STATE OF MINNESOTA PRICING PAGE Page 1 of 1 PLEASE PURCHABert's Truck Equipment, Inc Contact Person: Jim McLaughlin Street Address: 3804 Highway 75 North P.O. Box: 336 City, State, Zip Moorhead, MN 56561-0336 Phone #: 218-233-8681 Toll Free #: 800-232-3787 Fax #: 218-233-9548 Email Address: jimmc@bertsonline.com Website: www.bertsonline.com Excel 97-2003 Workbook (.xls) 2003 (11.8347.8403) SP3 3.0 SANDERS Make Warranty Boss Spreaders Two Year Limited Warranty Date & I.D. of Price List 2/1/2016 * Discount to be applied to Price List (see note below) 0 Cost to assemble sander Installation of sander as per spec 3.3 DELIVERY CHARGES - SEE SPECIAL TERMS AND CONDITIONS See Price Schedule See Price Schedule NO FLAT RATE ALLOWED DELIVERY STARTING POINT - City, State, Zip Moorhead, MN Price per loaded mile $ 2.00 Per Hour Shop Rate $ 100.00 *Note: The "Discount to be Applied to Price List" must be a numberic percentage. Not listing a numberic percentage may result in the bid being rejected.
PLEASE State Of Minnesota Bert's Truck Equipment 10/24/2013 (Amended 1/1/2015) Boss Spreaders Boss Tailgate Spreaders 3.0-1 Boss TGS-600 (6 Cu ft) with reciever mount (Not recommended for sand) $ 1,375.00 3.0-2 Boss TGS-800 (8 Cu ft) with Reciever Mount (will spread salt or Sand) $ 2,340.00 3.0-3 Boss TGS-1100 (11 Cu Ft) with Reciever Mount (Not Recommended for Sand) $ 1,595.00 3.0-4 RT3 Attachment add $ 75.00 3.0-5 Installation of Boss Tailgate Spreaders $ 235.00
Boss V-Box Spreaders
3.0-6 Boss 8' VBX 8000 Spreader (Chain drive or Auger Drive) $ 4,960.00 3.0-7 Boss 9' VBX 8000 Spreader (Chain drive or Auger Drive) $ 5,795.00 3.0-8 Installation of Boss V-box Spreaders $ 335.00 Manufactures Standard Two year Warranty Cost per mile for pick-up or Delivery to or from Moorhead, MN $ 2.00 (Maximum charge per unit for pick-up/delivery one way $ 425.00) Buyer s Guide for Boss Spreaders. Make and Model of Chassis: Spreader Installation Charges Delivery Total Package Body and Equipment By: Bert s Truck Equipment Inc. Jim McLaughlin, Commercial Fleet Sales 3804 Hwy 75 North Moorhead, MN 56560 800-232-3787, 218-233-8681 Fax 218-233-9548 Email: jimmc@bertsonline.com Web Site: www.bertsonline.com
STATE OF MINNESOTA PRICING PAGE Page 1 of 2 PLEASE PURCHABert's Truck Equipment, Inc Contact Person: Jim McLaughlin Street Address: 3804 Highway 75 North P.O. Box: 336 City, State, Zip Moorhead, MN 56561-0336 Phone #: 218-233-8681 Toll Free #: 800-232-3787 Fax #: 218-233-9548 Email Address: jimmc@bertsonline.com Website: www.bertsonline.com Excel 97-2003 Workbook (.xls) 2003 (11.8347.8403) SP3 3.0 SANDERS Make Warranty Swenson PV Spreaders One Year Date & I.D. of Price List 2/1/2016 * Discount to be applied to Price List (see note below) 0 Cost to assemble sander Installation of sander as per spec 3.3 DELIVERY CHARGES - SEE SPECIAL TERMS AND CONDITIONS See Price Schedule See Price Schedule NO FLAT RATE ALLOWED DELIVERY STARTING POINT - City, State, Zip Moorhead, MN Price per loaded mile $ 2.00 Per Hour Shop Rate $ 100.00
STATE OF MINNESOTA PRICING PAGE Page 2 of 2 *Note: The "Discount to be Applied to Price List" must be a numberic percentage. Not listing a numberic percentage may result in the bid being rejected.
PLEASE State Of Minnesota Bert's Truck Equipment 10/24/2013 (Amended 2-1-16) Page 1 of 4 7.00 Swenson Stainless Steel Insert Spreaders Standard Feature PV series spreaders are designed to be mounted in the bed of a pick up, dump bed or flat bed truck for use in areas where larger vehicles can not go 12,500 lbs tensile strength self cleaning pintle chain for improved conveyor performance 45 degree slope on hopper sides to insure materials flow to the conveyor Inverted vee forming located over the conveyor chain reduces the load on conveyor chain and helps prevent tunneling Top screens to prevent larger chunks and debris from entering hopper Shielded high center stop light is installed on spreader to meet federal lighting requirements Spinner frame works for pick up or dump box mounting applications Durable 13" polyurethane disc for greater life and improved spread pattern 3 adjustable external spinner baffles to restrict size of spread pattern 4' - 30' spread pattern Standard features: Top screens Inverted vee Center lift point Replaceable bolt-in conveyor floor In cab controls (engine drive) (OPTINONAL) Wireless controls - engine drive (STANDARD) Heavy duty engine shroud Patent Pending Fork Pockets for easier handling of spreader PV358ESTS 8 ft self contained spreader 50" width Hopper is constructed with 14 ga corrosion resistant stainless steel sides Battery cables and hold downs will be supplied for mounting and hooking up the battery and ends for a durable light weight unit Drop N Lock top screen - one piece side hinged - No tools required to remove 14 ga stainless steel replaceable bolt-in conveyor floor 14 ga SS bolt-in replaceable chain shields Hopper provides 2.0 cubic yards of capacity NO BATTERY IS SUPPLIED WITH UNIT Capacity: 2.0 cu yds Color: Stainless steel PV358ESTS (Drive: 10.5 HP Briggs & Stratton, Hopper material: Stainless 7.0-1 steel) $ 4,548.00 7.0-2 11 HP Honda Engine ILO 10.5 B & S add $ 395.00 7.0-3 Electric Dual Motors ILO 10.5 B& S Add $ 495.00
Page 2 of 4 MDV SERIES Medium Duty Vee Box MDV series spreaders are designed to be mounted in a dump bed or on a flat bed truck utilizing the 15,000 lbs - 20,000 lbs rated vehicles to stay below the federal CDL WIRELESS controls for gas driven spreaders 12,500 lbs tensile strength self cleaning pintle chain for improved conveyor performance 45 degree slope on hopper sides to insure materials flow to the conveyor Inverted vee forming located over the conveyor chain reduces the load on conveyor chain and helps prevent tunneling 4 section hinged top screens to prevent larger chunks and debris from entering hopper 24" tall swing up spinner frame provided positions disc closer to ground to reduce amount of material striking other vehicles Durable 13" polyurethane disc for greater life and improved spread pattern 2 adjustable internal spinner baffles to adjust spread pattern from left to right 3 adjustable external spinner baffles to restrict size of spread pattern No battery is supplied with unit 9 and 10' self contained spreader Hopper provides 4.0 cubic yard capacity WIRELESS controls for gas driven spreaders Hopper is constructed with 12 ga corrosion resistant stainless steel sides and ends for a durable light weight unit 12 ga stainless steel replaceable bolt in conveyor floor Battery cables and hold down will be supplied for mounting and connecting the battery No battery is supplied with unit Capacity: 4.& 4.5cu. yds. Color: Stainless Steel 7.0-4 9' MDV944ESTSS Honda 11HP, Hopper Material: Stainless Steel $ 8,895.00 7.0-5 10' MDV1044ESTSS Honda 11 Hp, Hopper Material: Stainless Steel $ 8,995.00 7.0-6 Hydraulic Drive ILO Honda $ (800.00) 7.0-7 Dual Moter Electric ILO Honda add $ 300.00 Swenson "Poly Hawk" Spreader General Specifications Page 3 of 4
Fits most standard 3/4-ton pickup truck beds Spreads free flowing materials - sand or salt or mixture Top screen and inverted vee included V-Box is molded in Swenson Safety Orange Gas driven spreaders features wireless contoller Comes fully assembled and ready for installation Stainless steel engine shroud Patent Pending Fork Pockets Hopper Polyethylene triple crimped top edge provides rugged durability Swenson's unprecedented 10 Year Limited Hopper Warranty 45 degree sides allow free flow of material to the conveyor Conveyor 16 inch wide conveyor provides reliable, controlled material handling Replaceable stainless steel conveyor floor Maintenance free front idler bearing Spinner Assembly Heavy-duty stainless steel swing up spinner assembly simplifies clean out and storage 13" poly spinner disc 2 internal and 4 external baffles provide precise material spreading Overlapping baffles for improved spread control Spinner extension kit available 7.0-8 PolyHawk PV358EST B&S $ 5,225.00 7.0-9 PolyHawk PV358EST Honda $ 5,350.00 7.0-10 PolyHawk PV358 Electric $ 5,350.00 Spreader Options 7.20 Electric Variable speed control (wired) ILO Std $ 640.00 7.21 Electric Variable speed control (wiredless) Ilo Std $ 375.00 7.22 Large Deluxe pendent control $ 225.00 7.23 6" SS Side Extension kit $ 425.00 7.24 Vibrator Kit $ 230.00 7.25 Battery Harness Kit $ 350.00 7.26 12V Battery, and storage Box $ 115.00 7.27 Tie Down Kit (Buy1496505) $ 60.00 7.28 Tarp Kit for Stainless steel Spreaders $ 225.00 7.29 Tarp Kit for Ploy Hawk Spreaders $ 260.00 7.3-1 Installation of Swenson Spreaders (Gas Powered units) $ 435.00 7.3-2 Installation of Swenson Spreaders (Electric and Hydraulic Units) $ 635.00 Warranty: Manufactures Standard One year Warranty Page 4 of 4
Cost per mile for pick-up or Delivery to or from Moorhead, MN $ 2.00 (Maximum charge per unit for pick-up/delivery one way $ 425.00) Buyer s Guide for Swenson Spreader. Make and Model of Chassis: Spreader Installation Charges Delivery Total Package Body and Equipment By: Bert s Truck Equipment Inc. Jim McLaughlin, Commercial Fleet Sales 3804 Hwy 75 North Moorhead, MN 56560 800-232-3787, 218-233-8681 Fax 218-233-9548 Email: jimmc@bertsonline.com Web Site: www.bertsonline.com