High Pressure Pump Units JetPower

High Pressure Pump Units JetPower

Professional High Pressure Cleaning with URACA JetPower up to 2.800 bar /40.000 psi JetPower absolutely economic Wear resistant and user-friendly design for heavy duty performance. Return of by-pass and cooling water to surge tank. Maintenance-free coupling A new pump unit generation up to 2.800 bar /40.000 psi: Perfect high pressure cleaning with pure dynamics. The high end pump units in the URACA JetPower series were designed for particularly efficient, userfriendly and economical high pressure cleaning. Two power ranges (125 and 180kW) open up wide fields of applications suitable for all cleaning tasks. The essential demands in the everyday practice of cleaning professionals were taken into account in the new design of the URACA pump units. The weight/performance ratio is outstanding. JetPower is more flexible than ever due to the great variety of all kind of cleaning tools. JetPower Hightech in the field of high pressure cleaning Maximum performance for minimum weight and compact design Maximum consumer flexibility: control of spray guns, spray lances and dump guns Water supply of pump unit isolated from the tap Booster pump Electronic speed regulation and motor control Full performance even under extreme conditions Parallel operation of two pump units possible Pneumatic valves for smooth switch over Functional design Modern water cooled diesel engine compliant with future EC exhaust standards Performance Chart JetPower 125 P[bar] P[psi] 2800 40000 2000 30000 125-2000 1600 23000 125-1600 1200 18000 1000 14500 125-1200 800 12000 125-1000 125-800 0 0 Q [l/min] 0 16 23 26 Q [USgpm] 0 4,1 6,2 6,8 Performance Chart JetPower 180 P[bar] P[psi] 2800 40000 125-2800 180-2800 2000 30000 180-2000 1600 23000 180-1600 1200 18000 1050 15000 180-1200 180-1050 800 12000 180-800 0 0 Q [l/min] 0 Q [USgpm] 0 28 7,4 41 10,7 40 10,5 54 14,3 50 13,2 63 16,6 69 18,2 81 21,4 104 27,5 104 27,5 2

Some examples from the wide range of URACA JetPower applications: Cleaning of facades Cleaning of concrete surfaces Rehabilitation of facades Cleaning of vehicles Parts cleaning, deburring Heat exchanger cleaning Applications Cleaning of pipe lines Cleaning of pipes and bundles (outside) Cleaning of pipes and bundles (inside) Cleaning of grids and floors Parts cleaning Cleaning and resurfacing of concrete Jet cutting of concrete Cleaning of fittings Cleaning of steel constructions Cleaning and rehabilitation of facades Road stripping Vessel cleaning Reactor cleaning Paint stripping, rust removal Removal of drilling cores Surface cleaning Road stripping Manual surface cleaning Demolition of concrete 3

JetPower 125 Light, Flexible, Dynamic The 125 kw-series is compact, light, flexible and powerful thus allowing both high performance and mobility. 125 kw diesel engine One consumer pump unit Low weight Compact design Easy handling due to trailer version Flexible control High stability Isolation of vibrations subject to design Long lifetime due to torsionproof design Connection on suction and discharge side, external access Tank for service water New diaphragm safety and unloading valve Easy operation via URACA JetPower control system Ultra-high performance pump KD 716 of low weight and compact design. External and easy access to suction and discharge-sided connections. Versions: without cover with cover mobile JetPower 125 is available with various options, e.g. with or without noise hood, in stationary design or as trailer version. 4

Flexibility Six standard ranges for pressure and flow rate dependent on kind of application In mobile or stationary design Central lifting device, optionally With or without noise hood Special cleaning accessories suitable for all tasks Use of various tools, such as spray guns, spray lances or dump guns Ergonomically designed. Easy access for maintenance work due to tilt top protection hood. JetPower 125 125-800 125-1000 125-1200 125-1600 125-2000 125-2800 Pump type KD 716 version C KD 716 version C KD 716 version C KD 716 version D KD 716 version D KD716 versiond Gear ration 3,9 3,9 3,9 3,9 3,9 3,9 Plunger [mm] 28 25 22 19 17 15 Pressure, max [bar / psi] 800 / 11.600 1.000 / 14.500 1.200 / 17.400 1.600 / 23.200 2.000 / 29.000 2.800 / 40.000 Flow rate, min max [1/min] 31 69 24,5 54 18,5 40,5 14 26 10,5 23,5 8,3 15,5 [gpm] 8,2 18,2 6,5 14,3 4,9 10,7 3,7 6,8 2,8 6,2 2,2 4,1 Power max [kw / HP] 99,5 / 133 96 / 129 87/117 74/99 82/110 75/101 Suction connection C-coupling C-coupling C-coupling GEKA1 GEKA1 GEKA1 or VK50 or VK50 or VK50 Discharge connection M24 x 1,5 DKO-S M24 x 1,5 DKO-S M24 x 1,5 DKO-S UNF9 / 16-18 LH UNF9 / 16-18 LH UNF9 / 16-18 LH Pump speed, min max [rpm] 257 565 257 565 257 565 257 480 257 565 257 480 Motor speed [rpm] 1.000 2.200 1.000 2.200 1.000 2.200 1.000 1.870 1.000 2.200 1.000 1.870 Drive Deutz Diesel4cyl. Deutz Diesel4cyl. Deutz Diesel4cyl. Deutz Diesel4cyl. Deutz Diesel4cyl. Deutz Diesel4cyl. Motor power [kw /HP] 125/168 125/168 125/168 125/168 125/168 125/168 High pressure valve MDSV MDSV MDSV MDSV MDSV MDSV Booster pump impeller max. impeller max. impeller max. impeller max. impeller max. impeller max. 2bar@120 lit 2bar@120 lit 2bar@120 lit 2bar@120 lit 2bar@120 lit 2bar@120 lit Water tank [l] 84 84 84 84 84 84 Fuel tank [l] 200 200 200 200 200 200 Stationary without cover: Dimensions L x W x H [mm] 2.500 x 1.400 2.500 x 1.400 2.500 x 1.400 2.500 x 1.400 2.500 x 1.400 2.500 x 1.400 x1.630 x 1.630 x 1.630 x 1.630 x 1.630 x 1.630 Weight 1 [kg] 1.750 1.750 1.750 1.750 1.750 1.750 Stationary with cover: Dimensions L x W x H [mm] 2.500 x 1.400 2.500 x 1.400 2.500 x 1.400 2.500 x 1.400 2.500 x 1.400 2.500 x 1.400 x1.630 x 1.630 x 1.630 x 1.630 x 1.630 x 1.630 Weight 1 [kg] 1.900 1.900 1.900 1.900 1.900 1.900 Mobile: Dimensions L x W x H [mm] 2.500 x 1.400 2.500 x 1.400 2.500 x 1.400 2.500 x 1.400 2.500 x 1.400 2.500 x 1.400 x1.980 x 1.980 x 1.980 x 1.980 x 1.980 x 1.980 Weight 1 [kg] 2.100 2.100 2.100 2.100 2.100 2.100 1 Weight specifications without water and fuel. Subject to technical alterations and / or changes in contents. Conversion: 1 bar = 14,5038 psi, 1l=0,26417 US Gal., 1 kw = 1,3410 HP, 1 mm = 0,03937 inch. 5

JetPower 180 Pure Power for Cleaning Professionals The characteristic feature of the 180 kw-series is the high performance rate. 180 kw diesel engine Multi-consumer pump unit Low weight Compact design Long lifetime due to high torsion-proof design Compact noise hood Flexible control High stability Vertical pump design Easy access to pump without need to disassemble other components Access for maintenance, also possible from top Easy operation via URACA JetPower control system High pressure pump KD 724 in vertical design for ultra-high performance rates. JetPower 180 180-800 180-1050 180-1200 180-1600 180-2000 180-2800 Pump type KD 724 version B KD 724 version C KD 724 version C KD 724 version D KD 724 version D KD724 versiond Gear ration 3,73 3,73 3,73 3,73 3,73 3,73 Plunger [mm] 32 28 25 22 20 18 Pressure, max [bar / psi] 800 / 11.600 1.050 / 15.230 1.200 / 17.400 1.600 / 23.200 2.000 / 29.000 2.800 / 40.000 Flow rate, min max [1/min] 52 104 40,5 81 31,5 63 25 50 20 40 14 28 [gpm] 13,7 27,5 10,7 21,4 8,3 16,6 6,6 13,2 5,3 10,5 3,7 7,4 Power max [kw / HP] 150 / 201 152 / 204 135/181 141/189 137/184 120/161 Suction connection C-coupling C-coupling C-coupling GEKA1 GEKA1 GEKA1 or VK50 or VK50 or VK50 Discharge connection M36x2DKO-S M36x2DKO-S M36x2DKO-S UNF9 / 16-18 LH UNF9 / 16-18 LH UNF9 / 16-18 LH Pump speed, min max [rpm] 282 563 282 563 282 563 282 563 282 563 282 483 Motor speed [rpm] 1.050 2.100 1.050 2.100 1.050 2.100 1.050 2.100 1.050 2.100 1.050 1.800 Drive Deutz Diesel6cyl. Deutz Diesel6cyl. Deutz Diesel6cyl. Deutz Diesel6cyl. Deutz Diesel6cyl. Deutz Diesel6cyl. Motor power [kw /HP] 177/237 177/237 177/237 177/237 177/237 177/237 High pressure valve MSUV + GRV MSUV + GRV MSUV + GRV MSSV + PSV MSSV + PSV MSSV + PSV Booster pump centrifugal centrifugal centrifugal centrifugal centrifugal centrifugal 2bar@120 lpm 2bar@120 lpm 2bar@120 lpm 2bar@120 lpm 2bar@120 lpm 2bar@120 lpm Water tank [l] 150 150 150 150 150 150 Fuel tank [l] 300 300 300 300 300 300 Stationary without cover: Dimensions L x W x H [mm] 3.700 x 1.500 3.700 x 1.500 3.700 x 1.500 3.700 x 1.500 3.700 x 1.500 3.700 x 1.500 x 2.050 x 2.050 x 2.050 x 2.050 x 2.050 x 2.050 Weight 1 [kg] 3.400 3.400 3.400 3.400 3.400 3.400 Stationary with cover: Dimensions L x W x H [mm] 3.700 x 1.500 3.700 x 1.500 3.700 x 1.500 3.700 x 1.500 3.700 x 1.500 3.700 x 1.500 x2.100 x2.100 x2.100 x2.100 x2.100 x2.100 Weight 1 [kg] 3.600 3.600 3.600 3.600 3.600 3.600 6 1 Weight specifications without water and fuel. Subject to technical alterations and / or changes in contents. Conversion: 1 bar = 14,5038 psi, 1l=0,26417 US Gal., 1 kw = 1,3410 HP, 1 mm = 0,03937 inch.

JetPower 180 is available with various options, e.g. with or without noise hood, in stationary design or as trailer version. Versions: without cover with cover mobile Flexibility Six standard ranges for pressure and flow rate dependent on the kind of application A variety of options for individual consumer requirements and tools Stationary pump unit. Mobile design upon request. Special cleaning accessories suitable for all tasks Connection facilities for all current tool systems, manually or automatically operated (spray guns, spray lances, dump guns etc.) Ergonomic, comprehensible and flexible control. JetPower 180 Options Option 1 Option 2 Option 3 Different capacities for each large or small consumer Optimum access due to many tiltable and removable protection hood components. Different capacities for one large or two small consumers Different capacities for one large or two small consumers with / without hose relief 7

URACA s Extensive Range of Accessories The cleaning system supplier URACA offers a wide range of accessories suitable for all kinds of applications. Please ask for advice. Standard accessories High pressure hoses Spray guns Spray lances Dump guns Extension pipes Nozzles Fittings Remote controls Foot-operated valves Foot-operated switches and many others... URACA Pumpenfabrik GmbH & Co. KG Sirchinger Straße 15 D-72574 Bad Urach, Germany Phone +49 (71 25) 133-0 Fax +49 (71 25) 133-202 info@uraca.de www.uraca.de Certified acc. to: DIN EN ISO 9001: 2000 by LRQA VGB KTA 1401 Gost Rotating mortising nozzles A variety of nozzles for all kinds of applications. No additional energy is necessary. Water sand jet cleaning system Adaptable to URACA spray guns and spray lances without any problems. Improves the cleaning effect. Particularly suited to structured surfaces. Also available as abrasive jet cutting head. Pipe cleaning Rigid and flexible lances Foot-operated valves Safety devices Pipe cleaning nozzles for small and large pipe diameters Special nozzles up to 3 metres pipe diameter (DFK) Semi and fully automatic heat exchanger cleaning devices for inside and outside Tank and vessel cleaning accessories Small vessel cleaners High pressure tank cleaning heads up to 1.600 bar Rotating cleaning heads Manual positioning devices Semi-and fully automatic or manual tank cleaning systems, electrically, hydraulically or pneumatically driven JetPower.e 4.05 A11 L+S