WWW.MCSALES.CO.UK PRESSBRAKE-TOOLING-ADAPTORS-SAW BLADES The punches are available in the following standard lengths: 415mm, 835mm, and Sectional 85mm Amada/ Promecam Punches and Dies (European Style) Price List 13 Tel: 845 29961 Email: info@mcsales.co.uk www.mcsales.co.uk
INTRODUCTION This is our new 4 page catalogue, produced to show you, our most valued customers, some but not all of the products we have to offer. We include a good selection of punches and amongst our dies you will find single, twin, four way and T-Vee s in sizes form 6mm upwards. We have not shown all our Hemming die range but many others are available. If we do not show the correct size of holder or clamp for your machine, just send us a drawing and we will happily supply a quote. Our SHSS saw blades and welded loops for band saws are supplied by a leading Dutch manufacturer which means you can expect the best quality and a long life on all of these products. If you cannot find what you are looking for, then please contact us on 845 29961 That s about it, apart from our price list which is printed on a separate sheet and should be with this catalogue but again, if you can t find it, simply contact us and we will send you one by post or email. Our contact details are also shown at the bottom of the front cover. Index Punches 3-9 Dies - 24 Flattening Tools 25-26 Adapters 27-28 Intermediates 29-3 Lower Adapters 31 Accessories 32-38 Saw Blades 39 Air Bending Calculation Chart 4
!!!Punches MOVING HORNS FOR COUPLING WITH LISTED MODELS CODE MOVING HORNS.S.1S.64S.6S CODE PUNCH..1.64.6
Punches Cod. α R H T/mt Cod. α R H T/mt. 9.8 66.65.8 9.8 66.65 6.1 88.8 66.65.8 88.8 66.65 6.1 88 3. 65..64 9.25 66.6.6 88.25 66.6 4 11.77 85 3. 65. 3 3 12.6 85.8 66.6.1 85.25 66. 4 4 3 3 6 9 88 85 9 88 Cod. α R H T/mt Cod. α R H.48 9.6 66.4 35.19 9.6 84.15.49 88.6 66.4 35. 88.6 84.15 12.63 9.25 66.35 35 12.64 88.25 66.35 35 4 3 3 6 4 4 3 3 4 T/mt 9 88 9 88 3 8 7 6 4 4 3 6 Cod. α R H T/mt Cod. α R H T/mt.63 88.8 4.65.28 9.6 99.4 12.8 85.8 4.65.29 88.6 99.4 12.6 9.25 99.35 6 12.6 88.25 99.35 3 4 3 4 6 7 8 7 3 6 4 4 3 4 3 4 3 6 7 88 85 9 88
Punches 4 Cod. α R H T/mt 11.76 9.25 89.88 Cod. α R H 11.7 88.8 89.65 3 3 4 T/mt.13 9.8 89.65 6.14 88.8 89.65 6.1 88 3. 88. 6 12.6 9.25 89.6 6 12.66 88.25 89.6 6 6 7 6 7 3 4 3 4 9 88 9 88 Cod. α R H T/mt Cod. α R H T/mt.16 9.8 4.65 11.74 9.25 4.88.17 88.8 4.65 11.73 88.8 4.65.18 88 3. 3. 11.7 85.8 4.6 6 12.67 9.25 4.6 6 12.68 88.25 4.6 4 4 3 3 8 7 7 6 6 4 34 3 8 9 88 9 88 9 88 Cod. α R H T/mt Cod. α R H.6 9.8 1..8 88.8 4.65 45 7.6 88.8 1. 6.6 88 3. 119. 34 4 4 3 3 9 8 8 7 7 6 6 9 4 3 T/mt
Punches Cod. α R H T/mt Cod. α R H.3 88.8 145. 8.3 88.8 165. 6 T/mt 9 8 7 6 4 3 9 8 7 6 4 3 1 1 9 9 8 8 7 7 6 6 34 34 1 88 3 4 Cod. α R H T/mt Cod. α R H T/mt.83 9.6 94.4.31 88.6 167. 3 12.69 9.25 94.35.32 85.8 167. 3.84 88.6 94.4 12.7 88.25 94.35 INTEGRALE FRAZIONABILE SECTIONABLE 4 3 9 8 8 8 7 7 7 6 6 6 4 3 4 3 34 7 6 4 9 3 1 1 9 88 88 85
Punches Cod. α R H T/mt Cod. α R H 6.53 45 6...54 45 6.. 6 4 3 4 3 9 8 8 7 7 6 6 4 3 34 4 3 45 Cod. α R H T/mt Cod. α R H T/mt.3 35. 8. 7.34 35.8 85..47 35.8 9. 12.8 35 1. 9. 7 4 3 T/mt 3 7 6 4 4 3 4 3 34 6 8 7 4 3 6 4 3 4 3 4 3 6 35 35 Cod. α R H T/mt Cod. α R H.56 3. 8. 11.93 3.6 4. T/mt 7 6 3 4 4 3 4 3 4 3 6 9 8 7 6 4 3 4 3 6 4 3 3 34 6 8 7
Punches Cod. α R H T/mt Cod. α R H T/mt.33 26.8 117..57 3 3. 8. 9 8 4 3 7 6 7 6 4 3 7 8 7 6 3 4 3 6 6 4 4 3 34 3 34 26 3 Cod. α R H T/mt Cod. α R H 4. 11.94 3 5. 12.89 3 3. T/mt 6 6 4 4 3 4 3 4 3 3 9 9 8 8 8 8 7 7 7 7 6 6 6 6 4 4 34 34 3 3 3
Punches Cod. α R H T/mt Cod. α R H T/mt.86 3.6 14. 4.5 3. 135..5 3. 5. 4 3 6 7 9 8 7 6 4 3 4 3 6 7 8 7 6 4 3 1 1 9 9 9 9 8 8 8 8 7 7 7 7 6 6 6 6 4 4 3 34 3 34 3 3 9 8 3 7 6 4 Cod. α R H T/mt Cod. α R H 11.78 26.8 117. 12.9 3.. 11.9 26 3. 117. 7 6 6 4 3 7 6 8 9 1 14 34 13 1 1 9 1 1 131 1 9 8 8 7 7 6 6 9 9 4 8 8 3 34 7 7 6 6 4 3 34 26 3 4 1 3 1 13141 T/mt
Dies THE DIES ARE AVAILABLE IN THE FOLLOWING STANDARD LENGTHS: 415 mm ; 835 mm AND SECTIONED 85 mm STANDARD SECTIONING
Dies 9 Cod.. T/m 9 Cod..1 T/m.1 R=.3 R=.5 R=.4 R=.6 R=.5 R=.8 88.46 88.4 Cod..13 T/m R=.8 R=1.2 R=1. R=1.5 R=2.75 R=3. 88 Cod..3 T/m.14 6.1 R=2.75 R=3. R=2.75 R=3. R=.4 R=.6 6.16.33.17 Cod. T/m R=.8 R=1.2 R=.8 R=1.5 R=1.6 R=2. Cod. T/m 3.47.3.19.39.18 R=.8 R=1.5
Dies 9 Cod..48 8 T/m.49 88. R=.3 R=.5 R=.4 R=.6 R=.8 R=1.2 9 Cod..5 8 T/m 88.5.53 R=.5 R=.8 R=1. R=1.5 R=1.25 R=1.5 3 Cod..56 4 T/m Cod..5 8 T/m 88.54 R=.8 R=1.5 R=1.75 R=.8 Cod..6.58 3.57 4 T/mCod..59 R=.6 R=1.
Dies 9.28 Cod..29.3 T/m T/mCod. R=.4 R=.5 R=2. R=1.5 R=.6 R=.8 R=3. 85.67 85 88 Cod..3 8 T/m 6 Cod..34 6 T/m R=2. R=.5 R=2. R=4. R=2. R=3. R=3. R=2. R=2.5 R=2.5 R=.5 R=1.5 8 6 Cod..671 T/m 8 6.672 85. R=2. R=2. R=4. 85.2.2.23 Cod. T/m R=4. R=6.
Dies 85 Cod..24 T/m 6.8.83 R=6. R=5. R=5. 6 Cod..89 T/m 3.86 Cod..87 T/m R=6. R=2. R=3. 45.88 45.8 Cod. 21.18 T/m R=6. R=4. R=4.
Dies 45 Cod.21.17 T/m 45 Cod..84 T/m R=6. R=8. 45 8 Cod..261 T/m.26 T/m R=9. R=9. 8 Cod..2 T/m8 Cod..271 T/m R=11. R=7. 8 8
Dies 9 Cod. 3. T/m 3.1 3.1 3.13 R=.4 R=.5 R=.6 R=.8 9 Cod. 3.14 T/m 88 3.8 Cod. 3.8 T/m Cod. 3.8 T/m R=1. R=.4 R=.5 R=.6 88 Cod. 3.1 T/m 3.16 3.17 Cod. 3.18 T/m R=2.75 R=3.
Dies 6 Cod. 3.19 6 T/m 6 3. 6 T/m 3.2 3.2 R=.4 R=.5 R=.6 R=.8 6 3.23 6 T/m 3.24 3.2 45 Cod. 3.26 T/m R=3. Cod. 3.27 3.28 3.29 45 3.3 T/m R=.8 R=1.5 R=2.
Dies 45 Cod. 3.3 T/m 3.3 3 Cod. 3.4 35 T/m R=2.5 R=3. R=.6 3 Cod. 3.43 35 T/m T/m3.44 3.4 4 T/m R=.8 R=1. R=1.5 3 3.46 45 T/m T/m3.47 Cod. 3.48 T/m R=2. R=2.5
Dies 85 Cod. 3.81 T/m 85 Cod. 3.82 T/m 85 Cod. 3.83 T/m R=.5 R=.5 R=.5 85 3.84 Cod. 3.85 T/m 3.86 R=.5 R=.5 85 Cod. 3.87 T/m
Dies 35 Cod. 3.421 T/m Cod. 3.422 T/m 3.423 35 Cod. 3.424 T/m 35 Cod. 3.425 T/m 35 Cod. 3.426 T/m 35 Cod. 3.427 T/m
Dies 9 Cod. 3. T/m 9 3.5 3.5 3.53 R=.4 R=.5 R=.6 R=.8 R=.5 R=.5 R=.5 R=.5 9 3.54 88 3.83 88 3.84 Cod. 3.8 T/m R=1. R=.4 R=.5 R=.6 R=.5 R=.5 R=.5 R=.5 88 Cod. 3.5 T/m 3.56 3.57 3.58 R=2.75 R=2.75 R=3. R=3. R=.5 R=.5 R=.5 R=.5
Dies 35 Cod. 3.731 T/m Cod. 3.732 T/m 3.733 35 Cod. 3.734 T/m 35 Cod. 3.735 T/m 35 Cod. 3.736 T/m 35 Cod. 3.737 T/m
Holders HOLDER FOR INSERTED DIES Cod.31.73 L=835 L=415
Dies Amada 88 AM.84 AM.86 AM.88 Cod. AM.8 T/m Cod.AM.812 AM.816 AM.888 AM.82 T/m 3 AM.36 35 T/m 3 AM.38 AM.3 T/m Cod. AM.312 4 T/m Cod.AM.316 45 T/m AM.3 3 AM.325 T/m
Flattening tool 35 Cod. 3.37/6 6 T/m 35 3.37/8 6 T/m 3.39 8 T/m thickness / MAX R=1. thickness 12/ MAX thickness / MAX R=1. 3 Cod. 3.4 8 T/m 26 3.38 T/m 26 Cod.3.4 T/m thickness 15/ MAX thickness from15/ to 25/ R=1.5 thickness from15/ to 3/ R=1.5 MATERIAL - ACC.R ~ 4 Kg/mm² MATERIAL - ACC.R ~ 7 Kg/mm² S( mm ) ( t/m ) T( mm ) 2S( mm ) S( mm ) ( t/m ) T( mm ) 2S( mm ).6.8 1. 1.25 1.5 2. 2.5 3. 9 12 15 17 22 3 55 7 3 3 3.5 3.5 4.6 5.5 6.5 8. 23 32 4 63 8 9 1.2 1.6 2. 2.5 3. 4. 5. 6..6.8 1. 1.25 1.5 2. 15 25 26 38 3 3 3.5 3.5 4.6 5.5 35 6 8 95 1.2 1.6 2. 2.5 3. 4.
Flattening tool L=835 L=415 L=85 S 28 Cod. 11.9 8 T/m 24 11.96 8 T/m 11.97 8 T/mCod. Cod. 31.76 T/m 31.77 T/m Cod.31.78 T/m
Adapters LVD WILA/TRUMPF WEINBRENNER Cod.41.43 L = 1 mm 41.9 Cod.42.1 BEYELER - R S RFA Cod.41.9 L = 1 mm Cod.41.93 Cod.42.14 L = 1 mm
Intermediates Adjustable intermediates Cod.42.2 H = mm 3.8kg 42.24 3.5kg Cod. 42.2 H = 1 mm 4.8kg Cod. 42.2 H = 1 mm 4.5kg Cod. 42.23 H = 1 mm 5.8kg
Clamps Cod. 4.16 Cod..13 Staffa / Clamp H = mm H = 43 mm.4kg.4kg Cod. 4. H = 6 mm 41.99 Cod..1 H = 52 mm Staffa di sicurezza / Safety clamp con inserto in poliuretano.8kg.8kg Cod. 4.2 H = 6 mm 42.19.8kg Cod..1 H = 52 mm.8kg Staffa con levetta ed inserto in poliuretano Quick clamp with poliurethane Staffa con levetta / Quick clamp.8kgcod. 4.9 H = 6 mm Cod. 42. H = 6 mm.8kg Staffa di sicurezza / Safety clamp Staffa con levetta a scomparsa ed inserto in poliuretano Quick clamp with poliurethane
Lover adapters Cod. 43. AMADA-BEYELER/TRUMPF L = mm L = mm Cod.43. L = mm L = mm AMADA-BEYELER/TRUMPF Cod.43.3 BEYELER/TRUMPF-AMADA L = 835 mm L = 835 mm Cod.43.4 L = 415 mm L = 415 mm LVD - AMADA Cod.43. L = mm Cod. 4.33 L = 835 mm L = mm Cod. 4. L = 835 mm LVD - BEYELER/TRUMPF 22kg 28kg AMADA LOWER ADAPTOR
Accessories LVD 14.6Cod. T/m JOGGLE Z TOOL HOLDER AND INSERT AMADA/PROMECAM Cod. 11. T/m WILA/TRUMPF 12.4 T/m L=835 L=415 L=835 L=415 T/m α α α α Cod. Z α Cod. Z α 11.37 4. Cod. Z Cod. Z 11.3 1. 12.76 1. 11.38 5. 11.4 9. 12.78 13. 16 11.31. 12.77 1. 11.39 5. 11.46. 12.7914. 9 9 11.3 2. 1 12.74 2. 11.4 6. 11.4711. 12.815. 11.33 2. 14 12.7 2. 9 11.4 6. 9 11.4812. 11.34 3. 11.3 3. 11.36 4. 11.4 7. 11.43 7. 11.44 8.
Accessories JOGGLE Z TOOL HOLDER AND INSERT BEYELER - RFA Cod. 12.998 T/m L=835 L=415 11.551 R BEYELER - S EURO - BEYELER Cod. 11.552 T/m Cod. 11.553 T/m L=835 L=415
Accessories AMADA PROMECAM STYLE 11.5 8 T/m.36 8 T/mCod..96 8 T/m HOLDER FOR RADIUS INSERTS L=835 L=415 L=835 L=415 A R=3. Min R=4.5 B R=5. Min R=6.5.9 8 T/m Cod..9 8 T/m L=835 L=415
Accessories RADIUS TOOL L=835 L=415 Cod. 11.8 11.8 11.8 11.83 11.84 11.8 11.86 11.87 R 3. 3.5 4. 4.5 5. 5.5 6. 6.5 Cod. 42.7 Spare part L=835 Cod. R A L=415 11. 7. 11.5 11. 7. 11.5.43Cod. 11. 8. 13. 11.3 9. 16..37. 16. FLATTENING INSERT 11.4 16. 11. 11.5 16. 11.6 12.. L=835 L=415 Cod. R A B 11.7 12.516. 21. 11.8 13.17. 23. 11.9 14.19. 25..38 15.. 27. 11. 16.21. 28. 11.1 17.21.5 31.5.39 17.522. 32. 11.1 19.25. 32..4.24. 34. 11.13 22.525. 33..4 25.29. 39. 11.14 27.534. 44..4 3.34. 44. 11.1 35.45. 55. 11.16 4.45. 55. 11.17 45.. 6. 11.18.54. 64. Cod. 42.74 Spare part
Accessories L=835 L=415 HOLDERS AND INSERTS IN POLYURETHANE Cod..36 21. 21. Cod..37 21. 21.6 Cod..38 21.3 21.7 Cod..4 21.4 21.8
HOLDER FOR INTERCHANGEABLE PLASTIC INSERTS Accessories Cod. 21.9 T/m 21. L=835 L=415 Cod. 21.1 T/m 21.1 H= L=835 Cod. 21.16 H=95 L=415 T/m
INTERCHANGEABLE PLASTIC INSERTS Accessories Spessore Largh. Lungh. Cod. Thickness Width Width 43.8.8 mm 95mm33 m 43.14.5 mm 95mm33 m A 88 6 45 3 21.1 21.1 T/m V 6 8 6 8 6 8 6 8 L=835 L=415 FILM OF POLYURETHANE ANTISCRATCH 21.13 T/m A 88 6 45 3 21.13 V 6 8 12 16 6 8 12 16 6 8 12 6 8 21.14 T/m A 88 6 21.14 V 12 16 25 6 6 8 12 16 45 6 8 12 16 3 6 8 12 16
CALCULATION FOR AIR BENDING