[davis] Versatile and reliably. Elegant relaxing is absolutely possible with this model! [davis] is suitable very well for pleasure-seekers thanks to the ergoslide + -function and the headrest adjustment. You can adjust the functions to the desired position by button pressure. The announcement here is feeling fine at the highest level! Design: Wilhelm Bolinth + ergoslide + Cover: Z79/23 mushroom + grid ergoslide + ergotouch headrest armpart seat height contrasting thread www.schillig.com castors casual
Sofas N65 sofa N75 large sofa N85 large sofa 180/110/79/45 200/110/79/45 220/110/79/45 Elements with armpart right Elements with armpart left N65R sofa with armpart N75R N85R N65L sofa with armpart N75L N85L 156/110/79/45 176/110/79/45 196/110/79/45 156/110/79/45 176/110/79/45 196/110/79/45 End elements right End elements left K75R one arm chaise K75L one arm chaise 99/183/79/45 KV1 headrest adj. = KVE1 99/183/79/45 KV1 headrest adj. = KVE1 All specified dimensions are approximate in width/depth/height/seat height. We would like to point out that deviations of +/- 2 cm may occur depending on the filling material used and its upholstering. Please contact us if you would like more detailed information. We reserve the right to make technical changes. 2
Ottomen Accessories G75 ottoman 75/64/45/0 item no. for castors = RO G150 extra large ottoman 150/64/45/0 item no. for castors = RO IMOL ergoslide + fct. motor. left seat for the sofas N... IMOR ergoslide + fct. motor. right seat for the sofas N... IMOB ergoslide + fct. motor. for the sofas N... right and left seat All specified dimensions are approximate in width/depth/height/seat height. We would like to point out that deviations of +/- 2 cm may occur depending on the filling material used and its upholstering. Please contact us if you would like more detailed information. We reserve the right to make technical changes. 3
ergoslide + motorised The sofas can be equipped with the ergoslide + function by sensor touch buttons. ergoslide + is only available together with the motorised headrest function. Flexible headrest Every item can be equipped with a notch headreast function for upcharge (item no. KV1, KV2, KV3). The function is also available by motor for upcharge (item no. KVE1, KVE2; except on EG 75R/L). Castors for ottomen The ottomen can be equipped with castors for upcharge. Two of the castors can be fixed. Thus a comfortable, big couch surface arises. Leg and seat heights The model is available in different seat and back heights according to the different leg heights. The leg design has to be indicated. Order information Order checklist Load-bearing capacity of the function: There is a maximum load-bearing capacity of the legrest up to 30 kg guaranteed for the ergoslide + function. Positioning diagram: Please send us a positioning diagram, depending on the many different variations available. We have marked the connecting sides in red for some elements in the type guide. Connecting sides: For an upcharge, the connecting sides can be supplied in the original cover instead of stretch fabric. Back sides of sofas: All pieces are genuinely upholstered at the back. Seam appearance: Decorative, felled or double seams may appear different in fabric and leather versions. For manufacturing reasons, seams may be left out of the fabric version or replaced with simple seams. Contrasting thread: In some leather colours, this model can be supplied with a contrasting coloured thread, at no upcharge. The colours as given can be found on the main sheet of each leather quality in the fabric/leather wagon. Please always specify the contrasting thread number or tonal colours will be supplied. Recommendation: We recommend the tables from the model range 40024 as an accessory. As storage place onto the ottomen we recommend a roll mat fom model range 10006. All of the dimensions given are approximate. dimensions in cm. We reserve the right to make changes. Dimensions are given as follows: width/depth/height/seat height and refer to the leg height ca. 12 cm. The depth measures contain protruding of the overlapping headrest, if the headrest is folded backwards. Seat depth: ca. 55 cm Recommended minimum wall clearance: ca. 15 cm Seat height: ca. 45 cm/47 cm Armpart width: ca. 24 cm Armpart height: ca. 56 cm Height with function: ca. 108 cm Functions and accessories (per seat): Upcharge: ergoslide + function by motor (per seat) ergoslide + function: By activating the ergoslide + -function, the seat comes forward some centimeters and the seat enlargenes. Afterwards the footrest comes up and the back lowers together with the seat ergonomically. ergoslide + is a combination of the ergoslide function and the seat depth adjustment with a longer footrest. You can choose, in which seat the function should be assembled - the right, the left or both of the seats. The adjustment of the ergoslide + function by motor is an invisible touch button between armpart and seat cushion. The ergoslide + function is not available for the one arm chaises and corner sofas for technical reasons. Upcharge: manually flexible head rest, item no. KV1, KV2, KV3 Upcharge: flexible headrest by motor, item no. KVE1, KVE2 The motorised headrest adjustment is available together with the ergoslide + function, only. Please note: If you are choosing the ergoslide + function, you have to order the headrest adjustment additionally for getting a higher level seating comfort. ergoslide + without headrest function is not possible. Sofas without ergoslide + function and only with electronically headrest adjustment are not available. Except the one arm chaises: the electronically headrest adjustment is also available without ergoslide +. Also seats without ergoslide + function can be equipped with the headrest function by motor on condition that one seat is equipped with the ergoslide + function or it is a one arm chaise. The adjustment of the electronically headrest adjustment is an invisible touch button between seat and armpart. For technical reasons the headrest adjustment cannot be ordered for single seats. At sofas both of the backs get equipped with it. Especially loose-fitting upholstery: The upholstery of this model has intentionally been made loosely to create a certain visual effect. The especially loose-fitting upholstery is characterized by an extremely soft surface. When being delivered, the cover shows a distinctive wave formation, which design- and constructionwise is being desired and can get more by usage. It is not a quality defect but a model-specific characteristic. Structure and cover Leg design/-height ergoslide + function by motor (Aufpreis) Manually headrest adj. Headrest adjustment/motor Ottomen/panel for ottomen (order information) Castors for ottomen Contrasting thread Positioning diagram 4
Upholstered furniture frame structure 1. Frame - main frame/ back frame: beewoch wood structure; Incliner function frame: metal construction 2. Seat suspension with permanently elastic wave springs 3. Seat upholstery structure of ergo-pur-foam with diolen cover 4. Back suspension with upholstery strap 5. Back upholstery structure of ergopur-foam with diolen cover The design of the cross section shown here does not correspond to the model on this page of the catalogue. Upholstered furniture made with passion. Your model is the product of German design and engineering. Over 65 years experience of technical skill, trend-setting ideas, attractive design and know-how from Germany. The result is upholstered furniture that guarantees first class comfort and attention to detail. We keep sustainability and protection of resources in mind when choosing the materials we use. H19900003 Controlled Quality Guaranteed Safety Healthy Living KLIMAPAKT für die Möbelindustrie Climate Pact for the furniture industry Hersteller-Nr. / manufacturer-no. Prüfnummer / control number Nach den Richtlinien für den Klimaschutz der Deutschen Gütegemeinschaft Möbel According to the guidelines for climate protection of the DGM www.dgm-klimapakt.de The RAL quality mark for furniture stands for the certain knowledge that this is a non-hazardous piece of furniture of reliably high quality and with an attractive design. The Deutsche Gütegemeinschaft Möbel makes sure of this with numerous tests. Inspections also safeguard the testing system. In-house manufacture conforming to the specs of the quality management system in line with ISO 9001, to safeguard int. processes. Last update 06/2018. The highest European accolade for systematic, in-house, environmental management. Improvement of environmental protection services. Climate pact with the DGM from sense of responsibility compared with the einvironment and climate goals of the Federal Government as well as the UN. Base is the CO2 balance of an enterprise. Legs ca. 12 cm/ seat height ca. 45 cm metal runner, gloss F 12 F 2M F 7P metal castor/ ottoman, upcharge F 6R Castors for ottomen: Every ottoman can be equipped with castors against upcharge. The item number is RO. Two of the castors can be fixed. Please note, that the castors are available in different heights. Leg and seat heights: Due to different leg heights, the model is available in different seat and total heights. The leg design has to be indicated. Runners: We assemble visibly matching legs instead of the runner under the corner elements. ca. 14 cm/ seat height ca. 47 cm metal runner, gloss metal castor/ ottoman, upcharge F 36 F 2R F 7Q F 7R www.schillig.com 5
davis - examples for living rooms corner combination N 75L laf - K 75R raf sofa combination N 75 - N 85 275x183 310x330 Cover: W77/49 taupe Cover: Z79/23 mushroom 6