All-Electric 55 Frame 21/24/29/34 oz Injection Unit Specifications A B C A B C Injection Capacity, Max GPPS* oz 21 29 34 gm 595 822 963 Theoretical Disp in^3 37.7 52.6 61.1 cm^3 618 862 1,001 Max Pressure @ Rate Max Rate @ Pressure 27,500 psi @ 17 in^3/sec 32 in^3/sec @ 25,903 psi 19,689 psi @ 23 in^3/sec 44 in^3/sec @ 18,546 psi 16,977 psi @ 27 in^3/sec 51 in^3/sec @ 15,991 psi 1,897 bar @ 279 cm^3/sec 524 cm^3/sec @ 1,786 bar 1,370 bar @ 377 cm^3/sec 721 cm^3/sec @ 1,279 bar 1,171 bar @ 442 cm^3/sec 835 cm^3/sec @ 1,103 bar Max Injection Speed in/sec 8.6 8.6 8.6 mm/sec 218 218 218 Optional Increased Speed * in/sec 11.7 11.7 11.7 mm/sec 297 297 297 Max Pack Pressure psi 27,500 23,200 17,000 bar 1,897 1,600 1,172 Max Pull Back Force lbf 17,000 17,000 17,000 N 75,620 75,260 75,260 Injection Stroke in 10.24 10.24 10.24 mm 260 260 260 Screw Diameter in 2.16 2.56 2.76 mm 55 65 70 Extruder L/d Ratio ** 23.6 20.0 18.6 23.6 20.0 18.6 Extruder Performance *** rpm 230 No. of Pyrometers (barrel/nozzle) 10/1 Total Heat Capacity kw 47.3 Sled Pull in Force ton 4.1 tonf 3.7 Tonnage ton tonf 400 Ejector Stroke in 7.87 mm 200 Max Ejector Force** ton 13 tonf 11.8 Max Eject Speed** in/sec 10.4 mm/sec 265 Machine Specifications**** Length, see note in 323 mm 8,204 Width in 82.4 mm 2,093 Height in 94.7 mm 2,405 Centerline Height in 58.0 mm 1,473 Shipping Weight (machine) lb 44,000 kg 19,958 Electrical Specifications*** 59 *Note: Increased injection velocity option will improve injection rates **Note: Increased L/d options available ***Note: Increased extruder rpm options available ****Note: All machine dimensions and specifications are subject to change. Values are for reference only. 6 gpm @ 50psi
1650 Hybid Frame* 20/24/33 oz Injection Unit Specifications A` A B A` A B Injection Capacity, Max GPPS* oz 20 24 33 gm 583 694 946 Theoretical Disp in^3 39 47 63 cm^3 641 763 1,039 Max Pressure @ Rate psi 36,997 31,088 22,838 bar 2,552 2,144 1,575 Max Rate @ Pressure in^3/sec 75 90 122 cm^3/sec 1,235 1,480 2,000 Max Injection Speed in/sec 20 21 20 mm/sec 508 533 508 Injection Stroke in 10.60 10.60 10.60 mm 269.24 269.24 269.24 Screw Diameter in 2.17 2.36 2.76 mm 55 60 70 Extruder L/d Ratio ** 25.0 Extruder Performance *** rpm 300 No. of Pyrometers (barrel/nozzle) 5/1 Total Heat Capacity kw 29.6-36.9 Sled Pull in Force ton 12.8 kn 115 Tonnage ton tonf 400 Ejector Stroke in 7.87 mm 200 Max Ejector Force**** ton 13 tonf 11.8 Max Eject Speed**** in/sec 10.4 mm/sec 265 Machine Specifications*** Length, see note in 323 mm 8,204 Width in 82.4 mm 2,093 Height in 94.7 mm 2,405 Centerline Height in 58.0 mm 1,473 Shipping Weight (machine) lb 44,000 kg 19,958 Electrical Specifications*** 59 *Note: Increased injection velocity option will improve injection rates **Note: Increased L/D options available ***Note: All machine dimensions and specifications are subject to change. Values are for reference only. ****Note: Increased eject speed and force options available (consult factory) 6 gpm @ 50psi
I45 Frame 72/96/130-70mm Injection Unit Specifications A B C A B C Injection Capacity, Max GPPS* oz 72 96 130 gm 2,041 2,722 3,685 Theoretical Disp in^3 134.1 178.6 243.1 cm^3 2,198 2,927 3,984 Max Pressure @ Rate Max Rate @ Pressure 30,000 psi @ 18.4 in^3/sec 48.5 in^3/sec @ 15,200 psi 23,200 psi @ 24.5 in^3/sec 64.6 in^3/sec @ 11, psi 17,000 psi @ 36.9 in^3/sec 87.9 in^3/sec @ 8,400 psi bar cm^3/sec 2,069 bar @ 302 cm^3/sec 795 cm^3/sec @ 1,048 bar 1,600 bar @ 401 cm^3/sec 1,059 cm^3/sec @ 789 bar Max Injection Speed in/sec 14.75 14.75 14.75 mm/sec 375 375 375 1,172 bar @ 605 cm^3/sec 1, cm^3/sec @ 580 bar Max Pack Pressure psi 30,000 23,200 17,000 bar 2,069 1,600 1,172 Max Pull Back Force lbf 25,000 25,000 25,000 N 111,205 111,205 111,205 Plunger Stroke in 40.75 40.75 40.75 mm 1,035 1,035 1,035 Plunger Diameter in 2.04 2.36 2.76 mm 52 60 70 Extruder L/d Ratio - 70mm 30 Extruder RPM - Low Torque rpm 265 Extruder RPM - High Torque rpm 265 No. of Pyrometers (barrel/nozzle) 10/1 Total Heat Capacity kw 65.26 Sled Pull in Force ton 4.1 tonf 3.7 Tonnage ton tonf 400 Ejector Stroke in 7.87 mm 200 Max Ejector Force** ton 13 tonf 11.8 Max Eject Speed** in/sec 10.4 mm/sec 265 Machine Specifications*** Length, see note in 336 mm 8,535 Width in 83.6 mm 2,123 Height in 97.6 mm 2,479 Centerline Height in 60.9 mm 1,548 Shipping Weight (machine) lb 53,200 kg 24,131 Electrical Specifications**** 104 *Note: Other capacities available. Please Consult Factory. **Note: Higher eject force and speed available. Please Consult Factory. ***Note: All machine dimensions and specifications are subject to change. Values are for reference only. 6 gpm @ 50psi
I44 Frame 50/54/66-70mm Injection Unit Specifications A B C A B C Injection Capacity, Max GPPS* oz 50 54 66 gm 1,418 1,531 1,871 Theoretical Disp in^3 90.7 100.1 122.3 cm^3 1,486 1,640 2,004 Max Pressure @ Rate Max Rate @ Pressure 30,000 psi @ 34 in^3/sec 68 in^3/sec @ 22,026 psi 27,500 psi @ 38 in^3/sec 76 in^3/sec @ 20,191 psi 23,200 psi @ 45 in^3/sec 90 in^3/sec @ 16,966 psi 2,069 bar @ 557 cm^3/sec 1,113 cm^3/sec @ 1,519 bar 1,897 bar @ 622 cm^3/sec 1,245 cm^3/sec @ 1,392 bar Max Injection Speed in/sec 20.5 20.5 20.5 mm/sec 521 521 521 1,600 bar @ 737 cm^3/sec 1,474 cm^3/sec @ 1,170 bar Max Pack Pressure psi 27,500 23,200 17,000 bar 1,897 1,600 1,172 Max Pull Back Force lbf 22,000 22,000 22,000 N 97,860 97,860 97,860 Plunger Stroke in 27.56 27.56 27.56 mm 700 700 700 Plunger Diameter in 2.05 2.17 2.36 mm 52 55 60 Extruder L/d Ratio - 70mm 30:1 Extruder Performance - 70mm rpm 265 No. of Pyrometers (barrel/nozzle) 10/1 Total Heat Capacity kw 47.3 Sled Pull in Force ton 4.1 tonf 3.7 Tonnage ton tonf 400 Ejector Stroke in 7.87 mm 200 Max Ejector Force** ton 13 tonf 11.8 Max Eject Speed** in/sec 10.4 mm/sec 265 Machine Specifications**** Length, see note in 336 mm 8,535 Width in 83.6 mm 2,123 Height in 97.6 mm 2,479 Centerline Height in 60.9 mm 1,548 Shipping Weight (machine) lb 53,200 kg 24,131 Electrical Specifications**** 104 *Note: 90 oz shot size with 16,500 psi C barrel is also available on this injection unit frame. **Note: Increased eject speed and force options available (consult factory) ***Note: 120mm extruder also available. Please Consult Factory for details. ****Note: All machine dimensions and specifications are subject to change. Values are for reference only. 6 gpm @ 50psi
I78 Hybrid Frame 38/44/50 70mm Injection Unit Specifications A B C A B C Injection Capacity, Max GPPS oz 38 44 50 gm 1,077 1,247 1,417 Theoretical Disp in^3 68.9 80.1 91.5 cm^3 1,129 1,313 1,500 Max Pressure psi 34,800 30,000 27,500 bar 2,400 2,069 1,897 Max Rate in^3/sec 153 175 200 cm^3/sec 2,500 2,868 3,278 Max Injection Speed in/sec 30 30 30 mm/sec 762 762 762 Max Pack Pressure psi 27,840 24,000 22,000 bar 1,920 1,655 1,518 Max Pull Back Force lbf 22,000 22,000 22,000 N 97,860 97,860 97,860 Plunger Stroke in 13.39 13.39 13.39 mm 340 340 340 Plunger Diameter in 2.56 2.76 2.95 mm 65 70 75 Extruder L/d Ratio - 70mm* 30 Extruder RPM - Low Torque rpm 265 No. of Pyrometers (barrel/nozzle) 11/1 Total Heat Capacity kw 73.4 Sled Pull in Force ton 12 tonf 10.8 Tonnage ton tonf 400 Ejector Stroke in 6.5 mm 165 Max Ejector Force (hyd std) ** ton 13 tonf 11.8 Max Eject Speed** in/sec 20 mm/sec 510 Machine Specifications*** Length, see note in 394.3 mm 10,014 Width in 84.2 mm 2,138 Height in 97.6 mm 2,479 Centerline Height in 60.9 mm 1,548 Shipping Weight (machine) lb 53,200 kg 24,131 Shipping Weight (power unit) lb 3,800 kg 1,724 Electrical Specifications*** 143 *Note: 120mm 25:1 L/d extruder also available (consult factory) **Note: Higher eject force and speed available (consult factory) ***Note: All machine dimensions and specifications are subject to change. Values are for reference only. 15 gpm @ 85 F
Templates Top View 410 [16.1] INSIDE 330 [13.0] STAT PLATEN THICKNESS 8712 [343.0] 2862 [112.7] FEEDTHROAT 705 [27.8] 2944 [115.9] REF 2035 [80.1] 1179 [46.4] OUTSIDE 857 [33] OUTSIDE 1050 [41.3] INSIDE 728 [28.6] INSIDE 131 [5.2] INSIDE 840 [33.1] BETWEEN RODS 135 1615 [5.3] [63.6] STRAIN CONTROL ROD SWIVEL R750 [29.5] R1261 [49.6] 631 [24.8] FEEDTHROAT 1088 [42.8] 1962 [77.3] ELECTRICAL CABINET DOOR SWIVEL 997 [39.3] 4294.8 [169.09] 4001 [157.5] END OF INJECTION BASE 2529 [99.6] FOR EXTRUDER SCREW REMOVAL 5018.6 [197.58] CLAMP SHIPPING LENGTH 1400 GATE STROKE 675 [26.6] CLAMP STROKE 364 [14.3] 750 [29.5] MAX MOLD 250 [9.8] MIN MOLD 5077 [199.9] 2616 [103.0] 2555 [100.6] 2421 [95.3] 2168 [85.4] 1608 [63.3] 879 [34.6] 840 [33.1] BETWEEN RODS 514 [20.2] PART DROP W/O GUARD 351 [13.8] 508 [20.0] PULL-IN STROKE 660 [26.0] MAX TRAVEL 1076 [42.4] 2561 [100.8] 1743 [68.6] FEEDTHROAT HEIGHT [60 ± 6] [2.4 ± 0.2] 886 [34.9] 1188 [46.8] PART DROP TOP OF LOWER STRAIN ROD 9371.7 [368.96] OVERALL LENGTH INCLUDING SLED TRAVEL 1324 [52.1] C.L. OF CONTROL SCREEN Front View
Templates 2308 [ 90.9 ] 232 [ 9.1 ] INJ GUARDS 78 [ 3.1 ] GATE HANDLE 39 [ 1.5 ] 2163 [ 85.1 ] TOP OF STRAIN ROD 616 [ 24.2 ] PART DROP 841 [ 33.1 ] PART DROP 1630 [ 64.2 ] Clamp End Injection End 145.0 [ 5.71 ] 305.0 104.0 [ 4.09 ] 349.3 254.0 -INCH- 0.750-10 UNC-2B, 1.44 DP (12X) SPI ROBOT MOUNTING HOLES PATTERN #5 100.0 [ 3.94 ] 69.0 [ 2.72 ] 840.0 BETWEEN RODS 767.7 254.0 349.3 398.5 TO PLATEN FOOT M10-6H (PITCH=1.50 REF), 18.0 DEEP (4) PLACES FEEDTHROAT SCALE 0.333 165.5 25.4 127.0 Feed Throat Robot Mounting 228.6 Feed throat dimensions can change based on injection frame. Consult factory for specific details.
50.8 Templates 1175.0 975.0 355.6 203.0 88.9 76.0 "B" MOVING PLATEN "C" MOVING PLATEN 355.5 "D" MOVING PLATEN 203.2 88.9 1151.0 975.0 76.2 51.0 127.0 177.8 254.0 330.2 431.8 533.4 VIEW OF MOVING PLATEN FACE SCALE 0.200 127.0 177.8 254.0 330.2 431.8 533.4 "A" MOVING AND STATIONARY PLATEN HOLE DESCRIPTION A Ø0.750-10 UNC-2B, 1.44 DP (108 X) EACH PLATEN B Ø27.0 THRU (12X) CORRESPONDING HOLES IN K/O BAR Ø0.562, THRU C Ø27.0 THRU (1x) CORRESPONDING HOLE IN K/O BAR Ø0.500-13 UNC-2B, THRU D Ø52.4 THRU (8X) CORRESPONDING HOLES IN K/O BAR Ø0.562, THRU Die Space 200.0 WORKING STROKE 288.0 TO K/O BAR FACE AT MAX EJECT STROKE 125 STANDARD ELECTRIC EJECT 1113.5 750.0 MAX MOLD 281.5 A 1009 88.3 ( 8.0 ) ( 6.0 ) 15.0 NOZZLE PENETRATION 602.5 ROBOT MOUNTING FACE 840.0 BETWEEN STRAIN RODS +0.05 101.60 0 DIE LOCATING RING I.D. 585.0 30.0 135.0 STRAIN ROD MOVING PLATEN A 176.3 STATIONARY PLATEN 675.0 CLAMP STROKE 500.0 MOLD HEIGHT ADJUSTMENT 250.0 MIN MOLD 1425.0 MAX DAYLIGHT SCALE 0.200 Platen Area