMPEATUE ANGE: 40 o C to +70 o C for water 440D-05V3 4.0 5/3-05 10.4 00 31900 00 79750 100 0.1 440D-03V3 4.8 3/16-03 11.5 1800 6090 4400 650 10 0.8 440D-04V3 6.4 1/4-04 1.5 1640 3770 4100 5940 1 0.33 440D-05V3 8.1 5/16-05 15.1 1500 1740 3750 350 175 0.44 440N-06V30 9.7 3/8-06 19.4 1400 090 3500 5070 190 0.73 440N-08V30 1.8 1/ -08.5 1300 18840 350 47100 00 0.94 440N-1V30 19.6 3/4-1 30.0 1000 14490 500 3630 50 1.39 440N-16V30 5.0 1-16 37.0 900 13040 50 3610 300.00 Ultra high pressure hose for cleaning-applications. Particularly suitable for use in water jet cleaning in production, shipbuilding, ships, tanks, concrete work, etc. Well suited for removing dirt, rust, paint, cement, asphalt, etc. The hose is marked with manufacturer, type of hose, working pressure and production date. Type 0N Ultra high pressure - Blueline Water Jetting CONSTUCTION: Covering: einforcement: TEMPEATUE ANGE: Blue Polyurethane 4 layers steel wire spiral and open layers steel wire spiral Polyamide 40 o C to +70 o C for water 0N-06V1 9.8 3/8-06 1.6 1600 300 4000 000 95 0.94 BL 0N-08V1 1.9 1/ -08 5.0 1400 0300 3500 50750 110 1.19 BL 0N-1V1 19.8 3/4-1 3.6 100 17400 3000 43500 170 1.76 BL - 19

THEMOPLASTIC HOSES WATE JETTING HOSES Type 640D/640N Ultra high pressure - Water Jetting Ultra high pressure hose for cleaning-applications. Particularly suitable for use in water jet cleaning in production, shipbuilding, ships, tanks, concrete work, etc. Well suited for removing dirt, rust, paint, cement, asphalt, etc. The hose is marked with manufacturer, type of hose, working pressure and production date. CONSTUCTION: Covering: Blue Polyamide einforcement: 6 layers steel wire spiral 640D Polyoxymethylene 640N Polyamide TEMPEATUE ANGE: 40 o C to +70 o C for water 640D-05V3 4.0 5/3-05 1.0 800 40600 7000 101500 140 0.9 HX/ 640D-03V3 4.8 3/16-03 13.0 500 3630 650 900 175 0.41 HX/ 640D-04V3 6.4 5/16-04 14.6 500 3650 650 9065 00 0.64 HX/ 640D-05V3 8.0 5/16-05 16.9 100 30430 0 76090 5 0.68 HX/ 640N-08V3 1.8 1/ -08 4.5 1800 6090 4500 650 90 1.36 HX/ 640N-1V3 19.6 3/4-1 33.0 1400 090 3500 5070 350.10 HX/ 640N-16V3 5.0 1-16 40.0 100 17390 3000 43480 400.90 HX/ Type 740D Ultra high pressure - Water Jetting Ultra high pressure hose for cleaning-applications. Particularly suitable for use in water jet cleaning in production, shipbuilding, ships, tanks, concrete work, etc. Well suited for removing dirt, rust, paint, cement, asphalt, etc. The hose is marked with manufacturer, type of hose, working pressure and production date. CONSTUCTION: Covering: ed or yellow Polyamide einforcement: 6 layers steel wire spiral Polyoxymethylene TEMPEATUE ANGE: 40 o C to +70 o C for water 740D-05V16 4.0 5/3-05 1.0 3000 43500 7800 113100 10 0.40 HX 740D-03V34 4.8 3/16-03 13. 800 40600 7000 101500 00 0.47 HX 740D-05V34 7.8 5/16-05 17. 500 3650 650 9065 00 0.70 HX 740D-08V30 1.7 1/ -08 7.0 000 9000 5000 7500 300 1.85 HX - 0

THEMOPLASTIC HOSES WATE JETTING HOSES Type 840D Ultra high pressure - Water Jetting Ultra high pressure hose for cleaning-applications. Particularly suitable for use in water jet cleaning in production, shipbuilding, ships, tanks, concrete work, etc. Well suited for removing dirt, rust, paint, cement, asphalt, etc. Can replace the steel pipes where flexibility is required. The hose is marked with manufacturer, type of hose, working pressure and production date. CONSTUCTION: Covering: ed Polyamide einforcement: 8 layers steel wire spiral Polyoxymethylene TEMPEATUE ANGE: 40 o C to +70 o C for water 840D-03V34 4.8 3/16-03 15.0 4000 000 8000 116000 00 0.66 WX 840D-05V34 7.8 5/16-05 19.5 3000 43500 7000 101500 50 1.10 WX 840D-08V30 1.7 1/ -08 9.8 500 3650 650 9065 350.50 WX - 1

CHEMICAL TLE THEMOPLASTIC HOSES atings Code G -Good to excellent. Little or no swelling, tensile or surface changes. Preferred choice. L -Marginal or conditional. Noticeable effects but not necessarily indicating lack of safety. Further testing suggested for specific application. P -Poor or unsatisfactory. Not recommended without extensive and realistic testing. -Indicates that this was not tested. Material Code for Hose Core Tubes polyflex / Parflex Part Numbers H N PV NC TFE POM Polyester elastomer Polyamide Polyvinylchloride (PVC) Nylon co polymer Polytetrafluorethylene (PTFE) Polyoxymethylene Material Code for Hose Covers 040H, 370H, 5H, 8B, 8C, 0H, 8H, LT, 0, 590, 593, 10LT 010N, 00N, X0N, 040N, 44N, 45N, 370N, 440N, 380N, 640N, 50N, 0N, 573X, 573XL, 57, 0N, 8N,, 8 GPH 0A, 5A 030T, 033T, 919, 99, 939/939B, 919U 440D, 640D U Polyurethane 010N, 040N, 040H, 44N, 45N, 370H, 370N, 380N, 0, 830, 838, 5A, 5H, 0A, 8B, 0N, 0H, 8H 0, 50N, 0N, 8N, 590, 593,, 8, 919U HF Special elastomer LT, 10LT PV Polyvinylchloride (PVC) GPH H Polyester elastomer 040N PFX Special elastomer 8C N Polyamide 010N, 00N, X0N, 440D, 440N, 640D45N, 44N Material Code for Sealing Components V FKM O-rings Notes on the Chemical esistance Table (1) The fluid resistance tables are simplified rating tabulations based on immersion tests at 4 C. Higher temperatures tend to reduce ratings. Since final selection depends on pressure, fluid and ambient temperature and other factors not known to Parker Hannifin, no performance guarantee is expressed or implied. The indications do not imply any compliance with standards and regulations and do not refer to possible changes of colour, taste or smell. For food and drinking water specially approved materials have to be used. For fluids not listed or for advice on particular applications, please consult Parker Hannifin GmbH, Polyflex Division in Hüttenfeld, Germany. () Hose applications for these fluids must take into account legal and insurance regulations. The chemical resistance indicated does not express or imply approval by certain institutions. (3) Satisfactory at some concentrations and temperatures, unsatisfactory at others. (4) For gas applications, the cover should be pin-pricked and the pressure must not be released quickly. Special safety guard accessories are to be used to prevent damage or personal injury in the event of failure. (5) Chemical resistance does not imply low permeation rates. Please consult Parker Hannifin for a recommendation for your specific requirements (6)The indication of chemical resistance does not imply any special food compatibility; it refers only to the chemical resistance of the material. (7)Chemical resistance does not imply acceptability for use in airless paintspray applications. These applications require a special, electrically conductive hose. -

CHEMICAL TLE THEMOPLASTIC HOSES - 3

CHEMICAL TLE THEMOPLASTIC HOSES - 4

CHEMICAL TLE THEMOPLASTIC HOSES - 5

CHEMICAL TLE THEMOPLASTIC HOSES - 6