Patented AirShield Technology Sentry Belt-Driven s C017 Cartridge B035, B040, B050, B070 & B090 Block s
Sentry Precision s Value-Priced Sentry Precision Belt-Driven s The Sentry line is our standard building block spindle and is offered as a low-cost solution for many applications that call for a precision, high performance, standard design. Sentry spindles are built tough to deliver years of trouble-free performance. They feature a 100% inch design, permanent grease lubrication, class 7 extra precision steel ball bearings, and can be applied at any attitude: horizontal, vertical, angular, ceiling, and side-mounted attitudes and rotational need. The Sentry line includes 6 models 1 cartridge and 5 block configurations: C017 Cartridge B035 Block B040 Block B050 Block B070 Block B090 Block Sentry C017 Cartridge The C017 and B035 are the smallest Sentry spindles. These spindles are equipped with labyrinth seals. The Sentry C017 is our newest cartridge spindle, a drop-in replacement for the Gilman 1875. The C017 is available in two basic configurations and offered with three spindle nose options and two spindle mounting brackets. Built to stock, these configurations are offered with 1-2 week shipment and a standard one year warranty. The Sentry B035 is our smallest block spindle. Its compact size makes it ideal for small work that may require precision boring, drilling, and milling. The B035 is offered with a variety of motor drive packages up to 3 hp and 9,000 and features 4-6 week shipment. The B035 is a drop-in replacement for the Gilman 2750. Models B040, B050, B070, and B090 represent the high end of the Sentry precision spindle line. These spindles are equipped with the patented SETCO AirShield and feature a standard 3-year warranty and 6-8 week shipment with standard options. All Sentry block-style spindles are equipped with a cross keyway and jackscrew holes, and can be configured with a variety of options such as triplex and quad front bearing arrangements, a wide assortment of motor drive packages, manual drawbar, and arrangement for through-spindle coolant. Like the B035, these spindles can be equipped with a variety of motor drive packages up to 10 hp and 13,500. Sentry B035 Block 2 Note: Due to continual improvements, specifications are subject to change without notice. For current specifications, request a certified print when placing your order. 2004 SETCO Sales Company. SETCO, Sentry TM, and AirShield TM are trademarks of SETCO Sales Company. Sentry B035 with Optional Drive Package in -front Position
How to Order Sentry s The following example identifies the Sentry spindle model code. When ordering a spindle, refer to this chart to specify the desired spindle and option package. The chart below is a matrix of options for the complete Sentry spindle line. B 040 M 2 50 D 18 015 F Housing Type B = Block C = Cartridge Front Bearing Size Nose Type Number of Front Bearings /100 Options /100 = 18 = 36 hp 1.5 hp = 015 10 hp = 100 (Block only) Position (Block only) Sentry Model 017 C 035 B 040 B 050 B 070 B 090 B Features / Options Housing Style/Seal Type Cartridge with Labyrinth Seal Block with Labyrinth Seal Block with AirShield Nose Example: B - 040 - M - 2-50 - D - 18-015 - F Arbor (AR) Collet (CT) Straight Bore (ST) Boring (B) #30 NMTB Milling (M) #40 NMTB Milling (M) #50 NMTB Milling (M) Front Bearing Arrangement Duplex (2) Triplex (3) Quad (4) Brackets, and Drive Options 017 Options Clamp S-Type Cartridge Bracket (P) Positioning Nut Cartridge Bracket (N) 035-090 Options Manual Drawbar for Milling Nose (D) Rotating Coolant Union Arrangement (C) No Option (N) Type A Forward Drive Package (AF) Type B Forward Drive Package (F) Type B Rearward Drive Package (R) For Details, Call Us Fax Us Log On Tel: 1-800-543-0470 Fax: 1-513-941-6913 www.setcousa.com INDE AirShield Design... 4 Sizing Chart... 5 Thrust Loads... 6 Models...7 Accessories...13 3
Patented AirShield TM SETCO s Exclusive Patented TM AirShield Provides the Industry s Best Sealing System! With over 2000 AirShield-equipped spindles in the field, over 4 years of runtime without a failure, the SETCO AirShield sealing system is the most reliable spindle seal in the industry! As standard, an AirShield-equipped SETCO spindle delivers: 3-year limited warranty on standard speed spindles Increased spindle reliability Reduced maintenance Increased runtime Increased production Protection from coolant ingress in dynamic and static modes Corrosion-resistant design Technology U.S. Patent No. 5,727,095, 5,980,115 and 6,217,219 Standard Precision Run-Outs 2.00 TYP..001 B REF. EDGE See Chart.001/8" A.001/8" C.0005 B See Chart C See Chart Size B035 B040 B050 B070 B090 RUNOUT TOLERANCES (INCHES) BORING PILOT MILLING PILOT Pilot Diameter Mounting Face Internal Taper Pilot Diameter 0.0003 Mounting Face 0.0003 See Chart See Chart 4
How to Size Your to the Application Selection Procedure 1. Determine the Power and requirements for the application. Refer to the cutting data found in tool catalogs. For assistance, consult the SETCO Application Group. 2. Locate the () on the chart and follow the line up until it intersects with the required Power (hp). 3. Continue up until it crosses the Size (model) line. This line is the minimum spindle size. 4. Verify that the Tool Overhang, measured from the spindle nose, falls within the maximum for the spindle. 5. For finish bore applications, verify the front spindle bearing is as large as the bore to be machined. TOOL OVERHANG 4" 8" 12" 150 140 130 120 110 100 90 80 70 60 50 40 30 POWER hp B090 10.5" 8.25" Maximum Tool Overhang (in.) 20 B070 10 0 B050 6.0" 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 SPEED ( x 1000) B035 and B040 B040 4.75" B035 3.5" Note: The maximum noted is based upon grease lubrication and light preload bearing. 5
Sentry Thrust Load vs. RPM Thrust Load vs RPM Duplex Bearing 15 Degree Thrust Load vs RPM Duplex Bearing 25 Degree 9000 9000 8000 8000 7000 7000 Thrust Load lbs. 0 5000 B040-030 B035-030 B050-040 B070-060 B090-080 Thrust Load lbs. 0 5000 B040-030 B035-030 B050-040 B070-060 B090-080 2000 2000 1000 1000 0 0 1000 2000 5000 0 7000 8000 9000 1000 0 0 1000 2000 5000 0 7000 8000 9000 1000 Thrust Load vs RPM Triplex Bearing 15 Degree Thrust Load vs RPM Triplex Bearing 25 Degree 9000 9000 8000 8000 7000 7000 Thrust Load lbs. 0 5000 B040-030 B035-030 B050-040 B070-060 B090-080 Thrust Load lbs. 0 5000 B040-030 B035-030 B050-040 B070-060 B090-080 2000 2000 1000 1000 0 0 1000 2000 5000 0 7000 8000 9000 1000 0 0 1000 2000 5000 0 7000 8000 9000 1000 6
C017 Cartridge ø 1.8740 1.8745.75.34 Plain Cartridge Shown with Collet Nose.88 2.62 1.51.81 FLATS 4.88 ø.37 7.88 SET SCREW FLAT ERICKSON COLLET NUT ASSEMBLY 1" HE. FOR 200DA SERIES COLLET COLLET RANGE 1/16 TO 3/8 DIA (COLLET NOT INCLUDED) 2.12 REF. 1.25.12 SQ. KEY.47 Collet Capacity: 1/8 to 3/8" Diameter. Clamp-Style Bracket ø 00.4995 3/32 x 3/64 KEYWAY x 20 RH. FLANGED HE NUT 11/16 HE. ø 1.8745 1.8740 ø1 ø.499 0 Positioning Nut Cartridge Shown with 0" Arbor Nose.82 1/4-20 SOC. SET SCREW ø 1.8745 1.8740 ø ø 05 00 1.10.19 MA.88 FLATS 1.75 8.90 4.88 3.38 MIN 3.88 MA TYP 1.38 ø2.44 TYP Straight Bore Nose 1.12 8.12 4.88 SET SCREW FLAT 1.25 1.25.47.25 WIDE x.06 DP. KEYWAY.12 SQ. KEY.47 Mounting: 0" Diameter. ø.22 ø 00.4995.12 SQ. KEY ø 00.4995 3.250 1.25.75 ø 11/32 ø 1/2 C'BORE.31 DP. 4 HOLES Positioning Nut Bracket.38 3.250 1.75 1/4-20 SOC. SET SCREW (3) 4.75 ø 11/32 ø 1/2 C'BORE.34 DP. 4 HOLES 3.13.69 TYP. ø1.875 20.69.14 TYP. 1.81.375/.376 2.00 4.00 2.19.375/.376 3.13.38.69 TYP. 3.250 1.75.56 ø1.875 3 Sentry 017 Specifications 10.69 Torque Power/Revolution Nose Options Front Bearing Configuration Rear Bearing Configuration Axial Stiffness Radial Stiffness Seal Type Lubrication Drive Package Weight (Approx.) Cartridge Cartridge and Bracket Warranty 34,000 Maximum 35 in-lb 1/ hp/rev Arbor, Straight Bore, and Collet (1/8" to 3/8") Duplex Class 7, "DB" 17 x 35 mm Ball Single Class 7, 17 x 35 mm Ball 140,000 lb/in 40, lb/in Labyrinth Seal System Permanent Grease Pack Not Available 4.0 lb 7.5 lb 1 year.14 TYP. 1.81.375/.376 2.00 4.00 1.375/.376 C017 shown with positioning nut cartridge and positioning nut bracket 7
B035 Block Sentry Belt-Driven B035B 1/4 x 28 THREAD 3 HOLES EQ. SPACED ON A ø2.250 B.C. FOR 5/16 BOLTS 1.250 SQ. KEY.44 2.126 2.124 3 00 02.26 ø.2.75.750.751 ø.53.9370.9365 3.000 3.75 1.875.375 ø PILOT 1.06 1.38 2.75 2.06 1.625 4.000 4.88 7.00 11.13.25 2.25 2.75 ø B035M 3 2.126 2.124 #30 NMTB MILLING TAPER ø2.75 ø1.250 GAGE FOR 5/16 BOLTS.26 ø0.56 A.750.751 1.250 SQ. KEY.44.6250.6255.9370.9365 3.000 1.875 3.75.375 Note: See page 4 for Standard Precision Run-Outs. 1.06 1.38 2.75 2.06 1.625 4.000 4.88 7.00 11.13.25 2.25 2.75 ø ø Note: Erickson 075 collet nose also available. 8 Torque Rating 60 in-lb Power/ Revolution 1/1000 hp/rev Weight 25 lb Seal Type Labyrinth 035 TECHNICAL DATA Warranty 1 year (Grease)* 15,300 Inertia wk 2 12.0 lb-in 2 Radial Stiffness 2.46 x 10 5 lb/in Axial Stiffness** 2.45 x 10 5 lb/in * All data is based upon light preload, duplex bearing setup. stiffness calculated using 100 lb radial load applied at the spindle nose. **
B040 Block Sentry Belt-Driven B040B.375 SQ. DRIVE KEY (2) PLACES 180 APART ON A ø30 B.C. 3/8 x 16 THREAD (4) HOLES EQ. SPACED ON A ø30 B.C. ø 100 102 FOR 5/16 BOLTS ø.56 2.250 SQ. KEY 5.00 21 2.499 ø4.33 4.000 0.19 KEYS 20.79 5.00 PILOT 1.41 2.00 0 30 4.53 20 6.000 7.750 10.00 16.38 0 1 4.38 3.24 (2) HOLES EACH SIDE ADJUSTING BLOCKS ø 1.0620 1.0615 B040M #30 NMTB MILLING TAPER ø 1.250 GAGE FOR 5/16 BOLTS 2.250 SQ. KEY ø.56 5.00 21 2.499 4.000 5.00 20 Note: See page 4 for Standard Precision Run-Outs. 0 ø4.33 1.41 2.00 0 20 30 4.53 7.750 6.000 10.00 16.38 0 1 3.24 ø.6250.6255 4.38 (2) HOLES EACH SIDE ADJUSTING BLOCKS ø 1.0620 1.0615 Torque Rating 66 in-lb Power/ Revolution 1/900 hp/rev Weight 71 lb Seal Type AirShield 040 TECHNICAL DATA Warranty 3 year (Grease)* 13,500 Inertia wk 2 17.0 lb-in 2 Radial Stiffness 2.11 x 10 5 lb/in Axial Stiffness** 2.57 x 10 5 lb/in * All data is based upon light preload, duplex bearing setup. stiffness calculated using 100 lb radial load applied at the spindle nose. ** 9
B050 Block Sentry Belt-Driven B050B.375 SQ. DRIVE KEY (2) PLACES 180 APART ON A ø4.000 B.C. 6.00 3.001 2.999 3/8 x 16 THREAD (4) HOLES EQ. SPACED ON A ø4.000 B.C. ø4.84 ø 2.0000 2.0002 5.000 0.19 KEYS 3.000.79 6.00 PILOT 1.33 2.00 0 4.000 5.00.53 FOR 3/8 BOLTS 2.750 6.750 9.000 ø.56 11.25 17.75 0 1 2 3.20 4.250 SQ. KEY (2) HOLES EACH SIDE ADJUSTING BLOCKS ø 1.1245 1.1240 B050M #40 NMTB MILLING TAPER ø 1.750 GAGE FOR 3/8 BOLTS 2.250 SQ. KEY ø.69 6.00 3.001 2.999 5.000 6.00 3.000 Note: See page 4 for Standard Precision Run-Outs. 0 ø4.84 1.58 2.25 0.53 2.750 4.000 5.00 9.000 6.750 11.25 18.00 0 1 3.20 ø.7500.7505 4 (2) HOLES EACH SIDE ADJUSTING BLOCKS ø 1.1245 1.1240 10 Torque Rating 180 in-lb Power/ Revolution 1/350 hp/rev Weight 113 lb Seal Type AirShield 050 TECHNICAL DATA Warranty 3 year (Grease)* 11,100 Inertia wk 2 30.0 lb-in 2 Radial Stiffness 3.31 x 10 5 lb/in Axial Stiffness** 3.20 x 10 5 lb/in * All data is based upon light preload, duplex bearing setup. stiffness calculated using 100 lb radial load applied at the spindle nose. **
B070 Block Sentry Belt-Driven B070B.375 SQ. DRIVE KEY (2) PLACES 180 APART ON A ø4.750 B.C. 3/8 x 16 THREAD (4) HOLES EQ. SPACED ON A ø4.750 B.C. ø 2.0000 2.0002 FOR 3/8 BOLTS ø.56 3.25 0 SQ. KEY 7.00 31 3.499 6.000 7.00 30 0 ø5.83.19 KEYS.79 PILOT 1.41 2.12 0 5.000 6.00.53 30 10 13.38 8.000 0 1 5.62 4.21 (2) HOLES EACH SIDE ADJUSTING BLOCKS ø 1.9995 1.9990 21.12 B070M #40 NMTB MILLING TAPER ø 1.750 GAGE FOR 3/8 BOLTS 3.25 0 SQ. KEY ø.69 7.00 31 3.499 6.000 7.00 30 Note: See page 4 for Standard Precision Run-Outs. 0 ø5.83 1.73 2.44 0 5.000 6.00.53 30 10 8.000 13.38 21.44 0 1 5.62 4.21 ø.7500.7505 (2) HOLES EACH SIDE ADJUSTING BLOCKS ø 1.9995 1.9990 Torque Rating 974 in-lb Power/ Revolution 1/60 hp/rev Weight 187 lb Seal Type AirShield 070 TECHNICAL DATA Warranty 3 year (Grease)* 8,000 Inertia wk 2 87.0 lb-in 2 Radial Stiffness 7.08 x 10 5 lb/in Axial Stiffness** 4.80 x 10 5 lb/in * All data is based upon light preload, duplex bearing setup. stiffness calculated using 200 lb radial load applied at the spindle nose. ** 11
B090 Block Sentry Belt-Driven B090B 0 SQ. DRIVE KEY (2) PLACES 180 APART ON A ø6.250 B.C. (6) HOLES EQ. SPACED ON A ø6.250 B.C. ø 3.0000 3.0002 FOR 5/8 BOLTS ø.56 3.25.625 SQ. KEY 8 4.251 4.249 7.000 8 4.250.750 ø7.56.25 KEYS.79 PILOT 1.55 2.38 0 5.750 7.53 4.250 120 16.00 90 0 1 5.62 4.13 (2) HOLES EACH SIDE ADJUSTING BLOCKS ø 2.7495 2.7490 24.00 B090M #50 NMTB MILLING TAPER ø 2.750 GAGE FOR 5/8 BOLTS 3.25.625 SQ. KEY ø 1.06 8 4.251 4.249 7.000 8 4.250.750 ø7.56.75 2.05 2.88 0.53 4.250 5.750 7 90 120 16.00 0 1 4.13 ø 1.2500 1.2505 5.62 (2) HOLES EACH SIDE ADJUSTING BLOCKS ø 2.7495 2.7490 Note: See page 4 for Standard Precision Run-Outs. 24 12 Torque Rating 2 in-lb Power/ Revolution 1/25 hp/rev Weight 330 lb Seal Type AirShield 090 TECHNICAL DATA Warranty 3 year (Grease)* 6,200 Inertia wk 2 273.0 lb-in 2 Radial Stiffness 9.65 x 10 5 lb/in Axial Stiffness** 6.05 x 10 5 lb/in * All data is based upon light preload, duplex bearing setup. stiffness calculated using 200 lb radial load applied at the spindle nose. **
Accessories: Drive Type B Belt Drive Package The Type B Belt Drive Packages provide a complete drive system for the Sentry series precision spindles. Mounted on the rear of the spindle housing is an integral belt guard/mounting bracket with motor mounting plate having screw type belt adjustment. Belt guard/mounting bracket allows for mounting of the motor toward or away from the spindle nose. Belt and pulleys are included to provide a wide range of incremental operating speeds for the application. The motor plate accommodates C - face mounted motors. Adjusting Screw Drive Package A Forward B 2 B M Note: Specify motor mounting position when ordering. Rearward Size hp 1 1.5 2 3 5 7.5 10 Frame Size (max.) Base Size Frame Size 56C 143TC 145TC 143TC 145TC 182TC 145TC 145TC 184TC 145TC 182TC 213TC 184TC 184TC 215TC 213TC 213TC 215TC 215TC C-1 9.69 10.31 11.62 10.31 10 13.44 11.62 11.62 14.44 12.00 13.31 16.31 14.44 14.44 17.44 16.31 16.31 16.31 17.44 A B B-2 M N 675 145TC B035 17.38 6.75 3.38 2.12 N C C 1* * Non-NEMA Standard Vendor Dependent C = Arbor Length 850 1025 1075 145TC 215TC 215TC B040 B050 B070 B090 B070 B090 20.65 22.65 24.91 8 10.25 10.75 4.25 5.12 5.38 2.88 3.88 3.88 0.12 Type A Belt Drive Package Drive Package The Type A Belt Drive Packages are offered on models B070 and B090 for motors of 15, 20, and 25 hp. Mounted on the top of the spindle housing is an adjustable motor mounting plate that controls belt tensioning. Belt and pulleys are included to provide a wide range of incremental operating speeds for the application. plate accommodates foot-mounted motors. Note: This is a Custom Option and may extend lead time. Adjusting Screw Mounting Plate Size B070 B090 hp 15 15 15 15 20 20 25 25 Base Frame Size 254T 256T 284T 284TS Belt Drive Ratio () Type A Typical Mounting with HS Series Hardened Way Slide 13
Accessories: Standard Sentry Drive Packages Model 035 Model 070 hp 1.5 2 3 hp 1.5 2 3 5 10 (Nominal) (Nominal) () 800 960 1500 2250 2700 3168 4032 4500 4986 5400 5890 6336 6750 7200 7499 8100 8510 9000 () 900 900 1500 2100 2400 2701 3374 4500 5040 5400 1 6750 900 1500 2100 2400 2701 3374 4500 5040 5400 1 6750 1500 2100 2400 2701 3374 4500 5040 5400 1 6750 Ratio 1.25 to 1.25 1 to1.25.5.76.12.25.385.5 6.76.875 1 to 2 1 to 2.083 1 to 2.25 1 to 2.364 1 to 2.5 Ratio 1. 1.714 to 1 1. 1.067 to 1.111.25.4.5.667.875 1. 1.714 to 1 1. 1.067 to 1.111.25.4.5.667.875 1. 1.714 to 1 1. 1.067 to 1.111.25.4.5.667.875 Model 040 Model 090 hp 1.5 2 3 hp 1.5 2 3 5 10 (Nominal) (Nominal) () 902 1500 2138 2400 2707 3374 4320 4561 4799 5263 5760 6232 6646 6923 7200 () 923 923 1177 1523 2077 2493 2769 3046 3324 3877 4500 4820 5191 5400 923 1177 1523 2077 2493 2769 3046 3324 3877 4500 4820 5191 5400 1177 1523 2077 2493 2769 3046 3324 3877 4500 4820 5191 5400 Ratio 1. 1 to1.188 1. 1.067 to 1.111.2.267.333.462.6.731.846.923 1 to 2 Ratio 1.3 to 1 1.3 to 1 1.529 to 1 1.18.154 1.444 to 1 1.3 to 1 1.18 1.083 to 1.077.25.339.442.5 1.3 to 1 1.529 to 1 1.18.154 1.444 to 1 1.3 to 1 1.18 1.083 to 1.077.25.339.442.5 1.529 to 1 1.18.154 1.444 to 1 1.3 to 1 1.18 1.083 to 1.077.25.339.442.5 Model 050 hp 1.5 2 3 5 (Nominal) () 902 900 1500 2138 2400 2707 3374 4320 4561 4799 5263 5760 6232 6646 6923 7200 1500 2138 2400 2701 3374 4320 4561 4799 5263 5760 6232 6646 6923 7200 Ratio 1. 1 to1 1 to1.188 1. 1.067 to 1.111.2.267.333.462.6.731.846.923 1 to 2 1. 1 to1.188 1. 1.067 to 1.111.2.267.333.462.6.731.846.923 1 to 2 Note: Standard Type B drive packages. For Type A packages consult factory. based on no-load motor. Specifications subject to change without notice. Custom drive packages are available as a Custom Option. Consult factory. 14
Accessories: Coolant Union & Drawbar Accessories Rotating Coolant Union Arrangement Available on all Sentry series super precision spindles. Rotating coolant unions allow the coolant to enter by way of the rear of the spindle shaft and flow through the spindle to the tooling. Requires hole through and machining of spindle shaft to accommodate mounting of union (standard is customer-supplied, or SETCO can provide). Available as straight through or 90 union. Specify left-hand or right-hand thread. THREAD ø S THREAD S 5/8 18.6556.6560.28 Note: Specify direction of spindle rotation viewing rear of spindle. Other makes and styles of unions are available upon request. Manual Drawbar Commonly used for manual retention of milling taper adapters per ANSI B5.18. 1 M HE THREAD M 1 S SIZE THREAD M -1 S M-1 HE 30 40 50-13.62-11 -8 1.25 1 2.00.62.625.750 1.250.38.38 1.56 1.81 2.88 1.06 1.62 Call Us Fax Us Log On Tel: 1-800-543-0470 Fax: 1-513-941-6913 www.setcousa.com 15
YOUR SINGLE SOURCE For Repair, Rebuild, Exchange, New Plus a Total Range of Related Services to Enhance Your Just-In-Time Manufacturing PRODUCTS Dovetail Slides Linear Recirculating Bearing Slides Hardened Steel Way Slides Grinding s and Accessories Boring and Milling s Sentry Belt-Driven s /Slide Combinations 3-Axis Machining Modules ProMetrix Belt- Driven s Smart Closed-Loop ized s SERVICES Total Solution Team Engineering Field Service and Vibration Analysis State-of-the-Art Slide Repair Leading Edge Repair Complete In-House Manufacturing, Assembly Hands-On and Slide Repair Training Tel: 800/543-0470 Fax: 513/941-6913 www.setcousa.com Publication S-0005-1A Printed in U.S.A. 5M 1201 RPI