Performance Plus: Spiral Bevel Series

Performance Plus: Spiral Bevel Series GAM Perfomance Plus Miniature Spiral Bevel Gearboxes The VP Series Performance Plus Miniature Bevel Gearboxes pack high performance in a small package with the highest torque density, range of ratios, and torque capacity on the market. Highest torque density for the size Sizes 27,, and mm More ratios for the size: 1:1 to :1 High Effi ciency 98% Nominal Torque capacity of 1. to 1 Nm Hollow shaft output option ( & mm) High Strength aluminum housing Sealed and lubricated for life with synthetic oil VPC Series with integrated motor mount 1 2 1. Housing Lightweight, high-strength aluminum - all sides can be used for mounting 2. Bearings Deep groove ball bearings handle axial and radial loading. Spiral Bevel Gearing Case-hardened. Input Available with shaft input or integrated motor adapter and coupling to easily mount to any IEC, NEMA, or servo motor. Output Solid shaft with key or hollow shaft with shrink disc. Seals Protected with high quality NBR seals and lubricated for life with synthetic oil 7 For more information, call us toll-free at 888-GAM-7117 Visit www.gamweb.com for 2-D and -D Drawings

VP & VPC-Series VP Series with Shaft Input Available Models V-B0 E0/HSD K0/HSD VP-Series VPC Series with Integrated Motor Mount Input VPC-W Available Models VPC-W VPC-T Single Output Shaft Dual Output Shaft VPC-S Smooth Hollow Output with Shrink Disc VPC-Series For more information, call us toll-free at 888-GAM-7117 Visit www.gamweb.com for 2-D and -D Drawings 7

VP & VPC Series VP & VPC Series 027 0 0 Ratio 1:1 1.:1 2:1 :1 :1 Ratios Available 1, 1., 2,, :1 Input Speed (RPM) Output Torque (Nm) Power (kw) Output Torque (Nm) Power (kw) Output Torque (Nm) Power (kw) 10. 0.00.0 0.00 1.0 0.017 0. 0.019.0 0.027 1.0 0.08 100. 0.07.9 0.02 1.9 0.170 200. 0.071.8 0.10 1.1 0.2 00 0.10. 0.2 1. 0.780 70 0.20.2 0.7 1. 1.09 1000 2.9 0.10.1 0.8 1.2 1.1 100 2.9 0. 0.1 12.8 2.0 2000 2.8 0.98.9 0.8 12. 2. 200 2.7 0.721.8 1.02 12.0.21 000 2. 0.8.7 1.19 11.8.78 000 2. 1.07. 1. 11.2.79 10 2.2 0.002.2 0.002 11.0 0.008 0 2.2 0.008.2 0.011 11.0 0.09 100 2.2 0.01.2 0.02 10.9 0.078 200 2.1 0.00.1 0.0 10.7 0.12 00 2.1 0.07.0 0.107 10. 0.7 70 2 0.107 2.9 0.1 9.9 0.29 1000 1.9 0.1 2.8 0.199 9. 0.8 100 1.9 0.20 2.7 0.288 9. 1.00 2000 1.8 0.2 2. 0.70 8.9 1.27 200 1.7 0.0 2. 0. 8.7 1. 000 1.7 0. 2. 0.1 8. 1.80 000 1. 0. 2. 0. 8.0 2.28 10 - - 2. 0.001 8. 0.00 0 - - 2. 0.00 8. 0.02 100 - - 2. 0.012 8. 0.0 200 - - 2.2 0.02 8. 0.089 00 - - 2.2 0.09 8.0 0.21 70 - - 2.1 0.08 7.7 0.09 1000 - - 2.0 0.107 7. 0.9 100 - - 2.0 0.10 7.2 0.77 2000 - - 1.9 0.20.9 0.77 200 - - 1.8 0.20.7 0.89 000 - - 1.8 0.288. 1.0 000 - - 1.7 0..2 1.2 10 - - 1. 0.001. 0.002 0 - - 1. 0.00. 0.012 100 - - 1. 0.00. 0.02 200 - - 1. 0.011. 0.0 00 - - 1. 0.02.1 0.109 70 - - 1. 0.07.9 0.18 1000 - - 1. 0.0.7 0.20 100 - - 1. 0.09. 0.29 2000 - - 1.2 0.08. 0.78 200 - - 1.2 0.107.1 0. 000 - - 1.1 0.118.0 0. 000 - - 1.1 0.17.7 0.70 10 - - 1. 0.000.0 0.001 0 - - 1. 0.002.0 0.007 100 - - 1. 0.00.9 0.01 200 - - 1. 0.007.9 0.02 00 - - 1.2 0.01.7 0.0 70 - - 1.2 0.02. 0.090 1000 - - 1.1 0.029. 0.118 100 - - 1.1 0.0. 0.172 2000 - - 1.1 0.09.1 0.219 200 - - 1.0 0.07.9 0.20 000 - - 1.0 0.080.8 0.0 000 - - 0.9 0.09. 0.8 7 For more information, call us toll-free at 888-GAM-7117 Visit www.gamweb.com for 2-D and -D Drawings

VP & VPC Series Nominal Output Torque (T 2n ) VP & VPC Series 027 0 0 Stock Ratios 1, 1., 2,, Nm (lb-in) 1:1. (1) () 1 (12) 1.:1 2.2 (19).2 (28) 11 (97) 2:1 - - 2. (20) 8. (7) :1 - - 1. (1). (8) :1 - - 1. (12) () 1:1 () 7. () 2 (221) 1.:1. (29).8 (2) 1. (1) Max Acceleration Output Torque* Nm (lb-in) 2:1 - -. (1) 1 (11) (T 2B ) :1 - - 2 (18) 10 (89) :1 - - 2 (18) 7. () 1:1 7 (2) 10 (89) 2 (28) 1.:1. (9). (7) 22 (19) Emergency Output Torque** Nm 2:1 - -. (1) 17 (10) (T 2not ) (lb-in) :1 - - (27) 1 (11) :1 - - 2. (2) 10 (89) Max Speed (n 1max ) RPM - 700 700 700 Output Backlash (j) arcmin - 1 1 1 Allowable Radial Load (F rad )*** N (lbs) Input 120 (27) 10 () 20 (72) Output 10 () 200 () 00 (90) Allowable Axial Load (F axial )*** N (lbs) Input 0 (1) 80 (18) 10 () Output 7 (17) 100 (22) 200 () Weight (m) kg (lbs) VP 0.1 (0.) 0.22 (0.9) 0. (1.2) VPC 0.1 (0.8) 0.7 (0.82) 0.9 (2.1) Noise Level (L PA ) db(a) - 70 70 70 1:1 Contact GAM Contact GAM Contact GAM 1.:1 Contact GAM Contact GAM Contact GAM Mass Moment of Inertia (J 1 ) kg cm 2 2:1 Contact GAM Contact GAM Contact GAM (lb-in 2 ) :1 Contact GAM Contact GAM Contact GAM :1 Contact GAM Contact GAM Contact GAM Efficiency at Load >98% Service Life > 1,000 hours Lubrication Synthetic Oil, ISO VG 10 Protection Rating IP Operating Temperature Range 80 C * At 1000 rpm maximum ** Permissible 1000 times maximum during service *** Load applied at center of output shaft @00 RPM 77

VP Series Dimension Model VP-Series B0, C0, D0, G0, H0, J0 configurations Description 027 0 0 mm mm mm D1 k Input Shaft Diameter 7 10 D2 k Output Shaft Diameter 7 10 D h7 Pilot Diameter 2 2 D Output Step Diameter 8 10 12 D12 Input Step Diameter 8 10 12 D1 Input Hub Pilot Diameter 2 28 f1 Output Flange Thread 8xM 8xM 8xM f2 Housing Thread 1xM 2xM 2xM f Output Shaft Thread M2 M M f Input Shaft Thread (DIN 2) M2 M M L1 Housing Size 27 L2 Housing Size 7 L Output Shaft to Centerline. 0 0 L Mounting Bolt Location 22 27 7 L Mounting Bolt Location 2 27 7 L Pilot Height 7. 11. L7 Small Pilot Height 1 1 1 L8 Output Shaft Length 1 1 2 L1 Centerline to End of Input Shaft 1 8 78 L19 Centerline to Input Pilot 18 21 1 L20 Input Shaft Length 1 1 2 L21 Centerline to Input Hub 7 2 B0 C0 D0 G0 H0 J0 78 For more information, call us toll-free at 888-GAM-7117 Visit www.gamweb.com for 2-D and -D Drawings

VP Series L Dimension Model VP Series E0 and K0 Configuration* Description 0 0 mm mm D1 k Input Shaft Diameter 7 10 D h7 Pilot Diameter 2 D7 H7** Hollow Shaft Diameter 10 D10 Shrink Disk OD Consult GAM Consult GAM D12 Input Step Diameter 10 12 D1 Input Hub Pilot Diameter 28 D1 j Extended Shaft Diameter 8 12 f1 Output Flange Thread 8xM 8xM f2 Housing Thread 2xM 2xM f Input Shaft Thread (DIN 2) M M L1 Housing Size L2 Housing Size L Mounting Bolt Location 27 7 L Mounting Bolt Location 27 7 L Pilot Height 7. 11. L1 Hollow Shaft to Centerline 2 L1 Shrink Disk End to Centerline 0 L1 Centerline to End of Input Shaft 8 78 L20 Input Shaft Length 1 2 L21 Centerline to Input Hub 2 * Size 027 Not available with hollow output shaft ** Mating shaft should have j tolerance E0/HSD K0/HSD 79

VPC Series VPC-W (Single Shaft) VPC-T (Dual Shaft) VPC-W / VPC-T VPC-S (Size 0 and 0 only) Model VPC-Series: VPC-T, VPC-W, VPC-S Dimension 027 0 0 Description mm mm mm D1 min Motor Shaft Diameter D1 max 1 1 2 D2 k Output Shaft Diameter 7 10 D h7 Pilot Diameter 2 2 D Shoulder Diameter 8 10 12 D7 H7* Smooth Hollow Diameter - 10 D10 Shrink Disc OD - Consult GAM Consult GAM L1 Housing Size 27 L2 Housing Size 7 L Output Shaft To Centerline. 0 0 L Mounting Bolt Location 22 27 7 L Mounting Bolt Location 2 27 7 L Output Pilot Height 7. 11. L7 Small Pilot Height 1 1 1 L8 Output Shaft Length 1 1 2 L9 Key Length 10 12 18 L10 Key Width 2 2 L11 Shaft Height With Key L12 Shaft Length - 10 1 L1 Hollow Shaft To Centerline - 2 L1 Shrink Disc End To Centerline - 0 L1** Overall Length 9 101 1 f1 Output Flange Mounting Holes 8xM 8xM 8xM f2 Housing Mounting Holes 1xM 2xM 2xM f Shaft Thread Din 2 M2 M M * Mating shaft should have j tolerance **Depending on motor, length may change 80 For more information, call us toll-free at 888-GAM-7117 Visit www.gamweb.com for 2-D and -D Drawings

VP & VPC Series E0/HSD K0/HSD TYPE CODES FOR VP SERIES Example: VP - C0-0 - 001-70 - S1 - M0000 - H0000 - C0000 Gearbox Series VP Gearbox Model B0, C0, D0, F0, H0, J0 E0/HD, K0/HSD (E0 and K0 not available on 027) Gearbox Size 027, 0, 0 Ratio 001, 1., 002, 00, 00 Configuration Code Output Code Motor Code Duty Cycle S1 Continuous Speed S Cyclic Input Running Speed VPC-W VPC-T VPC-S Single Output Shaft Dual Output Shaft Smooth Hollow Output with Shrink Disc TYPE CODES FOR VPC SERIES Example: VPC - W - 090-002 G - 70 - S1 - M0000 - H0000 - C0000 Gearbox Series VP Gearbox Style W = Single output shaft T = Dual output shaft S = Smooth hollow output shaft with shrink disc (not available in 027) Gearbox Size 027, 0, 0 Ratio 001, 1., 002, 00, 00 Configuration Code Output Code Motor Code Duty Cycle S1 Continuous Speed S Cyclic Input Running Speed Keyway on Output Shaft G = Keyway on outout (-W & -T) H = No keyway on output (-S) 81