BACKHOE LOADERS CONTENTS Features...............................-1 Specifications...........................-3 416E:......................-6 Lift Capacities.........................-8 420E/420E IT:......................-9 Lift Capacities........................-1 422E:.....................-16 428E:.....................-18 430E/430E IT:.....................-21 Lift Capacities........................-27 432E:.....................-28 434E:.....................-30 442E:.....................-32 444E:.....................-34 40E:.....................-36 Lift Capacities........................-38 Backhoe Bucket Capacities...............-39 Work Tools.............................-41 Features: Center pivot backhoe 416E, 420E, 430E, 40E. Side shift backhoe 422E, 428E, 432E, 442E, 444E. Single-tilt loader features divergent loader arms, a narrow loader tower and single bucket tilt cylinder for improved visibility. Integrated toolcarrier (parallel lift) loader offers maximum lift and breakout forces, divergent loader arms, and parallel lift for efficient loading and material handling. Hydraulic Quick Coupler provides versatility and allows quick connection to selected work tools for the Cat family of integrated toolcarriers. Excavator-style backhoe provides enhanced visibility even with narrow buckets, ability to reach over obstacles, and faster, easier truck loading. Backhoe Quick Coupler offerings include a convenient pin grabber and versatile pin puller for use with D/E-Series and competitive work tools. Load-sensing hydraulic system provides full hydraulic power to implements at all engine speeds, low fuel consumption, smooth control and low lever efforts. A dual-setting torque limiter automatically optimizes hydraulics. Backhoe Loader Website for Dealers on Infocast offers latest, updated information. This comprehensive site contains all published and unpublished supporting materials for backhoe loaders in the North American Commercial Division. https://nacd.cat.com/infocast/frames/products/bcp/bhlit/ Edition 40-1
Features Pilot operated backhoe controls provide smooth, efficient operation and operator comfort. Not available on 416E, 422E, 428E. New thumb roller controllers provide ergonomic function of the extendible stick and/or auxiliary hydraulic circuits. Convenient pattern changer switch is within the cab. Pilot operated stabilizer controls are standard on 420E, 430E, 432E, 442E, 444E, and 40E. Autoup stabilizers are standard with the deluxe cab. The Cat 304C DIT engine meets all U.S. EPA Tier 2/EU Stage II emissions requirements. The efficient fuel system delivers reliable engine lug performance. The transmission and new Cat axles provide increased roading speed. The 40E is powered with the Cat C4.4 engine with ACERT technology. XT-3 ES hoses combined with Cat couplings and O-ring face seal fittings provide a dry, reliable machine. The E Series backhoe circuits incorporate the XT-3 ES ToughGuard hoses. Operator station features: Air-suspension seat is standard on all models. Adjustable tilt steering is standard except on 416E and 422E. Rear, door and side windows can be fully opened for enhanced ventilation and cab roof is extended to help keep operator dry. Four-post Rollover Protective Structure (ROPS) for increased protection. Fully featured, a Deluxe Cab option will feature pilot operated joystick controls, state-of-the-art control panels with white-faced gauges mounted in a rotating vandal cover, pilot operated stabilizer controls with automatic hold upon lifting, and additional system monitoring including service indicators for engine air cleaner, water-in-fuel, and hydraulic filter. High performance backhoe linkage offers 20 of bucket rotation with one pin position. New backhoe geometry creates more stick force, brought closer to the operator to pull spoil through trench. The 40E has a backhoe bucket rotation of 198. Diagonal Retention System (DRS) standard on all factory installed buckets with weld-on tooth adapters, excluding the 40E. Bucket teeth are attached with diagonal pins rather than horizontal pins for easy exchange of bucket teeth. 40E buckets remain fitted with J22 size, horizontal fastener pins. All other buckets have bolt-on Uni-teeth. Integrated lift eye on backhoe linkage. Cat Cushion Swing system smooths the swing function, improving the return-to-trench controllability. The extendible stick is redesigned to offer object clamping while extending. Serrated edges secure clamped objects. New wear pad configuration eases adjustment on all four sliding surfaces. All sticks have thumb mounts. The hydraulic system uses load sensing, flow sharing valves with anti-drift characteristics. Smooth, multi-function operation with the ability to have maximum lifting and digging forces at any RPM. Ride Control available as an option on all E-Series machines. The Ride-Control system smooths the ride under all job-site conditions. 4F/4R fully synchronized gear box provides on-the-go shifting in all gears and on-the-go engagement of optional all wheel drive. Maximum, level travel speed increased to 40 km/h (2 mph). Auto-Shift transmission is available as an option on E-Series and is standard on 40E for operator comfort and efficiency. Brakes are oil immersed, multi-disc, self adjusting, and wear surface is made of Kevlar for long service life. Brakes are boosted on 420E, 430E and 40E models. All Wheel Drive is available as an option on all E-series machines, standard on the 430E and 40E. It improves mobility and loader performance in poor traction conditions and can be engaged at any time in any operating condition. Includes 4-wheel braking effect feature. Sloping, flip-open hood allows excellent visibility to the loader working area and tilts forward for single location access to all daily service points. AccuGrade Grade Control Systems for Backhoe Loaders are entry level grade and depth check systems that provide accuracy, productivity, lower operating costs and enhanced profitability. Dry-type, radial seal air cleaner with automatic, integrated dust ejector system provides efficient pre-separation. The two-stage air filter incorporates both air cleaner and pre-cleaner functions into a single unit mounted under the hood. -2 Edition 40
Specifications MODEL 416E 420E/420E IT 422E Gross Flywheel Power SAE J199 8 kw 78 hp 69 kw 93 hp 7 kw 76 hp ISO 14396 6 kw 76 hp 68 kw 92 hp 7 kw 76 hp Net Flywheel Power SAE J1349 * kw* *74 hp* 66 kw 89 hp kw 74 hp ISO 9249 6 kw 7 hp 67 kw 90 hp *6 kw* *7 hp* EEC 80/1269 6 kw 7 hp 67 kw 90 hp *6 kw* *7 hp* Operating Weight 6792 kg 14,960 lb 702 kg 1,474 lb 7210 kg 1,89 lb Engine Model 304C DINA 304C DIT 304C DINA Rated Engine RPM 2200 2200 2200 No. of Cylinders 4 4 4 Bore 10 mm 4.13 in 10 mm 4.13 in 10 mm 4.13 in Stroke 127 mm in 127 mm in 127 mm in Displacement 4.4 L 268 in 3 4.4 L 268 in 3 4.4 L 268 in 3 Speeds Forward (Power Shuttle) km/h mph km/h mph km/h mph 1st 6.0 3.7 6.0 3.7 6.0 3.7 2nd 9..9 9..9 10.0 6.2 3rd 19.8 12.3 19.9 12.4 20.0 12.4 4th 39.9 24.8 40.1 24.9 40.0 24.8 Speeds Reverse (Power Shuttle) 1st 6.0 3.7 6.0 3.7 6.0 3.7 2nd 9..9 9..9 10.0 6.2 3rd 19.8 12.3 19.9 12.4 20.0 12.4 4th 39.9 24.8 40.1 24.9 40.0 24.8 Speeds Forward (Auto-Shift) 1st.8 3.6 2nd 9.3.8 3rd 19.4 12.0 4th 26.6 16. th 40.1 24.9 Speeds Reverse (Auto-Shift) 1st.8 3.6 2nd 12.3 7.6 3rd 26.7 16.6 Turning Circle, Wall to Wall 10.74 m 3'3" 10.84 m 3'7" 10.83 m 3'" Turning Circle, Curb to Curb 8.16 m 26'9" 8.16 m 26'9" Minimum Turning Circle, Curb to Curb 6.44 m 21'1" 6.44 m 21'1" Tires 2WD Bias Front 11L-16 12 PR F-3 11L-16 12 PR F-3 12./80 x 18, 10 PR 2WD Bias Rear 19.L-24 12 PR R4 19.L-24 12 PR R4 16.9 x 28, 10 PR Tires AWD Bias Front 12./80-18 NHS 10 PR 12./80-18 NHS 10 PR 12./80 x 18, 10 PR AWD Bias Rear 19.L-24 12 PR R4 19.L-24 12 PR R4 16.9 x 28, 10 PR Tires AWD Bias Front 12./80-18 NHS 10 PR 12./80-18 NHS 10 PR AWD Bias Rear, Flotation 21L-24 16 PR 21L-24 16 PR Tires AWD Radial Front 33/80R18 XM37 33/80R18 XM37 340/80 x R18 AWD Radial Rear 19.L-R24 XM37 19.L-R24 XM37 16.9 x R28 Tires AWD Combination Front 33/80R18 XM37 33/80R18 XM37 AWD Combination Rear 19.L-24 12 PR R4 19.L-24 12 PR R4 Hydraulic System, Closed Center Load Sensing, Flow Sharing Load Sensing, Flow Sharing LSPC Pump Capacity 132 L/min @ 163 L/min @ 12 L/min @ 2200 rpm @ 22 700 kpa 2200 rpm @ 24 898 kpa 2200 rpm @ 22 700 kpa 34.8 gpm @ 43 gpm @ 33 gpm @ 2200 rpm @ 3292 psi 2200 rpm @ 3611 psi 2200 rpm @ 3292 psi Fuel Tank Capacity 144 L 38 U.S. gal 144 L 38 U.S. gal 144 L 38 U.S. gal *With optional turbocharger: 416E SAE J199 69 kw (93 hp). 422E SAE J199 69 kw (94 hp). Edition 40-3
Specifications MODEL 428E 430E/430E IT 432E Gross Flywheel Power SAE J199 *69 kw* 92 hp 7 kw 101 hp *69 kw* 92 hp ISO 14396 62 kw 83 hp 7 kw 100 hp 69 kw 92 hp Net Flywheel Power SAE J1349 *60 kw 80 hp 72 kw 97 hp 66 kw 89 hp ISO 9249 *67 kw 89 hp 73 kw 98 hp 67 kw 89 hp EEC 80/1269 *67 kw 89 hp 73 kw 98 hp 67 kw 89 hp Operating Weight 770 kg 16,689 lb 7294 kg 16,066 lb 7780 kg 17,12 lb Engine Model 304C DIT 304C DIT 304C DIT Rated Engine RPM 2200 2200 2200 No. of Cylinders 4 4 4 Bore 10 mm 4.13 in 10 mm 4.13 in 10 mm 4.13 in Stroke 127 mm in 127 mm in 127 mm in Displacement 4.4 L 268 in 3 4.4 L 268 in 3 4.4 L 268 in 3 Speeds Forward (Power Shuttle) km/h mph km/h mph km/h mph 1st 6.0 3.7.9 3.7 6.0 3.7 2nd 10.0 6.2 9.7 6.0 10.0 6.2 3rd 20.0 12.4 20.0 12.3 20.0 12.4 4th 40.0 24.8 43.2 26.8 40.0 24.8 Speeds Reverse (Power Shuttle) 1st 6.0 3.7.9 3.7 6.0 3.7 2nd 10.0 6.2 9.7 6.0 10.0 6.2 3rd 20.0 12.4 20.0 12.3 20.0 12.4 4th 40.0 24.8 43.2 26.8 40.0 24.8 Speeds Forward (Auto-Shift) 1st.8 3.6 6.0 3.7 2nd 9.4.8 9.0.6 3rd 19.6 12.2 20.0 12.4 4th 27.1 16.8 27.0 16.7 th 41.3 2.8 41.0 2.4 Speeds Reverse (Auto-Shift) 1st.8 3.6 6.0 3.7 2nd 12.3 7.6 9.0.6 3rd 27.1 16.8 20.0 12.4 Turning Circle, Wall to Wall 10.80 m 3'4" 10.8 m 3'7" 10.80 m 3'" Tires 2WD Bias Front 11L-16 12 PR F-3 2WD Bias Rear 19.L-24 12 PR R4 Tires AWD Bias Front 12./80 x 18, 10 PR 12./80-18 NHS 10 PR 12./80 x 18, 10 PR AWD Bias Rear 16.9 x 28, 10 PR 19.L-24 12 PR R4 16.9 x 28, 10 PR Tires AWD Bias Front 12./80-18 NHS 10 PR AWD Bias Rear, Flotation 21L-24 16 PR Tires AWD Radial Front 340/80 x R18 33/80R18 XM37 340/80 x R18 AWD Radial Rear 16.9 x R28 19.L-R24 XM37 16.9 x R28 Tires AWD Combination Front 33/80R18 XM37 AWD Combination Rear 19.L-24 12 PR R4 Hydraulic System, Closed Center LSPC Load Sensing, Flow Sharing LSPC Pump Capacity 12 L/min @ 163 L/min @ 16 L/min @ 2200 rpm @ 22 700 kpa 2200 rpm @ 24 898 kpa 2200 rpm @ 24 900 kpa 33 gpm @ 43 gpm @ 41 gpm @ 2200 rpm @ 3292 psi 2200 rpm @ 3611 psi 2200 rpm @ 3611 psi Fuel Tank Capacity 144 L 38 U.S. gal 144 L 38 U.S. gal 144 L 38 U.S. gal *With optional turbocharger: 428E SAE J199 7 kw (102 hp). 432E SAE J199 7 kw (102 hp). -4 Edition 40
Specifications All Wheel Steer MODEL 434E 442E 444E 40E Gross Flywheel Power SAE J1349 7 kw 100 hp 7 kw 100 hp 7 kw 100 hp 102 kw 137 hp ISO 14396 7 kw 100 hp 102 kw 137 hp Net Flywheel Power SAE J1349 72 kw 97 hp 92 kw 124 hp ISO 9249 73 kw 97 hp 73 kw 97 hp 73 kw 97 hp 93 kw 12 hp EEC 80/1269 73 kw 97 hp 73 kw 97 hp 73 kw 97 hp 93 kw 12 hp Operating Weight 8370 kg 18,42 lb 7940 kg 17,04 lb 8810 kg 19,422 lb 10 90 kg 24,141 lb Engine Model 304C DIT 304C DIT 304C DIT C4.4 Rated Engine RPM 2200 2200 2200 2200 No. of Cylinders 4 4 4 4 Bore 10 mm 4.13 in 10 mm 4.13 in 10 mm 4.13 in 10 mm 4.13 in Stroke 127 mm in 127 mm in 127 mm in 127 mm in Displacement 4.4 L 268 in 3 4.4 L 268 in 3 4.4 L 268 in 3 4.4 L 268 in 3 Speeds Forward (Power Shuttle) km/h mph km/h mph km/h mph km/h mph 1st 6.0 3.7 6.0 3.7 6.0 3.7 2nd 9.0. 10.0 6.2 10.0 6.2 3rd 18.0 11.1 20.0 12.4 20.0 12.4 4th 37.0 22.9 41.0 2.4 40.0 24.8 Speeds Reverse (Power Shuttle) 1st 6.0 3.7 6.0 3.7 6.0 3.7 2nd 9.0. 10.0 6.2 10.0 6.2 3rd 18.0 11.1 20.0 12.4 20.0 12.4 4th 37.0 22.9 41.0 2.4 40.0 24.8 Speeds Forward (Auto-Shift) 1st.0 3.1 6.0 3.7 6.0 3.7 6.0 3.7 2nd 9.0. 10.0 6.2 9.0. 9..9 3rd 18.0 11.1 20.0 12.4 20.0 12.4 19.8 12.3 4th 2.0 1. 27.0 16.7 27.0 16.7 27.2 16.9 th 38.0 23.6 42.0 26.0 41.0 2.4 40.1 24.9 Speeds Reverse (Auto-Shift) 1st.0 3.1 6.0 3.7 6.0 3.7 6.0 3.7 2nd 9.0. 10.0 6.2 9.0. 12. 7.8 3rd 18.0 11.1 20.0 12.4 20.0 12.4 27.3 17.0 Turning Circle, Wall to Wall 16. m 4'1" 10.8 m 3'4" 19.4 m 63'6" 11.18 m 36'8" All Wheel Steer, Wall to Wall Two Wheel Steer 16. m 4'1" 10.8 m 3'4" 19.4 m 63'6" Circle Steer 11.8 m 38'7" 9.3 m 30'" 12.9 m 42'3" Independent Rear 11.1 m 36'4" 9.2 m 30'1" 11.9 m 39'0" Tires, Single-Tilt, Front Standard, AWD 1 x 19., 12 PR, R4 Tires, Single-Tilt, Rear Standard, 2WD/AWD 21L-24 R4 18 PR Tire, Parallel Lift, Front Standard, AWD 12./80 x 18, 10 PR Standard, AWD 12./80 x 18, 10 PR Tires, Parallel Lift, Rear Standard, AWD/AWS 16.9 x 28, 12 PR Hydraulic System, Closed Center LSPC Load Sensing Pump Capacity 16 L/min @ 16 L/min @ 16 L/min @ 194 L/min @ 2200 rpm @ 24 900 kpa 2200 rpm @ 24 900 kpa 2200 rpm @ 24 900 kpa 2200 rpm @ 26 200 kpa 41 gpm @ 41 gpm @ 41 gpm @ 1.3 gpm @ 2200 rpm @ 3611 psi 2200 rpm @ 3611 psi 2200 rpm @ 3611 psi 2200 rpm @ 3800 psi Fuel Tank Capacity 187 L 49 U.S. gal 144 L 38 U.S. gal 187 L 49 U.S. gal 144 L 38 U.S. gal Edition 40 -
416E Dimensions and performance specifications shown are for machines equipped with 11L x 16 (10 PR) front tires, 19. x 24 (10 PR) rear tires, ROPS canopy, standard stick with 610 mm (24 in) standard duty bucket, and 0.76 m 3 (1 yd 3 ) loader bucket and standard equipment unless otherwise specified. General Purpose General Purpose Multi Purpose MACHINE DIMENSIONS 0.76 m 3 (1 yd 3 ) 0.96 m 3 (1.2 yd 3 ) 1.0 m 3 (1.3 yd 3 ) 1) Overall transport length 7233 mm 23'9" 7321 mm 24'0" 728 mm 23'11" Overall length 7180 mm 23'7" 7293 mm 23'11" 7209 mm 23'8" 2) Overall transport height 377 mm 11'9" 377 mm 11'9" 377 mm 11'9" Overall width 2438 mm 8'0" 2438 mm 8'0" 2438 mm 8'0" 3) Height to top of cab/canopy 2819 mm 9'3" 2819 mm 9'3" 2819 mm 9'3" 4) Height to top of exhaust stack 274 mm 9'0" 274 mm 9'0" 274 mm 9'0" Ground clearance (minimum) 320 mm 1'1" 320 mm 1'1" 320 mm 1'1" ) Rear axle centerline to front grill 2704 mm 8'10" 2704 mm 8'10" 2704 mm 8'10" Front wheel tread gauge 1880 mm 6'2" 1880 mm 6'2" 1880 mm 6'2" Rear wheel tread gauge 1727 mm '8" 1727 mm '8" 1727 mm '8" 6) Wheelbase (2WD/AWD) 2200 mm 7'3" 2200 mm 7'3" 2200 mm 7'3" -6 Edition 40
416E LOADER BUCKET DIMENSIONS General Purpose General Purpose Multi Purpose AND PERFORMANCE 0.76 m 3 (1 yd 3 ) 0.96 m 3 (1.2 yd 3 ) 1.0 m 3 (1.3 yd 3 ) Capacity (SAE) rated 0.76 m 3 1 yd 3 0.96 m 3 1.2 yd 3 1.0 m 3 1.3 yd 3 Width 2262 mm 7'" 2262 mm 7'" 2262 mm 7'" Lift capacity at maximum height 247 kg 61 lb 2427 kg 31 lb 222 kg 490 lb Breakout force 40.9 kn 918 lb 38.1 kn 86 lb 37.2 kn 8363 lb 7) Maximum hinge pin height (2WD) 3296 mm 10'10" 3296 mm 10'10" 3296 mm 10'10" Maximum hinge pin height (4WD) 3368 mm 11'1" 3368 mm 11'1" 3368 mm 11'1" 8) Dump angle at full height 44 44 44 Dump height at maximum angle 261 mm 8'8" 273 mm 8'" 2624 mm 8'7" 9) Dump reach at maximum angle 772 mm 2'6" 83 mm 2'6" 761 mm 2'6" 10) Maximum bucket rollback at ground level 39 39 39 11) Digging depth 106 mm 4" 106 mm 4" 106 mm 4" Maximum grading angle 110 107 110 Width of dozer cutting edge N/A N/A 2262 mm 7'" 12) Grill to bucket cutting edge, carry position 1428 mm 4'8" 116 mm '0" 1480 mm 4'10" 13) Maximum operating height 4063 mm 13'4" 4063 mm 13'4" 4063 mm 13'4" Jaw opening maximum N/A N/A 790 mm 2'7" Weight (does not include teeth or forks) 340 kg 70 lb 438 kg 967 lb 723 kg 194 lb BACKHOE DIMENSIONS Extendible Stick Extendible Stick AND PERFORMANCE Standard Stick Retracted Extended 14) Digging depth, SAE (maximum) 4360 mm 14'4" 4402 mm 14'" 46 mm 17'11" 1) Digging depth, 610 mm (2'0") flat bottom 4321 mm 14'2" 4363 mm 14'4" 420 mm 17'10" Reach from rear axle centerline at ground line 6721 mm 22'1" 6760 mm 22'2" 7769 mm 2'6" 16) Reach from swing pivot at ground line 618 mm 18'" 67 mm 18'7" 6666 mm 21'10" Maximum operating height 23 mm 18'1" mm 18'3" 6302 mm 20'8" Loading height 3636 mm 11'11" 377 mm 11'9" 414 mm 13'7" 17) Loading reach 1768 mm '10" 1868 mm 6'2" 2771 mm 9'1" Swing arc 180 180 180 Bucket rotation 20 20 20 18) Stabilizer spread, operating position (center of pad) 3310 mm 10'10" 3310 mm 10'10" 3310 mm 10'10" 19) Stabilizer spread, operating position (outside edge of pad) 3770 mm 12'4" 3770 mm 12'4" 3770 mm 12'4" Stabilizer spread, transport position 2322 mm 7'7" 2322 mm 7'7" 2322 mm 7'7" Bucket dig force 1.8 kn 11,6 lb 1.1 kn 11,491 lb 1.1 kn 11,491 lb Stick dig force 31.8 kn 711 lb 31.8 kn 711 lb 21.4 kn 20 lb Edition 40-7
Lift Capacities 416E KEY A Boom lift kg lb B Stick lift kg lb Standard Stick Extendible Stick Retracted Extendible Stick Extended Lift capacities are over-end values. Machine equipped with 2WD, OROPS, 0.76 m 3 (1 yd 3 ) general purpose bucket, and 116 kg (2 lb) counterweight. Extendible stick includes 488 kg (107 lb) counterweight. -8 Edition 40
420E/420E IT IT Loader General Purpose General Purpose General Purpose MACHINE DIMENSIONS 0.96 m 3 (1.2 yd 3 ) 1.0 m 3 (1.31 yd 3 ) 1.07 m 3 (1.4 yd 3 ) 1) Overall transport length 7343 mm 24'1" 7311 mm 24'0" 7378 mm 24'2" Overall length 7290 mm 23'11" 724 mm 23'9" 7307 mm 24'0" 2) Overall transport height 377 mm 11'9" 377 mm 11'9" 377 mm 11'9" Overall width 2438 mm 8'0" 2438 mm 8'0" 2438 mm 8'0" 3) Height to top of cab/canopy 2819 mm 9'3" 2819 mm 9'3" 2819 mm 9'3" 4) Height to top of exhaust stack 274 mm 9'0" 274 mm 9'0" 274 mm 9'0" Ground clearance (minimum) 320 mm 1'1" 320 mm 1'1" 320 mm 1'1" ) Rear axle centerline to front grill 2704 mm 8'10" 2704 mm 8'10" 2704 mm 8'10" Front wheel tread gauge 1880 mm 6'2" 1880 mm 6'2" 1880 mm 6'2" Rear wheel tread gauge 1727 mm '8" 1727 mm '8" 1727 mm '8" 6) Wheelbase (2WD/AWD) 2200 mm 7'3" 2200 mm 7'3" 2200 mm 7'3" Multi Purpose Multi Purpose MACHINE DIMENSIONS 1.0 m 3 (1.3 yd 3 ) 1.1 m 3 (1.4 yd 3 ) 1) Overall transport length 7307 mm 24'0" 7307 mm 24'0" Overall length 7206 mm 23'8" 7206 mm 23'8" 2) Overall transport height 377 mm 11'9" 377 mm 11'9" Overall width 2438 mm 8'0" 2438 mm 8'0" 3) Height to top of cab/canopy 2819 mm 9'3" 2819 mm 9'3" 4) Height to top of exhaust stack 274 mm 9'0" 274 mm 9'0" Ground clearance (minimum) 320 mm 1'1" 320 mm 1'1" ) Rear axle centerline to front grill 2704 mm 8'10" 2704 mm 8'10" Front wheel tread gauge 1880 mm 6'2" 1880 mm 6'2" Rear wheel tread gauge 1727 mm '8" 1727 mm '8" 6) Wheelbase (2WD/AWD) 2200 mm 7'3" 2200 mm 7'3" Edition 40-9
420E/420E IT IT Loader IT Loader with Quick Coupler MACHINE DIMENSIONS General Purpose General Purpose Multi Purpose Multi Purpose 0.96 m 3 (1.2 yd 3 ) 1.0 m 3 (1.31 yd 3 ) 1.0 m 3 (1.3 yd 3 ) 1.1 m 3 (1.4 yd 3 ) 1) Overall transport length 7434 mm 24'" 7402 mm 24'3" 7363 mm 24'2" 7363 mm 24'2" Overall length 7399 mm 24'3" 734 mm 24'2" 7307 mm 24'0" 7307 mm 24'0" 2) Overall transport height 377 mm 11'9" 377 mm 11'9" 377 mm 11'9" 377 mm 11'9" Overall width 2438 mm 8'0" 2438 mm 8'0" 2438 mm 8'0" 2438 mm 8'0" 3) Height to top of cab/canopy 2819 mm 9'3" 2819 mm 9'3" 2819 mm 9'3" 2819 mm 9'3" 4) Height to top of exhaust stack 274 mm 9'0" 274 mm 9'0" 274 mm 9'0" 274 mm 9'0" Ground clearance (minimum) 320 mm 1'1" 320 mm 1'1" 320 mm 1'1" 320 mm 1'1" ) Rear axle centerline to front grill 2704 mm 8'10" 2704 mm 8'10" 2704 mm 8'10" 2704 mm 8'10" Front wheel tread gauge 1880 mm 6'2" 1880 mm 6'2" 1880 mm 6'2" 1880 mm 6'2" Rear wheel tread gauge 1727 mm '8" 1727 mm '8" 1727 mm '8" 1727 mm '8" 6) Wheelbase (2WD/AWD) 2200 mm 7'3" 2200 mm 7'3" 2200 mm 7'3" 2200 mm 7'3" -10 Edition 40
420E/420E IT LOADER BUCKET DIMENSIONS General Purpose General Purpose General Purpose AND PERFORMANCE 0.96 m 3 (1.2 yd 3 ) 1.0 m 3 (1.31 yd 3 ) 1.07 m 3 (1.4 yd 3 ) Capacity (SAE) rated 0.96 m 3 1.2 yd 3 1.0 m 3 1.31 yd 3 1.07 m 3 1.4 yd 3 Width 2262 mm 7'" 2406 mm 7'11" 2262 mm 7'" Lift capacity at maximum height 2929 kg 647 lb 2937 kg 647 lb 2868 kg 6323 lb Breakout force 4.6 kn 10,242 lb 46.3 kn 10,401 lb 4.1 kn 10,130 lb 7) Maximum hinge pin height (2WD) 3296 mm 10'10" 3296 mm 10'10" 3296 mm 10'10" Maximum hinge pin height (4WD) 3368 mm 11'1" 3368 mm 11'1" 3368 mm 11'1" 8) Dump angle at full height 44 44 44 Dump height at maximum angle 273 mm 8'" 2604 mm 8'7" 20 mm 8'4" 9) Dump reach at maximum angle 83 mm 2'10" 821 mm 2'8" 819 mm 2'8" 10) Maximum bucket rollback at ground level 39 39 40 11) Digging depth 106 mm 4" 106 mm 4" 146 mm 6" Maximum grading angle 107 108 108 Width of dozer cutting edge N/A N/A N/A 12) Grill to bucket cutting edge, carry position 116 mm '0" 1484 mm 4'10" 11 mm '1" 13) Maximum operating height 4196 mm 13'9" 4196 mm 13'9" 4237 mm 13'11" Jaw opening maximum N/A N/A N/A Weight (does not include teeth or forks) 438 kg 967 lb 449 kg 989 lb 49 kg 1012 lb LOADER BUCKET DIMENSIONS Multi Purpose Multi Purpose AND PERFORMANCE 1.0 m 3 (1.3 yd 3 ) 1.1 m 3 (1.4 yd 3 ) Capacity (SAE) rated 1.0 m 3 1.3 yd 3 1.1 m 3 1.4 yd 3 Width 2262 mm 7'" 2406 mm 7'11" Lift capacity at maximum height 2739 kg 6038 lb 2711 kg 977 lb Breakout force 47.1 kn 10,80 lb 46.9 kn 10,46 lb 7) Maximum hinge pin height (2WD) 3296 mm 10'10" 3296 mm 10'10" Maximum hinge pin height (4WD) 3368 mm 11'1" 3368 mm 11'1" 8) Dump angle at full height 44 44 Dump height at maximum angle 2624 mm 8'7" 2624 mm 8'7" 9) Dump reach at maximum angle 761 mm 2'6" 761 mm 2'6" 10) Maximum bucket rollback at ground level 40 40 11) Digging depth 133 mm " 133 mm " Maximum grading angle 110 110 Width of dozer cutting edge 2262 mm 7'" 2406 mm 7'11" 12) Grill to bucket cutting edge, carry position 1480 mm 4'10" 1480 mm 4'10" 13) Maximum operating height 4244 mm 13'11" 4244 mm 13'11" Jaw opening maximum 790 mm 2'7" 790 mm 2'7" Weight (does not include teeth or forks) 723 kg 194 lb 71 kg 166 lb Edition 40-11
420E/420E IT IT Loader LOADER BUCKET IT Loader with Quick Coupler DIMENSIONS AND General Purpose General Purpose Multi Purpose Multi Purpose PERFORMANCE 0.96 m 3 (1.2 yd 3 ) 1.0 m 3 (1.31 yd 3 ) 1.0 m 3 (1.3 yd 3 ) 1.1 m 3 (1.4 yd 3 ) Capacity (SAE) rated 0.96 m 3 1.2 yd 3 1.00 m 3 1.31 yd 3 1.0 m 3 1.3 yd 3 1.1 m 3 1.4 yd 3 Width 2262 mm 7'" 2406 mm 7'11" 2262 mm 7'" 2406 mm 7'11" Lift capacity at maximum height 3164 kg 697 lb 3162 kg 6971 lb 2911 kg 6418 lb 2883 kg 636 lb Breakout force 47.1 kn 10,93 lb 47. kn 10,672 lb 4.6 kn 10,26 lb 4.4 kn 10,198 lb 7) Maximum hinge pin height (2WD) 3296 mm 10'10" 3296 mm 10'10" 3296 mm 10'10" 3296 mm 10'10" Maximum hinge pin height (4WD) 3368 mm 11'1" 3368 mm 11'1" 3368 mm 11'1" 3368 mm 11'1" 8) Dump angle at full height 4 4 4 4 Dump height at maximum angle 207 mm 8'2" 239 mm 8'4" 274 mm 8'" 274 mm 8'" 9) Dump reach at maximum angle 831 mm 2'9" 799 mm 2'7" 778 mm 2'7" 778 mm 2'7" 10) Maximum bucket rollback at ground level 40 40 40 40 11) Digging depth 147 mm 6" 147 mm 6" 137 mm " 137 mm " Maximum grading angle 108 110 111 111 Width of dozer cutting edge N/A N/A 2262 mm 7'" 2406 mm 7'11" 12) Grill to bucket cutting edge, carry position 1607 mm '3" 17 mm '2" 136 mm '0" 136 mm '0" 13) Maximum operating height 4260 mm 14'0" 426 mm 14'0" 433 mm 14'3" 433 mm 14'3" Jaw opening maximum N/A N/A 790 mm 2'7" 790 mm 2'7" Weight (does not include teeth or forks) 434 kg 97 lb 444 kg 978 lb 703 kg 10 lb 731 kg 1612 lb -12 Edition 40
420E/420E IT IT Loader BACKHOE DIMENSIONS Extendible Stick Extendible Stick AND PERFORMANCE Standard Stick Retracted Extended 14) Digging depth, SAE (maximum) 4360 mm 14'4" 4402 mm 14'" 46 mm 17'11" 1) Digging depth, 610 mm (2'0") flat bottom 4321 mm 14'2" 4363 mm 14'4" 420 mm 17'9" Reach from rear axle centerline at ground line 6721 mm 22'1" 6760 mm 22'2" 7769 mm 2'6" 16) Reach from swing pivot at ground line 618 mm 18'" 67 mm 18'7" 6666 mm 21'10" Maximum operating height 23 mm 18'1" mm 18'3" 6302 mm 20'8" Loading height 3636 mm 11'11" 377 mm 11'9" 414 mm 13'7" 17) Loading reach 1768 mm '10" 1868 mm 6'2" 2771 mm 9'1" Swing arc 180 180 180 Bucket rotation 20 20 20 18) Stabilizer spread, operating position (center of pad) 3310 mm 10'10" 3310 mm 10'10" 3310 mm 10'10" 19) Stabilizer spread, operating position (outside edge of pad) 3770 mm 12'4" 3770 mm 12'4" 3770 mm 12'4" Stabilizer spread, transport position 2322 mm 7'7" 2322 mm 7'7" 2322 mm 7'7" Bucket dig force 61.7 kn 13,87 lb 60.9 kn 13,863 lb 60.9 kn 13,863 lb Stick dig force 43.0 kn 9662 lb 42.8 kn 9616 lb 31.2 kn 7023 lb Edition 40-13
420E/420E IT DIMENSIONS WITH FORKS/ MATERIAL-HANDLING ARM Cat 420E IT Operating Specifications with Forks Fork Tine Length 1070 mm (3'6") 1220 mm (4'0") 1370 mm (4'6") Operating load (SAE J1197) 209 kg* 4618 lb* 202 kg* 4464 lb* 198 kg* 4317 lb* SAE load center 3 mm 1'9" 610 mm 2'0" 68 mm 2'3" Operating load (CEN 474-4) 207 kg 26 lb 2488 kg 48 lb 2467 kg 438 lb CEN load center 00 mm 1'8" 00 mm 1'8" 00 mm 1'8" Overall length (A) (forks on ground) 7717 mm 2'4" 7867 mm 2'10" 8017 mm 26'4" 66 mm 2'2" *Tip limited. Measured from nose of machine. 1427 mm 4'8" 3238 mm 10'7" 98 mm 3'3" 148 mm 4'9" (A) 20 mm 0'1" DIMENSIONS WITH FORKS/ MATERIAL-HANDLING ARM Cat 420E IT Operating Specifications with Material Handling Arm Material-Handling Arm Position Retracted Mid-Position Extended Operating load (SAE J1197 and CEN 474-4) 961 kg** 2119 lb** 608 kg** 1340 lb** 44 kg** 981 lb** Overall length, maximum 8809 mm 28'11" 9807 mm 32'2" 10 807 mm 3'" 2000 mm 6'7" 1462 mm 4'10" 241 mm 8'4" 892 mm 19'4" 6733 mm 22'1" **Hydraulically limited. Dimensions and performance specifications shown are for 4WD machines equipped with 12./80-18 SGL front tires, 19.L-24 IT2 rear tires, ROPS canopy, standard stick with 610 mm (24 in) standard duty bucket, and 0.96 m 3 (1.2 yd 3 ) loader bucket and standard equipment unless otherwise specified. 01 mm 16'7" Measured from nose of machine. 149 mm '1" 3147 mm 10'4" 1998 mm 6'7" 414 mm 13'7" 14 mm 16'11" 2996 mm 9'10" 3996 mm 13'1" -14 Edition 40 8 mm 1'11"
Lift Capacities 420E/420E IT KEY A Boom lift kg lb B Stick lift kg lb Standard Stick Extendible Stick Retracted Extendible Stick Extended Lift capacities are over-end values. Machine equipped with 2WD, OROPS, 0.96 m 3 (1.2 yd 3 ) general purpose bucket, and 116 kg (2 lb) counterweight. Extendible stick includes 488 kg (107 lb) counterweight. *Indicates lift capacity is stability limited. Edition 40-1
422E 2 3 4 3 17 1 8 9 7 12 10 6 11 13 14 1 16 MACHINE DIMENSIONS General Purpose Multi Purpose 1) Overall transport length 830 mm 19'1" 801 mm 19'0" Overall length 78 mm 18'9" 729 mm 18'7" 2) Overall transport height 3736 mm 12'2" 3736 mm 12'2" Overall width (Standard frame) 2368 mm 7'7" 2368 mm 7'7" Overall width (Narrow frame) 2262 mm 7'" 2262 mm 7'" 3) Height to top of cab/canopy 2863 mm 9'3" 2863 mm 9'3" 4) Height to top of exhaust stack 2779 mm 9'1" 2779 mm 9'1" Ground clearance (minimum) 38 mm 1'1" 38 mm 1'1" ) Rear axle centerline to front grill 2704 mm 8'8" 2704 mm 8'8" Front wheel tread gauge 1826 mm '10" 1826 mm '10" Rear wheel tread gauge 1713 mm '7" 1713 mm '7" 6) Wheelbase (AWD) 2200 mm 7'3" 2200 mm 7'3" -16 Edition 40
422E LOADER BUCKET DIMENSIONS AND (Narrow Bucket) (Standard Bucket) PERFORMANCE General Purpose Multi Purpose General Purpose Multi Purpose Capacity (SAE) rated 0.96 m 3 1.2 yd 3 0.96 m 3 1.2 yd 3 1.0 m 3 1.30 yd 3 1.03 m 3 1.34 yd 3 Width 2262 mm 7'" 2262 mm 7'" 2406 mm 7'9" 2406 mm 7'9" Lift capacity at maximum height 244 kg 410 lb 2292 kg 00 lb 2423 kg 342 lb 230 kg 082 lb Breakout force 39. kn 8880 lb 38.6 kn 8680 lb 39 kn 8767 lb 39 kn 8767 lb 7) Maximum hinge pin height 3321 mm 10'11" 3321 mm 10'11" 3314 mm 10'8" 3314 mm 10'8" 8) Dump angle at full height 43 43 44 44 Dump height at maximum angle 2633 mm 8'8" 2666 mm 8'9" 2621 mm 8'6" 263 mm 8'7" 9) Dump reach at maximum angle 794 mm 2'7" 714 mm 2'4" 843 mm 2'7" 770 mm 2'" 10) Maximum bucket rollback at ground level 39 40 38 39 11) Digging depth 78 mm 3" 109 mm 4" 91 mm 3" 118 mm 3" Maximum grading angle 109 111 109 112 Width of dozer cutting edge N/A 2396 mm 7'10" N/A 2406 mm 7'8" 12) Maximum operating height 4201 mm 13'9" 4229 mm 13'10" 4211 mm 13'8" 4238 mm 13'9" Jaw opening maximum N/A 927 mm 3'0" N/A 790 mm 2'6" Weight (does not include teeth or forks) 432 kg 93 lb 611 kg 1347 lb 441 kg 972 lb 60 kg 1334 lb BACKHOE DIMENSIONS Extendible Stick Extendible Stick AND PERFORMANCE Standard Stick Retracted Extended 13) Digging depth, manufacturers maximum 4834 mm 1'8" 4883 mm 16'0" 887 mm 19'3" 14) Digging depth, 610 mm (2'0") flat bottom 4804 mm 1'7" 4846 mm 1'9" 866 mm 19'2" 1) Reach from swing pivot at ground line 8 mm 18'2" 98 mm 18'3" 6610 mm 21'6" Loading height 3802 mm 12'4" 3743 mm 12'2" 4311 mm 14'1" 16) Loading reach 1620 mm '3" 1720 mm '6" 2623 mm 8'6" Swing arc 180 180 180 Bucket rotation 20 20 20 17) Stabilizer width (Standard frame) 2368 mm 7'7" 2368 mm 7'7" 2368 mm 7'7" Stabilizer width (Narrow frame) 2196 mm 7'2" 2196 mm 7'2" 2196 mm 7'2" Bucket dig force 2 kn 11,690 lb 1 kn 11,46 lb 1 kn 11,46 lb Stick dig force 32 kn 7193 lb 32 kn 7193 lb 24 kn 39 lb Total side shift travel (Standard frame) 128 mm 4'1" 128 mm 4'1" 128 mm 4'1" Total side shift travel (Narrow frame) 1096 mm 3'7" 1096 mm 3'7" 1096 mm 3'7" Edition 40-17
428E 2 3 4 3 17 1 8 9 7 12 10 6 11 13 14 1 16 Parallel Loader MACHINE DIMENSIONS General Purpose Multi Purpose General Purpose Multi Purpose 1) Overall transport length 881 mm 19'3" 86 mm 19'2" 760 mm 18'11" 68 mm 18'8" Overall length 8 mm 19'2" 799 mm 19'0" 710 mm 18'9" 60 mm 18'6" 2) Overall transport height 3736 mm 12'2" 3736 mm 12'2" 3740 mm 12'3" 3740 mm 12'3" Overall width (Standard frame) 2368 mm 7'7" 2368 mm 7'7" 2396 mm 7'10" 2406 mm 7'11" Overall width (Narrow frame) 2262 mm 7'" 2262 mm 7'" 2262 mm 7'" 2262 mm 7'" 3) Height to top of cab/canopy 2863 mm 9'3" 2863 mm 9'3" 2900 mm 9'6" 2900 mm 9'6" 4) Height to top of exhaust stack 2779 mm 9'1" 2779 mm 9'1" 2700 mm 8'10" 2700 mm 8'10" Ground clearance (minimum) 38 mm 1'1" 38 mm 1'1" 320 mm 1'1" 320 mm 1'1" ) Rear axle centerline to front grill 2704 mm 8'8" 2704 mm 8'8" 2613 mm 8'7" 2613 mm 8'7" Front wheel tread gauge 191 mm 6'2" 191 mm 6'2" 1780 mm '10" 1780 mm '10" Rear wheel tread gauge 1713 mm '7" 1713 mm '7" 1714 mm '8" 1714 mm '8" 6) Wheelbase (AWD) 2200 mm 7'3" 2200 mm 7'3" 2200 mm 7'3" 2200 mm 7'3" -18 Edition 40
428E LOADER BUCKET Parallel Loader DIMENSIONS AND (Narrow Bucket) (Narrow Bucket) PERFORMANCE General Purpose Multi Purpose General Purpose Multi Purpose Capacity (SAE) rated 0.96 m 3 1.2 yd 3 0.96 m 3 1.2 yd 3 0.96 m 3 1.2 yd 3 0.96 m 3 1.2 yd 3 Width 2262 mm 7'" 2262 mm 7'" 2262 mm 7'" 2262 mm 7'" Lift capacity at maximum height 3468 kg 7646 lb 3232 kg 712 lb 2997 kg 6607 lb 2806 kg 6186 lb Breakout force 1 kn 11,46 lb 6.6 kn 12,72 lb 47 kn 10,70 lb 4.9 kn 10,320 lb 7) Maximum hinge pin height 3321 mm 10'11" 3321 mm 10'11" 3321 mm 10'11" 3321 mm 10'11" 8) Dump angle at full height 47 47 43 43 Dump height at maximum angle 2613 mm 8'7" 260 mm 8'8" 2633 mm 8'8" 2666 mm 8'9" 9) Dump reach at maximum angle 764 mm 2'6" 68 mm 2'3" 794 mm 2'7" 714 mm 2'4" 10) Maximum bucket rollback at ground level 40 40 39 40 11) Digging depth 77 mm 3" 108 mm 4" 78 mm 3" 109 mm 4" Maximum grading angle 111 114 109 111 Width of dozer cutting edge N/A 2406 mm 7'11" N/A 2406 mm 7'11" 12) Maximum operating height 4201 mm 13'9" 4229 mm 13'10" 4201 mm 13'9" 4229 mm 13'10" Jaw opening maximum N/A 927 mm 3'0" N/A 927 mm 3'0" Weight (does not include teeth or forks) 426 kg 939 lb 47 kg 1206 lb 432 kg 92 lb 611 kg 1347 lb LOADER BUCKET Parallel Loader DIMENSIONS AND (Standard Bucket) (Standard Bucket) PERFORMANCE General Purpose Multi Purpose General Purpose Multi Purpose Capacity (SAE) rated 1.0 m 3 1.30 yd 3 1.03 m 3 1.34 yd 3 1.0 m 3 1.31 yd 3 1.03 m 3 1.3 yd 3 Width 2406 mm 7'9" 2406 mm 7'9" 2396 mm 7'10" 2406 mm 7'11" Lift capacity at maximum height 3389 kg 7471 lb 3219 kg 7096 lb 2917 kg 6432 lb 2726 kg 6010 lb Breakout force 1 kn 11,46 lb kn 12,364 lb 46.3 kn 10,418 lb 4.2 kn 10,170 lb 7) Maximum hinge pin height 3340 mm 10'9" 3340 mm 10'9" 3321 mm 10'11" 3321 mm 10'11" 8) Dump angle at full height 4 4 43 43 Dump height at maximum angle 2634 mm 8'6" 2668 mm 8'7" 2633 mm 8'8" 2666 mm 8'9" 9) Dump reach at maximum angle 79 mm 2'6" 724 mm 2'3" 794 mm 2'7" 714 mm 2'4" 10) Maximum bucket rollback at ground level 39 39 39 40 11) Digging depth 91 mm 3" 118 mm 4" 78 mm 3" 109 mm 4" Maximum grading angle 112 11 109 111 Width of dozer cutting edge N/A 2406 mm 7'9" N/A 2406 mm 7'11" 12) Maximum operating height 4238 mm 13'9" 4264 mm 13'10" 4201 mm 13'9" 4229 mm 13'10" Jaw opening maximum N/A 790 mm 2'6" N/A 927 mm 3'0" Weight (does not include teeth or forks) 428 kg 943 lb 611 kg 1347 lb 44 kg 981 lb 700 kg 144 lb Edition 40-19
428E 2 3 4 3 17 1 8 9 7 12 10 6 11 13 14 1 16 BACKHOE DIMENSIONS Extendible Stick Extendible Stick AND PERFORMANCE Standard Stick Retracted Extended 13) Digging depth, manufacturers maximum 488 mm 1'9" 4898 mm 16'0" 901 mm 19'3" 14) Digging depth, 610 mm (2'0") flat bottom 4822 mm 1'8" 4863 mm 1'9" 879 mm 19'2" 1) Reach from swing pivot at ground line 88 mm 18'3" 628 mm 18'4" 6639 mm 21'7" Loading height 3743 mm 12'2" 3684 mm 12'0" 422 mm 13'9" 16) Loading reach 1710 mm '6" 1810 mm '9" 2713 mm 8'9" Swing arc 180 180 180 Bucket rotation 20 20 20 17) Stabilizer width (Standard frame) 2368 mm 7'7" 2368 mm 7'7" 2368 mm 7'7" Stabilizer width (Narrow frame) 2196 mm 7'2" 2196 mm 7'2" 2196 mm 7'2" Bucket dig force 2 kn 11,690 lb 1 kn 11,46 lb 1 kn 11,46 lb Stick dig force 32 kn 7193 lb 32 kn 7193 lb 23 kn 170 lb Total side shift travel (Standard frame) 128 mm 4'1" 128 mm 4'1" 128 mm 4'1" Total side shift travel (Narrow frame) 1096 mm 3'7" 1096 mm 3'7" 1096 mm 3'7" -20 Edition 40
430E/430E IT IT Loader General Purpose General Purpose General Purpose MACHINE DIMENSIONS 1.0 m 3 (1.31 yd 3 ) 1.07 m 3 (1.4 yd 3 ) 1.1 m 3 (1. yd 3 ) 1) Overall transport length 736 mm 24'2" 7424 mm 24'4" 7424 mm 24'4" Overall length 7303 mm 24'0" 7366 mm 24'2" 7366 mm 24'2" 2) Overall transport height 3866 mm 12'8" 3866 mm 12'8" 3866 mm 12'8" Overall width 2438 mm 8'0" 2438 mm 8'0" 2438 mm 8'0" 3) Height to top of cab/canopy 2819 mm 9'3" 2819 mm 9'3" 2819 mm 9'3" 4) Height to top of exhaust stack 274 mm 9'0" 274 mm 9'0" 274 mm 9'0" Ground clearance (minimum) 320 mm 1'1" 320 mm 1'1" 320 mm 1'1" ) Rear axle centerline to front grill 2704 mm 8'10" 2704 mm 8'10" 2704 mm 8'10" Front wheel tread gauge 1880 mm 6'2" 1880 mm 6'2" 1880 mm 6'2" Rear wheel tread gauge 1727 mm '8" 1727 mm '8" 1727 mm '8" 6) Wheelbase (2WD/AWD) 2200 mm 7'3" 2200 mm 7'3" 2200 mm 7'3" Multi Purpose Multi Purpose MACHINE DIMENSIONS 1.0 m 3 (1.3 yd 3 ) 1.1 m 3 (1.4 yd 3 ) 1) Overall transport length 732 mm 24'1" 732 mm 24'1" Overall length 7264 mm 23'10" 7264 mm 23'10" 2) Overall transport height 3866 mm 12'8" 3866 mm 12'8" Overall width 2438 mm 8'0" 2438 mm 8'0" 3) Height to top of cab/canopy 2819 mm 9'3" 2819 mm 9'3" 4) Height to top of exhaust stack 274 mm 9'0" 274 mm 9'0" Ground clearance (minimum) 320 mm 1'1" 320 mm 1'1" ) Rear axle centerline to front grill 2704 mm 8'10" 2704 mm 8'10" Front wheel tread gauge 1880 mm 6'2" 1880 mm 6'2" Rear wheel tread gauge 1727 mm '8" 1727 mm '8" 6) Wheelbase (2WD/AWD) 2200 mm 7'3" 2200 mm 7'3" Edition 40-21
430E/430E IT IT Loader IT Loader with Quick Coupler MACHINE DIMENSIONS General Purpose General Purpose Multi Purpose Multi Purpose 1.0 m 3 (1.31 yd 3 ) 1.1 m 3 (1. yd 3 ) 1.0 m 3 (1.3 yd 3 ) 1.1 m 3 (1.4 yd 3 ) 1) Overall transport length 7447 mm 24'" 7471 mm 24'6" 7409 mm 24'4" 7409 mm 24'4" Overall length 7412 mm 24'4" 74 mm 24'6" 7366 mm 24'2" 7366 mm 24'2" 2) Overall transport height 3866 mm 12'8" 3866 mm 12'8" 3866 mm 12'8" 3866 mm 12'8" Overall width 2438 mm 8'0" 2438 mm 8'0" 2438 mm 8'0" 2438 mm 8'0" 3) Height to top of cab/canopy 2819 mm 9'3" 2819 mm 9'3" 2819 mm 9'3" 2819 mm 9'3" 4) Height to top of exhaust stack 274 mm 9'0" 274 mm 9'0" 274 mm 9'0" 274 mm 9'0" Ground clearance (minimum) 320 mm 1'1" 320 mm 1'1" 320 mm 1'1" 320 mm 1'1" ) Rear axle centerline to front grill 2704 mm 8'10" 2704 mm 8'10" 2704 mm 8'10" 2704 mm 8'10" Front wheel tread gauge 1880 mm 6'2" 1880 mm 6'2" 1880 mm 6'2" 1880 mm 6'2" Rear wheel tread gauge 1727 mm '8" 1727 mm '8" 1727 mm '8" 1727 mm '8" 6) Wheelbase (2WD/AWD) 2200 mm 7'3" 2200 mm 7'3" 2200 mm 7'3" 2200 mm 7'3" -22 Edition 40
430E/430E IT LOADER BUCKET DIMENSIONS General Purpose General Purpose General Purpose AND PERFORMANCE 1.0 m 3 (1.31 yd 3 ) 1.07 m 3 (1.4 yd 3 ) 1.1 m 3 (1. yd 3 ) Capacity (SAE) rated 1.0 m 3 1.31 yd 3 1.07 m 3 1.40 yd 3 1.1 m 3 1. yd 3 Width 2406 mm 7'11" 2262 mm 7'" 2406 mm 7'11" Lift capacity at maximum height 2937 kg 647 lb 2868 kg 6323 lb 2849 kg 6281 lb Breakout force 46.3 kn 10,401 lb 4.1 kn 10,130 lb 44.9 kn 10,091 lb 7) Maximum hinge pin height (2WD) 3296 mm 10'10" 3296 mm 10'10" 3296 mm 10'10" Maximum hinge pin height (4WD) 3368 mm 11'1" 3368 mm 11'1" 3368 mm 11'1" 8) Dump angle at full height 44 44 44 Dump height at maximum angle 2604 mm 8'7" 20 mm 8'4" 20 mm 8'4" 9) Dump reach at maximum angle 821 mm 2'8" 819 mm 2'8" 819 mm 2'8" 10) Maximum bucket rollback at ground level 39 40 40 11) Digging depth 106 mm 4" 146 mm 6" 146 mm 6" Maximum grading angle 108 108 108 Width of dozer cutting edge N/A N/A N/A 12) Grill to bucket cutting edge, carry position 1484 mm 4'10" 11 mm '1" 11 mm '1" 13) Maximum operating height 4193 mm 13'9" 4237 mm 13'11" 4237 mm 13'11" Jaw opening maximum N/A N/A N/A Weight (does not include teeth or forks) 449 kg 989 lb 49 kg 1012 lb 479 kg 106 lb LOADER BUCKET DIMENSIONS Multi Purpose Multi Purpose AND PERFORMANCE 1.0 m 3 (1.3 yd 3 ) 1.1 m 3 (1.4 yd 3 ) Capacity (SAE) rated 1.0 m 3 1.3 yd 3 1.1 m 3 1.4 yd 3 Width 2262 mm 7'" 2406 mm 7'11" Lift capacity at maximum height 2739 kg 6038 lb 2711 kg 977 lb Breakout force 47.1 kn 10,80 lb 46.9 kn 10,46 lb 7) Maximum hinge pin height (2WD) 3296 mm 10'10" 3296 mm 10'10" Maximum hinge pin height (4WD) 3368 mm 11'1" 3368 mm 11'1" 8) Dump angle at full height 44 44 Dump height at maximum angle 2624 mm 8'7" 2624 mm 8'7" 9) Dump reach at maximum angle 761 mm 2'6" 761 mm 2'6" 10) Maximum bucket rollback at ground level 40 40 11) Digging depth 133 mm " 133 mm " Maximum grading angle 110 110 Width of dozer cutting edge 2262 mm 7'" 2406 mm 7'11" 12) Grill to bucket cutting edge, carry position 1480 mm 4'10" 1480 mm 4'10" 13) Maximum operating height 4244 mm 13'11" 4244 mm 13'11" Jaw opening maximum 790 mm 2'7" 790 mm 2'7" Weight (does not include teeth or forks) 723 kg 194 lb 71 kg 166 lb Edition 40-23
430E/430E IT IT Loader LOADER BUCKET IT Loader with Quick Coupler DIMENSIONS AND General Purpose General Purpose Multi Purpose Multi Purpose PERFORMANCE 1.0 m 3 (1.31 yd 3 ) 1.1 m 3 (1. yd 3 ) 1.0 m 3 (1.3 yd 3 ) 1.1 m 3 (1.4 yd 3 ) Capacity (SAE) rated 1.00 m 3 1.31 yd 3 1.1 m 3 1.0 yd 3 1.0 m 3 1.3 yd 3 1.1 m 3 1.4 yd 3 Width 2406 mm 7'11" 2406 mm 7'11" 2262 mm 7'" 2406 mm 7'11" Lift capacity at maximum height 3162 kg 6971 lb 3131 kg 6903 lb 2911 kg 6418 lb 2883 kg 636 lb Breakout force 47. kn 10,672 lb 46.8 kn 10,2 lb 4.6 kn 10,26 lb 4.4 kn 10,198 lb 7) Maximum hinge pin height (2WD) 3296 mm 10'10" 3296 mm 10'10" 3296 mm 10'10" 3296 mm 10'10" Maximum hinge pin height (4WD) 3368 mm 11'1" 3368 mm 11'1" 3368 mm 11'1" 3368 mm 11'1" 8) Dump angle at full height 4 4 4 4 Dump height at maximum angle 239 mm 8'4" 209 mm 8'3" 274 mm 8'" 274 mm 8'" 9) Dump reach at maximum angle 799 mm 2'7" 830 mm 2'9" 778 mm 2'7" 778 mm 2'7" 10) Maximum bucket rollback at ground level 40 40 40 40 11) Digging depth 147 mm 6" 146 mm 6" 137 mm " 137 mm " Maximum grading angle 110 108 111 111 Width of dozer cutting edge N/A N/A 2262 mm 7'" 2406 mm 7'11" 12) Grill to bucket cutting edge, carry position 17 mm '2" 198 mm '3" 136 mm '0" 136 mm '0" 13) Maximum operating height 426 mm 14'0" 433 mm 14'3" 433 mm 14'3" 433 mm 14'3" Jaw opening maximum N/A N/A 790 mm 2'7" 790 mm 2'7" Weight (does not include teeth or forks) 444 kg 978 lb 468 kg 1032 lb 703 kg 10 lb 731 kg 1612 lb -24 Edition 40
430E/430E IT IT Loader BACKHOE DIMENSIONS Extendible Stick Extendible Stick AND PERFORMANCE Standard Stick Retracted Extended 14) Digging depth, SAE (maximum) 4698 mm 1'" 4809 mm 1'9" 91 mm 19'6" 1) Digging depth, 610 mm (2'0") flat bottom 4672 mm 1'4" 4783 mm 1'8" 92 mm 19'" Reach from rear axle centerline at ground line 712 mm 23'6" 727 mm 23'10" 830 mm 27'" 16) Reach from swing pivot at ground line 6049 mm 19'10" 614 mm 20'2" 7247 mm 23'9" Maximum operating height 6009 mm 19'9" 6096 mm 20'0" 6990 mm 22'11" Loading height 396 mm 13'0" 3912 mm 12'10" 420 mm 14'10" 17) Loading reach 1774 mm '10" 1948 mm 6'" 2916 mm 9'7" Swing arc 180 180 180 Bucket rotation 20 20 20 18) Stabilizer spread, operating position (center of pad) 3310 mm 10'10" 3310 mm 10'10" 3310 mm 10'10" 19) Stabilizer spread, operating position (outside edge of pad) 3770 mm 12'4" 3770 mm 12'4" 3770 mm 12'4" Stabilizer spread, transport position 2322 mm 7'7" 2322 mm 7'7" 2322 mm 7'7" Bucket dig force 70.7 kn 1,892 lb 69.7 kn 1,680 lb 69.7 kn 1,680 lb Stick dig force 44.2 kn 9940 lb 43.3 kn 9730 lb 32.0 kn 7197 lb Edition 40-2
430E/430E IT DIMENSIONS WITH FORKS/ MATERIAL-HANDLING ARM Cat 430E IT Operating Specifications with Forks Fork Tine Length 1070 mm (3'6") 1220 mm (4'0") 1370 mm (4'6") Operating load (SAE J1197) 2200 kg 480 lb* 2127 kg 4689 lb* 208 kg 436 lb* SAE load center 3 mm 1'9" 610 mm 2'0" 68 mm 2'3" Operating load (CEN 474-4) 207 kg 26 lb 2488 kg 48 lb 2467 kg 438 lb CEN load center 00 mm 1'8" 00 mm 1'8" 00 mm 1'8" Overall length (A) (forks on ground) 787 mm 2'9" 8007 mm 26'3" 817 mm 26'9" 66 mm 2'2" *Tip limited. Measured from nose of machine. 1427 mm 4'8" 3238 mm 10'7" 98 mm 3'3" 148 mm 4'9" (A) DIMENSIONS WITH FORKS/ MATERIAL-HANDLING ARM 2000 mm 6'7" 1462 mm 4'10" 241 mm 8'4" 20 mm 1" Cat 430E IT Operating Specifications with Material-Handling Arm Material-Handling Arm Position Retracted Mid-Position Extended Operating load (SAE J1197 and CEN 474-4) 961 kg 2119 lb** 608 kg 1340 lb** 44 kg 981 lb** Overall length, maximum 8948 mm 29'4" 9948 mm 32'8" 10 947 mm 3'11" 01 mm 16'7" 892 mm 19'4" 6733 mm 22'1" **Hydraulically limited. Dimensions and performance specifications shown are for 4WD machines equipped with 12./80-18 SGL front tires, 19.L-24 IT2 rear tires, ROPS canopy, standard stick with 610 mm (24 in) standard duty bucket, and 1.00 m 3 (1.31 yd 3 ) loader bucket and standard equipment unless otherwise specified. Measured from nose of machine. 149 mm '1" 3147 mm 10'4" 14 mm 16'11" 414 mm 13'7" 1998 mm 6'7" 2996 mm 9'10" 3996 mm 13'1" 8 mm 1'11" -26 Edition 40
Lift Capacities 430E/430E IT KEY A Boom lift kg lb B Stick lift kg lb Standard Stick Extendible Stick Retracted Extendible Stick Extended Lift capacities are over-end values. Machine equipped with 4WD, OROPS, 1.0 m 3 (1.31 yd 3 ) general purpose bucket, and 116 kg (2 lb) counterweight. Extendible stick includes 488 kg (107 lb) counterweight. *Indicates lift capacity is stability limited. Edition 40-27
432E 2 Parallel Loader 3 4 3 17 1 9 8 7 12 10 6 11 13 14 1 16 Parallel Loader MACHINE DIMENSIONS General Purpose Multi Purpose 1) Overall transport length 836 mm 19'1" 811 mm 19'0" Overall length 810 mm 19'0" 74 mm 18'8" 2) Overall transport height 3736 mm 12'2" 3736 mm 12'2" Overall width 2368 mm 7'7" 2368 mm 7'7" 3) Height to top of cab/canopy 2863 mm 9'3" 2863 mm 9'3" 4) Height to top of exhaust stack 2779 mm 9'1" 2779 mm 9'1" Ground clearance (minimum) 38 mm 1'1" 38 mm 1'1" ) Rear axle centerline to front grill 2704 mm 8'8" 2704 mm 8'8" Front wheel tread gauge 191 mm 6'2" 191 mm 6'2" Rear wheel tread gauge 1713 mm '6" 1713 mm '6" 6) Wheelbase (AWD) 2200 mm 7'3" 2200 mm 7'3" -28 Edition 40
432E LOADER BUCKET DIMENSIONS Parallel Loader AND PERFORMANCE General Purpose Multi Purpose Capacity (SAE) rated 1.0 m 3 1.30 yd 3 1.03 m 3 1.34 yd 3 Width 2406 mm 7'8" 2406 mm 7'8" Lift capacity at maximum height 3389 kg 7471 lb 3389 kg 7471 lb Breakout force 1 kn 11,46 lb kn 12,364 lb 7) Maximum hinge pin height 3340 mm 10'9" 3340 mm 10'9" 8) Dump angle at full height 4 4 Dump height at maximum angle 2634 mm 8'6" 2668 mm 8'7" 9) Dump reach at maximum angle 79 mm 2'6" 724 mm 2'3" 10) Maximum bucket rollback at ground level 39 39 11) Digging depth 91 mm 3" 118 mm 4" Maximum grading angle 112 11 Width of dozer cutting edge N/A 2406 mm 7'8" 12) Maximum operating height 4238 mm 13'9" 4264 mm 13'9" Jaw opening maximum N/A 790 mm 2'7" Weight (does not include teeth or forks) 428 kg 944 lb 611 kg 1347 lb BACKHOE DIMENSIONS Extendible Stick Extendible Stick AND PERFORMANCE Standard Stick Retracted Extended 13) Digging depth, manufacturers maximum 4834 mm 1'8" 4883 mm 16'0" 888 mm 19'3" 14) Digging depth, 610 mm (2'0") flat bottom 480 mm 1'7" 4846 mm 1'8" 866 mm 19'2" 1) Reach from swing pivot at ground line 88 mm 18'3" 628 mm 18'4" 6639 mm 21'7" Loading height 3743 mm 12'2" 3684 mm 12'0" 422 mm 13'9" 16) Loading reach 1710 mm '6" 1810 mm '9" 2713 mm 8'9" Swing arc 180 180 180 Bucket rotation 20 20 20 17) Stabilizer width 2368 mm 7'7" 2368 mm 7'7" 2368 mm 7'7" Bucket dig force 7 kn 12,814 lb 6 kn 12,89 lb 6 kn 12,89 lb Stick dig force 43 kn 9666 lb 43 kn 9666 lb 31 kn 6969 lb Total side shift travel 128 mm 4'1" 128 mm 4'1" 128 mm 4'1" Edition 40-29
434E 2 Parallel Loader 3 4 3 17 1 9 8 7 12 10 6 11 13 14 1 16 Parallel Loader MACHINE DIMENSIONS General Purpose Multi Purpose 1) Overall transport length 6120 mm 20'0" 6099 mm 20'0" Overall length 6120 mm 20'0" 6099 mm 20'0" 2) Overall transport height 3623 mm 11'8" 3623 mm 11'8" Overall width 2368 mm 7'7" 2368 mm 7'7" 3) Height to top of cab/canopy 2801 mm 9'1" 2801 mm 9'1" 4) Height to top of exhaust stack 2733 mm 8'9" 2733 mm 8'9" Ground clearance (minimum) 32 mm 1'0" 32 mm 1'0" ) Rear axle centerline to front grill 2743 mm 8'10" 2743 mm 8'10" Front wheel tread gauge 1914 mm 6'2" 1914 mm 6'2" Rear wheel tread gauge 1914 mm 6'2" 1914 mm 6'2" 6) Wheelbase (AWD) 2200 mm 7'3" 2200 mm 7'3" -30 Edition 40
434E LOADER BUCKET DIMENSIONS Parallel Loader AND PERFORMANCE General Purpose Multi Purpose Capacity (SAE) rated 1.1 m 3 1. yd 3 1.1 m 3 1. yd 3 Width 2434 mm 7'9" 2434 mm 7'9" Lift capacity at maximum height 308 kg 7733 lb 320 kg 706 lb Breakout force 4 kn 12,139 lb 3 kn 11,914 lb 7) Maximum hinge pin height 3442 mm 11'2" 3442 mm 11'2" 8) Dump angle at full height 4 4 Dump height at maximum angle 2666 mm 8'7" 2681 mm 8'7" 9) Dump reach at maximum angle 79 mm 2'6" 79 mm 2'6" 10) Maximum bucket rollback at ground level 41 41 11) Digging depth 229 mm 7" 229 mm 7" Maximum grading angle 107 107 Width of dozer cutting edge 2434 mm 7'9" 12) Maximum operating height 4339 mm 14'2" 4409 mm 14'4" Jaw opening maximum 790 mm 2'7" Weight (does not include teeth or forks) 438 kg 96 lb 744 kg 1460 lb BACKHOE DIMENSIONS Extendible Stick Extendible Stick AND PERFORMANCE Standard Stick Retracted Extended 13) Digging depth, manufacturers maximum 4933 mm 16'1" 4972 mm 16'3" 974 mm 19'6" 14) Digging depth, 610 mm (2'0") flat bottom 4906 mm 16'0" 4947 mm 16'2" 92 mm 19'" 1) Reach from swing pivot at ground line 638 mm 18'4" 678 mm 18'6" 6687 mm 21'9" Loading height 3632 mm 11'9" 374 mm 11'7" 4142 mm 13'" 16) Loading reach 187 mm 6'1" 197 mm 6'4" 2878 mm 9'4" Swing arc 180 180 180 Bucket rotation 20 20 20 17) Stabilizer width 2368 mm 7'7" 2368 mm 7'7" 2368 mm 7'7" Bucket dig force 7 kn 12,814 lb 6 kn 12,89 lb 6 kn 12,89 lb Stick dig force 43 kn 9666 lb 43 kn 9666 lb 31 kn 6969 lb Total side shift travel 128 mm 4'1" 128 mm 4'1" 128 mm 4'1" Edition 40-31
442E 2 Parallel Loader 3 4 3 17 1 9 8 7 12 10 6 11 13 14 1 16 Parallel Loader MACHINE DIMENSIONS General Purpose Multi Purpose 1) Overall transport length 834 mm 19'1" 810 mm 19'0" Overall length 809 mm 19'0" 72 mm 18'8" 2) Overall transport height 3914 mm 12'8" 3914 mm 12'8" Overall width 2368 mm 7'7" 2368 mm 7'7" 3) Height to top of cab/canopy 2863 mm 9'3" 2863 mm 9'3" 4) Height to top of exhaust stack 2779 mm 9'1" 2779 mm 9'1" Ground clearance (minimum) 38 mm 1'1" 38 mm 1'1" ) Rear axle centerline to front grill 2704 mm 8'8" 2704 mm 8'8" Front wheel tread gauge 191 mm 6'2" 191 mm 6'2" Rear wheel tread gauge 1713 mm '6" 1713 mm '6" Rear wheel tread gauge (AWS) 1890 mm 6'2" 1890 mm 6'2" 6) Wheelbase (AWD) 2200 mm 7'3" 2200 mm 7'3" -32 Edition 40
442E LOADER BUCKET DIMENSIONS Parallel Loader AND PERFORMANCE General Purpose Multi Purpose Capacity (SAE) rated 1.0 m 3 1.30 yd 3 1.03 m 3 1.34 yd 3 Width 2406 mm 7'8" 2406 mm 7'8" Lift capacity at maximum height 3389 kg 7471 lb 3219 kg 7096 lb Breakout force 1 kn 11,46 lb kn 12,364 lb 7) Maximum hinge pin height 3340 mm 10'9" 3340 mm 10'9" 8) Dump angle at full height 4 4 Dump height at maximum angle 2634 mm 8'6" 2634 mm 8'6" 9) Dump reach at maximum angle 79 mm 2'6" 79 mm 2'6" 10) Maximum bucket rollback at ground level 39 39 11) Digging depth 91 mm 3" 118 mm 4" Maximum grading angle 112 11 Width of dozer cutting edge N/A 2406 mm 7'8" 12) Maximum operating height 4238 mm 13'9" 4264 mm 13'9" Jaw opening maximum N/A 790 mm 2'7" Weight (does not include teeth or forks) 428 kg 944 lb 611 kg 1347 lb BACKHOE DIMENSIONS Extendible Stick Extendible Stick AND PERFORMANCE Standard Stick Retracted Extended 13) Digging depth, manufacturers maximum 247 mm 17'2" 3 mm 17'" 649 mm 21'1" 14) Digging depth, 610 mm (2'0") flat bottom 203 mm 17'0" 309 mm 17'4" 6432 mm 21'1" 1) Reach from swing pivot at ground line 6022 mm 19'7" 6127 mm 20'1" 7222 mm 23'6" Loading height 4060 mm 13'3" 4016 mm 13'1" 462 mm 1'1" 16) Loading reach 1713 mm '6" 1887 mm 6'1" 28 mm 9'3" Swing arc 180 180 180 Bucket rotation 20 20 20 17) Stabilizer width 2368 mm 7'7" 2368 mm 7'7" 2368 mm 7'7" Bucket dig force 71 kn 1,961 lb 70 kn 1,736 lb 70 kn 1,736 lb Stick dig force 44 kn 9891 lb 43 kn 9666 lb 32 kn 7193 lb Total side shift travel 128 mm 4'1" 128 mm 4'1" 128 mm 4'1" Edition 40-33
444E Parallel Loader 2 3 4 3 17 1 9 8 7 12 10 6 11 13 14 1 16 Parallel Loader MACHINE DIMENSIONS General Purpose Multi Purpose 1) Overall transport length 6099 mm 20'0" 6119 mm 20'0" Overall length 608 mm 19'9" 611 mm 20'0" 2) Overall transport height 3871 mm 12'7" 3871 mm 12'7" Overall width 2368 mm 7'7" 2368 mm 7'7" 3) Height to top of cab/canopy 281 mm 9'3" 281 mm 9'3" 4) Height to top of exhaust stack 2783 mm 9'1" 2783 mm 9'1" Ground clearance (minimum) 37 mm 1'0" 37 mm 1'0" ) Rear axle centerline to front grill 2743 mm 8'10" 2743 mm 8'10" Front wheel tread gauge 1914 mm 6'2" 1914 mm 6'2" Rear wheel tread gauge 1914 mm 6'2" 1914 mm 6'2" 6) Wheelbase (AWD) 2200 mm 7'3" 2200 mm 7'3" -34 Edition 40
444E LOADER BUCKET DIMENSIONS Parallel Loader AND PERFORMANCE General Purpose Multi Purpose Capacity (SAE) rated 1.3 m 3 1.7 yd 3 1.3 m 3 1.7 yd 3 Width 2434 mm 7'9" 2434 mm 7'9" Lift capacity at maximum height 3911 kg 8622 lb 3607 kg 792 lb Breakout force 64 kn 14,387 lb 60 kn 13,488 lb 7) Maximum hinge pin height 3496 mm 11'4" 3496 mm 11'4" 8) Dump angle at full height 4 4 Dump height at maximum angle 2666 mm 8'9" 2699 mm 8'8" 9) Dump reach at maximum angle 790 mm 2'7" 869 mm 2'8" 10) Maximum bucket rollback at ground level 40 40 11) Digging depth 17 mm " 17 mm " Maximum grading angle 108 107 Width of dozer cutting edge 2434 mm 7'9" 12) Maximum operating height 428 mm 14'8" 420 mm 14'8" Jaw opening maximum 913 mm 3'0" Weight (does not include teeth or forks) 462 kg 1018 lb 809 kg 1783 lb BACKHOE DIMENSIONS Extendible Stick Extendible Stick AND PERFORMANCE Standard Stick Retracted Extended 13) Digging depth, manufacturers maximum 264 mm 17'2" 370 mm 17'6" 646 mm 21'2" 14) Digging depth, 610 mm (2'0") flat bottom 222 mm 17'1" 331 mm 17'4" 644 mm 21'1" 1) Reach from swing pivot at ground line 6063 mm 19'8" 6169 mm 20'2" 7263 mm 23'8" Loading height 4012 mm 13'1" 3968 mm 13'0" 477 mm 1'0" 16) Loading reach 1888 mm 6'1" 2062 mm 6'7" 3030 mm 9'9" Swing arc 180 180 180 Bucket rotation 20 20 20 17) Stabilizer width 2368 mm 7'7" 2368 mm 7'7" 2368 mm 7'7" Bucket dig force 71 kn 1,961 lb 70 kn 1,736 lb 70 kn 1,736 lb Stick dig force 44 kn 9891 lb 43 kn 9666 lb 32 kn 7193 lb Total side shift travel 128 mm 4'1" 128 mm 4'1" 128 mm 4'1" Edition 40-3
40E IT Loader Dimensions and performance specifications shown are for machines equipped with 1-19. (12 PR) front tires, 21L-24 (18 PR) rear tires, ROPS canopy, standard stick with 610 mm (24 in) heavy-duty bucket, and 1.34 m 3 (1.7 yd 3 ) loader bucket and standard equipment unless otherwise specified. MACHINE DIMENSIONS General Purpose Multi Purpose 1.3 m 3 (1.7 yd 3 ) 1.2 m 3 (1.63 yd 3 ) 1) Overall length, loader on ground, standard stick 7913 mm 26'0" 7786 mm 2'7" Overall length, loader on ground, extendible stick 7913 mm 26'0" 7786 mm 2'7" Overall transport length, standard stick 7916 mm 26'0" 7826 mm 2'8" Overall transport length, extendible stick 7916 mm 26'0" 7826 mm 2'8" 2) Overall transport height, standard stick 4143 mm 13'7" 4143 mm 13'7" Overall transport height, extendible stick 419 mm 13'8" 419 mm 13'8" Overall width 2436 mm 8'0" 2436 mm 8'0" 3) Height to top of cab/canopy 2874 mm 9'" 2874 mm 9'" 4) Height to top of exhaust stack 284 mm 9'4" 284 mm 9'4" Rear axle centerline to front grill 2832 mm 9'4" 2832 mm 9'4" Height to loader hinge pin (transport) 469 mm 1'6" 481 mm 1'7" Ground clearance (minimum) 322 mm 1'1" 322 mm 1'1" ) Rear axle to loader bucket on ground 4494 mm 14'9" 4367 mm 14'4" Front wheel tread gauge 2016 mm 6'7" 2016 mm 6'7" Rear wheel tread gauge 1814 mm '11" 1814 mm '11" 6) Wheelbase 2200 mm 7'3" 2200 mm 7'3" -36 Edition 40
40E Multi Purpose LOADER BUCKET DIMENSIONS General Purpose Multi Purpose with Forks AND PERFORMANCE 1.3 m 3 (1.7 yd 3 ) 1.1 m 3 (1. yd 3 ) 1.1 m 3 (1. yd 3 ) Capacity (SAE) rated 1.3 m 3 1.7 yd 3 1.1 m 3 1. yd 3 1.1 m 3 1. yd 3 Width 2434 mm 8'0" 242 mm 7'11" 242 mm 7'11" Lift capacity at maximum height 3828 kg 8439 lb 374 kg 8276 lb 3661 kg 8071 lb Breakout force 2 249 N 11,746 lb 60 067 N 13,03 lb 9 78 N 13,434 lb Tipping load at breakout point 8376 kg 18,466 lb 878 kg 19,368 lb 868 kg 19,147 lb 7) Maximum hinge pin height 3486 mm 11'" 3486 mm 11'" 3486 mm 11'" 8) Dump angle at full height 44 44 44 Dump height at maximum angle 2647 mm 8'8" 2741 mm 9'0" 2741 mm 9'0" 9) Dump reach at maximum angle 88 mm 2'10" 787 mm 2'7" 787 mm 2'7" 10) Maximum bucket rollback at ground level 40 40 40 11) Digging depth 229 mm 9" 19 mm 8" 19 mm 8" Maximum grading angle 106 109 109 Width of dozer cutting edge N/A 2406 mm 7'11" 2406 mm 7'11" 12) Grill to bucket cutting edge, carry position 1666 mm '6" 176 mm '2" 176 mm '2" 13) Maximum operating height 412 mm 14'10" 448 mm 14'11" 448 mm 14'11" Jaw opening maximum N/A 864 mm 2'10" 864 mm 2'10" Bucket jaw clamping force N/A 39 800 N 8947 lb 39 800 N 8947 lb Weight 692 kg 126 lb 909 kg 2004 lb 1062 kg 2341 lb BACKHOE DIMENSIONS Extendible Stick Extendible Stick AND PERFORMANCE Standard Stick Retracted Extended 14) Digging depth, SAE (maximum) 27 mm 17'3" 29 mm 17'3" 600 mm 21'4" Digging depth, 2438 mm (8'0") flat bottom 4923 mm 16'2" 4924 mm 16'2" 6229 mm 20'" 1) Digging depth, 610 mm (2'0") flat bottom 221 mm 17'2" 221 mm 17'2" 646 mm 21'3" Reach from rear axle centerline at ground line 792 mm 26'1" 792 mm 26'1" 913 mm 30'0" 16) Reach from swing pivot at ground line 6701 mm 22'0" 6702 mm 22'0" 7884 mm 2'10" Overall operating height 626 mm 21'" 624 mm 21'" 7368 mm 24'2" Loading height 4447 mm 14'7" 4447 mm 14'7" 206 mm 17'1" 17) Loading reach 2091 mm 6'10" 2090 mm 6'10" 3098 mm 10'2" Swing arc 17 17 17 Bucket rotation 198 198 198 18) Stabilizer spread, operating position (center of pad) 3614 mm 11'10" 3614 mm 11'10" 3614 mm 11'10" 19) Stabilizer spread operating position (outside edge of pad) 40 mm 13'4" 40 mm 13'4" 40 mm 13'4" Stabilizer spread, transport position 241 mm 8'0" 241 mm 8'0" 241 mm 8'0" Bucket dig force 79 004 N 17,760 lb 79 004 N 17,760 lb 79 004 N 17,760 lb Stick dig force 2 00 N 11,802 lb 3 203 N 11,960 lb 40 000 N 8992 lb Leveling angle (maximum slope on which machine will make a vertical cut) 13 13 13 Edition 40-37
Lift Capacities 40E KEY A Boom lift kg lb B Stick lift kg lb Standard Stick Lift capacities are over-end values per SAE J31; machine equipped with 4WD, OROPS, 1.34 m 3 (1.7 yd 3 ) generalpurpose loader bucket, 610 mm (24 in) heavy duty backhoe bucket and 44 kg (1000 lb) counterweight. Extendible stick lift capacities include 682 kg (100 lb) counterweight. *Indicates lift capacity is stability limited. -38 Edition 40 Extendible Stick Retracted Extendible Stick Extended