SEQ # 727-88 Tractors: Skid Steers s T-63(5) State of Minnesota PRICING PAGE - METHOD # 2 (Typed Responses Required) August, 208 Price quote for: SKID/TRACK LOADERS & OEM ATTACHMENTS Vendor Name: John Deere Construction Retail Sales, a division of John Deere Shared Services, Inc. Contact Person: Richard Murga Street Address: 55 5th Avenue P.O. Box: City, State, Zip Moline, IL 6265 Phone #: 309-765-0260 Toll Free #: 800-39-3757 ext Fax #: N/A Email Address: MurgaRichard@JohnDeere.com Version of Excel used: 200.xlsx PERCENTAGE DISCOUNT PRICING.0 MANUFACTURER 2.0 DATE AND ID. OF PRICE LIST [0 Sep 8; WorksitePro s] 3.0 PERCENTAGE DISCOUNT FROM PRICE LIST John Deere See Note at Left 20% 4.0 PRICE FOR ADDITIONAL SERVICE MANUAL $45 4. PRICE FOR ADDITIONAL PARTS MANUAL $70 4.2 PRICE FOR ADDITIONAL OPERATIONS MANUAL $25 5.0 PERFORMANCE/ WARRANTY OPTIONS Use this section to offer performance/warranty options, number these items starting with 5., 5.2, etc. (Specify years, miles or hours extended term covers.) 5. N/A 5.2 N/A 6.0 NEW EQUIPMENT RENTAL PROGRAM If rental programs are available on the new equipment offered, with the option to purchase, list the hourly/weekly/monthly rental rate. Indicate the percent of rental fee paid by the purchaser that will be applied to the purchase price. See Solicitation Special Terms & Conditions. Hourly Rental Rate: N/A Weekly Rental Rate: N/A Monthly Rental Rate: N/A Percent (%) of Rental Fee applied to purchase price: N/A 7.0 VENDOR OWNED RENTAL RETURN OR DEMO EQUIPMENT PROGRAM See Solicitation Special Terms and Conditions. DEDUCT cost per Used Hour from the original Contract Price N/A 8.0 DISCOUNT OFF LIST PRICE FOR RELATED PARTS & ACCESSORIES 20% (See Special Terms and Conditions) Applies to Field and Referral Items in Price Pages when sold w/unit. 9.0 DELIVERY STARTING POINT - City, State, Zip Local Dealer (See Special Terms and Conditions - no flat rate allowed.) Price Per Loaded Mile: $5 with $50 Minimum 0.0 INSTALLATION - PER HOUR (Hourly Shop Rate): (Installation services may be requested on an "as needed" basis - see special terms and conditions.) $28.00.0 STANDARD WARRANTY: 2 mos full warranty Pricing WorksitePro
AF66 AG FORKS No Base Equipment Select One From Each Required Category 9360T AF66 AG FORKS For use on the following models: 32-38G SS 33-320 SS 38D-320D SS 38E-320E SS 37 CTL CT35 CTL,263.00 0 September 208
AF72 AG FORKS No Base Equipment Select One From Each Required Category 9330T AF72 AG FORKS For use on the following models: 37-328 SS 38D-328D SS 38E-328E SS CT35, CT322 CTLs 37G CTL 39D-323D CTLs 39E-323E CTLs,400.00 0 September 208
AF78 AG FORKS No Base Equipment Select One From Each Required Category 9340T AF78 AG FORKS For use on the following models: 37-328 SS 38D-328D SS 38E-328E SS CT322 CTL 37G CTL 39D-323D CTLs 39E-323E CTLs,550.00 0 September 208
AT4 Angle-Tatch The Angle-Tatch attaches to the Quik-Tatch coupler and allows attachments to tilt up to 4 degrees to the left and right of level. The Angle-Tatch allows buckets, blades, and other non-hydraulic attachments to rotate for more precise grading and leveling. Overall Width cm/(in) 8.87 (46.8) Overall Height cm/(in) 46.99 (8.5) Overall Depth cm/(in) 0.67 (4.2) Cylinder Bore cm/(in) 6.35 (2.5) Rod Diameter cm/(in) 3.30 (.3) Title Angle (degree) 4 Lift Capacity kg/(lb.) 905.08 (4,200) Weight kg/(lb.) 9.4 (422) Select One From Each Required Category F.O.B. Dubuque, Iowa 03D0T AT4 Angle-Tatch For use on the following models: 32G-332G SS 38E-332E SS 37G-333G CTL 39E-333E CTL 3,60.00 204K-324K Wheel Loader with Skid Steer Style Coupler. AT436025 Boom Mounted Hose Guide Kit [E-series] [G-series: 320G - 333G] 02.00 BYT0477 Boom Mounted Hose Guide Kit 32GR-38G 05.00 0 September 208
PA5B PLANETARY DRIVE AUGER Planetary Drive: Heavy Duty, All Gear Design Sealed Drive Unit Reverse Rotation Feature Forged Alloy Steel Heat-Treated Bolt-On Teeth Reinforced Boring Head Auger Bits: Double-Wrap Flighting Select One From Each Required Category FOB Dubuque,Ia. 03VT PA5B PLANETARY DRIVE AUGER For use on the following models: 32G-34G SS 7-27 CE 2,65.00 BACKHOE PLANETARY DRIVE AUGER QUICK CONNECTION 006 PA5B PLANETARY AUGER FOR SKID STEER Includes Skid Steer Mounting Bracket Bit is NOT included 007 PA5B PLANETARY AUGER FOR COMPACT EXCAVATOR LESS MOUNTING BRACKET NOTE: * Requires Interface Adapter (9800, 980) * Interface Adapter NOT included * For 7 and 27 CE * Bit is NOT included 405.00 No Added Cost INTERFACE ADAPTERS 9800 Interface Adapter for 7 ZTS and 7G 487.00 980 Interface Adapter for 26G - 35G CE and 0 TLB 487.00 AUGER BITS 9000 4 in. Heavy Duty Bit 245.00 900 6 in. Heavy Duty Bit 269.00 9002 8 in. Heavy Duty Bit 376.00 9003 9 in. Heavy Duty Bit 44.00 9004 0 in. Heavy Duty Bit 435.00 9005 2 in. Heavy Duty Bit 446.00 0 September 208
PA5B PLANETARY DRIVE AUGER Continued AUGER BITS Continued... 9006 5 in. Heavy Duty Bit 582.00 9007 8 in. Heavy Duty Bit 728.00 2 9008 24 in. Heavy Duty Bit 880.00 90 8 in. Tree and Shrub Bit 67.00 902 24 in. Tree and Shrub Bit 690.00 905 9 in. Rock Bit,334.00 906 2 in. Rock Bit,562.00 907 9 in. HD Difficult Ground Bit 549.00 908 2 in. HD Difficult Ground Bit 635.00 909 5 in. HD Difficult Ground Bit 789.00 9020 8 in. HD Difficult Ground Bit 935.00 902 24 in. HD Difficult Ground Bit,343.00 Adapters & Mounting Frames AT43624 PA5/PA30 Skid Steer Mounting Kit 563.00 Auger Bits KV5765 0 in. Heavy Duty Bit 435.00 AT379607 2 in. HD Difficult Ground Bit 635.00 KV5766 2 in. Heavy Duty Bit 446.00 KV5777 2 in. Rock Bit,562.00 AT379608 5 in. HD Difficult Ground Bit 789.00 KV5767 5 in. Heavy Duty Bit 582.00 AT379609 8 in. HD Difficult Ground Bit 935.00 KV5768 8 in. Heavy Duty Bit 728.00 KV5772 8 in. Tree and Shrub Bit 67.00 AT37960 24 in. HD Difficult Ground Bit,343.00 KV5769 24 in. Heavy Duty Bit 880.00 KV5773 24 in. Tree and Shrub Bit 690.00 KV576 4 in. Heavy Duty Bit 245.00 0 September 208
PA5B PLANETARY DRIVE AUGER Continued Continued... KV5762 6 in. Heavy Duty Bit 269.00 3 KV5763 8 in. Heavy Duty Bit 376.00 AT379606 9 in. HD Difficult Ground Bit 549.00 KV5764 9 in. Heavy Duty Bit 44.00 KV5776 9 in. Rock Bit,334.00 Extensions & Adapters KV5779 2 in. Hex Drive Extension 80.00 KV578 2 in. Hex to 2-9/6 in. Round Adaptor 235.00 KV5782 2-9/6 in. Round to 2 in. Hex 43.00 KV5780 24 in. Hex Drive Extension 20.00 Interface Adapters for Compact Excavators AT306925 Interface Adapter for 7 ZTS 487.00 AT306924 Interface Adapter for 27-35 CE and 0 TLB 487.00 AT306926 Interface Adapter for 50-60 CE 579.00 AT357576 ISO Adapter to Quik Tatch Coupler,584.00 AT32209 Hydraulic Hose For use on 35 and 50 CE Long Arm option. See Parts 0 September 208
PA30B PLANETARY DRIVE AUGER Planetary Drive: Heavy Duty, All Gear Design Sealed Drive Unit Reverse Rotation Feature Forged Alloy Steel Heat-Treated Bolt-On Teeth Reinforced Boring Head Auger Bits: Double-Wrap Flighting Select One From Each Required Category FOB Dubuque,Ia. 03NT PA30B PLANETARY DRIVE AUGER For use on the following models: 36G-332G SS 38E-332E SS 37G-333G CTL 39E-333E CTLs 204K,244J, 304K, 324J CWL 0 TLB 35-60 CE 2,293.00 * With the 244J, the Worksite Pro Skid Steer Style Coupler, AT357576, is required. AT428072 hydraulic quick coupler adapter kit is available to adapt all HIGH FLOW E series SSL and CTL machines to standard flow attachment couplers. BACKHOE PLANETARY DRIVE AUGER QUICK CONNECTION 008 PA30B PLANETARY AUGER FOR SKID STEERS, CTLs, AND CWL Includes Skid Steer Mounting Bracket Bit is NOT included 009 PA30B PLANETARY AUGER FOR COMPACT EXCAVATOR LESS MOUNTING BRACKET Requires Interface Adapter (980, 9803) Interface Adapter NOT included Bit is NOT included If Compact Excavator is equipped with Long Arm (720), also requires 2 hydraulic hoses (AT32209) from Parts. 405.00 No Added Cost INTERFACE ADAPTERS 980 Interface Adapter for 26G - 35G CE and 0 TLB 487.00 9803 Interface Adapter for 50G - 60G CE 579.00 AUGER BITS 9000 4 in. Heavy Duty Bit 245.00 0 September 208
PA30B PLANETARY DRIVE AUGER Continued AUGER BITS Continued... 900 6 in. Heavy Duty Bit 269.00 9002 8 in. Heavy Duty Bit 376.00 2 9003 9 in. Heavy Duty Bit 44.00 9004 0 in. Heavy Duty Bit 435.00 9005 2 in. Heavy Duty Bit 446.00 9006 5 in. Heavy Duty Bit 582.00 9007 8 in. Heavy Duty Bit 728.00 9008 24 in. Heavy Duty Bit 880.00 9009 30 in. Heavy Duty Bit,50.00 900 36 in. Heavy Duty Bit,369.00 90 8 in. Tree and Shrub Bit 67.00 902 24 in. Tree and Shrub Bit 690.00 903 30 in. Tree and Shrub Bit 975.00 904 36 in. Tree and Shrub Bit,67.00 905 9 in. Rock Bit,334.00 906 2 in. Rock Bit,562.00 907 9 in. HD Difficult Ground Bit 549.00 908 2 in. HD Difficult Ground Bit 635.00 909 5 in. HD Difficult Ground Bit 789.00 9020 8 in. HD Difficult Ground Bit 935.00 902 24 in. HD Difficult Ground Bit,343.00 Adapters & Mounting Frames AT43624 PA5/PA30 Skid Steer Mounting Kit 563.00 Auger Bits KV5765 0 in. Heavy Duty Bit 435.00 AT379607 2 in. HD Difficult Ground Bit 635.00 KV5766 2 in. Heavy Duty Bit 446.00 KV5777 2 in. Rock Bit,562.00 0 September 208
PA30B PLANETARY DRIVE AUGER Continued Continued... AT379608 5 in. HD Difficult Ground Bit 789.00 3 KV5767 5 in. Heavy Duty Bit 582.00 AT379609 8 in. HD Difficult Ground Bit 935.00 KV5768 8 in. Heavy Duty Bit 728.00 KV5772 8 in. Tree and Shrub Bit 67.00 AT37960 24 in. HD Difficult Ground Bit,343.00 KV5769 24 in. Heavy Duty Bit 880.00 KV5773 24 in. Tree and Shrub Bit 690.00 KV5770 30 in. Heavy Duty Bit,50.00 KV5774 30 in. Tree and Shrub Bit 975.00 KV577 36 in. Heavy Duty Bit,369.00 KV5775 36 in. Tree and Shrub Bit,67.00 KV576 4 in. Heavy Duty Bit 245.00 KV5762 6 in. Heavy Duty Bit 269.00 KV5763 8 in. Heavy Duty Bit 376.00 AT379606 9 in. HD Difficult Ground Bit 549.00 KV5764 9 in. Heavy Duty Bit 44.00 KV5776 9 in. Rock Bit,334.00 Extensions & Adapters KV5779 2 in. Hex Drive Extension 80.00 KV578 2 in. Hex to 2-9/6 in. Round Adaptor 235.00 KV5782 2-9/6 in. Round to 2 in. Hex 43.00 KV5780 24 in. Hex Drive Extension 20.00 Interface Adapters for Compact Excavators AT306925 Interface Adapter for 7 ZTS 487.00 AT306924 Interface Adapter for 27-35 CE and 0 TLB 487.00 AT306926 Interface Adapter for 50-60 CE 579.00 AT357576 ISO Adapter to Quik Tatch Coupler,584.00 0 September 208
4 PA30B PLANETARY DRIVE AUGER Continued AT32209 Continued... Hydraulic Hose For use on 35 and 50 CE Long Arm option. See Parts 0 September 208
PA40 PLANETARY DRIVE AUGER PA40 Planetary Drive Auger Standard Equipment PA40 Base Machine Performance: Flow Requirements: 28-42 GPM (06-59 lpm) Operating Pressure: 3625 psi Overall : Maximum auger diameter: 48 in (29mm) Output shaft: 2 in (5mm) Hexagon 3/4 in. Couplers and Hoses Select One From Each Required Category FOB Dubuque,Ia. 9965T PA40 PLANETARY DRIVE AUGER For use on the following models: 330G, 332G, 33G & 333G with High Flow. 5,750.00 Includes Skid Steer Mounting Bracket. AUGER BITS 9000 4 in. Heavy Duty Bit 245.00 900 6 in. Heavy Duty Bit 269.00 9002 8 in. Heavy Duty Bit 376.00 9003 9 in. Heavy Duty Bit 44.00 9004 0 in. Heavy Duty Bit 435.00 9005 2 in. Heavy Duty Bit 446.00 9006 5 in. Heavy Duty Bit 582.00 9007 8 in. Heavy Duty Bit 728.00 9008 24 in. Heavy Duty Bit 880.00 9009 30 in. Heavy Duty Bit,50.00 900 36 in. Heavy Duty Bit,369.00 90 8 in. Tree and Shrub Bit 67.00 902 24 in. Tree and Shrub Bit 690.00 903 30 in. Tree and Shrub Bit 975.00 904 36 in. Tree and Shrub Bit,67.00 905 9 in. Rock Bit,334.00 0 September 208
2 PA40 PLANETARY DRIVE AUGER Continued AUGER BITS Continued... 906 2 in. Rock Bit,562.00 907 9 in. HD Difficult Ground Bit 549.00 908 2 in. HD Difficult Ground Bit 635.00 909 5 in. HD Difficult Ground Bit 789.00 9020 8 in. HD Difficult Ground Bit 935.00 902 24 in. HD Difficult Ground Bit,343.00 Auger Bits KV5765 0 in. Heavy Duty Bit 435.00 AT379607 2 in. HD Difficult Ground Bit 635.00 KV5766 2 in. Heavy Duty Bit 446.00 KV5777 2 in. Rock Bit,562.00 AT379608 5 in. HD Difficult Ground Bit 789.00 KV5767 5 in. Heavy Duty Bit 582.00 AT379609 8 in. HD Difficult Ground Bit 935.00 KV5768 8 in. Heavy Duty Bit 728.00 KV5772 8 in. Tree and Shrub Bit 67.00 AT37960 24 in. HD Difficult Ground Bit,343.00 KV5769 24 in. Heavy Duty Bit 880.00 KV5773 24 in. Tree and Shrub Bit 690.00 KV5770 30 in. Heavy Duty Bit,50.00 KV5774 30 in. Tree and Shrub Bit 975.00 KV577 36 in. Heavy Duty Bit,369.00 KV5775 36 in. Tree and Shrub Bit,67.00 KV576 4 in. Heavy Duty Bit 245.00 KV5762 6 in. Heavy Duty Bit 269.00 KV5763 8 in. Heavy Duty Bit 376.00 AT379606 9 in. HD Difficult Ground Bit 549.00 0 September 208
PA40 PLANETARY DRIVE AUGER Continued Continued... KV5764 9 in. Heavy Duty Bit 44.00 3 KV5776 9 in. Rock Bit,334.00 Extensions & Adapters KV5779 2 in. Hex Drive Extension 80.00 KV578 2 in. Hex to 2-9/6 in. Round Adaptor 235.00 KV5782 2-9/6 in. Round to 2 in. Hex 43.00 KV5780 24 in. Hex Drive Extension 20.00 Interface Adapters for Compact Excavators AT306925 Interface Adapter for 7 ZTS 487.00 AT306924 Interface Adapter for 27-35 CE and 0 TLB 487.00 AT306926 Interface Adapter for 50-60 CE 579.00 AT357576 ISO Adapter to Quik Tatch Coupler,584.00 AT32209 Hydraulic Hose For use on 35 and 50 CE Long Arm option. See Parts 0 September 208
BH BACKHOE ft. Digging Depth Quik-Tatch Mounting 80 Degree Swing Arc Low-profile Console 73 in. (4394 mm) Reach from Swing Pivot 80 Degree Bucket Rotation Select One From Each Required Category 7500T BH BACKHOE For use on the following models: 37-332 SS 38D-332D SS 38E-332E SS CT322, CT332 CTLs 39D-333D CTLs 39E-333E CTLs 320G-324G SSLs - Requires mounting kit BYT033 325G CTL - Requires mounting kit BYT033 330G-333G SSLs and CTLs - Requires mounting kit AT446358 2,770.00 Counterweights recommended. AT428072 hydraulic quick coupler adapter kit is available to adapt all HIGH FLOW E series SSL and CTL machines to standard flow attachment couplers. MOUNTING KITS 007 Mounting Kit with Tie Down Yokes for 37-320, CT322 585.00 009 Mounting Kit with Tie Downs For use on the following models: 38D-320D SS 38E-320E SS 39D-323D CTLs 39E-323E CTLs 249.00 005 Less Mounting Kit No Added Cost 006 Mounting Kit with Tie Down Yokes for 325-332, CT332 585.00 MECHANICAL QUICK COUPLER 300 Less Mechanical Quick Coupler No Added Cost Buckets AT36552B 2 in. HD Quick Coupler Bucket - 3 Teeth 60.00 AT36553B 8 in. HD Quick Coupler Bucket - 4 Teeth 624.00 AT36554B 24 in. HD Quick Coupler Bucket - 4 Teeth 674.00 0 September 208
BH BACKHOE Continued Continued... KV8242 36 in. (94 mm) HD Bucket - 6 Teeth 963.00 2 AT466358 BYT033 AT348835 Backhoe Mounting Kit 330G & 332G SSL 33G & 333G CTL Backhoe Mounting Kit 320G, 324G, 325G Counterweight, Stackable (Single Set) Includes 2-86 lb weights (39 Kg) 9.00 282.00 356.00 KV4620 Rear Weight Bracket Kit (37-320) * Requires Eight R66949Y Weights 96.00 AT332 Rear Weight Bracket Kit (325-332) 99.00 R66949Y Yellow 42lb. Quik-Tatch Weight 6.00 Miscellaneous BM9556 Rubber Street Pad Kit See Parts Tie Down Yokes & Mounting Kits KV2455 Mounting Kit for 37-320, CT322 460.00 KV22699 Mounting Kit for 325-332, CT332 460.00 KV698 Tie Down Yoke for 37-320, CT322 358.00 KV699 Tie Down Yoke for 325-332, CT332 358.00 0 September 208
AH80 BALE HUGGER Bale Hugger is designed for very large bales. It has a maximum opening of 0 inches and will squeeze the bales together to transport, stack or load bales. -Designed with round tubing to provide maximum durability while preventing damage to wrapped bale coverings -Provides constant pressure that eliminates the risk of dropping bales -Right-hand and left-hand sides open and close simultaneously -Can lift, move, and stack round or rectangular bales -Ideal for,000 lb. silage bags with a maximum load of 2,400 lbs. Overall Width cm/(in) 20.65 (47.5) Overall Height cm/(in) 95.25 (37.5) Overall Depth cm/(in) 37.6 (54) Max. Opening cm/(in) 279.40 (0) Lift Capacity kg/(lb.) 088.62 (2,400) Weight kg/(lb.) 27.72 (480) Select One From Each Required Category F.O.B. Dubuque, Iowa 03E0T AH80 BALE HUGGER For use on the following models: 32G-332G SS 38E-332E SS 37G-333G CTL 39E-333E CTL 2,77.00 204K-324K Wheel Loader with Skid Steer Style Coupler. 0 September 208
AB2 SINGLE BALE SPEAR Capacity at Load Center: 907 kg at 0.6 m (2,000 lbs. at 24 in.) Depth:.28 m (50.50 in.) Spear Length:.24 m (49 in.) Weight: 66 kg (45 lbs.) Width:.5 m (42.25 in.) Height: 0.57 m (22.38 in.) Select One From Each Required Category 05A0T AB2 SINGLE BALE SPEAR For use on the following models: 32G-332G SS 38E-332E SS 37G-333G CTLs 39E-333E CTLs 204K, 244J, 304K, 324J CWL 0 TLB 536.00 * With the 244J, the Worksite Pro Skid Steer Style Coupler, AT357576, is required. AT357576 ISO Adapter to Quik Tatch Coupler,584.00 AT348835 Counterweight, Stackable (Single Set) Includes 2-86 lb weights (39 Kg) 356.00 KV4620 Rear Weight Bracket Kit (37-320) * Requires Eight R66949Y Weights 96.00 AT332 Rear Weight Bracket Kit (325-332) 99.00 R66949Y Yellow 42lb. Quik-Tatch Weight 6.00 0 September 208
AB32 DUAL BALE SPEAR Capacity at Load Center: 36 kg at 0.6 m (3,000 lbs. at 24 in.) Depth:.42 m (55.75 in.) Spear Length:.35 m (53 in.) Weight: 9 kg (200 lbs.) Width:.24 m (48.75 in.) Height: 0.64 m (25.00 in.) Select One From Each Required Category 05B0T AB32 DUAL BALE SPEAR For use on the following models: 32G-332G SS 38E-332E SS 37G-333G CTLs 39E-333E CTLs 204K, 244J, 304K, 324J CWL 0 TLB 645.00 * With the 244J, the Worksite Pro Skid Steer Style Coupler, AT357576, is required. AT357576 ISO Adapter to Quik Tatch Coupler,584.00 AT348835 Counterweight, Stackable (Single Set) Includes 2-86 lb weights (39 Kg) 356.00 KV4620 Rear Weight Bracket Kit (37-320) * Requires Eight R66949Y Weights 96.00 AT332 Rear Weight Bracket Kit (325-332) 99.00 R66949Y Yellow 42lb. Quik-Tatch Weight 6.00 0 September 208
AB3 SINGLE BALE SPEAR, HD Capacity at Load Center: 36 kg at 0.6 m (3,000 lbs. at 24 in.) Depth:.28 m (50.50in.) Spear Length:.24 m (49in.) Weight: 70 kg (55 lbs.) Width:.5 m (42.25 in.) Height: 0.59 m (23.3 in.) Select One From Each Required Category 05C0T AB3 SINGLE BALE SPEAR, HD For use on the following models: 32G-332G SS 38E-332E SS 37G-333G CTLs 39E-333E CTLs 204K, 244J, 304K, 324J CWL 0 TLB 657.00 * With the 244J, the Worksite Pro Skid Steer Style Coupler, AT357576, is required. AT357576 ISO Adapter to Quik Tatch Coupler,584.00 AT348835 Counterweight, Stackable (Single Set) Includes 2-86 lb weights (39 Kg) 356.00 KV4620 Rear Weight Bracket Kit (37-320) * Requires Eight R66949Y Weights 96.00 AT332 Rear Weight Bracket Kit (325-332) 99.00 R66949Y Yellow 42lb. Quik-Tatch Weight 6.00 0 September 208
AB42 DUAL BALE SPEAR, HD Capacity at Load Center: 84 kg at 0.6 m (4,000 lbs. at 24 in.) Depth:.42 m (55.75 in.) Spear Length:.35 m (53 in.) Weight: 09 kg (240 lbs.) Width:.24 m (48.75 in.) Height: 0.64 m (25.00 in.) Select One From Each Required Category 05D0T AB42 DUAL BALE SPEAR, HD For use on the following models: 32G-332G SS 38E-332E SS 37G-333G CTLs 39E-333E CTLs 204K, 244J, 304K, 324J CWL 0 TLB 750.00 * With the 244J, the Worksite Pro Skid Steer Style Coupler, AT357576, is required. AT357576 ISO Adapter to Quik Tatch Coupler,584.00 AT348835 Counterweight, Stackable (Single Set) Includes 2-86 lb weights (39 Kg) 356.00 KV4620 Rear Weight Bracket Kit (37-320) * Requires Eight R66949Y Weights 96.00 AT332 Rear Weight Bracket Kit (325-332) 99.00 R66949Y Yellow 42lb. Quik-Tatch Weight 6.00 0 September 208
AB43 TRIPLE BALE SPEAR Capacity at Load Center: 84 kg at 0.6 m (4,000 lbs. at 24 in.) Depth:.33 m (52.25 in.) Spear Length:.24 m (49 in.) Weight: 02 kg (225 lbs.) Width:.42 m (56.00 in.) Height: 0.62 m (24.25 in.) Select One From Each Required Category 05E0T AB43 TRIPLE BALE SPEAR For use on the following models: 32G-332G SS 38E-332E SS 37G-333G CTLs 39E-333E CTLs 204K, 244J, 304K, 324J CWL 0 TLB 900.00 * With the 244J, the Worksite Pro Skid Steer Style Coupler, AT357576, is required. AT357576 ISO Adapter to Quik Tatch Coupler,584.00 AT348835 Counterweight, Stackable (Single Set) Includes 2-86 lb weights (39 Kg) 356.00 KV4620 Rear Weight Bracket Kit (37-320) * Requires Eight R66949Y Weights 96.00 AT332 Rear Weight Bracket Kit (325-332) 99.00 R66949Y Yellow 42lb. Quik-Tatch Weight 6.00 0 September 208
BALE SPEAR, SQUARE No Base Equipment Provided. Select One From Each Required Category 9350T BALE SPEAR, SQUARE For use on the following models: 32G-332G SS 38E-332E SS 37G-333G CTLs 39E-333E CTLs 204K, 244J, 304K, 324J CWL 954.00 * With the 244J, the Worksite Pro Skid Steer Style Coupler, AT357576, is required. AT357576 ISO Adapter to Quik Tatch Coupler,584.00 AT348835 Counterweight, Stackable (Single Set) Includes 2-86 lb weights (39 Kg) 356.00 KV4620 Rear Weight Bracket Kit (37-320) * Requires Eight R66949Y Weights 96.00 AT332 Rear Weight Bracket Kit (325-332) 99.00 R66949Y Yellow 42lb. Quik-Tatch Weight 6.00 0 September 208
BA72 ANGLE BROOM Specifications: 0-28 gpm Hydraulic Flow 50/50 Poly Wire Brush 32 in. Diameter Brush Angle Control: Hydraulic Angling Electronically Activated 30 Degrees Either Direction From Center Standard Equipment: Jackstands Rubber Dirt Deflector 72 in. Straight Sweeping Width 62.5 in. Angled Sweeping Width 87 in. Overall Straight Width 83 in. Overall Angled Width NOTE: Applicable Control Kit is Required Select One From Each Required Category FOB Dubuque,Iowa. 0300KV BA72 ANGLE BROOM For use on the following models: 32-38G SS 33-332 SS 38D-332D SS 38E-332E SS CT35-CT332 CTLs 37G CTL 39D-333D CTLs 39E-333E CTLs 6,209.00 AT428072 hydraulic quick coupler adapter kit is available to adapt all HIGH FLOW E series SSL and CTL machines to standard flow attachment couplers. KV2995 2 Volt Demonstration Kit 3-pin connector 34.00 KV25224 2 Volt Receptacle Kit (with Traditional Controls) (300 Series) 3-pin connector 77.00 AT427986 Control For E series (models 328, 329, 332, and 333) with EH controls (0950, 0975, 0980, and 0990). Includes 3-pin and 4-pin connector. Replaces existing handles. 45.00 AT394637 Control (with E-H Joystick Controls without Joystick Buttons) D Series (S/N 98376 and above) For use with E-H Controls without Joystick Buttons For use with E-H Joystick Controls (0950) Includes 3-pin and 4-pin connector Replaces existing handles 460.00 0 September 208
2 BA72 ANGLE BROOM Continued AT348477 Continued... Control (with E-H Joystick Controls) D Series (S/N 98376 and above) For use with E-H Joystick Controls (0950) Includes 3-pin and 4-pin connector 260.00 AT348475 Control (with Foot, Hand Controls) * For D Series with Foot Controls (0900) or Hand Controls (0925) * Includes 3-pin and 4-pin connector * Replaces existing handles 78.00 AT339786 Control (with Joystick Controls) (300 Series) 4-pin connector and 3-pin connector included 245.00 AT427985 Control Kit For E series (models 38, 39, 320, 323, and 326) with manual control with Foot Controls (0900) or Hand Controls (0925) OR with EH controls (0950, 0975, 0980, and 0990).Includes 3-pin and 4-pin connector. Replaces existing handles. 728.00 AT43529 Water Tank Kit SSL: 38D-332D 38E-332E 330G-332G CTL: 39D-333D 39E-333E 33G-333G For use with spray bar. 30 gallon capacity.,829.00 AT34522 Water Tank Kit (37-332, CT322-CT332) For use with spray bar. 30 gallon capacity.,328.00 Kits and Accessories AT332454 2 Volt Receptacle Kit 204.00 AT349599 Broom Spray Bar, 72 in. 66.00 AT323246 Dual Motor Kit For serial #s T0BA72X7000 through T0BA72XAB000043 and T0BA84X7000 through T0BA84XCB000057. For below serial #s T0BA72X7000 and T0BA84X7000, order Dual Motor Kit components from Parts. Installation instructions T2637.,087.00 0 September 208
BA84 ANGLE BROOM Specifications: 0-28 gpm Hydraulic Flow 50/50 Poly Wire Brush 32 in. Diameter Brush Angle Control: Hydraulic Angling Electronically Activated 30 Degrees Either Direction From Center Standard Equipment: Jackstands Rubber Dirt Deflector 84 in. Straight Sweeping Width 73 in. Angled Sweeping Width 99 in. Overall Straight Width 93.5 in. Overall Angled Width NOTE: Applicable Control Kit Required Select One From Each Required Category FOB Dubuque,Iowa. 030KV BA84 ANGLE BROOM For use on the following models: 37-332 SS 38D-332D SS 38E-332E SS CT322, CT332 CTLs 37G CTL 39D-333D CTLs 39E-333E CTLs 6,400.00 AT428072 hydraulic quick coupler adapter kit is available to adapt all HIGH FLOW E series SSL and CTL machines to standard flow attachment couplers. KV2995 2 Volt Demonstration Kit 3-pin connector 34.00 KV25224 2 Volt Receptacle Kit (with Traditional Controls) (300 Series) 3-pin connector 77.00 AT427986 Control For E series (models 328, 329, 332, and 333) with EH controls (0950, 0975, 0980, and 0990). Includes 3-pin and 4-pin connector. Replaces existing handles. 45.00 AT394637 Control (with E-H Joystick Controls without Joystick Buttons) D Series (S/N 98376 and above) For use with E-H Controls without Joystick Buttons For use with E-H Joystick Controls (0950) Includes 3-pin and 4-pin connector Replaces existing handles 460.00 0 September 208
2 BA84 ANGLE BROOM Continued AT348477 Continued... Control (with E-H Joystick Controls) D Series (S/N 98376 and above) For use with E-H Joystick Controls (0950) Includes 3-pin and 4-pin connector 260.00 AT348475 Control (with Foot, Hand Controls) * For D Series with Foot Controls (0900) or Hand Controls (0925) * Includes 3-pin and 4-pin connector * Replaces existing handles 78.00 AT339786 Control (with Joystick Controls) (300 Series) 4-pin connector and 3-pin connector included 245.00 AT427985 Control Kit For E series (models 38, 39, 320, 323, and 326) with manual control with Foot Controls (0900) or Hand Controls (0925) OR with EH controls (0950, 0975, 0980, and 0990).Includes 3-pin and 4-pin connector. Replaces existing handles. 728.00 AT43529 Water Tank Kit SSL: 38D-332D 38E-332E 330G-332G CTL: 39D-333D 39E-333E 33G-333G For use with spray bar. 30 gallon capacity.,829.00 AT34522 Water Tank Kit (37-332, CT322-CT332) For use with spray bar. 30 gallon capacity.,328.00 Kits and Accessories AT349600 Broom Spray Bar, 84 in. 708.00 AT323246 Dual Motor Kit For serial #s T0BA72X7000 through T0BA72XAB000043 and T0BA84X7000 through T0BA84XCB000057. For below serial #s T0BA72X7000 and T0BA84X7000, order Dual Motor Kit components from Parts. Installation instructions T2637.,087.00 0 September 208
BA72C 72" Angle Broom. Select One From Each Required Category FOB Dubuque,Iowa. 0302KV BA72C 72" Angle Broom 32GR - 332G SSLs 37G - 333G CTLs 7,006.00 AT43529 Water Tank Kit SSL: 38D-332D 38E-332E 330G-332G CTL: 39D-333D 39E-333E 33G-333G For use with spray bar. 30 gallon capacity.,829.00 AT34522 Water Tank Kit (37-332, CT322-CT332) For use with spray bar. 30 gallon capacity.,328.00 Kits and Accessories BYT026 80 Degree Hood Extension Kit 998.00 AT495468 AT49547 Bristle Replacement Kit 50/50 Wire/Poly Mix Bristle Replacement Kit All Polypropylene 543.00 569.00 BYT025 Nozzle Kit 248.00 0 September 208
BA84C 84" Angle Broom. Select One From Each Required Category FOB Dubuque,Iowa. 0303KV BA84C 84" Angle Broom 320G - 332G SSLs 325G - 333G CTLs 7,200.00 AT43529 Water Tank Kit SSL: 38D-332D 38E-332E 330G-332G CTL: 39D-333D 39E-333E 33G-333G For use with spray bar. 30 gallon capacity.,829.00 AT34522 Water Tank Kit (37-332, CT322-CT332) For use with spray bar. 30 gallon capacity.,328.00 Kits and Accessories BYT027 80 Degree Hood Extension Kit 998.00 AT495469 AT495472 Bristle Replacement Kit 50/50 Wire/Poly Mix Bristle Replacement Kit All Polypropylene 628.00 58.00 BYT025 Nozzle Kit 248.00 0 September 208
BA96C 96" Angle Broom. Select One From Each Required Category FOB Dubuque,Iowa. 0304KV BA96C 96" Angle Broom 330G - 332G SSLs 33G - 333G CTLs 7,393.00 AT43529 Water Tank Kit SSL: 38D-332D 38E-332E 330G-332G CTL: 39D-333D 39E-333E 33G-333G For use with spray bar. 30 gallon capacity.,829.00 AT34522 Water Tank Kit (37-332, CT322-CT332) For use with spray bar. 30 gallon capacity.,328.00 Kits and Accessories BYT028 80 Degree Hood Extension Kit 998.00 AT495470 AT495473 Bristle Replacement Kit 50/50 Wire/Poly Mix Bristle Replacement Kit All Polypropylene 75.00 644.00 BYT025 Nozzle Kit 248.00 0 September 208
BP72 PICK-UP BROOM Specifications: 0-28 gpm Hydraulic Flow 50/50 Poly Wire Brush 25 in. Diameter Brush Standard Equipment: 2 Caster Wheels for Better Stability Baffle to Material in Bucket Infinite Brush Height Specifications: 72 in. Sweeping Width 86 in. Overall Width 88 in. Sweeping Width with Gutter Brush 4.3 Cubic Feet Hopper Capacity Select One From Each Required Category FOB Dubuque,Iowa. 030KV BP72 PICK-UP BROOM For use on the following models: 34-38G SS 33-332 SS 38D-332D SS 38E-332E SS CT35-CT332 CTLs 37G CTL 39D-333D CTLs 39E-333E CTLs 5,923.00 AT428072 hydraulic quick coupler adapter kit is available to adapt all HIGH FLOW E series SSL and CTL machines to standard flow attachment couplers. AT43529 Water Tank Kit SSL: 38D-332D 38E-332E 330G-332G CTL: 39D-333D 39E-333E 33G-333G For use with spray bar. 30 gallon capacity.,829.00 AT34522 Water Tank Kit (37-332, CT322-CT332) For use with spray bar. 30 gallon capacity.,328.00 Kits and Accessories AT349599 Broom Spray Bar, 72 in. 66.00 KV2366 Second Gutter Brush * Must also order Single Gutter Brush to complete,88.00 KV23660 Single Gutter Brush,853.00 0 September 208
BP84 PICK-UP BROOM Specifications: 0-28 gpm Hydraulic Flow 50/50 Poly Wire Brush 25 in. Diameter Brush Standard Equipment: 2 Caster Wheels for Better Stability Baffle to Material in Bucket Infinite Brush Height Specifications: 84 in. Sweeping Width 98 in. Overall Width 00 in. Sweeping Width with Gutter Brush 6.7 Cubic Feet Hopper Capacity Select One From Each Required Category FOB Dubuque,Iowa. 03KV BP84 PICK-UP BROOM For use on the following models: 37-332 SS 38D-332D SS 38E-332E SS CT322, CT332 CTLs 37G CTL 39D-333D CTLs 39E-333E CTLs 7,06.00 AT428072 hydraulic quick coupler adapter kit is available to adapt all HIGH FLOW E series SSL and CTL machines to standard flow attachment couplers. AT43529 Water Tank Kit SSL: 38D-332D 38E-332E 330G-332G CTL: 39D-333D 39E-333E 33G-333G For use with spray bar. 30 gallon capacity.,829.00 AT34522 Water Tank Kit (37-332, CT322-CT332) For use with spray bar. 30 gallon capacity.,328.00 Kits and Accessories AT349600 Broom Spray Bar, 84 in. 708.00 KV2366 Second Gutter Brush * Must also order Single Gutter Brush to complete,88.00 KV23660 Single Gutter Brush,853.00 0 September 208
BR60 RIGID PICK-UP BROOM TO BE DELIVERED. Select One From Each Required Category FOB Dubuque,Iowa. 7820T BR60 RIGID PICK-UP BROOM For use on the following models: 32-38G SS 33-35 SS CT35 CTL 37G CTL 4,6.00 AT43529 Water Tank Kit SSL: 38D-332D 38E-332E 330G-332G CTL: 39D-333D 39E-333E 33G-333G For use with spray bar. 30 gallon capacity.,829.00 Kits and Accessories AT349598 Broom Spray Bar, 60 in. 640.00 KV2366 Second Gutter Brush,88.00 KV23660 Single Gutter Brush,853.00 0 September 208
BR72 RIGID PICK-UP BROOM Specifications: 0-30 gpm (37.8-3.5 lpm) Hydraulic Flow 50/50 Poly Wire Brush 25 in. (635 mm) Diameter Brush 6.38 in. (62 mm) Core Diameter Forward & Backward Operation 72 in. (828 mm) Sweeping Width 86. in. (287 mm) Working Width 88 in. (284 mm)sweeping Width with Gutter Brush 5.75 cu. ft. (0.45 cu m) Hopper Capacity Dimensions: 29 in. (736 mm) Height 53.3 in. (354 mm) Length Operating Width: 950 lbs. (43 kg) Select One From Each Required Category FOB Dubuque,Iowa. 520T BR72 RIGID PICK-UP BROOM 32-38G SS 33-332 SS 38D-332D SS 38E-332E SS CT35-CT332 CTLs 39D-333D CTLs 37G CTL 39E-333E CTLs 204K, 304K CWL 0 TLB 4,533.00 AT428072 hydraulic quick coupler adapter kit is available to adapt all HIGH FLOW E series SSL and CTL machines to standard flow attachment couplers. AT43529 Water Tank Kit SSL: 38D-332D 38E-332E 330G-332G CTL: 39D-333D 39E-333E 33G-333G For use with spray bar. 30 gallon capacity.,829.00 AT34522 Water Tank Kit (37-332, CT322-CT332) For use with spray bar. 30 gallon capacity.,328.00 Kits and Accessories AT349599 Broom Spray Bar, 72 in. 66.00 KV2366 Second Gutter Brush * Must also order Single Gutter Brush to complete,88.00 0 September 208
BR72 RIGID PICK-UP BROOM Continued Continued... KV23660 Single Gutter Brush,853.00 2 0 September 208
BR84 RIGID PICK-UP BROOM Specifications: 0-30 gpm (37.8-3.5 lpm) Hydraulic Flow 50/50 Poly Wire Brush 25 in. (635 mm) Diameter Brush 6.38 in. (62 mm) Core Diameter Forward & Backward Operation 84 in. (233 mm) Sweeping Width 98. in. (2492 mm) Working Width 00 in. (2540 mm) Sweeping Width with Gutter Brush 8.2 cu. ft. (0.52 cu m) Hopper Capacity Dimensions: 29 in. (736 mm) Height 53.3 in. (354 mm) Length Operating Width: 050 lbs. (476 kg) Select One From Each Required Category FOB Dubuque,Iowa. 530T BR84 RIGID PICK-UP BROOM For use on the following models: 37-332 SS 38D-332D 38E-332E CT322, CT332 CTLs 37G CTL 39D-333D CTLs 39E-333E CTLs 204K, 244J, 304K, 324J CWL 4,952.00 * With the 244J, the Worksite Pro Skid Steer Style Coupler, AT357576, is required. AT428072 hydraulic quick coupler adapter kit is available to adapt all HIGH FLOW E series SSL and CTL machines to standard flow attachment couplers. AT357576 ISO Adapter to Quik Tatch Coupler,584.00 AT43529 Water Tank Kit SSL: 38D-332D 38E-332E 330G-332G CTL: 39D-333D 39E-333E 33G-333G For use with spray bar. 30 gallon capacity.,829.00 AT34522 Water Tank Kit (37-332, CT322-CT332) For use with spray bar. 30 gallon capacity.,328.00 Kits and Accessories AT349600 Broom Spray Bar, 84 in. 708.00 0 September 208
2 BR84 RIGID PICK-UP BROOM Continued KV2366 Continued... Second Gutter Brush * Must also order Single Gutter Brush to complete,88.00 KV23660 Single Gutter Brush,853.00 0 September 208
BP72C 72" Pick-Up Broom. Select One From Each Required Category FOB Dubuque,Iowa. 034KV BP72C 72" Pick-Up Broom 32GR - 332G SSL 37G - 333G CTL 6,653.00 AT43529 Water Tank Kit SSL: 38D-332D 38E-332E 330G-332G CTL: 39D-333D 39E-333E 33G-333G For use with spray bar. 30 gallon capacity.,829.00 AT34522 Water Tank Kit (37-332, CT322-CT332) For use with spray bar. 30 gallon capacity.,328.00 Kits and Accessories T4540 Bolt-on Cutting Edge Kit 50.00 AT495475 AT495478 AT49573 AT49574 Bristle Replacement Kit 50/50 Wire/Poly Mix Bristle Replacement Kit All Polypropylene Gutter Broom Bristle Replacement Kit All Wire Gutter Broom Bristle Replacement Kit All Polypropylene 536.00 447.00 75.00 75.00 BYT030 Gutter Broom Kit,20.00 BYT025 Nozzle Kit 248.00 BYT033 Water Tank Kit - Broom Mounted 72.00 0 September 208
BP84C 84" Pick-Up Broom. Select One From Each Required Category FOB Dubuque,Iowa. 035KV BP84C 84" Pick-Up Broom 32GR - 332G SSLs 37G - 333G CTLs 7,735.00 AT43529 Water Tank Kit SSL: 38D-332D 38E-332E 330G-332G CTL: 39D-333D 39E-333E 33G-333G For use with spray bar. 30 gallon capacity.,829.00 AT34522 Water Tank Kit (37-332, CT322-CT332) For use with spray bar. 30 gallon capacity.,328.00 Kits and Accessories T454 Bolt-on Cutting Edge Kit 70.00 AT495476 AT495479 AT49573 AT49574 Bristle Replacement Kit 50/50 Wire/Poly Mix Bristle Replacement Kit All Polypropylene Gutter Broom Bristle Replacement Kit All Wire Gutter Broom Bristle Replacement Kit All Polypropylene 642.00 536.00 75.00 75.00 BYT030 Gutter Broom Kit,20.00 BYT025 Nozzle Kit 248.00 BYT033 Water Tank Kit - Broom Mounted 72.00 0 September 208
BR60C 60" Rigid Pick-Up Broom. Select One From Each Required Category FOB Dubuque,Iowa. 8202T BR60C 60" Rigid Pick-Up Broom 32GR - 332G SSLs 37G - 333G CTLs 4,583.00 AT43529 Water Tank Kit SSL: 38D-332D 38E-332E 330G-332G CTL: 39D-333D 39E-333E 33G-333G For use with spray bar. 30 gallon capacity.,829.00 AT34522 Water Tank Kit (37-332, CT322-CT332) For use with spray bar. 30 gallon capacity.,328.00 Kits and Accessories T45740 Bolt-on Cutting Edge Kit 200.00 AT495474 AT495477 AT49573 AT49574 Bristle Replacement Kit 50/50 Wire/Poly Mix Bristle Replacement Kit All Polypropylene Gutter Broom Bristle Replacement Kit All Wire Gutter Broom Bristle Replacement Kit All Polypropylene 433.00 383.00 75.00 75.00 BYT030 Gutter Broom Kit,20.00 BYT025 Nozzle Kit 248.00 BYT033 Water Tank Kit - Broom Mounted 72.00 0 September 208
BR72C 72" Rigid Pick-Up Broom. Select One From Each Required Category FOB Dubuque,Iowa. 52T BR72C 72" Rigid Pick-Up Broom 32GR - 332G SSLs 37G - 333G CTLs 204K & 304K CWLs 4,982.00 AT43529 Water Tank Kit SSL: 38D-332D 38E-332E 330G-332G CTL: 39D-333D 39E-333E 33G-333G For use with spray bar. 30 gallon capacity.,829.00 AT34522 Water Tank Kit (37-332, CT322-CT332) For use with spray bar. 30 gallon capacity.,328.00 Kits and Accessories T45738 Bolt-on Cutting Edge Kit 220.00 AT495475 AT495478 AT49573 AT49574 Bristle Replacement Kit 50/50 Wire/Poly Mix Bristle Replacement Kit All Polypropylene Gutter Broom Bristle Replacement Kit All Wire Gutter Broom Bristle Replacement Kit All Polypropylene 536.00 447.00 75.00 75.00 BYT030 Gutter Broom Kit,20.00 BYT025 Nozzle Kit 248.00 BYT033 Water Tank Kit - Broom Mounted 72.00 0 September 208
BR84C 84" Rigid Pick-Up Broom. Select One From Each Required Category FOB Dubuque,Iowa. 53T BR84C 84" Rigid Pick-Up Broom 32GR - 332G SSLs 37G - 333G CTLs 204K, 244K-II, 304K, & 324K CWLs 5,382.00 AT43529 Water Tank Kit SSL: 38D-332D 38E-332E 330G-332G CTL: 39D-333D 39E-333E 33G-333G For use with spray bar. 30 gallon capacity.,829.00 AT34522 Water Tank Kit (37-332, CT322-CT332) For use with spray bar. 30 gallon capacity.,328.00 Kits and Accessories T45739 Bolt-on Cutting Edge Kit 240.00 AT495476 AT495479 AT49573 AT49574 Bristle Replacement Kit 50/50 Wire/Poly Mix Bristle Replacement Kit All Polypropylene Gutter Broom Bristle Replacement Kit All Wire Gutter Broom Bristle Replacement Kit All Polypropylene 642.00 536.00 75.00 75.00 BYT030 Gutter Broom Kit,20.00 BYT025 Nozzle Kit 248.00 BYT033 Water Tank Kit - Broom Mounted 72.00 0 September 208
CP2D COLD PLANER Drum Size: 2 in. (305 mm) Cutting Width Design Features: Standard Flow Hydraulics 5-22 gpm (56-83 lpm) Planetary Drive Manual Tilt of +/- Degrees Manual Depth Control 0-5 in. (0-27 mm) Hydraulic Side Shift 0-9 in. (0-483 mm) Quantity of pics 37 Spray Bar with nozzles, less water tank NOTE: The eight-button control handle is NOT required. Select One From Each Required Category F.O.B. Dubuque, Iowa 82T CP2D COLD PLANER For Standard Flow: 36-38G SS 35-328 SS 38D-328D 38E-328E 36GR - 324G CT35, CT322 CTLs 39D-323D CTLs 39E-323E CTLs 0,2.00 AT428072 hydraulic quick coupler adapter kit is available to adapt all HIGH FLOW E series SSL and CTL machines to standard flow attachment couplers. PICK KIT 00 General Purpose Will do both concrete and asphalt, but will wear out in concrete. 002 RP8 Asphalt only. No Added Cost No Added Cost AT427986 AT394637 Control For E series (models 328, 329, 332, and 333) with EH controls (0950, 0975, 0980, and 0990). Includes 3-pin and 4-pin connector. Replaces existing handles. Control (with E-H Joystick Controls without Joystick Buttons) D Series (S/N 98376 and above) For use with E-H Controls without Joystick Buttons For use with E-H Joystick Controls (0950) Includes 3-pin and 4-pin connector Replaces existing handles 45.00 460.00 0 September 208
2 CP2D COLD PLANER Continued AT427985 Continued... Control Kit For E series (models 38, 39, 320, 323, and 326) with manual control with Foot Controls (0900) or Hand Controls (0925) OR with EH controls (0950, 0975, 0980, and 0990).Includes 3-pin and 4-pin connector. Replaces existing handles. 728.00 AT462795 Carbide Cutting Tools, General Purpose Will do both concrete and asphalt, but will wear out in concrete. 443.00 AT462796 Carbide Cutting Tools, RP8 Asphalt only. 378.00 AT43529 Water Tank Kit For use with spray bar. 30 gallon capacity. Use for D-Series, E-Series and G-Series.,829.00 AT34522 Water Tank Kit (37-332, CT322-CT332) For use with spray bar. 30 gallon capacity. Use for 300 Series.,328.00 0 September 208
CP8D COLD PLANER Drum Size: 8 in. (457 mm) Cutting Width Design Features: High Flow Hydraulics 29-4 gpm (0-55 lpm) Planetary Drive Tilt of +/- 8 Degrees Depth Control 0-5 in. (0-27 mm) Hydraulic Side Shift -3-22 in. (-76-559 mm) Quantity of pics 45 Spray Bar with nozzles, less water tank NOTE: Hi-Flow Hyrdraulics and Applicable Control Kit are Required. Select One From Each Required Category F.O.B. Dubuque, Iowa 822T CP8D COLD PLANER For High Flow: 320-332 SS 320D-332D SS 320E-332E SS 324G SS CT322, CT332 CTLs 323D-333D CTLs 323E-333E CTLs 20,306.00 PICK KIT 005 General Purpose Will do both concrete and asphalt, but will wear out in concrete. 006 RP8 Asphalt only. No Added Cost No Added Cost AT427986 AT394637 AT348477 Control For E series (models 328, 329, 332, and 333) with EH controls (0950, 0975, 0980, and 0990). Includes 3-pin and 4-pin connector. Replaces existing handles. Control (with E-H Joystick Controls without Joystick Buttons) D Series (S/N 98376 and above) For use with E-H Controls without Joystick Buttons For use with E-H Joystick Controls (0950) Includes 3-pin and 4-pin connector Replaces existing handles Control (with E-H Joystick Controls) D Series (S/N 98376 and above) For use with E-H Joystick Controls (0950) Includes 3-pin and 4-pin connector 45.00 460.00 260.00 0 September 208
2 CP8D COLD PLANER Continued AT348475 Continued... Control (with Foot, Hand Controls) * For D Series with Foot Controls (0900) or Hand Controls (0925) * Includes 3-pin and 4-pin connector * Replaces existing handles 78.00 AT320590 Control (with Foot, Hand Controls) (37-332, CT322-CT332) * 4-pin connector * Includes 8-Button Control Handle 808.00 AT339786 Control (with Joystick Controls) (300 Series) 4-pin connector and 3-pin connector included 245.00 AT427985 Control Kit For E series (models 38, 39, 320, 323, and 326) with manual control with Foot Controls (0900) or Hand Controls (0925) OR with EH controls (0950, 0975, 0980, and 0990).Includes 3-pin and 4-pin connector. Replaces existing handles. 728.00 AT462797 Carbide Cutting Tools, General Purpose Will do both concrete and asphalt, but will wear out in concrete. 53.00 AT462798 Carbide Cutting Tools, RP8 Asphalt only. 452.00 AT43529 Water Tank Kit For use with spray bar. 30 gallon capacity. Use for D-Series, E-Series and G-Series.,829.00 AT34522 Water Tank Kit (37-332, CT322-CT332) For use with spray bar. 30 gallon capacity. Use for 300 Series.,328.00 0 September 208
CP24D COLD PLANER Drum Size: 24 in. (60 mm) Cutting Width Design Features: High Flow Hydraulics 29-4 gpm (0-55 lpm) Planetary Drive Tilt of +/- 8 Degrees Depth Control 0-5 in. (0-27 mm) Hydraulic Side Shift -3-22 in. (-76-559 mm) Quantity of pics 57 Spray Bar with nozzles, less water tank NOTE: Hi-Flow Hyrdraulics and Applicable Control Kit are Required. Select One From Each Required Category F.O.B. Dubuque, Iowa 823T CP24D COLD PLANER For High Flow: 325-332 SS 326D-332D SS 326E-332E SS CT332 CTL 329D, 333D CTLs 329E, 333E CTLs 23,279.00 PICK KIT 009 General Purpose Will do both concrete and asphalt, but will wear out in concrete. 00 RP8 Asphalt only. No Added Cost No Added Cost AT427986 AT394637 AT348477 Control For E series (models 328, 329, 332, and 333) with EH controls (0950, 0975, 0980, and 0990). Includes 3-pin and 4-pin connector. Replaces existing handles. Control (with E-H Joystick Controls without Joystick Buttons) D Series (S/N 98376 and above) For use with E-H Controls without Joystick Buttons For use with E-H Joystick Controls (0950) Includes 3-pin and 4-pin connector Replaces existing handles Control (with E-H Joystick Controls) D Series (S/N 98376 and above) For use with E-H Joystick Controls (0950) Includes 3-pin and 4-pin connector 45.00 460.00 260.00 0 September 208
2 CP24D COLD PLANER Continued AT348475 Continued... Control (with Foot, Hand Controls) * For D Series with Foot Controls (0900) or Hand Controls (0925) * Includes 3-pin and 4-pin connector * Replaces existing handles 78.00 AT320590 Control (with Foot, Hand Controls) (37-332, CT322-CT332) * 4-pin connector * Includes 8-Button Control Handle 808.00 AT339786 Control (with Joystick Controls) (300 Series) 4-pin connector and 3-pin connector included 245.00 AT427985 Control Kit For E series (models 38, 39, 320, 323, and 326) with manual control with Foot Controls (0900) or Hand Controls (0925) OR with EH controls (0950, 0975, 0980, and 0990).Includes 3-pin and 4-pin connector. Replaces existing handles. 728.00 AT462799 Carbide Cutting Tools, General Purpose Will do both concrete and asphalt, but will wear out in concrete. 672.00 AT462800 Carbide Cutting Tools, RP8 Asphalt only. 570.00 AT43529 Water Tank Kit For use with spray bar. 30 gallon capacity. Use for D-Series, E-Series and G-Series.,829.00 AT34522 Water Tank Kit (37-332, CT322-CT332) For use with spray bar. 30 gallon capacity. Use for 300 Series.,328.00 0 September 208
CP30D COLD PLANER Drum Size: 30 in. (762 mm) Cutting Width Design Features: High Flow Hydraulics 29-4 gpm (0-55 lpm) Planetary Drive Tilt of +/- 8 Degrees Depth Control 0-5 in. (0-27 mm) Hydraulic Side Shift -3-22 in. (-76-559 mm) Quantity of pics 69 Spray Bar with nozzles, less water tank NOTE: Hi-Flow Hyrdraulics and Applicable Control Kit are Required. Select One From Each Required Category F.O.B. Dubuque, Iowa 90T CP30D COLD PLANER For High Flow: 325-332 SS 326D-332D SS 326E-332E SS CT332 CTL 329D, 333D CTLs 329E, 333E CTLs 24,62.00 PICK KIT 03 General Purpose Will do both concrete and asphalt, but will wear out in concrete. 04 RP8 Asphalt only. No Added Cost No Added Cost AT427986 AT394637 AT348477 Control For E series (models 328, 329, 332, and 333) with EH controls (0950, 0975, 0980, and 0990). Includes 3-pin and 4-pin connector. Replaces existing handles. Control (with E-H Joystick Controls without Joystick Buttons) D Series (S/N 98376 and above) For use with E-H Controls without Joystick Buttons For use with E-H Joystick Controls (0950) Includes 3-pin and 4-pin connector Replaces existing handles Control (with E-H Joystick Controls) D Series (S/N 98376 and above) For use with E-H Joystick Controls (0950) Includes 3-pin and 4-pin connector 45.00 460.00 260.00 0 September 208
2 CP30D COLD PLANER Continued AT348475 Continued... Control (with Foot, Hand Controls) * For D Series with Foot Controls (0900) or Hand Controls (0925) * Includes 3-pin and 4-pin connector * Replaces existing handles 78.00 AT320590 Control (with Foot, Hand Controls) (37-332, CT322-CT332) * 4-pin connector * Includes 8-Button Control Handle 808.00 AT339786 Control (with Joystick Controls) (300 Series) 4-pin connector and 3-pin connector included 245.00 AT427985 Control Kit For E series (models 38, 39, 320, 323, and 326) with manual control with Foot Controls (0900) or Hand Controls (0925) OR with EH controls (0950, 0975, 0980, and 0990).Includes 3-pin and 4-pin connector. Replaces existing handles. 728.00 AT46280 Carbide Cutting Tools, General Purpose Will do both concrete and asphalt, but will wear out in concrete. 806.00 AT462802 Carbide Cutting Tools, RP8 Asphalt only. 72.00 AT43529 Water Tank Kit For use with spray bar. 30 gallon capacity. Use for D-Series, E-Series and G-Series.,829.00 AT34522 Water Tank Kit (37-332, CT322-CT332) For use with spray bar. 30 gallon capacity. Use for 300 Series.,328.00 0 September 208
DB84 DOZER BLADE Overall width: 84.0 in. (233 mm) Length: 3.5 in. (800 mm) Blade height: 24.0 in. (60 mm) Blade width (full angle): 74. in. (882 mm) Cutting edge (reversible): 0.625 x 6 in. (6 x 53 mm) Degrees of angle: 30, right or left Degrees of tilt: 0, up or down Adjustable skid shoe: Standard Comes Standard with 3 Pin Wire Harness Select One From Each Required Category F.O.B. Dubuque, Iowa 9780T DB84 DOZER BLADE 38G-324G SS 38E-326E SS 37G, 325G CTL 39E, 323E CTL 6,30.00 AT428072 hydraulic quick coupler adapter kit is available to adapt all HIGH FLOW E series SSL and CTL machines to standard flow attachment couplers. KV2995 2 Volt Demonstration Kit 3-pin connector 34.00 KV25224 2 Volt Receptacle Kit (with Traditional Controls) (300 Series) 3-pin connector 77.00 AT33690 4 Pin Wire Harness Adapter (300 Series) For use when equipped with an Control (with Traditional Controls), AT320590 For use when equipped with an Eight Button Control Handle, AT320590 See Parts AT427986 Control For E series (models 328, 329, 332, and 333) with EH controls (0950, 0975, 0980, and 0990). Includes 3-pin and 4-pin connector. Replaces existing handles. 45.00 AT394637 Control (with E-H Joystick Controls without Joystick Buttons) D Series (S/N 98376 and above) For use with E-H Controls without Joystick Buttons For use with E-H Joystick Controls (0950) Includes 3-pin and 4-pin connector Replaces existing handles 460.00 AT348477 Control (with E-H Joystick Controls) D Series (S/N 98376 and above) For use with E-H Joystick Controls (0950) Includes 3-pin and 4-pin connector 260.00 0 September 208
2 DB84 DOZER BLADE Continued AT348475 Continued... Control (with Foot, Hand Controls) * For D Series with Foot Controls (0900) or Hand Controls (0925) * Includes 3-pin and 4-pin connector * Replaces existing handles 78.00 AT339786 Control (with Joystick Controls) (300 Series) 4-pin connector and 3-pin connector included 245.00 AT427985 Control Kit For E series (models 38, 39, 320, 323, and 326) with manual control with Foot Controls (0900) or Hand Controls (0925) OR with EH controls (0950, 0975, 0980, and 0990).Includes 3-pin and 4-pin connector. Replaces existing handles. 728.00 T227282 Restrictor Elbow - 0.065 in. For enhanced dozer blade tilt cylinder control See Parts 0 September 208
DB96 DOZER BLADE Overall width: 96.0 in. (2438 mm) Length: 3.5 in. (800 mm) Blade height: 24.0 in. (60 mm) Blade width (full angle): 84.7 in. (25 mm) Cutting edge (reversible): 0.625 x 6 in. (6 x 53 mm) Degrees of angle: 30, right or left Degrees of tilt: 0, up or down Adjustable skid shoe: Standard Comes Standard with 3 Pin Wire Harness Select One From Each Required Category F.O.B. Dubuque, Iowa 9790T DB96 DOZER BLADE 328E-332E SS 330G-332G SS 329E-333E CTLs 33G-333G CTLs 6,629.00 AT428072 hydraulic quick coupler adapter kit is available to adapt all HIGH FLOW E series SSL and CTL machines to standard flow attachment couplers. KV2995 2 Volt Demonstration Kit 3-pin connector 34.00 KV25224 2 Volt Receptacle Kit (with Traditional Controls) (300 Series) 3-pin connector 77.00 AT33690 4 Pin Wire Harness Adapter (300 Series) For use when equipped with an Control (with Traditional Controls), AT320590 For use when equipped with an Eight Button Control Handle, AT320590 See Parts AT427986 Control For E series (models 328, 329, 332, and 333) with EH controls (0950, 0975, 0980, and 0990). Includes 3-pin and 4-pin connector. Replaces existing handles. 45.00 AT394637 Control (with E-H Joystick Controls without Joystick Buttons) D Series (S/N 98376 and above) For use with E-H Controls without Joystick Buttons For use with E-H Joystick Controls (0950) Includes 3-pin and 4-pin connector Replaces existing handles 460.00 AT348477 Control (with E-H Joystick Controls) D Series (S/N 98376 and above) For use with E-H Joystick Controls (0950) Includes 3-pin and 4-pin connector 260.00 0 September 208