Crawler Excaator R 922 Motor 110 kw / 150 HP Stage IIIA / Tier 3 Operating Weight 22,050 25,600 kg Bucket Capacit 0.17 0 3
Motor 110 kw / 150 HP Stage IIIA / Tier 3 Operating Weight 22,050 25,600 kg Bucket Capacit 0.17 0 ³ 2 Perforance Efficienc Perforance, precision and responsieness High leel of productiit for a lower oerall operating cost
Reliabilit Cofort Maintainabilit Result of ongoing iproeents Spacious, ergonoic and with high-isibilit Siplified dail checks, longer aintenance interals 3
Perforance Perforance, Precision and Responsieness 4
Adanced Techniques Heighten Perforance In its design offices, Liebherr cobines the technological know-how of each area to create consistent and optiised integrated sstes. Liebherr s electronics, positie control hdraulics, and een the trael otors are designed fro the start to be interconnected and generate optiu operating power with fast and fluid oeents. Positie Control Hdraulic Sste Two working pups for axiu excaation, trael or swing efficienc, proide power to the coponents inoled. Thanks to the positie control sste, the cobined oeents are optiised for each different work operation, whether this be leelling, extraction, loading or lifting, with or without trael. Engine Cuins engine Stage IIIA / Tier 3 Designed specificall for construction applications Autoatic fuel-saing idling sste Wastegate turbo for enhanced perforances at low speed and reduced consuption Particularl Fast Work Ccles The work ccles of the R 922 are er fast thanks to the large sized transission coponents. For exaple, the uppercarriage s swing drie can quickl reach its axiu speed with a high swing torque. Operating Pressure Maxiu digging and break-out forces can be reached thanks to the leel of hdraulic pressure, without appling teporar oerpressure. Maxiu forces are therefore guaranteed continuousl during the whole working phase to achiee a high leel of production. To further iproe the achine perforances, the equipent speed is optiized through an integrated regeneration circuit. Undercarriage Robust design for greater resistance and a better distribution of forces Eas and safe transport thanks to integrated lashing ees Two different tpes of undercarriages adapted to different operating configurations and transport conditions Productiit and Flexibilit Higher digging and break-out forces for increase in productiit New optional pads aailable in 700 and 800 for ore ersatilit New swing otor for higher swing torque and speed 5
Efficienc High Leel of Productiit for a Lower Oerall Operating Cost 6
Less Fuel Associated with the latest deelopents in technolog and hdraulics, the tried-and-tested 6-clinder Cuins engine consues little fuel, both in ters of hours of operation and in ters of tons of aterial oed. Electronic Power Control This control sste allows the engine power to be effectiel and optiall conerted, fro an energetic point of iew, into hdraulic power. This results in greater forces, a faster working speed and a lower fuel consuption. Increased Productiit Clearl enhanced perforances and low consuption, cobined with the largest fuel tank on the arket, all in a cofortable and ergonoic work enironent, lead to significant increases in productiit in all operating configurations. Liebherr Lubricants Liebherr offers ou a full range of lubricants and coolants for our Liebherr achines Being designed especiall for our Liebherr achines, Liebherr lubricants contribute significantl to lowering our operating and aintenance costs Liebherr Tools Wide range of tools suitable for eer tpe of application Tools designed for axiu productiit and durabilit Shape of buckets designed to assist the filling and stabilit of bulk aterials during the transport stages Modular Quick-Change Sste Made b Liebherr The suitable digging tool for eer application The optional quick-change sste pas for itself er quickl and our achine becoes a ultifunctional tool carrier 7
Reliabilit Result of Ongoing Iproeents 8
Qualit in the Sallest Details Robust and large-sized coponents, optial fitting of electrical and hdraulic lines, or an exeplar leel of finishing are just soe of the an criteria that ensure a axiu qualit of anufacture and operabilit. A Top-of-the-Range Anti-Corrosion Protection A pre-assebl painting process guarantees that all painted parts are full coated. The use of a high-qualit paint proides resistance against extree external conditions. Cuins Engine Proen reliabilit Serice and spare parts aailable worldwide Optial utilisation een with high sulphur fuel Coon-Rail injection sste copatible with fuels containing a higher leel of sulphur, for a worldwide use Bio-diesel copatibilit Perfect Match The indiidual coponents of the power train such as the diesel engine, gears, swing drie, working pups and hdraulic clinders are specificall diensioned to work together. This eans that the are all copatible with each other in a global sste, guaranteeing higher reliabilit and a longer serice life. Autoatic Control of Functionalit The operator can entirel focus on his job, because the integrated on-board electronic continuousl perfors a coparison with pre-deterined target data. Eentual deiations fro the target paraeters are shown on the displa. Ke Technologies Made b Liebherr Perfect atching of the coponents to construction achine operations The electronic coponents, asterind of the achine, are anufactured b Liebherr Main steel coponents, such as undercarriage, equipent odules, and slewing superstructure, all designed b Liebherr Spare Parts Serice An spare parts required are aailable worldwide within 24 hours. And that eans high operational readiness of the achines, whereer, wheneer Oer 80,000 spare parts in stock at all ties 9
Cofort Spacious, Ergonoic and with High-Visibilit 10
A First Class Work Space In this cab, the operator benefits fro a high-qualit echanical suspension seat, an enlarged space and a er cofortable working enironent. Depending on the operator s needs, the Cofort seat can be selected as an option. This seat offers axiu cofort thanks to its air suspension, seeral horizontal and ertical settings, as well as its adjustable pneuatic lubar support. It is especiall designed to eet the ost challenging cofort requireents of operators, in all working situations. Uncoproised Visibilit The er large glazed surface area and inial area of fraes guarantee optial isibilit fro the operator s platfor, as well as a wide eergenc exit fro the rear window for the operator s safet and peace of ind. Ergonoic Proportional Josticks The proportional josticks are er finel tuned controls for the sensitie, accurate and fluid operation of the achine. This tpe of control is ideal for a achine used in a ariet of applications. Low Noise Leel and Vibrations To diinish fatigue at work and increase productiit, the acoustic power inside the operator s cab is one of the lowest on the arket. The cab is ounted on iscoelastic riets to full absorb the excaator s ibrations. Furtherore, rubber flanges support the pipes and actiel participate in reducing external noise. Touch-Screen Displa 7-inch touch-screen with colour displa Wide range of adjustent, check, and onitoring possibilities Tough, reliable design (sealing tightness class IP 65) Heightened Visibilit Optional rear iew onitoring caera, for optial isibilit and heightened operating safet Optiized design of the whole uppercarriage proiding the operator with an iproed field of ision Front windshield full retractable into the roof, with or without lower glass panel Secure eergenc exit through the rear window Optial Teperature Enhanced air-conditioning sste, proiding iproed cooling perforances Optional dark tinted windows 11
Maintainabilit Siplified Dail Checks, Longer Maintenance Interals 12
Ease of Maintenance All the walking areas of the uppercarriage are coered with antislid aterial to guarantee a safe and eas access. The swing gear is greased for life and requires no dail aintenance. The batteries, all filters and ost centralized lubrication points are accessible fro ground leel, ensuring that dail aintenance and checks are quick and easil perfored. Siplified Dail Checks The dail checks were taken into account fro the start of the design, to ake the sipler, ore accessible and shorter. The optional autoatic lubrication sste reduces precious sericing tie while guaranteeing optial lubrication of the excaator. LiDAT Data Transfer Sste Coplete fleet anageent, all fro one source Optiized econoical perforance of the achine park thanks to detailed iew of the distribution of operating states and ties Reports on capacit coitent and the use of the achine park can be called up dail ia the Web portal Precise location of the achine Regional deliitation and fixed serice ties increase safet and reliabilit Longer Serice Interals The frequenc of the serice interals is optiised to guarantee that each part is operating optiall and that the aintenance operations are onl perfored as necessar. Whether it is the interal for changing the hdraulic oil, which can be up to 3,000 hours, or the interal for changing the engine oil, eer 500 hours, eerthing has been taken into account to reduce the frequenc of interentions and thus liit the achine s downtie and reduce costs. Expert Adice and Serice Proisions Liebherr offers an expert adice serice. Qualified personnel will help ou ake the appropriate decisions to eet our needs: sales discussion based on the application, serice agreeents, adantageous repair alternaties, original parts anageent, and reote data transfer for fleet anageent. Accessibilit to Serice Areas Access to batteries and filters fro ground leel Access platfor to engine oil dipstick Central Lubrication Sste The anual central lubrication sste (3 points), fitted as standard, allows for dail lubrication of eleents and reduction of achine downties The optional autoatic lubrication sste proides onl the required aount of grease to the arious coponents and increases their lifetie. It aoids spillage and waste, and quickl pas for itself 13
Long Lie Progress with the R 922 Equipent High digging and breakout forces Integrated regeneration circuit Fast cobined oeents Cast steel eleents Greater resistance to stresses Longer serice life Tools Large standard and HD buckets New bucket design Z-tpe Liebherr teeth for fast replaceent Wide range of work tools Undercarriage Special heat treatent for low wear and tear of drie sprockets Robust construction Redesigned and strengthened New trael otors for increased drawbar pull Integrated lashing ees 14
Operator s Cab Cofortable and ergonoic New 7" high resolution color touchscreen for heightened readabilit, eas to use and with ore inforation aailable Large glazed surface area with secure eergenc exit through the rear window Efficient air conditioning European Design Centralized Lubrication Reduced aintenance tie Longer serice life thanks to better lubrication Engine Proen reliabilit Extra large fuel tank Low fuel consuption Longer autono On-deand hdrostatic drien fan Uppercarriage New swing otor and gearbox for higher swing torque and speed Swing gear greased for life Steel doors and engine bonnet All walking areas coered with anti-slid aterial Ground leel access to all filters and batteries Optiized design of the whole uppercarriage proiding the operator with a better field of ision Optional rear iew onitoring caera 15
Technical Data Engine Rating per SAE J1995 / ISO 3046 Model Tpe Bore Stroke Displaceent Engine operation Exhaust gas treatent Cooling sste Air cleaner Fuel tank Fuel cleaner Electrical sste Voltage Batteries Starter Alternator Engine idling Motor anageent Hdraulic Sste 110 kw (150 HP) at 1,800 RPM Cuins QSB 6,7 6 clinder in-line 107 124 6.7 l 4-stroke diesel Coon-Rail, turbo eission standard stage IIIA / Tier 3 water-cooled and integrated otor oil cooler, after-cooled and water-cooled dr-tpe air cleaner with pre-cleaner, priar and safet eleents 580 l pre-filter (7 μ) and fine filter (5 μ) for the fuel suppl sste 24 V 2 x 135 Ah / 12 V 24 V / 7.8 kw three-phase current 24 V / 70 A sensor controlled connection to the integrated excaator sste controlling ia CAN-BUS to the econoical utilisation of the serice that is aailable Hdraulic Controls The controlling is conducted ia the integrated excaator sste technolog, input and output odules, counicated ia the CAN-BUS with the electronic central unit Power distribution ia control ales with integrated safet ales Flow suation to boo and stick Sero circuit Attachent and swing proportional ia jostick leers Trael with proportionall functioning foot pedals and leer speed pre-selection or autoatic adjustent Additional functions proportional regulation ia foot pedals or ini- jostick 16 Hdraulic sste Regeneration Hdraulic pup Max. flow Max. pressure Pup anageent Hdraulic tank Hdraulic sste Hdraulic oil filter Cooling sste MODE selection RPM adjustent Tool Control Positie Control dual circuit hdraulic sste for independent and need-based quantit allotent ia the hdraulic pups; sensor-guided features high sste dnaics and sensitiit proided b integrated sste controlling integrated into the ain hdraulic block ariable double pup, in-line and swashplate 2 x 216 l/in. 350 bar electronic pup anageent ia the integrated sste controlling (CAN-BUS) snchronous to the control block 100 l ax. 300 l 1 full flow filter (10 μ) in return line copact radiator, coprising cooling unit for water, hdraulic oil, after-cooler and hdrostaticall drien fan adjustent of engine and hdraulic perforance ia a 3-ode selector to atch application, e.g. ECO ode for econoical and enironentall friendl operation or POWER+ ode for axiu digging perforance and hea-dut jobs stepless adjustent of engine output ia RPM at each selected ode 10 preadjustable pup flows and pressures for add-on tools Swing Drie Drie Transission Swing ring Swing speed Swing torque Holding brake swashplate otor, shockless and antireaction copact planetar reduction gear sealed race ball bearing swing ring, internal teeth 0 11.3 RPM stepless 73.3 kn wet ulti-disc (spring applied, pressure released)
Operator s Cab Cab Operator s seat Control sste Operation and displas Air-conditioning ROPS (option) safet cab structure with indi idual windscreens or featuring a slide-in subpart under the ceiling, work headlights inte grated in the roof, a door with a sliding window (can be opened on both sides), large storing possibilities, shock-absorbing suspension, sounddaping insulating, tinted lainated safet glass, separate window shades for the sunroof window and windscreen, 24 V plug, 12 V optional, bottle holder Standard seat, airsprung with echanic weight adjustent, ertical seat daping including consoles and josticks. Seat and arrests adjustable separatel and in cobination ar consoles, oing with the seat large high-resolution colour displa with self explanator operation ia touchscreen, ersatile adjusting, control and onitoring facilities, e.g. ipleent and tool paraeters standard autoatic air-conditioning, abient air function, fast de-icing and deisting at the press of a button, air ents can be operated using special buttons. Filter for reccling and fresh air filter can be replaced and are acces sible fro the inside. Heating-cooling unit, designed for extree outside teperatures Undercarriage Versions SLC LC Drie Transission Maxiu trael speed Net drawbar pull on crawler Track coponents Track rollers / Carrier rollers Tracks Track pads Holding brake Brake ales Lashing ees B60, aintenance-free 8/2 sealed and greased triple grouser wet ulti-disc (spring applied, pressure released) integrated into trael otor integrated Attachent Tpe Hdraulic clinders Bearings Lubrication Hdraulic connections gauge 2,250 gauge 2,380 Liebherr swashplate otor with brake ales on both sides Liebherr copact planetar reduction gear low range 3 k/h high range 5 k/h 228 kn cobination of resistant steel plates and cast steels coponents clinders with special seal-sste, shock protection sealed, low aintenance anual central lubrication sste or optional autoatic central lubrication sste (except link and tilt geoetr) pipes and hoses equipped with SAE splitflange connections 17
Diensions E D A W C H K P Q L U X V R0424.01 N S B G Z E D A W C H K Q Z V X 18 R0490 N L U P S B G
SLC A 2,700 C 3,060 D 2,800 E 2,820 H 2,490 K 1,125 L 3,640 P 960 Q 465 S 2,250 U 4,440 N 600 700 800 B 2,850 2,950 3,050 G 2,790 2,990* 2,990* Z 5,025 * width with reoable steps Stick length V 2.00 2.50 2.90 W 2.00 2.50 2.90 X 2.00 2.50 2.90 Mono boo 5.70 6,350 5,850 5,250 3,200 3,250 3,250 9,750 9,750 9,750 LC A 2,700 C 3,060 D 2,800 E 2,820 H 2,490 K 1,125 L 3,640 P 960 Q 465 S 2,380 U 4,440 N 600 700 800 B 2,980 3,080 3,180 G 2,920 3,120* 3,120* Z 5,025 * width with reoable steps Stick Mono boo 8.90 length V 6.30 7,250 W 6.30 3,100 X 6.30 12,900 19
Backhoe Bucket with Mono Boo 5.70 and Counterweight 3.5 t ft 10 30 9 25 R0425.01 Digging Enelope Stick length Max. digging depth Max. reach at ground leel Max. duping height Max. teeth height 8 7 20 15 10 5 0-10 -20 3 2.90 6.65 9.80 6.75 9.65 5 Forces 4 1 2 3 Digging force (ISO 6015) kn 146 126 113 t 1 12.8 1 Breakout force (ISO 6015) kn 157 157 157 t 16.0 16.0 16.0 3 2 1 Operating Weight and Ground Pressure 0 The operating weight includes the basic achine with counterweight 3.5 t, ono boo 5.70, stick 2.90 and bucket 0.95 3 (700 kg). -2 Undercarriage SLC LC Pad width 600 700 800 600 700 800 Weight kg 22,050 22,350 22,600 22,150 22,450 22,700 Ground pressure kg/c2 0.47 0.41 0.36 0.47 0.41 0.36-3 -4-15 2 2.50 6.25 9.45 6.55 9.45 6-1 -5 1 2.00 5.75 8.95 6.35 9.20-5 1-6 2 3-7 -25-8 11 10 35 9 30 8 7 25 6 20 5 4 15 3 10 2 1 5 0 0 ft Weight4) Weight 3) Capacit ISO 7451 Cutting width Buckets Machine stabilit per ISO 10567* (75 % of tipping capacit) SLC-Undercarriage (with track pads 600 ) LC-Undercarriage (with track pads 600 ) Stick length () without quick coupler with quick coupler 2.00 2.50 2.90 2.00 2.50 2.90 Stick length () without quick coupler with quick coupler 2.00 2.50 2.90 2.00 2.50 2.90 HD2) STD1) 3 kg kg 850 0.60 580 590 1,050 0.80 660 670 1,050 0.95 700 710 1,250 1.15 780 790 1,250 1.25 890 920 V V V 1,400 0 950 980 850 0.60 640 650 1,050 0.80 730 740 1,050 0.95 790 800 1,250 1.15 880 890 1,250 1.25 1,010 1,040 V V V V 1,400 0 1,090 1,120 * Indicated loads are based on ISO 10567, at axiu reach, and a be swung 360 on fir and een ground 1) Standard bucket with teeth Z 40 2) HD bucket with teeth Z 40 3) Bucket for direct ounting 4) Bucket for ounting to quick coupler (SWA 48, 250 kg) Other buckets aailable upon request Max. aterial weight = 2.0 t/3, = 1.8 t/3, = 1.65 t/3, = t/3, V = 1.2 t/3 20 V V V
Lift Capacities with Mono Boo 5.70, Counterweight 3.5 t and Track Pads 600 10.5* 10.5* 11.8 12.8* 10.5* 10.5* 12.8* 12.8* 7.0 6.5 6.1 6.0 6.0 6.2 7.5 6.9 6.6 6.5 6.5 6.6 8.1* 10.0* 10.9 10.7 10.8 9.6* 8.1* 10.0* 10.9 10.8 10.8 9.6* 6.0 4.7 4.6 4.4 4.2 4.1 4.1 6.2* 6.7* 7.2 6.9 6.8 6.8 5.0 4.7 4.5 4.4 4.4 6.2* 6.7* 7.2 7.0 6.9 6.9 7.5 3.2 3.1 3.4 3.3 5.0 6.1 4.2 3.5 3.1 3.1 3.5 4.4 6.5* 6.2* 5.6 5.0 5.7 7.2* 6.4 7.2 7.6 7.6 7.4 6.8 5.8 6.5* 4.5 3.7 3.3 3.2 3.3 3.7 4.7 6.5* 6.2* 5.6 5.7 7.2* 6.4 7.2 7.6 7.6 7.4 6.8 5.8 4.5 3.4 2.9 2.6 2.5 2.6 2.8 3.3 4.8 4.7 3.6 3.1 2.8 2.7 2.8 3.6 5.2* * 4.6 4.3 4.2 4.3 4.6 5.6 6.6* 5.2* * 4.7 4.3 4.2 4.3 4.7 5.6 6.6* 6.3 7.4 8.1 8.4 8.5 8.2 7.7 6.9 5.4 6.3 7.4 8.1 8.4 8.5 8.2 7.7 6.9 5.4 SLC 7.5 6.0 4.5 0 4.5 7.5 6.0 4.5 0 4.5 4.5 Undercarriage Stick 2.50 LC LC SLC Undercarriage Stick 2.00 7.5 6.0 4.5 0 9.9* 9.9* 1 14.0* 4.5 7.5 6.0 4.5 0 9.9* 9.9* 12.6 14.0* 4.5 4.5 7.1 6.6 6.1 5.9 5.9 6.0 6.3 7.3* 9.3* 10.9* 10.7 10.6 10.2* 7.5* 7.3* 7.0 6.6 6.4 6.4 6.5 6.8 7.3* 9.3* 10.9* 10.7 10.7 10.2* 7.5* 6.0 4.8 4.6 4.4 4.2 4.0 4.0 4.1 5.6* 6.2* 7.0* 6.9 6.8 6.7 6.8 4.7 4.4 4.3 4.3 4.3 5.6* 6.2* 7.0* 7.0 6.8 6.8 6.8 7.5 3.3 3.2 3.1 5.2 5.0 3.5 3.4 3.3 3.2 5.2 5.0 3.7 3.1 2.9 2.8 2.8 3.1 3.8 5.7 5.4 4.0 3.3 2.9 3.3 4.0 6.2 5.8* 5.7* 5.0 4.6 4.5 4.6 6.2 6.8* 5.8* 5.7* 5.0 4.6 4.5 4.6 6.3 6.8* 5.8 7.0 7.7 8.0 8.1 7.9 7.3 6.4 4.8 5.8 7.0 7.7 8.0 8.1 7.9 7.3 6.4 4.8 LC SLC Undercarriage Stick 2.90 7.5 6.0 4.5 0 4.5 7.5 6.0 4.5 0 4.5 Height 4.7* 4.7* 9.4* 9.4* 11.3 1* 11.7 11.7* 4.7* 4.7* 9.4* 9.4* 12.4 1* 11.7* 11.7* 4.5 6.7* 6.7 6.1 5.9 5.8 5.9 6.1 6.7* 7.1 6.6 6.4 6.3 6.4 6.6 6.7* 8.6* 10.4* 10.6 10.5 10.5* 8.4* 6.7* 8.6* 10.4* 10.7 10.6 10.5* 8.4* 6.0 4.8 4.7 4.4 4.1 4.0 3.9 4.0 5.2* 5.2* 5.8* 6.7* 6.9 6.7 6.7 6.7 5.2 5.0 4.7 4.4 4.3 4.2 4.2 5.2* 5.2* 5.8* 6.7* 7.0 6.8 6.7 6.7 Can be slewed through 360 7.5 3.3 3.2 2.9 2.9 5.2 5.0 4.8 3.5 3.4 3.2 3.2 3.1 5.3 5.0 In longitudinal position of undercarriage Max. reach * Liited b hdr. capacit The load alues are quoted in tons (t) at stick end (without bucket), and a be swung 360 on fir and een ground. Adjacent alues are alid for the undercarriage when in the longitudinal position. Capacities are alid for 600 wide track pads. Indicated loads are based on ISO 10567 standard and do not exceed 75 % of tipping or 87 % of hdraulic capacit (indicated ia *). Without bucket c linder, link and leer the lift capacities will increase b 300 kg. Lifting capacit of the excaator is liited b achine stabilit and hdraulic capacit. According to European Standard, EN 474-5: In the European Union excaators hae to be equipped with an oerload warning deice, a load diagra and autoatic safet check ales on hoist clinders and stick clinder(s), when the are used for lifting operations which require the use of lifting accessories. 21
Multi-User Attachent with Mono Boo 8.90, Counterweight 5.7 t and Track Pads 600 ft 45 14 40 12 35 Digging Enelope R0491 Stick length Max. digging depth Max. reach at ground leel Max. duping height Max. teeth height 10 30 25 20 15 0-5 -20-25 Digging force (ISO 6015) kn t Breakout force (ISO 6015) kn t 58 5,9 99 10,1 Forces 6 4 2 Operating Weight and Ground Pressure 0 The operating weight includes the basic achine with counterweight 5.7 t, ono boo 8.90, stick 6.30 and bucket 0.50 3 (375 kg). -2-10 -15 6.30 11.85 15.55 11.05 13.30 8 10 5 Undercarriage LC Pad width 600 700 800 Weight kg 25,050 25,350 25,600 2 Ground pressure kg/c 0.53 0.46 0.41-4 -6-8 -30-35 -40-10 -12 16 LC Undercarriage 55 14 50 12 45 40 12.0 10.5 9.0 7.5 6.0 4.5 0 4.5 6.0 7.5 9.0 2.0* 2.8* 3.8* * 6.1* 7.6* 8.8* Height 2.0* 2.8* 3.8* * 6.1* 7.6* 8.8* 10 35 8 30 25 6 20 4.5 6.5* 6.2* 4.7* * 5.6* 6.2 6.3 6.5 6.5* 6.5* 6.2* 4.7* * 5.6* 6.7* 8.2* 7.7* 6.5* Can be slewed through 360 4 15 2 10 0 5 0 ft 6.0 4.7* 4.4 4.2 4.1 4.0 4.1 4.2 4.4 4.7* 5.6* 6.3* 6.7* 6.8* 6.7* 6.5* 5.9* * 7.5 3.2* 3.8* 3.6 3.3 3.1 2.9 3.2 3.2* 3.8* 4.3* 4.8* 4.7* 4.1* 9.0 2.6* 2.9* 2.8 2.6 2.4 2.3 2.3 2.3 2.4 2.5 2.6* 2.9* 3.2* 3.6* 3.9* 3.9 3.8 3.8 3.8 3.9 3.2* 10.5 2.1* 2.2* 2.3* 2.4* 2.5 2.3 2.2 2.0 1.9 1.9 1.8 1.9 1.9 In longitudinal position of undercarriage 2.1* 2.2* 2.3* 2.4* 2.6* 2.9* 3.1* 3.3 3.2 3.1 3.1 3.1 12.0 1.9* 2.1 2.0 1.9 1.8 1.7 1.7 1.6 Max. reach 1.9* 2.2* 2.3* 2.5* 2.6* 2.8 2.7 2.6 2.5 2.5 13.5 1.6 1.4 1.3 1.3 1.8* 2.2* 2.3 2.3 2.2 2.2 1.7* 1.6* * * 1.4 1.3 1.2 1.2 1.2 1.3 1.4 1.6 1.9 2.4 1.7* 1.6* * * * 1.6* 1.6* 1.7* 1.9* 2.1* 2.2 2.3 2.6 * 3.1* 10.1 11.4 12.4 13.2 13.7 14.1 14.3 14.3 14.2 13.9 13.5 12.8 11.9 10.8 9.2 * Liited b hdr. capacit The load alues are quoted in tons (t) at stick end (without bucket), and a be swung 360 on fir and een ground. Adjacent alues are alid for the undercarriage when in the longitudinal position. Capacities are alid for 600 wide track pads. Indicated loads are based on ISO 10567 standard and do not exceed 75 % of tipping or 87 % of hdraulic capacit (indicated ia *). Without bucket c linder, link and leer the lift capacities will increase b 210 kg. Lifting capacit of the excaator is liited b achine stabilit and hdraulic capacit. According to European Standard, EN 474-5: In the European Union excaators hae to be equipped with an oerload warning deice, a load diagra and autoatic safet check ales on hoist clinders and stick clinder(s), when the are used for lifting operations which require the use of lifting accessories. R 922 Mono boo 8.60, stick 6.30 Cutting width Capacit 3 Weight kg Specific weight with LC-Undercarriage t/3 1) Ditch cleaning bucket 2 x 50 tiltable 22 Ditch cleaning buckets tpe 918 1,500 2,000 2,000 2,0001) 0.35 0.48 0.65 0.50 275 350 390 650 2.2 2.2 1.65 1,6001) 0.55 640 Buckets tpe 918 300 400 500 0.17 0.24 0.30 210 240 290 2.2 2.2 2.2 650 0.42 350 2.2 750 0.50 375 2.0 850 0.60 400 1.65 1,050 0.80 480 1.2
Standard Equipent Undercarriage Lashing ees Sprocket with dirt ejector Track guide (one piece per track frae) Track pads 600 Track rollers, lifetie-lubricated Tracks, sealed and greased Uppercarriage Anti-slid surfaces Engine hood with gas spring opening Handrails Manual central lubrication sste Manual ain switch Storage box, lockable Swing brake lock, aintenance-free Tool set 33 pieces Hdraulic Sste Filter with integrated fine filter Hdraulic pressure test ports Liebherr hdraulic oil Positie Control sste Pressure accuulators for controlled lowering of equipent with engine turned off Work ode selector Engine Autoatic engine idling Coon-Rail injection sste Confor with stage IIIA / Tier 3 eission standard Fuel filter and water separator Intercooler Oil leel Stepless adjustable engine speed Turbo charger Non-exhaustie list, please contact us for further inforation. 23 Operator s Cab 7" colour ultifunction displa with touchscreen Air conditioning, autoatic Cigarette lighter and ashtra Coat hook Cup holder Footrest Front windshield full retractable into the roof, with or without lower glass panel Fuel consuption indicator on touchscreen Headlights (two pieces, Halogen) Interior light Mechanical hour eters, readable fro outside the cab MP3 radio Operator seat with echanical daping Rain hood oer front window opening Reariew irrors Rear window eergenc exit Retractable seat belt 51 Roll-down sun blind Roof window, right window and windshield with safet glass Rubber floor at Sliding windows in cab door Storage bin Storage space Tinted windows Viscoelastic daping Wiper / washer Attachent Boo clinders oil regeneration Headlight on boo (right, Halogen) Load ale for hoist clinders (on distributor) Load ale for stick clinder (on distributor) Manual central lubrication sste (except connecting link for bucket kineatics) Stick clinder oil regeneration
Options Uppercarriage Autoatic central lubrication sste Diesel refuelling pup (electric) Electric socket for external start-up aid (24 V) Fuel anti-theft deice Fuel tank cap lockable with padlock Reariew irror on counterweight Right-hand reariew irror Hdraulic Sste Liebherr hdraulic oil, adapted for extree cliate conditions Engine Air pre-filter with dust trap Fuel preheating (24 V) Operator s Cab Additional front and / or rear cab headlights (Halogen or LED) Aber beacon Auxiliar heater (prograable) Dark tinted windows Electric socket (12 V) Eergenc stop button in cab Falling objects protection structure (FOPS) Front guard protection structure (FGPS) Front headlights (two pieces, LED) Handrest for josticks Liebherr proportional control (ini-josticks 2 axis) Operator seat Cofort with pneuatic daping and retractable seat belt Preparation for LiDAT (Liebherr data transfer sste) Protection guard (botto front window and / or roof window) Rear iew onitoring caera ROPS safet cab structure (ISO 12117-2) Sun isor Trael alar Attachent Additional headlight on boo (left, Halogen or LED) Autoatic central lubrication sste Botto protection for boo Botto protection for stick Filter for hdraulic haer return flow Headlight on boo (right, LED) High pressure circuit Hdraulic or echanical quick coupler Liebherr bucket range Liebherr tooth sste Mediu pressure circuit Oerload warning deice Safet check ales for stick clinder Safet check ales on hoist clinders Tool Control, 10 tool adjustents selectable ia displa Non-exhaustie list, please contact us for further inforation. Options and / or special attachents, supplied b endors other than Liebherr, are onl to be installed with the knowledge and approal of Liebherr in order to retain warrant. Liebherr-France SAS 2 aenue Joseph Re, B.P. 90287, FR-68005 Colar Cedex S +33 389 21 30 30, Fax +33 389 21 37 93 www.liebherr.co, E-Mail: info.lfr@liebherr.co www.facebook.co/liebherrconstruction RG-BK-OT LFR/SP-11841165-web-03.18_enGB All illustrations and data a differ fro standard equipent. Subject to change without notice. All indicated loads are based in accordance with ISO 9248. Undercarriage Steps, wide ersion for 700 and 800 track pads Track guides (three pieces per track frae) Track guides (two pieces per track frae) Track pads 700, 800