Catalog 2003 All Prices in Euro
SICUBE The 8 MT System Cubicle - Tailored To Your Needs SICUBE system cubicles offer more than conventional cubicle solutions: They are not products "off the shelf", but are instead tailored to the needs of each individual customer. SICUBE system cubicles are assembled and delivered to the customer's wishes, and always with the addition: "Ready for the electrical installation". SICUBE system cubicles are the ideal solution for all applications - is the system cubicle for the SIVACON 8PT design. This Catalog provides you an overview of our new product, the, the cubicle system for our SIVACON 8PT partners. Take a look for yourself, and see the many advantages of our cubicle systems with your own eyes! If you have any further questions, please do not hesitate to contact us. Tel.: +49 (0) 341/ 4470-471 +49 (0) 341 (0) 341/ 4470-493 Fax: +49 (0) 341 (0) 341 (0) 341/ 4470-460 E-mail: sicube.hotline@boe.siemens.de Internet: www.siemens/sicube.de You can also visit us on the Internet. There you will find all the necessary information regarding our cubicle series 8MF, 8MC and 8MT, as well as everything you need to know about climate control in the 8MR. Trademarks SICUBE is a registered trademark of Siemens AG. Third parties using for their own purposes any other names in this document which refer to trademarks might infringe upon the rights of trademark owners. Prices The prices specified in this Catalog are valid as of July 1, 2003. Siemens AG 2003
SICUBE 8MT System Cubicle General Introduction 1 Catalog 2003 8MT System Cubicle 2 Dimensional Drawings Special Colors Annex 3 4 5 The products and systems specified in the Catalog are sold and marketed using a DQScertified Quality Management System to DIN EN ISO 9001 (Certificate Reg. No.: 1258-03). The DQS Certificate is recognized in all EQ Net countries (Reg. No.: 1258).
1. General Introduction 1/2 1/2 1/3 1/4 1/5 at a Glance No end to the advantages General information on General information on the frame General information on the enclosure parts Siemens 2003 1/1
Introduction at a Glance Plenty of advantages... Customized solutions The color sets the tone Flexibility is given pride of Your cubicle will be delivered place in the 8MT cubicle in any standard RAL color system. within the standard delivery You only order what you really time, even multicolored and - need! And precisely that is upon request - in your favorite what will be delivered no color. matter whether you have ordered an empty or complete Individual details cubicle or fully equipped cubicle groups. Customized cutouts, e.g. for measuring instruments and control elements, vent slots, gills or windows, are delivered with no delay to the delivery time. Customized delivery Our control cubicles are delivered exactly as you wish: in single parts or readymounted - with base, swing frame, side walls, and, and, and Every required degree of protection All our cubicles can be ordered in any required degree of protection, e.g. in IP30, IP 40, IP 41 or IP 54. It is similarly no problem to upgrade your cubicle to a higher degree of protection later. Up to and including degree of protection IP41, all cubicles can be ordered with or without ventilation. Stainless Rust protection is a top priority for our cubicles: The frames are Sendzimirgalvanized, and the enclosure parts are powder-coated. Well packed on pallets Our cubicles and cubicle groups are generally delivered on wooden pallets this facilitates transport and increases the interest of accident prevention. Heavy metal Our system cubicles are suitable for heavy installations up to 1,000 kg. Ease of assembly Direct fastening devices on the frame of the provide for short assembly times. The hole matrix of the frame of the is 25 mm. Installation parts with grooving screws can be fastened here. No nuts, washers, lock washer or the like are required! EMC compliant The galvanized frame renders the 8MT compliant with the EMC requirements. Safe through grounding concept Thanks to the use of grooved screws, all enclosure and addon parts are integrated into the PE conductor circuit, i.e. no additional grounding measures are required. Another advantage: No grounding strap is needed thanks to the hinged grounding. Environment-friendly With all these advantages, we always devote special attention to environmental protection. For example, we use only environment-friendly paints which are solvent-free, lead-free and free of heavy metals. Powder recover in connection with our powder coating goes without saying. With the packaging, too, we reduce the use of materials to a minimum. Siemens 2003 1/2
Introduction at a Glance General information on Flexibility is given pride of place in the 8MT cubicle system. Configuring your is rendered considerably easier thanks to the further simplified modular system. Thanks to the great variety of mounting possibilities, mechanical components and electrical devices of all kinds, as well as all components of the metric and/or 19" technology, can be installed quickly and cost-effectively. The 8MT is an excellent supplement to our existing cubicle systems 8MC and 8MF and can be used both in industry and craft trades. The 8MT can be used to build up both small compact and conventionalscale control systems. It is tailored especially to the following fields of application: - automation technology - drive technology - control engineering - electronics (19" modular enclosure system) - power electronics - data information technology - network technology Scope of supply Standard cubicle Bolted and Sendzimir galvanized frame, profile folded three times, with 25 mm perforation Front door (right-hand hinges) or, with cubicle widths of 1,200 mm, double wing door; three individual locks with double-bit key, lock insert with 3 mm arbor, 180 hinges (opening angle with cubicle baying approx. 135 ) Rear panel folded and Sendzimir galvanized Roof panel flat, unfolded and Sendzimir galvanized Modular system Lateral enclosure Interior installation parts and accessories can be configured according to your requirements Material thickness Frame Side frame profile 2.5 mm steel Cross bar profile 2.5 mm steel sheet steel Enclosure Door 2 mm sheet steel Side and rear panels 1.5 mm sheet steel Roof panel 1.5 mm steel sheet Bottom plate 1.5 mm steel sheet Surfaces Frame Sendzimir galvanized Enclosure parts Side panels and doors powder-coated on both sides Rear panel Sendzimir galvanized Roof panel / bottom plate Sendzimir galvanized Finish Powder coating, surfaces in fine structure Moisture-proof F1 to SN 58 025, for installation in rooms Cubicle color RAL 7032 Other cubicle colors on request Siemens 2003 1/3
Introduction at a Glance General information on the frame Sizes In addition to the standard cubicles listed below, the can also be customized according to your particular requirements. This will always be based on a frame as the central component. Frame "without" a corner Thanks to the modular design, in addition to the specified standard sizes, any other cubicle dimensions can be delivered without problems. 25 mm hole matrix Can be combined in all variants Delivery as a flat-pack equally possible. Standard sizes Height Width Depth Material: 2.5 mm Sendzimir galvanized sheet steel folded 3 times 2,000 mm 2,200 mm mm mm 1,000 mm 1,200 mm 400 mm mm mm Siemens 2003 1/4
Introduction at a Glance General information on the enclosure parts Doors The doors are the full cubicle height; the clearance to the floor is 27.5 mm. The door opening angle is 180 (135 when installed in a line). Thanks to the external hinges, the doors of the 8MT can be opened widely, allowing a grounding which makes the use of grounding strips unnecessary. The doors consist of: 2 mm galvanized sheet steel Single 25 mm door fold Doors can be mounted either on the front or on the rear of the frame Door hinges either on the right or on the left (the doors are not symmetrical in their design and can therefore neither be reversed, nor installed upside-down) Various locking systems with or without espagnolette bar lock External hinges not hidden; color: Siemens petrol For the cubicle widths, and 1000 mm, a single wing door will be installed. Cubicle widths of 1,200 mm require a symmetrical double wing door. For cubicles exceeding a width of 1,000 mm, asymmetrical doors can be ordered. Cubicles providing the degrees of protection IP30, IP40 and IP41 are supplied with ventilation; IP40 and IP54 are not ventilated. Finish: powdered on both sides Outer and side panels Panel thickness 1.5 mm PE conductor realized via connection elements Rear panel folded and Sendzimir galvanized Side panel folded, powder-coated on both sides Degrees of protection up to IP54 Special colors on request Roof panel Panel plate thickness 1.5 mm, Sendzimir galvanized PE conductor realized via connection elements Cubicles providing the degrees of protection IP30, IP40 and IP41 are supplied with ventilation; IP40 and IP54 are not ventilated. Special colors on request Siemens 2003 1/5
2. 2/2 2/2 2/3 2/5 2/6 2/6 2/9 2/9 2/10 2/11 2/12 2/13 2/13 2/14 2/14 2/15 2/15 2/16 2/17 2/18 2/18 2/19 2/24 2/25 2/25 2/26 2/27 2/27 2/27 2/27 2/28 2/29 2/29 Ordering data for an 8MT standard cubicle Size, variant, order designation Order designation for cubicles with ventilation Order designation for cubicles without ventilation Ordering data for 8MT enclosure parts Doors Lateral enclosure Mounted windows Accessories - doors Machining of cutouts for enclosure parts Roof Ordering data for 8MT supporting structures / bottom plate Plinth Bottom plate Sponge rubber profile Ordering data for an 8MT cubicle accessories Internal installation parts Base plate, without components Base plate, with components Shelf Swing frame 19" fixed installation in cubicle heights 19" fixed installation in partial heights 19" fixed installation - accessories Cubicle illumination Grounding / shielding Circuit diagram pocket Screws / nuts / washers Repair paint Door keys Transport aids Ordering data for an 8MT cubicle connection Accessories "Cubicle baying" 2/30 Cubicle climate control Siemens 2003 2/1
Ordering data for a standard cubicle Size, variant, order designation Standard sizes Height Width Depth 2,000 mm 2,200 mm mm mm 1,000 mm 1,200 mm 400 mm mm mm Can be combined in all variants Standard variant Frame 2.5 mm profile, bolted and Sendzimir galvanized Front door (right-hand hinges) or, with cubicle widths of 1,200 mm, double wing door (single door fold, 25 mm) Three individual locks with double-bit key; lock insert with 3 mm arbor, color: Siemens petrol Rear panel folded and Sendzimir galvanized Roof panel plate flat, unfolded and Sendzimir galvanized Degrees of protection IP30, IP 40, IP41 with ventilation or IP40, IP 54 without ventilation to EN 60529 RAL 7032 Ordering designation for an 8MT standard cubicle Cubicle type 8MT1 Height Width Depth - Installation Parts group Degree of protection 0 2,000 mm - 0 with ventilation SC Complete 2 2,200 mm 1 without ventilation cubicles 6 mm 8 mm 1 1,000 mm 2 1,200 mm 4 400 mm 6 mm 8 mm IP 30 IP 40 IP 41 IP 54 Ordering example for an 8MT standard cubicle 8MT1 0 6 4-1 SC 54 2,000 mm mm 400 mm Without ventilation Complete cubicle IP 54 Cubicle dimensions and degrees of protection other than those specified above, as well as special accessories, available upon request. Siemens 2003 2/2
Ordering data for a standard cubicle Order designation for cubicles with ventilation IP30, with ventilation IP40, with ventilation Height x width x depth Price Height x width x depth Price 2,000 x 400 8MT1064-0SC30 8MT1066-0SC30 8MT1068-0SC30 287.00 298.00 308.00 2,000 x 400 8MT1064-0SC40 8MT1066-0SC40 8MT1068-0SC40 290.00 299.00 311.00 2,000 x 400 8MT1084-0SC30 8MT1086-0SC30 8MT1088-0SC30 319.00 330.00 340.00 2,000 x 400 8MT1084-0SC40 8MT1086-0SC40 8MT1088-0SC40 322,00 333,00 343,00 2,000 x 1,000 x 400 8MT1014-0SC30 8MT1016-0SC30 8MT1018-0SC30 396.00 406.00 417.00 2,000 x 1,000 x 400 8MT1014-0SC40 8MT1016-0SC40 8MT1018-0SC40 399.00 410.00 421.00 2,000 x 1,200 x 400 8MT1024-0SC30 8MT1026-0SC30 8MT1028-0SC30 429.00 440.00 451.00 2,000 x 1,200 x 400 8MT1024-0SC40 8MT1026-0SC40 8MT1028-0SC40 433.00 444.00 455.00 2,200 x 400 8MT1264-0SC30 8MT1266-0SC30 8MT1268-0SC30 295.00 307.00 317.00 2,200 x 400 8MT1264-0SC40 8MT1266-0SC40 8MT1268-0SC40 298.00 310.00 320.00 2,200 x 400 8MT1284-0SC30 8MT1286-0SC30 8MT1288-0SC30 328.00 339.00 349.00 2,200 x 400 8MT1284-0SC40 8MT1286-0SC40 8MT1288-0SC40 331.00 342.00 352.00 2,200 x 1000 x 400 8MT1214-0SC30 8MT1216-0SC30 8MT1218-0SC30 408.00 419.00 429.00 2,200 x 1,000 x 400 8MT1214-0SC40 8MT1216-0SC40 8MT1218-0SC40 412.00 423.00 433.00 2,200 x 1,200 x 400 8MT1224-0SC30 8MT1226-0SC30 8MT1228-0SC30 442.00 452.00 463.00 2,200 x 1,200x 400 8MT1224-0SC40 8MT1226-0SC40 8MT1228-0SC40 446.00 457.00 468.00 If you need the door with left-hand hinges, please append "-Z" to the order no. and add the text: Linksanschlag ("left-hand hinge"). Siemens 2003 2/3
Ordering data for a standard cubicle Order designation for cubicles with ventilation IP41, with ventilation Height x width x depth Price 2,000 x 400 2,000 x 400 8MT1064-0SC41 8MT1066-0SC41 8MT1068-0SC41 8MT1084-0SC41 8MT1086-0SC41 8MT1088-0SC41 298.00 309.00 320.00 331.00 342.00 353.00 2,000 x 1,000 x 400 2,000 x 1,200 x 400 2,200 x 400 8MT1014-0SC41 8MT1016-0SC41 8MT1018-0SC41 8MT1024-0SC41 8MT1026-0SC41 8MT1028-0SC41 8MT1264-0SC41 8MT1266-0SC41 8MT1268-0SC41 411.00 422.00 433.00 446.00 457.00 468.00 307.00 318.00 329.00 2,200 x 400 8MT1284-0SC41 8MT1286-0SC41 8MT1288-0SC41 340.00 352.00 363.00 2,200 x 1,000 x 400 8MT1214-0SC41 8MT1216-0SC41 8MT1218-0SC41 423.00 435.00 446.00 2,200 x 1200x 400 8MT1224-0SC41 8MT1226-0SC41 8MT1228-0SC41 459.00 470.00 481.00 Siemens 2003 2/4
Ordering data for a standard cubicle Order designation for cubicles without ventilation IP40, without ventilation IP54, without ventilation Height x width x depth Price Height x width x depth Price 2,000 x 400 8MT1064-1SC40 8MT1066-1SC40 8MT1068-1SC40 276.00 286.00 296.00 2,000 x 400 8MT1064-1SC54 8MT1066-1SC54 8MT1068-1SC54 325.00 336.00 346.00 2,000 x 400 8MT1084-1SC40 8MT1086-1SC40 8MT1088-1SC40 307.00 317.00 327.00 2,000 x 400 8MT1084-1SC54 8MT1086-1SC54 8MT1088-1SC54 358.00 369.00 380.00 2,000 x 1,000 x 400 8MT1014-1SC40 8MT1016-1SC40 8MT1018-1SC40 381.00 391.00 401.00 2,000 x 1,000 x 400 8MT1014-1SC54 8MT1016-1SC54 8MT1018-1SC54 460.00 472.00 482.00 2,000 x 1,200 x 400 8MT1024-1SC40 8MT1026-1SC40 8MT1028-1SC40 413.00 423.00 433.00 2,000 x 1,200 x 400 8MT1024-1SC54 8MT1026-1SC54 8MT1028-1SC54 503.00 513.00 524.00 2,200 x 400 8MT1264-1SC40 8MT1266-1SC40 8MT1268-1SC40 284.00 295.00 305.00 2,200 x 400 8MT1264-1SC54 8MT1266-1SC54 8MT1268-1SC54 339.00 349.00 360.00 2,200 x 400 8MT1284-1SC40 8MT1286-1SC40 8MT1288-1SC40 315.00 326.00 336.00 2,200 x 400 8MT1284-1SC54 8MT1286-1SC54 8MT1288-1SC54 372.00 383.00 325.00 2,200 x 1,000 x 400 8MT1214-1SC40 8MT1216-1SC40 8MT1218-1SC40 392.00 403.00 413.00 2,200 x 1,000 x 400 8MT1214-1SC54 8MT1216-1SC54 8MT1218-1SC54 478.00 489.00 499.00 2,200 x 1200x 400 8MT1224-1SC40 8MT1226-1SC40 8MT1228-1SC40 425.00 435.00 446.00 2,200 x 1200x 400 8MT1224-1SC54 8MT1226-1SC54 8MT1228-1SC54 520.00 531.00 542.00 If you need the door in the left-hand stop variant, please add the order no. by "-Z" and the text: Linksanschlag ("left-hand stop"). Siemens 2003 2/5
Ordering data for enclosure parts Doors Single wing door instead of rear panel Degree of protection Cubicle height Cubicle width Right-hand Left-hand Supplement IP 40 Without ventilation 2,000 1,000 8MT1061-2TR40 8MT1081-2TR40 8MT1011-2TR40 8MT1061-2TL40 8MT1081-2TL40 8MT1011-2TL40 42.20 48.60 59.50 2,200 1,000 8MT1261-2TR40 8MT1281-2TR40 8MT1211-2TR40 8MT1261-2TL40 8MT1281-2TL40 8MT1211-2TL40 37.20 43.60 54.50 IP 54 Without ventilation 2,000 1,000 8MT1061-2TR54 8MT1081-2TR54 8MT1011-2TR54 8MT1061-2TL54 8MT1081-2TL54 8MT1011-2TL54 66.30 87.80 111.50 2,200 1,000 8MT1261-2TR54 8MT1281-2TR54 8MT1211-2TR54 8MT1261-2TL54 8MT1281-2TL54 8MT1211-2TL54 61.30 82.80 106.50 IP 30 With ventilation 2,000 1,000 8MT1060-2TR30 8MT1080-2TR30 8MT1010-2TR30 8MT1060-2TL30 8MT1080-2TL30 8MT1010-2TL30 44.40 50.00 61.50 2,200 1,000 8MT1260-2TR30 8MT1280-2TR30 8MT1210-2TR30 8MT1260-2TL30 8MT1280-2TL30 8MT1210-2TL30 39.40 45.00 56.50 IP 40 with ventilation 2,000 1,000 8MT1060-2TR40 8MT1080-2TR40 8MT1010-2TR40 8MT1060-2TL40 8MT1080-2TL40 8MT1010-2TL40 45.40 51.10 62.60 2,200 1,000 8MT1260-2TR40 8MT1280-2TR40 8MT1210-2TR40 8MT1260-2TL40 8MT1280-2TL40 8MT1210-2TL40 40.40 46.10 57.60 Vent slots, see page 2/8 Siemens 2003 2/6
Ordering data for enclosure parts Doors Symmetrically divided double wing door instead of rear panel Symmetrically divided double wing doors can be ordered for 1,200 mm standard cubicles. (The photo above shows the variant with the lock on the right.) Degree of protection Cubicle width Cubicle height Lock on the right Lock on the left Supplement IP 40, without ventilatio 1,200 2,000 2,200 8MT1021-2SR40 8MT1221-2SR40 8MT1021-2SL40 8MT1221-2SL40 79.30 83.30 IP 30, with ventilatio 1,200 2,000 2,200 8MT1020-2SR30 8MT1220-2SR30 8MT1020-2SL30 8MT1220-2SL30 83.40 87.60 IP 40, with ventilatio 1,200 2,000 2,200 8MT1020-2SR40 8MT1220-2SR40 8MT1020-2SL40 8MT1220-2SL40 85.40 89.70 IP 54, without ventilatio 1,200 2,000 2,200 8MT1021-2SR54 8MT1221-2SR54 8MT1021-2SL54 8MT1221-2SL54 127.30 133.70 Vent slots, see page 2/8 Asymmetrically divided double swing door In the standard variant, asymmetrically divided double swing doors possess one wing mm in width and a second wing which corresponds to the remaining frame width. The lock is always installed in the narrower door half. (The photo above shows the variant with the lock on the right.) Further door divisions are possible. The doors can be mounted either on the front or on the rear. The resulting extra-charge can be determined upon request on the basis of the individual application and the required degree of protection upon request. Vent slots, see page 2/8 Siemens 2003 2/7
Ordering data for enclosure parts Doors Glass doors instead of standard door For doors with widths between and mm, glass doors can be delivered with degrees of protection IP 40 or IP 54 without ventilation. Degree of protection Cubicle height Cubicle width Right-hand Left-hand Supplement IP 40 Without ventilation 2,000 8MT1060-2FR40 8MT1080-2FR40 8MT1060-2FL40 8MT1080-2FL40 135.20 151.00 2,200 8MT1260-2FR40 8MT1280-2FR40 8MT1260-2FL40 8MT1280-2FL40 135.20 151.00 IP 54 Without ventilation 2,000 8MT1060-2FR54 8MT1080-2FR54 8MT1060-2FL54 8MT1080-2FL54 135,20 151.00 2,200 8MT1260-2FR54 8MT1280-2FR54 8MT1260-2FL54 8MT1280-2FL54 135.20 151.00 Vent slot cross-sections IP30 vent slots Vent slot cross-section 8MT vent slots per row for cubicle door mm in width 8MT vent slots per row for cubicle door mm in width 8MT vent slots per row for cubicle door 1,000 mm in width 8MT vent slots per row for cubicle door 1,200 mm in width 86 cm² 131 cm² 156 cm² 172 cm² IP40 / IP41 vent slots Vent slot cross-section 8MT vent slots per row for cubicle door mm in width 8MT vent slots per row for cubicle door mm in width 8MT vent slots per row for cubicle door 1,000 mm in width 8MT vent slots per row for cubicle door 1,200 mm in width 52 cm² 72 cm² 93 cm² 104 cm² IP30, IP40 and IP41 cubicles with ventilation will be provided 4 rows of vent slots in the standard variant. Siemens 2003 2/8
Ordering data for enclosure parts Lateral enclosure Side panel The side panels are used to complete cubicle or cubicle groups; they consist of 1.5 mm sheet steel. If one side panel is ordered but no side is specified, we will mount the side panel on the right-hand side. Cubicle height Cubicle Depth Price 2,000 400 8MT1004-2SW40 8MT1006-2SW40 8MT1008-2SW40 24.90 34.90 42.80 2,200 400 8MT1204-2SW40 8MT1206-2SW40 8MT1208-2SW40 26.60 36.50 43.30 Partition wall The partition wall divides several cubicles within a cubicle group. If one partition wall is ordered but no side is specified, we will mount the partition on the left-hand cubicle side. Cubicle height Cubicle Depth Unit price 2,000 400 8MT1004-2TW00 8MT1006-2TW00 8MT1008-2TW00 17.70 24.80 31.80 2,200 400 8MT1204-2TW00 8MT1206-2TW00 8MT1208-2TW00 19.40 26.50 33.60 Further variants of partition walls, e.g. with cutouts for connector housings, cable glands or the like, upon request. Mounted windows Mounted windows Mounted windows can be mounted on any metal enclosure part. They are supplied as follows: Anodized aluminum frame with 3mm makrolon glass One (from a height of mm: two) cylinder lock (s) (cam lock) 180 hinges The degree of protection is IP 54.. Height 500 1,000 Width 500 500 500 500 8MT1550-2AF54 8MT1650-2AF54 8MT1850-2AF54 8MT1150-2AF54 Unit price 105.60 114.60 132.50 149.70 Siemens 2003 2/9
Ordering data for enclosure parts Accessories - doors Lock types / lock parts Three individual locks with a 3 mm double-bit key are available for the in the standard variant. In addition, a large variety of locks is offered as listed in the following. To enhance the ease of handling, the 8MT system cubicle can be upgraded with a variety of handle variants. 3 Individual locks Lock insert Dimensions Price Double-bit key 5 8MT1901-2AA00 2.10 Square 6 7 8 8MT1902-2AA00 8MT1903-2AA00 8MT1904-2AA00 2.10 2.10 2.10 Triangular 7 8 8MT1905-2AA00 8MT1906-2AA00 2.10 2.10 Handle 8MT1907-2AA00 2.80 Espagnolette lock with lock-and-release lever The espagnolette lock with lock-and-release lever is provided with a press button. If any other lock inserts are used, these must be ordered additionally. Lock parts - designation Price Pivoted lever RAL 6034 with press button Cubicle height 2,000 Cubicle height 2,200 8MT1918-2AA00 8MT1920-2AA00 21.80 22.20 Lock insert Dimensions Price Profile cylinder to DIN 18252 - Same keys - Different keys 8MT1921-2AA00 8MT1922-2AA00 19.40 17.90 Daimler-Benz arbor 8MT1923-2AA00 8.45 Square 6 7 8 Triangular 7 8 Further lock systems and handles on request 8MT1924-2AA00 8MT1925-2AA00 8MT1926-2AA00 8MT1927-2AA00 8MT1928-2AA00 8.45 8.45 8.45 8.45 8.45 Siemens 2003 2/10
Ordering data for enclosure parts Machining of cutouts for enclosure parts The mechanical customization of enclosure parts of the cubicles is one of our strengths. A cubicle could be configured as follows: four cutouts for measuring instruments, and three holes for controls right-hand side wall with seven cutouts for connector housings left-hand partition with cutout for cable gland Ordering example for the above cubicle Cubicle 2,000xx, IP30, with ventilation right-hand side panel, powder-coated left-hand partition, and mechanical customization as per specifications above To receive a cubicle as described above, you must order as follows: Item Designation Qty. Price 1.1 1.2 1.3 1.4 1.5 1.6 1.7 1.8 Cubicle Side panel, powder-coated Partition Mechanical customization base price Rectangular cutout, small Single hole, small Rectangular cutout, large Assembly 1 1 1 3 11 3 1 1 8MT1066-0SC30 8MT1006-2SW40 8MT1006-2TW00 298.00 34.90 24.80 21.30 35.20 2.70 6.30 - Total price 423.20 Annex: Sketches for cutouts and arrangements The prices below can be used for a rough calculation for the customization of the enclosure parts. Our delivery options, however, are in no way limited to just the examples given in this list. Single Holes Technical Information Unit price Base price for customization per part Single hole, small; round / square, up to 30 mm Single hole, large; round / square, larger than 30 mm and up to 50 mm 7.10 0.90 1.40 Rectangular cutouts Sum of height and width Rectangular cutout, small Rectangular cutout, large IP30 / IP40 vent slots < 0.5 m > 0.5 m Vent slot cross-section 3.20 6.30 8MT vent slots per row for cubicle door mm in width 8MT vent slots per row for cubicle door mm in width 8MT vent slots per row for cubicle door 1,000 mm in width 8MT vent slots per row for cubicle door 1,200 mm in width 86 cm²/ 52 cm² 131 cm²/ 72 cm² 156 cm²/ 93 cm² 172 cm²/ 104 cm² 2.00 3.00 3.50 4.00 Siemens 2003 2/11
Ordering data for enclosure parts Roof The roof panel is included in the scope of supply of the standard cubicle and is delivered matching to the degree of protection of the cubicle. Vent slot cross-sections in cm², see Table. Width Depth IP 30 IP 40/IP41 mm 400 mm mm mm 518.4 725.7 933.1 311.0 435.4 559.8 mm 400 mm mm mm 710.4 994.6 1,278.7 426.2 596.7 767.2 1,000 mm 400 mm mm mm 902,4 1,263.3 1,624.3 541.4 758.0 974.5 1,200 mm 400 mm mm mm 1,094.4 1,532.1 1,969.9 656.6 919.2 1,181.9 Siemens 2003 2/12
Ordering data for supporting structures / bottom plate Plinth Plinths increase the floor clearance and make the insertion and assigning of cables easier. The plinths are delivered without intermediate trim. End trim must be ordered for the overall installation. The plinth feet are made of 2.5 mm Sendzimir-galvanized steel sheet, and the plinth trim of 2mm powder-coated sheet steel. The load bearing capacity of the plinths is 500 kg. The plinths can also be ordered in individual parts. Plinth complete Plinth height Cubicle width Cubicle Depth Price 200 mm 400 8MT1364-2SS40 8MT1366-2SS40 8MT1368-2SS40 39.20 39.20 39.20 400 8MT1384-2SS40 8MT1386-2SS40 8MT1388-2SS40 43.90 43.90 43.90 1,000 400 8MT1314-2SS40 8MT1316-2SS40 8MT1318-2SS40 48.60 48.60 48.60 1,200 400 8MT1324-2SS40 8MT1326-2SS40 8MT1328-2SS40 53.60 53.60 53.60 End trim Designation Selling unit Cubicle depth Trim 1 set (2 pcs.) 400 8MT1340-2SS00 8MT1360-2SS00 8MT1380-2SS00 Unit price 7.10 9.60 11.95 Siemens 2003 2/13
Ordering data for supporting structures / bottom plate Bottom plate The bottom plate is a 2 mm steel sheet, Sendzimir galvanized and single-divided. Furthermore, it is also possible to mount the bottom plate to the cubicle any time later. Cubicle width Cubicle Depth Price 400 8MT1964-2BB40 8MT1966-2BB40 8MT1968-2BB40 33.20 39.90 46.60 400 8MT1984-2BB40 8MT1986-2BB40 8MT1988-2BB40 39.90 46.50 53.20 1,000 400 8MT1914-2BB40 8MT1916-2BB40 8MT1918-2BB40 45.50 52.50 59.20 1,200 400 8MT1924-2BB40 8MT1926-2BB40 8MT1928-2BB40 51.60 58.20 64.80 Sponge rubber profile Sponge rubber profile The sponge rubber profile serves to seal cable glands. It is provided with adhesive tape on one side. Designation Length Unit price Sponge rubber 20 x 20 mm 1,000 8MT1992-2AA00 4.20 Siemens 2003 2/14
Ordering data for cubicle accessories Internal installation parts If you wish the internal installation parts to be delivered ready-assembled, please send us an installation diagram. Supporting bar Using the supporting bars, the cubicles can be divided into the appropriate planes. The supporting bars are made of 2.5 mm zinc sheet. The profile of the supporting bars takes the form of a "U" and is provided with 5.4 mm holes in a 25-mm hole matrix. The supporting bars are mounted directly on the cubicle frame or on other supporting bars. Supporting bar for cubicle Height 2,000 Height 2,200 8MT1000-2TH00 8MT1200-2TH00 Unit price 7.37 8.19 Width Width Width 1,000 Width 1,200 8MT1960-2TH00 8MT1980-2TH00 8MT1910-2TH00 8MT1920-2TH00 7.23 7.84 8.46 9.08 Depth 400 Depth Depth 8MT1904-2TH00 8MT1906-2TH00 8MT1908-2TH00 2.26 3.38 4.45 C-profile / cable clamping bar C-profile bars can be used to divide the cubicle into many levels for the suspension of loads. Bar for Cubicle Unit price C 40 Width Width Width 1,000 Width 1,200 8MT1960-2CS00 8MT1980-2CS00 8MT1910-2CS00 8MT1920-2CS00 10.55 12.35 13.60 14.15 Depth 400 Depth Depth 8MT1904-2CS00 8MT1906-2CS00 8MT1908-2CS00 8.85 10.55 12.35 Siemens 2003 2/15
Ordering data for cubicle accessories Base plate, without components Mounting plate including mounting bracket Mounting plates are used both for control cubicle installation and for building up devices (also outside the cubicle). They are mounted on the cubicle frame (side frame) with six brackets and are made of 2.5 mm galvanized steel sheet. Mounting plates can be delivered in the cubicle height, or alternatively in partial heights. Mounting plates in the cubicle height Thanks to guiding aids, the installation of mounting plates is considerably easier and runs literally "as on rails". Height x width x depth Price 2,000 x 400 8MT1064-2MB00 8MT1066-2MB00 8MT1068-2MB00 42.50 42.90 43.30 2,000 x 400 8MT1084-2MB00 8MT1086-2MB00 8MT1088-2MB00 49.10 49.50 49.90 2,000 x 1,000 x 400 8MT1014-2MB00 8MT1016-2MB00 8MT1018-2MB00 55.90 56.30 56.70 2,000 x 1,200 x 400 8MT1024-2MB00 8MT1026-2MB00 8MT1028-2MB00 63.20 63.50 63.90 2,200 x 400 8MT1264-2MB00 8MT1266-2MB00 8MT1268-2MB00 46.40 46.80 47.10 2,200 x 400 8MT1284-2MB00 8MT1286-2MB00 8MT1288-2MB00 53.20 53.50 53.90 2,200 x 1,000 x 400 8MT1214-2MB00 8MT1216-2MB00 8MT1218-2MB00 59.70 60.10 60.50 2,200 x 1,200 x 400 8MT1224-2MB00 8MT1226-2MB00 8MT1228-2MB00 66.30 66.60 66.90 Siemens 2003 2/16
Ordering data for cubicle accessories Base plate, without components Mounting plates in partial heights Partial Height Cubicle width Price 100 1,000 1,200 8MT1760-2MB00 8MT1780-2MB00 8MT1710-2MB00 8MT1720-2MB00 10.60 12.00 13.40 14.85 200 1,000 1,200 8MT1360-2MB00 8MT1380-2MB00 8MT1310-2MB00 8MT1320-2MB00 14.50 16.25 18.00 19.75 400 1,000 1,200 8MT1460-2MB00 8MT1480-2MB00 8MT1410-2MB00 8MT1420-2MB00 20.85 22.90 25.40 27.20 Base plate, with components Cable channel to DIN 43659, form B (slotted) Cable channels not assembled are not included in the scope of supply. Channel Height Channel Width Price / Meter 50 50 75 125 3.80 4.70 7.60 75 25 37,5 50 100 3.10 3.45 3.80 4.95 Top-hat rail Designation Top-hat rail 1.5 LL Zn Top-hat rail 1.5 LL Zn G rail EN 50 035 Dimensions 35 x 7.5 mm 35 x 15 mm G32/15/9 Price / Meter 2.07 4.00 4.83 Siemens 2003 2/17
Ordering data for cubicle accessories Shelves Shelves Shelves can be delivered for fixed installation. The maximum width of a shelf is calculated as the cubicle rated width minus 60 mm. Cubicle width Cubicle Depth Unit price Standard shelf (fixed installation) 400 8MT1964-2FB00 8MT1966-2FB00 8MT1968-2FB00 15.90 19.40 22.90 400 8MT1984-2FB00 8MT1986-2FB00 8MT1988-2FB00 19.40 22.90 26.50 1,000 400 8MT1914-2FB00 8MT1916-2FB00 8MT1918-2FB00 22.90 26.40 30.00 1,200 400 8MT1924-2FB00 8MT1926-2FB00 8MT1928-2FB00 26.50 29.90 33.50 Conditions: Shelf depth 400 = can be used with all cubicle depths Shelf depth = can be used with all cubicle depths except 400 Shelf depth = can be used with all cubicle depths except 400 and Load bearing capacity: 80 kg If shelf and cubicle depth are different, 2 supporting bars are required. Swing frame Swing frame The swing frame consists of welded 19" profiles. The frame is mounted in the cubicle using a set of crossbars; mounting is possible either with right-hand or left-hand hinges (the hinge side can be changed by turning the frame). If the hinge position is not indicated when submitting the order, the installation is performed with left-hand hinges. Surface: galvanized The swing frame is installed at cubicle height. In the case of cubicle widths of and mm, the installation will be performed centrally. Swing frame Cubicle height Cubicle width Unit price 38 height modules 2,000 8MT1060-2NT00 8MT1080-2NT00 236.00 245.00 43 height modules 2,200 8MT1260-2NT00 8MT1280-2NT00 242.00 251.00 The crossbar for the hinged frame is standard with the 8MT cubicle system and need not be ordered separately. Siemens 2003 2/18
Ordering data for cubicle accessories 19" fixed installation in cubicle heights 19" fixed installation 8MT system cubicles components designed in the 19" technology can be installed both over the entire cubicle height and in partial heights. For the system parts, 2.5 mm galvanized sheet steel was used to ensure optimum contacting. In the frame, the components can be installed in the 25 mm hole matrix. The individual components and 19" technology are mounted using selftapping screws M6. Unless otherwise desired, the installation is performed centrally in the control cubicle and at the front-most position; with the double-wing variant, additionally at the rearmost position. 19" fixed installation in cubicle height, front position only The mounting sets consists of 4 mounting brackets and 2 profile bars (19" hole matrix) and the mounting accessories. Cubicle height Cubicle Depth Price 2,000 400 8MT1004-2NT00 8MT1006-2NT00 8MT1008-2NT00 30.00 31.70 33.30 2,200 400 8MT1204-2NT00 8MT1206-2NT00 8MT1208-2NT00 31.00 32.60 34.30 19" profile bar for rear installation For installation in the rear, an additional set of profile bars (2 pcs.) can be ordered. Cubicle height Price / Set 2,000 8MT1000-2NZ00 16.10 2,200 8MT1202-2NZ00 17.00 Siemens 2003 2/19
Ordering data for cubicle accessories 19" fixed installation in partial heights 19" fixed installation in partial heights To customize your 8MT system cubicle, various combinations can be configured. To this end, only a part of the cubicle is modified for the installation of 19" components. The 19" installations can be performed in any desired height. An offset both in the depth and in the height (25 mm hole matrix) is also possible. Depending on the arrangement, two or four supporting bars in cubicle width are required for the installation. The rows of holes in the crossbars are used for installation at the very top or very bottom. Thus, only two additional supporting bars are required (see page 2/15). The mounting brackets for the profile bars must be ordered in the cubicle depth. Four mounting brackets (1 set) and two profile bars (1 set) are required per installation. To make the ordering process easier, decide for yourself which variant you need, and then customize your cubicle with the appropriate components. Mounting bracket for 19" profile bars. One set consists of 4 mounting brackets. Depths Price / Set 400 8MT1904-2NZ00 5.00 8MT1906-2NZ00 5.35 8MT1908-2NZ00 5.65 19" profile bars are offered in the following variants. One set consists of 2 profile bars. Price / Set 3 height modules 8MT1941-2AA00 8.00 6 height modules 8MT1942-2AA00 8.60 9 height modules 8MT1943-2AA00 9.20 12 height modules 15 height modules 18 height modules 21 height modules 24 height modules 27 height modules 30 height modules 33 height modules 36 height modules 8MT1944-2AA00 9.80 8MT1945-2AA00 10.50 8MT1946-2AA00 11.40 8MT1947-2AA00 11.80 8MT1948-2AA00 12.50 8MT1950-2AA00 13.10 8MT1951-2AA00 13.70 8MT1952-2AA00 14.40 8MT1953-2AA00 15.00 Siemens 2003 2/20
Ordering data for cubicle accessories 19" fixed installation - accessories Price Cover 1 height modules 8MT1954-2AA00 1.80 Cover 3 height modules 8MT1955-2AA00 2.,55 Cover 6 height modules 8MT1956-2AA00 3.70 Shelf 400 for cover 8MT1957-2AA00 11.00 Shelf 400 front-side installation 8MT1958-2AA00 11.00 7XP mounting frame 7 height modules 8MT1960-2AA00 7.05 7XP - cover 1/6 8MT1961-2AA00 0.80 7XP - cover 2/6 8MT1962-2AA00 1.15 7XP - cover 3/6 8MT1963-2AA00 1.50 Cubicle illumination Door position switch To switch on / off the cubicle lamp or a current circuit with opening / closing of the cubicle door. The door position switch is mounted on the side of the door hinges by default. Designation Unit price Single: 1 normally open contact + 1 normally closed contact Double: 1 normally open contact + 2 normally closed contacts 8MT1964-2AA00 8MT1965-2AA00 13.20 14.95 Control cubicle lamp with fluorescent tubular lamp The cubicle lamp is intended especially for use in switchgear and control cubicles. A completely new mounting technology using adhesive magnets kind makes all mounting work for installation on paneling parts unnecessary. A plinth outlet with grounding contact, as well as an ON/OFF switch are provided in the plastic casing. The cubicle lamp is supplied without cable. Replacement tubes can be ordered from OSRAM: SPD1411-2B. To realize a statically fixed connection of the control cubicle lamp to the frame, two plug-on bars are required. Designation Unit price Control cubicle lamp 11 W Plug-on bar 8MT1966-2AA00 8MT1967-2AA00 37.00 7.00 Siemens 2003 2/21
Ordering data for cubicle accessories Grounding / shielding Grounding plate Thanks to the self-tapping bolt technology used with the 8MT cubicle, it is not necessary to ground enclosure parts or any other parts screwed to the frame. We offer the following material upon request: Designation Unit price Grounding plate 8MT1968-2AA00 2,60 Shield busbars Designation Unit price Shield busbars for the following cubicle widths - For cubicle width / depth 400 mm - For cubicle width / depth mm - For cubicle width / depth mm - For cubicle width / depth 1,000 mm - For cubicle width / depth 1,200 mm 8MT1970-2AA00 8MT1971-2AA00 8MT1972-2AA00 8MT1974-2AA00 8MT1975-2AA00 10.20 14.10 18.35 22.65 26,80 Siemens 2003 2/22
Ordering data for Other cubicle accessories Circuit diagram pocket The circuit diagram pocket serves to accommodate documents. The following variant is available: - A4 portrait, 30 mm deep, plastic adhesive mounting Designation Unit price Plastic 8MT1976-2AA00 6.70 Screws / nuts / washers To fasten the components in the 8MT cubicle, we offer the following screws, nuts and washers. Designation Selling Unit Unit price Self-tapping screws M6 Contact washers M6 200 pcs. 200 pcs. 8MT1977-2AA00 8MT1978-2AA00 11.30 2.80 Repair paint For repair work on powder-coated or wet-painted surfaces. Please quote the RAL number when ordering. Designation Price RAL???? 8MT1980-2AA00 30.00 Door keys Door keys are delivered with each lock insert when ordering cubicles. The following are supplied as replacements: Designation Dimensions mm Unit price Square 6 7 8 8MT1983-2AA00 8MT1984-2AA00 8MT1985-2AA00 1.40 1.40 1.40 Triangular 7 8 8MT1986-2AA00 8MT1987-2AA00 1.40 1.40 Double-bit key 3 5 8MT1988-2AA00 8MT1990-2AA00 1.40 1.40 Daimler-Benz insert 8MT1991-2AA00 1.40 Siemens 2003 2/23
Ordering data for Other cubicle accessories Transport aids Transport aids can only be ordered in conjunction with a cubicle or a cubicle group. Eyebolts By using eyebolts, it is possible to lift a cubicle (to DIN 580). When doing so, the eyebolts are fastened using captive nuts. Recommendation: The whole weight suspended on the crane hook should not exceed 500 kg. Set Price / Set 4 pcs. 8MT1993-2AA00 10.55 Transport rails Transport rails are used to transport cubicle groups with a crane. Whereas eyebolts do not ensure an even / simultaneous suspension of the suspended load by the lifting tackle, this is ensured by a transport rail reaching over the whole length of a cubicle group. Designation Price / meter Transport bracket, 1 pair per running meter RAL 3000 8MT1994-2AA00 31.80 Lengths exceeding 2,400 mm upon request. Siemens 2003 2/24
Ordering data for cubicle baying Cubicle baying accessories Mounting set The mounting set for cubicle baying consists of: Designation Price Mounting set 8MT1995-2AA00 2.70 Sealing material For the baying of two cubicles in the degree of protection IP 54. Designation Price Sealing set 8MT1996-2AA00 5.30 Siemens 2003 2/25
Cubicle climate control Cubicle climate control Heating, ventilation, cooling.. You will find our large choice of products for the climate control of control cubicles in the "Power Distribution LV30" Catalog (order no.: E86060-K1801-A101-A4) or on the Internet at www.siemens.de/sicube. The system cutouts for climate control of the 8MR cubicles will naturally be provided at no extra cost.. Central Office: Electrokavir Co. Under License of SIEMENS KAVIR Bldg. No. 374 Mirdamad Ave, TEHRAN 15189 - IRAN _ P.O. Box: 15189-65514 Tel: +98 21 88677210 (10Line), 88788125, 88796486, 88783156, Fax: +98 21 88789448 Web: www.electrokavir.com Email: info@electrokavir.com Factory: KHEZRABAD, YAZD - IRAN Tel: +98 351 7272974-6 Fax: +98 351 7272386 Siemens 2003 2/26
Ordering possibilities An Information Flyer If you have any questions regards or our other cubicle systems, the 8MF and the 8MC, do not hesitate to contact us. You can also obtain information on our cubicle systems from the Internet. http://www.siemens.de/sicube You can contact our sales and marketing staff under the following telephone numbers: Contact persons Technical questions: Mr. Perl ++49 (0) 341.4470.462 Commercial questions: Mr. Schulze ++49 (0) 341.4470.341 Sales and marketing staff Ms. Walther ++49 (0) 341.4470.493 Issued by Automation & Deives Low-Voltage Switchgear Division Siemens Aktiengesellschaft Subject to change without prior notice or by fax: or via e-mail: ++49 (0) 341.4470.460 sicube.hotline@boe.siemens.de An Information Flyer
Siemens Deutschland An Information Flyer has been developed on the basis of the SIVACON 8PT switchgear, and is thus an excellent addition to our existing system cubicles. is the system cubicle for the 8PT design. rounds off the spectrum of the system cubicle series 8MC and 8MF that have existed to date. can be used both in industry and the craft trades, and is tailored especially to the following fields of application: automation technology drive technology control engineering electronics (19" modular enclosure system) power electronics data information technology network technology Technical Description Frame: Doors: Enclosures: The Advantages of the Degrees of protection bolted and sendzimir galvanized, 2.5 mm sheet steel, profile folded three times, with 25 mm perforation 2 mm sheet steel, powdercoated can be mounted on the frame both on the front and on the rear external hinges; color: Siemens petrol back panel 1.5 mm sheet steel, folded and sendzimir galvanized side panels 1.5 mm sheet steel, folded and powder-coated top plate 1.5 mm sheet steel, sendzimir galvanized bottom plate 1.5 mm sheet steel, sendzimir galvanized The is available in all degrees of protection no matter whether IP 30 or IP 54. And what's more: It's absolutely no problem to upgrade later. Logistics-optimized Safe through grounding concept Heavy metal Further advantages Our control cubicles are delivered exactly as you wish: in single parts or mounted completely with base, swing frame, and, and, and Thanks to the use of grooved screws, all enclosure and add-on parts are integrated into the PE conductor circuit, i.e. no additional grounding measures are required. Another advantage: No grounding strap is needed thanks to the hinged grounding. Our cubicle systems are designed for extra-heavy installations up to 1,000 kg. large choice of colors stainless simple assembly possibilities of mounting directly on the frame customized solutions short delivery times Flexibility is the strength of the 8MT cubicle system! You only order what you really need! And precisely that is what will be delivered no matter whether you have ordered an empty or complete cubicle or fully equipped cubicle groups.