I ELECTRIC DRIVE CONTENT OF DELIVERY: 1. HP-400 L chipper with crusher option - included the body of crusher - hydraulic cylinder for opening the fly-wheel lock - manual hydraulic pump - central lubrication for the bearings of chipper and crusher - expansible for the bearings of feed conveyor 2. Main gear drive NordGear - n 2 =90 rpm 3. Flexible clutch between gear box and electric motor 4. Electric motor 250kW/1500 rpm 5. Main electric box, included: max 630A - the main power switch and maintenance switch - start up equipment for main electric motor - the frequency variable for sharpening use - space option for equipment of the crusher max 45kW - space option for equipment of three conveyors 6. Gearbox for sharpening use - the blade rotation with variable frequency drive 7. The sharpening machine for blade sharpening 2300W/230V - included the guide rails and the fastening equipment for the sharpening machine 8. Steel platform frame for the chipper and the power source 9. The measures of the screw chipper unit: - Weight 8500 kg - Lengthen 4500 mm, (not included platforms for maintenance) - Width 2150 mm, (not included platforms for maintenance) - High 2200 mm, (height with opened fly-wheel lock 3150mm)
II DIESEL DRIVE CONTENT OF DELIVERY, STATIONARY USE: 1. HP-400 L chipper ready for crusher - included body of crusher - hydraulic cylinder for open the fly-wheel lock - manual hydraulic pump - central lubrication for the chipper bearings and the crusher - expansible for the bearings of feed conveyor 2. Main gear drive NordGear - n 2 =90 rpm 3. Flexible clutch between gear box and primary shaft 4. Primary shaft 5. Cardan shaft between primary shaft and hydraulic clutch 6. Hydraulic clutch Twin Disc - transmission 1.15:1 - electronically contact coupling - power output for hydraulic pump (SAE B 2 screw coupling) 7. John Deere 6135 HF 485 diesel engine - 6-sylinder - max effective 336 kw 2100rpm (in use may be adjusted ~ 1700 rpm) - certificated stage III A 8. Gearbox for sharpening use - the blade rotation with variable frequency drive 9. The sharpening machine for blade sharpening 2300W/230V - included the guide rails and the fastening equipment for the sharpening machine 10. Steel frame - Lengthen 60000 mm - Width 1330 mm - High 400 mm
11. The measures of the screw chipper unit: - Weight 8700 kg, (with crusher 97000 kg ) - Lengthen 6000 mm, (not included platforms for maintenance) - Width 2150 mm, (not included platforms for maintenance) - High 2200 mm, (height with opened fly-wheel lock 3150mm) - Screw chipper HP-400 L basic unit not included - fuel tank - engine coat - platforms for maintenance - It is possible to use the same feeding and exhaust conveyor with diesel unit and with electric unit CONTENT OF DELIVERY, MOBILE USE: 1. Basic content of delivery in mobile use is the same as static unit, but the chipper is installed on the trailer and can be used with crane Loglift 165 ZT 2. The measures of the screw chipper mobile unit: - Weight 9000 kg (with crusher 10000 kg ) - Weight 11800 kg (with crusher and crane) - Lengthen 6500 mm - Width 2150 mm, (with crane 2500 mm) - High 2200 mm, (with crane 2740 mm)
III TECHNICAL DETAILS Type Chip Production Feed opening Feed rate Rate of rotation Laimet HP-400 L up to 165 m 3 per hour 400 X 500 mm app. 0,2 0,4 m/s nominal app. 100 110 rpm Electric drive: - parallel shaft geared motor: ECO-LINE250kW/400/690V - delta-star starter, installed in to the IP55 starter box - requires the fuses of app. 630 A Diesel drive John Deere 6135 HF 485 diesel engine - 6 cylinder - max effective 336 kw 2100rpm - certificated stage III A - Includes as standard: - the central lubrication for the chipper bearings - one conical screw spiral 2/220 installed - the feeding chute for the conveyor of 500 mm - the hydraulic pump for open the flywheel lock - the sharpening machine (the angle grinder 200W / 230 mm disc) - the frequency inverter to rotate the spiral slowly for the grinding service
IV HP-400 L electric model HP-400 L with central lubrication and the hydraulic pump for open the fly-wheel lock