Fingertight Fittings 4 One-Piece Fingertight Fittings Upchurch Scientific s original One-Piece Fingertight Fittings have 0-3 threads and are designed to be used with /6 OD tubing, except the M-645 (6-40, /3 ) and P-00 (/4-8, /8 ). The F-0 is Upchurch Scientific s most popular high pressure Fingertight. (Upchurch Scientific also manufactures two-piece Fingertight fittings with overall geometries similar to the F-0 the F-95 SealTight fitting on page 7 and the F-33 Fingertight on page 8 are available.) Our M-645 Fitting is a direct replacement for the 6-40 threaded VICI (Valco) fitting. For more information on this product and other 6-40 threaded fittings, please see pages 44 45. Upchurch Scientific One-Piece Fingertight Fittings are rated between,000 6,000 psi (69 44 bar), depending on the fitting. Please see the specific pressure ratings for these fittings shown below. RheFlex One-Piece Fittings are designed for use with many of the Rheodyne manual valves, starting on page 87. The One-Piece RheFlex M4 Fittings, designed for use with Rheodyne MX Nano-Scale Modules, are listed on page 44. For One-Piece Fingertight Fittings for Ultra High Performance valves, see page 9. ChromTRAC Brightly colored knobs to easily track inlets and outlets of valves, columns, and detectors All ChromTRAC-compatible RheFlex fittings offer the ChromTRAC knob option. Specify the ChromTRAC two letter suffix for the color choice when ordering. Please see the ChromTRAC Suffix Codes table below. For example, to order red ChromTRAC knobs with the RheFlex One-Piece Fitting on this page, specify 6000-8RD. No suffix indicates black knobs. View the online product bulletin for RheFlex fittings at: http://www.idex-hs.com/support/rheodyne/product_bulletins.aspx ChromTRAC Suffix Codes: CODE COLOR BL GN GY RD WH YL MC Blue Green Gray Red White Yellow Multi-color (two each of blue, green, gray, red and yellow) Add these two letter suffixes to the end of the seven-digit part numbers of the 0-3 and M4 threaded RheFlex Fittings on pages 4, 6, 9 and 44. One-Piece Fingertight Pressure ratings F-00, F-00N 4,000 psi (76 bar) F-0, F-0BLK, F-7, F-30 6,000 psi (44 bar) M-645,750 3,50 psi (-4 bar) P-00,000 psi (69 bar) 6000-8 5,000 psi (345 bar) These data are generated under optimal conditions, using water at room temperature (except as noted). The data presented refers to the capability of the fittings, not the tubing. Your results may vary, depending on variables such as: the solvent used; the materials of the tubing, port, nut and ferrule used; and the temperature at which your analyses are run. F-00 0-3 Kel-F Fitting F-7 0-3 PEEK Fitting.8.65.96 F-0 0-3 PEEK Fitting M-645 6-40 PEEK/Kel-F Fitting for /3 OD tubing 6000-8 0-3 PEEK RheFlex Fitting with ChromTRAC Knob.09 F-30 0-3 PEEK Fitting P-00 /4-8 Kel-F Fitting.8.03.90 TOP SELLER see starred products in price block. One-Piece UPchurch Fingertight Fittings, F-00x Kel-F, Red, 0-3, for /6 OD tubing 0-pk $ 77.37 F-00Nx Kel-F, Natural, 0-3, for /6 OD tubing 0-pk 77.37 F-0x PEEK, Natural, 0-3, for /6 OD tubing 0-pk 54.6 F-0BLK PEEK, Black, 0-3, for /6 OD tubing ea. 5.57 F-0FUNPACK PEEK, Assorted Colors 3, 0-3, for /6 OD tubing 6-pk 7. F-7x PEEK, Natural, 0-3, Short, for /6 OD tubing 0-pk 54.6 F-30x PEEK, Natural, 0-3, Long, for /6 OD tubing 0-pk 54.6 M-645x PEEK/Kel-F, Natural, 6-40, for /3 OD tubing 0-pk 90.5 P-00 Kel-F, Natural, /4-8, for /8" OD tubing ea. 9.4 One-Piece rheflex Fingertight Fitting 4 6000-8 PEEK, Natural, 0-3, for /6 OD tubing 0-pk $ 39.70 For your convenience we ship most Upchurch Scientific Fingertight Fittings in 0-packs. However, if you prefer, you may order individual pieces (an x in the product part number simply designates 0-pk ). Some of the Upchurch Scientific fittings on this page are available in additional colors. Please contact your distributor or us for more information. 3 Includes six F-0 Fittings in the following colors: natural, blue, black, green, red and yellow. 4 ChromTRAC compatible. Specify the two-letter suffix (see ChromTRAC Suffix Codes Table, on this page) after the fittings seven-digit part number for the ChromTRAC knob color of your choice. No suffix indicates black knobs.
Column Hardware & Accessories Sure-Fit Connector self-adjusting to any port depth regardless of column manufacturer Fingertight to 6,000 psi (44 bar) Available in PEEK or stainless steel Eliminating leaks and dead volume is critical to achieving good chromatographic results. Only the Sure-Fit connector gives you a perfect fit in nearly every 0-3 coned receiving port every connection, every time. Typically leaks and dead volume are caused by an improperly plumbed system and can occur for many reasons, including switching columns. The problem occurs not only when switching from one manufacturer to another, it can also occur when changing columns from the same manufacturer. This is because female port depths vary, even within the same manufacturing lot. Unless the connector is universal, eliminating leaks and dead volume cannot be guaranteed. The Sure-Fit connector has a unique internal spring-tensioned mechanism that automatically self-adjusts to virtually any port depth while maintaining constant pressure on the /6 OD tubing. Sure-Fit connectors come with either PEEK tubing or stainless steel tubing, in varying lengths and internal diameters, pre-assembled for ease of use. Choose the 950-0007-HP a U-shaped Sure-Fit connector for use in Agilent 00 systems, or select the 9504-0005-050 for micro-scale applications where biocompatibility is desired..50.43 9500-0005-00 Single End, Stainless Steel SURE-FIT CONNECTORS, STAINLESS STEEL 9500-000-00 Single End,.00 x 0 cm ea. $ 80.00 950-0007-HP Single End, U-Shape,.007 * ea. 0.00 9500-0007-00 Single End,.007 x 0 cm ea. 80.00 9500-0005-00 Single End,.005 x 0 cm ea. 80.00 9500-000-030 Single End,.00 x 30 cm ea. 80.00 SURE-FIT CONNECTORS, PEEK 9504-0007-050 Single End,.007 x 50 cm ea. $ 05.00 9504-000-050 Single End,.00 x 50 cm ea. 05.00 9504-0005-050 Single End,.005 x 50 cm ea. 05.00 3-0005-050-5 Replacement Capillary Tube,.005 x 50 cm, PEEK 5-pk 30.00 3-000-050-5 Replacement Capillary Tube,.00 x 50 cm, PEEK 5-pk 30.00 3-0007-050-5 Replacement Capillary Tube,.007 x 50 cm, PEEK 5-pk 30.00 9500-FP Replacement, PEEK ea. 3.60 9500-F-0 Replacement, PPS 0-pk 36.00 * Compatible for use with the Agilent 00 system 5
Fingertight Fittings Two-Piece Fingertight Fittings Introduction Two-Piece Fingertight Fittings feature a separate ferrule. With a twopiece design, you can replace just the ferrule instead of the entire unit, making these Fingertights more economical than the onepiece version. Two-Piece RheFlex Fingertight Fittings The Rheodyne RheFlex Precision Two-Piece PEEK Fittings sets provide inert, biocompatible connections for instrumentation. These dependable /6 PEEK fittings have a reliable, time-tested design. Each /6 fittings set contains a 0-3 threaded nut and a speciallydesigned PEEK ferrule. Three lengths of the /6 nut are available: Standard, Short, and Extra Long. RheFlex Fingertight Fittings are rated for use up to 7,000 psi. View the online product bulletin at: http://www.idex-hs.com/support/rheodyne/product_bulletins.aspx Application Installing High Pressure Fittings Before connecting fittings, ensure the end of the tubing has a clean, square, burr-free cut. This is very important, as the square cut helps the tubing make full contact with the bottom of the mating port. Neglecting to properly cut the tubing could lead to dead volume, resulting in peak distortion such as fronting, tailing or broadening. Polymer One-Piece Fittings. slide the fitting at least 3/6 from the end of the clean cut tubing.. insert the assembly into the receiving port, pushing the tubing into the port until it bottoms out. 3. Finger tighten the nut into the port until snug. 4. After several uses (especially at high pressures) the fitting should be replaced. Two-Piece Fittings with Polymer s. slide the nut, followed by the ferrule, at least 3/6 from the end of the clean cut tubing (see figure below).. Follow steps 3, above. 3. After several uses (especially at high pressures) the ferrule should be replaced..95.55 Stainless Steel Nuts and s. Follow steps in the Two-Piece Fittings with Polymer s section above. 6000-54 0-3 PEEK Nut with 6000-5 PEEK (RD ChromTRAC suffix) 6000-55 0-3 PEEK Nut with 6000-5 PEEK. Using an appropriate wrench, tighten an additional /4 / turn past fingertight. Remove the fitting to confirm the ferrule is swaged onto the tube. 3. Because the ferrule is permanently attached to the tubing we highly recommend that the fitting only be used in the mating port into which it was initially swaged. Failure to do this may result in dead volume and/or leaks. Tubing Nut Receiving Port.30.3.75 Upchurch Scientific recommends a tightening torque of -4 in-lbs for its Fingertight fittings roughly equivalent to typical finger tightening torque. Please note that undertightening can result in fitting leakage at pressures less than to what the fitting is rated, and overtightening can cause leakage and/or fitting damage. 6000-066 0-3 PEEK Nut with 6000-5 PEEK (YL ChromTRAC suffix) 6000-078 5/6-4 PEEK Nut with 6000-079 PEEK 6 Two-Piece Rheflex Fingertight Fittings 6000-5 PEEK s, for /6 OD tubing 0-pk $ 35.0 6000-079 PEEK s, 5-pk 9.50 Nuts* (All Two-Piece RheFlex Nuts include the appropriate ferrule(s)) 6000-54 Stnd. Length, Natural PEEK, 0-3, for /6 OD tubing 0-pk $ 44.50 6000-55** Short, Natural PEEK, 0-3, for /6 OD tubing 0-pk 47.50 6000-066 Extra Long, Natural PEEK, 0-3, for /6 OD tubing ea..70 6000-078 Stnd. Length, Natural PEEK, 5/6-4, ea. 9.90 6000-83 ChromTRAC Fittings Identification Kit 0-pk 5.40 * ChromTRAC compatible, except 6000-078. Specify the two-letter suffix (see ChromTRAC Suffix Codes Table, page ) after the fittings s seven-digit part number for the ChromTRAC knob color of your choice. No suffix indicates black knobs, with the exception of 6000-55. ** 6000-55 does not come with knobs. ChromTrac knobs can be used; however, please note the knobs do not snap in place as with other fittings.
Fingertight Fittings F-54 0-3 Female PEEK Nut, with F-9 F-93 0-3 Short PEEK Hex Head Nut, with F-9.40.60 F-95 0-3 Short PEEK Nut, with F-9.64 F-97 M6 Long PEEK Nut with F-9.85 F-90 0-3 Standard Stainless Steel Nut, with F-9 F-94 0-3 Short Stainless Steel Hex Head Nut, with F-9 F-96 0-3 Long PEEK Nut, with F-9.48.60.68.85 F-98 0-3 Short PEEK Headless Nut, with F-9 Two-Piece SealTight Fingertight Fittings hold up to 9,000 psi (60 bar) with Fingertight Convenience! The dual compression created by the specially designed nut and ferrule enables the Upchurch Scientific SealTight Fittings system to outperform standard finger tightened fittings. The forward cone of the SealTight provides gripping power and a leak-free seal via conventional compression by the receiving port. The slotted end creates the second compression zone in conjunction with a SealTight Nut. (See diagram on page 6. The SealTight design is similar to that of the RheFlex Two-Piece ). All SealTight Nuts are for use with /6 OD tubing and are designed to be used with the F-9. This fittings system is also interchangeable with Two-Piece RheFlex Fittings System. Try our F-350 FlushNut for the ultimate streamline design. For more information on these innovative products, please see page. SealTight Pressure Ratings (psi bar) : Product F-54, F-90, F-95, F-96, F-97 F-93, F-94, F-8, F-98, F-84, F-85 Tightening Method On PEEK Tubing 3 On Stainless Steel Tubing 3 Finger tightened 7,000 (483) 9,000 (60) / turn past finger tightened 7,000 (483) 9,000 (60) Finger tightened 3,000 (07) Wrench tightened 4 7,000 (483) 3,000 (07) F-87, F-88 Finger tightened 7,000 (483) 9,000 (60) F-350 Wrench tightened 5 7,000 (483) 9,000 (60) This chart is intended for reference purposes only. Your results may vary depending on nut, receiving port and tubing materials, actual tubing diameter (due to manufacturer s tolerances), chemical compatibility, etc. Tightened into a stainless steel port. 3 Using /6 OD x.00 ID tubing. 4 One-half turn past finger tightened, with our P-97 Headless Nut Extender Tool (page ). 5 Tightened with our F-345 FlushNut Tool (page )..0.0 For the Ultra Performance version of a SealTight fitting please see page. F-8 0-3 Long PEEK Hex Head Nut, with F-9.96 F-87 0-3 Long PEEK Knurl/Hex Head Nut, with F-9 F-85 0-3 Long PPS Headless Nut, with F-9.5. F-350 0-3 Stainless Steel FlushNut (order F-9 separately) Please : Overtightening these fittings on fluoropolymer (e.g., FEP, PFA and ETFE) tubing can cause the ID of your tubing to collapse. Please : Use our NanoTight Kits (page 40) to easily connect capillary tubing to any 0-3 threaded, coned port designed for /6 OD tubing. See our nut tightening tools on pages 9, and. Two-Piece SealTight Fittings for /6 OD Tubing F-9x SealTight s, Black PEEK 0-pk $ 37.94 Nuts (All SealTight Nut 0-pks include a 0-pk of F-9x s except F-350x) F-54x Female Nuts, Stnd. Head, Natural PEEK, 0-3 0-pk $ 9.77 F-90x Stnd. Length Nuts, Stnd. Head, SST, 0-3 0-pk 99.86 F-93x Short Nuts, Hex Head, Black PEEK, 0-3 0-pk 54.6 F-94x Short Nuts, Hex Head, SST, 0-3 0-pk 99.86 F-95x Short Nuts, Stnd. Head, Black PEEK, 0-3 0-pk 54.6 F-96x Long Nuts, Stnd. Head, Black PEEK, 0-3 0-pk 54.6 F-97x Long Nuts, Stnd. Head, Black PEEK, M6 0-pk 54.6 F-98x Short Nuts, Headless, Black PEEK, 0-3 0-pk 54.6 F-8x Long Nuts, Hex Head, Black PEEK, 0-3 0-pk 50.58 F-8x Long Nuts, Hex Head, Brown PPS, 0-3 0-pk 46.0 F-84x Long Nuts, Headless, Black PEEK, 0-3 0-pk 50.58 F-85x Long Nuts, Headless, Brown PPS, 0-3 0-pk 46.0 F-87x Long Nuts, Knurl/Hex Fat Head, Black PEEK,0-3 0-pk 50.58 F-88x Long Nuts, Knurl/Hex Fat Head, Brown PPS, 0-3 0-pk 46.0 F-350x FlushNuts*, SST, 0-3 (order F-9 s separately) 0-pk 00.8 * More information about our FlushNut family of fittings, including an appropriate tightening tool for use with the F-350 fitting, can be found on page. SST = Stainless Steel 7
Fingertight Fittings Two-Piece Fingertight Fittings Upchurch Scientific s original Two-Piece Fingertight Fittings were designed exclusively for /6 OD tubing. We offer optional ferrules for connecting /3, 360 µm and 90 µm OD tubing into coned ports designed for /6 OD tubing. These special ferrules work with any Fingertight nut on this page. Our M-5 Conductive Perfluoroelastomer is designed for mass spectrometer electrospray applications. For more information on this product, please turn to page 4. To order, please follow these guidelines: /6 OD tubing Select the desired nut, which comes complete with the appropriate ferrule. Or, order the optional F-4N, along with the desired nut by replacing the x at the end of its product number with -0. For instance, if you want an F-00 Nut, order F-00-0, not F-00x. Please : -0 denotes a single nut without the ferrule. /3 OD tubing Select the F-3. Order the desired nut by replacing the x at the end of its product number with -0, as described above. 360 µm OD tubing Select the F-5. For electrospray applications, choose the M-5 Conductive. Order the desired nut by replacing the x at the end of its product number with -0, as described above. 90 µm OD tubing Select the F-48. Order the desired nut by replacing the x at the end of its product number with -0, as described above. See the pressure rating for these and other high pressure fittings on page 4..9 F -3 Optional PEEK for /3 OD tubing.3 F-4N Optional Tefzel for /6 OD tubing.3 F-48 Optional Kel-F for 90 µm OD tubing.3 F -5 Optional Kel-F for 360 µm OD tubing F-00 0-3 Delrin Winged Nut with F-4 PEEK.5 F-330 0-3 PEEK Nut with F-4 PEEK.67.90.7 F-40 0-3 Stainless Steel Nut with F-4 PEEK.4 Just Wing It:.58 F-300 0-3 PEEK Double-Winged Nut with F-4 PEEK Some Upchurch Scientific Fingertight Nuts feature wings in addition to a knurled head, which provide more leverage when tightening the fitting into a receiving port. Choose our single or double-winged design..64 F-33 0-3 PEEK Nut with F-4 PEEK.68.89 F-50 0-3 Stainless Steel Nut with F-4 PEEK.3 M-5 Optional Conductive Perfluoroelastometer for 360 µm OD tubing TOP SELLER see starred products in price block. 8 Two-Piece Fingertight Pressure Ratings F-3 3,500 6,000 psi (4 44 bar) F-4 6,000 psi (44 bar) F-4N,750 psi ( bar) F-48 6,000 psi (44 bar) F-5 6,000 psi (44 bar) M-5 3,500 psi (03 bar) These data were generated under optimal conditions, using water at room temperature (except as noted). The data presented refer to the capability of the fittings, not the tubing. Your results may vary, depending on variables such as: the solvent used; the materials of the tubing, port, nut and ferrule used; and the temperature at which your analyses are run. Pressure rated to 3,500 psi (4 bar) in plastic ports and to 6,000 psi (44 bar) in metal ports. Wrench tightens to 0,000 psi (690 bar) when used with SST nut, such as F-40. 3 Conductive for electrospray applications. Two-Piece POLYMER Fingertight Fittings F-00x Delrin Nuts, Red, with F-4 s, 0-3 0-pk $ 46.0 F-300x PEEK Nuts, Natural, with F-4 s, 0-3 0-pk 50.58 F-330x Long PEEK Nuts, Natural, with F-4 s, 0-3 0-pk 50.58 F-33x Short PEEK Nuts, Natural, with F-4 s, 0-3 0-pk 50.58 Two-Piece SST* Fingertight Fittings F-40x Stainless Steel Nuts with F-4 s, 0-3 0-pk $ 05.00 F-50x Long Stainless Steel Nuts with F-4 s, 0-3 0-pk 05.00 Replacement s For /6 OD Tubing F-4x PEEK s, Natural 0-pk $ 38.50 F-4Nx Tefzel s, Natural 0-pk 38.50 For /3 OD Tubing F-3 PEEK, Natural ea. $ 8.03 For 360 µm OD Tubing F-5 Kel-F, Natural ea. $.9 M-5 Conductive Perfluoroelastomer, Black ea. 5.90 For 90 µm OD Tubing F-48 Kel-F, Natural ea. $.9 * SST = Stainless Steel
Stainless Steel Fittings Stainless Steel Fittings These 36 Stainless Steel Fittings are rated to 0,000 psi (690 bar) when wrench tightened. Choose Upchurch Scientific Standard Fittings, or select from the Rheodyne RheFlex or other manufacturercompatible offerings. Standard Stainless Steel Fittings.3 C-35 /4-8 Nut C-36.56.9 U-400 0-3 Nut U-40 Beckman Compatible Fittings.40.6.3 U-450 M6 Nut.43 U-40.6 Wrenches For your convenience, we offer wrenches in three standard sizes. You will need two A-304 wrenches to tighten most nuts into unions found on page (for unions 593 and U-35, you need one A-304 and one A-30 wrench). The Rheodyne Wrench is slotted to fit over /6 and /8 OD tubing, and has /4 and 5/6 ends. U-40 0-3 Nut U-40.6 U-443 0-3 Nut U-40.70.6 do not use metal fittings in plastic ports, as this can damage the port! Please see the Fittings Applications chart on page 56 for more information about fittings compatibility with tubing and port materials. see our Ultra High Performance Fittings on page 9. our 0-3 stainless steel plug, P-50, is on page 6. Rheodyne Fittings 6000-09 0-3 Nut and Set.3.38 6000-08 5/6-4 Nut and Set.8 SSI Compatible Fittings.3.75 VICI (Valco) Compatible Fittings.56 U-350 /4-8 Nut U-35 U-30 0-3 Nut U-3..8 6000-0-3 Nut and Set.53.8 Waters Compatible Fittings.3 U-40 0-3 Nut U-40.46.6 6000-6 0-3 Nut and Set TSP/LDC Compatible Fittings.55.6 U-458 5/6-4 Nut U-40.55 U-459 5/6-4 Nut C-36.67.9.8 Standard Stainless Steel Fittings C-35x Nuts, /8, /4-8 (use with C-36 ) 0-pk $ 83.05 C-36x s, /8 0-pk 49.58 U-400x Nuts, /6, 0-3 (use with U-40 ) 0-pk 37.06 U-40x s, /6 0-pk 5.9 U-450x Nuts, /6, M6 (use with U-40 ) 0-pk 98.65 Beckman Compatible Fittings U-40x s, /6 0-pk $ 5.9 U-40x Nuts, /6, 0-3 0-pk 36.93 U-443 Long Nut, /6, 0-3 ea..7 Rheodyne RheFlex Fittings 6000-09 Standard Nuts, with 6000-0 s, /6, 0-3 0-pk $ 63.90 6000- Long Nuts, with 6000-0 s, /6, 0-3 0-pk 68.0 6000-6 Extra-Long Nuts, with 6000-0 s, /6, 0-3 0-pk 9.40 6000-0 s, /6 0-pk 4.30 6000-08 Nuts with 6000-083 s, /8, 5/6-4 ea. 6.30 6000-083 s /8 5-pk 33.60 SSI Compatible Fittings U-350x Nuts, /6, /4-8 0-pk $ 60.73 U-35x s, /6 0-pk 7.84 TSP/LDC Compatible Fittings C-35x Nuts, /8, /4-8 (use with C-36 ) 0-pk $ 83.05 C-36x s, /8 (for pump inlet) 0-pk 49.58 U-40x s, /6 (for pump outlet) 0-pk 5.9 U-458 Nut, /6, 5/6-4 (for pump outlet) (use with U-40 ) ea. 0.03 U-459 Nut, /8, 5/6-4 (for pump inlet) (use with U-40 ) ea. 0.03 VICI (Valco) Compatible Fittings U-30x Nuts, /6, 0-3 0-pk $ 36.93 U-3x s, /6 0-pk 5.0 Waters Compatible Fittings U-40x s, /6 0-pk $ 5.9 U-40x Nuts, /6, 0-3 0-pk 36.93 Wrenches A-304 Fittings Wrench, /4 x 5/6 $ 6.34 A-305 Fittings Wrench, / x 9/6 8.53 A-30 Fittings Wrench, 3/8 x 7/6 6.75 680 Rheodyne Wrench, /4 x 5/6.0 Designed for use with Rheodyne s manual valves with metal stators. These valves start on page 87. For more information, please see page 9. 9
LiteTouch Fittings LiteTouch Fittings helps Prevent Twisting of Polymer Tubing high Pressure with Fingertight Convenience For /3, /6 and /8 OD Tubing The LiteTouch Fittings System from Upchurch Scientific grips tubing at two compression points (see diagram), holding to high pressures with Fingertight convenience. It also prevents polymer tubing from twisting, a potential problem when using standard Fingertight fittings. LiteTouch Fittings are available for use with /3, /6 and /8 OD tubing sizes, and for 0-3 and /4-8 coned ports. For those space-limited applications where nut heads interfere with each other, try our FlushNut Fittings. (FlushNut Fittings require a tightening tool. Please see page for more information about these products.) To avoid collapsing the ID of your tubing, Upchurch Scientific recommends the LiteTouch system be used on hard tubing only, such as stainless steel and PEEK polymer tubing. We do not recommend the LiteTouch System for repeated use in plastic ports..9 LT-3 PEEK with Stainless Steel Lock Ring for /3 OD tubing.. LT-00 PEEK with Stainless Steel Lock Ring for /6 OD tubing.3 LT-35 One-Piece LiteTouch SealTight with Stainless Steel Lock Ring for /6 OD tubing.5. F-354 0-3 Stainless Steel FlushNut for /3 and /6 OD tubing.0.30 F-364 /4-8 Stainless Steel FlushNut Removal Tool LT-0 0-3 PEEK Nut for /3 and /6 OD tubing.58.63.68 LT-0 /4-8 PEEK Double-Winged Nut Use our LT-300 Removal Tool to detach LiteTouch and Super Flangeless s from tubing. Simply slide the appropriate tool blade slot between the lock ring and the ferrule body. With a slight twist, the ring will pop off, releasing the ferrule from the tubing. Please : This Removal Tool will not work with the LT-35 System..3.56 C-35 /4-8 Stainless Steel Nut.6 LT-5 /4-8 PEEK Nut LT-00 PEEK with Stainless Steel Lock Ring For the Ultra High Performance version of a LiteTouch Fitting please see page. 0 LiteTouch FittinGs Systems: Receiving Port PEEK Nut Tubing Compression by Stainless Steel Ring Compression by Receiving Port Cone Optional 0-3 stainless steel nuts that can be used with the LiteTouch s are found on page 9. LiteTouch Pressure Ratings* LT-3 for /3 OD tubing 5,000 psi (345 bar) LT-00 for /6 OD tubing 5,000 psi (345 bar) LT-35 for /6 OD tubing 5,000 psi (,034 bar) LT-00 4,500 psi (30 bar) * This chart is intended for reference only. The data presented refer to the capability of the ferrules, not the tubing. Your results may vary depending on nut, receiving port and tubing materials, actual tubing diameter (due to manufacturer s tolerances), chemical compatibility, etc. LiteTouch Systems For /3 OD Tubing LT-3x PEEK s, Natural, with SST lock rings 0-pk $ 79.0 For /6 OD Tubing LT-00x PEEK s, Natural, with SST lock rings 0-pk $ 5.55 LT-35x PEEK s, Black, with SST lock rings 0-pk 48.33 For /8 OD Tubing LT-00x PEEK s, Natural, with SST lock rings 0-pk $ 53.68 LiteTouch Nuts For /3 and /6 OD Tubing F-354x Stainless Steel FlushNuts 3, 0-3 0-pk $ 00.8 LT-0x PEEK Nuts, Natural, 0-3 0-pk 7.75 For /8 OD Tubing C-35x Short Stainless Steel Nuts, /4-8 0-pk $ 83.05 F-364x Stainless Steel FlushNuts 3, /4-8 0-pk 00.8 LT-0x PEEK Nuts, Natural, /4-8 0-pk 7. LT-5x Short PEEK Nuts, Natural, /4-8 0-pk 7. Removal Tool LT-300 Removal Tool for LiteTouch and Super Flangeless s $ 3.93 LT-3, LT-00 and LT-35 can be used with all 0-3 nuts found on this page and page 9. LT-00 can also be used with all /4-8 nuts found on page 9. 3 A tightening tool is required for these fittings (see page ). SST = Stainless Steel
FlushNut and Flangeless SealTight Fittings FlushNut Fittings For Coned and Flat-Bottom Ports Tightens Flush with the Top of the Receiving Port several Options Upchurch Scientific FlushNut Fittings are designed for those tightspace applications where nut heads often interfere with each other. When coupled with an appropriate ferrule and tightened into a receiving port, the FlushNut s slotted head seats at or near flush with the top of the port. This feature allows FlushNut Fittings to reside in closer proximity than any other option on the market. FlushNut Fittings are available for use with a number of ferrule systems and for use with /3, /6 and /8 OD tubing (see table below). Pressure ratings for these products range from 700 9,000 psi (48 60 bar), determined by the tubing and ferrule system selected. Please see the pages indicated in the table below for specific pressure ratings. All FlushNut Fittings are manufactured from 36 stainless steel. Tighten or remove FlushNut Fittings with our specially designed FlushNut Wrenches, available in 0-3 and /4-8 versions. Except the P-3 Plug, which is made of PEEK polymer. FlushNut Wrenches FlushNut Fittings System: Flangeless SealTight Fittings For Flat-Bottom Ports hold up to 5,000 psi in /4-8 Flat-Bottom Ports All Polymer Construction Seats at or near flush, depending on port depth Several ferrule options (see chart, lower left) Special wrench for easy tightening The Upchurch Scientific Flangeless SealTight Fittings system has redefined the pressure range of metal-free applications for traditional /4-8 flat-bottom ports. Our innovative F-90 incorporates the dual compression mechanism of the F-9 coned SealTight in a design that allows its use in a flat-bottom port. With this ferrule and a Flangeless SealTight nut, it is now possible to hold pressures up to 5,000 psi (345 bar) with all-polymer components in flat-bottom ports. All Flangeless SealTight nuts require the PEEK F-90 Flangeless SealTight. This fittings system, for use with /6 OD tubing only, is particularly well suited for applications where metal is undesirable, such as those involving NMR or microwaves..87 FlushNut Options: Threads/ For Tubing FlushNut Port* OD Options Page F-350 0-3 C /6 SealTight F-9 7 F-354 0-3 C /3 LiteTouch LT-3 0 0-3 C /6 LiteTouch LT-00 0 0-3 C /6 LiteTouch SealTight LT-35 0 F-364 /4-8 C /8 LiteTouch LT-00 0 /4-8 FB /8 Super Flangeless P-350, P-35, 4 P-359, P-360 /4-8 FB.8/.0 mm Super Flangeless P-355 4 F-356 /4-8 FB /3 Super Flangeless P-48 3 /4-8 FB /6 Super Flangeless P-50, P-59, P-60 3 F-358 /4-8 FB /6 Flangeless P-00, P-00N, 58 P-00R, P-, P-40 F-368 /4-8 FB /8 Flangeless P-300, P-300N, P-340 59 /4-8 FB.8/.0 mm Flangeless P-34 60 /4-8 FB 3.0 mm Flangeless P-343 60 P-3 /4-8 FB N/A Plug No ferrule required 6 * C = Coned; FB = Flat-bottom. F-90 Flangeless SealTight.87 F-94 Standard Length PEEK Nut F-9 Standard Length Delrin Nut F-98 Short PEEK Nut.6 Flangeless SealTight Fittings for /6 OD Tubing F-90x Flangeless SealTight s, Black PEEK 0-pk $ 40.65 Nuts F-9x Stnd. Length Nuts, Stnd. Head, Blue Delrin, /4-8 0-pk $.7 F-94x Stnd. Length Nuts, Stnd. Head, Black PEEK, /4-8 0-pk 7. F-98x Short Nuts, Stnd. Head, Black PEEK, /4-8 0-pk 7. FlushNut Wrenches F-345 Wrench for 0-3 threaded FlushNut Fittings $ 7.9 F-346 Wrench for /4-8 threaded FlushNut Fittings 7.9
Super Flangeless Fittings Super Flangeless Fittings Introduction For Flat-Bottom Ports designed to Hold to Higher Pressures than Standard Flangeless Fittings eliminates Loosening of Nuts Caused by Tubing Twist Upchurch Scientific Super Flangeless Fittings are designed to provide significant improvements over standard Flangeless Fittings (see pressure ratings on pages 3 and 4). The lock ring offers uniform compression on the ferrule while operating as a bearing against the nut. Thus, the nut can spin freely against the ferrule, preventing the tubing from twisting during the tightening process. This feature helps eliminate subsequent loosening of the nut, making the Super Flangeless system ideal for applications subject to vibration. These products are also well suited for connections that need to be broken frequently, since the lock ring holds the ferrule in place on the tubing until intentionally removed. Use the LT-300 Removal Tool (page 0) to release Super Flangeless s from tubing for repositioning. Super Flangeless Fittings For /6 OD Tubing (0-3 Flat-Bottom Ports) Several PEEK nut styles are available to connect /6 OD tubing into 0-3 flat-bottom ports. Use these fittings with rigid and semi-rigid tubing, such as PEEK, stainless steel and fluoropolymer materials (e.g., FEP, PFA, and ETFE). Connect capillary tubing using our NanoTight FEP Tubing Sleeves (see page 40). Pressure ratings for these fittings are included on page 3. The M-650 is made of PEEK polymer and the lock ring from passivated 36 stainless steel..60 M-65 0-3 PEEK shown with M-650 (not included).96.60 M-653 0-3 PEEK shown with M-650 (not included).00 Our other fittings for 0-3 flat-bottom ports, VacuTight Fittings, are listed on page 6. These fittings are designed to provide airtight connections under vacuum and low pressure conditions. Flangeless Nut Extender Tools Use the P-98, P-99 or P-399 Extender Tool to tighten any standard, short or extra long style nut in hard-to-reach places. For our Headless nuts, try the P-97 Tool. These tools can tighten any Upchurch Scientific knurl-headed male nut F-346 on pages 4, 7, 8, and 0 4 (except F-87, F-88 P-98 and winged nuts). They can also be used with many of the low pressure nuts please see page 58 for more information. The F-346 P-399 P-97 Tool tightens FlushNut P-99 Fittings (page ). M-654 0-3 PEEK shown with M-650 (not included) Super Flangeless Fittings for /6 OD Tubing s M-650x PEEK s, Natural with SST lock rings, 0-3 FB 0-pk $ 9.8 Nuts M-65x PEEK Short Hex Head Nuts, Green, 0-3 FB 0-pk $ 36.56 M-653x PEEK Headless Short Nuts, Green, 0-3 FB 0-pk 36.56 M-654x PEEK Long Knurl/Hex Fat Head Nuts, Green, 0-3 FB 0-pk 36.56 M-655x PEEK Long Hex Head Nuts, Green, 0-3 FB 0-pk 36.56 Flangeless Nut Extender Tools F-346 FlushNut Tool for /4-8 Nuts $ 7.9 P-9 For Standard Head Nuts with /4 Hex Drive, aluminum* 4.69 P-97 For Headless Style Nuts, aluminum 0.4 P-98 For Standard Head Nuts, Delrin 6.73 P-99 For Standard Head Nuts, aluminum 3.50 P-399 For Standard Head Nuts, Short, aluminum 3.50 * For easy coupling with torque wrench. SST = Stainless Steel M-655 0-3 PEEK shown with M-650 (not included) For the Ultra High Performance version of a Super Flangeless Fitting please see page 9.