General Applications Axle Types 300-000 Lbs. Capacity Complete service manual Precision machined steel spindles and integral cast iron hub/drums Press-in wheel studs " x ¹ ₂" and " x ¹ ₄" CSA approved electric brakes, CSA approved uni-servo and free backing hydraulic brakes Electric and hydraulic brakes are available with and without parking feature Hydraulic free backing brakes available Hydraulic disc brakes available Standard grease lubrication; E-Z Lube option Inner wiring system for easier installation and protection of brake wiring d30 & D35 leaf spring F L Totally rubber-cushioned for smooth, quiet, independent ride Easy installation with less maintenance Less transfer of road shock which insulates cargo from road shocks and vibration Rubber cords compounded for maximum dependability and durability Load-carrying cross member Self-damping action Independent wheel suspension system 5 year limited warranty on suspension system Low profile for maximum road clearance Various starting angles to control trailer height High and low profile brackets with optional mounting brackets available Rubber cushioning eliminates metal-to-metal contact Shock absorption provided by the natural hysteresis of rubber Single or tandem axle assemblies Durable, wear-resistant components Straight or Drop spindles (3") D30 Straight or Drop spindles (" and " drop) D35 High strength ³ ₈" diameter tube High quality alloy steel springs in a variety of capacities Single, tandem, or triple axle assemblies with equalized suspensions Slipper spring or double eye leaf spring suspension Optional hanger and attaching parts kits available Durable, wear-resistant components year limited warranty CAUTION: Triple axle assemblies are NOT recommended for #, #F and #L Torflex axles.
Torflex Application Information Start Angle 5 Down 3 Down.5 Down Down 0 Up.5 Up F racket Profile F L Articulation Dimensions Dimensions are for top mount only. Side mount is." higher. Allow 3" bump clearance from full load. Forward No Load Full Load Shock Load H L H L H L Low 5.3. 3. 5.5. 5. High.55.. 5.5 3. 5. Low. 5.0. 5..3.00 High 5. 5.0 3.30 5..3.00 Low 3. 5.5..00 0.3 5. High. 5.5.3.00. 5. Low.53 5. 0. 5. -0.3 5. High 3.35 5..0 5. -0. 5. Low..00-0. 5.5 -.. High.3.00 0.0 5.5 -.0. Low 0.5 5. -.3 5.0 -..33 High. 5. -0. 5.0 -..33 Low -0. 5.5 -.5. -3.50 3.33 High 0.0 5.5 -.3. -. 3.33 L Left Hand Assembly Shown DEXTER Arm Length Axle Location L Note: Positive numbers in the H column indicate the spindle is ELOW the top of the bracket. Conversely, negative numbers are AOVE the top of the bracket. Full Load Dimensions Dimensions are for low profile, top mount only. High profile brackets are." higher. Side mount is." higher. Allow 3" bump clearance from full load. H Top of racket Center of Spindle Start Angle Overhang Per Side Spindle Min. Max. Max. Capacity # Standard w/drum.30".0" 3500 # w/disc rake.5".0" 3500 #F w/drum.30".50" 000 #L w/drum 5." 3." 3000 C Top of racket H E D C Top of racket H E D Dn, 0, Up,.5 Up.5 Dn, 5 DN Start Angle * * * 5 Down.5 Down Down 0 Up.5 Up Tire D E H C H C H C H C H C H C ST5/0R3..0 3. 5.0..5..5 0... -0... -..5 3. -... ST05/5R. 3. 3. 5..3.5 3.. 0..3. -0..3 3. -... -..3 5. ST5/5R5 3.0. 3....5.5. 0. 3.. -0.. 5. -..3. -... Columns D and E are dimensional examples only: * D Static Loaded Radius ** E Inflated Radius 0
Torflex Application Information F L racket Dimensions Forward For Wiring Access olt Size J A G Right Hand Side of Axle Shown C A E D Low Profile F / G Side Mount Hanger # racket Dimensions Low High A.00.00.50.50 C.00.00 D.00.00 E.00.00 F 3.3.5 G.50.50 J.. N ----.03 P ----.00 Q ----.00 olt Size ⁵ ₈" bolt Tube Size.. P E F High Profile N Q
Leaf Spring Application Information Double Eye Springs For Standard 33" Axle Spacing Single A/P--00 Tandem A/P-33-00 Triple A/P-335-00 Spring Length " " " A. 3.50 5.5 5.00.50.50 C.5 3.00 33.00 D..00 3.00 E.5 3.00 33.00 For Optional 35" Axle Spacing Tandem A/P--00 Triple A/P-3-00 Spring Length " " ".00.50 30.50 C 30.0 33.00 35.00 D..00 3.00 E 30.0 33.00 35.00 D35 Overhang Per Side Min. Disc* Max. Straight 5.".5".00" " Drop.00".5".00" " Drop.".".00" 3" Dia. Straight 5.".5".50" 3" Dia. Drop.00".5".50" * Minimum overhang with disc brakes D30 Overhang Per Side Min. Max. Straight 5.3".00" 3" Drop.00".00" Z Y SLR Forward H Z Y SLR D E H Z Y SLR C D A H D C C Double Eye Axle Assemblies Hanger Kits Quantity Per Kit Part No. Description Height HGR--00 HGR-5-00 HGR--00 HGR--00 HGR-3-00 0-005-00 Hanger 3.5" ---- 0-00-00 Front Hanger." ---- ---- ---- ---- 0-00-00 Front Hanger.0" ---- ---- ---- ---- 0-03-00 Center Hanger 3." ---- ---- ---- 030-00-00 Rear Hanger." ---- ---- ---- Attaching Parts Kits Part No. Description A/P--00 A/P-33-00 A/P--00 A/P-335-00 A/P-3-00 00-0-0 Flange Locknut 00--00 Shackle olt 03--0 Equalizer ---- ---- ---- 03-5-0 Equalizer ---- ---- ---- ---- 03--0 Equalizer ---- ---- ---- 03--0 Equalizer ---- ---- ---- ---- 0-0-00 Shackle Link ---- 0-0-00 Shackle Link, Long ---- ---- ---- ---- 0-00-00 Shackle Link Assembly ---- 0-0-00 Shackle Link Assembly, Long ---- ---- ---- ---- For 35" axle spacing using " springs
Leaf Spring Application Information Z Y Z Y Z Y SLR SLR SLR D D A H H H C Forward E Slipper Springs Single Tandem Triple A/P-3-00 A/P-0-00 A/P--00 A/P-30-00 A/P-3-00 A.0 ---- ---- ---- ---- ----. 30.. 30. C ---- 33.5 3.0 33.5 3.0 D.5.5.5.5.5 E ---- ---- ---- 33.0 35.0 Note: All " wide slipper springs For 33.5" axle spacing For 3" axle spacing A,, E Hanger Spacing C Axle Spacing D Axle Location H Center of Spindle Y Frame Height Z Top of Tire to ottom of Frame SLR Static Load Radius To determine these values, contact your local sales engineer or distributor to run ProSpec. D C E Slipper Spring Axle Assemblies Hanger Kits Quantity Per Kit Part No. Description Height HGR--00 HGR-0-00 HGR-30-00 0-00-00 Front Hanger.5" 0-00-00 Center Hanger 3.50" ---- 030-0-00 Rear Hanger.00" Attaching Parts Kits Part No. Description A/P-3-00 A/P-0-00 A/P--00 A/P-30-00 A/P-3-00 00-00-0 ⁹ ₁₆- Locknut 00-0-00 Keeper Nut 00--00 Equalizer Nut ---- 00-00-0 Equalizer olt ---- 00-00-00 Keeper olt 00-0-00 Spring Eye olt 03-00-00 Equalizer ---- ---- ---- 03-0-0 Equalizer ---- ---- ---- For 33.5" axle spacing For 3" axle spacing Some combinations of hangers and spring mountings may result in insufficient bump clearance. Refer to the Miscellaneous section for additional hanger kits, A/P kits, or other tires. 3
D30 and #L 55 Hub Group ExpD30_-3 3 0 5 3 A Grease Lube Parts 0-0-00 Grease Seal for E-Z Lube 03-03-0 LM0 Inner earing Cone 3 03-03-0 LM0 Inner earing Cup 03-03-0 L Outer earing Cup 5 03-03-0 L Outer earing Cone 00--00 Spindle Nut 0-00-00 Cotter Pin 0-003-00 Grease Cap A 0-0-0 Grease Cap for E-Z Lube 05-00-00 Rubber Plug for E-Z Lube 005-03-00 Spindle Washer 00--00 Special Jam Nut for E-Z Lube (after 00) 00-0-00 Spindle Nut Retainer for E-Z Lube (after 00) Hubs olt Circle Hubs and Drums 00--0 ½" Stud 5 on.50 Studs & Wheel Nuts 00-5-00 ½-0 Pressed Wheel Stud 3 00-00-00 ½-0 0 Cone Nut " x ¹ ₂" rakes 0 0 K3--00/K3-3-00 K3--00/K3--00 LH/RH Electric LH/RH Nev-R-Adjust Note: Spindle is not available for resale.
D35, # 55 and Other Hub Group ExpD35_-3 3 5 0 5 3 A Grease Lube Parts 0-0-00 Grease Seal for E-Z Lube 03-033-0 L Inner earing Cone 3 03-033-0 L Inner earing Cup 03-03-0 L Outer earing Cup 5 03-03-0 L Outer earing Cone 00--00 Spindle Nut 0-00-00 Cotter Pin 0-003-00 Grease Cap A 0-0-0 Grease Cap for E-Z Lube 05-00-00 Rubber Plug for E-Z Lube 005-03-00 Spindle Washer 00--00 Special Jam Nut for E-Z Lube (after 00) 00-0-00 Spindle Nut Retainer for E-Z Lube (after 00) " x ¹ ₄" rakes ns K3--00/K3--00 LH/RH Electric Nev-R-Adjust 0 K3-0-00/K3-0-00 LH/RH Electric ns K3-0-00/K3-0-00 LH/RH Electric w/park ns K3-3-00/K3-33-00 LH/RH Hydraulic Uni-servo ns K3-330-00/K3-33-00 LH/RH Hydraulic Uni-servo w/park ns K3-3-00/K3-3-00 LH/RH Hydraulic Duo-servo ns K3-00-00/K3-0-00 LH/RH Hydraulic Duo-servo w/park ns K3-3-00/K3-35-00 LH/RH Hydraulic Free acking ns K3-3-0/K3-35-0 LH/RH Hydraulic F Corrosion Resistant ns - not shown Note: Spindle is not available for resale. Hubs olt Circle Hubs and Drums 00--05 ½" Stud 5 on.50 00--0 ½" Stud 5 on 5.00 00--05 ½" Stud 5 on 5.50 00-- ½" Stud 5 on.5 00-50-05 ½" Stud on 5.50 Plain Hubs 5 00--05 ½" Stud 5 on.50 5 00-- ½" Stud 5 on.5 5 00-5-0 ½" Stud 5 on 5.00 5 00-5-05 ½" Stud 5 on 5.50 00-5-05 ½" Stud on 5.50 Studs & Wheel Nuts 00--00 ½-0 Pressed Wheel Stud 3 00-00-00 ½-0 0 Cone Nut 5
#F 55 Hub Group Exp00_-3 3 0 5 A Grease Lube Parts 0-0-00 Grease Seal for E-Z Lube 03-033-0 L Inner earing Cone 3 03-033-0 L Inner earing Cup 03-03-0 L Outer earing Cup 5 03-03-0 L Outer earing Cone 00--00 Spindle Nut 0-00-00 Cotter Pin (not used with E-Z Lube ) 0-00-00 Grease Cap A 0-0-0 Grease Cap for E-Z Lube 05-00-00 Rubber Plug for E-Z Lube 005-03-00 Spindle Washer 00--00 Special Jam Nut for E-Z Lube (after 00) 00-0-00 Spindle Nut Retainer for E-Z Lube (after 00) Hubs olt Circle Hubs and Drums 00--05 ½" Stud 5 on.50 Studs & Wheel Nuts 00--00 ½-0 Pressed Wheel Stud 00-00-00 ½-0 0 Cone Nut " x ¹ ₄" rakes 0 K3--00 LH Electric 0 K3-3-00 RH Electric ns K3--00 LH Electric Nev-R-Adjust ns K3--00 RH Electric Nev-R-Adjust ns - not shown Note: Spindle is not available for resale.
55 Nev-R-Lube Hub Group Service Parts Only Exp3500nvr_3-0 3 3 5 Nev-R-Lube Parts 35MM 3 005-50-00 Spindle Washer 00-3-00 Spindle Nut 5 0-00-00 Washer, Torque Label 0-0-00 Snap Ring 0-0-00* Grease Cap " x ¹ ₄" rakes ns K3--00/K3--00 LH/RH Electric Nev-R-Adjust 0 K3-0-00/K3-0-00 LH/RH Electric ns K3-0-00/K3-0-00 LH/RH Electric w/park ns K3-3-00/K3-33-00 LH/RH Hydraulic Uni-servo ns K3-330-00/K3-33-00 LH/RH Hydraulic Uni-servo w/park ns K3-3-00/K3-3-00 LH/RH Hydraulic Duo-servo ns K3-00-00/K3-0-00 LH/RH Hydraulic Duo-servo w/park ns K3-3-00/K3-35-00 LH/RH Hydraulic Free acking ns K3-3-0/K3-35-0 LH/RH Hydraulic F Corrosion Resistant ns - not shown Note: Spindle is not available for resale. Hubs With earing & Wheel Studs olt Circle 00-3-0* Hub and Drum includes: on 5.50 00-5-00 ¹ ₂-0 Press-in Stud 03-0-03* 35mm Cartridge earing 0-0-00* earing Retainer Wheel Nuts 3 00-00-00 ½-0 0 Cone Nut * Available for service parts only.
D30, #L " x ¹ ₂" Electric rake 3 XE_- CSA approved at 3000#/. SLR 3 5 Electric rake Item Part No. Qty/rk Description 0 K3--00 LH Complete rake Assembly (shown) 0 K3-3-00 RH Complete rake Assembly 03-3-03 acking Plate Assembly 0-0-05 LH Actuating Lever Arm 0-00-05 RH Actuating Lever Arm 3 005-0-00 Washer 0-005-00 Wire Clip 5 0-00-00 Retractor Spring K-0-00 Shoe & Lining Kit Contains: #035-00-00 Shoe Hold Down Cup #00--00 Primary Shoe & Lining #00-30-00 Secondary Shoe & Lining #0-00-00 Shoe Hold Down Spring #0-00-00 Shoe Hold Down Pin *T* 03-00-00 Adjuster Assembly 0-0-00 Adjusting Screw Spring K--00 Magnet Kit Contains: #0-0-00 Magnet (green wire) #0-00-00 Magnet Clip #0-00-00 Magnet Spring 0-00-00 Adjuster Slot Plug 0-0-00 Wire Grommet 00-0-00 rake Mounting olt - Press-in *3 00-0-00 rake Mounting Nut * Not included with complete brake assembly. Item sold separately.
D30, #L " x ¹ ₂" Nev-R-Adjust Electric rake xe_d_nev-r-adj_- CSA approved at 3000#/. SLR 3 5 Electric rake Item Part No. Qty/rk Description 0 K3--00 LH Complete rake Assembly (shown) 0 K3--00 RH Complete rake Assembly 03-0- acking Plate Assembly 0-0- LH Actuating Lever Arm 0-00- RH Actuating Lever Arm 3 005-0-00 Washer 0-005-00 Wire Clip 5 0-00-00 Retractor Spring K-0-00 LH Shoe & Lining Kit Contains: #00--00 Primary Shoe & Lining #00-35-00 Secondary Shoe & Lining #0-00-00 Shoe Hold Down Pin T #0-00-00 Shoe Hold Down Spring K-0-00 RH Shoe & Lining Kit Contains: #00--00 Primary Shoe & Lining #00-3-00 Secondary Shoe & Lining #0-00-00 Shoe Hold Down Pin T #035-00-00 Shoe Hold Down Spring & Cup K-03-00 LH & RH rake Adjuster Kit Contains: #0-3-00 Adjusting Screw Spring #0-0-00 LH Lever Spring #0--00 RH Lever Spring #0-0-00 LH Adjuster Assembly #0-03-00 RH Adjuster Assembly #0-5-00 Hook for Cable #0-53-0 LH Adjusting Lever #0-53-0 RH Adjusting Lever #0-533-00 Adjuster Cable #0-55-0 LH Cable Lever #0-55-0 RH Cable Lever #0-5-00 Adjuster Cable K--00 Magnet Kit Contains: #0-0-00 Magnet (green wire) #0-00-00 Magnet Clip #0-00-00 Magnet Spring 0-00-00 Adjuster Slot Plug 0-0-00 Wire Grommet 00-0-00 rake Mounting olt - Press-in * 00-0-00 rake Mounting Nut * Not included with complete brake assembly. Item sold separately.
D35, # " x ¹ ₄" Electric rake 3 XE_- CSA approved at 3500#/3.3 SLR 3 5 Electric rake Item Part No. Qty/rk Description 0 K3-0-00 LH Complete rake Assembly (shown) 0 K3-0-00 RH Complete rake Assembly 03-0- acking Plate Assembly 0-0-05 LH Actuating Lever Arm 0-00-05 RH Actuating Lever Arm 3 005-0-00 Washer 0-005-00 Wire Clip 5 0-00-00 Retractor Spring K-0-00 Shoe & Lining Kit Contains: #00-0-00 Primary Shoe & Lining #00-0-00 Secondary Shoe & Lining #0-00-00 Shoe Hold Down Pin # #0-0-00 Shoe Hold Down Spring & Cup 03-00-00 Adjuster Assembly 0-0-00 Adjusting Screw Spring K--00 Magnet Kit Contains: #0-0-00 Magnet (green wire) #0-00-00 Magnet Clip #0-00-00 Magnet Spring 0-00-00 Adjuster Slot Plug 0-0-00 Wire Grommet 00-0-00 rake Mounting olt - Press-in *3 00-0-00 rake Mounting Nut * Not included with complete brake assembly. Item sold separately. 30
D35, # " x ¹ ₄" Electric rake With Parking Feature 5 3 XEPF_- CSA approved at 3500#/3.3 SLR 3 Electric Parking rake Item Part No. Qty/rk Description 0 K3-0-00 LH Complete rake Assembly (shown) 0 K3-0-00 RH Complete rake Assembly 0-0-05 LH Actuating Lever Arm 0-00-05 RH Actuating Lever Arm 0-005-00 3 Wire Clip K-0-00 Shoe & Lining Kit Contains: #00-0-00 Primary Shoe & Lining #00-0-00 Secondary Shoe & Lining #0-00-00 Shoe Hold Down Pin # #0-0-00 Shoe Hold Down Spring & Cup 03-00-00 Adjuster Assembly 0-0-00 Adjusting Screw Spring K--00 Magnet Kit Contains: #0-0-00 Magnet (green wire) #0-00-00 Magnet Clip #0-00-00 Magnet Spring 0-00-00 Adjuster Slot Plug 0-0-00 Wire Grommet 00-0-00 rake Mounting olt - Press-in *3 00-0-00 rake Mounting Nut 03-0-0 LH acking Plate Assembly (includes items #, -) 03-0-0 RH acking Plate Assembly (includes items #, -) 03-05-00 LH Pivot Pin & Cam Sub-Assembly 03-0-00 LH Pivot Pin & Cam Sub-Assembly 3 03-0-00 LH Actuating Cam 3 03-0-00 RH Actuating Cam 03-0-00 Anchor Post & ushing Assembly 5 00-0-00 Anchor Post Locknut 005-0-00 Washer 00-0-00 Pivot Pin Locknut 0-00-00 Actuating Lever 0-05-00 Retractor Spring * Not included with complete brake assembly. Item sold separately. 3
D35, # " x ¹ ₄" Nev-R-Adjust Electric rake CSA approved at 3500#/3.3 SLR XE_Nev-R-Adj_- 3 5 3 Electric rake Item Part No. Qty/rk Description 0 K3--00 LH Complete rake Assembly (shown) 0 K3--00 RH Complete rake Assembly 03-0- acking Plate Assembly 0-0- LH Actuating Lever Arm 0-00- RH Actuating Lever Arm 3 005-0-00 Washer 0-005-00 Wire Clip 5 0-00-00 Retractor Spring K--00 LH Shoe & Lining Kit Contains: #00-3-00 Primary Shoe & Lining #00-3-0 Secondary Shoe & Lining #0-00-00 Shoe Hold Down Pin # #0-0-00 Shoe Hold Down Spring & Cup K--00 RH Shoe & Lining Kit Contains: #00-3-00 Primary Shoe & Lining #00-3-0 Secondary Shoe & Lining #0-00-00 Shoe Hold Down Pin # #0-0-00 Shoe Hold Down Spring & Cup K-03-00 LH & RH rake Adjuster Kit Contains: #0-3-00 Adjusting Screw Spring #0-0-00 LH Lever Spring #0--00 RH Lever Spring #0-0-00 LH Adjuster Assembly #0-03-00 RH Adjuster Assembly #0-5-00 Hook for Cable #0-53-0 LH Adjusting Lever #0-53-0 RH Adjusting Lever #0-533-00 Adjuster Cable #0-55-0 LH Cable Lever #0-55-0 RH Cable Lever #0-5-00 Adjuster Cable K--00 Magnet Kit Contains: #0-0-00 Magnet (green wire) #0-00-00 Magnet Clip #0-00-00 Magnet Spring 0-00-00 Adjuster Slot Plug 0-0-00 Wire Grommet 00-0-00 rake Mounting olt - Press-in * 00-0-00 rake Mounting Nut * Not included with complete brake assembly. Item sold separately.
#F " x ¹ ₄" Electric rake Manual Adjust 3 XE_- 3 5 Note: rake mounting is not the same as a standard #. It will not fit on a #. Electric rake Item Part No. Qty/rk Description 0 K3--00 LH Complete rake Assembly (shown) 0 K3-3-00 RH Complete rake Assembly 03-0- acking Plate Assembly 0-0-05 LH Actuating Lever Arm 0-00-05 RH Actuating Lever Arm 3 005-0-00 Washer 0-005-00 Wire Clip 5 0-00-00 Retractor Spring K--00 Shoe & Lining Kit Contains: #00-3-00 Primary Shoe & Lining #00-3-00 Secondary Shoe & Lining #0-00-00 Shoe Hold Down Pin # #0-0-00 Shoe Hold Down Spring & Cup 03-00-00 Adjuster Assembly 0-0-00 Adjusting Screw Spring K-5-00 Magnet Kit Contains: #0-3-00 Magnet (black wire) #0-00-00 Magnet Clip #0-00-00 Magnet Spring 0-00-00 Adjuster Slot Plug 0-0-00 Wire Grommet 00--00 rake Mounting olt - Press-in *3 00-0-00 rake Mounting Nut * Not included with complete brake assembly. Item sold separately. 33
#F " x ¹ ₄" Nev-R-Adjust Electric rake xe_d_nev-r-adj_- CSA approved at 000#/3.0 SLR 3 5 3 Electric rake Item Part No. Qty/rk Description 0 K3--00 LH Complete rake Assembly (shown) 0 K3--00 RH Complete rake Assembly 03-0- acking Plate Assembly 0-0- LH Actuating Lever Arm 0-00- RH Actuating Lever Arm 3 005-0-00 Washer 0-0-00 Wire Clip 5 0-00-00 Retractor Spring K--00 LH Shoe & Lining Kit Contains: #00-3-00 Primary Shoe & Lining #00-30-0 Secondary Shoe & Lining #0-00-00 Shoe Hold Down Pin # #0-0-00 Shoe Hold Down Spring & Cup K--00 RH Shoe & Lining Kit Contains: #00-3-00 Primary Shoe & Lining #00-30-0 Secondary Shoe & Lining #0-00-00 Shoe Hold Down Pin # #0-0-00 Shoe Hold Down Spring & Cup K-03-00 LH & RH rake Adjuster Kit Contains: #0-3-00 Adjusting Screw Spring #0-0-00 LH Lever Spring #0--00 RH Lever Spring #0-0-00 LH Adjuster Assembly #0-03-00 RH Adjuster Assembly #0-5-00 Hook for Cable #0-53-0 LH Adjusting Lever #0-53-0 RH Adjusting Lever #0-533-00 Adjuster Cable #0-55-0 LH Cable Lever #0-55-0 RH Cable Lever #0-5-00 Adjuster Cable K-5-00 Magnet Kit Contains: #0-3-00 Magnet (black wire) #0-00-00 Magnet Clip #0-00-00 Magnet Spring 0-00-00 Adjuster Slot Plug 0-0-00 Wire Grommet 00--00 rake Mounting olt - Press-in * 00-0-00 rake Mounting Nut * Not included with complete brake assembly. Item sold separately. This brake will not fit axles produced prior to 5//0.
D35, # " x ¹ ₄" Hydraulic rake XH_-0 Uni-Servo 3 CSA approved at 3500#/.0 SLR; Uni-Servo 5 Note: Uni-Servo brakes to be used with surge actuator Hydraulic rake Item Part No. Qty/rk Description 0 K3-3-00 LH Complete rake Assembly-DS 0 K3-3-00 RH Complete rake Assembly-DS 0 K3-3-00 LH Complete rake Assembly-US 0 K3-33-00 RH Complete rake Assembly-US (shown) 03-0-03 acking Plate Assembly (includes item #) 05-0-00 LH rake Cylinder Duo-Servo 05-03-00 RH rake Cylinder Duo-Servo 05-0-00 LH rake Cylinder Uni-Servo 05-05-00 RH rake Cylinder Uni-Servo 3 05-00-00 or Cylinder Push Rod US () DS () 0-00-00 Sems (screw & washer assembly) 5 005-3-00 Anchor Post Washer 0-00-00 Retractor Spring K--00 Shoe & Lining Kit Contains: #00--00 Primary Shoe & Lining #00--00 Secondary Shoe & Lining #0-0-00 Shoe Hold Down Spring & Cup #0-00-00 Shoe Hold Down Pin # 03-00-00 Adjuster Assembly 0-0-00 Adjusting Screw Spring 0-00-00 Adjuster Slot Plug 00-0-00 rake Mounting olt - Press-in * 00-0-00 rake Mounting Nut ns 05-0-00 leeder Screw (included with item #) ns - not shown * Not included with complete brake assembly. Item sold separately. 35
D35, # " x ¹ ₄" Hydraulic rake With Parking Feature XHPF_-0 Uni-Servo Note: Uni-Servo brakes to be used with surge actuator 3 CSA approved at 3500#/.0 SLR; Uni-Servo 5 5 Hydraulic Parking rake Item Part No. Qty/rk Description 0 K3-330-00 LH Complete rake Assembly-w/park-US 0 K3-33-00 RH Complete rake Assembly-w/park-US (shown) 0 K3-00-00 LH Complete rake Assembly-w/park-DS 0 K3-0-00 RH Complete rake Assembly-w/park-DS (shown) 03-0-03 acking Plate Assembly (includes item #) 05-0-00 LH rake Cylinder Uni-Servo 05-05-00 RH rake Cylinder Uni-Servo 05-0-00 LH rake Cylinder Duo-Servo 05-03-00 RH rake Cylinder Duo-Servo 3 05-00-00 or Cylinder Push Rod US () DS () 0-00-00 Sems (screw & washer assembly) 5 005-3-00 Anchor Post Washer 0-00-00 Retractor Spring K--00 Shoe & Lining Kit Contains: #00--00 Primary Shoe & Lining #00--00 Secondary Shoe & Lining #0-0-00 Shoe Hold Down Spring & Cup #0-00-00 Shoe Hold Down Pin # 03-00-00 Adjuster Assembly 0-0-00 Adjusting Screw Spring 0-00-00 Adjuster Slot Plug 00-0-00 rake Mounting olt - Press-in * 00-0-00 rake Mounting Nut 0--0 LH Parking Lever & Pin Assembly 0--0 RH Parking Lever & Pin Assembly 5 0--00 Parking Strut 0-3-00 Parking Strut Spring 005--00 Spring Tension Washer 0-055-00 Retainer ns 05-0-00 leeder Screw (included with item #) *ns 0-5-00 Park rake Cable ns - not shown * Not included with complete brake assembly. Item sold separately. 3
D35, # " x ¹ ₄" Hydraulic rake Free acking XHF_- 3 CSA approved at 3500#/.0 SLR; Uni-Servo 3 5 A Note: Uni-Servo brakes to be used with surge actuator Hydraulic Free acking rake Item Part No. Qty/rk Description 0 K3-3-00 LH Complete rake Assembly-F 0 K3-35-00 RH Complete rake Assembly-F (shown) 03-0-03 acking Plate Assembly (includes item #) 05-0-00 LH rake Cylinder Uni-Servo 05-05-00 RH rake Cylinder Uni-Servo 3 05-00-00 Cylinder Push Rod 0-00-00 Sems (screw & washer assembly) 5 03-0-0 Travel Link 0-00-00 Retractor Spring A 0--0 Shoe Lever Return Spring K-33-00 Shoe & Lining Kit Contains: #00--00 Primary Shoe & Lining #00--00 Secondary Shoe & Lining #0-0-00 Shoe Hold Down Spring & Cup #0-00-00 Shoe Hold Down Pin # 03-00-00 Adjuster Assembly 0-03-00 Adjusting Screw Spring 0-00-00 Adjuster Slot Plug 00-0-00 rake Mounting olt - Press-in * 00-0-00 rake Mounting Nut 3 00-0-0 Shoe Lever 005-0-00 Washer 0--0 Primary Shoe Return ns 05-0-00 leeder Screw (included with item #) *ns 0-5-00 Park rake Cable ns - not shown * Not included with complete brake assembly. Item sold separately. Hydraulic Free acking rake Corrosion Resistant Item Part No. Qty/rk Description 0 K3-3-0 LH Complete rake Assembly-F 0 K3-35-0 RH Complete rake Assembly-F 03-0-0 acking Plate Assembly (includes item #) 05-0-0 LH rake Cylinder Uni-Servo 05-05-0 RH rake Cylinder Uni-Servo 3 05-00-00 Cylinder Push Rod 0-00-00 Sems (screw & washer assembly) 5 03-0-0 Travel Link 0-00-0 Retractor Spring A 0--03 Shoe Lever Return Spring K-3-00 Shoe & Lining Kit Contains: #00--00 Primary Shoe & Lining #00--00 Secondary Shoe & Lining #0-0-00 Shoe Hold Down Spring & Cup #0-00-00 Shoe Hold Down Pin # 03-00-0 Adjuster Assembly 0-03-0 Adjusting Screw Spring 0-00-00 Adjuster Slot Plug 00-0-00 rake Mounting olt - Press-in * 00-0-00 rake Mounting Nut 3 00-0-0 Shoe Lever 005-0-00 Washer 0--03 Primary Shoe Return Spring ns 05-0-00 leeder Screw (included with item #) 3
D35, # Disc rake for 3,500 Lb. Axles 5 EXP3500_Disc_-3 3 Disc rake 3500# Item Part No. Qty/rk Description 00-00-0 Anchor Yoke Assembly (includes item #) 00-0-00 rake Mounting olt - Press-in 3 K--00 Caliper Assembly Kit (includes items #5, ) 00-5-00 Caliper Mounting olt 5 K-3-00 rake Pad Kit (axle set) K--00 Rotor Kit 00-0-00 Yoke Mounting Nut ns 05-0-00 leed Screw & Adapter (service part only) Disc rake Hubs & Studs Item Part No. Qty/rk Description 00-- ¹ ₂" Stud 5 on.50 00-50-00 5 ¹ ₂-0 x.0" Wheel Stud ns 05-05-00 leeder Screw (included with items #3, ) ns - not shown 3
Recommended Wheel Clearance for 3,500 Lb. Disc rake. Dia.. Dia. Hubface Wheel Mounting Surface.0.. 3. Dia. CAUTION: The above hub/rotor profile shows the minimum clearance needed to insure that no part of the wheel makes contact with any brake component. Make sure the wheel is in full contact with the hub face and does not drag against the brake caliper. If there is not full contact with the hub face, you may experience a dangerous wheel separation. 3