Description Single, two and three pole rocker switch/thermal trip free circuit breakers (S-type TO CBE to EN 609) of compact design for snap-in panel mounting. Available either with protection on one/both/all poles or, in the case of the double pole version, protection on one pole only. Illumination is optional and there is a choice of rocker colours. Approved to CBE standard EN 609 (IEC 609). Typical applications Motors, transformers, solenoids, household and office machines, electrical tools, mobile homes, boating, construction vehicles, medical equipment to EN 6060. 330 pole 3 pole Standard current ratings and typical internal resistance values Current Internal resistance Current Internal resistance rating (A) per pole (Ω) rating (A) per pole (Ω) 0. 94 4 0.0435 0. 4 5 0.035 0.3 6 0.05 0.4 5.30 7 0.065 0.5 4.0 8 0.065 0.8.50 0 < 0.0 0.9 < 0.0. 0.80 4 < 0.0.5 0.45 5 < 0.0 0.7 6 < 0.0.5 0.0785 8 < 0.0 3 0.0595 0 < 0.0 3.5 0.0565 Illumination voltage/power consumption operating voltage power consumption filament/neon (B) LED (G, R, Y) 6 V 60 ma 9 ma V 0 ma 9 ma 4 V 0 ma 9 ma 48 V 0 ma.5 ma 5 V <.5 ma < ma* 30 V <.5 ma < ma* 45 V < ma not available * single pole version only Approvals Authority Voltage rating Current rating VDE (EN 609) AC 40/45 V 0...0 A single pole 0...6 A multi pole DC 50 V 0...8 A single pole 0...6 A multi pole DC 8 V 0...0 A single pole UL, CSA AC 50 V, DC 50 V 0...6 A and pole 3 AC 50 V 0... A 3 pole Technical data For further details please see chapter: Technical Information Voltage rating AC 40 V; 3 AC 45 V; DC 50 V (UL: AC 50 V; 3 AC 50 V; DC 50 V) Current ratings 0...0 A pole 0...6 A and 3 pole Typical life pole AC 40 V: 0...0 A 30,000 operations at x I N, inductive DC 50 V: 0...4 A 30,000 operations at x I N, inductive 4.5...6 A 30,000 operations at x I N, resistive DC 8 V: 4.5...0 A 30,000 operations at x I N, inductive pole AC 40 V: 0...6 A 50,000 operations at x I N, inductive DC 50 V: 0...6 A 50,000 operations at x I N, inductive 3 pole 3 AC 45 V: 0...6 A 30,000 operations at x I N, inductive Ambient temperature -30...+60 C (-...+40 F) Insulation co-ordination rated impulse pollution (IEC 60664 and 60664 A) withstand voltage degree.5 kv reinforced insulation in operating area Dielectric strength (IEC 60664 and 60664A) test voltage operating area AC 3,000 V current path/current path AC,500 V Insulation resistance >00 MΩ (DC 500 V) Interrupting capacity I cn 0... A 0 x I N.5...0 A 50 A pole.5...6 A 50 A pole.5... A 50 A 3 pole 4 + 6 A 30 A 3 pole Interrupting capacity I N 0... A 4...6 A (UL 077) + pole AC 50V/3500A AC 50V/3500A 3 pole 3AC 50V/5000A + pole DC 50V/000A DC 50V/000A Degree of protection operating area IP40 (IEC 6059/DIN 40050) terminal area IP00 Vibration 5 g (57-500 Hz), ±0.38 mm (0-57 Hz) to IEC 60068--6, test Fc 0 frequency cycles/axis Shock pole: 5 g ( ms) + 3 pole: 0 g ( ms) to IEC 60068--7, test Ea Corrosion 96 hours at 5 % salt mist, to IEC 60068--, test Ka Humidity 40 hours at 95 % RH, to IEC 60068--3, test Ca Mass approx. 45 g (three pole) approx. 3 g (double pole) approx. 7 g (single pole) All dimensions without tolerances are for reference only. In the interest of improved design, performance and cost effectiveness the right to make changes in these specifications without notice is reserved.product markings may not be exactly as the ordering codes. Errors and omissions excepted. 05/06(0505) www.e-t-a.com
Ordering information - pole Type No. 330 rocker switch/circuit breaker Mounting F snap in frame Frame standard 3 special single pole version Number of poles single pole, thermally protected A pole, unprotected** Frame mounting 0 -.5 mm (.039-.099 in) (only 330-F..-...).5-3. mm (.059-.6 in)(only 330-F3.-...) Terminal design P7 blade terminals DIN 4644-C-Ms-S (QC x.0) H7 for terminals.,. 3. terminal screws M 3.5 for terminals.,., 3. blade terminals (QC x.0) N7 blade terminals (QC x.0), with shunt terminal Characteristic curve T thermal,.05-.4 I N Q switch, only with terminal design -N7 Switch style W rocker U momentary switch function Switch colour designation opaque translucent 0 black white 0 white 4 red 04 red 9 green 09 green 9 black, rocker with green dot Rocker markings A dot ( position, only with switch colour designation 9) Q "I" and "O" moulded in Rocker illumination (optional). Q Y white rocker, yellow LED, AC/DC. 4 Q R red rocker, red LED, AC/DC. 9 Q Y green rocker, yellow LED, AC/DC. 9 A G black rocker with dot, green LED Illumination voltage range* (optional) 4-7 V (G,R,Y) 0-4 V (G,R,Y) 3 0-8 V (G,R,Y) 4 4-54 V (R,Y) 6 90-40 V (R,Y) 7 85-75 V (R,Y) X LED, DC 8-0 ma *** Current ratings 0...0 A 330 - F 0 - P7 T - W Q Y 7-5 A ordering example * N/A for non-illuminated version ** unprotected poles have to ordered with terminal design N7 *** without series resistor and diode, to be selected by customer. Recommendation: 4-7 V Rv 0.43 kω 0-4 V Rv. kω 0-8 V RV.7 kω diode N4007 Ordering information - multipole Type No. 330 rocker switch/circuit breaker multipole Mounting F snap in frame Frame standard Number of poles pole, thermally protected 3 3 pole, thermally protected 5 pole, thermally protected on one pole only 6 3 pole, thermally protected on two poles only B pole, unprotected** C 3 pole, unprotected** Frame mounting 0 -.5 mm (.039-.099 in) (only 330-F..-...) Terminal design P7 blade terminals DIN 4644-C-Ms-S (QC x.0) H7 for terminals.,. 3. terminal screws M 3.5; for terminals.,., 3. blade terminals (QC x.0) N7 blade terminals DIN 4644-C-Ms-S (QC x.0), with shunt terminal Characteristic curve T thermal,.05-.4 I N Q switch, only with terminal design -N7 Switch style W rocker U momentary switch function Switch colour designation opaque translucent 0 black white 0 white 4 red 04 red 9 green 09 green Rocker markings Q "I" and "O" moulded in Rocker illumination (optional) B filament ( AC/DC 48 V), neon ( AC 5 V) G green LED, DC R red LED, DC Y yellow LED, DC Illumination voltage range* (optional) 4-7 V (B,G,R,Y) 0-4 V (B,G,R,Y) 3 0-8 V (B,G,R,Y 4 4-54 V (B,R,Y 6 90-40 V (B) 7 85-75 V (B) 8 30-450 V (B) Current ratings 0...6 A 330 - F 3 0 - P7 T - W Q B 7-5 A ordering example * N/A for non-illuminated version ** unprotected poles have to ordered with terminal design N7 www.e-t-a.com 05/06(0505)
Dimensions 330-F0-5.85.30 switch only 0. 0 33.394.30 terminal for illumination conductor size 0.4 mm (AWG6), length 80 mm (7.09 in.) 4.5.57 9.5.374 blade terminals DIN 4644-C-Ms-S (QC x.0 P7 or N7) 330-F30-5.85.30 0. 0 33.394.30 37.5.48 3.5.8 3 I unit blade terminals DIN 4644-C-Ms-S (QC x.0 P7 or N7) R3.8 flat head screw M3.5x5 -MS ISO 580 (H7) 36.4 illuminated dot (-.9AG.-) 330-F0-5.85.30 0. 8.709 0 33.394.30 -.5 mm (.039-.098 in.) -0. -.06 ±0. +0.. +.008 6.0.87 <.00 +0.3 +.0 min..5 4.6 +0..575 +.008 I unit blade terminals DIN 4644-C-Ms-S (QC x.0 P7 or N7) R3.8 36.4 optional illumination 330-F3-5.85.30 flat head screw M3.5x5 -MS ISO 580 (H7) 0. 4.6 0 33.394.30 -.5 mm (.039-.098 in.) terminal for illumination conductor size 0.4 mm (AWG6), length 80 mm (7.09 in.) -0. -.06 ±0. 7.8.70 +0.3 +.0 9.5.374 blade terminals DIN 4644-C-Ms-S (QC x.0 P7 or N7) +0.. +.008 <.00 min..5 37.6 +0..48 +.008 R3.8 flat head screw M3.5x5 -MS ISO 580 (H7) 36.4 optional illumination 9.5.6 -.5 mm (.039-.098 in.) ±0. +0.. +.008 <.00 +0.3 +.0 min..5 6. +0..03 +.008 R.5.059 mm.50.35 3.0 A flat head screw M3.5x5 -MS ISO 580 (H7) optional illumination 39.5.56.059.093.6 9.5.768 B mm +0.5 +.006 35.38 +0.5 +.006 36.4 +0.5 +.006 37.46 A -0. -.06 ±0. B <.00 +0.3 +.0 min..5 8 +0..709 +.008 05/06(0505) www.e-t-a.com
Installation drawing 330-F... Internal connection diagrams When installing the circuit breaker apply pressure on bezel only. operating area pole line pole switch line 0.394 5.984 lamp lamp 3.6 pole line.i pole momentary switch line 8 5 7.35.97 0 mounting area.76 7.76 Typical time/current characteristics. lamp Multipole types: all poles symmetrically ed. With single pole over, thermal tripping will be at approx..54 x I N with pole devices and at approx..68 x I N with 3 pole devices. 0. A 0000 000 +60 C +40 F +3 C +73.4 F -30 C - F 3 pole line.i. 3.I 3. pole momentary switch line.i.3 Trip time in seconds 00 0 Accessories 330-F30-... Splash cover, transparent, for 3 pole version X 58 0 (IP54), comprising bezel Y 306 09 0 and transparent cover Y 306 08 0 4.5.63 0. 4 6 8 0 0 40 times rated current.5 0 A pole.5 6 A and 3 pole 0000 +60 C +40 F +3 C +73.4 F 5.97 36.5.44 50.97.47 000-30 C - F ø4.4.73 ø.433 Trip time in seconds 00 0 ø8.35 50.97 55.7 0. 4 6 8 0 0 40 times rated current The time/current characteristic curve depends on the ambient temperature prevailing. In order to eliminate nuisance tripping, please multiply the circuit breaker current ratings by the derating factor shown below. See also section 9 Technical information. Ambient temperature F - -4 +4 +3 +73.4 +04 + +40 C -30-0 -0 0 +3 +40 +50 +60 Derating factor 0.8 0.76 0.84 0.9.08.6.4 www.e-t-a.com 05/06(0505)
Description Single pole rocker switch/thermal trip free circuit breakers (S-type TO CBE to EN 609) of compact design for snap-in panel mounting. Available either with protection on one/both/all poles or, in the case of the double pole version, protection on one pole only. Illumination is optional and there is a choice of rocker colours. Approved to CBE standard EN 609 (IEC 609). Typical applications Motors, transformers, solenoids, household and office machines, electrical tools, mobile homes, boating, construction vehicles, medical equipment to EN 6060. 330 water splash protected (IP 66) Standard current ratings and typical internal resistance values Current Internal resistance Current Internal resistance rating (A) per pole (Ω) rating (A) per pole (Ω) 0. 94 4 0.0435 0. 4 5 0.035 0.3 6 0.05 0.4 5.30 7 0.065 0.5 4.0 8 0.065 0.8.50 0 < 0.0 0.9 < 0.0. 0.80 4 < 0.0.5 0.45 5 < 0.0 0.7 6 < 0.0.5 0.0785 8 < 0.0 3 0.0595 0 < 0.0 3.5 0.0565 Illumination voltage/power consumption operating voltage power consumption filament/neon (B) LED (G, R, Y) 6 V 60 ma 9 ma V 0 ma 9 ma 4 V 0 ma 9 ma 48 V 0 ma.5 ma 5 V <.5 ma < ma 30 V <.5 ma < ma 45 V < ma not available Approvals Technical data For further details please see chapter: Technical Information Voltage rating AC 40 V; DC 50 V (UL: AC 50 V; DC 50 V) Current ratings 0...0 A Typical life AC 40 V: 0...0 A 30,000 operations at x I N, inductive DC 50 V: 0...4 A 30,000 operations at x I N, inductive 4.5...6 A 30,000 operations at x I N, resistive DC 8 V: 4.5...0 A 30,000 operations at x I N, inductive Ambient temperature -30...+60 C (-...+40 F) Insulation co-ordination rated impulse pollution (IEC 60664 and 60664 A) withstand voltage degree.5 kv reinforced insulation in operating area Dielectric strength (IEC 60664 and 60664A) test voltage operating area AC 3,000 V current path/current path AC,500 V Insulation resistance >00 MΩ (DC 500 V) Interrupting capacity I cn 0... A 0 x I N.5...0 A 50 A Interrupting capacity 0... A 4...6 A (UL 077) AC 50V/3500A AC 50V/3500A DC 50V/000A DC 50V/000A Degree of protection operating area IP66 (IEC 6059/DIN 40050) terminal area IP00 Vibration 5 g (57-500 Hz), ±0.38 mm (0-57 Hz) to IEC 60068--6, test Fc 0 frequency cycles/axis Shock 5 g ( ms) to IEC 60068--7, test Ea Corrosion 96 hours at 5 % salt mist, to IEC 60068--, test Ka Humidity 40 hours at 95 % RH, to IEC 60068--3, test Ca Mass approx. 7 g Authority Voltage rating Current rating VDE (EN 609) AC 40/45 V 0...0 A DC 50 V 0...8 A DC 8 V 0...0 A UL, CSA AC 50 V, DC 50 V 0...6 A 05/06(0705) www.e-t-a.com
Ordering information - IP 66 Type No. 330 rocker switch/circuit breaker Mounting F snap in frame Frame splash water protected Number of poles single pole, thermally protected A pole, unprotected ** Frame mounting -3.5 mm Terminal design P7 blade terminals DIN 4644-C-Ms-S (QC x.0) H7 for terminals. terminal screws M 3.5 for terminals. x.0 blade terminals N7 blade terminals DIN 4644-C-Ms-S (QC x.0), with shunt terminal or for switch only Characteristic curve T thermal,.05-.4 I N Q switch, only with terminal design -N7 Switch style S 00 without actuator rocker X 40.. must be ordered separately. Available symbols see following pages. S rocker P momentary switch Switch colour designation (not S00) opaque translucent 0 black white 0 white 4 red 04 red 9 green 09 green Switch markings 0 without actuator Q "I" and "O" moulded in Switch illumination. Q Y white rocker, yellow LED, AC/DC. 4 Q R red rocker, red LED, AC/DC. 9 Q Y green rocker, yellow LED, AC/DC S 00 0 Y without rocker, LED yellow, AC/DC Illumination voltage range* 4-7 V (R,Y) 0-4 V (R,Y) 3 0-8 V (R,Y) 4 4-54 V (R,Y) 6 90-40 V (R,Y) 7 85-75 V (R,Y) X LED, DC 8-0 ma *** Current ratings 0...0 A 330 F - P7 T - S Q Y 7-5 A ordering example * N/A for non-illuminated version ** unprotected poles have to ordered with terminal design N7 *** without series resistor and diode, to be selected by customer. Recommendation: 4-7 V Rv 0,43 kω 0-4 V Rv, kω 0-8 V RV,7 kω diode N4007 Dimensions 330-F-... 4.3.563 Installation drawing 330-F-... 0.394 3.6 GERMANY 0. 44.73 illuminated trip indication (optional).7.067 8.0 0.394.5.886 terminal for illumination flying lead conductor size 0.4 mm, length 80 mm (7.09 in.) - 3.5 mm (-.38 in.) 6.6 +0..654 +.008 operating area blade terminals DIN 4644-C-Ms-S (QC x.0 P7 or N7) 5.984 flat head screw M3.5x5 -MS ISO 580 (H7) -0. sharp edged -.06 ±0. +0. 38 +.008.50 <.00 R.039 8 5 7 7.35.97.76.76 0 mounting area min..5 www.e-t-a.com 05/06(0705)
Internal connection diagrams Typical time/current characteristics pole 0. A line 0000 +60 C +40 F 000 +3 C +73.4 F -30 C - F pole switch line lamp pole momentary switch line Trip time in seconds 00 0 lamp lamp 0. 4 6 8 0 0 40 times rated current.5 0 A 0000 000 +60 C +40 F +3 C +73.4 F -30 C - F Trip time in seconds 00 0 0. 4 6 8 0 0 40 times rated current The time/current characteristic curve depends on the ambient temperature prevailing. In order to eliminate nuisance tripping, please multiply the circuit breaker current ratings by the derating factor shown below. See also section 9 Technical information. Ambient temperature F - -4 +4 +3 +73.4 +04 + +40 C -30-0 -0 0 +3 +40 +50 +60 Derating factor 0.8 0.76 0.84 0.9.08.6.4 05/06(0705) www.e-t-a.com
Accessories Rocker X 40.. How to exchange rockers Symbols/legends available Navigation instruments NAV X 40 4 symbol X 40 GERMANY Caution! Use care not to damage the seal. Music Heating Shower pump X 40 5 X 40 6 X 40 7 X 40 8 Icebox Ice X 40 9 Symbols/legends available Water for windshield wiper X 40 0 Interior light X 40 0 Weigh anchor UP X 40 Anchor light X 40 0 Drop anchor DOWN X 40 Cockpit light X 40 03 Search light X 40 3 Navigation light X 40 04 Autopilot X 40 4 AUTO VHF radio X 40 05 Trim flaps X 40 5 Refrigerator X 40 06 Mast lift X 40 6 Anchor Windshield wiper Bilge pump Potable water Horn X 40 07 X 40 08 X 40 09 X 40 0 X 40 Navigation lights (sailing ship) Cockpit light (sailing ship) Deck light (sailing ship) Anchor light (sailing ship) X 40 7 X 40 8 X 40 9 X 40 30 Ventilation fan X 40 Further symbols upon request. Panel light X 40 3 S00 switch style: white translucent rocker coated with black lacquer with laser marked symbols that appear in white translucent. Blanking piece (black) 330-3870 4.3.563.7.067 GERMANY 8.0. -0. sharp edged -.06 44.73.5.886-3.5 mm (-.38 in.) ±0. +0. 38 +.008.50 <.00 min..5 6.6 +0..654 +.008 All dimensions without tolerances are for reference only. In the interest of improved design, performance and cost effectiveness the right to make changes in these specifications without notice is reserved.product markings may not be exactly as the ordering codes. Errors and omissions excepted. www.e-t-a.com 05/06(0705)