EX- series E E' D&D' F K C I H J B Distance between tumblers 0 mm B Undercarriage length 7 70 mm C Counterweight clearance mm D Rear-end swing radius 90 mm D' Rear-end length 190 mm E Overall width of upperstructure 7 30 mm E' Overall width 7 50 mm F Overall height of cab 7 50 mm Min. ground clearance 00 mm H Track gauge 5 000 mm I Track shoe width 1 000 mm J Undercarriage width 000 mm K Track height 00 mm HYDRULIC EXCVTOR Engine ross Power : 1 0 kw (1 00 HP) Operating Weight : EX500- Loading Shovel: 9 000 kg Backhoe : 000 kg Loading Shovel Bucket : PCS Heaped: 15.0 m³ 1.5 m³ Backhoe Bucket : PCS Heaped : 15.0 m³ CECE Heaped : 13. m³
SPECIFICTIONS EX500- ENINE Backhoe UNDERCRRIE Model... Cummins QSKT50-CE Type... Water-cooled, -cycle, 1-cylinder, turbo-charged and after-cooled, direct injection chamber-type diesel engine Rated power DIN 71,net... 99 kw (1 351 PS) at 1 00 min-¹ (rpm) SE J139,net... 99 kw (1 333 HP) at 1 00 min-¹ (rpm) SE J1995, gross... 1 0 kw (1 00 HP) at 1 00 min -¹ (rpm) Maximum torque... 379 N m (51 kgf m) at 1 300 min-¹ (rpm) Piston displacement... 50.0 L Bore and stroke... 159 mm x 159 mm Starting system... V electric motor Batteries... x V, x 0 H Cold starting... Ether aided HYDRULIC SYSTEM Hitachi's ETS (Electronic Total control System) can achieve maximum job efficiency by reducing fuel consumption and noise levels, while maximizing productivity through the optimization of engine-pump functions with excellent controllability increasing operator comfort. E-P Control (Computer-aided Engine-Pump Control system) Main pumps regulated by electric engine speed sensing control system. OHS (Optimum Hydraulic System) main pumps and 3 valves system enable both independent and combined operations of all functions. FPS (Fuel-saving Pump System) FPS minimizes energy loss with superior performance in fine control. uto-idling system for saving fuel and reducing noise. Hydraulic drive cooling-fan system for oil cooler. Forced-lubrication and forced-cooling pump drive system. Main pumps... variable-displacement, axis piston pumps for front attachment and travel Pressure setting... 9. MPa (300 kgf/cm²) Max. oil flow... X 375 L/min Swing pump... variable-displacement, axis piston pumps for swinging Pressure setting... 9. MPa (300 kgf/cm²) Max. oil flow... X 5 L/min Pilot pump... 1 gear pump Pressure setting... 3.9 MPa (0 kgf/cm²) Max. oil flow... L/min Relief Valve Settings Implement circuit... Swing circuit... Travel circuit... Pilot circuit... 9. MPa (300 kgf/cm²) 7.5 MPa (0 kgf/cm²) 9. MPa (300 kgf/cm²) 3.9 MPa ( 0 kgf/cm²) Hydraulic Cylinders High-strength piston rods and tubes adopted. Cylinder cushion mechanisms are provided for boom, arm bucket and dump cylinders. Bucket cylinder of loading shovel is provided with protector. Cylinder Dimensions Loading shovel Quan. Bore Rod diameter Boom 3 mm 30 mm rm 1 0 mm mm Bucket 50 mm 10 mm Dump 15 mm 130 mm Level 1 3 mm 30 mm Quan. Bore Rod diameter Boom 3 mm 30 mm rm 1 0 mm mm Bucket 1 30 mm 170 mm Hydraulic Filters ll hydraulic circuits have high-quality hydraulic filters for protection against oil contamination and longer life of hydraulic components. Qty. Full flow filter 3 µm High pressure strainer 0 meshes (In main & swing pump delivery line) Drain filter 1 µm (For all plunger type pumps & motors) By-pass filter 1 5 µm (In oil cooler by-pass line) Pilot filter 1 µm These filters are centralized in arrangement for facilitating maintenance. CONTROLS Implement Levers Remote-controlled joystick hydraulic servo system. Right lever is for boom and bucket control, left lever for swing and arm control. For loading shovel, pedals provided for opening/closing the bottom dump bucket. Travel Levers with Pedals Remote-controlled hydraulic servo system. Independent drive at each track allows counter rotation of tracks. 17 3 7 1 13 1 Left Console Bucket Close Pedal (For Loading Shovel) Left Control Lever/Horn Switch 11 Bucket Open Pedal (For Loading Shovel) 3 Left Travel Pedal Pilot Control Shut-Off Lever Left Travel Lever 13 Rear Console 5 Right Travel Lever 1 Emergency Engine Stop Switch Right Travel Pedal 15 Engine Speed Control Dial 7 Right Control Lever/Horn Switch 1 Key Switch Right Console 17 Monitor Display 9 Operator s Seat 1 9 5 11 1 15 1 Revolving Frame deep, full-reinforced box section. Heavy-gauge steel plates used for ruggedness. Deck Machinery Maintenance accessibility is the major feature in the lay-out of deck machinery. s provides easy access to engines, hydraulic and electrical components. ISO-meet stairs and handrails. s and stairs are provided with skid-resistant plates. 1 Diesel Engine 1 Hydraulic Tank Pump Drive Unit 15 Fuel Tank 3 Hydraulic Pump x 1 Battery Unit Hydraulic Oil Cooling Fan Motor x 17 Lubricator 5 Hydraulic Oil Cooler x 1 High Pressure Strainer x Engine Radiator 19 Reserve Tank (Engin Oil) 7 LT Radiator 0 Reserve Tank (Coolant) Fuel Cooler 1 ir Filter x (Outer/Inner) 9 Pump Transmission Oil Cooler Muffler Engine-Pump Bulkhead 3 Fuel Filter (Water Separator) 11 Control Valve x 3 Cab Swing Device x 5 Ladder 13 Center Joint Folding Stairs Swing Device high-torque, axial-piston motors with two-stage planetary gear bathed in oil. Swing circle with dirt seals is a heavy-duty, triple-row, cylindrical roller bearing. Induction-hardened internal swing circle gear and pinion immersed in lubricant. Parking brake of springset/hydraulic-released disc type. This parking brake is manually releasable. Swing speed... 3. min-¹ (rpm) : Diesel Operator's Cab The sturdy cab, with the top guard conforming to OP Level ll (ISO), helps protect the operator from falling objects. Independent, pressurized, 1 00 mm wide, 150 mm high, roomy 7.5m³ cab with tinted-glass windows features all-round visibility. ir-suspension type, fully adjustable reclining seat with armrests; movable with or without front & swing control levers by slide. Instrument and control panel are built in cab wall is in easy range of the operator. 3 air conditioner system. Noise level... 7 db() in the cab; on max. engine speed under no-load Eye level height... 90 mm Tracks Shovel-type undercarriage. Dual-flanged-type bolt linkage for side frame and X-form center frame assures durability. Heavy-duty track frame of all-welded, stress-relieved structure. Top-grade materials used for toughness. Lifetime-lubricated induction-hardened track rollers, idlers and drive tumblers with floating seals. Opposed double-type upper rollers for easy removal of mud. Track shoes of induction-hardened cast steel with triple grousers. Specially heat-treated connection pins. Hydraulic track adjuster provided with N gas accumulator with relief valve. Track adjuster provided with protection device against abnormal tension. Travel motion alarm device. Shovel-type Undercarriage Triple grouser track shoes of induction-hardened cast steel. Shoe width... 1 000 mm Numbers of Rollers and Shoes (each Side) Upper rollers... 3 Lower rollers... Track shoes... 39 Travel Device Each track driven by high-torque, axial piston motors, allowing counter rotation of tracks. -stage planetary gear plus spur gears reduction device. Dual-support-type traction device. Parking brake of spring-set/ hydraulic-released disc type. This parking brake is manually releasable. Travel speeds... Diesel High : 0 to.3 km/h Low : 0 to 1. km/h Electric motor High : 0 to. km/h Low : 0 to 1.5 km/h Maximum traction force... 1 330 kn (135 00 kgf) rade ability... 0 % (30 degree) continuous WEIHTS ND ROUND PRESSURE Loading Shovel Equipped with 15.0 m 3 (PCS heaped) bottom dump bucket Shoe Type Shoe Width Operating weight round pressure Triple grousers 1 000 mm 9 000 kg 11 kpa (1.5 kgf/cm ) Backhoe Equipped with 9.0 m boom,. m arm, and 15.0 m 3 (PCS heaped) bucket Shoe type Shoe Width Operating weight round pressure Triple grousers 1 000 mm 000 kg 11 kpa (1. kgf/cm ) SERVICE REFILL CPCITIES litters Fuel tank 5 000 Engine coolant 7 Engine oil 37 Pump drive Swing device ( units) x 0 Travel device ( units) x 137 Hydraulic system 950 Hydraulic oil tank 1 0 LODIN SHOVEL TTCHMENTS Boom and arm are of all-welded, low-stress, high-tensile strength steel full-box section design. Efficient, automatic level crowding achieved by one-lever control because parallel link mechanism keeps the bucket digging angle constant, and level cylinder circuit maintains the bucket height constant (uto-leveling Crowd Mechanism). uto-lubrication system for all pins is standard. 3
SPECIFICTIONS EQUIPMENT WORKIN RNES BCKHOE TTCHMENTS STNDRD EQUIPMENT Standard equipment may vary by country, so please consult your Hitachi dealer for details. Meter 1 1 0 E F E, 150 US ton C B D 1 1 1 0 Meter Bucket Capacity (PCS :1) 15.0 m³ Min. digging distance 5 30 B Min. level crowding distance 7 90 C Level crowding distance 90 D Max. digging reach 1 00 E Max. cutting height 15 0 E Max. dumping height 350 F Max. digging depth 3 70 Working radius at max. dumping height H Max. bucket opening width 150 rm crowding force 91 kn (93 00 kgf) Breakout force 3 kn ( 000 kgf) H Bucket Capacity (PCS :1) 1.5 m³ Min. digging distance 5 00 B Min. level crowding distance 0 C Level crowding distance 90 D Max. digging reach 1 300 E Max. cutting height 15 50 E Max. dumping height 350 F Max. digging depth 3 90 Working radius at max. dumping height H Max. bucket opening width 150 rm crowding force 907 kn (9 500 kgf) Breakout force 7 kn (79 900 kgf) Boom and arm are of all-welded, low-stress, full-box section design. Bucket of all-welded, high-strength steel structure. Bucket/arm joint pins are floating type. Replaceable thrust plates are provided with bucket/arm joint part. utolubrication system for all pins is standard. WORKIN RNES Meter 1 1 1 0 C D B B, E 150 US ton 0 1 1 1 0 Meter, BE-boom length 9.00 m BE-arm length.0 m Max. digging reach 17 00 ' Max. digging reach (on ground) 1 530 B Max. digging depth 00 B' Max. digging depth (' level) 70 C Max. cutting height 1 00 D Max. dumping height 330 E Max. vertical wall 5 070 Bucket digging force ISO 3 kn ( 00 kgf) SE: PCS 751 kn (7 00 kgf) rm crowd force ISO 5 kn ( 0 kgf) SE: PCS 75 kn (7 000 kgf) ENINE alternator Heavy-duty type air cleaner with dust ejector Cartridge-type engine oil filter Cartridge-type engine oil bypass filter Cartridge-type fuel filter Water filter Radiator reserve tank Fan guard Isolation-mounted engine PRELUB system uto-idle system Emergency engine stop system HYDRULIC SYSTEM E-P control system OHS (Optimum Hydraulic System) FPS (Fuel-saving Pump System) Hydraulic drive cooling-fan system Forced-lubrication and forced cooling pump drive system Control valve with main relief valve Suction filter Full-flow filter Bypass filter Pilot filter Drain filter High-pressure strainer CB The sturdy cab, with the top guard conforming to OP Level ll (ISO), helps protect the operator from falling objects. Fulid-filled elastic mounts. Laminated glass windshield. Reinforced/ tinted (bronze color) glass side and rear windows. Parallel-link-type intermittent windshield wiper. Front windshield washer. djustable reclining seat with air suspension. Footrest. ir horn with electric compressor. uto-tuning M-FM radio with digital clock. Seat belt. Storage spaces. Floor mat. ir conditioner with defroster. Rearview mirror. Evacuation hammer. Emergency escape device. Trainer's seat. Pilot control shut-off lever. OPTIONL EQUIPMENT Wiggins couplers. High brightness working lights. Back and right side color monitor camera. MONITOR SYSTEMS Meters: Hourmeter. Fuel gauge. Hydraulic oil temperature gauge. Engine coolant temperature gauge. Tachometer. Engine oil pressure gauge. Engine oil temperature gauge. Battery voltage gauge. mbient temperature. Pilot lamps (reen): Prelub. uto-idle. Travel Mode. Warning lamps (Red): llternator. Engine stop. Coolant overheat. Hydraulic oil level. uto- Lubrication. Fast-filling. Tension. Electric lever. Emergency engine stop. Top valve. Engine over run. Coolant level. Engine oil pressure. Pump transmission oil level indicator. Warning lamp (Yellow): Exhaust temperature. Fuel temperature. Engine warning. Hydraulic oil overheat. Stairway position. Electrical equipment box. Pump contamination. ir cleaner restriction. larm buzzers: Overheat. Engine coolant pressure. Engine coolant level. Fuel temperature. Engine oil pressure. Engine oil temperature. ir intake manifold temperature. Crank case pressure. Pump transmission oil level. Hydraulic oil level. Stop valve close. Fast-fill system panel position (option) Ladder position. Electric lever fault. LIHTS working lights. entrance light. 3 maintenance lights. cab lights. Lockable machine covers 30 000 kg counterweight Hydraulic drive grease gun with hose reel Folding stairs with wide steps. Swing parking brake UNDERCRRIE Travel parking brake Travel motion alarm device Hydraulic track adjuster with N gas accumulator and relief valve 1 000 mm (39") triple grouser shoes MISCELLNEOUS Standard tool kit Stairs and handrails (Meeting ISO) Recirculation air filter for air conditioner Ventilation air filter for air conditioner V power terminal board Stop valve for transport and reassembly uto-lubrication (Lincoln) for frontattachment pins, swing bearing, and center joint Optional equipment may very by country, so please consult your Hitachi dealer for details. Satellite data transmitting system. Travel motor guard. Travel device guard. Bucket (PCS heaped :1) Capacity Width No.of Materials Weight Type teeth density 15.0 m³ 3 590 mm 0 190 kg 1 00 kg/m³ 1.5 m³ 3 590 mm 0 700 kg 1 00 kg/m³ : Bottom dump type general purpose bucket Bucket Capacity PCS CECE (1:1) (:1) heaped heaped Without side cutters Width Without side cutters No.of teeth Weight Type Materials density 1 00 15.0 m³ 13. m³ 3 10 mm - 5 00 kg kg/m³ : eneral purpose bucket 5
TRNSPORTTION Easily assembled owning to local assembling system requiring no welding. Overall width of below 3 500 mm during transportation. Cab assembly Weight : 1 70 kg Cab bed Weight : 50 kg Weight : 7 kg Weight : 70 kg Weight : 77 kg Weight : 9 kg Weight : 19 kg Weight : 0 kg Weight : 1 kg Weight : 17 kg 50 30 90 0 1 50 0 1 770 1 711 39 0 050 1 0 995 1 70 79 995 39 97 Width : 1 0 Width : 1 0 Width : 1 90 Width : 1 90 Width : 1 90 Width : 15 Width : 11 Width : 333 Width : 01 Width : 1 Weight : 5 kg Main frame assembly Weight : 3 000 kg Fuel tank Weight : 500 kg Weight : 1 kg 539 Weight : 1 kg 1 70 Fender Weight : 1 kg Weight : 19 kg 57 1 150 3 50 0 90 30 1 090 90 33 1 90 Width : 1 90 00 950 Width : 3 500 Width : 1 10 Width : 1 000 Width : 53 Width : 00 Width : 5 Weight : 30 kg 0 Weight : 1 kg Weight : kg Weight : 977 kg Lodder Weight : 30 kg 3 Weight : 311 kg Weight : 13 kg 1 0 Weight : 1 kg 1 70 Hose reel Weight : 5 kg 1 0 30 590 1 00 0 1 0 530 3 150 1 90 1 700 1 7 50 7 Width : Width : 315 Width : 1 075 Width : 0 Width : 99 Width : 1 0 Width : 1 0 Width : 75 Width : 5 Weight : 9 kg Fender Weight : 13 kg Weight : 39 kg Weight : 117 kg Weight : 1 kg Weight : 1 kg Weight : 3 kg Weight : kg Weight : 1 kg 1 500 0 00 1 500 1 700 0 1 90 0 1 0 1 00 1 0 75 1 0 1 1 30 737 1 0 1 00 Width : 53 Width : 790 Width : 1 3 Width : 10 Width : 1 Width : 73 Width : 1 Width : 77 Width :
TRNSPORTTION UNDERCRRIE Weight : 9 kg Weight : 37 kg Weight : 3 kg Weight : 11 kg Track center frame assembly Weight : 1 00 kg Track side frame assembly Weight : 31 00 kg X 0 3 90 91 975 1 0 1 0 1 0 1 0 1 50 030 Width : 3 Width : 9 Width : 599 Width : 55 5 00 000 Width : 3 300 Width : 30 with trave device Weight : 1 kg Weight : kg Engine unit Weight : 15 030 kg Door Weight : kg 1 0 9 10 1 0 3 330 1 00 5 Weight : kg Ladder Weight : 13 kg Moter cover stay Weight : 7 kg Width : 55 Width : 3 0 Width : 500 Width : 50 50 1 170 150 ir Cleaners Weight : 3 kg 1 30 1 30 Mufler Weight : 570 kg 1 0 1 90 Weight : 9 kg 5 570 Weight : 133 kg 1 70 1 50 Weight : 1 kg 1 930 Width : 00 90 Width : 03 000 Width : 9 Width : 1 0 Width : 1 350 Width : 55 Width : 53 Width : Weight : 9 kg Weight : kg Weight : 7 kg (190 lb) Weight : 30 kg Counterweight Weight : 9 50 kg Reserve tank Weight : 150 kg 1 0 1 50 1 0 0 1 0 1 930 1 50 939 1 0 1 970 1 970 1 970 Width : 79 Width : 50 Width : 50 Width : 1 07 Width : 1 1 Width : 50 9
TRNSPORTTION LIFTIN CPCITIES LODIN SHOVEL TTCHMENTS Bucket assembly : Load radius B: Load point height C: Lifting capacity Boom-arm assembly Weight : 31 00 kg METRIC MESURE Rating over-side or 30 degree Rating over-front Unit: 1 000 kg B Capacity B Width Weight 15.0 m³ 3 0 mm 3 0 mm 3 0 mm 0 190 kg 1.5 m³ 3 500 mm 3 30 mm 3 0 mm 0 700 kg 3 7 970 Width : 00 Conditions EX500- BE-boom 9.0 m BE-arm. m Bucket PCS : 15.0 m³ CECE : 13. m³ Shoes 1 000 mm Load point height Load radius m m m m 1 m t max. reach m *0.7 *0.7 *.7 *.7 1. m *7.0 *7.0 *.1 *.1 15.7 m *30.5 *30.5 *3. *3. *.0 *.0 1.3 m *5.7 *5.7 *37.9 *37.9.3 *9.5 *.3 *.3 1.5 m 50.9 *5.0 3.7 *.0. *3. *11.0 *11.0 1. m 7. *51.9 3.5 *3. 5. 3. *.3 *.3 1.0 0 (round) 5.9 *9.1 33. *.9. *33. *1.3 *1.3 15. - m *3. *3. 5.5 *50.5 3.7 *39.0 *. *. - m *0. *0. *3. *3. *0.5 *0.5 *9.5 *9.5 meter 3 Bucket cylinders Weight : 1 70 kg X 90 Boom cylinders Weight : 90 kg X Notes: 1.Ratings are based on SE J97..Lifting capacity of the EX Series does not exceed 75% of tipping load with the machine on firm, level ground or 7% full hydraulic capacity. 3.The load point is a hook (not standard equipment) loaded on the back of the bucket..*indicates load limited by hydraulic capacity. 3 90 0 BCKHOE TTCHMENTS BE-boom assembly Weight : 30 000 kg Bucket assembly : 15.0 m 3 Weight : 00 kg 3 50 9 590 Width : 0 3 0 BE-arm assembly Weight : 1 300 kg Width : 3 10 50 5 0 Width : 1 0 11
These specifications are subject to change without notice. Illustrations and photos show the standard models, and may or may not include optional equipment, accessories, and all standard equipment with some differences in color and features. Before use, read and understand the Operator s Manual for proper operation. Hitachi Construction Machinery www.hitachi-c-m.com KS-EN051Q 07.11 (K/K,MT3) Printed in Japan