PM2 DUAL RM TREE STRAP CATALOG NUMBER: LAMP(S): NOTES: CATALOG NUMBER LOGIC PM2DRM Example PM2DRM - TS-20 - D15/D15 - BZP - MT - SC Series PM2DRM - Universal Power Module 2 Dual Remote Mounting TS - Length - Tree Strap (Specify Adjustable Strap Length) Minimum 3 Adjustable Strap (Standard) Driver Type (2 driver choices requred with PM2DRM) D15-15W Driver (non-dimming) D15INC - 15W Dimming Driver (for use with Incandescent Dimmer)* REMOTE WIRING LED Driver Remote driver installations require inter-connected wiring between the LED and driver (by others). Drivers have specific wiring requirements between these components. Driver manufacturers regularly recommend the following wiring details for such installations: Do not exceed 50 foot overall wiring distance using 12 gauge copper wire. Failure to comply with specific wiring requirements will void product warranty. D25-25W Driver (non-dimming) D25INC - 25W Dimming Driver (for use with Incandescent Dimmer)* Standard Premium Powder Coat Color Satin Wrinkle Bronze BZP BZW Black BLP BLW White (Gloss) WHP WHW Aluminum SAP ABP Antique Brass Powder CMG Cascade Mountain Granite RMG Rocky Mountain Granite AMG Aleutian Mountain Granite CRI Cracked Ice SDS Sonoran Desert Sandstone AQW Antique White CRM Cream SMG Sierra Mountain Granite BCM Black Chrome HUG Hunter Green TXF Textured Forest BGE Beige MDS Mojave Desert Sandstone WCP Weathered Copper Input Voltage Options Verde VER 120-120 VAC Input (for use with D15INC and D25INC only) MT - 120-277 VAC Input BPP Brown Patina Powder NBP Natural Brass Powder WIR Weathered Iron CAP Clear Anodized Powder OCP Old Copper SC - Safety Cable. For use with Tree Strap (TS) mount. Cable length to match strap length. MB - Mounting Brackets Also available in RAL es See submittal SUB-1439-00 DRIVER ELECTRICAL DATA TYPE AC INPUT RANGE Frequency Hz DIMMING POWER FACTOR THD OPER. AMBIENT TEMPERATURE DIMMER TYPE DIMMER RANGE D15 120/208/240/277 50/60 NO >0.92 20% -30 C ~ 50 C D15INC 120 50/60 YES >0.96 20% -30 C ~ 60 C Incandescent 10-100% D25 120/208/240/277 50/60 NO >0.92 20% -30 C ~ 50 C D25INC 120 50/60 YES >0.96 20% -30 C ~ 60 C Incandescent 10-100% SUB000800.5 THIS DOCUMENT CONTAINS PROPRIETARY INFORMATION OF, INC. AND ITS RECEIPT OR POSSESSION DOES NOT CONVEY ANY RIGHTS TO REPRODUCE, DISCLOSE ITS CONTENTS, OR TO MANUFACTURE, USE OR SELL ANYTHING IT MAY DESCRIBE. REPRODUCTION, DISCLOSURE OR USE WITHOUT SPECIFIC WRITTEN AUTHORIZATION OF, INC. IS STRICTLY FORBIDDEN.
PM2 DUAL RM TREE STRAP FRONT VIEW SIDE VIEW Adjustable Nylon Strap 2" 12 1/2" 6 1/4" END VIEW 6 13/16" 3 3/8" Specify Length 3" Minimum (4) 1/2" Knockouts For Use with Surface Conduit (By Others) 2 1/4" SAFETY CABLE Safely Cable with Optional Secure Connection, No Tools Required for Assembly SPECIFICATIONS GreenSource Initiative Metal and packaging components are made from recycled materials. Manufactured using renewable solar energy, produced onsite. Returnable to manufacturer at end of life to ensure cradleto-cradle handling. Packaging contains no chlorofluorocarbons (CFC s). Use of this product may qualify for GreenSource efficacy and recycling rebate(s). Consult www.bklighting.com/greensource for program requirements. Tree Installation Tree Strap mounting system facilitates non-invasive installation. Adjustable nylon strap is mold and mildew resistant and will not hinder tree growth. Optional stainless steel safety cable maintains UPM mounting when nylon strap is disengaged. Housing Copper free, aluminum extrusion with die cast end caps. Surface mounted with flow through back channel to prevent water and debris collection. Machined aluminum cover with countersunk holes for flush hardware installation. Tamper-resistant, UPM s Patented knockouts are covered by U.S. Patent No. 6,940,012 B2 captive, black oxide stainless steel mounting screws. Front access for ease of installation and inspection. [2] 1/2 NPT female conduit entries per end cap for through wiring. Installation Tether Stainless steel cable with integral loop allows cover to temporarily suspend from housing during installation to simplify wire connection and component attachment. Patented Knockouts [4] 1/2 NPT, machined aluminum knockouts. High temperature, silicone O Ring for water-tight seal. Patented design allows knockout to be reinserted without compromising seal integrity. Driver [2] 700mA, Class A, constant current drivers. 120-277VAC (nominal) primary input voltage. 50/60Hz. >0.90 Power Factor, <15.0A in-rush current, 20%THD (nominal at 120VAC full load). Output over-voltage, over-current, and short circuit protection with auto recovery. EMC: FCC47CFR Part 15 Class B compliant. Dimming driver for use with standard incandescent dimmers. 10-100% range. StarGuard, our exclusive RoHs compliant, 15 stage chromate-free process cleans and conversion coats aluminum components prior to application of Class A TGIC polyester powder coating. Warranty 5 year limited warranty. Listings NEMA 4X / IP-66 Rated Enclosure. ETL Listed to ANSI/UL Standard 50/50E and Certified to CAN/CSA Standard C22.2 No. 94.1/94.2. RoHs compliant. Made in USA. SUB000800.5
PM2 DUAL RM SURFACE MOUNT CATALOG NUMBER: LAMP(S): NOTES: CATALOG NUMBER LOGIC PM2DRM SM Example PM2DRM - SM - D25/D25 - BZP - MT Series PM2DRM - Universal Power Module 2 Dual Remote Mounting SM - Surface Mount (requires side conduit entry) Driver Type (2 driver choices requred with PM2DRM) D15-15W Driver (non-dimming) D15INC - 15W Dimming Driver (for use with Incandescent Dimmer)* REMOTE WIRING LED Driver Remote driver installations require inter-connected wiring between the LED and driver (by others). Drivers have specific wiring requirements between these components. Driver manufacturers regularly recommend the following wiring details for such installations: Do not exceed 50 foot overall wiring distance using 12 gauge copper wire. Failure to comply with specific wiring requirements will void product warranty. D25-25W Driver (non-dimming) D25INC - 25W Dimming Driver (for use with Incandescent Dimmer)* Standard Premium Powder Coat Color Satin Wrinkle Bronze BZP BZW Black BLP BLW White (Gloss) WHP WHW Aluminum SAP ABP Antique Brass Powder CMG Cascade Mountain Granite RMG Rocky Mountain Granite AMG Aleutian Mountain Granite CRI Cracked Ice SDS Sonoran Desert Sandstone AQW Antique White CRM Cream SMG Sierra Mountain Granite BCM Black Chrome HUG Hunter Green TXF Textured Forest BGE Beige MDS Mojave Desert Sandstone WCP Weathered Copper Input Voltage Verde VER 120-120 VAC Input (for use with D15INC and D25INC only) MT - 120-277 VAC Input BPP Brown Patina Powder NBP Natural Brass Powder WIR Weathered Iron CAP Clear Anodized Powder OCP Old Copper Also available in RAL es See submittal SUB-1439-00 DRIVER ELECTRICAL DATA TYPE AC INPUT RANGE Frequency Hz DIMMING POWER FACTOR THD OPER. AMBIENT TEMPERATURE DIMMER TYPE DIMMER RANGE D15 120/208/240/277 50/60 NO >0.92 20% -30 C ~ 50 C D15INC 120 50/60 YES >0.96 20% -30 C ~ 60 C Incandescent 10-100% D25 120/208/240/277 50/60 NO >0.92 20% -30 C ~ 50 C D25INC 120 50/60 YES >0.96 20% -30 C ~ 60 C Incandescent 10-100% SUB000800.6 THIS DOCUMENT CONTAINS PROPRIETARY INFORMATION OF, INC. AND ITS RECEIPT OR POSSESSION DOES NOT CONVEY ANY RIGHTS TO REPRODUCE, DISCLOSE ITS CONTENTS, OR TO MANUFACTURE, USE OR SELL ANYTHING IT MAY DESCRIBE. REPRODUCTION, DISCLOSURE OR USE WITHOUT SPECIFIC WRITTEN AUTHORIZATION OF, INC. IS STRICTLY FORBIDDEN.
PM2 DUAL RM SURFACE MOUNT TOP VIEW SIDE VIEW 2 1/4" 1 3/4" (4) Clearance Holes for 1/4" Fasteners (by others) 13 3/8" 13 7/8 12 1/2" 6 1/4" 3 3/8" END VIEW 2 3/8" With Supplied Mounting Bracket (4) 1/2" Knockouts For Use with Surface Conduit (By Others) SPECIFICATIONS GreenSource Initiative Metal and packaging components are made from recycled materials. Manufactured using renewable solar energy, produced onsite. Returnable to manufacturer at end of life to ensure cradleto-cradle handling. Packaging contains no chlorofluorocarbons (CFC s). Use of this product may qualify for GreenSource efficacy and recycling rebate(s). Consult www.bklighting.com/greensource for program requirements. Surface Mount For use with side entry, surface conduits. Stainless steel mounting brackets provide for direct anchor to architectural surfaces in any orientation. Housing Copper free, aluminum extrusion with die cast end caps. Surface mounted with flow through back channel to prevent water and debris collection. Machined aluminum cover with countersunk holes for flush hardware installation. Tamper-resistant, captive, black oxide stainless steel mounting screws. Front access for ease of installation and inspection. [2] 1/2 NPT female conduit entries per end cap for through wiring. UPM s Patented knockouts are covered by U.S. Patent No. 6,940,012 B2 Installation Tether Stainless steel cable with integral loop allows cover to temporarily suspend from housing during installation to simplify wire connection and component attachment. Patented Knockouts [4] 1/2 NPT, machined aluminum knockouts. High temperature, silicone O Ring for water-tight seal. Patented design allows knockout to be reinserted without compromising seal integrity. Driver [2] 700mA, Class A, constant current drivers. 120-277VAC (nominal) primary input voltage. 50/60Hz. >0.90 Power Factor, <15.0A in-rush current, 20%THD (nominal at 120VAC full load). Output over-voltage, over-current, and short circuit protection with auto recovery. EMC: FCC47CFR Part 15 Class B compliant. Dimming driver for use with standard incandescent dimmers. 10-100% range. StarGuard, our exclusive RoHs compliant, 15 stage chromate-free process cleans and conversion coats aluminum components prior to application of Class A TGIC polyester powder coating. Warranty 5 year limited warranty. Listings NEMA 4X / IP-66 Rated Enclosure. ETL Listed to ANSI/UL Standard 50/50E and Certified to CAN/CSA Standard C22.2 No. 94.1/94.2. RoHs compliant. Made in USA. SUB000800.6
PM2 DUAL RM JUNCTION BOX (CAMLOCK ) CATALOG NUMBER: LAMP(S): NOTES: CATALOG NUMBER LOGIC PM2DRM Example PM2DRM - CT - D25/D25 - BZP - MT - Series PM2DRM - Universal Power Module 2 Dual Remote Mounting CT - Rectangular CamLock CR - Round CamLock Driver Type (2 driver choices requred with PM2DRM) D15-15W Driver (non-dimming) D15INC - 15W Dimming Driver (for use with Incandescent Dimmer)* REMOTE WIRING LED Driver Remote driver installations require inter-connected wiring between the LED and driver (by others). Drivers have specific wiring requirements between these components. Driver manufacturers regularly recommend the following wiring details for such installations: Do not exceed 50 foot overall wiring distance using 12 gauge copper wire. Failure to comply with specific wiring requirements will void product warranty. D25-25W Driver (non-dimming) D25INC - 25W Dimming Driver (for use with Incandescent Dimmer)* Standard Premium Powder Coat Color Satin Wrinkle Bronze BZP BZW Black BLP BLW White (Gloss) WHP WHW Aluminum SAP ABP Antique Brass Powder CMG Cascade Mountain Granite RMG Rocky Mountain Granite AMG Aleutian Mountain Granite CRI Cracked Ice SDS Sonoran Desert Sandstone AQW Antique White CRM Cream SMG Sierra Mountain Granite BCM Black Chrome HUG Hunter Green TXF Textured Forest BGE Beige MDS Mojave Desert Sandstone WCP Weathered Copper Input Voltage Options Verde VER 120-120 VAC Input (for use with D15INC and D25INC only) MT - 120-277 VAC Input MB - Mounting Brackets BPP Brown Patina Powder NBP Natural Brass Powder WIR Weathered Iron CAP Clear Anodized Powder OCP Old Copper Also available in RAL es See submittal SUB-1439-00 DRIVER ELECTRICAL DATA TYPE AC INPUT RANGE Frequency Hz DIMMING POWER FACTOR THD OPER. AMBIENT TEMPERATURE DIMMER TYPE DIMMER RANGE D15 120/208/240/277 50/60 NO >0.92 20% -30 C ~ 50 C D15INC 120 50/60 YES >0.96 20% -30 C ~ 60 C Incandescent 10-100% D25 120/208/240/277 50/60 NO >0.92 20% -30 C ~ 50 C D25INC 120 50/60 YES >0.96 20% -30 C ~ 60 C Incandescent 10-100% SUB000800.7 THIS DOCUMENT CONTAINS PROPRIETARY INFORMATION OF, INC. AND ITS RECEIPT OR POSSESSION DOES NOT CONVEY ANY RIGHTS TO REPRODUCE, DISCLOSE ITS CONTENTS, OR TO MANUFACTURE, USE OR SELL ANYTHING IT MAY DESCRIBE. REPRODUCTION, DISCLOSURE OR USE WITHOUT SPECIFIC WRITTEN AUTHORIZATION OF, INC. IS STRICTLY FORBIDDEN.
PM2 DUAL RM JUNCTION BOX (CAMLOCK ) TOP VIEW SIDE VIEW 12 1/2" 6 1/4" 3 3/8" END VIEW Round CamLock Canopy 3/8" 3 1/2" RECTANGULAR CamLock Canopy 1/8" 3" 2 1/2" With Supplied Mounting Plate (4) 1/2" Knockouts For Use with Surface Conduit (By Others) 3 1/4" 5" 5" Dia. SPECIFICATIONS GreenSource Initiative Metal and packaging components are made from recycled materials. Manufactured using renewable solar energy, produced onsite. Returnable to manufacturer at end of life to ensure cradleto-cradle handling. Packaging contains no chlorofluorocarbons (CFC s). Use of this product may qualify for GreenSource efficacy and recycling rebate(s). Consult www.bklighting.com/greensource for program requirements. Round CamLock Canopy (Recessed Junction Box) 5 diameter, machined aluminum construction. Includes stainless steel universal mounting ring for use with 4 octagonal junction box. [2] tamper-resistant, black oxide stainless steel mounting screws. 1/8 thick HT- 805A silicone foam gasket for water-tight seal. Integral CamLock provides additional 30 adjustment for precision alignment of UPM regardless of junction box orientation. Integral wiper seal maintains water-tight integrity between UPM and junction box. Optional stainless steel mounting brackets may be specified to provide additional anchor to architectural surface. Rectangular CamLock Canopy (Recessed Junction Box) Machined aluminum, 3 x 5 rectangular canopy for use with single gang junction box. [2] tamper resistant, black oxide stainless steel mounting screws. 1/8 thick HT- 805A silicone foam gasket for water-tight seal. Integral UPM s Patented knockouts are covered by U.S. Patent No. 6,940,012 B2 CamLock provides additional 30 adjustment for precision alignment of UPM regardless of junction box orientation. Integral wiper seal maintains water-tight integrity between UPM and junction box. Optional stainless steel mounting brackets may be specified to provide additional anchor to architectural surface. Housing Copper free, aluminum extrusion with die cast end caps. Surface mounted with flow through back channel to prevent water and debris collection. Machined aluminum cover with countersunk holes for flush hardware installation. Tamper-resistant, captive, black oxide stainless steel mounting screws. Front access for ease of installation and inspection. [2] 1/2 NPT female conduit entries per end cap for through wiring. Installation Tether Stainless steel cable with integral loop allows cover to temporarily suspend from housing during installation to simplify wire connection and component attachment. Patented Knockouts [4] 1/2 NPT, machined aluminum knockouts. High temperature, silicone O Ring for water-tight seal. Patented design allows knockout to be reinserted without compromising seal integrity. Driver [2] 700mA, Class A, constant current drivers. 120-277VAC (nominal) primary input voltage. 50/60Hz. >0.90 Power Factor, <15.0A in-rush current, 20%THD (nominal at 120VAC full load). Output over-voltage, over-current, and short circuit protection with auto recovery. EMC: FCC47CFR Part 15 Class B compliant. Dimming driver for use with standard incandescent dimmers. 10-100% range. StarGuard, our exclusive RoHs compliant, 15 stage chromate-free process cleans and conversion coats aluminum components prior to application of Class A TGIC polyester powder coating. Warranty 5 year limited warranty. Listings NEMA 4X / IP-66 Rated Enclosure. ETL Listed to ANSI/UL Standard 50/50E and Certified to CAN/CSA Standard C22.2 No. 94.1/94.2. RoHs compliant. Made in USA. SUB000800.7