Stubble cultivator with multipurpose tines CULTIMER L www.kuhn.com be strong, be KUHN
2
CULTIMER L 1000 MULTIPURPOSE TO THE TIP OF ITS TINES You want to carry out surface stubble cultivation, 3-7 cm, and setting up a real stale seedbed. You want to carry out stubble cultivation and incorporate straw to a depth of 7-15 cm, in order to keep organic matter near the surface. You want to carry out deep stubble cultivation down to 35 cm, and replace plough use. You would like to loosen the soil deep down for good water penetration, and for lower power consumption, thus fuel consumption. You consider quick, easy settings to be of upmost importance. You would like a machine that can adapt to all of your soil types, with a tine that is stable in the ground. You want to reduce operating costs by using carbide wear parts. Opt for a CULTIMER L, to be able to adapt to different types of jobs, be sure of getting high quality work done with a simple, robust, effi cient, and versatile tool, and reduce maintenance costs by using high quality wear parts. These 3 advantages combined in one package, make this machine one of the most versatile and effi cient stubble cultivators on the market. KUHN stubble cultivators with multipurpose tines in brief: Models Number of tines Working width (m) CULTIMER L 4000 13 4.00 CULTIMER L 5000 16 5.00 CULTIMER L 6000 19 6.00 3
CULTIMER L 1000 WITH HIGH QUALITY STUBBLE CULTIVATION, YOU CAN ONLY WIN! SOIL DEPTH MAINTAINED BY 600 KG TINES 1 The tine s working depth is maintained at a constant level thanks to the new double spring mechanical Non-Stop safety system. In any soil type, and especially in stony soil, the 600 to 800 kg tip pressure carries out homogeneous work. 2 2 High quality materials are used to produce this robust design. Drop-forged fl ange and beam. 1 2 4
EXCEPTIONAL MIXING QUALITY The curved shape and bevelled defl ectors carry out a homogeneous straw and soil mix. The soil is ejected to the front and taken again by the tine. 3 3 Effi cient work, even in stony ground. The tine is made of high tensile strength steel so can shift to the side before shifting vertically. 5
CULTIMER L 1000 WELL LEVELLED SOIL FOR QUALITY STUBBLE CULTIVATION To achieve quality work, it is necessary to have well levelled soil and a good straw spread. On a fl at surface, the roller works more effectively and its pressure on the soil is homogeneous which prevents any windblown effect. levelling discs: Elastomer safety makes them highly versatile in any conditions, including stony ground. EVERY SITUATION HAS ITS ROLLER Depending on your soil type, KUHN has the roller that best suits your situation. From the lightest to the heaviest, each model has its specialty: 6 T-Ring: light roller, aggressive on clods and straw. Maintains good coarse soil. Ideal for silty soils. 600 mm and 130 kg/m (available season 2015). T-Liner: the new light multipurpose roller for stony and wet conditions. It is as aggressive as the T-Ring. 600 mm and 140 kg/m in treated steel. Impact and wear resistant.
The CULTIMER L has exceptional driving capacity to work in any type of crop residue, including grain corn. With 85 cm under-frame clearance and 70 cm beam spacing, residues are incorporated into the soil with no problem of blockage. The tines are positioned every 30 cm which is the optimum spacing for residue passage. The machine works well, even at high speeds. Packliner: rubber coated roller, ideal in light soil or to ensure maximum surface area soil tamping. 600 mm and 165 kg/m. HD-Liner 600: the new heavy, high tamping capacity roller. The V-shape spreads the pressure out vertically and obliquely, for deep down tamping along the length of the roller. 600 mm and 180 kg/m in impact and wear resistant, treated steel. 7
CULTIMER L 1000 SIMPLE SETTINGS SPECIALLY FOR YOUR COMFORT 1 2 Simple machine depth adjustment by spacers 1 on the lift arms 2. For operating comfort, the machine is easy to handle on headlands and has a parallel lift system. Quick, easy levelling disc adjustment by crank handle. 3 Note: Depth control is possible by controlling the front wheels. 4 The drawbar 5 fl oats in this case and the machine can contour the ground more precisely. 3 4 5 COMFORT ON THE ROAD WITH SUSPENSION AND MECHANICAL LOCK SAFETY Compact machine, less than 3.00 in width and highly stable in transport. 8
OPTIONS THAT MAKE THE DIFFERENCE Front wheels for stabilizing or control depth. Quick, easy adjustment. A drawbar extension is available on request to obtain a steering angle of 110 with tractors fi tted with twin tyres. Cover crop seed drill. To optimize your stubble cultivation passage and seed your cover crops at the same time. SHs units have a capacity of between 200 and 400 litres for high on the job autonomy (available season 2015). 9
CULTIMER L 1000 MULTIPURPOSE EFFICIENT TINES SURFACE STUBBLE CULTIVATION: DUCK-FOOT SHARE This 350 mm share, is designed particularly for surface stubble cultivation. Even at limited depths (3 to 7 cm), is scalps the top soil. DEEP STUBBLE CULTIVATION: 80 MM TIPS AND 350 MM FINS Mounted as standard on the CULTIMER, this tip can be equipped with 2 side fi ns for stubble cultivation at a depth of 7-15 cm. Without the fi ns, this share can work down to 35 cm. INCREASED LONGEVITY: CARBIDE TIP AND FINS The lifespan of these parts is 5 times longer than for conventional parts thanks to their carbide plates: time and labour saving. The 50 mm tip is intended for deep soil restructuring (35 cm) with limited power requirement. LOW OPERATING COSTS LOW MAINTENANCE COSTS Our carbide wear parts (tips) are forged then treated. This makes them robust and extremely wear resistant. The grooves on the upper side fi ll with soil and reduce wear even further by the soil-soil contact. In addition, the carbide plates are positioned in 3 separate areas on the tip ensuring exceptional soil penetration on hard ground, reduced power requirement and a long life in terms of wear. Note: The carbide plates tuck under the tip to prevent them from detaching in stony conditions. 10 MAINTENANCE TIME SAVINGS The tines and the levelling disc hubs are maintenance-free to save you time.
Specifications Multipurpose stubble cultivator with tines CULTIMER L 4000 CULTIMER L 5000 CULTIMER L 6000 Min. tractor power (kw/hp) 120/160 150/200 180/240 Max. tractor power (kw/hp) 209/280 260/350 313/420 Working width (m) 4,00 5,00 6,00 Transport width (m) 2,82 Beam dimension (mm), 8 mm thick central beam 260 x 180, extension 120 x 80, tine support 100 x 100 Number of tines 13 16 19 Number of levelling discs option 10 12 14 Approx. weight (kg) with HD-Liner 600 mm roller 4300 5400 5900 Approx. weight (kg) with T-liner roller 4150 5200 5650 Linkage 3 and 4 standard Transport wheels 520/50-17 Suspension As standard Front control wheels As an option 340/55-16 Working depth setting 5 to 35 cm working depth, 10 km/h average speed Under beam clearance (cm) 85 Tip width with defl ector in mm (without fi ns) 80 Hydraulic adaptation lift: DA - folding: DA Breaks hydraulic as standard * KUHN SERVICES: ADVANTAGES TO GET MAXIMUM USE OUT OF YOUR MATERIAL AND MAXIMUM PROFITABILITY *Not all services are available in all countries. Get your part 24/7 You need a spare part fast. With KUHN sos order, you benefi t from express delivery 7 days a week, 362 days a year. Down-time is kept to a minimum and work output improved. For increasingly rapid repairs! An unexpected technical hitch always happens at the wrong time. With KUHN I TECH, your Authorized KUHN Partner, your problem will be fi xed in no time, and effectively. You ll get a rapid, accurate diagnosis with this on-line tool available 24/7. The professionals choice 36 months peace of mind with KUHN PROTECT+ warranty. You can concentrate on the job at hand and the performance of your machine. Because that s what you expect from investing in a high-tech machine. Rational investment! You need a new machine, but are unsure of fi nancing. Modernize your equipment and improve your farm with KUHN FINANCE according to your requirements in total security. We have custommade fi nance plans to meet your requirements. 11
CULTIMER L 4000 5000 6000 MULTIPURPOSE TO THE TIP OF THEIR TINES Farmers have different issues but common objectives: reducing the cost of crop establishment and high work output without compromising yield potential. The CULTIMER L was designed in order to offer you a multipurpose machine, quick and easy to adjust, to increase your work output and maintain the quality of your soil. STUBBLE CULTIVATOR RANGE OPTIMER+ HVA/DISCOVER DISCOLANDER CULTIMER PERFORMER Working width (m) 3 to 7,5 2,95 to 7 3,70 to 6 3 to 6 4 to 5 Transport width (m) 3 to 4 2,55 to 3 2,55 2,82 to 3,50 3 Number of discs or tines 24 to 60 discs 24 to 60 discs 32 to 52 discs 10 to 19 tines 14 to 18 tines Recommended working depth (cm) 3 to 10 5 to 18 5 to 18 5 to 35 10 to 35 Mounted or trailed version mounted and trailed trailed trailed mounted and trailed trailed Discover our KUHN range of disc and tine stubble cultivators 1 2 3 4 5 1. OPTIMER+ 2. DISCOVER 3. DISCOLANDER 4. CULTIMER 5. PERFORMER Find your closest authorized KUHN dealer on www.kuhn.com Find us on YouTube. Your Authorized Dealer KUHN S.A. 4 Impasse des Fabriques - BP 50060 - F-67706 Saverne CEDEX-France KUHN NORTH AMERICA, INC. 1501 West Seventh Avenue P.O BOX 167 - Brodhead, WI 53520 - USA KUHN FARM MACHINERY PTY. LTD 313-325 Foleys Road - Deer Park, 3023 Victoria - AUSTRALIA KUHN FARM MACHINERY (U.K.) LTD Stafford Park 7 - GB TELFORD/ SHROPS TF3 3BQ Certain machines are heavy. Keep to tractor s authorized load, its lift capacity, and max. axle load. The load on the tractor s front axle must always be a minimum of 20 % of empty tractor weight. In European Union countries, our material is conform to the European Machines Directive ; in other countries, it is in compliance with current safety regulations. In our prospectuses, for a clearer illustration of details, some safety systems have been removed. It is imperative that these safety systems be left in place in all circumstances, in compliance with the instructions notice. We reserve the right to modify, without notice, our models, equipment and accessories. The machines and equipment on this document may be patented and/or have a registered design. The brands cited in this document may be protected in one or several countries. To protect the environment, this leafl et is printed on chlorine-free paper. / Printed in France - 950 046 GB - 10.13 - Copyright 2013 KUHN www.kuhn.com Also find KUHN on