-p-9 A_0_-p-9 A_0.qxd // : PM Page HAND WORK E0 E0 ø." ø.0" E00 ø.0" ø." ø0.9" ø.0" HES0 HES0
-p-9 A_0_-p-9 A_0.qxd // : PM Page -p HAND WORK SOLUTIONS Micro-Grinder Electrically Driven Emax EVOlution,000~0,000 min - (rpm) ULTRA-PRECISION BRUSHLESS MICRO-GRINDER Digital display enhances safety and efficiency. Compact and functional design makes the unit portable. Soft touch switches permit easy operation and long service life. 00,000~0,000 min - (rpm) ULTRA-PRECISION BRUSHLESS MICRO-GRINDER High output power, 00W, and high reliability are achieved by combining a hall-element brushless DC motor and high grade electronics. E0 E0 ø." ø.0" E00 ø.0" ø." ø0.9" ø.0" HES0 HES0 -p
-p-9 A_0_-p-9 A_0.qxd // : PM Page -p ULTRA-PRECISION BRUSHLESS MICRO-GRINDER Emax EVOlution Emax EVOlution System Chart Model Price Attachment RE00 IR-0 9.00 Ring Type E0 E0 ø." ø.0" E00 RE0 IH-00 9.00 IG-00.00 RE0 HG-00 9.00,000 min - (rpm) Max. ( ) RE0 BMH-00 9.00,000 min - (rpm) Max. ( ) Lever Type Straight Type Torque Type ( ) Long Type LUSTER (Reciprocating motion) Built-in Motor NLS-0,00.00 0,000 min - (rpm) Max. ( ) Wide selection of attachments available depending on the application. RE0 MFC-00S.00,000 min - (rpm) Max. ( ) 90 Mini Angle Type Speed Reducer Extension Joint ø.0" ø." ø0.9" ø.0" HES0 HES0 RE0 MFC-00M.00,000 min - (rpm) Max. ( ) RE0 IC-00.00,000 min - (rpm) Max. ( ) 0,000 min- (rpm) Max. ( ) RE0 KC-00.00,000 min - (rpm) Max. ( ) 0,000 min- (rpm) Max. ( ) 90 Mini Angle Type (Very Small Head) 90 Angle Type Angle Type Extension Joint RE00 CN-0.00,000 min - (rpm) Max. ( ) / Speed Reducer RO0 RG-0.00 0,000 min - (rpm) Max. ( ) LS0 LS-00.00 0,000 min - (rpm) Max. ( ) LUSTER (Reciprocating motion) / Speed Reducer RO0 RG-0.00 0,000 min - (rpm) Max. ( ) May be connected between the motor and the attachment as required for increased torque. LS0 ML- 0.00,000 min - (rpm) Max. ( ) 0,000 (rpm) Max. ( ) min- LS0 SLS- 0.00,000 min - (rpm) Max. ( ) MINI-LUSTER (Reciprocating motion) SWING-LUSTER (Right to Left motion) RE00 HA-00 9.00 0,000 min - (rpm) Max. ( ),000 min- (rpm) Max. ( ) Hammer Action Type KBS0 KBS-0 9.00,000 min - (rpm) Max. ( ) FINE BELT SANDER -p : Maximum Allowable Speed, intermittent use. : Maximum Allowable Speed, continuous use. Maximum Allowable Speed, continuous use may change depending on the material being cut and other application variables. :Use mm torque Type HG-00 to connect ENK-0T
-p-9 A_0_-p-9 A_0.qxd // : PM Page -p Motor Control Unit Model Price Model Price Standard Type Motor with Cord,000~0,000 min - (rpm) 0 ENK-0S 0.00 Torque Type Motor with Cord,000~,000 min - (rpm) 0 ENK-0T.00 (0V) NE9 0.00 E0 E0 ø." ø.0" E00 ø.0" ø." ø0.9" ø.0" HES0 HES0 Order by catalog number. -p
-p-9 A_0_-p-9 A_0.qxd // : PM Page -p Emax EVOlution FEATURES Digital display enhances safety and efficiency. Compact and functional design makes the unit portable. Soft touch switches permit easy operation and long service life. New Advanced Design Control Unit E0 E0 ø." ø.0" E00 ø.0" ø." ø0.9" ø.0" HES0 Advanced Control Function Upgraded Digital Display. EVOLUTION Speed Control with Flash Load Indicator. Advanced User Friendly Design New Industrial Design. EVOLUTION new user friendly case meets design and performance requirements. Motor speed digital display Load Meter : Continuous load area : Intermittent load area : Overload Diversity for work efficiency Motors A and B can be connected to cover multiple work requirements. Simultaus motor operation is not allowable Memory Speed Function FiXpeed An exclusive new feature of the Emax EVOlution is the FiXpeed system allowing independent foot switch operation for the A and B Motors. A Motor foot switch can be on/off and B Motor foot switch can be variable speed. This function brings unprecedented versatility and workability. Auto Cruise Function The control unit is equipped with an Auto Cruise Function. While using foot control for work, anyone could fix the motor at any speed by the embedded motor switch. Once speed is set, foot pedal control is not required. This function eliminates foot fatigue during operation. HES0 Forward / Reverse Select Switch Forward/Reverse rotation can be selected. ø." Speed Control Volume Emax EVOlution Control Unit Easy to operate by one finger Model (0V) NE9 0 Specifications Weight : lb.. oz. Power Source : AC0V, 0-0Hz Dimensions : W." x D0.0" x H." Price.00 Motor A ON/OFF Function Motor B ON/OFF Function Memory Speed Function FiXpeed Accessories : Handpiece Holder : pc., Handpiece Stand : pc. Power Supply Cord : pc. -p
-p-9 A_0_-p-9 A_0.qxd // : PM Page -p Ultra-Precision Micro-Grinder NAKANISHI Smart Switch The switch provides a click sensation. A confirmation tone is reacted by the control unit when the switch is operated. The motor type is distinguishable by the switch color. One Touch Tool Changing Ring Type (IR-0) Easy twist open/close chuck Various Collet Size Various sizes ranging from ultra-small diameter (0. mm) are available for each attachment. Furthermore, collet replacement can be easily performed without wrench. Special Dust Protection Mechanism (patented) The chuck section of Emax EVOlution has a special built-in dust protection mechanism that prevents entry of foreign materials such as chips, and provides superior durability as well. Emax EVOlution vs E-max Torque Characteristic N { /min - (rpm) } 0000 0000 0000 0000 0000 E-max-T E-max-S EVO-S Provides choice of various applications. Standard Type Motor,000~0,000 min - (rpm) (ENK-0S) Blue Torque Type Motor,000~,000 min - (rpm) (ENK-0T) Green Exclusive use for Emax EVOlution Types of Motors Emax EVOlution and Electer E-max have different motor cord pin configurations. Excellent Durability High performance brushless motor eliminates the need of changing carbon brushes. RPM variation is minimal even when load changes. Allowing difficult and stable cutting in stress free motion. Suitable performance for finish grinding. Provides superior quietness and smoothness from low speed to high speed. Types of Attachments for All Types of Applications Capable of infinite applications with different handpieces and types of intermediate attachments. Interchangeable with attachments form the E-max and system. EVO-T Emax EVOlution EVO-S (Standard) EVO-T (Torque) E-max-S (Standard) E-max-T (Torque) Electer E-max ø.0" ø." E0 E0 ø." ø.0" E00 ø0.9" ø.0" HES0 HES0 T (N cm) Order by catalog number. -p
-p-9 A_0_-p-9 A_0.qxd // : PM Page -p Emax EVOlution STANDARD SET RING TYPE STANDARD SET Capabilities for a wide variety of applications. Excellent balance and motor power for smooth speed and handling.,000~0,000 min - (rpm) New Ring Type IR-0 is the standard attachment for Emax EVOlution standard set EV0-IR E0 E0 ø." ø.0" E00 (0V) Model EV0-IR Price,09.00 Standard Equipment Attachment IR-0 Micro Grinder (IR-0+ENK-0S) : pc. Collet ø/" (CHH-.), ø. mm (CHH-.) : pc. each Control Unit (NE9 0) : pc. Handpiece Holder : pc. Handpiece Stand : pc. Power Supply Cord : pc. Wrench ( x.) : pc. Pin Wrench (K-) : pc. L Shaped Wrench : pc. Motor ENK-0S ø.0" ø." ø0.9" ø.0" HES0 RING TYPE TORQUE SET For heavy duty and larger tools, Torque type promises to extend operation ranges. HES0,000~,000 min - (rpm) New Ring Type IR-0 is the standard attachment for Emax EVOlution torque set EV0-IR (0V) Model EV0-IR Price,09.00 Standard Equipment Attachment IR-0 Micro Grinder (IR-0+ENK-0T) : pc. Collet ø/" (CHH-.), ø. mm (CHH-.) : pc. each Control Unit (NE9 0) : pc. Handpiece Holder : pc. Handpiece Stand : pc. Power Supply Cord : pc. Wrench ( x.) : pc. Pin Wrench (K-) : pc. L Shaped Wrench : pc. Motor ENK-0T -p
-p-9 A_0_-p-9 A_0.qxd // : PM Page -p Emax EVOlution MOTOR Motor for durability. 0 0 (Electrically Driven) NAKANISHI Smart Switch. High performance samarium cobalt magnet. High accuracy, lightweight, compact, high reliability and superior Major reduction of RF noise. Provides extremely quiet operation from low to high speed with stepless speed adjustment. Motor Specifications ø0.9" Motor Model Speed Weight (w/o Cord) Max. Torque Output Power ENK-0S ENK-0T,000~0,000 min - (rpm),000~,000 min - (rpm). oz..9 oz.. cn m. cn m W W STANDARD TYPE MOTOR ENK-0S." Switch color : Blue TORQUE TYPE MOTOR ENK-0T,000~0,000 min - (rpm) Excellent combination of high speed, lightweight, small diameter and high torque. This lightweight and compact general-use type is perfect for precision work. Model Standard Accessories Price 0 Emax EVOlution TORQUE CHARACTERISTIC GRAPH Speed { x 0 min-(rpm) } 0..0..0..0..0..0. Torque (cn m) Standard Motor (ENK-0S) Torque Motor (ENK-0T) ENK-0S Straight Cord :. ft 0.00 ø.0" ø." E0 E0 ø." ø.0" E00 ø0.9" ø.0" HES0 HES0 ø."." Switch color : Green,000~,000 min - (rpm) Combines the best of both high speed and high torque. It is perfect for applications requiring large burs. Model Standard Accessories Price 0 ENK-0T Straight Cord :. ft.00 Order by catalog number. -p
-p-9 A_0_-p-9 A_0.qxd // : PM Page -p Emax EVOlution ATTACHMENTS RE00 ø0." Ring Type Attachment Model Standard Accessories Price RE00 RING TYPE ATTACHMENT IR-0 IR-0." Perfectly designed for powerful and delicate cutting and grinding, and made slim and light weight for comfortable gripping. Weight :. oz. Simple, no wrench bur replacement. Wrench is not required to exchange the chuck. Collet Standard Size : ø/" (CHH-.), ø. mm (CHH-.) Optional Collets : CHH-[][] are shown in page (-p) Collet ø/" (CHH-.), ø. mm (CHH-.) : pc. each Wrench ( x.) : pc. Pin Wrench (K-) : pc. L Shaped Wrench : pc. 9.00 E0 E0 ø." ø.0" E00 ø.0" ø." ø0.9" ø.0" HES0 HES0 RE0 ø0." Lever Type Attachment Model Standard Accessories Price RE0 0." LEVER TYPE ATTACHMENT IH-00 IH-00 Straight Type Attachment." Perfectly designed for powerful and delicate cutting and grinding, and made slim and light weight for comfortable gripping. Weight :.9 oz. Just turn the lever to exchange the bur. Wrench is not required to exchange the chuck. Collet Standard Size : ø/" (CHH-.), ø. mm (CHH-.) Optional Collets : CHH-[][] are shown in page (-p) Collet ø/" (CHH-.), ø. mm (CHH-.) : pc. each Wrench ( x.) : pc. Pin Wrench (K-) : pc. 9.00 Model Standard Accessories Price IG-00 STRAIGHT TYPE ATTACHMENT IG-00." Collet ø/" (NKM-.) : pc Collet Nut (CHN-) : pc. Wrench (9 x 9), ( x ) : pc. each Bar Wrench (PCR-0) : pc. Light weight ergonomically designed with minimal vibration for extended use. High precision NK Micron Collet for maximum tool retention. Weight :.9 oz. Collet Standard Size : ø/" (NKM-.) Optional Collets : NKM-[][] are shown in page (-p).00 -p
-p-9 A_0_-p-9 A_0.qxd // : PM Page -p9 Emax EVOlution ATTACHMENTS RE0 TORQUE TYPE ATTACHMENT HG-00 The resistance produced by cutting and grinding is absorbed by a special rubber grip to eliminate slipping. Chuck is tightened by a Wrench. Weight :. oz. Collet Standard Size : ø/" (CHG-.) Optional Collets : CHG-[][] are shown in page (-p) Torque Type Attachment Use mm torque Type HG-00 to connect ENK-0T Model Standard Accessories Price ø0." RE0 0." RE0 HG-00.0" Collet ø/" (CHG-.) : pc. Wrench (0 x 0) : pc. Bar Wrench (K-) : pc. Pin Wrench (K-) : pc. 9.00 For Chamfering Deep Hole 90ºMINI ANGLE TYPE ATTACHMENT MFC-00S 90º MINI ANGLE TYPE Attachment for Chamfering Deep Hole, Bur Only ø. mm ø0." RE0.".",000 min - (rpm) Max. ( ) Ideal for chamfering and deburring the inside of slit pipe. Minimum Inner Diameter : Weight :. oz. Standard Collet : ø. mm (K-) Speed Reduction Ratio : 0/ Model Standard Accessories Price RE0 0." RE0 ø0.",000 min - (rpm) Max. ( ) For Deep Hole Grinding LONG ATTACHMENT BMH-00." MFC-00S For Chamfering Deep Hole 90ºMINI ANGLE TYPE ATTACHMENT MFC-00M.".",000 min - (rpm) Max. ( ) This unique slim body makes it ideal for cutting and grinding the bottom surface of deep ribs or holes. Weight :.0 oz. Wrench is not required to exchange the chuck.." Collet Standard Size : ø/" (CHM-.),000 min - (rpm) Max. ( ) Optional Collets : CHM-[][] are shown in page (-p) Long Attachment for Deep Hole Grinding Model Standard Accessories Price RE0 BMH-00 Collet ø/" (CHM-.) : pc. Wrench ( x.), ( x.) : pc. each Pin Wrench (K-) : pc. 9.00 Collet ø. mm (K-) : pc. Chuck Wrench (K-) : pc. Pin Wrench (K-) : pc..00 The smallest 90 Angle type head is suitable for chamfering and deburring the inside of the slit pipe. Minimum Inner Diameter : ø0." Weight :. oz. Standard Collet : ø. mm (K-) Speed Reduction Ratio : 0/ ø.0" ø." E0 E0 ø." ø.0" E00 ø0.9" ø.0" HES0 HES0 90º MINI ANGLE TYPE Attachment for Chamfering Deep Hole, Bur Only ø. mm (Very Small Head) Model Standard Accessories Price RE0 MFC-00M Collet ø. mm (K-) : pc. Chuck Wrench (K-) : pc. Pin Wrench (K-) : pc..00 Maximum Allowable Speed, continuous use may change depending on the material being cut and other application variables. : Maximum Allowable Speed, intermittent use. : Maximum Allowable Speed, continuous use. Order by catalog number. -p9
-p-9 A_0_-p-9 A_0.qxd // : PM Page -p0 Emax EVOlution ATTACHMENTS & ACCESSORIES ø.0" ø." E0 E0 ø." ø.0" E00 ø0.9" ø.0" HES0 HES0 RE0 0.0" 90 ANGLE ATTACHMENT IC-00 ø0.0"." 90 Angle attachment with ø/" (ø. mm) Collet. Most suitable for polishing flat surfaces, corners and internal surfaces of pipes with paper disk mounted on rubber pad. Reduction Ratio : / Weight :.9 oz. Collet Standard Size : ø/" (CHC-.) Optional Collets : CHC-[][] are shown in page (-p) RE0 0.9",000 min - (rpm) Max. ( ) 0,000 min - (rpm) Max. ( ) Standard Accessories for IC-00 and KC-00 90º Angle Attachment Model Standard Accessories Price RE0 IC-00 ANGLE ATTACHMENT KC-00 ø0.0"." Ideal for the work at angle, especially corners and deep concaves. Use the motor in reverse rotation for clockwise rotation. Speed Reduction Ratio : / Weight :.9 oz. Collet Standard Size : ø/" (CHC-.) Optional Collets : CHC-[][] are shown in page (-p),000 min - (rpm) Max. ( ) 0,000 min - (rpm) Max. ( ) º Angle Attachment Drive Motor & Control Unit Electric Motor (ENK-0S, ENK-0T) For the details of above micromotor, refer to the following page (-p) Collet ø/" (CHC-.) : pc. Standard Accessories : set Chuck Wrench (K-) : pc. Pin Wrench (K-) : pc. Emax EVOlution Control Unit (NE9 0) Drive Motor & Control Unit For the details of above micromotor, refer to the following page (-p).00 Model Standard Accessories Price RE0 KC-00 Electric Motor (ENK-0S, ENK-0T) Collet ø/" (CHC-.) : pc. Standard Accessories : set Chuck Wrench (K-) : pc. Pin Wrench (K-) : pc. Emax EVOlution Control Unit (NE9 0).00 Description Model O.D. Grits Q'ty (Small) RE9 ø 0mm (ø 0.9") _ Rubber Pad (Med) RE9 ø 0mm (ø 0.9") _ (Large) RE9 ø 0mm (ø.") _ LS090 S-0 ø mm (ø 0.") # 0 LS090 S-00 ø mm (ø 0.") # 00 Sandpaper Disk RE0 M-0 ø mm (ø 0.") # 0 RE0 M-00 ø mm (ø 0.") # 00 RE90 L-0 ø mm (ø.") # 0 RE90 L-00 ø mm (ø.") # 00 -p0 Maximum Allowable Speed, continuous use may change depending on the material being cut and other application variables. : Maximum Allowable Speed, intermittent use. : Maximum Allowable Speed, continuous use.
-p-9 A_0_-p-9 A_0.qxd // : PM Page -p Emax EVOlution ACCESSORIES Optional Accessories for IC-00 and KC-00 Rubber Pad Product Description Model O.D. Grits package Price Rubber Pad (Small) Rubber Pad (Med) Rubber Pad (Large) RE9 ø0 mm (ø0.9") _ pc./pack.00 RE9 ø0 mm () _ pc./pack.00 RE9 ø0 mm (ø.") _ pc./pack.00 E0 E0 ø." ø.0" E00 ø.0" ø." Sandpaper Disk (Paper Type for Metals, Adhesive Back) Product Description Model O.D. Grits package Price LS0900 S-00 # 0 LS090 S-0 # 0 LS090 S-0 # 0 LS090 S-0 # 0 Sandpaper Disk LS090 S-0 # 0 ø mm (ø0.") for small pad LS090 S-00 # 00.00 LS090 S-00 # 00 LS09 S-00 # 00 LS09 S-00 #,000 LS09 S-0 #,00 RE00 M-00 # 0 RE0 M-0 # 0 RE0 M-0 # 0 RE0 M-0 # 0 Sandpaper Disk RE0 M-0 # 0 00 ø mm (ø0.") for med. pad RE0 M-00 # 00 pcs./pack.00 RE0 M-00 # 00 RE M-00 # 00 RE M-00 #,000 RE M-0 #,00 RE900 L-00 # 0 RE90 L-0 # 0 RE90 L-0 # 0 RE90 L-0 # 0 Sandpaper Disk RE90 L-0 # 0 ø mm (ø.") for large pad RE90 L-00 # 00.00 RE90 L-00 # 00 RE9 L-00 # 00 RE9 RE9 L-00 L-0 #,000 #,00 ø0.9" ø.0" HES0 HES0 Order by catalog number. -p
-p-9 A_0_-p-9 A_0.qxd // : PM Page -p Emax EVOlution ATTACHMENTS The Features of LUSTER.9" NLS-0 (Built-in Motor) Stroke Range : 0~ mm adjustable by stroke cam E0 E0 ø." ø.0" E00 ø.0" ø." NAKANISHI Smart Switch High Power LUSTER (NLS-0) is a powerful reciprocating stroke polisher equipped with / Speed Reducer to multiply the torque by times. Designed with comfortable rubber-grip Well balanced, rubber-grip absorbs vibration from reciprocating strokes reducing fatigue and allowing long, continuous operation. ø.0" Reciprocating Stroke : 0~,00 times/min. Fully adjustable. Ultra-Precision Grinder All important parts are hardened by heat treatment to provide excellent durability. The Features of LUSTER LS-00." The tilt angle of grindstone arbor is adjustable. The grinding surface can be set at any angle between 0 and 0 enabling grinding of bottom, right, left and top surfaces without moving the machine itself. Control Unit Emax EVOlution Control Unit (NE9 0) Weight : lb.. oz. Max. tool shank diameter ø0.", Screw clamp type. Various types of attachment tools are provided as standard accessories. Reciprocating Motion Polishing Finisher LUSTER Model Standard Accessories Price NLS-0 0,000 min - (rpm) Max. ( ) Standard Accessories : set Allen Wrench ( mm) : pc. Lubrication Oil Lubrication Nozzle for LUSTER,00.00 ø0.9" ø.0" HES0.9" Stroke Range : 0~ mm adjustable by stroke cam HES0 -p High Power LUSTER (LS-00) is a powerful reciprocating stroke polisher. Reciprocating Stroke : 0~,00 times/min. Fully adjustable. Ultra-Precision Grinder All important parts are hardened by heat treatment to provide excellent durability. Designed with comfortable rubber-grip Well balanced, rubber-grip absorbs vibration from reciprocating strokes reducing fatigue and allowing long, continuous operation.."." The tilt angle of grindstone arbor is adjustable. The grinding surface can be set at any angle between 0 and 0 enabling grinding of bottom, right, left and top surfaces without moving the machine itself. For the details of above micromotor, refer to the following page (-p) Weight : lb..99 oz. Max. tool shank diameter ø0.", Screw clamp type. Various types of attachment tools are provided as standard accessories. Reciprocating Motion Miniature Polisher LUSTER Model Standard Accessories Price LS0 LS-00 0,000 min - (rpm) Max. ( ) Drive Motor & Control Unit Electric Motor (ENK-0S, ENK-0T) Standard Accessories : set Allen Wrench ( mm) : pc. Lubrication Oil Lubrication Nozzle for LUSTER Emax EVOlution Control Unit (NE9 0).00
-p-9 A_0_-p-9 A_0.qxd // : PM Page -p Emax EVOlution ATTACHMENTS The Features of MINI-LUSTER ML- ø0.9"." Drive Motor & Control Unit Reciprocating Stroke (variable) : Approx 0~9,000 times/min. Stroke Range (fixed) : 0. mm. Due to pencil type grip, it is most suitable for polishing narrow grooves, details, etc. Lightweight, compact design and minimal vibration keep the hand free from fatigue for long continuous operation. By using the grindstone holder provided, various tools such as oil stone, super stone, diamond files, etc. can be used. For the details of above micromotor, refer to the following page (-p) Pencil-Type Reciprocating Polishing Finisher MINI-LUSTER Attachment Model Stroke Range Standard Accessories Price LS0 ML- 0.mm Electric Motor (ENK-0S, ENK-0T) Weight :.9 oz. Max. tool shank diameter ø0.", Screw clamp type. Various attachment tools and holders are provided as standard accessories.,000 min - (rpm) Max. ( ) 0,000 min- (rpm) Max. ( ) Emax EVOlution Control Unit (NE9 0) Standard Accessories : set Allen Wrench (. mm) : pc. 0.00 E0 E0 ø." ø.0" E00 The Features of SWING-LUSTER SLS- ø0.9"." High speed grinding and polishing operations can be performed while maintaining the fine and delicate feeling of hand polishing. Lightweight pencil type design makes it easy to work in tight areas. Ergonomically designed to provide high sensitivity for precision work. Easily adjustable stroke length allows efficient work on minute areas or large sections. Weight :. oz. Reciprocating Stroke (variable) : 0~9,000 times/min Stroke range (variable) : 0~. mm Max. tool shank diameter ø0.0", Screw clamp type. Drive Motor & Control Unit For the details of above micromotor, refer to the following page (-p) Pencil-Type Reciprocating Polishing Finisher SWING-LUSTER Attachment Model Standard Accessories Price LS0 SLS-,000 min - (rpm) Max. ( ) Electric Motor (ENK-0S, ENK-0T) Emax EVOlution Control Unit (NE9 0) Standard Accessories : set Allen Wrench (. mm) : pc. 0.00 ø.0" ø." ø0.9" ø.0" HES0 HES0 Maximum Allowable Speed, continuous use may change depending on the material being cut and other application variables. : Maximum Allowable Speed, intermittent use. : Maximum Allowable Speed, continuous use. Order by catalog number. -p
-p-9 A_0_-p-9 A_0.qxd // : PM Page -p Emax EVOlution ACCESSORIES Tool and standard accessories for LUSTER, MINI-LUSTER, SWING-LUSTER Product Model Price (Package) Each product is provided with tool as standard. LUSTER NLS-0 LS-00 MINI-LUSTER ML- SWING-LUSTER SLS- E0 E0 ø." ø.0" E00 ø.0" ø." ø0.9" ø.0" HES0 HES0 Max. clampable size : 0." Thickness 0.0" x width 0." Max. clampable size : Thickness 0." x width 0." Max. clampable size : Thickness 0." x width 0." Illustration Usage 0.0" Max. clampable size : Thickness 0." x width 0.9" [] 0." [] [] [] [] 0.0"0."." 0.".9" 0."."." 0.9" 0.".".9".0" ø0." 0.9".".".0" ø0." ø0." 0." 0.0" ø0." ø0." ø0."." 0.9" Grindstone Holder Grindstone Holder VES Grindstone Holder VEA Tool Holder with Spring FVA Rectangular Pad LKE-A Rod for Rectangular Pad FBA- Angle Rod NGA Diamond Grindstone DLA x -00 Grindstone Holder Ceramic Fiber Grindstone (#,00) [] 0 LS0 LS0 LS0 LS09 LS0 LS0 LS09 9 0.00 ( pcs./pack).00 ( pc./pack).00 ( pc./pack).00 ( pc./pack).00 ( pc./pack).00 ( pc./pack).00 ( pc./pack).00 ( pc./pack).00 ( pcs./pack).00 ( pcs./pack) ( pc.) ( pc.) ( pc.) ( pc.) ( pc.) ( pc.) ( pc.) ( pc.) ( pc.) ( pc.) ( pc.) [] [] ( pc.) ( pc.) ( pc.) [] -p Order by catalog number.
-p-9 A_0_-p-9 A_0.qxd // : PM Page -p memo E0 E0 ø." ø.0" E00 ø.0" ø." ø0.9" ø.0" HES0 HES0 -p
-p-9 A_0_-p-9 A_0.qxd // : PM Page -p Emax EVOlution ATTACHMENTS The Features of HA-00." Drive Motor & Control Unit E0 ø0." Electric Motor (ENK-0S, ENK-0T) Emax EVOlution Control Unit (NE9 0) For the details of above micromotor, refer to the following page (-p) E0 ø." ø.0" E00 ø.0" ø." ø0.9" ø.0" HES0 Stroke speed : ~,000 strokes/min A wide variety of patterns can be produced by varying the spring pressure and hammer speed. Light weight, pencil type grip makes the handpiece very comfortable to hold and easy to use. Adjustable spring pressure. Self lubricating hammer mechanism ensure excellent durability. Weight :. oz. Stroke range : 0. mm Stroke Spring Pressure :.~.N (Ring Adjustment Type) The Features of FINE BELT SANDER KBS-0." Polishing a flat surface Engraving and Ornament Processing Work Hammer Attachment Model Standard Accessories Price RE00 HA-00 Wrench ( x.) : pc. Bar Wrench (K-) : pc. Oil and Oil offer machine Hammer Bit (For replacement) : pcs. 9.00 0,000 min - (rpm) Max. ( ),000 min- (rpm) Max. ( ) Hammer Bit to be machined to required shapes (SUS-0, heat treated, approx, HRC0) Product Package Price RE0 pcs./pack 0.00 Drive Motor & Control Unit HES0 Polishing a curved surface Belt runs Approx. 0~,00 ft/min mm, mm and mm width belts are available. The angle of the belt section is fully adjustable. Exchanging the belt is simply done by lever release. Weight :. oz. Light-weight, compact, minimal vibration and a small diameter grip design keep the hand free from fatigue for long, continuous operation. When polishing a curved surface, the tension between the front and central pulley can be utilized. When polishing a flat surface or a groove, use the flat part of belt. FINE BELT SANDER Attachment Electric Motor (ENK-0S, ENK-0T) Emax EVOlution Control Unit (NE9 0) For the details of above micromotor, refer to the following page (-p) Model Standard Accessories Price KBS0 KBS-0 mm Belt ( kinds pcs. each) mm Belt ( kinds pcs. each) mm Belt ( kinds pcs. each) Allen Wrench ( mm) : pc. 9.00,000 min - (rpm) Max. ( ) -p Maximum Allowable Speed, continuous use may change depending on the material being cut and other application variables. : Maximum Allowable Speed, intermittent use. : Maximum Allowable Speed, continuous use.
-p-9 A_0_-p-9 A_0.qxd // : PM Page -p Emax EVOlution ACCESSORIES Belt for FINE BELT SANDER (Ring Type) Product Description Grit Width (mm) Length (mm) Package Price (Package) 90 0 90 # # # 0 0 0 W Sand Belt Sand Belt for Wood Zirconia Diamond (Hard Type) Diamond (Soft Type) Felt 90 9 0 9 0 9 0 9 0 9 9 9 9 9 9 9 9 9 9 0 0 0 0 0 0 0 0 0 LS0 0 LS0 # 0 # 0 # 00 # 0 # 0 # 0 # 0 # 0 # 00 # 0 # 0 # 0 # 0 # 0 # 00 # 00 # 00 # 0 # 0 # 0 # 0 # 00 # 0 # 0 # 0 # 0 # 0 # 00 # 0 # 0 # 0 # 0 # 00 # 00 # 00 0 #,000 00 00 00 00 00 00 0 pcs./pack.00 0 pcs./pack pcs./pack pcs./pack pcs./pack pcs./pack.00 9.00.00.00.00 0 00 pcs./pack.00 ø.0" ø." E0 E0 ø." ø.0" E00 ø0.9" ø.0" HES0 HES0 Order by catalog number. -p
-p-9 A_0_-p-9 A_0.qxd // : PM Page -p Emax EVOlution SPEED REDUCER & ø0." RO0." SPEED REDUCER RG-0 TORQUE UP TIMES (/ Speed Reducer) The speed is reduced to / but the torque is multiplied by times. Weight :.0 oz. 0,000 min - (rpm) Max. ( ) ø0." RO0." The speed is reduced to / but the torque is multiplied by times. Weight :. oz. 0,000 min - (rpm) Max. ( ) SPEED REDUCER RG-0 TORQUE UP TIMES (/ Speed Reducer) E0 E0 ø." ø.0" E00 ø.0" ø." ø0.9" ø.0" HES0 HES0 Speed Reducer (/) Model Standard Accessories Price RO0 RG-0 Pin Wrench (K-) : pc..00 ø0." RE00.9" 0 EXTENSION JOINT CN-0 (Speed : ) FOOT PEDAL FC- Used as an ON/OFF switch as well as a variable speed control. Foot Pedal Model Fit to Price 0 FC- Emax EVOlution 99.00 Speed Reducer (/) Model Standard Accessories Price RO0 RG-0 Pin Wrench (K-) : pc..00 This is a joint to be connected between a motor and an attachment to extend the total length of the attachment. Weight :.9 oz.,000 min - (rpm) Max. ( ) Extension Joint (Speed : ) Model Standard Accessories Price RE00 CN-0 Pin Wrench (K-) : pc..00 -p Maximum Allowable Speed, continuous use may change depending on the material being cut and other application variables. : Maximum Allowable Speed, intermittent use. : Maximum Allowable Speed, continuous use.
-p-9 A_0_-p-9 A_0.qxd // : PM Page -p9 Emax EVOlution ACCESSORIES 0." 0." [] [] [] [] [] Common Tools for LUSTER, MINI-LUSTER." L 0." 0.0" 0." 0.9"." 0." Product Description Model Price 0.9"." 0.9"." L 0.9".0" 0." ø0." ø0." ø0." ø0." ø0." ø0." LS 0 0 9 LS 0 ZO 900 900 900 ZO 900 LS 0 LS 0 LS 0 LS 09 LS 0 Grindstone Holder VEA for (W 0." x T 0.") Grindstone Holder for (W 0." x T 0.0") Grindstone Holder for (W 0.9" x T 0.") Grindstone Holder VES for (W 0." x T 0.") Holder for Super Stone SH-0 (L=0.0") (L=.00") SH- (L=0.") (L=0.9") SH- (L=0.") (L=0.") Oil Stone Lapping Stick Holder for (W 0." x T 0.") Tool Holder with Spring FVA Angle Rod NGA Rod for Lapping FBA- Hinge (Diamond) DLC- x -00 Ball Joint LAA-A Use with SEV LS Ball Joint (with Diamond) ø0.9" DLD-0/0. []~[] : Please See Page -p for Illustration Usage. 0.0" 0."."." 0.".0"." 0." 0.0" ø0." ø0.9" LS LKE-A with Hinge Use with FBA- : Other than noted, prices are per piece. : Available while supply lasts. Check with NSK America..00.00.00.00.00.00.00.00.00.00.00.00.00 ø0.0" 0." 0." 0.9" 0." Product Description Model Price Sandpaper Disk 0." Sandpaper 0.9" 0." 0.9" 0.0" 0.0" 0." 0.0" Super Stone Super Stone.9" Super Stone ø0." 0.".9".9" LS0900 LS090 LS090 LS090 LS090 LS090 LS090 LS09 LS09 LS09 LS09 LS099 LS09 LS09 LS09 LS09 LS09 LS099 LS09 LS09 LS09 LS09 LS09 LS LS0 LS0 LS09 LS LS0 LS0 LS0 LS0 LS0 LS0 LS0 S-00 # 0 S-0 # 0 S-0 # 0 S-0 # 0 S-0 # 0 S-00 # 00 S-00 # 00 S-00 # 00 S-00 #,000 S-0 #,00 K-00 # 0 K-0 # 0 K-0 # 0 K-0 # 0 K-0 # 0 K-00 # 00 K-00 # 00 K-00 # 00 K-00 #,000 K-0 #,00 DLA--00 DLA x -00 DLA x -00 Black # 00 Blue # 00 White #,000 Red #,00 Black # 00 Blue # 00 White #,000 Red #,00 Black # 00 Blue # 00 White #,000 Red #,00 00 pcs. Package.00 00 pcs. Package.00.00.00 0.00.00.00.00.00.00.00 ø.0" ø." E0 E0 ø." ø.0" E00 ø0.9" ø.0" HES0 HES0 Order by catalog number. -p9
-p0- A_0_-p0- A_0.qxd /0/ : PM Page -p0 ULTRA-PRECISION BRUSHLESS MICRO-GRINDER 00 Evolutionary New Design High-Performance Brushless Micro Grinder. Ultra-Precision Micro-Grinder The Espert 00 brushless motor takes motor technology to an even higher level. The new state of the art motor has dramatically increased efficiency and torque output. The microprocessor based control unit provides optimal control of the motors and allows for increased flexibility in this multi-function system. E0 E0 ø." ø.0" E00 ø.0" ø." ø0.9" ø.0" HES0 HES0 Speed :,000~0,000 min - (rpm) Speed is steplessly variable from,000~0,000 min - (rpm). Smooth and powerful torque is delivered at both high and low speeds. The extremely high maximum speed of 0,000 min - (rpm) allows high precision micro-machining. Types of Motors Very high torque from compact motors. NAKANISHI Smart Switch Color Compact Type (ENK-00C) 0W Blue Torque Type (ENK-00T) 00W Gray NAKANISHI Smart Switch The switch provides a click sensation and a confirmation tone is produced by the control unit when the switch is operated. The motor type is distinguishable by the switch color. NAKANISHI Smart Switch Excellent Durability High performance brushless motor eliminates the need to change carbon brushes. NAKANISHI's internal load test has proven continuous use for more than,000 hours. High Precision NAKANISHI's ultra-precision technology ensures bur concentricity of 0.0 mm (0.000") or less, which allows for very high precision finishing. Simple Screw on Attachments Low Noise, Low Vibration The brushless motor and incorporated cooling fan have reduced the vibration and noise levels, resulting in a quieter, more comfortable work environment. Dramatically compared with conventional grinders. Special Dust-Proof Mechanism The handpiece has a patented built-in-dust protection system to prevent the infiltration of dust and debris into the front bearings. This NAKANISHI patented design assures long-term durability. 0 Types of Attachments Available All of the Espert 00 system attachments are available for use with this system. 9 different types of attachments and speed reducer making an almost infinite number of applications possible. Wide Range of Collet Available Collet sizes range from a tiny 0. mm up, with a wide variety of sizes available. Tools can be changed without the use of any wrenches. Micro Grinder & Handpiece Stand This specially designed micromotor stand allows easy pick-up and set-down of the micro-grinder. Strong, but soft to the touch, the micro-grinder stand contains convenient, integrated storage compartments for adjustment wrenches and a spare chuck. -p0
-p0- A_0_-p0- A_0.qxd /0/ : PM Page -p New Advanced Design Control Unit Optimal Control via Microcomputer The operation of all Espert 00 functions is controlled by a high performance microcomputer (CPU) that is programmed with NAKANISHI's proprietary technology. NAKANISHI s CPU has direct control of the brushless micro-grinder allowing smooth and highly precise cutting and polishing of a wide variety of materials. Bur "chatter" has been eliminated. The system automatically senses which micromotor is attached (ENK-00C or ENK-00T) and self adjusts to provide optimum micro-grinder performance. Eco-Friendly Design The electronic circuits are designed using NAKANISHI's proprietary technology to meet eco-friendly expectations by minimizing power consumption. Since power demands are minimal, no significant heat is generated and no cooling fan is required. Auto Cruise Function The control unit is equipped with an auto cruise function that operates the micro-grinder at a preset speed without the need to use the foot pedal. This function eliminates foot fatigue during prolonged operation. Memory Speed Function FiXpeed An exclusive new feature of the Espert 00 system, the FiXpeed system allows the user to independently preset the speed of motor A and motor B. For example motor A can be set to maintain the speed set by the FiXpeed system while motor B has variable control using a foot pedal. This function allows for unprecedented flexibility. Simplified Hand and Foot Pedal Control You no longer need to push a switch on the control unit to switch between hand and foot pedal control. If you want to operate the motor handpiece by hand simply push the NAKANISHI Smart Switch, if you want to use foot pedal control simply depress the foot pedal. Compliance with EMC and other Safety Standards NAKANISHI has given considerable thought to 'behind the scenes' performance. The Espert 00 system complies with the world's most rigorous EMC standards. In electromagnetic terms, it has been designed to be very safe so as to curb the generation of electromagnetic interference (noise), which may cause failure or malfunctions in other equipment. The Espert 00 system will not be affected by external electromagnetic interference. The Espert 00 system also complies with the strict European safety standard EN00-. Operator safety is always NAKANISHI's highest priority. EMC (Electromagnetic Compatibility) A/B Motors Can Be Connected High Quality Metallic Silver Body Other Features Self Check Function (Maintenance Mode) Smooth Operation Operation Check Sound Highly Visible and easy to operate front panel -Digit Digital Display Error Code Display Function NAKANISHI's internal endurance tests E0 E0 ø." ø.0" E00 ø.0" ø." ø0.9" ø.0" HES0 HES0 00 Control Unit Model Specifications ES90 NE9 Power Source : AC0V, 0-0Hz Dimensions : W." x D9.0" x H.0" Weight : lb.. oz. Accessories : Handpiece Stand : pc. Handpiece Holder : pc. Price 90.00 Order by catalog number. -p
-p0- A_0_-p0- A_0.qxd /0/ : PM Page -p 00 STANDARD SET Espert 00 Standard Set (Ring Type) High Power System. Max. Output 0W Speed Range :,000~0,000 min - (rpm) Microprocessor controlled for optimal motor control Hand Switch [NAKANISHI Smart Switch] Memory Speed Function [FiXpeed ] ES90 Model ES0C-HR Price,.00 E0 E0 ø." ø.0" Attachment EHR-00 Motor ENK-00C Unit NE9 Control Unit (NE9) : pc. Compact Motor Handpiece (ENK0C-HR) : pc. Collet ø/" (CHH-.), Standard ø. mm (CHH-.) : pc. each Accessories Handpiece Holder : pc. Handpiece Stand : pc. Wrench ( x.) : pc. Pin Wrench : pc. L-Wrench (9) : pc. E00 ø.0" ø." Espert 00 Compact Motor Handpiece ø. mm (ø0.") Speed Range,000~0,000 min - (rpm) Max. Output 0W Weight. oz. excluding cord." NAKANISHI Smart Switch (Blue)."." ø.0" ES909 Model ENK0C-HR Price,0.00 Standard Accessories Attachment EHR-00 Motor ENK-00C Collet ø/" (CHH-.), ø. mm (CHH-.) : pc. each Wrench ( x.) : pc. Pin Wrench : pc. L-Wrench (9) : pc. ø0.9" ø.0" HES0 HES0 Espert 00 Torque Set (Ring Type) Espert 00 Torque Motor Handpiece NAKANISHI Smart Switch (Gray) Highest Power in its Class. Max. Output 00W Speed Range :,000~0,000 min - (rpm) Microprocessor controlled for optimal motor control Hand Switch [NAKANISHI Smart Switch] Memory Speed Function [FiXpeed ] ES90 Model ES0T-HR Price,9.00 Attachment EHR-00 Motor ENK-00T Unit NE9 Control Unit (NE9) : pc. Compact Motor Handpiece (ENK0T-HR) : pc. Collet ø/" (CHH-.), Standard ø. mm (CHH-.) : pc. each Accessories Handpiece Holder : pc. Handpiece Stand : pc. Wrench ( x.) : pc. Pin Wrench : pc. L-Wrench (9) : pc. ES909 Model ENK0T-HR Price,0.00 Speed Range Max. Output Weight,000~0,000 min - (rpm) 00W. oz. excluding cord ø. mm (ø0.")."."." ø." Standard Accessories Attachment EHR-00 Motor ENK-00T Collet ø/" (CHH-.), ø. mm (CHH-.) : pc. each Wrench ( x.) : pc. Pin Wrench : pc. L-Wrench (9) : pc. -p
-p0- A_0_-p0- A_0.qxd /0/ : PM Page -p 00 SYSTEM CHART Model Price System Chart Attachment Ring Type ES9090 EHR-00.00 0,000 min - (rpm) Max. ( ) 0,000 min - (rpm) Max. ( ) Lever Type ES EHL-0.00 0,000 min - (rpm) Max. ( ) 0,000 min - (rpm) Max. ( ) 90 Angle Torque Type ES ERA-0.00 0,000 min - (rpm) Max. ( ) 0,000 min - (rpm) Max. ( ) Speed Reducer / Speed Reducer ES ERG-0B.00 0,000 min - (rpm) Max. ( ) 0,000 min - (rpm) Max. ( ) May be connected between the motor and the spindle as required for increased torque. Motor E0 E0 ø." ø.0" E00 Torque Type ES EHG-00.00 0,000 min - (rpm) Max. ( ) 0,000 min - (rpm) Max. ( ) LUSTER (Reciprocating motion) ES ELS-00 90.00 0,000 min - (rpm) Max. ( ) Compact Motor and Cord,000~0,000 min - (rpm) ES90 ENK-00C 0.00 Torque Motor and Cord,000~0,000 min - (rpm) ø.0" ø." ES909 ENK-00T 0.00 90 Angle Type ES EIC-00 9.00 0,000 min - (rpm) Max. ( ) 0,000 min - (rpm) Max. ( ) MINI-LUSTER (Reciprocating motion) ES EML- 0,000 min - (rpm) Max. ( ) 9.00 Control Unit ø0.9" ø.0" HES0 HES0 Angle Type ES EKC-00 0.00 0,000 min - (rpm) Max. ( ) 0,000 min - (rpm) Max. ( ) FINE BELT SANDER KBS EBS-0 00.00 0,000 min - (rpm) Max. ( ) 0,000 min - (rpm) Max. ( ) Use ECN-0 or ERG-0 for ELECTER Emax EVOlution, attachments Extension Adaptor ES ECN-0.00 Speed Reducer (/) ES ERG-0.00 Espert 00 ES90 NE9 90.00 Maximum Allowable Speed, continuous use may change depending on the material being cut and other application variables. : Maximum Allowable Speed, intermittent use. : Maximum Allowable Speed, continuous use. Order by catalog number. -p
-p0- A_0_-p0- A_0.qxd /0/ : PM Page -p 00 MOTORS & ATTACHMENTS ES90 COMPACT TYPE MOTOR ENK-00C E0 E0 ø." ø.0" E00 ø.0" ø." ø0.9" ø.0" HES0 HES0 ø. mm (ø0.9") Compact Type Motor ø. mm (ø.") Ring Type Attachment Model Standard Accessories Price ES9090 ES9090 Lever Type Attachment RING TYPE ATTACHMENT EHR-00 Manufactured with micron level precision for high accuracy and." high reliability. Slim, lightweight design allows for fine finishing of delicate parts. Ring Type one touch bur release. EHR-00,000~0,000 min - (rpm) Small, lightweight, high-speed brushless DC motor. operation. Very low vibration noise and maintenance. Collet ø/" (CHH-.), ø. mm (CHH-.) : pc. each Wrench ( x.) : pc. Pin Wrench : pc. L Wrench (9) : pc. Incorporates the NAKANISHI Smart Switch for easy on/off Weight :.0 oz. excluding cord Model Specifications Price ES90 ES909 Torque Type Motor ES909 ES TORQUE TYPE MOTOR ENK-00T ENK-00T,000~0,000 min - (rpm) High-power, high-torque, high-speed brushless DC motor. operation. Very low vibration noise and maintenance. Incorporates the NAKANISHI Smart Switch for easy on/off Weight :. oz. excluding cord Model Specifications Price ø. mm (ø0.") ø. mm (ø0.")." ENK-00C." Output Power : 0W Maximum Torque :.0 cn m Cord Length :. ft Output Power : 00W Maximum Torque :. cn m Cord Length :. ft ø0." Collet Standard Size : ø/" (CHH-.), ø. mm (CHH-.) : pc. each Optional Collets : CHH-[][] are shown in page (-p) Weight :. oz. 0,000 min - (rpm) Max. ( ) 0,000 min- (rpm) Max. ( ) Model Standard Accessories Price 0.00 0.00.00 LEVER TYPE ATTACHMENT EHL-0 To attain more powerful grinding and fine polishing finish,." attachment EHL-0 is designed to make it lightweight and fit to pen-grip type holding. Simple lever turning for bur exchange. Same chuck as used in EHR-00. ø0." Collet Standard Size : ø/" (CHH-.), ø. mm (CHH-.) : pc. each Optional Collets : CHH-[][] are shown in page (-p) Weight :. oz. 0,000 min - (rpm) Max. ( ) 0,000 min- (rpm) Max. ( ) ES EHL-0 Collet ø/" (CHH-.), ø. mm (CHH-.) : pc. each Wrench ( x.) : pc..00 -p
-p0- A_0_-p0- A_0.qxd /0/ : PM Page -p 00 ATTACHMENTS Collet Standard Size : ø/" (CHG-.) : pc. Optional Collets : CHG-[][] are shown in page (-p) Weight :. oz. 0,000 min - (rpm) Max. ( ) 0,000 min- (rpm) Max. ( ) Please use it together with Speed Reducer. Torque Type Attachment Model Standard Accessories Price ES 0.0" ES ø0.0"." ø0." Collet ø/" (CHC-.) : pc. Chuck Wrench (K-) : pc. Wrench (0 x ) : pc. Standard Accessories : set." Angle Attachment is suitable for working in corners, cavities, etc. Reverse rotation against the motor Speed Reduction Ratio : / Collet Standard Size : ø/" (CHC-.) : pc. Optional Collets : CHC-[][] are shown in page (-p) Standard Accessories : Rubber Pad, Paper Disk Weight :.90 oz. 0,000 min - (rpm) Max. ( ) 0,000 min- (rpm) Max. ( Refer to -p0~p about the detail of Accessories. ) º Angle Attachment Model Standard Accessories Price 0.9" ES." EHG-00 EIC-00 ø0.0" EKC-00 ø0.9".9"." ø0." ø0." Collet ø/" (CHC-.) : pc. Chuck Wrench (K-) : pc. Wrench (0 x ) : pc. Standard Accessories : set ø0." Torque type attachment used with ø/" chuck diameter as standard and nicely fits in hand-grip..00 90 Angle Attachment with ø/" Collet is conveniently small and equally suitable for polishing flat surfaces with rubber pad paper disk, corner work, and grinding the inside of a pipes. Speed Reduction Ratio : / Collet Standard Size : ø/" (CHC-.) : pc. Optional Collets : CHC-[][] are shown in page (-p) Standard Accessories : Rubber Pad, Paper Disk Weight :.90 oz. Refer to -p0~p about the detail of Accessories. 0,000 min - (rpm) Max. ( ) 0,000 min- (rpm) Max. ( ) 90º Angle Attachment Model Standard Accessories Price ES ES ES ES TORQUE TYPE ATTACHMENT EHG-00 Collet ø/" (CHG-.) : pc. Wrench (0 x 0) : pc. Bar Wrench (K-) : pc. 90 ANGLE ATTACHMENT EIC-00 ANGLE ATTACHMENT EKC-00 90 ANGLE TORQUE ATTACHMENT ERA-0 90 Angle type is suitable for the work of corner and the grinding of the inside of pipe. Speed Reduction Ratio : /. Collet Standard Size : ø/" (CHS-.) : pc. Optional Collets : CHS-[][] are shown in page (-p) Weight :. oz. 0,000 min - (rpm) Max. ( ) 0,000 (rpm) Max. ( ) min- 9.00 0.00 ø.0" ø." E0 E0 ø." ø.0" E00 ø0.9" ø.0" HES0 HES0 Refer to -p0~p about the detail of Accessories. 90º Angle Torque Attachment Model Standard Accessories Price ES ERA-0 Collet ø/" (CHS-.) : pc. Wrench ( x ), ( x.), (0 x ) : pc. each.00 Maximum Allowable Speed, continuous use may change depending on the material being cut and other application variables. : Maximum Allowable Speed, intermittent use. : Maximum Allowable Speed, continuous use. Order by catalog number. -p
-p0- A_0_-p0- A_0.qxd /0/ :9 PM Page -p 00 ATTACHMENTS ø.0" ø." E0 E0 ø." ø.0" E00 ø0.9" ø.0" HES0 HES0.9" ø0.9" Model Standard Accessories KBS ES ES ø0." ø0." KBS Reciprocating Motion Polishing Finisher LUSTER ATTACHMENT ELS-00 Reciprocating Stroke (variable) : 0~,00 times/min (Max.) Perfect for final finishing such as lapping and honing after Stroke is adjustable from 0~ mm.." FINE BELT SANDER Attachment EBS-0." Reciprocating Motion Polishing Finisher LUSTER Attachment Model Standard Accessories ES ELS-00 grinding. Streamlines conventional hand-finishing of metal molds. Reciprocating type compact special polisher for motor. Max. tool shank diameter ø0.", Screw clamp type. Weight : lb..99 oz. 0,000 min - (rpm) Max. ( ) Standard Accessories Allen Wrench ( mm) : pc. Lubrication Oil Lubrication Nozzle for LUSTER Pencil-Type Reciprocating Polishing Finisher MINI-LUSTER ATTACHMENT EML- Reciprocating Stroke (variable) : 0~0,000 times/min (Max.)." Stroke Range : 0. mm Max. tool shank diameter ø0.", Screw clamp type. Weight :.9 oz. 0,000 min - (rpm) Max. ( ) Pencil-Type Reciprocating Polishing Finisher MINI-LUSTER Attachment Model Stroke Range Standard Accessories ES EML- 0. mm FINE BELT SANDER ATTACHMENT EBS-0." Standard Accessories : set Allen Wrench (. mm) : pc. The angle of belt section is steplessly adjustable. Width of Belt : mm, mm, mm. Belt Speed : 0~,0 ft/min (Max.) Weight :. oz. 0,000 min - (rpm) Max. ( ) 0,000 min- (rpm) Max. ( ) Refer to -p about the detail of Belt. mm Belt ( different kinds) : pcs. each mm Belt ( different kinds) : pcs. each mm Belt ( different kinds) : pcs. each Allen Wrench ( mm) : pc. Price 90.00 Price 9.00 Price 00.00 -p
-p0- A_0_-p0- A_0.qxd /0/ :9 PM Page -p 00 SPEED REDUCER & ø0." ES." Speed Reducer (/) ES." Extension Adaptor SPEED REDUCER (/) ERG-0B Model Speed Ratio / Speed Reducer ERG-0B provides times greater torque by mounting it in between the motor and the attachment. Weight :.9 oz. 0,000 min - (rpm) Max. ( ) 0,000 min - (rpm) Max. ( ) Model Speed Reduction Ratio ES ERG-0B Speed Reduction Ratio / EXTENSION ADAPTOR ECN-0 The Adaptor can be used with the attachments for Emax EVOlution and you already have. Weight :.09 oz. 0,000 min - (rpm) Max. ( ) 0,000 min - (rpm) Max. ( ) Price ES." SPEED REDUCER (/) ERG-0 The Speed Reducer can be used with the attachments for Emax EVOlution and you already have. Reduces the speed / and multiplies the torque by times. Weight :.9 oz. 0,000 min - (rpm) Max. ( ) 0,000 min - (rpm) Max. ( ).00 ES ERG-0 Speed Reduction Ratio / Price Speed Reducer (/) Model Speed Reduction Ratio Price.00 E0 E0 ø." ø.0" E00 ES ECN-0 Speed Ratio :.00 ø.0" ø." 00 Spare Parts Product Description Model Specifications Price Foot Pedal Espert 00 Handpiece Stand Espert 00 Compact Motor Cord Espert 00 Compact Motor Cord Espert 00 Torque Motor Cord Espert 00 Torque Motor Cord EG0 0 ES909 ES909 FC-0 Z0909 ENKCD-0C Variable Speed Control Foot Pedal Compact Motor Cord. ft Long 909 ENKCD-0C M Compact Motor Cord 9. ft Long ENKCD-0T Torque Motor Cord. ft Long 909 ENKCD-0T M Torque Motor Cord 9. ft Long.00.00.00 90.00.00 90.00 ø0.9" ø.0" HES0 HES0 Maximum Allowable Speed, continuous use may change depending on the material being cut and other application variables. : Maximum Allowable Speed, intermittent use. : Maximum Allowable Speed, continuous use. Order by catalog number. -p