PRICE BOOK AIR SEEDER - PDF Free Download

PRICE BOOK AIR SEEDER Effective 1st January 2014 PHONE: 07 4660 6000 FAX NO: 07 4660 6030 www.simplicityaus.com.au

CONTENTS Model Codes Air Seeder Pricing.. Liquid Air Seeder Pricing. Liquid Air Seeder Options... Liquid Distribution Kits. 7 8 9&10 10 10&11 Air Seeding Options Seeding Kits. 12 XTRA-Steer... 12 8 Way Metering Units. 13 Stainless Metering Units... 13 Small Seeds Boxes... 13 Seed Sprayers. 13 Injection Kit.. 13 Duffusers.. 14 Camlocks.. 14 Wheel Centres. 14 LED Lighting Kit. 14 Load/Unload Auger 15 Auger/Tubulator Ready Kit.. 15 Tractor Clips 15 Jack Kit for FM s... 15 Harrow Hitch 15 On Board Calibration Display. 16 Simplicity Camera Monitoring Kits 16 Weight Scales.. 17 Calibration Tubs... 17 Wing Shut Off... 17 Bin Isolation Clutch 17 Lever Quick Release Couplers...... 17 Additional Couplers.. 17 Trailing (TQ & TR) Seeder Pull Options Adjustable A-Frame Hitch to suit TQC.. 18 A-Frame with Mouth Plates to suit TQC... 18 Bare Simplicity A-Frame to suit TQC 18 Stiff Bar & Chain to suit TQC.. 18 Steerable Quad Hitch Extension Frame 18 Trailed Rear Hitch Extension Frame.. 18 Tractor Hydraulics.... 19 Across Implement Hydraulic Lines... 19 Blower Specs & Formulae... 19 Blower Types and Options Rexroth Blower Motor 20 Dual Blower.. 20 2 P age

Monitors & Controllers Topcon E15 Eagle.. 21 Topcon ZYNX X20.. 21 Topcon X30..... 21 X20 External Switch Box..... 22 X20 External Master Switch... 22 X20 Guidance Software... 22 Topcon Tillage Switch Kit (MDECU)... 22 Topcon Tillage Switch Kit (Monitor)... 22 Topcon Blocked Head Monitor.. 22 Topcon Eagle Blocked Head Sensor Kit... 22 Monitoring / Drive Type Linear Actuator Variable Rate Control.. 23 Proportional Hydraulic Drive Mounted Models... 23 Electric Drive Mounted /Non Mounted Models 23 Non Ground Speed Relative Hydraulic Drive.. 23 Drop Wheel Drive 23 Wheel on Wheel Drive 23 Pricing / Drive Options Linear Actuator Variable Rate Control.. 24 Electric Drive 24 Proportional Hydraulic Drive 24 Tyre Specifications & Options. 25/26 Calculate Hopper Splits. 27 Machine Dimensions.. 28 Double Bin Splits. Triple Bin Splits 3 P age

A.C.N 010 669 959 Dealer Discount Structure (Wholegoods) Effective 1st January 2014 Category % Discount Base Discount Payment on Dispatch Warranty Stockist Discount 17% 5% 2% 2% Base Discount A base discount of 17% is given to all Dealers. Payment on Dispatch Discount Payment is to be received prior to goods leaving Simplicity Australia, unless otherwise negotiated. If payment is still not received within seven working days of the date of dispatch / invoice, this discount will be withdrawn and wholegoods will be re-invoiced less 5%. Warranty Discount An extra 2% discount is given when the Dealer carries the labour content of the Warranty Claim. All parts will be supplied as per the terms and conditions of the Warranty Policy and Procedures document. This document is available on request from Simplicity Australia. Stockist Discount To be entitled to this discount of 2%, an Air Seeder must be purchased and paid for in full between 1st June and 30th September of the same financial year. This extra discount will apply on all Air Seeders purchased from Simplicity Australia until 1st June the following year. If the stock Air Seeder is retailed before 30th September, then another is to be ordered for stock to retain the discount. Multi-outlet. Dealerships must have one stock machine for every two authorised outlets in order to qualify. It is requested that when a machine is ordered, it be clearly marked with Stock Machine. Simplicity Australia Tillage stockist discount is not concurrent with Air Seeders, therefore to achieve maximum discount of 26%, a Tillage Unit must be stocked within the terms listed above. Simplicity Australia Tillage will remain exempt from any Early Order Program or extra discount until further notification. 4 P age

Payment Terms Deposit Payments Once the Wholegoods Order Acknowledgement is signed and received, a deposit of approximately 10% (which is calculated from the recommended retail price) will be invoiced to the Dealer. The deposit is payable within seven days from the receipt of the invoice and the order is confirmed upon receiving this deposit. When a payment is made to Simplicity Australia, it is a requirement that remittance advice is either faxed or emailed to inform our Accounts Department of the payment please state the amount and the Invoice Number to which the payment is being made. Payment Terms Final Payments Upon dispatch of the machine the invoice will be raised and faxed to the Dealer the same day. Payment is required as per the terms of the discount structure. It is important to note that if a cheque is going to be forwarded for the payment it has to reach Simplicity Australia within the required time frame. It is preferable to EFT the payment. When a payment is made to Simplicity Australia, it is a requirement that remittance advice is either faxed or emailed to inform our Accounts Department of the payment please state the amount and the Serial Number to which the payment is being made. Dispatch Document The Dispatch Document will be sent to all Dealers with the final invoice. It details all componentry dispatched with the Air Seeder / Cultivator. This should be checked for any discrepancies and brought to Simplicity Australia s attention within the 21 day period. SPOT Bookings $5,000.00 each Simplicity Australia has a system in place in which a Dealership can book a build position in which a Seeder/Cultivator can be built. Simplicity Australia will issue a delivery date via an Order Confirmation for this booking as close as possible to the date requested. The deposit of $5,000.00 must be received by Simplicity Australia within 5 working days upon receipt of the Order Confirmation. Contained with the Order Confirmation is the date which the details are due. Upon the expiry of this date details for the Seeder build will be requested. If then details cannot be given Simplicity Australia reserves the right to cancel the SPOT Booking and retain the $5,000.00 SPOT Booking fee For EFT payments, our bank account details are as follows: Bank: Branch: Account Number: Commonwealth Bank of Australia 064412 (Dalby) 10026499 The remittance advice for deposits and final payments can be faxed (07 4660 6030) or emailed (salesadmin@simplicityaus.com.au) 5 P age

Phone: Fax: Spare Parts Fax: 07 4660 6000 07 4660 6030 07 4660 6033 Address: PO Box 267 DALBY QLD 4405 CONTACTS Sales Manager - cameronjordan@simplicityaus.com.au 0438 193 790 Sales and Service Cameron Jordan - Representative Doug Campbell dougcampbell@simplicityaus.com.au 0429 193 790 Sales Secretary - salesadmin@simplicityaus.com.au (07) 4660 6000 General Manager - 0417 617 994 6 P age Troy Law troylaw@simplicityaus.com.au 0418 731 704 Spare Parts Manager Nicola Harber - Doug Roser dougroser@simplicityaus.com.au

Model Codes PM1 PM2 PM3 Mounted on the pull, one bin Mounted on the pull, two bins Mounted on the pull, three bins FM1 FM2 Mounted on the front of the Tractor, one bin Mounted on the front of the Tractor, two bin TR1 TR2 TR3 Trailing Rear (two wheel), one bin Trailing Rear (two wheel), two bins Trailing Rear (two wheel), three bins TB2 TB3 Tow between Tractor and Cultivator, two bins Tow between Tractor and Cultivator, three bins TQC2 TQC3 4 Wheel Trailing Rear, 2 bins (Castoring) 4 Wheel Trailing Rear, 3 bins (Castoring) TQS2 TQS3 4 Wheel Trailing Rear, 2 bins (Steerable) 4 Wheel Trailing Rear, 3 bins (Steerable) TQL3 Trailing Quad with Stainless Steel Liquid Tank TQL4 Trailing Quad with Stainless Steel Liquid Tank TBL3 TBL4 Tow Between with Stainless Steel Liquid Tank Tow Between with Stainless Steel Liquid Tank 7 P age

SIMPLICITY AUSTRALIA PTY LTD List Effective 01 January 2014 *all pricing is GST Exclusive s are Australian dollars, FOT Dalby. Transport and Insurance is the responsibility of the Dealer st Castoring Quad LITRE PM1 1500 $27000 PM2 PM3 $32000 Prop l Hyd TR1 TR2 TR3 TB2 TB3 TQC2 TQC3 TQS2 KG'S TQS3 $34500 Prop l Hyd 2500 $43000 4500 $44600 $41500 1500 $42500 1875 Prop l Hyd $52000 $54000 WHEAT 1125 Prop l Hyd 3000 6000 FM2 $31500 2000 5000 FM1 Steerable Quad $61000 $66500 $58800 $72000 2250 $64500 $75500 $66700 $77700 3375 $73500 $88000 $77700 $92500 $79000 $94000 4500 $87000 $102000 $88500 $104000 Export Spec 5250 $90000 $104500 $91500 $106500 6750 $103500 $118500 9000 $120500 Export Spec 9750 $81000 1.8 to 2m Wheel Center 1.8 to 2m Wheel Center $68500 $83000 7000 Export Spec 9000 $84000 $99000 12000 $96500 $112000 Export Spec Export Spec 13000 15000 $121000 $126000 11250 17000 $128000 $131000 12750 $176000 $146000 15000 20000 1. 2. 3. 4. 5. 6. 7. $143000 All trailing and mounted models do not include tractor hydraulics or across implement hydraulic lines as standard. These will need to be ordered separately. Please refer to page 18 All machines supplied standard with heavy-duty REXROTH blower motor and weighing scales. Topcon E15 Eagle monitoring supplied as standard on all granular only seeders, all liquid machines are supplied standard with Topcon X20 Front Mounted machines are supplied standard with Proportional Hydraulic Drive Tractor clips are not supplied standard with Front Mounted Machines. If required these must be ordered and necessary details provided. Air Seeder Pull assemblies must be ordered as required.refer page 17 NB: For overseas and container sales add $350 ($385) per machine for machines up to 3000 Litre and $550 ($605) per machine for machines 4500 litre and above plus any Australian freight charges incurred in handling or dispatching containers. Any Tillage line will incur a $800 ($880) per machine. PRICES ARE RECOMMENDED RETAIL ONLY (PRICES AND SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE 8 P age

Liquid Air Seeders All Liquid Seeders Standard with: Bertalini Polypropylene Pump with Bin Agitation Topcon Zynx X20 Controller (Optional X30 Controller) Linear Actuators for full Variable Rate Control Prescription Map Software Included Simplicity s Liquid Control System All 316 Stainless Steel and Polypropylene Components 200L Clean Water Flush Tank. 2 Camlock Fill and Drain 1 Stainless Steel Delivery Camlock (Supplied with Mounted Female + Male with 1 Hose Tail) Xtra-Steer Standard (on all TQSL models) Trailing Quad Liquid Seeders (TQL) 17000 TQL3 $170,000.00 ($187,000.00) 17000 TQL4 $180,000.00 ($198,000.00) 12000L Granular / 5000L Duplex Stainless Steel Liquid Standard Tyres: 650/75Rx32 front, 800/65Rx32 rear Standard Wheel Centres: 3.0m front, 3.2m rear 13000 TQL3 $152,000.00 ($167,200.00) 13000 TQL4 $161,000.00 ($177,100.00) 9000L Granular / 4000L Duplex Stainless Steel Liquid Standard Tyres: 24.5x32 front, 30.5x32 rear Standard Wheel Centres: 3.0m front, 3.2m rear 10000 TQL3 $144,000.00 ($158,400.00) 7000L Granular / 3000L Duplex Stainless Steel Liquid Standard Tyres: 23.1x30 front, 24.5x32 rear Standard Wheel Centres: 3.0m front, 3.2m rear Tow Between Liquid Seeders (TBL) 12000 TBL3 $142,000.00 ($156,200.00) 8000L Granular / 4000L Duplex Stainless Steel Liquid Standard Tyres: 30.5x32 Standard Wheel Centres: 3.2m rear 9 P age

17000 TBL3 $176,500.00 ($194,150.00) 17000 TBL4 $186,000.00 ($204,600.00) 12000L Granular / 5000L Duplex Stainless Steel Liquid Standard Tyres: 600/70Rx34 Duals 20000 TBL3 $200,000.00 ($220,000.00) 13000L Granular / 7000L Duplex Stainless Steel Liquid Standard Tyres: 600/70Rx34 Duals New Machine for 2014 Some options may not yet be available for this model. For more information contact Simplicity Australia. Liquid Air Seeder Options Dual Agitator $820.00 ($902.00) Dosatron Trace Element Injection Initial Dosatron w/- 200L Tank $4,600.00 ($5,060.00) Additional Dosatron w/- 100L Tank $4,100.00 ($4,510.00) NB: Tow Between liquids can only be fitted with a maximum of one (1) Dosatron Liquid Distribution Kits Liquid Distribution Kits consist of a series of manifolds which divide the primary flow provided by the seeder equally to each tyne. Following the manifolds individual outlet kits control the flow and subsequent backpressure product at each tyne. Important - When pricing liquid distribution kits it is important to include both the manifold kit and the required number of terminal outlet kits. Example A single fold bar with 40 tynes would require: $4900 3 manifold kit $2600 40 x $65 =$7500 Total kit price excluding GST 10 P a g e

Manifold Systems 3 Manifold Kit (199003000) Up to 60 Outlet Kit for Single fold Bars 4 Manifold Kit (199004000) Up to 80 Outlet Kit for Single fold Bars 5 Manifold Kit (199005000) Up to 100 Outlet for Double fold Bars $4,900.00 ($5,390.00) $5,300.00 ($5,830.00) $6,000.00 ($6,600.00) Liquid Terminal Outlet Kits $65.00 ($71.50) There are now 5 different terminal outlet configurations available. All terminal configurations include in-line check valves for fast shutoff and start-up and include a range of line meters (excludes 199009016). All connections are push-fit for simple assembly and maintenance. Stainless steel delivery tubes shown for illustration purposes only not included with terminal assemblies 199009016 LQS-ATFB 199009012 LQS-ATL4 199009014 LQS-ATL4X 199009010 LQS-ATST 199009008 LQS-ATHR 199009016 - Low Volume FIBP: Permits large bore/ultra-low application. Ability to apply difficult materials. No Line meter is used with this option as back pressure is created via line friction-the longer the line the higher the back pressure. Fits to 3/8 (9.53mm) OD x 1/4 (6.2.7mm) ID stainless steel delivery tube. 199009012 - Low Rate 4mm: Suitable for rates up to 100L/Ha, 10 US Gal/Acre on 9-12 Spacing. Fits to 6.35mm (1/4 ) OD x 4.53mm ID stainless steel delivery tube. 199009014 - Low Rate 4mm Extended: Extended version of ATL4 configured to raise the position of check valve & line meter to avoid stubble damage. Fits to 6.35mm (1/4 ) OD x 4.53mm ID stainless steel delivery tube. 199009010 - Standard: Good stream control across a wide range of application rates. For openers spaced 9-15. Fits to 3/8 (9.53mm) OD x 1/4 (6.27mm) ID stainless steel delivery tube. 19900908 - High Rate: Suited for high rate applications or points with 1 4 liquid delivery tubes. Fits to 1/4 (6.35mm) OD stainless steel delivery tube. 11 P a g e

Air Seeder Options Seeding Kits Seeding Kit per Outlet $100.00 ($110.00) Example: If a customer wishes to order a seeding kit for a 55 tyne implement and to place seed and fertilizer into a single seed boot on each tyne. Seeding Kit RRP = 55 x $100 = $5,500 plus GST IMPORTANT NOTE: FITMENT OF NON-GENUINE SEED DISTRIBUTION KITS WILL VOID BLOWER WARRANTY AND CAN HAVE ADVERSE AFFECTS ON SEEDER PERFORMANCE All seeding kits are fitted with stainless steel heads and Simplicity s own smooth bore hose. Standard Seeding Kits include primary dividers, secondary heads, mounting components etc and the following quantity of seeding hose: 31.5 mm 45 or 50 mm 76 mm 2m per planting outlet 5m per secondary head 5m per primary divider N.B. For bars larger than 12m it is advisable to order extra hose to cover the greater bar width Direct Feed Seeding Kits do not use primary dividers but rather run 3 hose directly from the Air Seeder to the 2 ½ Direct Feed Heads. 31.5 mm 76 mm 2m per planting outlet 10m per direct feed head Additional hose can be purchased as required at the following prices, however, please note that hose is only sold in 20 meter rolls Simplicity Smooth Bore Hose 31.5 mm (109500032) 45 mm (109500045) 50 mm (109500051) 76 mm (109500076) Simplicity Extra Stiff Terminal Hose (white) 32 mm (109610032) $ 7.20 / meter ($ 7.92) $ 8.50 / meter ($ 9.35) $15.00 / meter ($16.50) $17.00 / meter ($18.70) $24.00 / meter ($26.40) Double Shoot Seeding Kits If a seeding kit is required for a traditional double shoot requirement, simply total the number of outlets required for both shoots and multiply by the cost per outlet listed above Example: If a customer wishes to order a seeding kit for a 55 tyne implement and wishes to place seed and fertilizer into 2 separate seed boots on each tyne. Seeding Kit RRP = (55 x 2) x $100 = $11,000 plus GST XTRA-Steer Standard on all Steerable quads from 15,000 litres up and all TQS Liquid Seeders, the XTRA-Steer front axle reduces the seeders turning circle by 25%. Available as an option on smaller steerable quads (6/9/12,000 litres) where tight turning is required, a 25% tighter turning circle is achieved when compared to the standard axle. XTRA-Steer Option 12 P a g e $2,750.00 ($3,025.00)

8 Way Metering Units Optional on all Seeders 6000 Litres and above, 8 way metering units increase the Seeders delivery capacity up to a potential 8 tonnes per hour. 8 Way Metering Unit Option - (Per Bin) $1,500.00 ($1,650.00) Stainless Steel Metering Units When ordered as a factory fitted upgrade with the purchase of a new Seeder (prices are per metering unit and in lieu of standard mild steel metering units) 4 way metering Unit 6 way metering Unit 8 way metering Unit $ 2,000.00 ($2,200.00) $ 2,500.00 ($2,750.00) $ 3,500.00 ($3,850.00) Small Seeds Box A 225L small seeds box is available as an option on all 4500LT and smaller models. All small seeds boxes are supplied with a single primary outlet 200 L (3000L models only) 225 L (4500L models only) 300 L (6000L models only) 400 L (7000L models only) 450 L (9000L models only) 600 L (12/15/17000L models) 800 L (20000L models only) $5,800.00 ($6,380.00) each $6,000.00 ($6,600.00) each $7,200.00 ($7,920.00) each $7,800.00 ($8,580.00) each $8,300.00 ($9,130.00) each $9,100.00 ($10,010.00) each $9,600.00 ($10,560.00) each Dual outlet metering unit $400.00 ($440.00) each Add extra on above prices (Dual Outlet possibly required when more than 36 outlets are required) Small Seeds Box Monitoring (290000800) $450.00 ($495.00) NEW As standard small seeds boxes do not come with monitoring. Kit includes shaft (rate) sensing and low bin level sensor. Spray Boot (284000000) $35.00 ($38.50) each A small seeds spray boot is available, this broadcasts from the front or rear of the machine and covers approximately 650mm when spraying small seeds and 500mm when spreading fertilizer Small Seeds Box Injection Kit A separate seeding kit is required for the distribution of small seeds; the injection kit allows product from the small seeds box to be directed back into the main seeding kit at the outlet of each primary divider 6 way injection kit 8 way injection kit 9 way injection kit $ 790.00 ($869.00) $ 1000.00 ($1,100.00) $1,150.00 ($1,265.00) 13 P a g e

4 Inlet Simplicity Diffuser (289432007) $200.00 ($220.00) each Diffusers are used to apply varying rates of product through a limited number of outlets. They are also convenient for use in row cropping for quick change from, for example, thirty-two (32) rows for winter crop to eight (8) rows for summer crop, using eight, four way diffusers. In this instance, the diffusers have four inlets and one outlet. The air and seed / fertiliser enters the diffuser through the four inlets, most of the air is released to the atmosphere through the cap and the seed / fertiliser falls to the ground at low velocity (Stainless Steel) Camlocks 3 Camlock breakaways can be purchased for an extra break away on the implement. All Air Seeders (except PM & FM Series) come standard with one set Male (w/- tail) (280000276) Female (w/- tail) (280000176) Plug (108000075) 4 Way Camlock mounted assembly 6 Way Camlock mounted assembly 8 Way Camlock mounted assembly $35.00 ($38.50) $45.00 ($49.50) $15.00 ($16.50) $400.00 ($440.00) $600.00 ($660.00) $800.00 ($880.00) NB: The Camlock assemblies is the same as those used on the Air Seeders and includes Male (w/- tail) & plugs Wheel Centres (All prices are to be added to the price listed on page 8 of this price book. Ensure details are listed clearly on order and noted on Order Acknowledgement machines listed as 2 meter centres are in some cases 2.1m. If exactly 2m is required please consult Simplicity Australia as to what may be required) 1500, 3000 and 4500 litre models: Supplied standard on 2 meter centres. Available on 3 meter wheel centres as an option $500.00 ($550.00) 6000 and 9000 litre models: Supplied standard on 3 meter centres. Available on 2 meter wheel centres if required as an option $3,000.00 ($3,300.00) 12000, 13000, 15000 and 17000 litre models: Supplied standard with 3 meter front and 3.2 meter rear wheel centres. Some models can be supplied on a 3 meter wheel centre. Consult Simplicity Australia for further details No Charge LED Lighting Kits Suit E15 Eagle (Controller : 289000201) (Monitor : 289000200) $1,050.00 ($1,155.00) Includes two high powered LED lamps mounted on top of bin for loading. A light is also fitted at ground level for calibration. Lights are operated from cab of tractor through the lights switch on the Eagle. Each lamp contains 8 high powered LED s to give an exceptional amount of light with very low current draw. Suit X20/30 (289000100) $1,500.00 ($1,650.00) Includes two high powered LED lamps mounted on top of bin for loading. Another light is also fitted at ground level for calibration. Lights are operated from the tractor cab through a switchbox. Each lamp contains 8 high powered LED s to give an exceptional amount of light with very low current draw. 14 P a g e

Load/Unload Augers A 150mm (6 ) hydraulic load/unload Auger is available on 4500 litre models and smaller. (Excluding Pull Mount (PM) series) $6,500.00 ($7,150.00 A 200mm (8 ) hydraulic load/unload Auger is available on 6000 litre models through to 12000 litre models $8,000.00 ($8,800.00) A 230mm (9 ) hydraulic Auger is available on 10000, 13000, 15000 and 17000 litre models $9,000.00 ($9,900.00) Augers are load only on all Trailed Rear (TR) model Air Seeders. Consult Simplicity Australia before fitting Auger to 6000 TB Models Augers are fitted standard on the right hand side or calibration side of the Air Seeder except for Tow Between seeders which have a standard LEFT HAND Auger Auger/Tubulator Ready Kit $550.00 ($605.00) For Stock units or Seeders that are to be fitted with an aftermarket Tubulator (conveyor), an Auger ready Kit can be fitted ex Factory. This kit includes the 6-Bolt diverter valve and associated hydraulic fittings. Tractor Clips $2,750.00 ($3,025.00) Tractor clips are available to suit most common tractors. Tractor clips are not supplied with FM Air Seeder and need to be ordered separately. The standard tractor clip provides an approximate clearance between the ground and the underside of the front bumper of 600mm. Tractor clips plus 100mm (700mm clearance) or plus 200mm (800mm clearance) are available on request. The tractor make and model along with the clearance required, (i.e. standard, plus 100 or plus 200) must be specified at the time of ordering Jack Kit for FM Seeders (235202000) $700.00 ($770.00) Three jacks can be supplied to simplify the coupling and uncoupling of the Front Mounted Air Seeder from the front of the tractor. Provision is made on the Front Mount chassis for these, including a stowage position Harrow Hitch $950.00 ($1045.00) A bolt on hitch is available on the all trailing models for pulling harrows, prickle chains, etc up to a 50 horsepower requirement. All Harrow Hitches come with a 1 connection pin NB: Do not attach cultivator to this hitch and it is not suitable for tow between models 15 P a g e

On Board Calibration Display NEW To assist in calibrating the seeder from a single point scales sets are available for all seeders running the E15 Eagle Screen. Kits include water/weather proof mounted on seeder display, calibration bag with in-built weigh cells and the required harness set for plugging in and using the Eagle screen at the seeder for the purpose of calibration. Eagle Monitor (Standard Ground Drive) Supplied with new seeder $1,540.00 ($1,694.00) (in lieu of standard calibration tub and scales) Retro Fit Kit $1,940.00 ($2,134.00) Eagle Controller (Linear, Proportional Hydraulic & Electric) Supplied with new seeder $1,210.00 ($1,331.00) (in lieu of standard calibration tub and scales) Retro Fit Kit $1,610.00 ($1,771.00) Simplicity Camera Monitoring Kits NEW Don t settle for aftermarket camera kits purchased from a nameless supplier. Simplicity now offer camera kits tailored to our seeders. With the highest quality integrated wiring and a range of camera mount position options integrated you don t have to go anywhere else for camera systems. Screen Features: 9 inch resistive touch screen for simple camera switching and view changes. 4 Camera display capability with individual camera naming Up to 12 hours of video recording via 32gb SD card (not supplied) Camera Features Wide 130 degree lens angle Automatic white balance adjusting Automatic IR engagement and adjustment 4 Camera Kit 8 Camera Kit 12 Camera Kit $4,100.00 ($4,510.00) $6,600.00 ($7,260.00) $9,200.00 ($10,120.00) s above are for factory fitted kits with cameras mounted in owner specified positions (many positions are catered for but may have restrictions or limitations). Wiring is fully integrated and fitted. Internal bin cameras are fitted in the bins with adjustable mounting, wiring into bins is fully sealed using waterproof, airtight rotary seals. Warranty on all components is 12 months from date of installation and as per the Simplicity Warranty policy. 16 P a g e

Weighing Scales (116503080) $750.00 ($825.00) each Electronic pad scales with a hand held digital read out. Operating on a 9 Volt battery and weighing up to a maximum of 120kgs. These scales are supplied standard on all Simplicity Air Seeders Calibration Tubs To assist in catching and weighing product metered out during calibration, Simplicity offers custom made calibration tubs. Black To suit 4 outlet metering units Yellow - Heavy Duty To suit 6 and 8 Outlet metering units Wing Shut Off $45.00 ($49.50) $200.00 ($220.00) An electronic kit is available which allows the operator to stop material from being delivered to the wings of the implement 1 BIN $3,300.00 ($3,630.00) 2 BIN $4,100.00 ($4,510.00) 3 BIN $5,000.00 ($5,500.00) NB: Applies only in special applications. Recommend consulting Simplicity Australia before confirming order Bin Isolation Clutch This allows metering units to be turned off individually from the tractor cab. 1 Bin, 2 Bin and 3 Bin clutches are fitted with a control box using L.E.D lights to monitor 1 BIN $1,900.00 ($2,090.00) 2 BIN $2,475.00 ($2,722.50 3 BIN $3,000.00 ($3,300.00) Lever Quick Release Couplers (9500-4) $480.00 ($528.00) per Set On TB models, quick release couplings, which can be hooked up under pressure, can be provided for cultivator hydraulic lines in place of standard quick release couplers. Each coupler comes as a set of 2 (will handle 2 hydraulic lines a pressure and a return) Additional Couplers (296000001) $800.00 ($880.00) per Set Tow Between (TB) units come with 2 sets of remotes as standard fitted through the chassis of the seeder to allow for cultivator hydraulic requirements. Should a specific cultivator require additional sets add as required 17 P a g e

Trailing (TQ & TR) Seeder Pull Options Please note no pull assembly is supplied with Castoring Quad (TQC) as standard fitment and as such must be specified at point of order Adjustable A-Frame Hitch to suit TQC (305100200) $3,900.00 ($4,290.00) This is a universal A-Frame hitch designed to adjust for mounting in different positions for varying obstructions on a majority of cultivator frames. It is advisable to obtain detailed dimensions from Simplicity Australia prior to ordering to verify its suitability. If A-Frame is to be supplied for any Simplicity manufactured tillage product, deduct $500 from the above listed Retail A-Frame with Mount Plates to suit TQC $2,750.00 ($3,025.00) Included with the A-Frame hitch are mount plates and attachment hardware designed to fit the bars with 4 or 6 inch RHS. To ensure fitting compatibility it is advisable to obtain detailed dimensions from Simplicity Australia prior to ordering. Bare Simplicity A-Frame to suit TQC $2,250.00 ($2,475.00) Simplicity s own A-Frame supplied with linkage ball attachment ends. Bar end mounting hardware not supplied. Stiff Bar & Chain to suit TQC (233261005) $2,000.00 ($2,200.00) Stiff Bar & Chain pull kits are a cost effective option for TQC seeders. This assembly easily adapts to various cultivators through its simple means of adjustment so as to avoid obstructions. (Not suitable for high speed, excessively hilly conditions or continued rough operation on larger TQC seeders) Steerable Quad Hitch Extension Frame POA An additional frame can be supplied to mount the Air Seeder connection point rear of the back bar to avoid the front tyres from contacting harrows and / or press wheels. Accurate measurements will be required by Simplicity Australia to manufacture Trailed Rear Hitch Extension Frame POA An additional frame can be supplied to mount the Air Seeder connection point rear of the back bar to avoid the possibility that Air Seeder may contact the harrows and / or press wheels. Accurate measurements will be required by Simplicity Australia to manufacture. As the TR Air Seeder transfers load into the rear of the cultivator, consideration should be given to the additional load transfer that may be applied to the Cultivator with regard to required hitch length 18 P a g e

Tractor Hydraulics $220.00 ($242.00) The tractor hydraulic kit comprises of quick release couplings and fittings required to fit the Air Seeder hydraulic system requirements to the specified tractor. Across Implement Hydraulic Lines as Listed Below Across implement hydraulic kit consists of hydraulic lines and fittings required to operate Air Seeder blower and auger hydraulic motors. This kit is not required for Tow Between (TB) and Pull Mounted (PM) models. Front mount (FM) Air Seeders require 6.5 metre lines. All across machine hydraulics are provided with field fit fittings for one end so they can be cut to length. Rexroth HD 6.5 M FM Only 10 M 15 M 20 M $700.00 ($770.00) $750.00 ($825.00) $1000.00 ($1100.00) $1200.00 ($1320.00) Dual Blower Liquid $1200.00 ($1320.00) $1400.00 ($1540.00) $1600.00 ($1760.00) $2000.00 ($2200.00) Blower Specs & Formulae Simplicity s standard Rexroth motor is a 12cc motor and requires an average of 30 to 60 litres / minute to operate at 2500 to 5000 rpm and can handle a maximum of 6000 P.S.I. It is important for smooth operation that this required flow is supplied consistently through the tractors various operations. If the air seeder fan is not given priority flow a number of problems may occur including hose blocking and/or force feeding. Rexroth blower motors operate using a case drain line, it is critical that the pressure in this line does not exceed 45 P.S.I. to avoid seal damage. With regard to capacities, each 3 primary line from Simplicity Air Seeder is rated at moving a maximum of 1 tonne of product per hour. (Possible only if the seeding kit is setup correctly and within Simplicity s guidelines see dealer login section www.simplicityaus.com.au for seeding kit setup guide) Formula for calculating tonnes of product per hour: Planting width (Metres) x speed (km/h) x planting rate (kg/ha = Tonnes per hour 10 000 Example: 15m x 8 km/h x 100 kg/ha 10 000 = 1.2 Tonnes per hour 19 P a g e

Blower Types and Options Rexroth Blower Motor STANDARD A heavy duty hydraulic blower drive with a pressure filter and service indicator. Standard fitment on all models. It is a 12 cc hydraulic motor that requires up to 60 litres of oil per minute to achieve the maximum of 5000 RPM. Dual Blower POA In some cases where high application rates are required a dual blower option can be supplied (not easily retro fitted). Dual Blower s are not standard and only suitable when all primary lines are used with an absolute minimum of 120 outlets. Dual blower systems require a very large volume of oil to run effectively (up to 120lpm) and can in some cases have adverse effects if seeding kits are not suitable. In most cases maximum capacity can be achieved using a single blower and 8 outlet metering. It is recommended that prior consultation with Simplicity Staff be sort prior to quoting this option 20 P a g e

Monitors and Controller Options Topcon E15 Eagle Supplied as standard to all Granular only Seeders (Ground Drive, Linear Actuator, Proportional Hydraulic and Electric Drive). Monitors up to four shafts, four low bin level sensors, air pressure, fan rpm, ground speed, total area and sub areas. Clutch switch built into monitor. Shows output rate of each bin on a one screen display. With Linear Actuators, Proportional Hydraulic or Electric Drive rate changes are provided via a touch of a button to increase or decrease rate. Can be ground speed related using a wheel sensor, with gps input or in some cases directly coupled to tractors radar system. The E15 also has additional switches to connect lights and auxiliary components Topcon Eagle is not GPS compatible (for position), but when required can be configured to receive a GPS input for speed display. Topcon ZYNX X20 Standard fitment on all liquid models - Optional for all linear actuator, proportional hydraulic or electric drive units. Monitors all shafts, low bin levels, air pressure, ground speed, fan RPM, total areas, 9 subtotal areas and is fully GPS compatible via a Microsoft XP based program. Featuring a 8.4 inch colour touch screen with audio and visual alarm system, the Zynx X20 provides easy rate changes either manually or via GPS signals. The ZYNX X20 is capable of being used for seed rate control, header height controller, spray rate controller and auto hitch control. The ZYNX X20 can be also upgraded to provide steering assistance through an easy to follow guidance line. The ZYNX X20 comes standard with a multilayer seed rate controlling software which normally would retail as an option for $800. Please refer to page 22 for price details on ZYNX X20 Topcon X30 Simplicity is proud to partner with Topcon in their latest release, the X30. With a bright, high resolution, 12.1 multi-touch display, still easily readable in bright sunlight. A thin-profile console with an IP67 rating the X30 is built to withstand the harshest farming conditions including rain and dust. Key Features: Mini-view windows with drag-and-drop positioning Interaction keypads with expandable menus Dashboard readouts provide constant, convenient basic data Integrated LED light bar for manual guidance Full-screen views available for more detailed information Advanced setup wizard provides simple icon based setup control The Topcon X30 has been designed as the premier option for those seeking the ultimate in rate application control. Capable of conducting variable rate for up to 8 products with a host of data management options and job export options the X30 will satisfy the needs of those looking for job to job and year to year tracking to the finest of levels. GPS options for maping, data logging and auto steer out to RTK precision options are all available with the X30 system. 21 P a g e

X20 External Switch Box (116101260) $800.00 ($880.00) This is a simple switch box which allows the operator to use all operating functions of the Zynx without the need to use the touch screen. X20 External Master Switch (116900601) $150.00 ($165.00) This switch allows the operator to control the clutch only without the need to use the touch screen X20 Guidance Software $1,700.00 ($1,870.00) This Software is available as an option for connection to an external DGPS, for visual guidance and mapping abilities Topcon Tillage Switch Kit (MDECU) (116902211) $600.00 ($660.00) This switch acts as a remote master switch controlled by the raising and lowering of the cultivator, removing the possibility of forgetting to engage the Air Seeder clutch after turning. Topcon Tillage Switch Kit (Monitor) (116903884) $850.00 ($935.00) This switch acts as a remote master switch controlled by the raising and lowering of the cultivator, removing the possibility of forgetting to engage the Air Seeder clutch after turning. Topcon Blocked Head Monitor (116500796) $3,800.00 ($4,180.00) Additional monitor that will light up which sensor is affected. Comes with 5 head sensors and harness to suit. Additional head sensors to a maximum of 18 sensors. Head Sensor is mounted in a terminal hose running from the secondary head to the boot for each head monitored Head Sensors max 18 (116500022) Topcon Eagle Blocked Head Sensor Kit (116503104) $480.00 ($528.00) ea $2,900.00 ($3,190.00) This kit includes 5 head sensors and all wiring required. It connects directly into the Eagle console. It is only applicable with Eagle consoles loaded with a version of software later 2-00 - 01. All current build Air seeders are loaded with correct software for this option Head Sensors max 18 (116500022) 22 P a g e $480.00 ($528.00) ea

Monitoring / Drive Type Linear Actuator Variable Rate Control Variable rate is available via controlling the Zero-max gearbox with Linear Actuators; the advantage of this system is that all the ground drive equipment remains on the Air Seeder as a back-up system. The Linear system is compatible with prescription rate control Proportional Hydraulic Drive Mounted Models Ground speed related via a GPS receiver (supplied with system), this drive is used because of its ease of rate adjustment. Seeding rate can be monitored and adjusted from the tractor cabin. System has full manual over-ride and is pressure compensating Electric Drive Mounted / Non Mounted Models Ground speed related via tractor radar or sensor on wheel, each motor can draw up to 20 AMPS. This drive is used because of its ease of rate adjustment. Seeding rate can be monitored and adjusted from the tractor cabin and is GPS compatible if used with a ZYNX monitoring system Non-Ground Speed Relative Hydraulic Drive This form of hydraulic drive is the most basic form of hydraulic drive available. As the seeder itself has no electronic control and there is no relationship to ground speed. This form of drive would need to be adjusted as the viscosity of the oil changes (as it heats up). In most cases today this form of drive is unsuitable to cater for broadacre farming. If a basic application is necessary, this may be suitable, consultation with Simplicity Australia would be recommended. Drop Wheel Drive A ground speed related drive. Comprising of a small wheel connected to the seeder drive which is designed to come into contact with the ground when metering is required. This is not recommended for rough or furrowed conditions NB: Only available as option on PM models Wheel on Wheel Drive Also a ground speed related drive, the Air Seeder drive wheel drops onto the cultivator wheel to engage the drive. When the cultivator is raised the wheel normally automatically disengages. When using this system, it is the responsibility of the dealer to provide detailed drawings of the cultivator prior to manufacture. A further charge of $250.00 ($275.00) will apply when Simplicity Australia is required to measure and fit this drive and the cultivator must be delivered to factory NB: Standard on PM models. To delete the drop wheel or wheel on wheel option from the PM Series, deduct $300 off the GST Exclusive Retail Value 23 P a g e

Pricing / Drive Options Linear Actuator Model Topcon E15 Eagle Zynx X20/X30 2 Bin Linear $6,700.00 $17,200.00 3 Bin Linear $7,900.00 $18,400.00 Note: That all prices are in lieu of standard KEE Eagle monitor included in standard unit Electric Drive Model FM1 1500/2000 FM2 2000/2500 PM1 1500 Topcon Eagle 2 bin 3 bin No Charge No Charge $4,400 Single Bin Zynx X20/X30 2 bin 3 bin $10,500 $10,500 $14,900 PM2 3000/4500 $5,100 $16,600 PM3 4500 $5,900 $16,400 TQ/TR 4500 litres $5,500 $6,300 $16,000 $16,800 TB 4500 litres $5,200 $6,000 $15,700 $16,500 TQ/TR > 4500 litres $5,100 $5,800 $15,600 $16,300 TB > 4500 litres $4,800 $5,600 $15,300 16,100 Note: That all prices are in lieu of standard monitor included in standard unit Small Seeds Box option add $ 3,000.00 ($3,300.00) to any of the above listed Proportional Hydraulic Drive Topcon Eagle Topcon Zynx X20/X30 Standard $10,500.00 Standard $10,500.00 $4,400.00 $14,900.00 PM2 3000/4500 $4,600.00 $15,100.00 PM3 4500 $5,800.00 $16,300.00 Model FM1 1500/2000 FM2 2000/2500 PM1 1500 Note: That all prices are in lieu of standard monitor provided with specific model Small Seeds Box option add $ 3,000.00 ($3,300.00) to any of the above listed *all pricing is GST Exclusive 24 P a g e

34. Tyre Specification & Options STANDARD MODEL TYRE FRONT RIM FRONT 1500 TR1 3000 TR2 4500 TQC 10.5/80 x 18 10 PLY 9 X 18 : 6 STUD 4500 TR 4500 TR 2m 4500 TB 6000 TQS TYRE REAR RIM REAR OPTIONS PRICE TYRE (GST INC) REAR TYRE FRONT RIM FRONT RIM REAR PRICE (GST INC) 18.4 X 30 8 PLY 15 X 30: 23.1 X 30 8 PLY 20 X 30: 23.1 X 26 12 PLY 20 X 26: $1900.00 ($2090.00) 23.1 X 30 8 PLY 20 X 30: $1600.00 ($1760.00) $1600.00 ($1760.00) 15.5/80 x 24 12 PLY 15.5/80 x 24 12 PLY 15.5/80 x 24 12 PLY 18.4 x 30 8 PLY 15.5/80 x 24: 12 PLY 12 X 24: 6 STUD 12 X 24: 6 STUD 12 X 24: 6 STUD 15 X 30: 8 STUD 12 X 24: 6 STUD 18.4 X 26 12 PLY 16 X 26: 8 STUD 15.5/80 24 12 PLY 12 X 24: 6 STUD 18.4 X 30 8 PLY 15 X 30: 8 STUD 18.4 X 30 15 X 30: 8 STUD 6000 TQC 15.5/80 24 12 PLY 12 X 24: 6 STUD 18.4 X 30 8 PLY 15 X 30: 8STUD 23.1 X 30 8 PLY 20 X 30: 6000 TQC 2m 15.5/80 24 12 PLY 12 X 24: 6 STUD 18.4 X 30 8 PLY 15 X 30: 8 STUD 6000 TR 18.4 X 30 8 PLY 15 X 30: 8 STUD 23.1 X 30 8 PLY 20 X 30: $1600.00 ($1760.00) 18.4 X 26 12 PLY 16 X 26 23.1 X 26 12 PLY 20 X 26 $2900.00 ($3190.00) 24.5 X 32 10 PLY 21 X 32 $2500.00 ($2750.00) $2500.00 ($2750.00) 6000 TB $1520.00 ($1672.00) 9000 TQS 18.4 X 30 12 PLY 16 X 30 23.1 X 30 10 PLY 20 X 30 23.1 X 30 8 PLY 20 X 30 9000 TQC 15.5/80 X 24 : 12 PLY 12 X 24 6 STUD 23.1 X 30 10 PLY 20 X 30 24.5 X 32 10 PLY 21 X 32 9000 TQC 2m 15.5/80 X 24 : 12 PLY 12 X 24 6 STUD 18.4 X 30 8 PLY 20 X 30 NB: Other Tyre options are available upon request $1560.00 ($1716.00) $2450.00 ($2695.00) $4300.00 ($4620.00) $ POA 25 P a g e

STANDARD RIM TYRE FRONT REAR MODEL TYRE FRONT 9000 TB 12000 TB 12000 TQS 23.1 X 30 8 PLY 20 X 30 15000 TB 15000 TQS3 24.5 X 32 10 PLY 21 X 32 17000 TB 17000 TQS3 20000 TQS3 24.5 X 32 10 PLY 650/75R X 32 Radial 21 X 32 21 X 32 20000 TR3 20000 TB3 10000 TQL3 RIM REAR TYRE FRONT RIM FRONT 24.5 X 32 10 PLY 21 X 32 23.1 X 26 12 PLY 24.5 X 32 10 PLY 24.5 X 32 10 PLY 750/60 X 30.5 Radial 30.5 X 32 12 PLY 750/60 X 30.5 Radial 30.5 X 32 12 PLY 800/65R X 32 Radial 800/65R X 32 Radial 20 X 26 21 X 32 10 STUD 21 X 32 24 X 30.5 10 STUD 27 X 32 10 STUD 24 X 30.5 10 STUD 27 X 32 10 STUD 27 X 32 10 STUD 27 X 32 12 STUD 650/75R X 32 Radial 21 X 32 650/75R X 32 Radial 21 X 32 Dual 600/70R34 13000 TQL 23.1 X 30 8 PLY 24.5 X 32 10 PLY 21 X 30 21 X 32 17000 TQL 650/75R X 32 Radial 12000 TBL3 OPTIONS PRICE TYRE (GST INC) REAR RIM REAR PRICE (GST INC) 30.5 X 32 12 PLY 30.5 X 32 12 PLY 27 X 32 10 STUD 27 X 32 10 STUD 800/65R X 32 Radial Dual 30.5 X 32 800/65R X 32 Radial 27 X 32 10 STUD 27 X 32 12 STUD 27 X 32 10 STUD 20 X 34 12 STUD Dual 30.5 X 32 27 X 32 12 STUD POA 24.5 X 32 10 PLY 30.5 X 32 12 PLY 27 X 32 27 X 32 10 STUD 24.5 X 32 10 PLY 650/75R X 32 Radial 21 X 32 21 X 32 30.5 X 32 12 PLY 800/65R X 32 Radial 27 X 32 10 STUD 27 X 32 10 STUD $1600.00 ($1760.00) $4400.00 ($4840.00) 21 X 32 800/65R X 32 Radial 27 X 32 10 STUD 30.5 X 32 12 PLY 27 X 32 10 STUD 17000 TBL 20 X 34 12 STUD 20 X 34 12 STUD 20000 TBL Dual 600/70R34 Dual 600/70R34 $2400.00 ($2640.00) $2500.00 ($2750.00) $2500.00 ($2750.00) $2400.00 ($2640.00) $2500.00 ($2750.00) NB: Other Tyre options are available upon request 26 P a g e $ POA $1650.00 ($1815.00) $1650.00 ($1815.00) $4400.00 ($4840.00) POA $4300.00 ($4730.00)

To Calculate the Hopper Split To help decide the split most suited to your application, pick the mixtures you are likely to require for the bulk of your planting and write down the application rates for each product. Convert this to litre (contact your product supplier to find the weight per litre of your product as different products and brands vary or alternatively weigh the product and determine its weight in grams per litre, this is also the Kg per 100L) and then add up the total litreage per hectare. Divide this into the litreage for each product and multiply by 100 to give the percentage capacity required by each product. Example: 60kg of grain is about 77 litres. The total capacity required is 227 litres per hectare so the percentage of the total required for grain is calculated as follows: Calculate thus, 77 227 x 100 = 33.9, a capacity of 34% of total is ideal for this grain PRODUCT KG / HA *KG / LITRE LITRE / HA % OF TOTAL NEAREST SPLIT Grain 60 0.778 77 33.9 34 Super 60 1.0 60 26.5 28 Urea 70 0.778 90 39.6 38 TOTALS 190 227 100 No. 3 *The Kg / Litre may vary for different products, the figures used are given as a guide only, you must confirm before calculating The nearest split is number 3, 38 / 34 / 28, this will ensure that all your bin compartments last approximately the same length of time This will also give you a 60 / 40 (62 / 38, by using two bins for one product) split for conventional planting if required for lupins etc 27 P a g e

Machine Dimensions MODEL FILL HEIGHT BIN LID SIZE 1500 PM1 1500 TR1 2000 FM1 2000 FM2 2500 FM2 3000 PM2 3000 TR2 3000 TQ2 4500 PM2 4500 PM3 4500 TR2 4500 TR3 4500 TB2 4500 TB3 4500 TQ2 4500 TQ3 6000 TR2 6000 TR3 6000 TB2 6000 TB3 6000 TQ2 6000 TQ3 6000 TQ2 2m 6000 TQ3 2m 7000TQS 9000 TB2 9000 TB3 9000 TQ2 9000 TQ3 9000 TQ2 2m 9000 TQ3 2m 10000 TQSL3 12000 TB2 12000 TB3 12000TBL3 12000 TQ2 12000 TQ3 13000TQ3 13000 TQL3 15000TQ3 15000TB3 17000TB3 17000 TQ3 17000 TBL3 17000 TQL3 20000TQ3 20000TR3 1700 1900 1800 1800 1900 1700 2000 2000 1900 1900 2450 2450 2450 2450 2450 2450 2600 2600 2600 2600 2600 2600 2600 2600 2800 2800 2800 2800 2800 2800 2800 2600 3050 3050 3125 3050 3050 2900 2800 2950 3125 3250 3050 3250 3050 3550 3550 500 X 500 500 X 500 500 X 500 500 X 500 500 X 500 500 X 500 500 X 500 500 X 500 500 X 500 500 X 500 500 X 500 500 X 500 500 X 500 500 X 500 500 X 500 500 X 500 500 X 500 500 X 500 500 X 500 500 X 500 500 X 500 500 X 500 500 X 500 500 X 500 500 X 1000 500 X 1000 500 X 1000 500 X 1000 500 X 1000 500 X 1000 500 X 1000 500 X 500 500 X 1000 500 X 1000 500 X 1000 500 X 1000 500 X 1000 500 X 1000 500 X 1000 500 X 1000 500 X 1000 500 X 1000 500 X 1000 500 X 1000 500 X 1000 500 X 1000 500 X 1000 BIN LID CENTRE S 1045 1045 1045 1045 1045 1355 1355 1355 1355 1355 1355 1355 1045 1500 1000 1500 1000 1500 1000 1500 1000 1000 1500 1000 1500 1000 1500 1000 1250 1500 1000 1000 1500 1000 1250 1250 1400 1400 1400 1250 1250 1250 1250 1250 GROUND CLEARANCE WHEEL CENTRE 450 2000 450 450 2000 2000 450 450 450 450 450 450 600 600 600 600 600 600 600 600 600 600 600 600 600 600 600 600 600 600 600 600 600 600 600 600 500 500 600 500 600 600 600 3000 3000 2200 2200 2000 2000 3000 3000 2600 2600 3000 3000 2000 2000 3000 3000 3000 3000 3000 2000 2000 3000 3200 3200 3000 3200 3200 3200 3200 3200 3000 3000 3200 DUALS 3200 3200 3200 OVERALL WIDTH OVERALL LENGTH 1500 2150 1500 2000 2000 2000 2700 2700 1900 1900 3700 3700 2700 2700 2700 2700 3100 3100 3100 3100 3800 3800 2450 2450 3500 3800 3800 3800 3800 2450 2450 3900 3900 3900 3900 3900 3900 3900 4000 3900 4000 4000 4000 5700 4000 4000 4000 2200 4100 2200 2450 2450 2450 6000 4700 3300 3300 6000 6000 4500 4500 5000 5000 6700 6700 5400 5550 5550 5550 6700 6700 5600 5450 5450 5700 5700 6700 6700 7200 5450 5450 5950 5700 5700 7200 7200 7200 8125 8150 7200 8350 7200 7300 7000 Notes: 1. Fill height from bottom of chassis to lid frame on all mounted models, add the height of the pull or bar to find the actual fill height 2. All specifications are calculated using standard equipment 3. Specifications are subject to change without notice 4. Tyre pressure, please consult the relevant Operators Manual 28 P a g e

Bin Split Options

Bin Split Options 6000 DOUBLE 6000 TRIPLE

Bin Split Options 9000 DOUBLE 9000 TRIPLE

Bin Split Options 12000 DOUBLE 12000 TRIPLE

Bin Split Options 7000 Double Bin 8000 Double Bin (for 12000TBL3)

Notes Notes

PRICE LIST TILLAGE EFFECTIVE 1st January 2014 PHONE: 07 4660 6000 FAX NO: 07 4660 6030 www.simplicityaus.com.au 1 P age

CONTENTS Allrounder List 308 Series Allrounder - Floating Hitch.. Allrounder Standard Features.. Cultivator Pull Lift Jack.. Dual Accumulators... Lift Circuit Lock-out Valves.. Tilt Circuit Lock-out Valves.. Tyne Pressure Gauge. Lockout Valves. Hydraulic Filtration.. 4 5 5 5 5 5 5 5 5 Allrounder Tyne Standard Features Hydraulic Tyne Cylinders Pins & Bushes.. Tyne Breakout.. Adjustable Tyne Depth. Standard Frame Features. 305 Series Pricing.. 6 6 6 6 6 7&8 Allrounder Options Shank - Drop Forged.. Shank - Series K Minimum Till Shank - Series J Minimum Till. Offset Double Shoot Pendulum Tyne Points. Seed Boots Wing Tyre Upgrade. Air Seeder Pulls and Frames... Marker Arm... Steel Across Machine Hydraulics... Wing Extensions... Wing Wheel Isolation Kit Bleed Tap Assembly... Simplicity Press Wheels...... Press Wheel Pricing.... 10 10 10 10 11 12 12 12 12 12 12 12 12 13 13 STRIKER Striker Plating Units Dual Press Wheel Option.. Double Disc Opener Dual Closing Wheel Option.. Hydraulic Manifold.. Hydraulic Accumulator.. 14&20 14 14 15 15 15 X-BAR PRICE LIST Features. Linkage Units - Single Row.. Linkage Units - Dual Row.. Trailing Units - Single Row Trailing Units - Dual Row.. Dual Row Folding 18 18 18 19 19 19 2 P age

ALLROUNDER PRICE LIST EFFECTIVE 1st January 2014 PHONE: 07 4660 6000 FAX NO: 07 4660 6030 www.simplicityaus.com.au 3 P age

308 Series Allrounder Floating Hitch (NEW) For over 15 years now Simplicity has offered the 305 Series Allrounder (Tilt Controlled Hitch), in 2012 we were pleased to release our 308 Series Floating Hitch Allrounder. Building on the strengths of over two decades of hydraulic tyne experience, the new 308 Series Allrounder has been many years in the making. The 308 Series encases all the features of the renowned 305 Series but also incorporates a mechanical floating hitch. The utilisation of a floating hitch has also resulted in Simplicity s Allrounder range growing in width, now stretching out to 20m. Though we have added more wheels, in order to keep the excellent flotation the Allrounder is recognised for we haven t reduced the tyre size. The 308 series still uses large 15.5/80x24 16ply tyres in-frame, plus a row of 12.5/80x18 front tyres (larger centre tyres on 18m and above). To reduce the number of hydraulic cylinders necessary and to ensure the hydraulic system remains simple and effective the 308 Series Allrounder uses a Cam linkage assembly from the rear wheels. This system means the front wheel assemblies don t require any hydraulics, but rather work directly off the rear wheels when raising and lowering. 308 Series Pricing 9m 9m 9m 250mm 300mm 333mm 37 tynes 31 tynes 28 tynes $146 000 $141 800 $139 700 s shown are Recommended Retail (RRP) excluding GST. All prices are subject to change without notice 12m 12m 12m 250mm 300mm 333mm 49 tynes 41 tynes 36 tynes $168 200 $162 600 $159 100 For exact transport or working widths, or option suitability contact Simplicity Australia. 18m 18m 18m 250mm 300mm 333mm 73 tynes 61 tynes 55 tynes $266 400 $258 000 $253 800 20m 20m 250mm 300mm 79 tynes 67 tynes $279 600 $265 200 As the 308 Series Allrounder is a recent line if you have enquiry for a machine not listed here please contact Simplicity Australia 4 P age

Allrounder Standard Features Wing Counter Balance Valves Standard No Charge Standard on all models fitted to the wing fold cylinders. These are a safety feature that avoids the wing from falling quickly in the event of a hydraulic failure Cultivator Pull Lift Jack Standard No Charge This option provides for easy connection and un-coupling of the cultivator. It consists of a hydraulic jack that is fitted to the cultivator s pull allowing the operator to raise or lower using the tractors remotes Dual Accumulators Standard No Charge Dual piston type accumulators are fitted to all models. These are both 9.8 litre capacity giving a total of slightly under 20 litres available. Each accumulator is pre-charged to differing gas pressures to allow for breakout ranges Lift Circuit Lock-out Valves Standard No Charge Lock-out valves are fitted standard to all models. These valves isolate the circuit from possible leakage back through the tractors remotes Tilt Circuit Lock-out Valves Standard No Charge Lock-out valves are fitted standard to all 305 series models. These valves isolate the circuit from possible leakage back through the tractors remotes. Tyne Pressure Gauge Standard No Charge This gauge measures the hydraulic pressure applied to the tyne circuit. For each 200 psi of hydraulic system pressure 100 pounds of tyne breakout is produced Lockout Valves Standard No Charge Lockout valves are contained within the block for both the tilt and lift hydraulic circuit. These lockout valves eliminate the possibility of hydraulic oil leaking back through tractor remotes when under pressure Hydraulic Filtration Standard No Charge Filters are built into the hydraulic block that reduces the possibility of contamination of hydraulic components occurring 5 P age

Allrounder Hydraulic Tyne Standard Features Hydraulic Tyne Cylinder The tyne cylinder allows the tyne to trip as required when plumbed through the accumulators. Each cylinder has balled ends which eliminates the possibility of tyne forces being transferred into the shaft of the cylinder causing seal damage Pins and Bushes Greaseable 4140 pins and bushes are fitted in all pivot points. The main tyne pivot has seals fitted that allow the grease to expel during greasing, but do not let the dust in. This dramatically improves grease function and prolongs pin and bush life. Tyne Breakout The tyne has an constant operating breakout of 100 pounds to 700 pounds adjustable via hydraulic pressure. The design of the tyne allows the tyne breakout to increase through a portion of the trip, but then decreases allowing the tyne to trip out without resulting damage Adjustable Tyne Depth Each tyne is vertically adjustable so as to allow depths of each tyne to be adjusted individually. The tyne shank is vertically adjustable a total of 80mm with four 20mm increments 305 Series Allrounder Frame - Standard Features The Allrounder frame is a 100 x 100mm fully welded five row RHS frame. The frame is manufactured using 9 mm wall thickness RHS for the centre section and 6mm RHS on the wings. The frame has wheels positioned through the centre to allow for increased ground following characteristics. Each frame can be fitted with 200mm, 250mm, 300mm and 333mm tyne spacings. This allows for changes to be quickly and easily made to the Allrounder s tyne configuration Fore and aft leveling is easily catered for via fitted tilt cylinders. These cylinders can also be fitted with ultrasonic electronic depth recognition to provide for a full floating hitch. Auto depth control can similarly be catered for using ultrasonic electronic depth recognition to control the lift circuit 6 P age

Cultivator Width Tyne Centres 6 Metre Number of Tynes 200 mm Width Specifications Cut Width Single Fold 6.20 M 250 mm 7.0M Cut Width 41 Swath Width Cut Width 45 Swath Width Cut Width 51 Swath Width 8.0 M 8.2 M 8.8 M 9.0 M 10.0 M 10.2 M 3 Metre ***3 Metre $72,500 $81,000 $93,000 $104,000 $112,500 25 29 33 37 41 Cut Width Swath Width Cut Width Swath Width Cut Width Swath Width Cut Width Swath Width Cut Width Swath Width 6.0 M 6.25 M 7.0 M 7.25 M 8.0 M 8.25 M 9.0 M 9.25 M 10.0 M 10.25 M Centre Section Wheel Centres Single Fold 2 Metre 2 Metre 2 Metre 3 Metre ***3 Metre $69,000 $77,000 $86,500 $98,000 $104,500 Number of Tynes 300 mm 6.80 M 10 Metre 2 Metre Double Fold 21 25 27 31 35 Cut Width Swath Width Cut Width Swath Width Cut Width Swath Width Cut Width Swath Width Cut Width Swath Width 6.0 M 6.30 M 7.20 M 7.50 M 7.8 M 8.1 M 9.0 M 9.3 M 10.2 M 10.5 M Centre Section Wheel Centres Single Fold 2 Metre 2 Metre 2 Metre 3 Metre ***3 Metre $66,500 $74,500 $82,000 $93,500 $100,000 Double Fold 333 mm 35 Swath Width 9 Metre 2 Metre Number of Tynes Width Specifications Cut Width 8 Metre 2 Metre Double Fold Width Specifications 31 Swath Width 6.0 M Centre Section Wheel Centres 7 Metre Number of Tynes 18 19 22 23 24 25 27 28 30 31 Width Specifications **NCT *CT *CT **NCT **NCT *CT *CT **NCT **NCT *CT Cut Width Swath Width Centre Section Wheel Centres 5.66 M 6.0 M 6.0 M 6.33 M 2 Metre 7.0 M 7.33 M 7.33 M 7.66 M 2 Metre 7.66 M 8.0 M 8.0 M 8.33 M 2 Metre 8.66 M 9.0 M 9.0 M 9.33 M 3 Metre $64,500 $65,000 $73,000 $73,500 $79,000 $80,000 $90,000 $91,000 Single Fold Double Fold 9.66 M 10.0 M 10.0 M 10.33 M ***3 Metre $95,500 $96,500 Key: CT Denotes Standard with Centre Tyne NCT Denotes No Centre Tyne Option ***3 Metre Denotes 2 metre centre wheel option avail - Please add $2500 ($2750) to Recommended Retail listed if 2 metre wheel centre option is required Cut Width Distance between the centre of outer tynes Swath Width Allows for the 'guess row' ie. Cut Width plus Tyne Spacing 7 P age

Cultivator Width Tyne Centres Centre Section Wheel Centres 11 Metre 55 Cut Width Swath Width 10.8 M 11.0 M 3 Metre 12 Metre 61 Cut Width Swath Width 12.0 M 12.2 M 3 Metre 13 Metre 65 Cut Width Swath Width 12.8 M 13.0 M 3 Metre Single Fold $122,300 $133,300 $142,800 Double Fold $141,500 Number of Tynes 200 mm Width Specifications Number of Tynes 250 mm Width Specifications 300 mm Cut Width 12.0 M 49 Swath Width 12.25 M Cut Width 13.0 M 53 Swath Width 13.25 M 57 Cut Width Swath Width 14.0 M 14.25 M 4 M Single Fold 3 M Double Fold Cut Width 15.0 M 61 Swath Width 15.25 M 3 Metre 3 Metre 3 Metre Single Fold $114,500 $124,500 $134,500 $145,000 Double Fold $140,000 $168,500 $181,500 Width Specifications Cut Width 10.8 M 37 Swath Width 11.1 M Cut Width 12.0 M 41 Swath Width 12.3 M Cut Width 13.2 M 43 Swath Width 13.5 M 47 Cut Width Swath Width 13.8 M 14.1 M 4 M Single Fold 3 M Double Fold 3 Metre Cut Width 15.0 M 51 Swath Width 15.3 M Centre Section Wheel Centres 3 Metre 3 Metre 3 Metre Single Fold $109,000 $119,000 $128,500 $139,000 Double Fold $129,000 $163,500 $175,500 Number of Tynes 333 mm 45 Swath Width 11.25 M 15 Metre Centre Section Wheel Centres Number of Tynes 3 Metre Width Specifications 33 *CT 34 **NCT 36 **NCT 37 *CT 39 47 45 Cut Width Swath Width 10.66 M 11.0 M 11.0 M 11.33 M 11.66 M 12.0 M 12.0 M 12.33 M 12.66 M 13.00 M 14.00 M 14.33 M 4 M Single Fold 3 M Double Fold 14.66 M 15.00 M Centre Section Wheel Centres Single Fold Double Fold 8 P age Cut Width 11.0 M 14 Metre 3 Metre $105,500 $106,500 3 Metre 3 Metre 3 Metre $115,500 $116,500 $124,500 $135,500 $132,000 $133,000 $160,000 $170,500

Important Terminology and Abbreviations Tyne Spacing: This is the distance between each tyne centre Cut Width: This is the actual distance between the very outside tyne shanks Swath Width: This is the working width of the unit including the guess row (ie: the cut width plus the guess row) Guess Row: This is the under lap of the unit. This distance equals one row spacing Centre Section Wheel Centres: This is the distance between the implement centre section wheels. Please note that some models are available on differing centre section wheel centres. Reference to these can be found on page 5 & 6 Outer Wing Wheel Centres: These on all single fold models are on the outer edge of the frame. (Eg: A 12m model has the outer wheels on 12m centres) Centre Tyne (CT): This indicates that the tyne layout begins with a centre tyne position, this obviously will also indicate that a uneven number of tynes is fitted, (or odd number) No Centre Tyne (NCT): This indicates that the tyne layout begins each side of the centre tyne position. This obviously will also indicate that a even number of tynes is fitted, (or even number) 9 P age

Allrounder Options All pricing listed below includes all standard items but does not include any tyne shanks or options. These must be ordered as required with each unit. Frames are suitable for all row spacing. This allows the end user to change of modify the tyne spacing should this be required. All Allrounder s are supplied less tyne shanks and as such they must be ordered as required. Simplicity currently offers 3 standard tyne options. Consideration may be given for specific tyne shank modification upon request. Shank - Drop Forged (491700260) $95.00 ($104.50) each This vertically adjustable tyne has a drop forged toe at a 47 degree angle. It measures 50mm deep and 20mm wide. It has 2 x ½ inch bolt holes suitable for tools with 1 ¾ inch to 2 ¼ inch centers. It is supplied as shown without a seeding boot or point Shank Series K Minimum Till (491700258) $110.00 ($121.00) each This tyne is vertically adjustable tyne is manufactured using a Series K point adaptor. All Simplicity Series K points can be fitted to this shank. This adaptor also suits the full range of Keech points. It has a narrow profile of 20mm x 500mm and is supplied as shown without a point or seeding boot Shank Series J Minimum Till each $170.00 ($187.00) (491700266) This tyne is designed to suit the Allrounder Tyne Housing, but is fitted with a Series J point adaptor. This tyne shank will also fit genuine Janke points. It has a narrow profile of 20mm x 50mm and includes a 32mm Seeding Boot Shank - Offset Double Shoot Pendulum $200.00 ($220.00) each An additional tyne can be mounted to the right or left of the traditional tyne shank. This allows for product to be placed a distance to the right or left of the main shank. This distance can vary depending on the tooling fitted. The tyne trips with the main assembly and pivots so as to remain vertical through the trip action, this eliminates the possibility of this tyne coming into contact with the frame when tripped fully. It is only suitable for shallow work with light tooling fitted. The listed price does not include the ground engaging tooling. Recommended that Simplicity be consulted prior to quoting 10 P a g e

Points 195000024 195000021 195000022 Point - Series J Cast w/-tungsten Tip Point - Series J Cast w/- 12mm Tungsten Front Point - Series J Cast w/- 19mm Tungsten Front Point Series J NiHard w/-tungsten Tip & Wings $28.00 each $60.00 each $99.00 each $43.00 each 195000026 Point Series J Plate Low Profile w/12mm Tungsten Tip and Tung Tuff Top 195000030 Point Series J Plate Low Profile w/12mm Tungsten Full Front Edge $97.00 each $109.00 each 195000027 195000028 Point Series J Plate Deep Profile w/- 12mm Tungsten Tip and Tung Tuff Top Point Forged Shank Cast Knife w/- 12mm Tungsten tiles. 155mm Blade Length $106.00 each 195000023 $60.00 each 497655276 497655284 Point Series K Cast Inverted Tee w/- Tungsten Point Series K Cast Inverted T w/tung Tuff $85.00 each $50.00 each Shank Assemblies shown for illustration purposes only. All point dimensions & specifications available on request. Maximum discount available on points - 25% 11 P a g e

Seed Boots $30.00 each ($33.00 each) Single shoot boots are available to suit both Drop Forged Tyne standard tyne and Minimum Till Tyne. These boots are designed for use with the Inverted T Point and standard sweep type points with respect to tyne selected. These boots may not be suitable for use with other ground tools (497655350) (PB-060) Wing Tyre Upgrade 15.5/80 x 24 (12 ply) $1650.00 ($1815.00) All Cultivators up to and including 10m widths are standard with 15.5/80 x 24 on the centre section and 10.5/80 x 18 on wing wheels. To upgrade Wing Tyre Option, please include listed price Air Seeder Pulls and Frames These frames are added so as to pull Air Seeder from correct height and length so as to avoid clashing or fouling on rear mounted items such as press wheels and harrows. Some dimensions will be required with respect to the length of these press wheels or harrows Pull to Suit TR Air Seeder (305100100) Pull to Suit TQC Air Seeder (Castoring) Pull to Suit TQS Air Seeder (Steerable) (305100100) $1800.00 ($1980.00) $3000.00 ($3300.00) $1800.00 ($1980.00) Marker Arms $9700.00 ($10,670.00) Marker arms are available to suit all single wing fold models. includes all hydraulic components required Steel Across Machine Hydraulics POA Wing Extensions POA All Simplicity Allrounder models are designed so as to fit one extra tyne to each side. Wing Extensions are available but suitability may vary with regard to tyne spacing Wing Wheel Isolation Kit $1600.00 ($1760.00) A solenoid operated valve isolates the wing wheels from the main wheel phasing system allowing them to be retracted into the frame to reduce transport width. Bleed Tap Assembly $85.00 ($93.50) A tap kit which assists in bleeding of the Allrounder tyne hydraulic manifold system. Consisting of a hydraulic tap and hose, allowing control during bleeding and for the bled oil to be easily salvaged. 12 P a g e

Simplicity Press Wheels (Option) Simplicity Press Wheels have been designed to match the Allrounder range perfectly. Tyne patterns are adjusted for use with Simplicity Press Wheels to still achieve maximum trash flow and maintain uniform field finish. Having headstock designs incorporating tyne maintenance cutouts means Simplicity Press Wheels can mount flush up against the Allrounder tynes and not hinder the operation or service of the tynes. With the addition of the Wheel Adjustment Kit and the Sowing Boot Kit the press wheel assemblies can be upgraded to produce a true ground following, double shoot seeding system. A range of press wheel styles are available, please contact Simplicity to find out more. Press Wheel Pricing Press Wheel Assy $750.00 ($825.00) Wheel Adjustment Kit $90.00 ($99.00) Scraper Kit (requires Wheel Adjustment Kit) $36.70 ($40.37) Sowing Boot kit (requires Wheel Adjustment Kit) $175.00 ($192.50) 13 P a g e

Striker Simplicity Striker Units are available for fitment to specific Allrounder models. Please contact Simplicity Australia for more details. Strikers may require manifold and/or accumulators depending on requirements. Striker Planting Units $2750.00 ($3025.00) Hydraulic ground following tools incorporating a 16 coulter with a depth wheel each side, with a narrow profile inverted T type tyne and a range of closing press wheels. Includes headstock to suit a 4 inch frame, (headstocks to suit other frame sizes are available on request), Simplicity inverted T Minimum Till Point and Single Shoot Seeding Boot Dual Press Wheel Option $575.00 ($632.50) Consists of two 300mm press wheels mounted on a walking beam for increased load share abilities Double Disc Opener (Option) $750.00 ($825.00) Consists of double 16 inch discs, heavy duty dual race sealed bearings and single shoot seed boot 14 P a g e

Dual Closing Wheel (Option) $1,575 ($1,732.50) (Check with Simplicity for discount) Suitable for moist conditions where double discs without closing wheels can peel up the top layer of soil. Hydraulic Manifold $ 200.00 each ($220.00) Includes all hydraulic components required except Accumulator Hydraulic Accumulator 1 to 8 Units 8 to 16 Units 16 or More Units $1,600 ($1,760) $2,200 ($2,420) $2,600 ($2,860) Other options may be available upon request to Simplicity Australia. These options may incur additional charges and effect normal delivery targets 15 P a g e

Notes Notes 16 P a g e

X-BAR PRICE BOOK EFFECTIVE 1st January 2014 PHONE: 07 4660 6000 FAX NO: 07 4660 6030 www.simplicityaus.com.au 17 P a g e

X-Bar List Features Unique clamping system allowing for unrestricted layouts and easy unit movement No U Bolts Single or Dual Row configurations available Linkage or Trailing Options 6 to 12 metre planting widths. Linkage Units - Single Row This consists of a single row X-Bar fitted with 3 point linkage tractor mount, depth wheels and parking stands. No hydraulics are included in this price The below listed prices are for rigid non-folding bars. Fold options can be added for an additional charge. Folding may limit some row spacings available. (POA) 6 metre 8 metre 9 metre 10 metre 12 metre $13,100.00 $16,800.00 $18,900.00 $21,000.00 $24,000.00 ($14,410.00) ($18,480.00) ($20,790.00) ($23,100.00) ($26,400.00) NB: Single Row units are only suitable for minimum row spacing of greater than 500mm Linkage Units - Dual Row This consists of two X-Bar beams fitted with three point linkage tractor mount, depth wheels, parking stands and lift assist. Hydraulics are fitted to the lift assist assembly only The below listed prices are for rigid nonfolding bars. Fold options can be added for an additional charge. Folding may limit some row spacings available. (POA) 6 metre dual row 8 metre dual row 9 metre dual row 10 metre dual row 12 metre dual row $29,000.00 ($31,950.00) $37,500.00 ($41,250.00) $41,500.00 ($45,650.00) $44,000.00 ($48,400.00) $53,000.00 ($58,300.00) NB: Dual Row units are suitable for minimum row spacing greater than 300mm 18 P a g e

Trailing Units Single Row This consists of a single X Beam complete with rigid hitch, four phasing lift wheels and a hydraulic single wing fold Hydraulics supplied for lifts and fold circuits only 12 metre 14 metre 8 metre 9 metre 10 metre $34,500.00 ($37,950.00) $37,500.00 ($41,250.00) $43,500.00 ($47,850.00) $53,000.00 ($58,300.00) $64,500.00 ($70,950.00) NB: Single Row units are only suitable for minimum row spacing of greater than 500mm NB: Folding may limit some row spacings available NB: Larger models considered upon application to Simplicity Australia Trailing Units Dual Row This consist of a dual row X beam configuration complete with floating hitch, phased lift wheels and hydraulic single wing fold Hydraulics supplied for lift and folded circuits only Please contact Simplicity Australia for Pricing on the this Trailing Unit Model NB: Dual Row units are suitable for minimum row spacing greater than 300mm. NB: Folding may limit some row spacings available. NB: Larger models considered upon application to Simplicity Australia Trailing Componentry $26,000.00 ($28,600.00) Dual Row Folding Componentry $23,000.00 ($25,300.00) 19 P a g e

Striker Striker Assemblies are available complete with X Bar Headstock Assemblies, Tyne fitted with Inverted T Point and single shoot boot and Single 50mm flat press wheel Striker $2,750 ($3,025) each Hydraulic components not including Accumulator are available. This includes manifold and all hydraulic components to connect to tractor, (excl. Accumulator.see below) Hydraulic Manifolds (per unit) $200 ($220) each Accumulators are available with reference to the number of Striker Units fitted to the Toolbar Accumulator 1 to 8 Units 8 to 16 Units 16 or More Units $1,600 ($1,760) $2,200 ($2,420) $2,600 ($2,860) Double Disc Opener $750 ea ($825) Double Disc Openers complete with single shoot Seeding Boot are available Dual Press Wheel Assembly* $575 ea ($632.50) Dual Press wheels are available to be fitted to the Striker Dual Closing Wheel (Option) $1,575 ($1,732.50) (Check with Simplicity for discount) Suitable for moist conditions where double disks without closing wheels can peel up the top layer of soil. *For Dual Closing Wheel option image see page 14 20 P a g e