102926-ELE-PT-E-2005 Electrical Testing & Protection Engineer Holds B. Sc. and M. Sc. in Electrical Power & Machines Engineering and has about 9 years hands-on experience in protection, testing and commissioning. PERSONAL DATA Nationality : Egyptian Birth Date : 20/09/1983 Gender : Male Marital Status : Married Residence : Talkha EDUCATION : B. Sc. in Electrical Power & Machines Engineering, Mansoura University, 2005 : M. Sc. in Electrical Power & Machines Engineering, Mansoura University, 2014 LANGUAGES Arabic English : Native Language : Excellent COMPUTER SKILLS : Windows, MS Office, Internet : MS Project : MATLAB, ATP-EMTP, PSCAD, ETAP, LabView, AutoCAD, etc. TRAINING COURSES AND CERTIFICATIONS : Training course in MDEPC by Alstom in Generator & Auxiliaries and Excitation works. : Training course in MDEPC by Alstom in Protection System and Synchronization. : Training course in EEHC In (power Transformer oil tests and determination of the technical state). : Training course in MDEPC in Operation of TALKHA Power Station. : Training course in MDEPC in Electrical Maintenance of TALKHA Power Station. : Training course in MDEPC in Protection Devices of TALKHA Power Station. : Training course in MDEPC in Safety & Fire Fighting of TALKHA Power Station. www.egyptrol.com Page 1 of 3 Updated: Oct. 2014
CHRONOLOGICAL EXPERIENCE RECORD Dates : From Oct. 2005 till now Employer : Middle Delta Electricity Production Company (MDEPC) Projects : New Talkha Power Station, 750MW, Combined Cycle Talkha Power Station, 300MW, Combined Cycle Job title : Sr. Electrical Protection, Testing & Commissioning Engineer Job Description : Installation, pre-commissioning activities and performing the site tests of variety equipments during the installation and erection works for different power stations (private and Government sectors). Schedule preparing of overhaul and maintenance programs and carrying out maintenance and testing works (periodical, preventive, emergency) fault diagnostic, troubleshooting of electrical, measuring, protection and control systems. Responsible for handling and carrying out overall activities for on-site inspection tests, troubleshooting and repair works of all electrical equipments from 400 volts to 220KV AC systems and from 48 volt to 220 volt DC systems. Minor and Major Inspection and Testing for variety of electrical equipments and their utilities in site and other neighbors substations and perform needed maintenance and repair for those equipments. Doing all tests of various protection relays by myself. Familiar with electrical relays currently used in the electric power utility industry and experience with application of relays and metering devices. Performing fault analysis, relay coordination studies and relay settings and preparing and reviewing engineering and designs. Performing the on-site routine tests for all electrical equipments such as Protective relays (electromechanical, static, digital), metering devices, CT s, PT s, CVT s, 220KV GIS switchgears, (HV/MV/LV) C.B's, (HV/MV/LV) transformers, generators and MV/LV motors. Maintain documents like test reports, relay configuration file, final setting file, XRIO filedetc. Stability test of transformer differential schemes, bus bar differential schemes, cable differential schemes, 1 and 1/2 bus bar arrangement schemes, single and double bus bar schemes arrangement. Perform all site testing and commissioning activities in HV Transmission substations and Power Plants including: protective relays, control and interlocking circuits, control and protection panels testing, metering schemes, synchronizing schemes, voltage regulating schemes, bus bar schemes and breaker failure schemes. Developed weekly update record event for project outages and contingency status for all units to share information and high coordination performance. Diagnosed problems and work to solve and define the developmental problems. Moreover, made appropriate repairs with written reports in consultations with technical manuals provided by the manufacturers. Transformers mechanical protection relays tests (Buchhlez relay, pressure relief device, rapid pressure device. Follow up the activities of the specialized companies in the field of producing electrical systems through fairs and seminars, and choosing the appropriate ones. www.egyptrol.com Page 2 of 3 Updated: Oct. 2014
Attend all technical discussions (for any electrical protection problem on TALKHA site). Moreover, attend all meetings with manufacturer companies in the ministry to analyze and investigate the faults and problems which occurred and participation in preparing their reports. Measuring Contact speed & DCR for different types of (HV/MV/LV) C.B's. Testing of Earthing System and Cathodic Protection system. Thermal Imaging for predictive maintenance for electrical equipments "Camera "FLUKE" TI55". Checking and receiving the spare parts and supervising its setting up. Overall control panels scheme checking and its protective relays, and check the incoming and outgoing hard wired and DCS signals. Leakage current for surge arrestors. DGA and breakdown tests of Transformer oil samples using Transformer fault gas analyzer Morgan Schaffer MYRKOS II. Fix many electronic and electrical boards by myself for variety electrical devices and equipments in the station using available possibilities. Measuring and calibration of energy meters. Battery impedance test. Participation in performing many other types of site tests for variety of equipments for instance, ELCID test for generator core, Bump test for generator stator enwinding. Partial Discharge (PD) tests, Tan δ tests, and insulation (Megger) tests for electrical equipments. Generator visual inspection with "GE" XLG3 Video-Probe. And also there are many electrical other tests may be not outlined here. Electrical Equipments in TALKHA POWER STATION: - SIEMENS Generators 313 MVA, 16.5KV. - ALSTOM Generators 310 MVA, 19KV with (ROMON) AMODIS rotor condition monitoring. - HYUNDAI power Transformers 300 MVA, 16.5/220KV. - HYUNDAI power Transformers 310 MVA, 18/220KV. - AREVA power Transformers 310 MVA, 19/220KV. - HYUNDAI auxiliary Transformers 32 MVA, 16.5/6.3KV, and their auxiliary parts. - HYUNDAI distribution Transformers 1.6 MVA, 6.3/0.4KV, and their auxiliary parts. - Online DGA monitoring devices. GE "Hydran 201Ti". - Static Excitation Equipment "SEE" "ALSPA C80" for Generators. - Start-up Frequency Converter "SFC" for Siemens Generators 313 MVA. - Emergency Diesel Generator unit 1.5MW and its auxiliary parts. - ABB Generator Circuit Breaker (SF6) 16.5KV. - 66/220KV o.u tdoor switchgear substations and 220KV indoor GIS with SAS. - Under ground cables (UGC's) 220KV. - Over head transmission lines (OHTL s) 220KV, 66KV. - MV Bus bars and Feeders, C.B's, PCC, MCC, MV Motors and their cables, and digital protection relays. - LV Bus bars, C.B's, Motors and their cables, PCC, MCC, and digital protection relays. www.egyptrol.com Page 3 of 3 Updated: Oct. 2014
- Control panels and Automation (Hard-wire), and Power Distribution System for CTG & STG Units, H.R.S.G's, Pump House building, Chemical Treatment substation and their auxiliary parts. - 125V D.C (Bus bars + Batteries + Battery Chargers + Inverters + UPS systems). - 220V D.C (Bus bars + Batteries + Battery Chargers). - All lighting, cabling, Power supply Systems and heating ventilation system for all building of new TALKHA Power Station Combined Cycle + Pump House building + Chemical Treatment substation. - Cathodic Protection System in site. - Many kinds of digital multifunction protection relays for all electrical equipments on Talkha site. - Various manufacturers relay products like (Schneider, ABB, SIEMENS, AREVA, GE Multilin, TOSHIBA, MITSUBISHI, Detc.). - Synchronizing devices, measuring meters, energy meters D.etc. Field of experience : Teaching a lot of electrical power courses and laboratory training in Electrical Power and Machines Engineering in the University. Work with some private companies in the same field to perform pre-commissioning tests for new projects and update the old fashion protection systems. Have a strong experience in protection philosophies, design, configuration, testing and commissioning. Moreover, a wide knowledge of AC/DC fundamentals; three phase power systems and machines; perunit mathematics and symmetrical components and fault analysis; understanding of substation components and their functions; design documents and drawings necessary to complete a projects; and familiar with international standards related to electrical power system and protection techniques including NEC, IEEE, IEC, DIN, and ANSI. Have a good experience in using computerized testing equipments and to carry out testing of all electrical equipments and type of relays used in power system plant such as: GE ODEN/programma, breaker analyzer TM1600/programma and Vanguard CT-6500, SVERKER 650, 760/programma, CMC356/Omicron, Advanced test set CPC100/OMICRON, low value micro ohm resistance test set MICRO/programma, Megohmmeter Chauvin Arnowx C.A 6545, Earth tester Chauvin Arnowx C.A 6423, AC/DC HIPOT tester BAUR PGK70 HB, DGA Morgan Schaffer MYRKOS II, and MTE PWS3.3, Battery internal impedance (MEGGER BITE 2), Multi Arrester clamp leaker (ALCL 40), Winding resistance test set (WRT-100) ADWEL, GE (XLG3) Video-Probe, Thermal Imaging Camera "FLUKE" TI55,...etc. Expert and highly familiar with many different software used to test and set various protection relays, such as DIGSI for "Siemens", UR for "General Electric", MICOM for "Areva", PSM600 for "ABB"D.etc.). Familiar with LOGICAD software program used for generators excitation system ALSPA C## "ALSTOM". Experienced in the following protection devices: - Siemens (Siprotec): 7UM622. 7UT612. 7SA522. 7SD612. www.egyptrol.com Page 4 of 3 Updated: Oct. 2014
7SS522. 7SJ611. - Areva (Micom): P343 & P345. P645. P445. P841 & P842. P746. P543 & P546. P220. P123 & P120. - ABB: RET615. REG670 & REG650. REL512 & REL650. REF542. RER615. REB611. REJ515. REM610. - GE: T60. T35. L90. G60. D60. Test Devices (secondary testers): - CM6256. - FREJA 300 & Sverker 650. - CBC100 + Access. And familiar with many other devices. www.egyptrol.com Page 5 of 3 Updated: Oct. 2014