[Y] Acoustic Splitters with spigot ends/aerodynamically shapped for energy saving (Pressure drop reduction 25% to 30%)

Similar documents
Quiet-Duct Conic-Flow Silencers Section Specifications

to obtain the specified voids due

Circular silencers. Type CA. For the reduction of noise in circular ducts, galvanised sheet steel construction. 02/2017 DE/en PD CA 1

VAV Terminal Units SDS

SILENCERS. Contents. Page No. Features, Description, Sizes and Options. Performance Data. Submittal Data Request Sheet

Type MSA. Splitter thickness 200 mm FOR INCREASED INSERTION LOSS AND BROADBAND ATTENUATION EVEN IN THE LOW FREQUENCY RANGE

Circular Silencer. Rigid and flexible construction Type CA CB CF CS. TROX GmbH Telephone +49/28 45/ Telefax +49/28 45/

Parts and characteristics

Type TA-Silenzio FOR EXTRACT AIR SYSTEMS WITH DEMANDING ACOUSTIC REQUIREMENTS AND LOW AIRFLOW VELOCITIES

Homepage > Products > Control units > VARYCONTROL > Secondary silencer > Type TX. Type TX

Homepage > Products > Control units > VARYCONTROL > Secondary silencer > Type TX. Type TX

Type TA-Silenzio FOR EXTRACT AIR SYSTEMS WITH DEMANDING ACOUSTIC REQUIREMENTS AND LOW AIRFLOW VELOCITIES

Technical documentation

ULTRA LOW ENERGY. VHR Void Series W/I/s TOTAL SFP Typical. Made in the UK. VHR Void Mounted Heat Recovery Units VHR PERFORMANCE OVERVIEW:

Type TVZ. VAV terminal units for the supply air control in buildings with variable air volume systems and demanding acoustic requirements

Type TVA FOR EXTRACT AIR SYSTEMS WITH DEMANDING ACOUSTIC REQUIREMENTS

CONSTANTFLOW Volume Flow Controllers

VARYCONTROL VAV Dual Duct Terminal Boxes

Type TVA FOR EXTRACT AIR SYSTEMS WITH DEMANDING ACOUSTIC REQUIREMENTS

HOTCHKISS AIR ACOUSTICS

Sound attenuators. Sound attenuators, Sound attenuating louvres. Sound attenuators. Rectangular sound attenuators DZ-2, DZ-3

Circular silencers. Type CS. For the reduction of noise in circular ducts, aluminium construction PD CS 1. 02/2017 DE/en

Type CA FOR THE REDUCTION OF NOISE IN CIRCULAR DUCTS, GALVANISED SHEET STEEL CONSTRUCTION

VAV terminal units. Type TVM. For dual duct systems PD TVM 1

Type CA FOR THE REDUCTION OF NOISE IN CIRCULAR DUCTS, GALVANISED SHEET STEEL CONSTRUCTION

Technical information

CAV controllers. Type EN. For the precise control of normal and high constant volume flows. 01/2017 DE/en PD EN 1

Air diffuser system Model AUDIX -AW

SERENO

COLIBRI Ceiling QUICK FACTS. Square ceiling diffuser with discs for supply air

CAV controllers. Type VFL. Volume flow limiter for insertion into ducting PD VFL 1

CAV controllers. Type EN-Ex. For the precise control of normal and high constant volume flows in potentially explosive atmospheres (ATEX)

Air distribution product

Type RN FOR THE PRECISE CONTROL OF CONSTANT VOLUME FLOW RATES. Homepage > Products > Control units > Constant volume flow control CONSTANTFLOW

JVR CONTENTS. Page Introduction 2 Models and dimensions 3 Technical data. Selection tables 4 Technical data. Selection charts 5 Product codes 6

Rectangular inlet air diffuser

Type TVT FOR NORMAL AND HIGH VOLUME FLOW RATE RANGES AND LOW-LEAKAGE SHUT-OFF

Heat exchanger. Type WL. For the reheating of airflows in circular ducting PD WL 1. 03/2017 DE/en

ALD. Sound attenuating exterior wall grille QUICK FACTS. Excellent noise attenuation A robust grille that withstands severe climatic conditions

CADENZA. Sound attenuator with tapered acoustic baffles for rectangular ducts QUICK FACTS

Regulation and shut-off damper SPB and SPC

VAV terminal units. Type TVA. For extract air systems with demanding acoustic requi rements K

Type RN FOR THE PRECISE CONTROL OF CONSTANT VOLUME FLOW RATES. Homepage > Products > Control units > Constant volume flow control CONSTANTFLOW

Type CS FOR THE REDUCTION OF NOISE IN CIRCULAR DUCTS, ALUMINIUM CONSTRUCTION

VAV TERMINAL BOXES TYPE: BA BT

1/8/EN/6. Floor Diffusers. Type FB. in aluminium and plastic

Highline 260i EC Waterside Fan Coil Unit

TBV - Terminal Unit. Halton TBV. Terminal Unit

Content - Silencers. Silencers for spiral systems. Silencers for rectangular systems

Accessories. Front vane panel Coupling sleeve with gasket Galvanised steel Gasket of rubber compound

Extract-air grille with ATK plenum box

RETROFIT TERMINAL UNITS

VAV terminal units. Type TVZ. For supply air systems with demanding acoustic requirements PD TVZ 1

Pressure control damper ERPA

CAV controllers Type RN

Rectangular Silencer. Cylindrical Duct Silencer. and. Acoustic Louvres BUILDING SERVICES, INDUSTRIAL NOISE CONTROL SYSTEMS AND PRODUCTS

INDEX. Chapter3. air master. Linear Bar Grilles

MOTORIZED VOLUME DAMPER

Type TVR FOR THE MOST DIVERSE APPLICATIONS REGARDING STANDARD VOLUME FLOW RATE RANGES

BACKWARD CURVE CENTRIFUGAL FANS KABB / KABT Series

AL-Maraj Central A/C Systems Accessories Mfg Co.

Ceiling swirl diffusers with perforated face plate

CAV controllers. Type RN. For the precise control of constant volume flow rates PD RN 1

SILENCER SELECTION INSTRUCTIONS

CAV controllers. Type RN-Ex. For the precise control of constant volume flows in potentially explosive atmospheres (ATEX) PD RN-Ex 1

LINEAR SLOT DIFFUSERS

SP Standard Profile. In Duct or Flanged to Duct Install Types OPPOSED ACTION PARALLEL ACTION. Extended Rear Flange Install Type

NR series. Circular CAV air volume control terminals with system powered mechanical regulator

DFA - Conical Ceiling Diffuser. Halton DFA. Conical Ceiling Diffuser

SILENCER SELECTION INSTRUCTIONS

Mechanical mixing box MBM

Circular Box Fans - DAISHO EC Range DAISHO EC 125. Features. Electrical Supply. Product Code. Sizes 125, 150, 200, 250, 315, 450, 630 and 1000.

AIRODYNE CATALOGUE VOLUME CONTROL TAMPERS CONSTRUCTION / MATERIALS

series Silencers

Slot diffusers for ceiling installation

LINEAR SLOT DUFFUSERS

EX C E L L E N C E ISO 9001 CERTIFIED COMPANY LINEAR BAR GRILLES.

CAV controllers. Type VFL. Volume flow limiter for insertion into ducting K

INDEX. Chapter1 1. A. Jet diffusers 1. Jet diffuser...: AJD-P

VOLUME CONTROL & SHUT OFF DAMPERS SERIES 400

RN-S: 80, 100, 125 RN: 80, 100, 125, 160, 200, 250, 315, 400 RN-FL: 100, 125, 160, 200, 250, 315, 400

Type VSD35. Nominal length up to 1500 mm: one spigot

For installation into ductwork

Optima EXHAUST GRILL AND AIR LOUVER. Perforated Ceiling Diffusers. Features: Standard square sizes:

Novenco Tunnel Fans. Novax October 2007

PELICAN Ceiling. Square ceiling air diffuser for supply air and extract air QUICK FACTS

Sound attenuators, Sound attenuating louvres

THB - Perforated Ceiling Diffuser. Halton THB. Perforated Ceiling Diffuser

C O L M A N. Air Distribution LINEAR SLOT DIFFUSERS CD SERIES SERIES

VANEAXIAL & TUBEAXIAL FANS

VAV TERMINAL UNIT KYODO-ALLIED TECHNOLOGY PTE LTD

C O L M A N. Air Distribution LINEAR SLOT DIFFUSERS CE SERIES SERIES

THE WORLD S FASTEST DUCTING

Mufflers. Absorptive, Reactive, Reactive Lined, Reactive Side Entry, Reactive Side Entry Lined

LINE SILENCER. Copyright 2009 by PULSCO Incorporated. All rights reserved. Reproduction without permission is prohibited.

Type DCS FOR HORIZONTAL SWIRLING SUPPLY AIR DISCHARGE CREATING HIGH INDUCTION LEVELS, WITH FIXED AIR CONTROL BLADES

New products. The plastic silencer AGP The new standard

Industrial Generator Set Accessories

Casing Hot galvanised steel / Option: stainless steel EN (AISI316L) Reheat coil EN (AISI 304)

LINEAR BAR GRILLES T SERIES. Quality and e!ciency without compromise

Transcription:

SLK series Splitter Attenuators Rectangular duct attenuator constructed from galvanised sheet steel, with splitter type acoustic elements. Provided with 20, 30 or 40 mm profile flanges, which are compatible with flanging systems. Acoustic Splitters with spigot ends( up to certain sizes if required). Materials Outer casing -Outer casings of standard rectangular straight silencers shall be made of not less than 1,0 mm; lock former quality galvanized steel, [or 316/304 stainless steel, aluminum]. Acoustic Splitters/Baffles -Splitters shall be made of not less than 0,6 mm properly stiffened to ensure structural integrity; lock form quality, galvanized steel, [or 316/304 stainless steel, aluminum. - Acoustically absorptive material of a proper density to obtain the specified acoustic performance and be packed under not less than 5% compression to eliminate voids due to vibration and settling.material shall be with laminated non-woven glass fibre fabric to provide protection against abrasion at air velocities of up to 20 m/s- Highly bio-degradable, no health risk; moisture-repellent; rot-proof impregnation and nonflammable. Fire class A1 Option selection [Y] Acoustic Splitters with spigot ends/aerodynamically shapped for energy saving (Pressure drop reduction 25% to 30%) Standard Construction Codes standard Splitter Optional models code SLK SLK1-40 [Y] SLK1-50 [Y] order example SLK1-75 [Y] SLK1-40-1400/1000/1250-[Y] SLK1-100 [Y] codes explained: SLK SLK2-50 [Y] SLK1-40 - Sound attenuator model type SLK2-100 [Y] 1400/1000/1250 - Dimensions - Widht/Height/Length SLK2-150 [Y] Optional code [Y]- Aerodynamically shapped splitters SLK2-200 [Y] SLK SLK3-100 [Y] SLK3-150 [Y] SLK3-200 [Y] SLK3-300 [Y]

MODEL SLK1-40 maximum (mm) Lenghts SLK1-40 140 100 2380 2100 500 to 4800 1000 8 9 20 34 47 49 46 35 1250 10 11 24 40 50 49 50 40 1500 12 12 29 46 50 49 50 44 1800 14 15 34 50 50 49 50 50 2000 14 16 37 50 50 49 50 50 2400 16 19 44 50 50 49 50 50 3000 20 23 50 50 50 49 50 50 MODEL SLK1-50 SLK1-50 150 100 2400 2100 500 to 4800 1000 8 9 18 32 45 47 41 31 1250 10 10 23 37 49 49 45 36 1500 12 11 26 43 50 49 50 29 1800 14 13 31 50 50 49 50 46 2000 14 14 34 50 50 49 50 49 2400 16 17 40 50 50 49 50 50 3000 20 20 50 50 50 49 50 50

MODEL SLK1-75 SLK1-75 175 100 2450 2100 500 to 4800 1000 7 6 13 24 43 45 35 24 1250 9 7 14 28 48 50 39 29 1500 9 7 17 34 50 50 44 33 1800 11 8 21 39 50 50 50 39 2000 11 9 23 42 50 50 50 40 2400 12 11 29 50 50 50 50 46 3000 16 13 35 50 50 50 50 50 MODEL SLK1-100 SLK1-100 200 100 2400 2100 500 to 4800 1000 3 3 10 25 40 40 28 17 1250 3 4 14 30 45 46 33 19 1500 3 4 16 34 50 50 39 22 1800 4 5 20 40 50 50 45 27 2000 4 6 22 44 50 50 49 29 2400 5 5 24 50 50 50 50 34 3000 6 7 30 50 50 50 50 42

MODEL SLK2-50 SLK2-50 250 200 2500 2100 500 to 4800 1000 12 14 27 47 50 50 46 36 1250 14 17 33 50 50 50 50 40 1500 16 20 39 50 50 50 50 44 1800 18 25 46 50 50 50 50 50 2000 20 27 50 50 50 50 50 50 2400 24 33 50 50 50 50 50 50 3000 30 41 50 50 50 50 50 50 MODEL SLK2-100 SLK2-100 300 200 2400 2100 500 to 4800 1000 6 8 19 35 46 44 30 22 1250 8 10 23 43 50 50 35 25 1500 10 12 28 50 50 50 41 28 1800 12 14 33 50 50 50 47 30 2000 12 16 35 50 50 50 50 33 2400 14 20 41 50 50 50 50 36 3000 16 25 49 50 50 50 50 41

MODEL SLK2-150 SLK2-150 350 200 2450 2100 500 to 4800 1000 5 6 15 30 39 30 19 13 1250 5 7 19 37 46 34 21 15 1500 7 9 23 44 50 40 25 16 1800 7 10 27 50 50 46 27 18 2000 9 11 30 50 50 50 30 18 2400 8 14 33 50 50 50 34 21 3000 10 17 38 50 50 50 39 23 MODEL SLK2-200 SLK2-200 400 200 2400 2100 500 to 4800 1000 6 4 12 26 31 20 12 9 1250 9 5 15 31 37 24 13 10 1500 9 6 17 36 43 27 15 10 1800 9 7 20 43 50 32 17 12 2000 13 8 22 48 50 34 19 13 2400 12 9 24 50 50 38 20 14 3000 15 10 28 50 50 46 23 15

MODEL SLK3-100 SLK3-100 400 300 2400 2100 500 to 4800 1000 8 12 27 44 41 45 33 25 1250 10 14 32 43 47 50 37 28 1500 12 17 37 47 50 50 42 29 1800 14 20 43 50 50 50 47 32 2000 14 21 47 50 50 50 50 33 2400 16 25 50 50 50 50 50 37 3000 20 31 50 50 50 50 50 41 MODEL SLK3-150 SLK3-150 450 300 2250 2100 500 to 4800 1000 6 9 23 30 34 32 22 15 1250 6 12 28 35 40 38 25 17 1500 6 14 32 40 46 45 27 18 1800 8 16 38 48 50 50 31 19 2000 8 18 41 50 50 50 33 21 2400 10 22 48 50 50 50 38 23 3000 12 27 50 50 50 50 44 28

MODEL SLK3-200 SLK3-200 500 300 2500 2100 500 to 4800 1000 4 8 19 24 26 22 16 11 1250 4 9 23 28 30 27 17 12 1500 6 11 28 33 35 30 20 12 1800 6 13 32 38 40 35 22 14 2000 8 15 35 42 44 38 23 15 2400 8 17 42 49 50 44 26 17 3000 10 22 50 50 50 50 30 18 MODEL SLK3-300 SLK3-300 600 300 2400 2100 500 to 4800 1000 4 6 15 18 16 13 9 7 1250 4 7 19 21 20 14 10 7 1500 4 8 23 24 24 16 12 8 1800 6 10 27 28 28 19 12 8 2000 6 11 29 31 30 20 13 8 2400 8 13 34 36 36 22 14 8 3000 8 16 43 45 43 27 17 10