Wireless Access Controlled Door Solution Solution family: Interior Door Solution Solution group: Single-Wood-Self Closing- Access Control Description The ASSA ABLOY Belgium solution for high security interior doors with integrated Aperio wireless Access Control system and a Panic-Lock. The aperio wireless technology is an integrated solution with online and offline door control that can be operated with the same access cards you use for your existing EAC system. The lock/door is automatically deadlocked as soon as the door is shut. Typical application markets Hardware Set Panic-Lock (automatic deadbolt), by ABLOY, Standard : EN 12209, SKG**, EN 179, EN 1125, BENOR ATG RF30/60 Cylinder (Euro Profile, double), MP83, by Litto, Standard : EN 1303 Door Closer, Cam-Motion, by ASSA ABLOY, Standard : EN 1154, DDA/CEN PR 15894, EN 15804 (EPD-ASA- 20130275-IBC1-EN) Hinges, Architectural Hardware, by Litto, Standard : EN 1935 Escutcheon (handles and integrated card reader), Aperio, by ASSA ABLOY, EN 15804 (EPD-ASA-20150279-IAB1-EN) Back Commercial, Healthcare, Offices, Public and Transport Front ASSA ABLOY Belgium http://www.assaabloy.be Set ID: C-S-1-Aperio-BE09 Tel: +32(0)22477911 Version:1
Powered by TCPDF (www.tcpdf.org) 1 Product Information Mechanical safety lock 309X501PZ-----4 The mechanical security lock 309X is used where the locking of a door has to be ensured by a 20 mm dead bolt throw for insurance reasons. Overview of Advantages Mechanical automatic locking system With double action lock, DIN left Mechanical self-locking process control between double action lock and control latch Burglary-resistant due to solid bolt with 20 mm throw Burglary resistance up to resistance class 2 can be achieved in suitable door systems Panic function approval in accordance with EN 179 approval in accordance with EN 1125 Suitable for fire doors Used with front door furniture Alternative function for unlocking with key from outside Scope of delivery 1 piece security lock 1 operating manual Technical data DIN direction Left-hand Panic function Yes Backset 55 mm Face plate width 20 mm Panic function Yes Distance 72 mm Approval DIN EN 179 EU certificate of conformity 0432 BPR-001 conformity 0432 BPR-001 DIN EN 1125 approval EU certificate of conformity 0432 BPR-0017 conformity 0432 BPR-0017 Building authorities test certificate P-12000460 Bolt throw 20 mm Follower 9 mm Version Euro profile cylinder Latch Double action latch Suitable for fire doors Yes Minimum load capacity of latch bolt 5 kn Minimum load capacity of bolt 10 kn Bolt counterpressure 6 kn Weight 1,05 kg EAN-Number Article number 4042203169289 309X501PZ-----4 Model Series 309X 1 Page of 1
E100 EURO Standard escutcheons Product description Communication from hub via RS485 bus to the Online Access Control System (addressable) - access decision in the EAC system Can be used with all European (DIN) mortise locks - in wooden, steel and tubular-frame doors Main electronics (RFID + radio) outside - security-relevant electronics inside Outside handle rotates freely - inside handle always engaged Possibility to store up to 10 emergency cards (only used in case of disconnection from the hub) LED for status visualisation Accessories/Individual parts Programming application tool Battery Escutcheon spare spindle set Optional Covering plate - to cover existing boreholes Suitable ASSA ABLOY products AH30 1-to-8 Standard Aperio RS485 communication hub AH20 1-to-1 (Advanced) Wiegand Aperio (Advanced) Wiegand interface communication hub AH40 1-to-16 IP AH40 Aperio IP communication hub Scope of delivery 1 escutcheon with battery (Lithium CR123A) and installation instructions Screws, drilling template and tool (for inserting cables) Technical data - Standard escutcheons Authentication Three levels of autentification (PIN only, CARD only, PIN & CARD combined) PIN code PIN code - 4 up to 8 digits Approvals CE Dimensions 312 x 41 x 10/20 mm (H x W x D) Application versions Basic = interior and exterior doors up to grade 2 Handle versions L-Shape, U-Shape Escutcheon finish Stainless steel brushed (ST) Distance/ Spindle Distance 72 mm, 92 mm; Spindle 8 mm, 9 mm, 10 mm Door Thickness Door leaf between 40 and 100 mm thick, in 10 mm increments Backset > 40 mm mm Battery 1 x Lithium CR123A Battery life > 40,000 cycles (for max. 3 years) Radio standard IEEE 802.15.4 (2.4 GHz) Encryption (radio communication) Distance between the RFID-Reader and hub Class of protection IP 52 AES 128 bits Operating temperature range 0 C to 60 C Typical range of 5 m or 25 m depending on the hub type and building environments Humidity < 85% (condensation-free) Status LED (red/green/orange) RFID Technology iclass /ISO 14443B; MIFARE Classic / MIFARE DESFire EV1; HID PROX/ EM410x; LEGIC (Advant, Prime, ISO 14443 UID, ISO 15693 UID) RFID reading UID / Sektor / Block / Application / File / LEGIC Segment Data Scanning range < 4 cm Online escutcheons E100 1 Page of 2
Powered by TCPDF (www.tcpdf.org) E100 EURO Standard escutcheons Interface Micro USB firmware download and battery back up Online escutcheons E100 2 Page of 2
1 Product Information Door closer with Cam-Motion technology and height-adjustable guide rail G195 or standard guide rail G193 Fulfils barrier-free building requirements (DDA / CEN TR 15894) Certified in compliance with EN 1154, size 1-4 Suitable for fire and smoke protection doors For single action doors up to 1100 mm wide Can be used in four installation types: hinge and non-hinge sides in standard and frame installation Capability characteristics Door closer with Cam-Motion technology and height-adjustable guide rail G195 or standard guide rail G193 Can be used with integrated concealed mounting plate, suitable for fire and smoke protection doors Can be used for left and right-handed doors Axis continuously height adjustable up to 14 mm Closing speed, latching speed and backcheck adjustable via front facing regulating valves Thermodynamic valves for consistent performance Variable adjustable closing force Opening angle up to 170 Effective backcheck and latching speed range adjustable Large range of applications Standard colours: silver EV1; white, similar to RAL9016; brown, similar to RAL8014; black, similar to RAL9005, stainless steel Customised finishes available on request Characteristics for guide rail G195 Height-adjustable by 2 mm for tolerance Concealed fastening screws Characteristics of standard guide rail G193 Without protective cover Visible fastening screws Technical data Variable adjustable closing force EN 1-4 Door width up to 1100 mm Fire and smoke protection Yes DIN door swing directions left / right handed Mounting method Standard and frame installation installation Closing speed Variable between 170-10 170-10 Latching speed Variable between 10-0 Backcheck Variable above 75 Opening angle hinge side ca. 170 Opening angle non-hinge side ca. 120 Weight 2.7 kg Height 64 mm Depth 57 mm Width 270 mm Certified in compliance with EN 1154 1 Page of 8
2 Product Information CE marking for building products Yes 2 Page of 8
3 Product Information view construction Space required on doors for standard installation on hinge side Left handed shown in diagram Right handed is the reverse Installation dimensions for direct standard mounting on hinge side Left handed shown in diagram Right handed is the reverse Installation dimensions with mounting plate for standard mounting on hinge side In compliance with EN 1154, Supplement 1, or for doors where direct mounting is not possible. Left handed shown in diagram Right handed is the reverse 3 Page of 8
4 Product Information Installation dimensions for direct frame mounting on hinge side Closer on hinge side of door frame. Left handed shown in diagram Right handed is the reverse Installation dimensions with mounting plate for frame mounting on hinge side Closer on hinge side of door frame. For doors where direct mounting is not possible. Left handed shown in diagram Right handed is the reverse Installation dimensions for direct standard mounting non hinge side Right handed door shown in diagram Left handed door is the reverse 4 Page of 8
5 Product Information Installation dimensions with mounting plate for standard mounting non hinge side For doors where direct mounting is not possible Right handed door shown in diagram Left handed door is the reverse Installation dimensions when mounted directly onto the frame non-hinge side Closer on non-hinge side of door frame Right handed door shown in diagram Left handed door is the reverse Installation dimensions with mounting plate for frame mounting non-hinge side Closer on non-hinge side of door frame. For doors where direct mounting is not possible. Right handed door shown in diagram Left handed door is the reverse 5 Page of 8
6 Product Information Mounting plate A120 For mounting with drilling template acc. to EN 1154 Supplement 1 and for universal use Mounting plate A130 For guide rail G193 and G195 Angle bracket A104 Only for standard guide rail G193 6 Page of 8
7 Product Information Glass door shoe A166 For mounting the door closer on the all-glass door leaf. Stainless steel full cover For DC500 and DC700 Stainless steel design cover For DC500 and DC700 7 Page of 8
Powered by TCPDF (www.tcpdf.org) 8 Product Information Hold-open device A152 (Cannot be used with fire and smoke protection doors) Mechanical hold-open device for doors which sometimes need to be secured in the open position. Simple fitting into guide rail G193 and G195. Hold-open angle max. 130 Adjustable hold-open force Not approved for use on fire and smoke protection doors. Opening damper A153 Helps to prevent the door and door handle from hitting a return wall. Simple fitting into guide rail. Opening damper continuously adjustable up to an opening angle of max. 130. Does not replace a door stop. 8 Page of 8
Powered by TCPDF (www.tcpdf.org) 1 Product Information Double euro- profile cylinder K4700- K4800- E Capability characteristics Litto MP83 Cylinder contains 5 vertical pins in nickel silver with springs in phosphor bronze in each cylinder core An additional combination of max.imum 5 springs and cams makes a lateral locking bar block or not Anti-drilling protection in cylinder body and cylinder core by 2 hardened steel pins per side Outher counter pins in hardened steel to protect the key way The specific shape of the cut of the key in the upper rib of the key offers a large number of possible combinations and a high security level against the forging of the key 3-zonal nickel silver keys with constant overlapping of the central base profile and lateral exceeding variable longitudinal ribs, provide a high level of security against the technical and unheard copying of keys Cylinders and keys numbered and reorders only available on presentation of the safety certificate Patented key and cylinder system until 2028 Optional emergency and hazard function offers the possibility to use the key from the outside, even if a key is present on the inside EN1303 normalized Technical data Type Base length Cylinder housing Standard finishing Other finishing Standard delivered KA or KD MKS Optional RFID key Extensions Double euro-profile cylinder L=30/30 mm brass MS58 matt nickel-plated polished brass with 3 keys yes yes yes adjustable in 5mm increments per side up to 240mm max. length length Litto 1 Page of 1
Powered by TCPDF (www.tcpdf.org) 1 Product Information ½ moon floor door stop TL0701SS Technical data Dimension Finish Fixing Ø 56x48x18mm, rubber 8mm AISI 304 quality stainless steel, finely brushed Visible, M8 plug en M8x60 screw Article number TL0701SS Architectural Hardware 1 Page of 1
Powered by TCPDF (www.tcpdf.org) 1 Product Information Hinges TL1102LSS The doors are suspended with hinges in stainless steel 18/10, brushed and polished, with flat ended. The hinge in open position has the dimensions of 106 mm (heigh) and 88 mm (open width) The spindle with a diameter of 10 mm is also in stainless steel. The blades with dimensions 100 mm ( heigh) on 36 mm ( width from knob) on 3 mm (depth), are rounded and each fitted with 4 milled screw holes. The upper and lower caps of 3 mm, are bar-turned and perfectly cylindrical. Capability characteristics Hinges For wooden door and frame EN 1935 Classe 10 Ring 6mm Rounded corners Technical data Dimensions Blade width Blade thickness Spindle Direction Screw holes Cap SKG tested Finish Open: 100 mm x 88 mm 36 mm from the knot 3 mm Ø 10mm Left / Right 4 milled screw holes 3 mm Yes Stainless steel, brushed and polished Article number TL1102LSS Belgium 1 Page of 1