SBI INFRA MANAGEMENT SOLUTIONS PVT.LTD. CIRCLE OFFICE, THIRD FLOOR, STATE BANK OF INDIA, SYNERGY BUILDING, C-6, G- BLOCK, BANDRA KURLA COMPLEX, BANDRA EAST, MUMBAI-400051 PART B: FINANCIAL BID TENDER FOR: Proposed Electrical Work For SBI Ramdaspeth Branch, Nagpur. ARCHITECT S. NANDEDKAR & ASSOCIATES 103, UTKARSH UMANAG APPARTMENT, NR. MOUNT CARMEL SCHOOL, AJNI SQUARE, NAGPUR (M.S.) 440015 TELEPHONE: - 0712-2252945. FAX: - 2251921 E-mail:- officesna@gmail.com NAME OF CONTRACTING FIRM-
Abstract PART 1 PROPOSED ELECTRICAL WORK Amount in Rupees In Words Rs. FOR OFFICE USE ONLY Signature & Seal of the Tenderer 2
LIST OF APPROVED MATERIALS: FOR ELECTRICAL WORK NOTE: 1. No deviation permissible. 2. Wherever Contractor proposes to use equivalent makes (i.e. other than specified) the same shall be done only after prior approval from Architect. Any additional expenditure time due to this will be on Contractors account and no claims will be entertained. 3. All materials to be used shall be of first quality unless otherwise specified and as prescribed in Banks Standard Manual. 4. Contractor shall produce proof of purchase and use of the approved material as prescribed by the Architect, from the company/ manufacturer at the time of presenting running bill and the final bill. S.No. ITEM MAKE 1. Wires Poly Cab, RR,KEI or as directed by Bank s Engg./ Architect 2. Cables Polycab, KEI or as directed by Bank s Engg./ Architect 3. 6A switches & Sockets MK India / Crabtree / North west,anchor ROMA or as directed by Bank s Engg./ Architect 4. Ceiling Roses, Holders, Buzzers, Bell Push, Bell MK India / Crabtree / North west,anchor ROMA or as directed by Bank s Engg./ Architect 5. MCB s & accessories Legrade, Siemens or as directed by Bank s Engg./ Architect 6. MCCB Legrade, L&T or as directed by Bank s Engg./ Architect 7. Electrical fittings Philips / Wipro/ Havells, or as directed by Bank s Engg /Architect. 8. Fans Almonard, Crompton- (High speed models) or as directed by Bank s Engg /Architect 9. HRC switch fuse unit E.E., L&T, siemens 10. Bus- bar chamber Standard, L& T 11. Cable glands & Lugs Siemens, Dowels 12. 15 A switch socket MK India / Crabtree / North west,anchor ROMA or as directed by Bank s Engg./ Architect 3
13. 16 A DP switches with Fuse MK India / Crabtree / North west,anchor ROMA or as directed by Bank s Engg./ Architect 14. Telephone Wires Poly Cab or as directed by Bank s Engg /Architect 15. Fluorescent tubes, bulbs Philips / Wipro/ Crompton, or as directed by Architect. 16. Electronic regulators MK India / Crabtree / North west,anchor ROMA or as directed by Bank s Engg./ Architect 17. PVC conduits Precision, Diamond 18. Casing capping & Accessories Precision, Modi 19. G.I. B class pipe Prakash, Surya TENDER NAME OF CLIENT: - STATE BANK OF INDIA ADDRESS: - RAMDASPETH BRANCH, STATE BANK OF INDIA, NAGPUR ZONE, MAHARASHTRA. NATURE OF WORK: - ELECTRICAL WORK SR. NO. DESCRIPTION QUANTITY RATE AMOUNT 1 2 3 4 5 A POINT WIRING Unit Point wiring in PVC heavy quality (HMS) PVC electrical conduit concealed in walls, RCC slabs, RCC columns complete with necessary conduit fittings and accessories directly A-1 concealed in walls, columns etc.(conduit to be laid in columns, beams, slabs before concreting and in walls before or after the walls are raised as required by structural restraints) 4
i) Wiring with single PVC FRLS insulated stranded copper wires as current carrying conductors of specified sizes. ii) Single PVC FRLS insulated stranded copper Internal earth conductor size 1.5 sq. mm. For light, fan, etc. iii) Single PVC FRLS insulated stranded copper Internal earth conductor size 1.5 sq. mm. For switchboard, 6 Amp plug socket points, 2.5 Sq. mm for power (16 A) plug points and 4 Sq. mm for AC plug points. iv) Modular Switch, Sockets, Bell Push of approved make and quality as required at suitable height. v) Modular type GI switch box (For Suitable modules) of Legrand, Schneider, ABB make with flush PVC cover plate & frame on top, properly chased for fixing Piano switch/socket & also for LAN & Tel. vi) Including making good the surface of wall / ceiling / floor to as it is condition. A-1.1 A-1.2 A-1.3 Point wiring for light / fan / bell concealed type in min 20 mm PVC conduit with 1.5 sq.mm. FRLS grade copper wires with moduler type switch and required accessaries as per specification. Point wiring all as above for additional light point of a group controlled by the same 6 Amp single pole switch complete with 1.5 Sq. mm single PVC insulated stranded copper wires. Same as per item No.A-1.1 above but for 1 Nos 6A switch and 6A 2/3 Pin socket on light and fan switchboard. 113 Point 89 Point 19 Point 5
A-1.4 A- 1.5 A- 1.6 A- 1.7 A- 1.8 Providing, Fixing & Terminating 2 x 1.5 + 1 x 1.5 sq. mm. copper wire in 20 mm PVC conduit as primary circuit for Light/Fan Switchboard as per specification No: WG- MA/PC, para no. 1.4.1 (Rate of Switchboard already included in point wiring) Providing, Fixing & Terminating 2 x 2.5 + 1 x 1.5 sq. mm. copper wire in 20 mm PVC conduit as primary circuit for Light/Fan Switchboard as per specification No: WG- MA/PC, para no. 1.4.1 (Rate of Switchboard already included in point wiring) Providing, Fixing & Terminating loop circuit of 2 x 1.5 + 1 x 1.5 sq. mm.copper wire in 20 mm PVC conduit for Light/Fan Switchboard as per specification No: WG-MA/PC, para no. 1.4.1 (Rate of Switchboard already included in point wiring) Providing, Fixing & Terminating 1 No 6A switch and 6A 2/3 Pin socket on independent switch board with PVC surface modular switch box with double mounting plate for 3 module with 2 x 2.5 + 1 x 1.5 sq. mm.copper wire in 20 mm PVC conduit as per specification No: WG-MA/PC, para no. 1.4.1 Providing & Fixing 1 No 6A switch and 6A 2/3 Pin socket socket on independent switch board with PVC surface modular switch box with double mounting plate for 3 module. (Circuit wiring already included in other items. A-1.7, etc.). Item includes loop circuit of 2 x 1.5 + 1 x 1.5 sq. mm. copper wire from nearby computer station or switchboard or power board. 17 Nos. 3 Nos. 46 Nos. 6 Nos. 3 Nos. 6
A- 1.9 A- 1.10 A- 1.11 A- 1.12 Providing, Fixing & Terminating 2 Nos of 6A switch and 2 Nos 6A 2/3 Pin or Universal socket on independent switch board with PVC surface modular switch box with double mounting plate for 6 module with 2 x 4 + 1 x 2.5 sq. mm.copper wire in 20 mm PVC conduit as per specification No: WG-MA/PC, para no. 1.4.1 Providing & Fixing 2 Nos of 6A switch and 2 Nos 6A 2/3 Pin or Universal socket on independent switch board with PVC surface modular switch box with double mounting plate for 6 module. (Circuit already included in item A-1.9). Item includes loop circuit of 2 x 2.5 + 1 x 1.5 sq. mm. copper wire from nearby computer station or switchboard or power board. Providing, Fixing & Terminating 2 Nos of 6A switch and 2 Nos 6A 2/3 Pin or Universal socket on independent switch board with PVC surface modular switch box with double mounting plate for 6 module with 2 x 2.5 + 1 x 1.5 sq. mm.copper wire in 20 mm PVC conduit as per specification No: WG-MA/PC, para no. 1.4.1 (for First Floor) Providing & Fixing 2 Nos of 6A switch and 2 Nos 6A 2/3 Pin or Universal socket on independent switch board with PVC surface modular switch box with double mounting plate for 6 module. (Circuit already included in item A-1.11). Item includes loop circuit of 2 x 1.5 + 1 x 1.5 sq. mm. copper wire from nearby computer station or switchboard or power board. (for First Floor) 3 Nos. 4 Nos. 2 Nos. 4 Nos. 7
A- 1.13 A- 1.14 A- 1.15 Providing, Fixing & Terminating Computer Station having 3 Nos of 6A switch and 4 Nos 6A 2/3 Pin or universal socket on independent switch board with PVC surface modular switch box with double mounting plate for 12 module with raw power circuit of 2 x 2.5 + 1 x 1.5 sq. mm. copper wire in separate 20 mm PVC conduit and UPS power circuit of 2 x 4 + 1 x 2.5 sq. mm.copper wire in separate 20 mm PVC conduit as per specification No: WG- MA/PC, para no. 1.4.1 Providing & Fixing Computer Station having 3 Nos of 6A switch and 4 Nos 6A 2/3 Pin or universal socket on independent switch board with PVC surface modular switch box with double mounting plate for 12 module. Item includes raw power loop circuit of 2 x 1.5 + 1 x 1.5 sq. mm. in separate 20 mm PVC conduit and UPS power loop circuit of 2 x 2.5 + 1 x 1.5 sq. mm. copper wire in separate 20 mm PVC conduit from nearby computer station. Providing, Fixing & Terminating Computer Station having 3 Nos of 6A switch and 4 Nos 6A 2/3 Pin or universal socket on independent switch board with PVC surface modular switch box with double mounting plate for 12 module with raw power circuit of 2 x 2.5 + 1 x 1.5 sq. mm. copper wire in separate 20 mm PVC conduit and UPS power circuit of 2 x 2.5 + 1 x 1.5 sq. mm.copper wire in separate 20 mm PVC conduit as per specification No: WG- MA/PC, para no. 1.4.1 9 Nos. 24 Nos. 4 Nos. 8
A- 1.16 A- 1.17 A- 1.18 A- 1.19 Providing & Fixing Computer Station having 3 Nos of 6A switch and 4 Nos 6A 2/3 Pin or universal socket on independent switch board with PVC surface modular switch box with double mounting plate for 12 module. Item includes raw power loop circuit of 2 x 1.5 + 1 x 1.5 sq. mm. in separate 20 mm PVC conduit and UPS power loop circuit of 2 x 1.5 + 1 x 1.5 sq. mm. copper wire in separate 20 mm PVC conduit from nearby computer station. Providing, Fixing & Terminating 1 No. 16 A switch and 16 A universal socket on independent switch board with PVC surface modular switch box with double mounting plate for 3 module with 2 x 4 + 1 x 4 sq. mm. copper wire in 20 mm PVC conduit as per specification No: WG-MA/PC, para no. 1.4.1 Providing, Fixing & Terminating 2 Nos. 16 A switch and 16A universal socket on independent switch board with PVC surface modular switch box with double mounting plate for 6 module with 2 x 4 + 1 x 4 sq. mm. copper wire in 20 mm PVC conduit as per specification No: WG-MA/PC, para no. 1.4.1 Providing & Fixing 2 Nos of 16A switch and 2 Nos 16A 2/3 Pin or Universal socket on independent switch board with PVC surface modular switch box with double mounting plate for 6 module. (Circuit already included in item A-1.18). Item includes loop circuit of 2 x 2.5 + 1 x 1.5 sq. mm. copper wire from nearby computer station or switchboard or power board. 3 Nos. 1 Nos. 6 Nos. 3 Nos. SECTION - A - Total Amt. 9
B B-1 B-2 B-3 B-4 B-5 CABIN FANS & EXHAUST FANS & LIGHT FITTING Supplying and erecting Five Star Rated Energy Saving Ceiling Fan 230 V A.C. 50 cycles 1200 mm complete and erected in position with fixing fan hook and all accessories as per specifcation no. FG-FN/CF a) 1200 mm 28 Nos. b) 900 mm 32 Nos. c) 600 mm 6 Nos. Point wiring for fan concealed type in min 20 mm PVC conduit with 1.5 sq.mm. FRLS grade copper wires with modular type switch, 2 module electronic type step regulator and 66 Nos required accessaries as per specification for ceiling fan 1200/900/600 mm sweep, complete erected on provided switchboard. Supply, Erecting, testing and commissioning of exhaust fans in following sizes (heavy duty exhaust fans with ball/ bush bearings 230 V/ 250 V A.C. one phase, 50 Hz with condenser and without regulator complete with necessary materials and 3 core PVC insulated and sheathed 1.5 Sq. mm flexible copper wire of adequate length and 3 Pin 5 Amp plug top. a) 12" ( 375 mm) 900 RPM 6 Nos. Supplying & erecting 18W, 230V integral type LED Lamp suitable for B-22/E-27 base. (High 8 Nos. Efficiency LED base price 800rs) Supplying & erecting T8 LED 20W tube light fitting (4 feet) with aluminum housing, heat sink, integrated HF electronic driver 52 Nos. complete(including lamp). 10
B-6 B-7 Supply & erecting LED square Slim Panel type LM24-391-XXX-57-DD- 31W LED Wave LED - Recessed of Wipro make or equivalent with head frame required for mounting on Gypsum or Grid ceiling. Supply & erecting LED round downlighter type LD71-161-SML-65-RF 15W LED Iris Gold RF - Recessed of Wipro make or equivalent 35 Nos. 100 Nos. C C-1.1 C-1.2 C-1.3 C-1.4 SECTION - B - Total Amt. MCB DBs, MCCBs and MCBs & Mains Circuit Supply & Erection of IP 55 Plug and socket DB with 20A C class SP MCB for AC 1 Ton or 1.5 Ton (Single phase) as per specification.(legrand Cat No-607841) with 2 x 4 + 1 x 2.5 sq. mm.copper wire in 20 mm PVC conduit as per specification No: WG- MA/PC, para no. 1.4.1 Supply & Erection of IP 55 Plug and socket DB with 32A C class SP MCB for AC 2 Ton (Single phase) as per specification.(legrand Cat No- 607841 with 32A MCB) with 2 x 6 + 1 x 4 sq. mm. copper wire in 20 mm PVC conduit as per specification No: WG-MA/PC, para no. 1.4.1 Supply & Erection of Plug and Socket DB with 20/25A C class TP MCB for AC 3 Ton or 4 Ton (Three phase) as per specification.(legrand Cat No-056633) as per specification No: WG- MA/PC, para no. 1.4.1 Supply & Erection of 4 pole enclosure suitable for & including 32A C class TPN MCB and mounted on wall, for UPS 1 & UPS 2 Incomer as per specification.(legrand Cat No-607710) 12 Nos 6 Nos 5 Nos 2 Nos 11
C-1.5 C-1.6 C-2 Supply & Erection of 24 Hrs Modular Time Switch including DIN Rail Adaptor, Terminal cover & IP 53 Box and mounted on wall, including termination of circuit cables as per specification and consultant's / architect's instructions. (Legrand Cat No-049986) Supply & Erection of 3 Pole 32 A Power Contractor (industrial duty) with integrated auxiliary contacts 2 NO + 2 NC, 230V control voltage including DIN Rail Adaptor, necessary wiring & IP 53 Box and mounted on wall, including termination of circuit cables as per specification and consultant's / architect's instructions. (Legrand Cat No-416126) Supplying and erecting Main Panel in IP-43 construction and as per SLD. Panel shall be Floor / Wall mounting, MCCB Panel board suitable for Four Pole Incoming 250A, Four Pole MCCB Outgoing on provided iron frame, made from 2 mm thick CRCA sheet duly powder coated as per Specification No SW- SWR/MCCB PB. Panel shall include the following:- i) One no. 4 Pole MCCB of 200A, 415V capacity with S.C. Rating 36/40 ka (Ics=100% of Icu) thermal and magnetic setting (adjustable short circuit 3.5-10 In & adjustable overload 64% - 100%) as MSEB incomer, ii) Five nos. 4 Pole MCCB of 100A, 415V capacity with S.C. rating 25 ka (Ics=100% of Icu) thermal and magnetic setting (adjustable short circuit and adjustable overload) as outgoing for Power DB - 1 & 2, APFC Panel, Lighting & UPS DB & Spare. iii) Prewired meter module suitable for MCCB Incomer 1 with CT's, Ammeter and Voltmeter. 3 Nos 3 Nos 1 Nos 12
iv) Min. 350 mm wide cable alleys with sufficient space for termination and 300 A full rated Aluminium Busbar. v) LED type indicating pilot lamp with LED colours Red / Yellow / Green, 230 / 250V with necessary material, wiring & connections etc. C-3 Supplying & erecting triple pole and neutral distribution board (TPNDB) with door surface/ flush mounted SP / TP MCBs 18 Poles on iron/ G.I. frame/wooden board (Vertical Busbar type) as per specification No. SW-SWR/MCBDB as Lighting & UPS DB. (Legrand Cat No- 607695) With Incomer - 1 No. TPN 100A MCCB, 18kA, overload adjustable, short circuit fixed. Outgoing - a) 5 No. TP 32A MCB, 10kA C- series. b) 1 No. TP 63A MCB, 10kA C- series Spare. 1 Nos. 13
C-4 C-5 C-5.1 Supplying and erecting 30 kvar, Three phase, 50 cycles, Capacitor Duty Contactor with delatching mechanism Micro processor APFC controller with MPP /APP type capacitor with 525 V and having minimum overcurrent capacity of 1.8 In, peak inrush current capacity 300 In and minimum life 150000 hours with, consisting of suitable steps of MPP /APPtype capacitor units confirming to Latest IEC with detuned aluminium filter 7% reactors with cicruit breaker as main incomer and MCCB for each branch protection as per specification no ESD-APFC. Capacitor rating / output will be 30 kvar at 525V. Supplying, erecting by chasing in wall & concealing with front face flush with wall surface complete with double/ single earth connection TP and N / SPN MCB DBs. Similar to ETPN / VTPN of Legrand in IP-43 construction suitable for mounting ELCB / MCB / RCCB / RCBO as per SLD Supplying & erecting triple pole and neutral distribution board (TPNDB) with door surface/ flush mounted SP / TP MCBs 24 Poles on iron/ G.I. frame/wooden board (Vertical Busbar type) as per specification No. SW-SWR/MCBDB as Power DB-1 (Legrand Cat No-607717) With Incomer - 1 No. 4P 100A RCCB, 300mA. Outgoing - a) 3 No. TP 20A MCB, 10kA C- series. b) 2 No. TP 25A MCB, 10kA C- series. c) 3 No. SP 32A MCB, 10kA C- series. d) 1 No. SP 16A MCB, 10kA C- series. e) 5 No. Blanking Plates. 1 Nos 1 Nos. 14
C-5.2 C-5.3 C-5.4 Supplying & erecting triple pole and neutral distribution board (TPNDB) with door surface/ flush mounted SP MCBs 18 Poles on iron/ G.I. frame/wooden board (Horizontal Busbar type) as per specification No. SW-SWR/MCBDB as Power DB-2 (Legrand Cat No-607716) With Incomer - 1 No. 4P 100A RCCB, 300mA. Outgoing - a) 3 No. SP 32A MCB, 10kA C- series. b) 12 No. SP 20A MCB, 10kA C- series. c) 2 No. SP 16A MCB, 10kA C- series. d) 1 No. Blanking Plates. Supplying & erecting triple pole and neutral distribution board (TPNDB) with door surface/ flush mounted SP MCBs 18 Poles on iron/ G.I. frame/wooden board (Horizontal Busbar type) as per specification No. SW-SWR/MCBDB as Lighting DB-1 (Legrand Cat No-607716) With Incomer - 1 No. 4P 25A RCCB, 300mA. Outgoing - a) 1 No. SP 16A MCB, 10kA B- series. b) 9 No. SP 10A MCB, 10kA B- series. c) 2 No. SP 6A MCB, 10kA B- series. d) 6 No. Blanking Plates. Supplying & erecting triple pole and neutral distribution board (TPNDB) with door surface/ flush mounted SP MCBs 18 Poles on iron/ G.I. frame/wooden board (Horizontal Busbar type) as per specification No. SW-SWR/MCBDB as Lighting DB-2 (Legrand Cat No-607716)With Incomer - 1 No. 4P 25A RCCB, 300mA.Outgoing - a) 13 No. SP 10A MCB, 10kA B- series.b) 3 No. SP 6A MCB, 10kA B- series.c) 2 No. Blanking Plates. 1 Nos. 1 Nos. 1 Nos. 15
C-5.5 C-5.6 C-5.7 Supplying and erecting single pole and neutral distribution board (SPNDB) with door surface/flush mounted with 2 ways for incoming and 14 ways for outgoing SP MCB s on iron/ G.I. frame/wooden board as per specification No. SW- SWR/MCBDB. - as UPS DBs-1. (Legrand Cat No-607713) With Incomer - 1 No. DP 40A RCCB, 300mA. Outgoing - a) 6 No. SP 16A MCB, 10kA B- series. b) 2 No. SP 10A MCB, 10kA B- series. c) 3 No. SP 6A MCB, 10kA B- series. d) 3 No. Blanking Plates. Supplying and erecting single pole and neutral distribution board (SPNDB) with door surface/flush mounted with 2 ways for incoming and 16 ways for outgoing SP MCB s on iron/ G.I. frame/wooden board as per specification No. SW- SWR/MCBDB. - as UPS DBs-2. (Legrand Cat No-607724) With Incomer - 1 No. DP 63A RCCB, 300mA. Outgoing - a) 6 No. SP 16A MCB, 10kA B- series. b) 2 No. SP 10A MCB, 10kA B- series. c) 6 No. SP 6A MCB, 10kA B- series. Supplying & erecting triple pole and neutral distribution board (TPNDB) with door surface/ flush mounted SP MCBs 12 Poles on iron/ G.I. frame/wooden board (Horizontal Busbar type) as per specification No. SW-SWR/MCBDB as Lighting & Power DB-FF (Legrand Cat No- 607715)With Incomer - 1 No. 4P 25A RCCB, 300mA.Outgoing - a) 2 No. SP 16A MCB, 10kA B- series.b) 5 No. SP 10A MCB, 10kA B- series.c) 1 No. SP 6A MCB, 10kA B- series.d) 4 No. Blanking Plates. 1 Nos. 1 Nos. 1 Nos. 16
D D - 1 D-1.1 D-2 D-2.1 D-2.2 SECTION -C - Total Amt. MAINS CABLE & WIRES Providing mains complete with following types and size of PVC insulated wires and PVC (HMS) electrical conduit concealed in walls, columns, beams, slabs etc. & restoring the surface to original finish. Supplying & erecting mains with 2x10 sq.mm.and earth wire 6 sq.mm FRLS PVC copper wire, in rigid PVC conduit min. 25mm dia, as per specification No: WG-MA/PC, para no. 1.4.1 Supplying, erecting & terminating XLPE insulated, armoured, multi-core, stranded aluminium conductor, inner sheath extruded, outer PVC sheathed extruded 1100V, grade cables. Main conductor insulation EBXL shall carry 120 deg C, inner and outer sheath will withstand 105 deg C as per IS 1225 & IS 10810. Supplying, erecting & terminating XLPE insulated armoured cable 4 core 4 sq mm copper conductor with continuous 5.48 sq mm (12 SWG) G.I. earth wire complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL Supplying, erecting & terminating XLPE insulated armoured cable 4 core 16 sq mm aluminum conductor with continuous 5.48 sq mm (12 SWG) G.I. earth wire complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL 35 Mtr. 120 Mtr. 130 Mtr. 17
D-2.3 D-2.4 D-2.5 D-2.6 Supplying, erecting & terminating XLPE insulated armoured cable 3.5 core 50 sq mm aluminium conductor with continuous 5.48 sq mm (12 SWG) G.I. earth wire complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL Supplying, erecting & terminating XLPE insulated armoured cable 3.5 core 70 sq mm aluminium conductor with continuous 5.48 sq mm (12 SWG) G.I. earth wire complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL Supplying, erecting & terminating XLPE insulated armoured cable 3.5 core 120 sq mm aluminium conductor with continuous 5.48 sq mm (12 SWG) G.I. earth wire complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL Making cable end terminations including brass double compression gland & crimping type bimetallic / copper lugs for following cable sizes for DG Set AMF Panel. 3.5 core 70 sq mm aluminium armoured cable. 40 Mtr. 25 Mtr. 30 Mtr. 2 Nos. E E-1 SECTION -D - Total Amt. EARTHING/TEL/LAN Providing earthing with Galvanized cast iron earth plate size 60 x 60 x 0.6 cm with funnel with a wire mesh for watering and brick masonry block C.l. cover complete with all materials, testing & recording the results as per specification No. EA-EP. 2 No 18
E-2 Providing earthing with Copper earth plate size 60 x 60 x 0.6 cm with funnel with a wire mesh for watering and brick masonry block C.l. cover complete with all materials, testing 1 No & recording the results as per specification No. EA-EP. E-3 a) 25x4 mm hot dip galvanized Earth Flat. 25 mtr b) G.I. wire for Earthing 8 SWG 40 mtr E-4 Supplying and erecting PVC electrical heavy duty conduit complete with necessary accessories & erection of 25 mm size to act as duct for drawing in telephone /LAN 40 Mtr /firealarm/audio/video/av/data cables or for any other purpose. E-5 Supplying and erecting PVC electrical heavy duty conduit complete with necessary accessories & erection of 20 mm size to act as duct for drawing in telephone /LAN 40 Mtr /firealarm/audio/video/av/data cables or for any other purpose. E-6 Supplying and erecting PVC trunking (PVC casing-n-capping) of size 25 mm with accessories on wall/ceiling as per specification 50 Mtr No: WG-MA/CON, para no. 1.1.2 E-7 Trenching, Supplying & Installation of floor - raceways consisting of 2 Nos of 80 mm x 40 mm x2mm thick rectangular aluminium anodized pipes including chasing and refilling as approved by bank s Engineer/ consultant at site including cutting chases in the floors and making good the same, claming at every open pipe ends by suitable plastic end - covers against entry of dust or any other foreign 50 Rmt. 19
material. Supply & Installation of galvanized floor junction boxes for raceways, of following sizes thick, fabricated out of 2.0 mm thick G.I. sheet with proper cutouts on the sides for pipe entry E-8 & screwed top cover with rubber gasket and suitable knockouts for flexible conduit outlets as per the drawing enclosed. All the junction boxes to be properly Earth - bonded with the raceways pipe using 12 SWG Copper bare wires as directed at site. E-8.1 200mm x 200mm x2.0 mm 20 No E-8.2 100mm x 100mm x2.0 mm 4 No E-8.3 300mm x 300mm x2.0 mm 9 No SECTION -E - Total Amt. NOTE : 1. Rate should be exclusive of GST. GST will be paid as per actual on quoted rates. 2. All items shall be mentioned in words in clear & legible capital letters and in the space provided after each item. TOTAL ELECTRICAL WORK =Section A+B+C+D+E TOTAL IN WORDS :- TAX Percentage Amount GST 18% Total After Adding GST Amount in words: 20