924Gz Wheel Loader Cat 3056E DIT ATAAC Engine Rated Net Power at 2300 rpm 97 kw/130 hp Maximum Net Power at 1900 rpm 103 kw/138 hp Bucket capacities 1.7 2.1 m 3 Machine weight 10 850 kg
924Gz Wheel Loader Offering world class performance, value and reliability. Caterpillar Power Train The 924Gz uses a Caterpillar power train for reliable, long life. The Caterpillar 3056E DIT ATAAC sixcylinder engine and Cat power shift transmission are performance-matched to the torque converter and axles for smoother performance and greater operator comfort. pg. 4 Operator Station The 924Gz operator station is ergonomically designed to create a comfortable work area. Easy-to-use machine controls and a new gauge console reduce operator fatigue and increase efficiency and productivity. pg. 6 Hydraulic System Modular hydraulic system offers fast loading cycles, easy reconfiguration and exceptional ride control. pg. 8 Owning and Operating Costs Extended service intervals, an advanced electronic warning system, lower fuel consumption and faster cycle times save you time and money. pg. 10 Environmentally Responsible Design Quiet operation, low engine emissions, less fluid disposal and clean service help you meet worldwide regulations and protect the environment. pg. 12 The 924Gz is designed and built for maximum loader performance. The powerful Caterpillar power train, load-sensing hydraulic system and Z-bar linkage all combine to give more than ever before from a machine this size. New feature 2
Caterpillar Buckets Caterpillar Buckets feature rugged construction, intergral spill plates and replaceable heel wear plates. pg. 9 Serviceability Perform daily maintenance with easy ground-level access to all major service points. Gull-wing doors provide excellent engine access and a swing-out fan simplifies radiator service. pg. 11 Complete Customer Support Caterpillar dealers offer unmatched customer support, with excellent warranty programs and fast parts availability, resulting in maximum uptime and minimum repair costs. pg. 12 3
Caterpillar Power Train Rugged, dependable Cat components deliver maximum rimpull to the ground and full power to the loader hydraulics. Caterpillar Engine. The six-cylinder, 3056E direct injection, turbocharged (DIT) engine with air-to-air after cooler (ATAAC) has a proven reputation for reliability, durability and performance. Fuel injection is electronically controlled for precise timing. Torque Rise. The engine features a 48% torque rise for increased power during heavy-duty use. Emission Standards. The 3056E DIT ATAAC engine meets worldwide emissions standards. Cylinders. Low cylinder pressure rise and low peak pressure provide outstanding reliability and durability. Cooling System. Engine and cooling system are in separate compartments for clean, quiet operation and easy service. Air-to-Air After Cooling. Air-to-air after cooling reduces engine emissions. Electronic Control Module. The Caterpillar engine control module not only controls the timing needs of the engine but also monitors critical systems to maintain optimum performance and provide engine protection. Service Intervals. The normal engine oil change requirement is every 500 hours of operation. Axles. Heavy-duty design features strong gears and bearings for durable performance. Oscillating rear axle helps assure four-wheel ground contact for optimum traction and stability. Brakes. Oil-disc brakes are adjustment free and fully enclosed. Optional Heavy-Duty Brakes. Optional heavy-duty brakes provide additional brake discs and oil cooler for severe applications. 4
Limited Slip Differentials. Optional front and rear Limited Slip differentials provide improved traction in poor or uneven underfoot conditions. Duo-Cone Seals. Duo-Cone Seals keep oil in and contaminants out. Transmission. Rugged, field-proven Caterpillar 4F/3R transmission uses heavy-duty components for durable and reliable operation. High-energy friction materials allow for better heat tolerance while thick reaction plates allow for better heat dissipation. The transmission is also designed for easy service and rebuild. Electronic Clutch Pressure Control. Electronic Clutch Pressure Control (ECPC) manages shift torque providing exceptional smoothness. Gears. High-contact ratio spur gears are precision ground and heat treated for quiet, durable operation. Shifting Options. Operator can choose manual shift or two autoshift modes (full throttle or variable shift control). Full throttle selection provides maximum acceleration while variable selection increases fuel economy and improves operator comfort. 5
Operator Station Ergonomic design emphasizes comfort, visibility and easy operation. Cab. The ergonomic cab provides a comfortable work environment with large windows, spacious interior room, generous storage areas and low interior sound levels. Access/Egress. Access/egress is through a two-door design. Both doors open fully and lock flush against the cab. Steps leading up to the cab are wide and angled out for secure footing. Windows. Large windows improve visibility in all directions. The rear window features a standard electric defroster. Sliding glass is available as an option on the doors. Visibility. Visibility to critical areas such as the bucket have been optimized. Lift arm spacing is wide and linkage geometry maximizes visibility throughout the production cycle. Instrument Panel. Redesigned instrument panel is conveniently located with easy-to-read gauges and expanded warning/indicator and diagnostic functions. Electronic Engine Speed Control. A specific engine rpm can be set and maintained with a switch in the cab. Steering System. The load-sensing, closed-center steering system with flow amplification matches steering response to a wide variety of applications. The adjustable steering console tilts easily out of the way. Dual suspended brake pedals function as a brake and a transmission neutralizer so the operator can maintain high engine rpm for full hydraulic flow and fast cycle times. 6
Low Effort Operation. Joystick hydraulic controls provide ease of lift and tilt functions. A single joystick is standard. An integrated directional control switch on the joystick provides easy operation and enhanced productivity. A two lever control is optional. Seat. The standard seat is available in cloth or vinyl with fully adjustable fore/aft position, seatback angle, bottom cushion height, armrest angle and suspension stiffness. Other seat options include: Cat Contour Seat which adds adjustable backrest and adjustable lumbar support. Cat Contour Series Seat with added air suspension, electrically adjustable. KAB fabric seat heated with an alarm feature for operator Seat Belt. All seats include a comfortable 51 mm or 75 mm wide retractable seat belt. Storage. Generous storage space includes a lockable compartment, coat hook and special molded compartments designed to hold a lunchbox/cooler, cup or can. A tool box is also provided. Customize the Cab. The cab can be customized with: 12V converter for powering electronics such as cellular phones, two-way radios and music systems Radio installation package Sun visor for windshield Roll-down sun screen for rear window External mirror packages Auxiliary lighting packages 7
Hydraulic System Modular system provides improved efficiency and greater control. Precise Control. Designed by Caterpillar, the modular hydraulic system provides low effort operation and superior control. Performance. Fast loader cycle times result in greater productivity. The hydraulic system is matched to the power train for outstanding performance. Joystick Control. Low effort, joystick implement control improves efficiency with simultaneous lift and tilt functions. Load-Sensing Steering. Load-sensing steering provides low effort operator control, making more power available for rimpull, breakout and lift forces. Load-Sensing Implement Hydraulics. Load-sensing implement hydraulics provide exceptional second gear hydraulic-to-rimpull match for better material handling. Pumps. Separate steering and implement pumps improve machine response. Tilt Cylinder. A large tilt cylinder delivers exceptional backdrag performance. Hoses. Caterpillar XT hoses and couplings provide rugged, reliable performance with significantly reduced risk of leaks and blown lines. Modular Hydraulic Control Valves. Modular hydraulic control valves add a new dimension of versatility that greatly simplifies and lowers overall cost of reconfiguring the machine for additional functions. Two-Section Control Valve. The 924Gz comes equipped with a two-section control valve for lift and tilt functions. One additional valve section can be stacked onto the exisiting ones. Ground Level Access. The control valves feature convenient ground level access for easy modifications to the system. Pressure Taps. Standard pressure taps allow quick diagnosis of the entire hydraulic system. Diagnostics and Monitoring. The 924Gz is equipped with Scheduled Oil Sampling (S O S SM ) ports for the hydraulic, transmission and engine oils. Optional Ride Control System. The improved Ride Control system provides a comfortable ride at all speeds and improved hard bank digging. Three modes are available: auto, on and off. 8
Caterpillar Buckets Caterpillar buckets are an integral part of a machine designed to optimize performance. Choice of Buckets. Caterpillar offers a wide range of buckets. Careful match of the bucket design and machine operating characteristics provide the best digging, loading and carrying performance. General Purpose Buckets. Caterpillar general purpose buckets, available in 1.7 m 3 to 2.1 m 3 capacities (with bolt-on cutting edge), are suitable for most general applications. Features include: Improved bucket design with longer floor and a larger radius for easier flow of material into the bucket Patented Two-Bolt Corner Guard Cutting Edge System for superior wear resistance, better stability and a simple bolt-on system Built-in, replaceable heel wear plates for extended bucket life. Penetration Bucket. The Caterpillar penetration bucket has a 1.7 m 3 capacity. It provides best results in materials that require moderate impact and breakout forces. Features include: Sharpened cutting edges and curved side bars for maximum penetration. Flush-mount weld-on teeth. Flat floor for easier loading. Full-width edge for backdragging. Fore/aft wear strips extend bucket life. Ground Engaging Tools. Ground engaging tools include hardened steel cutting edges, choice of short or long teeth and a variety of tooth adapters. These tools optimize performance, improve load retention and extend the useful life of Caterpillar buckets. Versatility. For expanded machine versatility, other special purpose buckets are also available. Contact your Caterpillar dealer for details. 9
Owning and Operating Costs Cost saving features help improve your bottom line. Low Fuel Consumption. The 3056E DIT ATAAC engine features low fuel consumption for more economical operation. Increased Power, Faster Cycle Times. Higher horsepower and increased torque rise results in more power and faster cycle times, allowing the operator to get more work done in a day. Extended Service Intervals. Service intervals have been extended to reduce machine service time and increase machine availability: 4000 hour hydraulic oil change 1000 hour hydraulic filter change 500 hour engine oil change Smoother Transmission for Increased Productivity. A smoother shifting transmission provides a more comfortable work environment, allowing the operator to be more productive throughout the entire work shift. Demand Fan. Demand fan changes speed to meet load requirements and save fuel. Engine Derate Feature. Auto Derate monitors vital engine systems and will, if necessary, derate the engine horsepower up to 50% to protect the engine. Product Link Option. Caterpillar s asset management or equipment management system called Product Link, enables dealers and their customers to track equipment for hours and location, and in some cases monitor machine health. This easy to use system provides information flow between a machine and the user through the internet based Dealer Storefront. This information helps lower operating costs through timely service/repairs and optimized machine use. Machine Security System Option. The Machine Security System (MSS) inhibits unauthorized machine use by immobilizing vital electrical circuits. Critical machine circuits are inhibited unless a valid key is used to start the machine. 10
Serviceability Improved access and fewer maintenance requirements add up to unparalleled ease of service. Easy Access. Gull-wing engine enclosure doors with gas struts lift for exceptional access to filters and service points. Radiator and oil coolers are easily accessible for cleaning. Simplified Routine Service. All service points are accessible from the ground level. It is easy to check radiator coolant, hydraulic oil and transmission oil levels with sight gauges. Swing-out Cooling Fan. A swing-out cooling fan allows quick, easy cleaning and service of the radiator. The fan is hydraulically driven and separate from the engine compartment for exceptional low noise operation. Optional Reversing Fan. Optional reversing capability of the fan cleans screens without interrupting machine operation. S O S Ports. Scheduled Oil Sampling (S O S) ports are factory installed for improved access to engine, transmission and hydraulic oils. S O S ports make oil sampling quicker, cleaner and provide the best oil sample for analysis. Oil Filters. Spin-on filters for engine oil, transmission oil and hydraulic oil are vertically mounted for easier servicing. Self-Diagnostics. Built in self diagnostics allow quick and easy troubleshooting by service personnel. Service codes are easily accessed through the gauge console. Extended Life Coolant/Antifreeze. Cat Extended Life Coolant/Antifreeze allows extended operation (up to 6000 hours) between changes. Other Service Features. Other service features include: Maintenance-free driveshaft Stationary radiator and coolant hoses Standard hydraulic oil cooler Adjustment-free brakes Adjustment-free engine fuel system Grouped grease fittings Positive torque hose clamps Braided, color coded wiring 11
Environmentally Responsible Design Caterpillar machines not only help you build a better world, they help maintain and preserve the fragile environment. Low Fuel Consumption. The 924Gz is the top performer in its size class. The result is more work done in a day, less fuel consumed and minimal impact on the environment. Low Exhaust Emissions. The Cat 3056E DIT ATAAC is a low emission engine designed to meet current worldwide emission regulations and is Stage II compliant. Quiet Operation. The engine cooling system allows the engine to be fully enclosed, allowing less engine noise to escape. With the optional sound suppression package, the 924Gz is even quieter. Ozone Protection. To help protect the earth s ozone layer, the air conditioning unit uses only R-134a refrigerant which does not contain harmful chlorofluorocarbons (CFC s). Fewer Leaks and Spills. Engine oil, transmission and hydraulic filters are positioned vertically and are easily removed without spillage. Cat O-ring face seals, XT hose and hydraulic cylinders are all designed to help prevent fluid leaks that can weaken the machine s performance and cause harm to the environment. Rebuildable Components. All major components are designed for rebuildability. Biodegradable Hydraulic Oil. Caterpillar biodegradable hydraulic oil can be used in the 924Gz, providing an environmentally-sound alternative to mineral-based oils. Complete Customer Support Caterpillar dealer services ensure a longer machine operating life with lower costs. Selection. Make detailed comparisons of machines before purchasing. What are the job requirements? What production is needed? What is the true cost of lost production? Your Cat dealer can give you precise answers to these questions. Purchase. Look at the value the 924Gz offers. Consider the financing options your Cat dealer offers as well as daytoday operating costs. Dealer support services can be included in the cost of the machine to yield lower equipment owning and operating costs over the life of the machine. Operation. For the best operating techniques to increase productivity and your profit, turn to your Cat dealer for the latest training literature and knowledgeable staff. Maintenance. Choose from a wide range of maintenance services at the time of machine purchase. Repair option programs guarantee the cost of repairs up front. Diagnostic programs such as S O S Oil Analysis and Technical Analysis help avoid unscheduled repairs that can cost unnecessary time and money. Replacement. Repair, rebuild or replace? Your Cat dealer can help you evaluate the cost involved to make the right choice. Product Support. You will find nearly all parts at our dealer parts counter. Cat dealers utilize a worldwide computer network to find in-stock parts to minimize machine downtime. Additionally, Caterpillar offers a line of genuine remanufactured components which can help lower repair costs. 12
Engine Caterpillar four-stroke cycle, six cylinder 3056E DIT ATAAC diesel engine. Rated Net Power 2300 rpm ISO 9249 97 kw/130 hp EEC 80/1269 97 kw/130 hp Maximum Net Power 1900 rpm ISO 9249 103 kw/138 hp EEC 80/1269 103 kw/138 hp Bore 100 mm Stroke 127 mm Displacement 6 liters Net Power ratings are tested at the reference conditions for the specified standard. Net power advertised is the power available at the flywheel when the engine is equipped with alternator, air cleaner, muffler and fan at minimum speed. No derating required up to 3000 m altitude. Auto Derate protects hydraulic and transmission systems. When the fan is at maximum speed rated net power is 86 kw (115 hp) and Maximum Net Power is 96 kw (129 hp) at the flywheel per the SAE reference conditions. The Caterpillar 3056E DIT ATAAC engine meets Stage II off highway emission regulations. Features Electronically controlled rotary fuel pump Three-ring, controlled-expansion, lubricated pistons Gear-driven water and oil pumps One-piece cast iron cylinder heads with two valves per cylinder Fuel priming pump and fuel/water separator S O S sampling port for engine oil Replaceable dry liners Cast aluminum valve cover Radiator can be easily accessed for cleaning Transmission Standard Transmission and Optional Low Speed Transmission. Maximum travel speeds 550/65 R25 tires) Standard Low Speed Forward km/h km/h 1 7 4 2 12 8 3 22 20 4 39 39 Reverse 1 7 4 2 12 8 3 22 21 Electronically-controlled Caterpillar countershaft transmission with full on-the-go directional and speed change capability. High-energy friction materials and thick reaction plates for better tolerance of heat. High-contact ratio spur gears are precision ground and heat treated for quiet, reliable operation. Electronic autoshift is standard. Button on implement control lever allows downshifting on demand. Computer controlled modulation provides smoother transitions. Optional low speed transmission available for better match with attachments requiring high hydraulic flow. Loader Hydraulic System Output at 2300 engine rpm and 6900 kpa with SAE 10W oil at 65 C 152 L/min Maximum working pressure 25 900 kpa Hydraulic cycle time Raise 5.2 Seconds Dump 1.1 Seconds Lower, empty, float down 2.7 Seconds Total 9 Seconds Lift cylinders, double acting Bore 107.95 mm Stroke 755 mm Tilt cylinders, double acting Bore 120.6 mm Stroke 520 mm Load-sensing system provides only the flow and pressure needed to move the load. Variable-displacement axial piston implement pump. Low effort, hydraulic joystick controls. Electronic pilot shut-off switch disables implement functions for added safety. Hydraulic couplings with O-ring face seals. Space around radiator for easy cleaning. Improved Ride Control system available to provide improved ride with less spillage from bucket during load & carry operations and better hard bank capability. Engine Torque Net Engine Power Net Tires Engine Torque Nm 600 500 400 300 200 100 kw 120 100 80 60 40 20 Engine Power 17.5-25 17.5 R25 550/65 R25 20.5-25 20.5 R25 Other tire choices are available, contact your Cat Dealer for details. In certain applications, the loader s productive capabilities may exceed the tire s tonnes-km/h capabilities. Caterpillar recommends that you consult a tire supplier to evaluate all conditions before selecting a tire model. 1000 1200 1400 1600 1800 2000 2200 rpm Engine Speed 924Gz Wheel Loader specifications 13
Steering Axles Weights Minimum turning radius (over tire) 5070 mm Steering angle, each direction 40º Steering cylinders, two, bore 70 mm Hydraulic output at 2300 engine rpm and 6900 kpa 106 L/min Maximum working pressure 20 685 kpa Center-point frame articulation. Front and rear wheels track. Variable displacement piston pump provides steering power at all engine and ground speeds. Tilt steering console. High-impact rubber steering stops. Secondary steering system available to meet roading regulations in various countries and ISO 5010. Fixed front, oscillating rear (±12 with 17.5-25 L-2 tires). Caterpillar axle with fully-enclosed brakes and final drives. Patented Duo-Cone Seals between axle and housing. Rear wheel can raise or drop a total of: 423 mm with 17.5 tires, or 326 mm with 20.5 tires Limited Slip differentials are optional on front, rear or both axles. Rear axle trunnion has remote lubrication fitting. Planetary final drives are lubricated from the main oil sump. High contact gearset reduces noise levels during meshing. Operating Weight 10 850 kg Specifications are for 924Gz with optional counterweight, standard lubricants, full fuel tank, cab with A/C, sliding glass, Cat contour seat, limited slip axles with dual disc rear, 4L 4V hydraulics, heavy duty cooler, supplemental steering, roading fenders, reversing fan, back-up alarm, guards, ride control, radio, 1.8 m 3 bucket with bolt-on cutting edge, 80 kg operator and 20.5 R25 radial (L-3) XHA tires. Service Refill Capacities Liters Fuel tank 225 Cooling system 40 Crankcase 20 Transmission 23 Front axle 21 Rear axle 21 Hydraulic system (including tank) 125 Hydraulic tank 70 Bucket Controls Brakes ROPS/FOPS Lift circuit Four positions: raise, hold, lower and float. Adjustable automatic kickout from horizontal to full tilt. Tilt circuit Three positions: tilt back, hold and dump. Adjustable automatic bucket positioner to desired loading angle. Does not require visual spotting. Controls Choice of two low effort control systems: a joystick or a two-lever control of lift and tilt circuits. Optional third and fourth function hydraulic circuits available with individual lever controls for remote hydraulic functions. Controls can be disabled for roading. 14 924Gz Wheel Loader specifications Service brake Inboard oil-immersed disc brakes on front and rear axles are standard. Completely enclosed and sealed. Adjustment-free. Separate circuits for front and rear. Dual pedal braking system. Fully integrated with hydraulic system, no air system required. Secondary brake Indicator light alerts operator if brake pressure drops. Continually-charged nitrogen accumulators provide stopping power after loss of engine power. Parking brake Mechanical, shoe-type brake. Mounted on drive line for positive manual operation. Application of parking brake neutralizes the transmission. Heavy-duty brake Optional heavy-duty brakes with integrated oil cooler. Caterpillar cab with integrated Rollover Protective Structure (ROPS/FOPS) are standard. ROPS meets ISO 3471:1994. FOPS meets ISO 3449:1992 Level II. Sound Operator Sound The operator sound level measured according to the procedures specified in ISO 6394:1992 is 74 db(a), for cab offered by Caterpillar, with doors and windows closed. Exterior Sound As manufactured by Caterpillar, this machine's exterior sound power level meets the criteria spelled out in the European Directives noted on the certificate of conformance and the accompanying labeling. standard version 107 db(a) low sound or Blue Angel version 101 db(a)
Supplemental Specifications Air conditioner Canopy, ROPS (less cab) Counterweight, 175 kg (removal) Guard, crankcase Guard, driveshaft Guard, power train Ride Control System Secondary steering (removal) Fenders, roading Low sound package Lighting AR, roading Tires, 1 piece rims 17.5-25, 12PR (L-2) 17.5-25, 12PR (L-3) 17.5-R25, radial (L-2) 17.5 R25, radial (L-3) Tires, 3 piece rims 17.5-25, 12PR (L-2) 17.5-25, 12PR (L-3) 17.5-25, radial (L-2) 17.5 R25, radial (L-3) 550/65 R25, radial (L-2) 550/65 R25, radial (L-3) 20.5-25, 12PR (L-2) 20.5-25, 12PR (L-3) 20.5-25, radial (L-2) 20.5-25, radial (L-3) Bucket Size Selector Material Density Bucket 1.7 m 3 1.8 m 3 2.0 m 3 2.1 m 3 Change in Operating Weight kg 1400 1600 1800 2000 kg/m 3 Change in Articulated Static Tipping Load kg -32-29 -199-182 -175-300 -15-21 -43-5 -52-51 -40-29 -37-33 -39-50 104 116 12 11-652 -408-580 -363-612 -383-512 -320-528 -330-456 -285-488 -305-388 -243-196 -123-136 -85-240 -150-36 -22-172 -108 0 0 Typical Material Densities Loose kg/m 3 Basalt 1960 Bauxite, Kaolin 1420 Clay natural bed 1660 dry 1480 wet 1660 Clay and gravel dry 1420 wet 1540 Decomposed rock 75% rock, 25% earth 1960 50% rock, 50% earth 1720 25% rock, 75% earth 1570 Earth dry, packed 1510 wet, excavated 1600 Granite broken 1660 Gravel pitrun 1930 dry 1510 dry, 6-50 mm 1690 wet, 6-50 mm 2020 Gypsum broken 1810 crushed 1600 Limestone broken 1540 crushed 1540 Sand dry, loose 1420 damp 1690 wet 1840 Sand and clay loose 1600 Sand and gravel dry 1720 wet 2020 Sandstone 1510 Shale 1250 Slag broken 1750 Stone crushed 1600 % Bucket Fill Factor 115% 100% 95% 924Gz Wheel Loader specifications 15
Dimensions with Bucket All dimensions are approximate. Dimensions may vary with bucket. 15 1 2 3 16 17 18 10 11 12 13 14 4 5 19 7 8 20 9 6 1 Height to top of ROPS/FOPS 3228 mm 2 Height to top of exhaust stack 3211 mm 3 Height to top of hood 2219 mm 4 Height to centre of axle 692 mm 5 Ground clearance 438 mm 6 Overall length 7030 mm 7 Length - rear axle to bumper 1918 mm 8 Centre line of front axle to hitch 1400 mm 9 Wheel base length 2800 mm 10 Dump clearance at maximum lift and 45 dump 2828 mm 11 Bucket clearance at maximum lift and carry 3434 mm 12 Bucket pin height at maximum lift 3759 mm 13 Overall height - bucket raised 4811 mm 14 Reach at maximum lift and 45 dump 790 mm 15 Rack back angle at maximum lift and level 58 16 Dump angle at maximum lift 45 17 Rack back angle at ground 44 18 Rack back angle at carry 48 19 Carry height 435 mm 20 Digging depth 42 mm 17.5-25 Tires 20.5-25 Tires 21 Width over tread center 1880 mm 1880 mm 22 Overall width over tires 2356 mm 2466 mm 23 Minimum turning radius over tires 5070 mm 5135 mm 24 Loader clearance radius with bucket in carry position See Operation Specifications on pg 20+21 25 Steering angle - left/right 40 40 Change in vertical dimension -68 mm 0 Dimensions listed are for 924Gz with optional counterweight, standard lubricants, full fuel tank, cab with A/C, sliding glass, Cat contour seat, limited slip axles with dual disc rear, 4L 4V hydraulics, heavy duty cooler, supplemental steering, roading fenders, reversing fan, back-up alarm, guards, ride control, radio, 1.8 m 3 bucket with bolt-on cutting edge, 80 kg operator and 20.5 R25 radial (L-3) XHA tires. Refer to Operating Specifications for bucket variations. 16 924Gz Wheel Loader specifications
Z-Bar Linkage and Bucket All dimensions are approximate. Dimensions vary with bucket. Pin-on Buckets General Purpose Buckets Penetration Bolt-On Cutting Edge Bolt-On Teeth and Segments* Bolt-On Teeth* Flush Mounted Teeth* Rated bucket capacity m 3 1.8 2.1 1.8 2.1 1.7 2.0 1.7 Struck capacity m 3 1.5 1.7 1.5 1.7 1.4 1.6 1.4 Bucket width Dump clearance at full lift and 45 discharge Reach at full lift and 45 discharge Reach at 45 discharge and 2130 mm clearance Reach with lift arms horizontal and bucket level Digging depth mm mm mm mm mm mm 2550 2550 2585 2585 2585 2585 2594 2828 2759 2724 2655 2724 2655 2744 790 859 894 962 894 962 1110 1318 1347 1360 1385 1360 1385 1586 2058 2155 2204 2301 2204 2301 2439 42 50 42 50 17 25 37 Overall length Overall height with bucket at full raise Loader clearance radius with bucket in carry position Static tipping load, straight Static tipping load, full 40 turn Breakout force mm mm mm kg kg kn 6890 6993 7036 7138 7017 7120 7287 4811 4938 4811 4938 4811 4938 5178 5609 5638 5670 5700 5670 5700 5653 8702 8619 8534 8448 8696 8626 8355 7642 7562 7473 7391 7628 7568 7295 97 87 96 86 105 94 104 Operating weight kg 10 846 10 899 10 981 10 944 10 896 10 949 11 326 Specifications shown are for 924Gz with optional counterweight, standard lubricants, full fuel tank, cab with A/C, sliding glass, Cat contour seat, limited slip axles with dual disc rear, 4L 4V hydraulics, heavy duty cooler, supplemental steering, roading fenders, reversing fan, back-up alarm, guards, ride control, radio, 1.8 m 3 bucket with bolt-on cutting edge, 80 kg operator and 20.5 R25 radial (L-3) XHA tires. * Dimensions are measured to the tip of the bucket teeth to provide accurate clearance data. SAE standards specifies the cutting edge. 924Gz Wheel Loader specifications 17
Standard Equipment Standard equipment may vary. Consult your Caterpillar dealer for specifics. Electrical Alternator, 80-amp Alarm, back-up Batteries, maintenance-free, 950 CCA (2) Directional signals, (front and rear) Electrical system, 24V Halogen working lights (front and rear) Ignition key start/stop switch Roading lights Starting aid, thermal Operator environment Cab, ROPS (sound suppressed and pressurized) Gauges: Engine coolant temperature Hydraulic oil temperature Torque converter oil temperature Fuel level gauge Speedometer Digital tachometer Digital hour meter/odometer Warning indicators: Primary steering malfunction Electrical system voltage low Coolant temperature Engine oil pressure low Parking brake applied Brake charge pressure low Transmission oil temperature Transmission oil filter bypass Hydraulic oil filter bypass Adjustable tilt steering column Coat Hook Ground level door release Heater/defroster Horn, steering wheel mounted (electric) Interior light Interior and exterior auxiliary power sockets Lighter Lunch box storage with cup holder Pilot hydraulic implement controls Rear window defroster, electric Rear view mirrors (2 inside) Seat, adjustable suspension, backrest, armrest (fabric or vinyl) Seatbelt, 51 mm or 75 mm, retractable Tinted safety glass Two door cab, fixed glass Wet arm wiper/washer, intermittent, front and rear Power Train Engine, Caterpillar 3056E DIT ATAAC Low emission diesel engine Turbocharged Aftercooled Electronically controlled Air cleaner, dry type Axle seal guards Brakes, enclosed wet-disc full hydraulic Differentials, conventional (front/rear) Driveshaft, lubed for life Engine fuel priming pump Engine speed control Fuel/water separator Muffler Radiator, unit serviceable S O S oil sampling port: engine oil transmission oil Torque converter Transmission, 4F/3R, autoshift, single lever control and kickdown button Transmission neutralizer Hydraulics Hydraulic control, 2-valve, 1-lever, with F/N/R Hydraulic control lever lockout Hydraulic diagnostic connectors Hydraulic oil cooler Load-sensing steering system S O S oil sampling port, hydraulic oil Other standard equipment Antenna, for radio Antifreeze/coolant, extended-life protects to -36 C Brakes, secondary and parking Bucket positioner, automatic Counterweight Engine enclosure, lockable Fenders, front Hitch, recovery Implement control lever locks Loader linkage, Z-bar with sealed pins Lift kickout, automatic Machine Security System ready Product Link ready Remote grease lines Steering stops, cushioned Swing-out, hydraulically driven demand fan Vandalism protection, lockable service points Visual indicators: air cleaner service coolant level hydraulic oil transmission oil 18 924Gz Wheel Loader specifications
Optional Equipment Optional equipment may vary. Consult your Caterpillar dealer for specifics. Electrical Alternator, 95-amp Electrical accessories package (12V converter, accessory plug outlet, wiring) Working lights, auxiliary, cab-mounted Operator environment Air conditioner (R-134a refrigerant) Canopy, ROPS Mirrors, external (2 sizes) Radio prep packages: 12V installation, includes speakers, cable, mounting bracket, hardware, converter and accessory plug. Radio not included. 24V installation, same as above, but without converter or accessory plug. Seats: Caterpillar Contour Series, fabric Caterpillar Contour Series, fabric, with air suspension KAB fabric seat heated with an alarm feature for operator presence Sliding door windows (left and right) Sun screen, rear Visor, sun (front) Power Train Differential, limited slip, front axle and/or rear axle Brakes, heavy duty Fan, reversing Low speed transmission Radiator, wide fin spacing Ride control system Starting aid, engine coolant heater, 120V or 240V Hydraulics Hydraulic control, two lever (lift/tilt) Hydraulic control, 3rd valve Hydraulic oil cooler, heavy-duty Other optional equipment Antifreeze/coolant, extended-life, protects to -50 C Beacon light, rotating, magnetic-mount Buckets/ground engaging tools Counterweight Dust bowl precleaner Fenders, roading, rear Guards: Crankcase Power train Waste guarding package Machine Security System Product Link Sound suppression package Steering, secondary Tires: Bias ply, 17.5-25 and 20.5-25 Radial, 17.5-25, 550/65 R25 and 20.5-25 Quick coupler 924Gz Wheel Loader specifications 19
924Gz Wheel Loader HEHL2834-2 (09/2004) hr Featured photos of machines may not always include standard equipment. See your Caterpillar Dealer for available options. Materials and specifications are subject to change without notice. www.cat.com 2004 Caterpillar All Rights Reserved 20