July, 0 Lit. No. 0, Rev. 0 V-Maxx G Hopper Spreader VX-00 & VX-00HO Parts List A DIVISION OF DOUGLAS DYNAMICS, LLC
Hopper Assembly 0 Lit. No. 0, Rev. 0 July, 0
Keep arms, hands, and loose clothing away from auger. Shut off control and unplug spreader before servicing. Keep arms, hands, and loose clothing away from auger. Shut off control and unplug spreader before servicing. ROTATING PARTS AND FLYING OBJECTS CAN CAUSE INJURY OR DEATH Keep hands, arms, feet and loose clothing away Shut off power ans stop engine before servicing Read owners manual before operating. Keep bystanders at least 0 ft away. Hopper Assembly Components D00 Hopper D /- x -/ Hex Cap Screw D0 Salt Baffl e D / Flat Washer D / Flat Washer SS 0 Vibrator D / Locknut Inverted V Service Kit D Baffl e Extension (VX-00 only) D0 Inverted V Assembly D / x -/ Self-Tapping Screw 0 Inverted V Mounting Hardware D0 Discharge Baffl e Item Inverted V Service Kit D0 Inverted V Assembly 0 Inverted V Mounting Hardware Item 0 Inverted V Mounting Hardware D Bolt Plate D /- Serrated Flange Nut D0 Inverted V Backing Plate T00 Stud Cover SS = Stainless Steel ROTATING AUGER CAN CAUSE SERIOUS INJURY OR DEATH D ROTATING AUGER CAN CAUSE SERIOUS INJURY OR DEATH D 0 DO NOT EXCEED GVWR OF VEHICLE DO NOT OVERLOAD SPREADER LOAD SPREADER EVENLY D D Read Owner s Manual for Installation Instructions. Secure spreader to truck with ratchet straps. Anchor spreader securely to truck body with bolt kit provided to prevent slipping or sliding. Routinely check straps and handware to make sure they are secure. D Safety Labels D Label Warning, Rotating Auger D Label Warning, Before Operating D Label Warning, Hands and Feet D Label Warning, Rotating Parts 0 D Label Warning, Do Not Overload 00 Label Warning, Rear Camera D Label Warning, Owner's Manual ns Label SnowEx V-Maxx G ns = not shown Lit. No. 0, Rev. 0 July, 0
COVER, TOP SCREENS, RATCHET STRAPS 0 Cover, Top Screens, Ratchet Straps D Tarp Kit D Ratchet Strap (pkg of ) Top Screen Service Kit Item Top Screen Service Kit D Front Top Screen 0 Top Screen Mounting Hardware D Rear Top Screen Item 0 Top Screen Mounting Hardware D / x -/ Self-Tapping Screw 0 D Hairpin Cotter D0 Clamp D / Flat Washer D / x -/ Clevis Pin Lit. No. 0, Rev. 0 July, 0
SPREADER FRAME & MOUNTING HARDWARE 0 Spreader Frame & Mounting Hardware D0- Side Frame D0 Auger Motor Trans Support D /- x -/ Hex Cap Screw D /- x Serrated Hex Cap Screw D / Flat Washer D Right Stop Bracket D0 /- Locknut 0 D Left Stop Bracket D0 Upper/Lower Front Rail D /- x Hex Cap Screw D0- Rear Apron D / Locknut Lit. No. 0, Rev. 0 July, 0
Auger Drive Components 0 0 0 Lit. No. 0, Rev. 0 July, 0
Auger Drive Components D0 Spinner Drive Mount Plate D -/ Flat Washer D /- x Serrated Hex Cap Screw 0 Auger Coupler Kit D Rear Bearing Cover * Transmission Kit, VX-00 D /-0 x / Hex Cap Screw Transmission Kit, VX-00HO D Label Attention, Grease Fitting D / hp Motor, 0 RPM Auger Bearing Kit F0 Auger Motor Cover D x Auger Break-Thru Plug D -/ Shaft Collar w/set Screw D0 /- Serrated Flange Nut Item Auger Bearing Kit D Auger Bearing, -/ Flange D /- Serrated Flange Nut Item 0 Auger Coupler Kit D Jaw-Coupling Hub D / Key Stock 0 D /- x Set Screw D Jaw-Coupling Spider, Urethane Item * Transmission Kit, VX-00 D / Key Stock D /-0 x Serrated Flange Cap 0 Transmission VX-00 Screw SS D /- x Hex Cap Screw T0 /-0 Locknut SS Item Transmission Kit, VX-00HO D / Key Stock D /-0 x Serrated Flange Cap D Transmission VX-00HO Screw SS D /- x Hex Cap Screw T0 /-0 Locknut SS SS = Stainless Steel * If replacing an early style black transmission, also order PN Transmission Adapter Kit. Lit. No. 0, Rev. 0 July, 0
Spinner Drive Assembly For spinner harness, see Electrical Components pages. 0 0 0 Lit. No. 0, Rev. 0 July, 0
Spinner Drive Assembly D Spinner Shroud D /- Locknut D /- x -/ Socket-Head Cap D / Flat Washer Screw D Tubular Spinner Guard D / Flat Washer D Plastic Defl ector D Plastic Handle D Material Chute D Spinner Drive Enclosure D /-0 x / Serrated Flange SS D Left-Hand Latch T0 /-0 Locknut SS D Right-Hand Latch D Spinner Motor Cover T0 Shoulder Bolt 0 D / Long Rivet D 0" Drive Mounting Pin D Direct Drive Spinner Motor 0 D Drive Pin Clip D /- x Serrated Flange Bolt D /- x -/ Hex Cap Screw Spinner Hub Kit Item Spinner Hub Kit T0 /-0 Locknut SS D Urethane Spinner D /-0 x Serrated Hex Washer-Head D Spinner Hub Cap Screw SS T0 /- x / Hex Cap Screw SS = Stainless Steel Lit. No. 0, Rev. 0 July, 0
Electrical Components 0 Not drawn to scale. Lit. No. 0, Rev. 0 0 July, 0
Electrical Components Cables & Harnessing / Electrical Enclosure Assembly 0 Vehicle-Side Harness Kit Cable Assy, Module to Isolated Stud Cable Assembly, Hopper ns Cable Boot -Pin Cable Assy, Module to Auger Motor ns Bracket, Cable Boot Cable Assy, Spinner Motor, Hopper ns D Center High Mount Stop Light (CHMSL) Harness, Spinner Chute ns D* #0- x -/ Machine Screw SS Vibrator Harness Assembly ns D* #0- Locknut SS Item 0 Vehicle-Side Harness Kit 0 Vehicle Control Harness Fuse, 00A 0 Vehicle Harness Assembly** Fuse Holder/Isolated Stud Block 0 Plug Cover ns Cable Tie, HD " Battery Cable Red ns 0 Cable Tie,." Electrical Box Components Fuse Holder/Isolated Stud Block Spreader Module, -Post ns = not shown SS = Stainless Steel * CHMSL Mounting Hardware. ** Plug cover included. Lit. No. 0, Rev. 0 July, 0
Cab Control VIBRATE LIGHT STROBE PREWET Material Width ON/OFF BLAST Material Flow MIN MAX MIN MAX 0 Cab Control 0 Cab Control Kit Item 0 Cab Control Kit Cab Control, -Knob Cab Control Bracket Kit Item Cab Control Bracket Kit Control Bracket, Inner /-0 x / Pan-Head Machine Control Bracket, Outer Screw SS Black #0 x / Pan-Head Tapping / Shoulder Washer SS Black Screw SS 0 / Lock Washer SS # x / Pan-Head Machine Screw /-0 Hex Nut G Black SS = Stainless Steel G = Grade Lit. No. 0, Rev. 0 July, 0
Electrical Box Assembly 0 Electrical Box Assembly Electrical Box D0 Flexible Draw Latch /- x -/ Serrated Flange D #0 x / Washer-Head Slotted Screw G Screw D /- Serrated Flange Nut 0 Bracket Kit Switch, Push Button, MO 0 0 Cover Assembly Break-Thru Plug ns Label Kit Electrical Box /-0 x / Washer-Head Machine Screw SS Item 0 Bracket Kit /- x -/ Serrated Flange Top Support Bracket Screw G /-0 x -/ Hex Cap Screw SS D /- Serrated Flange Nut /-0 Well Nut Bottom Support Bracket Item 0 0 Cover Assembly D #0 x / Washer-Head Slotted D Latch Keeper Screw 00 /-0 Serrated Flange Nut 0 Cover " Lanyard Loop SS = Stainless Steel ns = not shown G = Grade Lit. No. 0, Rev. 0 July, 0
TrynEx International Ajax Drive Madison Heights, MI 0- www.snowexproducts.com A DIVISION OF DOUGLAS DYNAMICS, LLC Copyright 0 Douglas Dynamics, LLC. All rights reserved. This material may not be reproduced or copied, in whole or in part, in any printed, mechanical, electronic, fi lm, or other distribution and storage media, without the written consent of TrynEx International, LLC. Authorization to photocopy items for internal or personal use by TrynEx International outlets or spreader owner is granted. TrynEx International reserves the right under its product improvement policy to change construction or design details and furnish equipment when so altered without reference to illustrations or specifi cations used. TrynEx International or the vehicle manufacturer may require or recommend optional equipment for spreaders. Do not exceed vehicle ratings with a spreader. TrynEx International offers a limited warranty for all spreaders and accessories. See separately printed page for this important information. The following are registered ( ) or unregistered ( ) trademarks of Douglas Dynamics, LLC: SnowEx, V-Maxx. Printed in U.S.A. Lit. No. 0, Rev. 0 July, 0