General Applications Axle Types 300-000 Lbs. apacity omplete service manual Precision machined steel spindles and integral cast iron hub/drums Press-in wheel studs 0" x ¼" SA approved electric brakes " x " SA approved electric brakes " x " hydraulic brakes Electric and hydraulic brakes are available with and without parking feature ydraulic free backing brakes are available Inner wiring system for easier installation and protection of brake wiring Standard grease lubrication; E-Z Lube or Nev-R-Lube option, & 0 leaf spring 3 igh strength 3" diameter tube Straight or rop spindles (" drop only) Totally rubber-cushioned for smooth, quiet, independent ride Easy installation with less maintenance Less transfer of road shock which insulates cargo from road shocks and vibration Rubber cords compounded for maximum dependability and durability Load-carrying cross member Self-damping action Independent wheel suspension system year limited warranty on suspension system Low profile for maximum road clearance Various starting angles to control trailer height igh and low profile brackets with optional mounting brackets available Rubber cushioning eliminates metal-to-metal contact Shock absorption provided by the natural hysteresis of rubber Single or tandem axle assemblies urable, wear-resistant components AUTION: Triple axle assemblies are NOT recommended for Torflex axles. igh quality alloy steel springs in a variety of capacities Single, tandem, or triple axle assemblies with equalized suspensions Slipper spring or double eye leaf spring suspension Optional hanger and attaching parts kits available urable, wear-resistant components year limited warranty
Torflex Application Information Start Angle own Articulation imensions imensions are for top mount only. Side mount is." higher. Allow 3" bump clearance from full load. racket Profile Forward No Load Full Load Shock Load L L L Low.0..0. 3.0. igh.... 3.. Left and Assembly Shown EXTER Arm Length Axle Location L Top of racket enter of Spindle Start Angle. own 0 own 0 0 Up. Up Low.0...00 0.. igh....00.. Low.. 0.. -0.3. igh 3.... 0.. Low..00-0.3. -..0 igh..00 0.. -0..0 Low 0.. -..0 -.. igh.. -0..0 -.. Low -0.3. -.. -3. 3. igh 0.. -.3. -.0 3. # Overhang Per Side Spindle Min. isc.* Max. Short.00".0" 0." Standard.0".0" 0." * Minimum overhang with disc brakes Note: Positive numbers in the column indicate the spindle is ELOW the top of the bracket. onversely, negative numbers are AOVE the top of the bracket. Full Load imensions imensions are for low profile, top mount only. igh profile brackets are." higher. Side mount is." higher. Allow 3" bump clearance from full load. Top of racket E Top of racket E Top of racket E 0 n, 0 0 Up,. Up. n, N Start Angle * * * own. own 0 own 0 0 Up. Up Tire E ST/R 3.0... 0.3... 0. 3. 3. -0... -... -. 0.. LT3/R.3....3.. 3. 0... -0. 3.. -... -... LT/R 3.... 0...3 3. 0..0. -0. 3.0. -..0. -..0..R.LT 3.... 0... 3.0 0..3.3-0. 3.3.3 -..3.3 -..3.3 olumns and E are dimensional examples only: * Static Loaded Radius ** E Inflated Radius 3
Torflex Application Information racket imensions Forward For Wiring Access olt Size J A G Right and Side of Axle Shown A Low Profile E / G F Side Mount anger # racket imensions Low igh A.. 3.0 3.0.0.0.00.00 E.00.00 F 3.. G.0.0 J.3.3 N ----.03 P ----.00 Q ----.00 olt Size ⁵ ₈" bolt Tube Size 3.03 3.03 P E F igh Profile N Q 3
Leaf Spring Application Information ouble Eye Springs For Standard 33" Axle Spacing Single A/P--00 Tandem A/P-33-00 Triple A/P-33-00 Spring Length " " " A. 3.0..00.0.0. 3.00 33.00 0..00 3.00 E. 3.00 33.00 For Optional 3" Axle Spacing Tandem A/P--00 Triple A/P-3-00 Spring Length " " ".00.0 30.0 30.0 33.00 3.00 0..00 3.00 E 30.0 33.00 3.00 Overhang Per Side Min. Max. Straight.00".0" Overhang Per Side Min. isc.* Max. Straight.3".00".0" " rop." N/A.0" Nev-R-Lube.".00".0" * Minimum overhang with disc brakes 0 Overhang Per Side Min. isc.* Max. Straight.3".00" 0.00" " rop." N/A 0.00" Nev-R-Lube.".00" 0.00" * Minimum overhang with disc brakes Forward Z Y Z Y SLR A SLR E Z Y SLR ouble Eye Axle Assemblies anger Kits Quantity Per Kit Part No. escription eight GR-0-00 GR-0-00 GR--00 GR--00 GR-3-00 0-00-00 anger 3." ---- 0-00-00 Front anger." ---- ---- ---- ---- 0-00-00 Front anger.0" ---- ---- ---- ---- 0-03-00 enter anger 3." ---- ---- ---- 030-00-00 Rear anger." ---- ---- ---- Attaching Parts Kits Part No. escription A/P--00 A/P-33-00 A/P--00 A/P-33-00 A/P-3-00 00-0-0 Flange Locknut 00--00 Shackle olt 0 0 03-0-0 Equalizer ---- ---- ---- 03-0-0 Equalizer ---- ---- ---- ---- 03--0 Equalizer ---- ---- ---- 03--0 Equalizer ---- ---- ---- ---- 0-0-00 Shackle Link ---- 0-0-00 Shackle Link, Long ---- ---- ---- ---- 0-00-00 Shackle Link Assembly ---- 0-0-00 Shackle Link Assembly, Long ---- ---- ---- ---- For 3" axle spacing using " springs 3
Leaf Spring Application Information Z Y Z Y Z Y SLR SLR SLR A Forward E Slipper Springs Single Tandem Triple A/P-03-00 A/P-0-00 A/P--00 A/P-30-00 A/P-3-00 A.0 ---- ---- ---- ---- ----. 30.. 30. ---- 33. 3.0 33. 3.0..... E ---- ---- ---- 33.0 3.0 Note: All " wide slipper springs For 33." axle spacing For 3" axle spacing A,, E anger Spacing Axle Spacing Axle Location enter of Spindle Y Frame eight Z Top of Tire to ottom of Frame SLR Static Load Radius To determine these values, contact your local sales engineer or distributor to run ProSpec. E Slipper Spring Axle Assemblies anger Kits Quantity Per Kit Part No. escription eight GR-0-00 GR-0-00 GR-30-00 0-00-00 Front anger." 0-00-00 enter anger 3.0" ---- 030-0-00 Rear anger.00" Attaching Parts Kits Part No. escription A/P-03-00 A/P-0-00 A/P--00 A/P-30-00 A/P-3-00 00-00-0 ⁹ ₁₆- Locknut 00-0-00 Keeper Nut 00--00 Equalizer Nut ---- 00-00-0 Equalizer olt ---- 00-00-00 Keeper olt 00-0-00 Spring Eye olt 03-00-00 Equalizer ---- ---- ---- 03-0-0 Equalizer ---- ---- ---- For 33." axle spacing For 3" axle spacing Some combinations of hangers and spring mountings may result in insufficient bump clearance. Refer to the Miscellaneous section for additional hanger kits, A/P kits, or other tires. 0
ub Group Exp00_3- A 3 0 0 A Grease Lube Parts Item Part No. escription 00-00-00 Grease Seal A 00-0-00 Grease Seal for E-Z Lube 03-033-0 L Inner earing one 3 03-033-0 L Inner earing up 03-03-0 LM00 Outer earing up 03-03-0 LM0 Outer earing one 00--00 Spindle Nut 0-00-00 otter Pin (not used with E-Z Lube ) 0-00-00 Grease ap A 0-0-0 Grease ap for E-Z Lube 0-00-00 Rubber Plug for E-Z Lube 00-03-00 Spindle Washer 00--00 Special Jam Nut for E-Z Lube (after 00) 00-0-00 Spindle Nut Retainer for E-Z Lube (after 00) ubs Item Part No. escription olt ircle ubs and rums 00-0-0 ½" Stud on.0 Studs & Wheel Nuts Item Part No. escription 0 00--00 ½-0 Pressed Wheel Stud 00-00-00 ½-0 0 one Nut Item Part No. escription ns K3--00 L Electric ns K3--00 R Electric 0" x ¹ ₄" rakes Old Style efore //0 0" x ¹ ₄" rakes New Style After //0 Item Part No. escription 0 K3--00 L Electric 0 K3-3-00 R Electric ns - not shown Note: Spindle is not available for resale.
ub Group Exp00_3-3 0 0 A Grease Lube Parts Item Part No. escription 00-03-00 Grease Seal, E-Z Lube Seal 00-03-00 Oil Seal 00-0-00.0" Grease Seal 03-030-0 0 Inner earing cone 3 03-030-0 0 Inner earing up 03-03-0 LM00 Outer earing up (for 00#) 03-03-0 LM0 Outer earing one (for 00#) 03-0-0 Outer earing up (for 000#) 03-0-0 3 Outer earing one (for 000#) 00--00 Spindle Nut 0-00-00 otter Pin (not used with E-Z Lube ) 0-00-00 Grease ap A 0-0-0 Grease ap for E-Z Lube 0-00-00 Rubber Plug for E-Z Lube 00-03-00 Spindle Washer 00--00 Special Jam Nut for E-Z Lube (after 00) 00-0-00 Spindle Nut Retainer for E-Z Lube (after 00) ubs Item Part No. escription olt ircle ubs and rums 00-0-0 ½" Stud for 00# on.0 00-0-0 ½" Stud 3 bearing for 000# on.0 Plain ubs 00-3-0 ½" Stud for 00# on.0 00-3-0 ½" Stud 3 bearing for 000# on.0 Studs & Wheel Nuts Item Part No. escription 0 00--00 ½-0 x. Long Press-in Stud* 0 00--00 ½-0 x.0 Long Press-in Stud* (hub-drum after /0) 00-00-00 ½-0 0 one Nut * Stud length measured under head to end of stud. on. hubs are available on these axles. See section in 00-000 lbs. capacity. " x " rakes Item Part No. escription 0 K3-0-00/K3-0-00 L/R Electric ns K3--00/K3-3-00 L/R Electric w/park ns K3-3-00/K3-3-00 L/R Electric K SA ns K3-3-00/K3-3-00 L/R Electric K SA w/park ns K3-3-00/K3-3-00 L/R ydraulic Uni-servo ns K3-30-00/K3-3-00 L/R ydraulic Uni-servo w/park ns K3-3-00/K3-33-00 L/R ydraulic uo-servo ns K3-3-00/K3-3-00 L/R ydraulic uo-servo w/park ns K3-3-00/K3-33-00 L/R ydraulic Free acking ns K3-30-00/K3-3-00 L/R ydraulic Free acking w/park ns K3-3-0/K3-33-0 L/R ydraulic F orrosion Resistant ns K3-30-0/K3-3-0 L/R ydraulic F orrosion Resistant w/park ns K3--00/K3--00 L/R Electric Nev-R-Adjust ns K3--00/K3--00 L/R Electric K SA Nev-R-Adjust ns - not shown Note: Spindle is not available for resale.
Nev-R-Lube ub Group Exp00nvr_3-0 3 3 Nev-R-Lube Parts MM & 0MM Item Part No. escription 3 00--0 Spindle Washer, mm 00-3-00 Spindle Nut 0-00-00 Washer, Torque Label 0-0-00 Snap Ring 0-0-00 ub ap, mm " x " rakes Item Part No. escription 0 K3-0-00/K3-0-00 L/R Electric, K ns K3--00/K3-3-00 L/R Electric w/park, K ns K3-3-00/K3-3-00 L/R ydraulic Uni-servo,.K ns K3-30-00/K3-3-00 L/R ydraulic Uni-servo w/park,.k ns K3-3-00/K3-33-00 L/R ydraulic uo-servo,.k ns K3-3-00/K3-3-00 L/R ydraulic uo-servo w/park,.k ns K3-33-00/K3-33-00 L/R ydraulic Uni-servo, K ns K3-33-00/K3-33-00 L/R ydraulic Uni-servo w/park, K ns K3-33-00/K3-33-00 L/R ydraulic uo-servo, K ns K3-33-00/K3-333-00 L/R ydraulic uo-servo w/park, K ns K3-3-00/K3-33-00 L/R ydraulic Free acking, K ns K3-30-00/K3-3-00 L/R ydraulic Free acking w/park, K ns K3--00/K3--00 L/R Electric Nev-R-Adjust ns K3--00/K3--00 L/R Electric K SA Nev-R-Adjust ns - not shown Note: Spindle is not available for resale. ubs With earing and Wheel Studs Item Part No. escription olt ircle 00-3-0 ub and rum includes: 00--00 ¹ ₂-0 Press-in Studs 03-03-03 mm earing artridge 0-0-00 earing Retainer on.0 Wheel Nuts Item Part No. escription 3 00-00-00 ½-0 0 one Nut on. hubs are available on these axles. See section in 00-000 lbs. capacity. 3
SAVE TIME, SAVE MONEY WIT NEV-R-LUE Nev-R-Lube Features No more inner and outer bearings to repack Pre-lubricated and resistant to contamination Sealed for life, no bearing maintenance Increased durability and reliability No replacing seals when checking brakes Pre-set adjustment allows for easy installation uman error is virtually eliminated in bearing adjustment Five-year or 00,000 mile limited warranty What is Nev-R-Lube? exter s Nev-R-Lube bearings are comprised of opposed tapered roller bearing cones sealed inside of a precision ground, one piece double cup arrangement. These bearings are designed with a small amount of axial end play. The end play is essential to the longevity of the bearing s service life. Nev-R-Lube is not designed for immersion in water, such as boat trailer use. mm SEALE ARTRIGE EARINGS and 0 leaf spring axles # and # Torflex axles Straight spindles only Up to,000 lbs. capacity on.0" bolt circle hub-drums " x " brakes Use only zero offset wheels 0mm SEALE ARTRIGE EARINGS 0,, and 0 leaf spring axles #, #V, and #3 Torflex axles Straight spindles only Up to,000 lbs. capacity on.0" bolt circle hub-drums " x ", ¹ ₄" x ¹ ₂", and ¹ ₄" x 3³ ₈" brakes an be used with zero to ¹ ₂" inset wheels at,000 lb. ratings Zero offset or 0." inset wheels only at,000 lbs. capacity Nev-R-Lube is subject to the maintenance and inspection procedures as outlined in the exter Operation Maintenance Service Manual.
0" x ¹ ₄" Electric rake Manual Adjust 3 0 0XE_- SA approved at 00#/3.0 SLR 3 Electric rake Old Style efore //0 Item Part No. Qty/rk escription ns K3--00 L omplete rake Assembly ns K3--00 R omplete rake Assembly 03-0- acking Plate Assembly 0-0-0 L Actuating Lever Arm 0-00-0 R Actuating Lever Arm 3 00-0-00 Washer 0-00-00 Wire lip 0-00-00 Retractor Spring K--00 Shoe & Lining Kit ontains: #00-3-00 Primary Shoe & Lining #00-3-00 Secondary Shoe & Lining #0-00-00 Shoe old own Pin # #0-0-00 Shoe old own Spring & up 03-00-00 Adjuster Assembly 0-0-00 Adjusting Screw Spring K--00 Magnet Kit ontains: #0-3-00 Magnet (black wire) #0-00-00 Magnet lip #0-00-00 Magnet Spring 0 0-00-00 Adjuster Slot Plug 0-0-00 Wire Grommet 00--00 rake Mounting olt - Press-in *3 00-0-00 rake Mounting Nut ns - not shown * Not included with complete brake assembly. Item sold separately. Electric rake New Style After //0 Item Part No. Qty/rk escription 0 K3--00 L omplete rake Assembly (shown) 0 K3-3-00 R omplete rake Assembly 03-0- acking Plate Assembly 0-0-0 L Actuating Lever Arm 0-00-0 R Actuating Lever Arm 3 00-0-00 Washer 0-00-00 Wire lip 0-00-00 Retractor Spring K--00 Shoe & Lining Kit ontains: #00-3-00 Primary Shoe & Lining #00-3-00 Secondary Shoe & Lining #0-00-00 Shoe old own Pin # #0-0-00 Shoe old own Spring & up 03-00-00 Adjuster Assembly 0-0-00 Adjusting Screw Spring K--00 Magnet Kit ontains: #0-3-00 Magnet (black wire) #0-00-00 Magnet lip #0-00-00 Magnet Spring 0 0-00-00 Adjuster Slot Plug 0-0-00 Wire Grommet 00--00 rake Mounting olt - Press-in *3 00-0-00 rake Mounting Nut * Not included with complete brake assembly. Item sold separately.
0" x ¹ ₄" Nev-R-Adjust Electric rake 0 0xE Nev-R-Adj_- SA approved at 00#/3.0 SLR 3 Electric rake Item Part No. Qty/rk escription 0 K3--00 L omplete rake Assembly (shown) 0 K3--00 R omplete rake Assembly 03-0- acking Plate Assembly 0-0-0 L Actuating Lever Arm 0-00-0 R Actuating Lever Arm 3 00-0-00 Washer 0-0-00 Wire lip 0-00-00 Retractor Spring K--00 L Shoe & Lining Kit ontains: #00-3-00 Primary Shoe & Lining #00-30-0 Secondary Shoe & Lining #0-00-00 Shoe old own Pin # #0-0-00 Shoe old own Spring & up K--00 R Shoe & Lining Kit ontains: #00-3-00 Primary Shoe & Lining #00-30-0 Secondary Shoe & Lining #0-00-00 Shoe old own Pin # #0-0-00 Shoe old own Spring & up K-03-00 L & R rake Adjuster Kit ontains: #0-3-00 Adjusting Screw Spring #0-0-00 L Lever Spring #0--00 R Lever Spring #0-0-00 L Adjuster Assembly #0-03-00 R Adjuster Assembly #0--00 ook for able #0-3-0 L Adjusting Lever #0-3-0 R Adjusting Lever #0-33-00 Adjuster able #0--0 L able Lever #0--0 R able Lever #0--00 Adjuster able K--00 Magnet Kit ontains: #0-3-00 Magnet (black wire) #0-00-00 Magnet lip #0-00-00 Magnet Spring 0-00-00 Adjuster Slot Plug 0 0-0-00 Wire Grommet 00--00 rake Mounting olt - Press-in * 00-0-00 rake Mounting Nut * Not included with complete brake assembly. Item sold separately. This brake will not fit axles produced prior to //0.
" x " Electric rake 0 X_K_-0 3 SA approved at 00#/. SLR SA approved at 000#/. SLR Electric rake 000# (SA 00#) Item Part No. Qty/rk escription 0 K3-0-00 L omplete rake Assembly 0 K3-0-00 R omplete rake Assembly (shown) 03-0-0 acking Plate Assembly 0-0-0 L Actuating Lever Arm Assembly 0-0-0 R Actuating Lever Arm Assembly 3 0-00-00 Wire lip 0-00-00 Retractor Spring K-0-00 Shoe & Lining Kit ontains: #00-0-00 Primary Shoe & Lining #00-0-00 Secondary Shoe & Lining #0-0-00 Shoe old own Pin # #0-0-00 Shoe old own Spring & up 03-00-00 Adjuster Assembly 0-0-00 Adjusting Screw Spring K-0-00 Magnet Kit ontains: #0--00 Magnet (white wire) #0-00-00 Magnet lip #0-00-00 Magnet Spring 0-00-00 Adjuster Slot Plug 0 0-0-00 Wire Grommet 00-0-00 Anchor Post Washer * 00-3-00 Nut Washer Assembly * Not included with complete brake assembly. Item sold separately. Electric rake 000# (SA 000#) Item Part No. Qty/rk escription 0 K3-3-00 L omplete rake Assembly 0 K3-3-00 R omplete rake Assembly 03-0-0 acking Plate Assembly 0-0-0 L Actuating Lever Arm Assembly 0-0-0 R Actuating Lever Arm Assembly 3 0-00-00 Wire lip 0-00-00 Retractor Spring K--00 Shoe & Lining Kit ontains: #00--00 Primary Shoe & Lining #00--00 Secondary Shoe & Lining #0-0-00 Shoe old own Pin # #0-0-00 Shoe old own Spring & up 03-00-00 Adjuster Assembly 0-0-00 Adjusting Screw Spring K-0-00 Magnet Kit ontains: #0--00 Magnet (white wire) #0-00-00 Magnet lip #0-00-00 Magnet Spring 0-00-00 Adjuster Slot Plug 0 0-0-00 Wire Grommet 00-0-00 Anchor Post Washer * 00-3-00 Nut Washer Assembly
" x " Electric rake With Parking Feature 0 XEPF_-0 3 SA approved at 00#/. SLR SA approved at 000#/. SLR 3 Electric Parking rake 000# (SA 00#) Item Part No. Qty/rk escription 0 K3--00 L omplete rake Assembly 0 K3-3-00 R omplete rake Assembly (shown) 0-0-0 L Actuating Lever Arm Assembly 0-0-0 R Actuating Lever Arm Assembly 3 0-00-00 Wire lip K-0-00 Shoe & Lining Kit ontains: #00-0-00 Primary Shoe & Lining #00-0-00 Secondary Shoe & Lining #0-0-00 Shoe old own Pin # #0-0-00 Shoe old own Spring & up 03-00-00 Adjuster Assembly 0-0-00 Adjusting Screw Spring K-0-00 Magnet Kit ontains: #0--00 Magnet (white wire) #0-00-00 Magnet lip #0-00-00 Magnet Spring 0-00-00 Adjuster Slot Plug 0 0-0-00 Wire Grommet * 00-3-00 Nut Washer Assembly 0 03-0-0 L acking Plate Assembly omplete (includes #-) 0 03-0-0 R acking Plate Assembly omplete (includes #-) 03-0-0 L acking Plate Assembly 03-0-0 R acking Plate Assembly 03-0-00 L Pivot Pin & am Sub-Assembly 03-0-00 R Pivot Pin & am Sub-Assembly 3 03-0-00 L Actuating am 3 03-0-00 R Actuating am 03-0-00 Anchor Post & ushing Sub-Assembly 00-0-00 Anchor Post Locknut 00-0-00 Washer 00-0-00 Pivot Pin Locknut 0-00-00 Parking rake Lever 0-00-00 Retractor Spring * Not included with complete brake assembly. Item sold separately. Electric Parking rake 000# (SA 000#) Item Part No. Qty/rk escription 0 K3-3-00 L omplete rake Assembly 0 K3-3-00 R omplete rake Assembly 0-0-0 L Actuating Lever Arm Assembly 0-0-0 R Actuating Lever Arm Assembly 3 0-00-00 Wire lip K--00 Shoe & Lining Kit ontains: #00--00 Primary Shoe & Lining #00--00 Secondary Shoe & Lining #0-0-00 Shoe old own Pin # #0-0-00 Shoe old own Spring & up 03-00-00 Adjuster Assembly 0-0-00 Adjusting Screw Spring K-0-00 Magnet Kit ontains: #0--00 Magnet (white wire) #0-00-00 Magnet lip #0-00-00 Magnet Spring 0-00-00 Adjuster Slot Plug 0 0-0-00 Wire Grommet * 00-3-00 Nut Washer Assembly 0 03-0-0 L acking Plate Assembly omplete (includes #-) 0 03-0-0 R acking Plate Assembly omplete (includes #-) 03-0-0 L acking Plate Assembly 03-0-0 R acking Plate Assembly 03-0-00 L Pivot Pin & am Sub-Assembly 03-0-00 R Pivot Pin & am Sub-Assembly 3 03-0-00 L Actuating am 3 03-0-00 R Actuating am 03-0-00 Anchor Post & ushing Sub-Assembly 00-0-00 Anchor Post Locknut 00-0-00 Washer 00-0-00 Pivot Pin Locknut 0-00-00 Parking rake Lever 0-00-00 Retractor Spring
" x " Nev-R-Adjust Electric rake x_nev-r-adj_-0 3 SA approved at 00#/. SLR SA approved at 000#/. SLR 0 Electric rake 000# (SA 00#) Item Part No. Qty/rk escription 0 K3--00 L omplete rake Assembly 0 K3--00 R omplete rake Assembly (shown) 03-0-0 acking Plate Assembly 0-0-0 L Actuating Lever Arm Assembly 0-0-0 R Actuating Lever Arm Assembly 3 0-00-00 Wire lip 0-00-00 Retractor Spring K-3-00 L Shoe & Lining Kit ontains: #00-0-00 Primary Shoe & Lining #00-0-03 Secondary Shoe & Lining #0-0-00 Shoe old own Pin # #0-0-00 Shoe old own Spring & up K--00 R Shoe & Lining Kit ontains: #00-0-00 Primary Shoe & Lining #00-0-0 Secondary Shoe & Lining #0-0-00 Shoe old own Pin # #0-0-00 Shoe old own Spring & up K--00 L & R rake Adjuster Kit ontains: #0-3-00 Adjusting Screw Spring #0-0-00 L Lever Spring #0--00 R Lever Spring #0-0-00 L Adjuster Assembly #0-03-00 R Adjuster Assembly #0--00 Adjuster able #0--00 ook for able #0-30-0 L Adjusting Lever #0-30-0 R Adjusting Lever K-0-00 Magnet Kit ontains: #0--00 Magnet (white wire) #0-00-00 Magnet lip #0-00-00 Magnet Spring 0-00-00 Adjuster Slot Plug 0-0-00 Wire Grommet 0 00-0-00 Anchor Post Washer * 00-3-00 Nut Washer Assembly * Not included with complete brake assembly. Item sold separately. Electric rake 000# (SA 000#) Item Part No. Qty/rk escription 0 K3--00 L omplete rake Assembly 0 K3--00 R omplete rake Assembly (shown) 03-0-0 acking Plate Assembly 0-0-0 L Actuating Lever Arm Assembly 0-0-0 R Actuating Lever Arm Assembly 3 0-00-00 Wire lip 0-00-00 Retractor Spring K--00 L Shoe & Lining Kit ontains: #00--00 Primary Shoe & Lining #00--0 Secondary Shoe & Lining #0-0-00 Shoe old own Pin # #0-0-00 Shoe old own Spring & up K--00 R Shoe & Lining Kit ontains: #00--00 Primary Shoe & Lining #00--0 Secondary Shoe & Lining #0-0-00 Shoe old own Pin # #0-0-00 Shoe old own Spring & up K--00 L & R rake Adjuster Kit ontains: #0-3-00 Adjusting Screw Spring #0-0-00 L Lever Spring #0--00 R Lever Spring #0-0-00 L Adjuster Assembly #0-03-00 R Adjuster Assembly #0--00 Adjuster able #0--00 ook for able #0-30-0 L Adjusting Lever #0-30-0 R Adjusting Lever K-0-00 Magnet Kit ontains: #0--00 Magnet (white wire) #0-00-00 Magnet lip #0-00-00 Magnet Spring 0-00-00 Adjuster Slot Plug 0-0-00 Wire Grommet 0 00-0-00 Anchor Post Washer * 00-3-00 Nut Washer Assembly
" x " ydraulic rake 0 X_-0 3 Uni-Servo Note: Uni-Servo brakes to be used with surge actuator ydraulic rake 00# Item Part No. Qty/rk escription 0 K3-3-00 L omplete rake Assembly-S 0 K3-33-00 R omplete rake Assembly-S (shown) 0 K3-3-00 L omplete rake Assembly-US 0 K3-3-00 R omplete rake Assembly-US (shown) 03-03-03 acking Plate Assembly 0-0-00 L rake ylinder uo-servo 0-03-00 R rake ylinder uo-servo 0-0-00 L rake ylinder Uni-Servo 0-0-00 R rake ylinder Uni-Servo 3 0-00-00 or ylinder Push Rod US () S () 0-00-00 Sems (screw & washer assembly) 00-3-00 Anchor Post Washer 0-0-00 Retractor Spring K--00 Shoe & Lining Kit ontains: #00-0-00 Primary Shoe & Lining #00-0-00 Secondary Shoe & Lining #0-0-00 Shoe old own Spring & up #0-0-00 Shoe old own Pin # 03-0-00 Adjuster Assembly 0-0-00 Adjusting Screw Spring 0 0-00-00 Adjuster Slot Plug * 00-3-00 Nut Washer Assembly ns 0-0-00 leeder Screw (included with item #) ns - not shown * Not included with complete brake assembly. Item sold separately. 0
" x " ydraulic rake With Parking Feature XPF_-0 0 Uni-Servo 3 Note: Uni-Servo brakes to be used with surge actuator ydraulic Parking rake 00# Item Part No. Qty/rk escription 0 K3-3-00 L omplete rake Assembly-S 0 K3-3-00 R omplete rake Assembly-S (shown) 0 K3-30-00 L omplete rake Assembly-US 0 K3-3-00 R omplete rake Assembly-US (shown) 03-03- L acking Plate Assembly 03-03-0 R acking Plate Assembly 0-0-00 L rake ylinder uo-servo 0-03-00 R rake ylinder uo-servo 0-0-00 L rake ylinder Uni-Servo 0-0-00 R rake ylinder Uni-Servo 3 0-00-00 or ylinder Push Rod US () S () 0-00-00 Sems (screw & washer assembly) 00-3-00 Anchor Post Washer 0-0-00 Retractor Spring K--00 Shoe & Lining Kit ontains: #00-0-00 Primary Shoe & Lining #00-0-00 Secondary Shoe & Lining #0-0-00 Shoe old own Spring & up #0-0-00 Shoe old own Pin # 03-0-00 Adjuster Assembly 0-0-00 Adjusting Screw Spring 0 0-00-00 Adjuster Slot Plug * 00-3-00 Nut Washer Assembly 0-0-0 L Parking Lever and Pin 0--0 R parking Lever and Pin 0-0-00 Parking Strut 0-03-00 Parking Strut Spring 00--00 Spring Tension Washer 0-0-00 Retainer ns 0-0-00 leeder Screw (included with item #) *ns 0--00 Park rake able ns - not shown * Not included with complete brake assembly. Item sold separately.
- isc rake for,000 Lb. Axles SA approved at 000#/.3 SLR Exp000disc_- 3 isc rake 000# Item Part No. Qty/rk escription 00-00-0 L Anchor Yoke 00-00-0 R Anchor Yoke (shown) K-3-00 aliper Assembly Kit for L or R ontains: 00-0-00 aliper Mounting Nut 00--00 aliper Mounting olt 0-0-00 otter Ring 0-00-00 Tube lamp 0-0-00 leeder Screw 0-0-00 Adapter Fitting 0-03-00 Pad Retaining Pin 0-3-00 ross Over ydraulic Line (yokes without notch) 0--00 ross Over ydraulic Line (yokes with notch) 0-00-00 ex olt 0-00-0 Assembled aliper alf 3 K--00 rake Pad Kit (axle set) K-3-00 Rotor Kit 00-3-00 ³ ₈" rake Mounting Nut-Washer Assembly isc rake ubs & Studs Item Part No. Qty/rk escription 00-03-0 Grease ¹ ₂" Studs on.0 00--00 ¹ ₂-0 x.0" Press-in Stud isc rake 000# With MM Nev-R-Lube Item Part No. Qty/rk escription 00-00-0 L Anchor Yoke 00-00-0 R Anchor Yoke K-3-00 aliper Assembly Kit for L or R ontains: 00-0-00 aliper Mounting Nut 00--00 aliper Mounting olt 0-0-00 otter Ring 0-00-00 Tube lamp 0-0-00 leeder Screw 0-0-00 Adapter Fitting 0-03-00 Pad Retaining Pin 0-3-00 ross Over ydraulic Line (yokes without notch) 0--00 ross Over ydraulic Line (yokes with notch) 0-00-00 ex olt 0-00-0 Assembled aliper alf 3 K--00 rake Pad Kit (axle set) K-3-00 Rotor Kit 00-3-00 ³ ₈" rake Mounting Nut-Washer Assembly Nev-R-Lube isc rake ubs Item Part No. Qty/rk escription 00-0-0 ¹ ₂" Studs, mm on.0 00--00 ¹ ₂-0 x.0" Press-in Stud