PRICE LIST EB.13 PIPE AND FITTINGS FOR BUTT WELDING
Since 1954 FIP produces injection moulded valves and fittings in thermoplastic materials for pressure pipeline systems thus becoming nowadays the largest European valves manufacturer. FIP is a company of the Aliaxis Group: a worldwide industrial holding, gathering together a series of companies manufacturing and marketing plastic plumbing products for building, industrial and public utilities applications. FIP products are manufactured on EU production sites, operating to the Quality Assurance System in compliance with ISO 9001 and with the Environmental Management System ISO 14001 standards requirements. Moulded in FIP products there are over 50 years of know-how powered by a strong quest for innovation. Product manager PVC-U Manual & Actuated valves - Lucia Cambiaso Tel. +39 010 9621 266 PVC-C Manual & Actuated valves - Mauro Nobile Tel. +39 010 9621 414 & PVDF Manual & Actuated valves- Silvia Porcile Tel. +39 010 9621 267 Variable area flowmeters - Alberto Claveri Tel. +39 010 9621 340 PVC-U & PVC-C fittings - Mauro Nobile Tel. +39 010 9621 414 PE, & PVDF fittings - Silvia Porcile Tel. +39 010 9621 267 PP Compression fittings MAGNUM System & Clamp saddles - Stefano Carrea Tel. +39 010 9621 255 Technical Support technical.fip@aliaxis.com Company Certificates Cert. N 1 in compliance with the Standard UNI EN ISO 9001 Cert. N 70 in compliance with the Standard UNI EN ISO 14001 CE Conformity CE conformity according to European directives EC/2104/68. R00-02-2017 2
INDEX General info How to read FIP BW Fittings Commercial Codes Reference standards Approvals and quality marks ISO-UNI PIPE page 4 page 6 page 8 PIPE AND FITTINGS FOR BUTT WELDING Pressure pipe page 10 Fittings for Butt Welding - Equal ends Fittings for Butt Welding - Cap Fittings for Butt Welding - Unions Fittings for Butt Welding - Reducers Fittings for Butt Welding - Stubs Flanges - ISO-DIN series Flanges - ANSI series page 12 page 15 page 16 page 19 page 22 page 24 page 26 ISO-BSP FITTINGS Adaptors for Butt Welding page 29 Packaging Information Conditions of supply page 30 page 31 3
CODES HOW TO READ FIP BW FITTINGS COMMERCIAL CODES Ex: BBMC11050E Union for butt welding SDR11 short spigot d50, EPDM O-Ring B TYPE OF FITTINGS B JOINT SYSTEM M MATERIALS B Socket union I ISO socket (metric) M C End cap D ISO spigot (metric) B PP-Steel D Reducer bush B ISO butt welding (metric) E Ringnut G JIS socket threaded (inch) G 90 elbow P Hose adaptor (metric) F/B Union bush F BSP female threaded (inch) H 45 elbow R BSP male threaded (inch) K Transition fitting L BS female (inch) O Free flange M BS male (inch) Q Stub A ASTM socket (inch) Q/B Union end connector Y ASTM spigot (inch) R Reduction N NPT socket threaded (inch) T 90 tee J JIS socket (inch) TR 90 tee with reduced offtake O ISO-DIN flanged (metric) 4
C SPIGOT 11 Std DIM RATIO METRIC SERIES d (mm) 050 SIZE INCH SERIES d/r (inches) E SEAL MATERIAL L long spigot 11 SDR11 006 6 E EPDM C short spigot 17 SDR17,9 008 8 F FPM 010 10 N NBR 012 12 014 1/4 P PTFE 016 16 038 3/8 020 20 012 1/2 025 25 034 3/4 032 32 100 1 040 40 114 1 1/4 050 50 112 1 1/2 063 63 200 2 214 2 1/4 075 75 212 2 1/2 234 2 3/4 090 90 300 3 110 110 400 4 125 125 140 140 500 5 160 160 600 6 180 180 200 200 225 225 800 8 250 250 280 280 810 10 315 315 812 12 355 355 400 400 5
REFERENCE STANDARDS Production of the (100) lines is carried out according to the highest quality standards and in full compliance with the environmental restrictions set by the applicable laws in force and in accordance with ISO 14001. All products are made in accordance with the quality guarantee system in compliance with ISO 9001. ANSI B16.5 cl.150 Pipe, flanges and stubs - NPS 1/2 to NPS 24 mm / inch. ASTM D 4101-06 Polypropylene compound according to the classification PP0110B56000. BS 10 Specification for flanges and bolts for pipes, valves and fittings. BS 1560 Flanges for pipes, valves and fittings (Class designated). Steel, cast iron and copper alloy flanges. Specification for steel flanges. BS 4504 Flanges for pipes, valves and fittings (PN designated). DIN 2501 Flanges, dimensions. DIN 2999 Whitworth thread for threaded pipes and fittings. DIN 8077-8078 pipe dimensions, metric series. DIN 16962 fittings for socket and butt welding, dimensions. DIN 16963 Pipe joints and pipe components for pressurised fluids in HDPE. DVS 2202-1 Imperfections of welded joints, characteristics, descriptions and evaluations. DVS 2207-11 Socket and butt welding of components. DVS 2208-1 Machinery and equipment for thermocouple welding pipes, pipe parts and panels. EN 558-1 Industrial valves - Overall dimensions of metal valves for use in flanged pipe systems - Part 1: PN designated valves EN 1092-1 Flanges and their joints - Circular flanges for pipes, fittings, valves and accessories - Part 1: Steel flanges, PN designated. EN ISO 15494 Specifications for components (Pipes, Fittings and Valves) in for industrial applications. ISO 228-1 Pipe threads for connections that do not seal in the thread. ISO 5211 Part-turn actuator couplings. ISO 7005-1 Metal flanges; part 1: steel flanges. 6
JIS B 2220 Steel pipe flanges. UNI 11318 Socket welding of components. UNI 11397 Butt welding of components. EB.13 7
APPROVALS AND QUALITY MARKS DIBt FIP valves have been tested and certified by DIBt (Deutsches Institut für Bautechnik) GOST-R - EAC FIP valves are GOST-R and EAC certified in accordance with Russian regulations on Safety, Hygiene and Quality RINA FIP valves have been recongnised as suitable for conveying, treating domestic and air conditioning waters on board ships and other units classified by RINA. TA-Luft TA-Luft FIP valves have been tested and certified according to TA-Luft by MPA Stuttgart in compliance with the Technical Instruction on Air Quality Control TA-Luft/ VDI 2440 UKR SEPRO FIP valves and fittings are certified in accordance with Ukrainian regulations on Safety and Quality 8
PIPE ISO-UNI Pressure pipes for connection system by butt or socket welding. PRESSURE PIPE Technical specifications Size range d 20 d 400 (mm) Nominal pressure SDR 17,6 (PN6) with water at 20 C SDR 11 (PN10) with water at 20 C Temperature range 0 C 100 C Coupling standards Welding: EN ISO 15494 Can be coupled to pipes according to EN ISO 15494 Reference standards Construction criteria: EN ISO 15494 Test methods and requirements: EN ISO 15494 Installation criteria: DVS 2202-1, DVS 2207-11, DVS 2208-1, UNI 11318, UNI 11397 Material EB.13 9
ISO-UNI PIPE PRESSURE PIPE PIPE Pipe according to DIN 8077/8078, Beige - RAL 7032, standard length 5m d DN S mm kg/m PN6 code SDR 17,6 - S 8,3 32 25 1,9 0,17 PIPEM17032 2,38 - - - 40 32 2,3 0,27 PIPEM17040 2,78 - - - 50 40 2,9 0,42 PIPEM17050 4,19 - - - 63 50 3,6 0,66 PIPEM17063 6,25 - - - 75 65 4,3 0,94 PIPEM17075 8,82 - - - 90 80 5,1 1,33 PIPEM17090 12,51 - - - 110 100 6,3 1,99 PIPEM17110 18,29 - - - 125 100 7,1 2,55 PIPEM17125 24,85 - - - 140 125 8,0 3,20 PIPEM17140 30,47 - - - 160 150 9,1 4,17 PIPEM17160 38,89 - - - 180 150 10,2 5,25 PIPEM17180 51,52 - - - 200 200 11,4 6,50 PIPEM17200 61,54 - - - 225 200 12,8 8,19 PIPEM17225 80,45 - - - 250 250 14,2 10,10 PIPEM17250 100,96 - - - 280 250 15,9 12,60 PIPEM17280 123,78 - - - 315 300 17,9 16,00 PIPEM17315 157,36 - - - 355 350 20,1 20,30 PIPEM17355 234,30 - - - 400 400 22,7 25,70 PIPEM17400 295,23 - - - /m pack d DN S mm kg/m PN10 code 20 15 1,9 0,11 PIPEM11020 1,55 - - - 25 20 2,3 0,16 PIPEM11025 2,17 - - - 32 25 2,9 0,26 PIPEM11032 3,03 - - - 40 32 3,7 0,41 PIPEM11040 3,94 - - - 50 40 4,6 0,64 PIPEM11050 5,87 - - - 63 50 5,8 1,01 PIPEM11063 9,25 - - - 75 65 6,8 1,41 PIPEM11075 13,07 - - - 90 80 8,2 2,03 PIPEM11090 18,59 - - - 110 100 10,0 3,01 PIPEM11110 27,55 - - - 125 100 11,4 3,91 PIPEM11125 36,31 - - - 140 125 12,8 4,87 PIPEM11140 45,68 - - - 160 150 14,6 6,38 PIPEM11160 58,17 - - - 180 150 16,4 8,07 PIPEM11180 79,13 - - - 200 200 18,2 10 PIPEM11200 96,02 - - - 225 200 20,5 12,60 PIPEM11225 122,02 - - - 250 250 22,7 15,50 PIPEM11250 155,26 - - - 280 250 25,4 19,40 PIPEM11280 187,26 - - - 315 300 28,6 24,60 PIPEM11315 241,63 - - - 355 350 32,2 31,20 PIPEM11355 366,50 - - - 400 400 36,3 40 PIPEM11400 462,29 - - - /m pack 10
FITTINGS ISO-UNI Series of fittings designed for conveying fluids under pressure with a weld connection system (butt welding). FITTINGS FOR BUTT WELDING, METRIC SERIES Technical specifications Size range d 20 d 630 (mm) Nominal pressure SDR 17, 6 (PN6) with water at 20 C SDR 11 (PN10) with water at 20 C Temperature range 0 C 100 C Coupling standards Welding: EN ISO 15494 Can be coupled to pipes according to EN ISO 15494 Flanging system: ISO 7005-1, EN 1092-1, EN ISO 15494, DIN 2501, ANSI B16.5 cl.150 Reference standards Construction criteria: EN ISO 15494 Test methods and requirements: EN ISO 15494 Installation criteria: DVS 2202-1, DVS 2207-11, DVS 2208-1,UNI 11397 Fitting material Seal material EPDM, FPM EB.13 11
FITTINGS FOR BUTT WELDING - EQUAL ENDS GBM Bend 90 short spigot for butt welding d PN6 code SDR 17,6 - S 8,3 PN10 code 20 - - GBM11020 3,32 - - - 25 - - GBM11025 3,47 - - - 32 - - GBM11032 3,59 - - - 40 - - GBM11040 4,65-50 K03 50 GBM17050 5,57 GBM11050 5,86-30 K10 63 GBM17063 7,72 GBM11063 8,36-15 K03 75 GBM17075 11,29 GBM11075 11,53-10 K10 90 GBM17090 14,73 GBM11090 16,75-10 K05 110 GBM17110 31,03 GBM11110 31,85-10 K12 125 GBM17125 39,45 GBM11125 44,88-5 K06 140 GBM17140 57,29 GBM11140 59,99-5 K17 160 GBM17160 61,43 GBM11160 73,08-5 K18 180 GBM17180 78,11 GBM11180 86,54-2 K17 200 GBM17200 96,72 GBM11200 128,97-1 K06 225 GBM17225 119,22 GBM11225 153,83-1 K12 250 GBM17250 201,35 GBM11250 296,10-1 K18 280 GBM17280 261,66 GBM11280 385,00-1 K18 315 GBM17315 361,48 GBM11315 531,51-1 K19 355 GBM17355 658,75 GBM11355 894,07 1 1 01 400 GBM17400 917,31 GBM11400 1227,78-1 - 12
FITTINGS FOR BUTT WELDING - EQUAL ENDS HBM Bend 45 long spigot for butt welding d PN6 code SDR 17,6 - S 8,3 PN10 code 20 - - HBM11020 3,13 - - - 25 - - HBM11025 3,25 - - - 32 - - HBM11032 3,38 - - - 40 - - HBM11040 4,36 - - - 50 - - HBM11050 5,49 - - - 63 HBM17063 7,29 HBM11063 7,89 - - - 75 HBM17075 10,63 HBM11075 10,87 - - - 90 HBM17090 13,87 HBM11090 15,74 - - - 110 HBM17110 29,23 HBM11110 29,99 - - - 125 HBM17125 37,13 HBM11125 42,26 - - - 140 HBM17140 53,94 HBM11140 56,49 - - - 160 HBM17160 59,49 HBM11160 68,83 - - - 180 HBM17180 95,70 HBM11180 106,45 - - - 200 HBM17200 130,92 HBM11200 145,47 - - - 225 HBM17225 156,18 HBM11225 173,41 - - - 250 HBM17250 302,24 HBM11250 335,84 - - - 280 HBM17280 456,40 HBM11280 507,10 - - - 315 HBM17315 567,96 HBM11315 634,48 - - - EB.13 13
FITTINGS FOR BUTT WELDING - EQUAL ENDS TBM Equal tee 90 short spigot for butt welding d PN6 code SDR 17,6 - S 8,3 PN10 code 20 - - TBM11020 2,65-30 K07 25 - - TBM11025 2,65-30 K01 32 - - TBM11032 3,33-20 K01 40 - - TBM11040 5,32 - - - 50 TBM17050 6,56 TBM11050 7,18-10 K02 63 TBM17063 8,65 TBM11063 11,14-10 K04 75 TBM17075 17,65 TBM11075 22,41-10 K06 90 TBM17090 25,19 TBM11090 33,46-10 K12 110 TBM17110 41,81 TBM11110 49,16-5 K12 125 TBM17125 57,93 TBM11125 67,70-5 K17 140 TBM17140 68,39 TBM11140 85,76-4 K17 160 TBM17160 128,59 TBM11160 144,27-2 K17 180 TBM17180 157,95 TBM11180 184,90-1 K13 200 TBM17200 215,68 TBM11200 264,93-1 K18 225 TBM17225 253,19 TBM11225 315,13-1 K18 250 TBM17250 336,04 TBM11250 400,91-1 K19 280 TBM17280 379,81 TBM11280 542,03-1 K20 315 TBM17315 505,18 TBM11315 769,99-1 K20 355 TBM17355 873,55 TBM11355 1034,87 1 1 00 400 TBM17400 1193,98 TBM11400 1545,21 1 1 00 14
FITTINGS FOR BUTT WELDING - CAP CBM End Cap long spigot for butt welding d PN6 code SDR 17,6 - S 8,3 PN10 code 20 - - CBM11020 4,31 - - - 25 - - CBM11025 4,74 - - - 32 - - CBM11032 5,98 - - - 40 - - CBM11040 7,43 - - - 50 - - CBM11050 9,69 - - - 63 CBM17063 12,79 CBM11063 12,79-10 K01 75 CBM17075 19,80 CBM11075 19,80-5 K01 90 CBM17090 30,05 CBM11090 30,05-4 K01 110 CBM17110 40,74 CBM11110 40,74-4 K03 125 CBM17125 47,90 CBM11125 44,03 1 4 05 140 CBM17140 55,07 CBM11140 55,07 1 4 05 160 CBM17160 61,71 CBM11160 61,71 1 3 05 180 CBM17180 80,24 CBM11180 80,24 1 2 04 200 CBM17200 99,95 CBM11200 99,95 1 2 04 225 CBM17225 119,29 CBM11225 119,30-2 - 250 CBM17250 152,08 CBM11250 152,08 1 2-280 CBM17280 215,51 CBM11280 215,51-2 - 315 CBM17315 287,79 CBM11315 287,79-2 - 355 - - CBM11355 316,71 - - - 400 - - CBM11400 434,18 - - - EB.13 15
FITTINGS FOR BUTT WELDING - UNIONS BBM-L Complete Union long spigot for butt welding, with oring in EPDM or FPM d EPDM code FPM code 20 BBML11020E 17,00 BBML11020F 19,00-10 K01 25 BBML11025E 21,16 BBML11025F 23,81-10 K02 32 BBML11032E 21,79 BBML11032F 24,09-10 K02 40 BBML11040E 30,90 BBML11040F 36,47-10 K03 50 BBML11050E 38,63 BBML11050F 44,66-10 K04 63 BBML11063E 50,69 BBML11063F 57,63-5 K04 Q/BBM-L Union End long spigot for butt welding, for BBM-L union d PN10 code 20 QBBML11020 4,49-30 K07 25 QBBML11025 5,40-30 K01 32 QBBML11032 6,65-30 K01 40 QBBML11040 8,65-30 K02 50 QBBML11050 9,12-25 K02 63 QBBML11063 13,13-15 K02 75 QBBML11075 18,64-10 K03 90 QBBML11090 20,80-5 K04 110 QBBML11110 27,06-5 K05 16
FITTINGS FOR BUTT WELDING - UNIONS F/BMM-L Union Bush long spigot for butt welding d R 1 PN10 code 20 1" FBBML11020 7,82-30 K01 25 1"1/4 FBBML11025 9,80-30 K01 32 1"1/2 FBBML11032 9,80-30 K02 40 2" FBBML11040 14,57-30 K03 50 2"1/4 FBBML11050 14,57-25 K04 63 2"3/4 FBBML11063 17,25-15 K03 75 3"1/2 FBBML11075 22,07-10 K03 90 4" FBBML11090 28,24-5 K04 110 5" FBBML11110 32,30-5 K05 EB.13 BBM-C Complete Union short spigot for butt welding, with oring in EPDM or FPM d EPDM code FPM code 20 BBMC11020E 17,00 BBMC11020F 19,00 10 100 04 25 BBMC11025E 21,16 BBMC11025F 23,81 10 60 04 32 BBMC11032E 21,79 BBMC11032F 24,09 10 40 04 40 BBMC11040E 30,90 BBMC11040F 36,47 5 30 04 50 BBMC11050E 38,63 BBMC11050F 44,66 5 20 04 63 BBMC11063E 50,69 BBMC11063F 57,63 5 10 04 17
FITTINGS FOR BUTT WELDING - UNIONS Q/BBM-C Union End short spigot for butt welding, for BBM-C union d PN10 code 20 QBBMC11020 4,49-30 K07 25 QBBMC11025 5,70-30 K01 32 QBBMC11032 5,70-30 K01 40 QBBMC11040 9,58-30 K02 50 QBBMC11050 9,58-25 K02 63 QBBMC11063 10,51-15 K02 75 QBBMC11075 14,38 - - K02 90 QBBMC11090 19,63 - - K02 110 QBBMC11110 25,53 - - K05 F/BBM-C Union Bush short spigot for butt welding, for BBM-C union d R 1 PN10 code 20 1" FBBMC11020 6,79-30 K07 25 1"1/4 FBBMC11025 8,51-30 K01 32 1"1/2 FBBMC11032 8,51-30 K01 40 2" FBBMC11040 12,66-30 K02 50 2"1/4 FBBMC11050 12,66-25 K02 63 2"3/4 FBBMC11063 14,99-15 K02 75 3"1/2 FBBMC11075 20,45 - - K01 90 4" FBBMC11090 26,72 - - K03 110 5" FBBMC11110 32,61-5 K04 18
FITTINGS FOR SOCKET WELDING - REDUCERS RBM Concentric reducer short spigot for butt welding d 1 d 2 PN6 code SDR 17,6 - S 8,3 PN10 code 25 20 - - RBM11025020 4,43-30 K07 32 20 - - RBM11032020 5,12-30 K07 32 25 - - RBM11032025 5,12-30 K01 40 20 - - RBM11040020 5,88-25 K07 40 25 - - RBM11040025 5,88-25 K07 40 32 - - RBM11040032 5,88-25 K07 50 25 - - RBM11050025 6,14-25 K01 50 32 RBM17050032 5,88 RBM11050032 6,14-25 K01 50 40 RBM17050040 5,88 RBM11050040 6,14-25 K01 63 32 RBM17063032 7,05 RBM11063032 7,46-15 K01 63 40 RBM17063040 7,05 RBM11063040 7,46-15 K01 63 50 RBM17063050 7,05 RBM11063050 7,46-15 K01 75 32 RBM17075032 9,12 RBM11075032 9,55-5 K08 75 40 RBM17075040 9,12 RBM11075040 9,55-5 K08 75 50 RBM17075050 9,12 RBM11075050 9,55-5 K08 75 63 RBM17075063 9,12 RBM11075063 9,55-5 K08 90 50 RBM17090050 10,16 RBM11090050 10,60-5 K08 90 63 RBM17090063 10,16 RBM11090063 10,60-5 K08 90 75 RBM17090075 10,16 RBM11090075 10,60-5 K08 110 50 RBM17110050 12,93 RBM11110050 13,55-5 K02 110 63 RBM17110063 12,93 RBM11110063 13,55-5 K02 110 75 RBM17110075 12,93 RBM11110075 13,55-5 K02 110 90 RBM17110090 12,93 RBM11110090 13,55-5 K03 125 63 RBM17125063 16,62 RBM11125063 17,39-5 K03 125 75 RBM17125075 16,62 RBM11125075 17,39-5 K03 125 90 RBM17125090 16,62 RBM11125090 17,39-5 K03 125 110 RBM17125110 16,62 RBM11125110 17,39-5 K04 140 75 RBM17140075 20,11 RBM11140075 21,09-4 K03 140 90 RBM17140090 20,11 RBM11140090 21,09-4 K03 140 110 RBM17140110 20,11 RBM11140110 21,09-4 K04 140 125 RBM17140125 20,11 RBM11140125 21,09-4 K04 160 90 RBM17160090 23,49 RBM11160090 24,72-4 K04 160 110 RBM17160110 23,49 RBM11160110 24,72-4 K10 160 125 RBM17160125 23,49 RBM11160125 24,72-4 K10 160 140 RBM17160140 23,49 RBM11160140 24,72-4 K09 180 90 RBM17180090 36,90 RBM11180090 38,78-2 K03 180 110 RBM17180110 34,76 RBM11180110 36,50-2 K03 180 125 RBM17180125 32,08 RBM11180125 33,67-2 K03 180 140 RBM17180140 30,42 RBM11180140 31,96-2 K03 180 160 RBM17180160 29,01 RBM11180160 30,49-2 K03 200 140 RBM17200140 83,22 RBM11200140 87,31-2 K05 200 160 RBM17200160 73,59 RBM11200160 77,22-2 K05 200 180 RBM17200180 65,81 RBM11200180 69,14-2 K05 225 140 RBM17225140 99,34 RBM11225140 104,34-2 K09 EB.13 19
FITTINGS FOR SOCKET WELDING - REDUCERS d 1 d 2 PN6 code SDR 17,6 - S 8,3 PN10 code 225 160 RBM17225160 85,25 RBM11225160 89,50-2 K09 225 180 RBM17225180 81,21 RBM11225180 85,22-2 K09 225 200 RBM17225200 71,52 RBM11225200 75,10-2 K06 250 160 RBM17250160 113,89 RBM11250160 119,54-1 K04 250 180 RBM17250180 105,33 RBM11250180 110,58-1 K04 250 200 RBM17250200 96,93 RBM11250200 101,77-1 K04 250 225 RBM17250225 91,91 RBM11250225 96,42-1 K04 280 200 RBM17280200 126,76 RBM11280200 133,16-1 K09 280 225 RBM17280225 118,20 RBM11280225 124,15-1 K09 280 250 RBM17280250 115,10 RBM11280250 119,54-1 K09 315 200 RBM17315200 161,81 RBM11315200 169,90-1 K12 315 225 RBM17315225 143,13 RBM11315225 150,33-1 K12 315 250 RBM17315250 130,44 RBM11315250 136,92-1 K12 315 280 RBM17315280 122,15 RBM11315280 128,29-1 K12 355 200 RBM17355200 175,90 RBM11355200 184,66-1 - 355 225 RBM17355225 169,10 RBM11355225 177,54-1 - 355 250 RBM17355250 162,23 RBM11355250 170,31-1 - 355 280 RBM17355280 150,50 RBM11355280 158,04-1 - 355 315 RBM17355315 145,95 RBM11355315 153,23-1 - 400 225 RBM17400225 740,78 RBM11400225 789,18-1 - 400 250 RBM17400250 643,53 RBM11400250 723,85-1 - 400 280 RBM17400280 570,74 RBM11400280 570,88-1 - 400 315 RBM17400315 442,15 RBM11400315 442,15-1 - 400 355 RBM17400355 299,10 RBM11400355 302,29-1 - TRBM Equal Tee 90 with reduced branch short spigot for butt welding d 1 d 2 PN6 code SDR 17,6 - S 8,3 PN10 code *63 50 TRBM17063050 16,66 TRBM11063050 18,03 - - *75 32 - - TRBM11075032 28,23 - - - *75 50 TRBM17075050 25,26 TRBM11075050 28,23 - - - *75 63 TRBM17075063 25,68 TRBM11075063 28,76 - - - 90 32 - - TRBM11090032 35,69 - - - 90 50 - - TRBM11090050 36,67 - - - *90 63 TRBM17090063 35,93 TRBM11090063 40,21 - - - *90 75 TRBM17090075 36,24 TRBM11090075 40,51 - - - 110 32 - - TRBM11110032 52,66 - - - 110 50 - - TRBM11110050 53,75 - - - *110 63 TRBM17110063 53,29 TRBM11110063 59,62 - - - *110 75 TRBM17110075 53,29 TRBM11110075 59,62 - - - *110 90 TRBM17110090 54,55 TRBM11110090 60,44 - - - 125 63 TRBM17125063 - TRBM11125063 75,21 - - - *125 90 - - TRBM11125090 82,92 - - - *125 110 TRBM17125110 74,01 TRBM11125110 82,92 - - - 140 63 TRBM17140063 73,24 TRBM11140063 94,34 - - - 140 75 TRBM17140075 73,59 TRBM11140075 94,34 - - - 20
FITTINGS FOR SOCKET WELDING - REDUCERS d 1 d 2 PN6 code SDR 17,6 - S 8,3 PN10 code 140 90 TRBM17140090 74,77 TRBM11140090 95,86 - - - 140 110 TRBM17140110 76,31 TRBM11140110 95,86 - - - *160 63 TRBM17160063 146,66 TRBM11160063 163,02 - - - *160 75 TRBM17160075 151,15 TRBM11160075 164,38 - - - *160 90 TRBM17160090 151,15 TRBM11160090 164,38 - - - *160 110 TRBM17160110 152,56 TRBM11160110 164,38 - - - 160 125 TRBM17160125 142,29 TRBM11160125 159,09 - - - 180 63 TRBM17180063 168,94 TRBM11180063 197,52 - - - 180 75 TRBM17180075 168,94 TRBM11180075 197,52 - - - *180 90 TRBM17180090 203,90 TRBM11180090 225,94 - - - 180 110 TRBM17180110 174,10 TRBM11180110 225,94 - - - 180 125 TRBM17180125 174,10 TRBM11180125 203,85 - - - *180 160 TRBM17180160 203,90 TRBM11180160 225,94 - - - *200 63 TRBM17200063 230,53 TRBM11200063 283,23 - - - *200 90 TRBM17200090 233,10 TRBM11200090 286,23 - - - *200 110 TRBM17200110 235,68 TRBM11200110 289,18 - - - *200 125 TRBM17200125 238,08 TRBM11200125 292,39 - - - *200 160 TRBM17200160 241,07 TRBM11200160 295,56 - - - *225 75 TRBM17225075 344,12 TRBM11225075 381,97 - - - *225 90 TRBM17225090 344,12 TRBM11225090 381,97 - - - *225 110 TRBM17225110 345,28 TRBM11225110 383,52 - - - 225 125 TRBM17225125 276,83 TRBM11225125 343,90 - - - *225 160 TRBM17225160 346,23 TRBM11225160 384,87 - - - *225 180 TRBM17225180 346,82 TRBM11225180 386,20 - - - 250 110 TRBM17250110 363,17 TRBM11250110 453,90 - - - 250 160 TRBM17250160 370,55 TRBM11250160 463,24 - - - EB.13 *long spigot 21
FITTINGS FOR BUTT WELDING - STUBS QBM Stub flange short spigot, for butt welding for ODB ISO/DIN backing rings d PN6 code SDR 17,6 - S 8,3 PN10 code 20 - - QBM11020 3,01 - - - 25 - - QBM11025 3,01 - - - 32 - - QBM11032 3,57 - - - 40 QBM17040 4,08 QBM11040 4,25-30 K03 50 QBM17050 4,80 QBM11050 5,22-25 K03 63 QBM17063 5,86 QBM11063 6,49-15 K03 75 QBM17075 6,92 QBM11075 7,72-10 K03 90 QBM17090 10,11 QBM11090 11,03-5 K03 110 QBM17110 12,85 QBM11110 14,21-5 K10 125 QBM17125 15,78 QBM11125 17,12-5 K10 140 QBM17140 18,36 QBM11140 20,00-4 K10 160 QBM17160 22,69 QBM11160 25,22-4 K11 180 QBM17180 33,15 QBM11180 39,16-3 K11 200 QBM17200 41,43 QBM11200 43,09-2 K09 225 QBM17225 46,43 QBM11225 48,02-2 K09 250 QBM17250 66,36 QBM11250 72,90-1 K11 280 QBM17280 72,90 QBM11280 79,62-1 K11 315 QBM17315 88,98 QBM11315 93,81-1 K11 355 QBM17355 175,39 QBM11355 191,55 1 1-400 QBM17400 354,46 QBM11400 377,32 1 1-22
FITTINGS FOR BUTT WELDING - STUBS QBM special stub flange for FE/FK Chamfered stub flange short spigot for butt welding, to be used with FE/FK butterfly valves Valve d Pipe d PN6 code SDR17,6 PN10 code SDR11 50 50 QPM17050 6,03 QPM11050 6,55 - - - 63 63 QPM17063 7,35 QPM11063 8,11 - - - 75 75 QBM17075 6,92 QBM11075 7,72-10 - 90 90 QBM17090 10,11 QBM11090 11,03-5 - 110 110 QPM17110 16,15 QPM11110 18,43 - - - 140 125 QPM17125 19,75 QPM11125 21,50 - - - 160 140 QPM17140 22,95 QPM11140 25,10 - - - 160 160 QPM17160 28,44 QBM11FK160 48,63 - - - 160 180 QPM17180 41,52 QPM11180 48,99 - - - 225 200 QBM17FK200 79,57 QBM11FK200 82,84-2 - 225 225 QPM17225 58,07 QBM11FK225 92,27 - - - 280 250 QPM17250 83,04 QBM11FK250 140,06 - - - 280 280 QBM17FK250 127,56 QBM11FK280 152,98 - - - 315 315 QBM17FK315 171,03 QBM11FK315 180,27 - - - 355 350 QBM17FK355 382,59 QBM11FK355 418,47 - - - 400 400 QBM17FK400 723,45 QBM11FK400 779,22 - - 1 EB.13 QBAM Stub flange short spigot for butt welding, for OAB ANSI B16.5 cl.150 backing rings (for other dimensions, use QBM) d OAB dimension PN6 code SDR 17,6 - S 8,3 PN10 code 25 3/4 - - QBAM11034 3,97 - - - 32 1 - - QBAM11100 4,72 - - - 40 1 1/4 QBAM17114 5,38 QBAM11114 5,61 10 30 04 50 1 1/2 QBAM17112 6,34 QBAM11112 6,90 10 30 04 90 3 QBAM17300 13,35 QBAM11300 14,55 5 10 04 23
FLANGES - ISO-DIN SERIES ODB Backing ring in PP/FRP black with steel core according to EN/ISO/DIN to be used with stub flange QBM. Dirlled: PN 10/16 up to d180, PN10 from d200 to d630 d DN *MPA (bar) Code 20 15 16 ODB020 7,68-60 N01 25 20 16 ODB025 8,45-48 N01 32 25 16 ODB032 10,87-20 N02 40 32 16 ODB040 13,17-16 N02 50 40 16 ODB050 15,39-12 N03 63 50 16 ODB063 19,14-12 N03 75 65 16 ODB075 21,18-10 N03 90 80 16 ODB090 25,22-7 N04 110 100 16 ODB110 30,44-7 N04 125 100 16 ODB125 30,44-7 N04 140 125 16 ODB140 46,87-4 N05 160 150 16 ODB160 53,76-4 N05 180 150 16 ODB180 53,76-4 N05 200 200 16 ODB200 76,63-2 N06 225 200 16 ODB225 76,63-2 N06 250 250 16 ODB250 111,60-2 N07 280 250 16 ODB280 111,60-2 N07 315 300 16 ODB315 153,68-1 N08 355 350 16 ODB355 323,76 - - - 400 400 16 ODB400 366,28-1 - 450 500 10 ODB450 467,78 - - - 500 500 10 ODB500 467,78 - - - 560 600 10 ODB560 634,36 - - - 630 600 10 ODB630 634,36 - - - *MPA: maximum allowable pressure 24
FLANGES - ISO-DIN SERIES ODBC Blind flange EN/ISO/DIN in PP/FRP black with steel core. Drilled: PN 10/16 up to d160/200, PN 10 from d200/225 to d400 d DN *MPA (bar) Code 20 15 16 ODBC020 41,86 - - - 25 20 16 ODBC025 42,52 - - - 32 25 16 ODBC032 43,62 - - - 40 32 16 ODBC040 46,71 - - - 50 40 16 ODBC050 52,91 - - - 63 50 16 ODBC063 57,59 - - - 75 65 16 ODBC075 67,47 - - - 90 80 16 ODBC090 74,25 - - - 110/125 100 16 ODBC110 101,44 - - - 140 125 16 ODBC140 124,56 - - - 160/180 150 16 ODBC160 157,18 - - - 200/225 200 16 ODBC200 174,57 - - - 250/280 250 10 ODBC250 228,13 - - - 315 300 10 ODBC315 333,06 - - - 350 350 10 ODBC355 651,47 - - - 400 400 10 ODBC400 744,20 - - - EB.13 *MPA: maximum allowable pressure 25
FLANGES - ANSI SERIES OAB Backing ring ANSI B16.5 cl.150 in PP/FRP with steel core for QBM and QBAM stub flanges d (inch) DN *MPA (bar) Code 1/2 15 16 OAB012 10,26-60 N01 3/4 20 16 OAB034 12,79-48 N01 1 25 16 OAB100 15,05-20 N02 1 1/4 32 16 OAB114 17,37-16 N02 1 1/2 40 16 OAB112 21,66-12 N03 2 50 16 OAB200 26,91-12 N03 2 1/2 65 16 OAB212 33,24-10 N03 3 80 16 OAB300 38,98-7 N04 4 100 16 OAB400 50,85-7 N04 6 150 16 OAB600 96,02-4 N05 8 200 16 OAB800 138,91-2 N06 10 250 16 OAB810 178,90-1 N09 12 300 16 OAB812 275,95-1 N10 14 350 16 OAB814 520,68 - - - 16 400 16 OAB816 634,88 - - - *MPA: maximum allowable pressure 26
FLANGES - ANSI SERIES OABC Blind flange ANSI B16.5 cl.150 in PP/FRP grey with steel core, to be used with OAB backing ring d (inch) DN *MPA (bar) Code 1/2" 15 16 OABC012 52,35 - - - 3/4" 20 16 OABC034 53,10 - - - 1" 25 16 OABC100 54,39 - - - 1"1/4 32 16 OABC114 58,29 - - - 1"1/2 40 16 OABC112 66,19 - - - 2" 50 16 OABC200 72,02 - - - 2"1/2 65 16 OABC212 82,31 - - - 3" 80 16 OABC300 92,79 - - - 4" 100 16 OABC400 126,80 - - - 6 150 16 OABC600 196,58 - - - 8 200 16 OABC800 218,29 - - - 10 250 16 OABC810 285,03 - - - 12 300 16 OABC812 416,55 - - - EB.13 *MPA: maximum allowable pressure 27
FITTINGS ISO-BSP Series of fittings designed for conveying fluids under pressure with a thread and weld connection system (butt welding). ADAPTORS FOR BUTT WELDING Technical specifications Size range d 20 63 (mm); R 1/2 2 Nominal pressure SDR 17, 6 (PN6) with water at 20 C SDR 11 (PN10) with water at 20 C Temperature range 0 C 100 C Coupling standards Welding: EN ISO 15494 Can be coupled to pipes according to EN ISO 15494 Thread: ISO 228-1, DIN 2999 Reference standards Construction criteria: EN ISO 15494 Test methods and requirements: EN ISO 15494 Installation criteria: DVS 2202-1, DVS 2207-11, DVS 2208-1, UNI 11397 Valve material 28
ISO-BSP FITTINGS ADAPTORS FOT BUTT WELDING KBFM Adaptor with spigot threaded (R) and short spigot end for butt welding (d) d x R Code 20 x 1/2" KBFM11020012 7,12 - - - 25 x 3/4" KBFM11025034 8,53 - - - 32 x 1" KBFM11032100 10,78 - - - 40 x 1"1/4 KBFM11040114 12,96 - - - 50 x 1"1/2 KBFM11050112 21,26 - - - 63 x 2" KBFM11063200 26,86 - - - EB.13 DBMM Adaptor with female threaded (R) and short spigot end for butt welding (d) d x R Code 20 x 1/2 DBMM11020012 8,82-50 K01 25 x 1/2 DBMM11025012 10,79-30 K01 25 x 3/4 DBMM11025034 11,41-30 K01 32 x 1/2 DBMM11032012 11,78-30 K01 32 x 3/4 DBMM11032034 12,24-30 K02 32 x 1 DBMM11032100 13,42-30 K02 40 x 3/4 DBMM11040034 13,71-30 K02 40 x 1 DBMM11040100 14,80-30 K03 40 x 1 1/4 DBMM11040114 15,70-30 K05 50 x 1/2 DBMM11050012 15,61-25 K02 50 x 1 DBMM11050100 17,60-25 K03 50 x 1 1/4 DBMM11050114 18,64-25 K03 50 x 1 1/2 DBMM11050112 19,68-25 K05 63 x 2 DBMM11063200 23,31-15 K04 29
PACKAGING INFORMATION pack Q.ty of products per Pack 1 Q.ty of products per Carton Box 22 Carton Box 03 Please note that pack and n/ quantities could be modified during the validity of the price list H P L Carton dimensions Box Tipe L (mm) P (mm) H (mm) Volume (m 3 ) 00 800 600 400 0,1920 01 590 390 500 0,1151 02 590 390 300 0,0690 03 390 290 300 0,0339 04 390 290 200 0,0226 05 295 195 200 0,0115 08 680 600 280 0,1142 K01 200 200 130 0,0052 K02 200 200 200 0,0080 K03 300 200 200 0,0120 K04 300 260 200 0,0156 K05 400 300 200 0,0240 K06 400 300 250 0,0300 K07 200 150 100 0,0030 K08 300 100 100 0,0030 K09 300 260 300 0,0234 K10 400 200 200 0,0160 K11 400 400 130 0,0208 K12 400 400 250 0,0400 K13 400 260 420 0,0437 K14 400 300 250 0,0300 K15 400 300 300 0,0360 K16 400 400 250 0,0400 K17 400 400 300 0,0480 K18 600 400 300 0,0720 K19 600 400 500 0,1200 K20 800 600 350 0,1680 N01 160 160 350 0,0090 N02 170 170 300 0,0087 N03 190 190 300 0,0108 N04 210 210 300 0,0132 N05 220 220 220 0,0106 N06 240 240 240 0,0138 N07 280 280 170 0,0133 N08 300 300 180 0,0162 N09 350 350 130 0,0159 N10 410 410 150 0,0252 N11 470 470 90 0,0199 30
CONDITIONS OF SUPPLY INTRODUCTORY STATEMENT: our supplies include the products specified in our Sales confirmation and are governed by the following Terms and Conditions which the Customer declares to understand and to accept, except for possible derogations stated in an explicity written agreement. In particular all foreign supplies will be governed by INCOTERMS, as defined by the International Chamber of Commerce. PRODUCTS: to prevent regrettable misunderstandings, it is advisable to refer to the nomenclature and codes of our catalogues and/or price lists for the identification of our products.the items featuring an asterisk (*), though currently on hand, are not included in our wide range of products for which stock rebuild is scheduled. Therefore our order acceptance depends upon the actual availability of the product. PACKAGING: to speed-up delivery and to facilitate warehousing at the Customer s, we reserve the right to convert the ordered quantities into multiples of the standard packages, as shown in our price list next to each item. MINIMUM PURCHASE: for orders involving a net amount of less than 516,46 we will charge 31 as partial recovery of the handling costs. PRICES: prices will be those in force at the time when the order was placed, except in case of forward delivery In the latter case, the prices in force at the time of shipment will be invoiced. Our prices include normal packing; special packing, if required by the customer will be charged at cost price. DELIVERY: delivery is intended ex our Warehouse or Stores and is normally prompt, subject to being unsold The anticipated delivery terms for unavailable items will be indicated, but these wjll be in no way binding or firm. If these delivery schedules cannot be kept for any reason whatsoever, the Purchaser can cancel the order only if the delay exceeds three months from the anticipated delivery date stated in our Order Confirmation. After this time lapse, we too shall be entitled to cancel any orders for items which delayed deliveries due to serious production problems. SHIPMENT: if the mode of shipment is not specifically indicated by the Customer, shipment will be effected as deemed most suitable by us Even if the goods are sold free to destination, their transport will be at the Customer s risk. Insurance coverage will only be effected if specifically requested by the Customer. PAYMENT: the Customer cannot, for any reason whatsoever, defer payments beyond the established dates. Furthermore, we shall be fully entitled to charge interests in arrears on any and all delayed payments. These interests will be based upon the discount rate in force at that time in Italy, plus 3 unit %. - Unless otherwise specified, payments shall be made by opening of an irrevocable credit at call (for Foreign Countries). - Unless otherwise specified, payment shall be telegraphic transfer not!ater than 30 days after the date of invoicing (for Italy) OWNERSHIP CLAUSE: the products supplied by us will remain our property until fully paid for. GUARANTEE CLAUSE: we guarantee the good quality of our products in compliance with the standards publicized in our catalogues. However, our guarantee is limited to the repair and/or replacement of our materials, excluding any other liability, in particular for damages caused in any way whatsoever by utilization of our products. This guarantee terminates and will be no longer valid: - one year after the delivery of the material in question; - if the material is used in other way than the operating conditions specified by us; - if the materials are modified by people not belonging to our Company. On this subject, it is should be noted that the Purchaser will incur all liabilities provided by Law for any modification of our products. We shall be duly informed about any accidents in which our products are involved and such accidents shall be reported to us immediately and within 24 Hours of their occurence. CLAIMS: only complaints/claims reaching us by registered ietter within 30 days after invoicing date will be taken into consideration. In particular, we will not accept any materials returned to us, unless their reshipment - free at our warehouses - has been duly authorized by our appropriate executive. DISPUTES: any disputes which cannot be amicably settled or settled by a court of arbitration, shall be handled by the Court of Genoa which will have jurisdiction. CUSTOMER SERVICE: our Technical and Commercial Services are available to all our Customers to provide any information on the characteristics and application sectors of our products. The above General Terms and Conditions may be changed without previous notice. All information contained in this collection are given in good faith and are correct at date of publication thereof. The drawings and photographs contained in this price list are provided for illustrative purposes. 31
32
FIP Formatura Iniezione Polimeri Loc. Pian di Parata, 16015 Casella Genova Italy Tel. +39 010 9621.1 Fax +39 010 9621.209 info.fip@aliaxis.com www.fipnet.com