Specialists in Anti-Vibration Mountings and Rubber Engineering Components

Specialists in Anti-Vibration Mountings and Rubber Engineering Components

Index Mounting Selection Page 1 Cylindrical Bobbins Page 2-7 Buffers & Bump Stops Page 8-11 Instrument & General Purpose Page 12-13 T-Bush Page 14 Vertical Fixings & Shock Mounts Page 15 Captive Transit Mounts Page 16-19 Silent Marine Page 2-22 High Deflection GenSet Mounts Page 23 Flanged Mounts Page 24-25 Cone Mounts Page 26-29 Cab Mounts Page 3-31 Sandwich Mounts Page 32-33 Levelling Feet Page 34-35 Bushes Page 36-37 Springs & Hangers Page 38-41 Miscellaneous Page 42-48

Simple 6 Step Guide to Mounting Selection: 1. Determine the total weight of the equipment & number of mountings required 2. Calculate the weight on each mounting (Consider that weight may not be evenly distributed) 3. Determine the running speed (or forcing frequency) of the equipment. 4. Determine the static deflection of the mounting from the chart below (Generally 7% Isolation is acceptable for most applications) 5. Based on the load per mounting, select a suitable mounting type to give the required static deflection, taking into account the specific application requirements, such as whether the equipment is Mobile or Static. 6. Ensure that all connections & services to the equipment, such as exhausts, pipework and ducting are flexible in order to allow the equipment to move freely In addition, other factors that should be taken into account, such as: Contamination with Oil, Fuel, Chemicals & extreme Temperatures Corrosive Environments Off Shore Rigs, High Humidity. High G forces Off-Road Vehicles, Construction Plant, Military Shock Protection to protect fragile equipment from drops & impacts. Foundation should be Level & Flat. Extra care is required for Suspended Floors Suspension Springs to accoodate movement. I.e. Vibratory rollers, compactors, screens Low Speed Equipment Fans, Chillers, Blowers & Air-Conditioning Units. Trunion Bushes & Suspension Bushes Angular & Torsional Movements Human Vibration i.e. ISO 2631 Mechanical Vibrations i.e. ISO7919 & ISO1816 We offer a full technical & engineering back up service. If you would like help in selecting suitable mountings for your application, please contact our technical department for assistance. AV INDUSTRIAL PRODUCTS Telephone: +44 ()116 2461 261 Fax: +44 ()116 2768 934 Email: mail@avindustrialproducts.co.uk Website: www.avindustrialproducts.co.uk 1

Male - Male Bobbins Bobbin Mounts are a low cost solution to reducing vibration & shock. They can be used in either Compression or Shear or a combination, and are available with various thread configurations. Additional Sizes are available, Plus Stainless Steel metals and Oil Resistant / High Temperature rubbers available on request. Applications include - General Purpose mountings, popular in a wide range of applications & industries including Diesel Engines, Generator Sets, Instruments, Industrial Machinery & Equipment. Weight range from 1kg to Kg per mounting. PART D x H V x I 45 IRHD 6 IRHD 7 IRHD 88MM6 8 x 8 M3 x 6 1.8 3.3 4.5.6 8MM1 1 x 8 M4 x 1 2.3 4.3 6.6 11MM1 1 x 1 M4 x 1 2 3.4 5.5.8 1111MM1 11 x 11 M4 x 1 2.1 4.5 6.5 158MM1 15 x 8 M4 x 1 7.7 14.1 19.5.6 1515MM13 15 x 15 M4 x 13 5.8 1.7 15 1.3 1515MM15 15 x 15 M5 x 15 5.8 1.7 15 1.3 1515MM12 15 x 15 M6 x 12 5.8 1.7 15 1.3 1525MM1 15 x 25 M4 x 1 2.3 5.8 7.1 2 8MM18 2 x 8 M6 x 18 16.6 31 42.8 215MM18 2 x 15 M6 x 18 9 17 23 1.2 22MM18 2 x 2 M6 x 18 7 13 18 1.6 225MM18 2 x 25 M6 x 18 6.7 12 17 2.2 23MM18 2 x 3 M6 x 18 5.3 9.6 13.5 2.6 251MM18 25 x 1 M6 x 18 25 48 66.7 2515MM18 25 x 15 M6 x 18 18 34 48 1.2 252MM18 25 x 2 M6 x 18 16 29 39 1.6 252MM2 25 x 2 M8 x 2 16 29 39 1.6 2522MM2 25 x 22 M8 x 2 14.4 27 36 1.8 2525MM18 25 x 25 M6 x 18 12.4 23 32 2.1 253MM18 25 x 3 M6 x 18 11.5 22 29 2.7 253MM2 25 x 3 M8 x 2 11.5 22 29 2.7 315MM2 3 x 15 M8 x 2 22 41 57 1.1 32MM15 3 x 2 M8 x 15 2 38 51 1.6 32MM2 3 x 2 M8 x 2 2 38 51 1.6 322MM2 3 x 22 M8 x 2 19 34 47 1.8 325MM2 3 x 25 M8 x 2 17 29 4 2.1 33MM2 3 x 3 M8 x 2 15 28 38 2.6 34MM2 3 x 4 M8 x 2 14 27 36 3.6 42MM23 4 x 2 M8 x 23 41 77 16 1.6 42MM25 4 x 2 M1 x 25 41 77 16 1.6 425MM25 4 x 25 M1 x 25 38 71 97 2.1 428MM25 4 x 28 M1 x 25 35 65 89 2.4 43MM23 4 x 3 M8 x 23 33 62 87 2.6 43MM25 4 x 3 M1 x 25 33 62 87 2.6 435MM23 4 x 35 M8 x 23 3 56 78 3.1 435MM25 4 x 35 M1 x 25 3 56 78 3.1 44MM23 4 x 4 M8 x 23 29 54 74 3.6 44MM25 4 x 4 M1 x 25 29 54 74 3.6 445MM25 4 x 45 M1 x 25 28 52 73 4.1 52MM28 5 x 2 M1 x 28 85 159 219 1.5 525MM25 5 x 25 M1 x 25 79 147 23 2 PART D x H V x I 45 IRHD 6 IRHD 7 IRHD 53MM23 5 x 3 M8 x 23 68 125 173 2.5 53MM28 5 x 3 M1 x 28 68 125 173 2.5 535MM25 5 x 35 M1 x 25 59 11 151 3 54MM25 5 x 4 M1 x 25 49 91 126 3.5 54MM28 5 x 4 M1 x 28 49 91 126 3.5 545MM25 5 x 45 M1 x 25 44 82 114 4 55MM25 5 x 5 M1 x 25 4 76 14 4.5 625MM25 6 x 25 M1 x 25 122 227 314 2 63MM25 6 x 3 M1 x 25 18 276 2.5 635MM25 6 x 35 M1 x 25 16 197 272 3.1 635MM37 6 x 35 M12 x 37 16 197 272 3.1 64MM25 6 x 4 M1 x 25 98 183 249 3.5 64MM37 6 x 4 M12 x 37 98 183 249 3.5 645MM25 6 x 45 M1 x 25 89 166 23 4 645MM37 6 x 45 M12 x 37 89 166 23 4 65MM37 6 x 5 M12 x 37 8 149 25 4.5 6535MM25 65 x 35 M1 x 25 129 24 332 3 73MM25 7 x 3 M1 x 25 17 317 432 2.4 73MM37 7 x 3 M12 x 37 17 317 432 2.4 735MM25 7 x 35 M1 x 25 15 298 411 2.9 735MM37 7 x 35 M12 x 37 15 298 411 2.9 74MM25 7 x 4 M1 x 25 139 258 357 3.4 74MM37 7 x 4 M12 x 37 139 258 357 3.4 745MM25 7 x 45 M1 x 25 125 232 312 3.9 745MM37 7 x 45 M12 x 37 125 232 312 3.9 75MM25 7 x 5 M1 x 25 114 211 292 4.4 75MM37 7 x 5 M12 x 37 114 211 292 4.4 7525MM37 75 x 25 M12 x 37 221 42 577 1.9 7535MM37 75 x 35 M12 x 37 17 34 47 2.9 754MM37 75 x 4 M12 x 37 15 28 386 3.4 755MM37 75 x 5 M12 x 37 143 268 37 4.4 7555MM37 75 x 55 M12 x 37 125 235 324 4.9 83MM35 8 x 3 M14 x 35 27 512 74 2.4 3MM44 x 3 M16 x 44 46 88 121 2.2 4MM44 x 4 M16 x 44 37 67 925 3.2 5MM44 x 5 M16 x 44 29 525 725 4.2 55MM44 x 55 M16 x 44 27 5 69 4.7 6MM44 x 6 M16 x 44 26 47 65 5.2 75MM44 x 75 M16 x 44 215 38 525 6.7 MM44 x M16 x 44 165 295 41 9.2 1575MM44 15 x 75 M16 x 44 65 1196 1651 6.7 DATA SHEET MM 211. Max compression load in Kg deflection in. 2 AV INDUSTRIAL PRODUCTS Telephone: +44 ()116 2461 261 Fax: +44 ()116 2768 934 Email: mail@avindustrialproducts.co.uk Website: www.avindustrialproducts.co.uk

Male - Female Bobbins Bobbin Mounts are a low cost solution to reducing vibration & shock. They can be used in either Compression or Shear or a combination, and are available with various thread configurations. Additional Sizes are available, Plus Stainless Steel metals and Oil Resistant / High Temperature rubbers available on request. Applications include - General Purpose mountings, popular in a wide range of applications & industries including Diesel Engines, Generator Sets, Instruments, Industrial Machinery & Equipment. Weight range from 1kg to Kg per mounting. PART D x H V x I d 45 IRHD 6 IRHD 7 IRHD 8MF1 1 x 8 M4 x 1 M4 2.4 4.4 6.2.6 11MF6 1 x 1 M4 x 6 M4 2.1 4. 5.5.8 1513MF1 15 x 13 M4 x 1 M4 4. 7.8 1.8 1.1 1515MF1 15 x 15 M4 x 1 M4 6. 11. 15.4 1.3 215MF18 2 x 15 M6 x 18 M6 9.3 17.5 24. 1.2 22MF18 2 x 2 M6 x 18 M6 7.2 13.4 18.5 1.6 23MF18 2 x 3 M6 x 18 M6 5.5 9.9 13.9 2.6 2515MF18 25 x 15 M6 x 18 M6 18.5 35. 49. 1.2 252MF13 25 x 2 M8 x 13 M8 16.5 3. 4. 1.6 2525MF18 25x 25 M6 x 18 M6 12.8 24. 33. 2.1 253MF2 25 x 3 M8 x 2 M8 11.8 23. 3. 2.7 315MF2 3 x 15 M8 x 2 M8 23. 42. 59. 1.1 32MF13 3 x 2 M8 x 13 M8 21. 39. 53. 1.6 32MF2 3 x 2 M8 x 2 M8 21. 39. 53. 1.6 325MF15 3 x 25 M8,M6x15 M8,M6 17.5 3. 41. 2.1 325MF2 3 x 25 M8 x 2 M8 17.5 3. 41. 2.1 33MF15 3 x 3 M8 x 15 M8 15.5 29. 39. 2.6 33MF2 3 x 3 M8 x 2 M8 15.5 29. 39. 2.6 34MF2 3 x 4 M8 x 2 M8 14.5 28. 37. 3.6 42MF23 4 x 2 M8 x 23 M8 42. 79. 19. 1.6 42MF25 4 x 2 M1 x 25 M1 42. 79. 19. 1.6 425MF2 4 x 25 M8 x 2 M8 39. 73.. 2.1 43MF23 4 x 3 M8 x 23 M8 34. 64. 89. 2.6 43MF16 4 x 3 M8 x 16 M8 34. 64. 89. 2.6 43MF25 4 x 3 M1 x 25 M1 34. 64. 89. 2.6 435MF23 4 x 35 M8 x 23 M8 31. 57. 8. 3.1 435MF25 4 x35 M1 x 25 M1 31. 57. 8. 3.1 44MF23 4 x 4 M8 x 23 M8 3. 55. 76. 3.6 44MF25 4 x 4 M1 x 25 M1 3. 55. 76. 3.6 52MF28 5 x 2 M1 x 28 M1 87. 164. 226. 1.5 525MF25 5 x 25 M1 x 25 M1 81. 151. 29. 2. 53MF25 5 x 3 M1 x 25 M1 7. 129. 178. 2.5 PART D x H V x I d 45 IRHD 6 IRHD 7 IRHD 535MF25 5 x 35 M1 x 25 M1 61. 113. 156. 3. 54MF25 5 x 4 M1 x 25 M1 5. 94. 13. 3.5 545MF28 5 x 45 M1 x 28 M1 45. 84. 117. 4. 55MF25 5 x 5 M1 x 25 M1 41. 78. 17. 4.5 625MF25 6 x 25 M1 x 25 M1 126. 234. 323. 2. 63MF25 6 x 3 M1 x 25 M1 111. 26. 284. 2.5 636MF25 6 x 36 M1 x 25 M1 19. 23. 28. 3.1 636MF37 6 x 36 M12 x 37 M12 19. 23. 28. 3.1 64MF25 6 x 4 M1 x 25 M1 11. 188. 256. 3.5 64MF37 6 x 4 M12 x 37 M12 11. 188. 256. 3.5 645MF25 6 x 45 M1 x 25 M1 92. 171. 237. 4. 6535MF25 65 x 35 M1 x 25 M1 133. 247. 342. 3. 654MF37 65 x 4 M12 x 37 M12 118. 216. 298. 3.5 6545MF37 65 x 45 M12 x 37 M12 13. 19. 264. 4. 655MF37 65 x 5 M12 x 37 M12 88. 163. 226. 4.5 73MF37 7 x 3 M12 x 37 M12 175. 326. 445. 2.4 74MF25 7 x 4 M1 x 25 M1 143. 266. 367. 3.4 745MF25 7 x 45 M1 x 25 M1 129. 239. 321. 3.9 745MF37 7 x 45 M12 x 37 M12 129. 239. 321. 3.9 75MF37 7 x 5 M12 x 37 M12 117. 217. 3. 4.4 76MF37 7 x 6 M12 x 37 M12 116. 214. 296. 5.4 7525MF37 75 x 25 M12 x 37 M12 221 42 577 1.9 754MF37 75 x 4 M12 x 37 M12 154. 288. 397. 3.4 755MF37 75 x 5 M12 x 37 M12 147. 276. 381. 4.4 7555MF37 75 x 55 M12 x 37 M12 128. 242. 333. 4.9 5MF44 x 5 M16 x 44 M16 3. 54. 75. 4.2 55MF44 x 55 M16 x 44 M16 275. 515. 71. 4.7 6MF44 x 6 M16 x 44 M16 265. 48. 67. 5.2 75MF44 x 75 M16 x 44 M16 22. 39. 54. 6.7 MF44 x M16 x 44 M16 17. 3. 42. 9.2 1555MF41 15 x 55 M16 x 41 M16 55. 92. 1296. 4.7 1575MF44 15 x 75 M16 x 44 M16 4. 72.. 6.7 DATA SHEET MF 211. Max compression load in Kg deflection in. AV INDUSTRIAL PRODUCTS Telephone: +44 ()116 2461 261 Fax: +44 ()116 2768 934 Email: mail@avindustrialproducts.co.uk Website: www.avindustrialproducts.co.uk 3

Female - Female Bobbins Bobbin Mounts are a low cost solution to reducing vibration & shock. They can be used in either Compression or Shear or a combination, and are available with various thread configurations. Additional Sizes are available, Plus Stainless Steel metals and Oil Resistant / High Temperature rubbers available on request. Applications include - General Purpose mountings, popular in a wide range of applications & industries including Diesel Engines, Generator Sets, Instruments, Industrial Machinery & Equipment. Weight range from 1kg to Kg per mounting. PART D x H d 45 IRHD 6 IRHD 7 IRHD 1515FF4 15 x 15 M4 6.1 11.2 15.8 1.3 215FF6 2 x 15 M6 7.9 14.8 2.5 1. 22FF6 2 x 2 M6 7.4 13.7 18.9 1.6 225FF6 2 x 25 M6 7. 12.6 17.8 2.2 23FF6 2 x 3 M6 5.6 1. 14.1 2.6 2515FF6 25 x 15 M6 15.7 3. 42. 1. 252FF6 25 x 2 M6 16.8 31. 41. 1.6 2525FF6 25 x 25 M6 13. 25. 34. 2.1 32FF8 3 x 2 M8 15.7 3. 4. 1.2 325FF8 3 x 25 M8 18. 31. 42. 2.1 33FF8 3 x 3 M8 15.8 3. 4. 2.6 34FF8 3 x 4 M8 14.7 29. 38. 3.6 42FF8 4 x 2 M8 32. 61. 88. 1.2 425FF8 4 x 25 M8 37. 68. 93. 2.4 43FF8 4 x 3 M8 35 65 91. 2.6 43FF1 4 x 3 M1 35. 65. 91. 2.6 435FF8 4 x 35 M8 27. 54. 79. 2.5 435FF1 4 x 35 M1 27. 54. 79. 2.5 44FF8 4 x 4 M8 31. 57. 78. 3.6 44FF1 4 x 4 M1 31. 57. 78. 3.6 445FF1 4 x 45 M1 3. 56. 77. 4.1 525FF1 5 x 25 M1 76. 14. 193. 2.1 53FF1 5 x 3 M1 71. 131. 18. 2.5 535FF1 5 x 35 M1 62. 115. 158. 3. 54FF1 5 x 4 M1 51. 95. 132. 3.5 545FF1 5 x 45 M1 46. 86. 12. 4. 55FF1 5 x 5 M1 42. 86. 19. 4.5 PART D x H d 45 IRHD 6 IRHD 7 IRHD 635FF12 6 x 35 M12 111. 26. 285. 3.1 64FF1 6 x 4 M1 13. 192. 261. 3.5 64FF12 6 x 4 M12 13. 192. 261. 3.5 645FF1 6 x 45 M1 93. 174. 241. 4. 645FF12 6 x 45 M12 93. 174. 241. 4. 65FF12 6 x 5 M12 84. 156. 215. 4.5 6535FF12 65 x 35 M12 135. 252. 348. 3. 73FF1 7 x 3 M1 178. 33. 45. 2.4 735FF1 7 x 35 M1 157. 312. 43. 2.9 735FF12 7 x 35 M12 157. 312. 43. 2.9 74FF1 7 x 4 M1 145. 27. 375. 3.4 745FF1 7 x 45 M1 13. 24. 327. 3.9 745FF12 7 x 45 M12 13. 24. 327. 3.9 75FF1 7 x 5 M1 12. 22. 35. 4.4 75FF12 7 x 5 M12 12. 22. 35. 4.4 76FF12 7 x6 M12 118. 218. 3. 5.4 77FF1 7 x 7 M1 113. 21. 29. 6.4 754FF12 75 x 4 M12 157. 29. 4. 3.4 755FF12 75 x 5 M12 15. 28. 39. 4.4 7555FF12 75 x 55 M12 13. 245. 34. 4.9 4FF16 x 4 M16 39. 7. 97. 3.2 45FF16 x 45 M16 345. 625. 865. 3.7 5FF16 x 5 M16 35. 55. 76. 4.2 55FF16 x 55 M16 28. 52. 72. 4.7 6FF16 x 6 M16 27. 49. 68. 5.2 FF16 x M16 175. 35. 43. 9.2 1575FF16 15 x 75 M16 45. 725. 11. 6.7 DATA SHEET FF 211. Max compression load in Kg deflection in. 4 AV INDUSTRIAL PRODUCTS Telephone: +44 ()116 2461 261 Fax: +44 ()116 2768 934 Email: mail@avindustrialproducts.co.uk Website: www.avindustrialproducts.co.uk

Waisted Bobbins Waisted Bobbin Mounts offer low shear stiffness properties, and are available with various Thread configurations. Stainless Steel metals and Oil Resistant / High Temperature rubbers available on request. Applications include - Lightweight equipment, vibratory feeders, electric motors, control panels etc. NOTE: PARTS ALSO AVAILABLE IN MALE FEMALE VERSION D G H I V 45 IRHD 6 IRHD 7 IRHD DEF. PART NUMBER KG KG KG 8WMM6 1 4.5 8 6 M3 - - - - 11WMM1 1 8 1 1 M4 - - - - 15/8.5/15WMM1 15 8.5 15 1 M4 4.3 8.5 12.5 1.8 15/12/15WMM1 15 12 15 1 M4 6.9 13.8 2.3 2.1 15/12/15WMM12 15 12 15 12 M6 6.9 13.8 2.3 2.1 215WMM1 2 14 15 1 M4 - - - - 219WMM18 2 14 19 18 M6 1 15 2.5 2.5 2/12/3WMM18 2 12 3 18 M6 - - - - 2/14/3WMM1 2 14 3 1 M4 - - - - 25/17/2WMM18 25 17 2 18 M6 14.5 22 3.5 3 25/18/2WMM23 25 18 2 23 M8 - - - - 3/22/2WMM23 3 22 2 23 M8 - - - - 3/25/2WMM23 3 25 2 23 M8 - - - - 325WMM15 3 18 25 15 M6 - - - - 341WMM2 3 2 41 2 M8 - - - - 4/25/3WMM23 4 25 3 23 M8 - - - - 4/33/3WMM23 4 33 3 23 M8 - - - - 448WMM23 4 2 48 23 M8 - - - - 4625WMM28 46 4 25 28 M1 - - - - 53WMM28 5 42 3 28 M1 - - - - 5545WMM28 55 44 45 28 M8 - - - - 57/25/44WMM28 57 25 44 28 M1 - - - - 57/44/45WMM28 57 44 45 28 M1 - - - - 57/25/45WMM2 57 25 45 2 M8 - - - - 66WMM28 6 49 6 28 M1 - - - - 753WMM28 7 45 53 28 M12 - - - - 9575WMM41 95 8 75 41 M16 - - - - 18/148/75WMM34 18 148 75 34 M2 - - - - 18/15/75WMM45 18 15 75 45 M2 - - - - 138WMM 35 24 34 2 M8 15 3 4 2.7 DATA SHEET WMM/1 211. Max compression load in Kg deflection in. AV INDUSTRIAL PRODUCTS Telephone: +44 ()116 2461 261 Fax: +44 ()116 2768 934 Email: mail@avindustrialproducts.co.uk Website: www.avindustrialproducts.co.uk 5

Interleaf Bobbin Interleaf Bobbin Mounts are produced with an integrally bonded interleaf metal to increase the load capacity, they are ideal where large compressive forces need to be accoodated with relatively small amounts of deflection on the product. Applications include - Vibratory rollers, sieves and grading equipment, Industrial Machinery including diesel engines etc PART No. A B C D IRHD (Kg) 6 7 IB1392* 57 37 25 M1 25 34 2.6 IB1388 57 37 25 M1 14 198 3 * Metal Interleaf Profiled Bobbin Profiled Bobbin Mounts are ideal for applications where high dynamic forces are applied, particularly when being used in Shear or Shear/Compression. The oversized end metals allows for an improved bonded interface between the rubber & metal, to increase the fatigue life when the parts are used for high dynamic applications. Applications include - Vibratory rollers, sieves and grading equipment, Industrial Machinery including diesel engines etc PART No. D d H G1 G2 25/22-22 26 22 22 M8x1 M8x18 4/35-28 4 35 28 M1x16 M1x2 46/4-25 46 4 25 M1x28 M1x28 75/7-4 75 7 4 M12x37 M12x37 /95-55 95 55 M16x41 M16x41 /95-75 95 75 M16x45 M16x45 DATA SHEET IB/PB 211. Max compression load in Kg deflection in. 6 AV INDUSTRIAL PRODUCTS Telephone: +44 ()116 2461 261 Fax: +44 ()116 2768 934 Email: mail@avindustrialproducts.co.uk Website: www.avindustrialproducts.co.uk

Male - Male Hexagon Bobbins Hexagon Bobbin Mounts having hexagonal end metals, so that mountings can be held with a spanner to avoid twisting the rubber during installation. Can be used in Compression or Shear or a combination. Applications include - General Purpose mountings for lightweight industrial equipment having weight range from 1Kg to 11Kg per mounting. COMPRESSION LOAD SHEAR LOAD PART D x H V x L MAX Kg MAX MAX Kg MAX 1382/45 16 x 16 M6 x 12 4. 1. 3.8 3.8 1382/6 16 x 16 M6 x 12 8. 1. 3.2 1.8 1383/45 21 x 19 M8 x 2 8. 1.2 7. 6.5 1383/6 21 x 19 M8 x 2 16. 1.2 6.5 2.7 1384/45 32 x 26 M8 x 16 16. 2. 1. 7. 1384/6 32 x 26 M8 x 16 31. 2. 11. 3.5 1385/45 33 x 22 M1 x 25 29. 1.5 13. 4.5 1385/6 33 x 22 M1 x 25 57. 1.5 14. 2.5 1386/45 43 x 25 M12 x 3 58. 1.7 28. 6. 1386/6 43 x 25 M12 x 3 11. 1.7 3. 3. HEX/6 32 x 23 M8 x 18 36. 1.5 13. 3.5 Bemag Mountings Applications include - Bemag Mountings are ideal for applications where high dynamic forces are experienced, such as Vibratory Rollers, Compactors & Construction Equipment. PART NO. Ø H h1 h2 BM154MF17 15 4 17 F BM154MM13/18 15 4 13 18 BM154MM28 15 4 28 28 BM1555MF17 15 55 17 F BM1555MM26/15 15 55 26 15 BM1555MM36/25 15 55 36 25 F DENOTES M16 FEMALE THREAD DATA SHEET HEX/1 - BM/1 211. Max compression load in Kg deflection in. AV INDUSTRIAL PRODUCTS Telephone: +44 ()116 2461 261 Fax: +44 ()116 2768 934 Email: mail@avindustrialproducts.co.uk Website: www.avindustrialproducts.co.uk 7

Male - Flat Buffers Flat Buffers are a low cost solution to absorbing shock & vibration. They are used in compression, and are available with various mounting configurations. Additional Sizes are available, Plus Stainless Steel metals and Oil Resistant / High Temperature rubbers available on request. Applications include - General purpose mountings used in a wide variety of applications, including Construction, Agricultural, Coercial Vehicle & General Industrial Machinery. Also used as machinery feet. PART D x H V x I 45 IRHD 6 IRHD 7 IRHD 88MFB6 8 x 8 M3 x 6 7.5 1.5 15. 2. 8MFB1 1 x 8 M4 x 1 9.5 14. 19.5 2. 158MFB1 15 x 8 M4 x 1 31. 45.5 63. 2. 1513MFB1 15 x 13 M4 x 1 14.5 22.5 31. 3.3 1618MFB1 16 x 18 M4 x 1 16. 23.5 33. 5. 8MFB18 2 x 8 M6 x 18 46.5 68. 94. 2. 212MFB18 2 x 12 M6 x 18 4. 59.5 82. 3. 215MFB18 2 x 15 M6 x 18 34. 51.5 71. 3.75 22MFB18 2 x 2 M6 x 18 26. 39. 53.5 5. 225MFB18 2 x 25 M6 x 18 27. 41. 56.5 6.25 23MFB18 2 x 3 M6 x 18 21.5 31. 43.5 7.5 258MFB18 25 x 8 M6 x 18 114. 19. 231. 2. 251MFB2 25 x 1 M8 x 2 16.5 155. 213.5 2.5 2515MFB18 25 x 15 M6 x 18 68. 14. 145.5 3.75 2518MFB18 25 x 18 M6 x 18 69.5 12. 141. 4.25 252MFB18 25 x 2 M6 x 18 63. 93. 126. 5. 252MFB2 25 x 2 M8 x 2 63. 93. 126. 5. 2525MFB18 25 x 25 M6 x 18 44.5 66. 92. 6.25 253MFB2 25 x 3 M8 x 2 39. 58. 77.5 7.5 312MFB2 3 x 12 M8 X 2 97. 139.5 21. 3.25 315MFB2 3 x 15 M8 x 2 88.3 132. 184.5 3.75 317MFB2 3 x 17 M8 x 2 82. 121. 167. 4.25 32MFB2 3 x 2 M8 x 2 75.5 113.5 155. 5. 322MFB2 3 x 22 M8 x 2 69. 12. 14.5 5.5 325MFB2 3 x 25 M8 x 2 63. 97. 131. 6.25 33MFB2 3 x 3 M8 x 2 52.5 77.5 16.5 7.5 34MFB2 3 x 4 M8 x 2 53.5 78.5 18.5 1. 42MFB23 4 x 2 M8 x 23 155. 233. 333.5 5. 42MFB25 4 x 2 M1 x 25 155. 233. 333.5 5. 425MFB25 4 x 25 M1 x 25 136. 24. 281.5 6.3 428MFB23 4 x 28 M1 x 25 124. 184.5 252. 6.8 43MFB23 4 x 3 M8 x 23 116.5 174.5 242.5 7.5 43MFB25 4 x 3 M1 x 25 116.5 174.5 242.5 7.5 435MFB23 4 x 35 M8 x 23 13. 153.5 213.5 8.8 44MFB23 4 x 4 M8 x 23 97. 145.5 199. 1. PART D x H V x I 45 IRHD 6 IRHD 7 IRHD 44MFB25 4 x 4 M1 x 25 97. 145.5 199. 1. 515MFB25 5 x15 M1 x 25 283. 422. 581. 3.8 518MFB25 5 x18 M1 x 25 36. 48. 69. 4. 52MFB28 5 x 2 M1 x 28 343. 511. 75. 5. 521MFB25 5 x 21 M1 x 25 344. 514. 78. 5.3 525MFB25 5 x 25 M1 x 25 3.5 446. 616. 6.3 53MFB25 5 x 3 M1 x 25 247. 364. 54. 7.5 54MFB25 5 x 4 M1 x 25 17. 252. 349. 1. 545MFB25 5 x 45 M1 x 25 15.5 223. 31.5 11.3 55MFB25 5 x 5 M1 x 25 136. 23.5 281.5 12.5 625MFB25 6 x 25 M1 x 25 514. 669.5 157. 6.3 63MFB37 6 x 3 M12 x 37 436. 64. 883. 7.5 64MFB25 6 x 4 M1 x 25 378. 562.5 766. 1. 64MFB37 6 x 4 M12 x 37 378. 562.5 766. 1. 65MFB37 6 x5 M12 x 37 3. 446. 616. 12.5 735MFB25 7 x 35 M1 x 25 548. 873.5 123. 8.8 735MFB37 7 x 35 M12 x 37 548. 873.5 123. 8.8 74MFB25 7 x4 M1 x 25 494.5 737. 119. 1. 74MFB37 7 x 4 M12 x 37 494.5 737. 119. 1. 745MFB25 7 x 45 M1 x 25 436.5 65. 873. 11.25 745MFB37 7 x 45 M12 x 37 436.5 65. 873. 11.25 7525MFB37 75 x 25 M12 x 37 883. 1339. 1843. 6.25 753MFB37 75 x 3 M12 x 37 879. 139. 187. 7.5 754MFB37 75 x 4 M12 x 37 533. 96. 131. 1. 755MFB37 75 x 5 M12 x 37 495. 737. 118.5 12.5 7555MFB37 75 x 55 M12 x 37 427. 64. 883. 13.76 83MFB35 8 x 3 M14 x 35 128. 1552. 2134. 7.5 88MFB35 8 x8 M14 x 35 47. 61.5 824.5 2.5 3MFB41 x 3 M16 x 41 1821. 3648. 492. 7.5 4MFB44 x 4 M16 x 44 16. 2376. 325. 1. 5MFB41 x 5 M16 x 41 1358. 222. 2794. 12.5 55MFB44 x 55 M16 x 44 1251. 1891. 257. 13.75 6MFB44 x 6 M16 x 44 1115. 1649. 2275. 15. MFB44 x M16 x 44 63. 936. 129. 25. DATA SHEET MFB 211. Max compression load in Kg deflection in. 8 AV INDUSTRIAL PRODUCTS Telephone: +44 ()116 2461 261 Fax: +44 ()116 2768 934 Email: mail@avindustrialproducts.co.uk Website: www.avindustrialproducts.co.uk

Female - Flat Buffers Flat Buffers are a low cost solution to absorbing shock & vibration. They are used in compression, and are available with various mounting configurations. Additional Sizes are available, Plus Stainless Steel metals and Oil Resistant / High Temperature rubbers available on request. Applications include - General purpose mountings used in a wide variety of applications, including Construction, Agricultural, Coercial Vehicle & General Industrial Machinery. Also used as machinery feet. PART D x H d 45 IRHD 6 IRHD 7 IRHD 151FFB4 15 x 1 M4 26.5 35. 47. 2.5 1515FFB4 15 x 15 M4 21. 3.5 42.5 3.75 152FFB4 15 x 2 M4 15.5 23. 32. 5. 215FFB6 2 x 15 M6 34.5 52.5 72.5 3.75 22FFB6 2 x 2 M6 26.5 39.5 54.5 5. 225FFB6 2 x 25 M6 27.5 41.5 57.5 6.25 23FFB6 2 x 3 M6 22. 31.5 44.5 7.5 2515FFB6 25 x 15 M6 69. 16. 148.5 3.75 2517FFB6 25 x 17 M6 67.5 11. 14. 4.25 252FFB6 25 x 2 M6 64.5 95. 128.5 5. 2525FFB6 25 x 25 M6 45.5 67.5 94. 6.25 253FFB6 25 x 3 M6 39.5 59.5 79. 7.5 315FFB8 3 x 15 M8 9. 134.5 188. 3.75 317FFB8 3 x 17 M8 83. 129.5 175. 4.25 32FFB6 3 x 2 M6 77. 116. 158.5 5. 325FFB8 3 x 25 M8 55.5 84. 119. 6.25 33FFB8 3 x3 M8 53.5 79. 19. 7.5 34FFB8 3 x 4 M8 54.5 8. 111. 1. 42FFB8 4 x 2 M8 158. 238. 327. 5. 42FFB1 4 x 2 M1 158. 238. 327. 5. 425FFB8 4 x 25 M8 139. 28. 287. 6.25 427FFB8 4 x 27 M8 125.5 186.5 255.7 6.75 428FFB1 4 x 28 M1 127. 188. 257. 7. 43FFB8 4 x 3 M8 119. 178. 248. 7.5 43FFB1 4 x 3 M1 119. 178. 248. 7.5 435FFB8 4 x 35 M8 15. 156. 218. 8.75 44FFB8 4 x 4 M8 99. 148. 23. 1. PART D x H d 45 IRHD 6 IRHD 7 IRHD 521FFB1 5 x 21 M1 352. 525. 723. 5. 525FFB1 5 x 25 M1 37. 455. 629. 6.25 53FFB12 5 x 3 M12 252. 371. 515. 7.5 54FFB1 5 x 4 M1 173. 257. 356. 1. 545FFB1 5 x 45 M1 153. 228. 317. 11.25 55FFB1 5 x 5 M1 139. 28. 287. 12.5 625FFB1 6 x 25 M1 525. 683. 179. 6.25 64FFB1 6 x 4 M1 386. 574. 78. 1. 64FFB12 6 x 4 M12 386. 574. 78. 1. 645FFB12 6 x 45 M12 347. 515. 713. 11.25 65FFB12 6 x 5 M12 37. 455. 629. 12.5 74FFB1 7 x 4 M1 55. 752. 14. 1. 74FFB12 7 x 4 M12 55. 752. 14. 1. 745FFB1 7 x 45 M1 446. 663. 89. 11.25 745FFB12 7 x 45 M12 446. 663. 89. 11.25 75FFB1 7 x 5 M1 396. 594. 822. 12.5 75FFB12 7 x 5 M12 396. 594. 822. 12.5 7525FFB12 75 x 25 M12 9. 1365. 188. 6.25 754FFB12 75 x 4 M12 545. 98. 1337. 1. 755FFB12 75 x 5 M12 55. 752. 14. 12.5 7555FFB12 75 x 55 M12 435. 653. 9. 13.75 84FFB14 8 x 4 M14 743. 119. 1535. 1. 88FFB14 8 x 8 M14 416. 614. 842. 2. 3FFB16 x 3 M16 1821. 3648. 492. 7.5 4FFB16 x 4 M16 1633. 2425. 3316. 1. 5FFB16 x 5 M16 1386. 264. 285. 12.5 55FFB16 x 55 M16 1277. 193. 2624. 13.75 6FFB16 x 6 M16 1139. 1683. 2322. 15. FFB16 x M16 644. 955. 1317. 25. DATA SHEET FFB 211. Max compression load in Kg deflection in. AV INDUSTRIAL PRODUCTS Telephone: +44 ()116 2461 261 Fax: +44 ()116 2768 934 Email: mail@avindustrialproducts.co.uk Website: www.avindustrialproducts.co.uk 9

Male - Conical Buffers Male Conical Buffers are ideal for absorbing shock. Giving high levels of deformation under impact / load, and provide a progressive stiffness rate to absorb energy and protect equipment. Stainless Steel metals and Oil Resistant / High Temperature rubbers available on request. Applications include - Primary & secondary suspension for vehicles, bump stops for general industrial machinery, assister springs PART D x H V x I 45 IRHD 6 IRHD 7 IRHD 11MCB12 1 x 1 M5 x 12 - - - - 215MCB1 2 x 15 M6 x 1 - - - - 224MCB18 2 x 24 M6 x 18 - - - - 2425MCB18 24 x 25 M6 x 18 35 51 71 6.25 2514MCB2 25 x 14 M8 x 2 35 5 7 3.5 2516MCB18 25 x 16 M6 x 18 - - - - 33MCB14 3 x 3 M6 x 14 37. 54. 74. 7.5 354MCB23 35 x 4 M8 x 23 - - - - 4535MCB23 45 x35 M8 x 23 96. 14. 193. 7.5 55MCB25 5 x 5 M1 x 25 117. 17. 233. 12.5 558MCB2 5 x 58 M8 x 2 147. 214. 293. 15. 561MCB28 5 x 61 M8 x 28 - - - - 564MCB35 5 x 64 M8 x 35 127. 185. 253. 16. PART D x H V x I 45 IRHD 6 IRHD 7 IRHD 567MCB33 5 x 67 M8 x 33 - - - - 568MCB38 5 x 68 M1 x 38 - - - - 64MCB62 6 x 4 M14 x 62 29. 35. 418. 1. 66MCB37 6 x 6 M12 x 37 195. 286. 395. 15. 758MCB32 7 x 58 M12 x 32 - - - - 76MCB35 7 x 6 M12 x 35 21. 36. 419. 14.5 7589MCB37 75 x 89 M12 x 37 - - - - 958MCB45 95 x 8 M16 x 45 47. 594. 814. 2. 95MCB31 x 95 M12 x 31 225. 45. 68. 24. MCB31 x M12 x 31 22. 44. 66. 23. 12MCB31 x 12 M12 x 31 21. 42. 63. 3. 11877MCB41 118 x 77 M16 x 41 - - - - 346MCB 7 x 46 M12 x 3 178. 26. 356. 11.5 PART NO. D H G L 1514MRF4 15 14 M4 13 224MRF6 2 24 M6 18 2519MRF6 25 19 M6 18 428MRF8 4 28 M8 1 528MRF1 5 28 M1 33 743MRF1 7 43 M1 28 7537MRF12 75 37 M12 37 PART NO. D1 D2 d H 4223TRB18 42 4 18 23 6233TRB21 62 6 21 33 7233TRB21 72 7 21 33 824TRB25 82 8 25 4 1254TRB32 12 32 54 12246TRB38 122 12 38 46 PART NO. D H d1 d2 s 316PRB9 3 16 16 9 3 416PRB9 4 16 16 9 3 42PRB9 4 2 17 9 3 516PRB11 5 16 2 11 3 52PRB11 5 2 22 11 3 62PRB11 6 2 25 11 4 7525PRB13 75 25 3 13 6 82PRB13 8 2 32 13 4 25PRB13 25 4 13 6 3PRB33 3 6 33 6 12525PRB17 125 25 5 17 6 PART NO. D H G h 1212MCBT1 12 12 M4 1 146MCBT4 14 6 M4 4 2512MCBT18 25 12 M6 18 2514MCBT1 25 14 M4 1 2517MCBT18 25 17 M6 18 4521MCBT46 45 21 M8 46 518MCBT28 5 18 M1 28 52MCBT28 5 2 M1 28 55MCBT28 5 5 M1 28 827MCBT37 8 27 M12 37 12545MCBT45 125 45 M16 45 PART NO. A B C G H 3835MFBT27 38 3 35 M1 27 4335MFBT27 43 3 35 M1 27 435MFBT25 43 3 5 M1 25 PART NO. D H G h 2417MCB2 24 17 M8 2 2516MCB2 25 16 M8 2 424MCB28 4 24 M8 28 528MCB28 5 28 M8 28 545MCB35 5 45 M1 35 645MCB28 6 45 M1 28 8565MCB37 85 65 M12 37 DATA SHEET MCB 211. Max compression load in Kg deflection in. 1 AV INDUSTRIAL PRODUCTS Telephone: +44 ()116 2461 261 Fax: +44 ()116 2768 934 Email: mail@avindustrialproducts.co.uk Website: www.avindustrialproducts.co.uk

Plate Buffers Flat Buffers are a low cost solution to absorbing shock & vibration. They are used in compression, and are available with various mounting configurations. Additional Sizes are available, Plus Stainless Steel metals and Oil Resistant / High Temperature rubbers available on request. Applications include - General purpose mountings used in a wide variety of applications, including Construction, Agricultural, Coercial Vehicle & General Industrial Machinery. PART A B C D E F G Max Kg PB335 84. 32. 19 46 6.9 68.6 3.2 75. PB238 121. 57. 56 86 8.6 15. 6.3 4. PB15 15. 6. 5 9 1. 125. 6. 3. PB26 156. 64. 36 88 13.5 127. 5. 24. Square Plate Buffers PART a1 a2 D d H s1 Max Kg PB5 5 4 4 5,5 32 2 153 PB63 63 5 5 6,5 4 3 244 PB8 8 63 63 6,5 5 4 382 PB 8 8 9 63 5 611 PB125 125 9 8 6 968 PB16 16 125 125 11 6 1529 PB 16 16 11 125 8 2446 PB25 25 13 16 8 3822 Truck Buffers PART NO. H L B HOLES A D1 D2 BS-1 15 125 4 2 6 19.7 8 BS-2 4 125 4 2 6 19.8 8 BS-3 5 125 43 2 6 2.3 8 BS-4 7 125 43 2 6 19.8 8 BS-5 6 52 2 12 26 1.5 BS-6 8 52 2 12 26 1.5 BS-7 6 3 52 3 115 26 1.5 BS-8 8 3 52 3 115 26 1.5 BS-9 6 4 52 3 165 26 1.5 BS-1 8 4 52 3 165 26 1.5 BS-11 35 53 6 4 157 26 12.5 DATA SHEET PB/SPB/TB 211. Max compression load in Kg deflection in. AV INDUSTRIAL PRODUCTS Telephone: +44 ()116 2461 261 Fax: +44 ()116 2768 934 Email: mail@avindustrialproducts.co.uk Website: www.avindustrialproducts.co.uk 11

Low Frequency Mounts Low Frequency Mounts are designed to provide high deflections under light loads, providing low natural frequency and high levels of isolation Both Active & Passive Applications include - Precision equipment, instruments, lightweight equipment, and medical equipment. PART A B C D E LF1395 19.3 29.6 16. M5 25.5 LF1396 25.5 38.2 16. M6* 34.8 *Alternative M1 PART A B C D E LF912 12.5 9.5 9.4 M4 1. LF1394 17 14. 15. M4 8. Plate and Pedestal Mounting Plate & Pedestal Mountings offering high deflections under light loads, ideal for light weight equipment. Available in both Plate & Pedestal type depending on preferred mounting method. Can be made failsafe by fitting top & bottom washers Applications include - Lightweight equipment such as fans, HVAC, compressors. PART A B C D E F G H J K M N P PL18 31.75 25.4 25.4 4.2 3.6 6.7.8 1.3 - - - - - PL181 44.5 34.9 38.1 6.5 4.2 8.9 1.3 15.9 - - - - - PL182 57.2 44.5 5.8 9.9 5. 13.5 1.5 25.4 - - - - - PE183 - - 25.4 4.2 - - - 1.3 42.9 34.9 3.6.6 19.8 PE184 - - 38.1 6.5 - - - 15.9 6.3 49.2 5..8 28.6 PE185 - - 5.8 9.9 - - - 25.4 76. 63.5 6.5.94 39.7 PART DEFLECTION AT MAXIMUM LOAD PLATE PEDESTAL MAXIMUM LOAD PL18-45 PE183-45.91 1.6 PL18-6 PE183-6 1.8 1.6 PL181-45 PE184-45 2.7 2.5 PL181-6 PE184-6 5.4 2.5 PL181-7 PE184-7 8.2 2.5 PL182-45 PE185-45 14 3 PL182-6 PE185-6 23 3 PL182-7 PE185-7 4 3 DATA SHEET LFM/PPM 211. Max compression load in Kg deflection in. 12 AV INDUSTRIAL PRODUCTS Telephone: +44 ()116 2461 261 Fax: +44 ()116 2768 934 Email: mail@avindustrialproducts.co.uk Website: www.avindustrialproducts.co.uk

UU Shear Mounting UU Shear Mountings are designed to load the rubber in shear and thereby provide a soft vertical spring rate. Applications include:- small generators,fans & low speed machines. They are equally suitable for the protection of instruments & apparatus from surrounding shock vibration. PART NUMBER A B C D E F G & H UU1492-4 61 2 43 25 27 2 6.6 14 8. UU1492-5 17 7. UU1482-4 6 5 43 19 3 17 1 43 8. UU1482-5 5 7.5 UU1481-4 7 25 62 37 43 25 1 17 8. UU1481-5 25 7. UU1481-6 28 4.5 UU148-4 8 5 78 5 55 3 13 72 8. UU148-5 92 7. UU148-6 95 4.5 UU1479-4 86 64 18 76 82 38 16 152 8. UU1479-5 17 6. UU1479-6 25 4. Max compression load in Kg deflection in. Kg Angle Mounting Angle Mountings are used in pairs - diametrically opposite to give a low roller frequency and hence improved isolation whilst maintaining good stability of the equipment. Applications include:-small portable generator sets & pumps. PART NUMBER A B D C 1 C 2 e a F G AM47 47 17 M8 35 15 3 4 o 29 23. AM54 54 19 M8 35 15 3 4 o 37 31. PART NUMBER 45 SHORE 6 SHORE LOAD Kg Deflection LOAD Kg Deflection AM47 5 5 15 5 AM54 4 9 9 9 DATA SHEET UUSM/AM 211. Max compression load in Kg deflection in. AV INDUSTRIAL PRODUCTS Telephone: +44 ()116 2461 261 Fax: +44 ()116 2768 934 Email: mail@avindustrialproducts.co.uk Website: www.avindustrialproducts.co.uk 13

T-Bush Installation T Bushes offer a low cost solution for isolating vibration, reducing structure borne noise & absorbing shock forces for both mobile & static applications. Using overload & rebound washers they provide a fail safe mounting system. The mounting also has the benefit of being low profile. Applications Include: Engines, Cabs, Pumps, Fuel Tanks, Radiators, Compressors & Industrial Equipment etc. PART A B C D F Kg TB25 27 17.5 1 2 6 5.7 TB45 43 25 13 31 1 1.2 TB5 49 35 13 34 13 1.6 TB6 63 3 16 41 15 25 2 TB65 63 44 16 41 15 25 2 TB75 75.5 5.8 16.3 5.3 2.6 34 2.16 TBCBA2 5.8 36.8 13.5 35.1 19.1 181 2.5 TBCBA24 59.7 38.1 16 38.1 17.5 295 2.5 TBCBA28 71.1 41.4 2 41.1 17.5 476 2.5 TBCBA33 83.8 49.3 2 41.1 22.4 725 3 Groet Mount Groet Mounts are a low cost product normally used as a fastening method, and also to isolate high frequency vibrations. Applications Include: Vehicle & Motorcycle body panels / Fairings, Light weight equipment, electronics etc. Installation PART NO. D K L H G GM9 7.2 9 9 2.5 M3 GM12 9.3 12 11.5 3 M4 GM15 1.2 15 14.5 3.5 M5 GM18 12.7 18 17 4 M6 GM24 16.5 24 22 5 M8 Two-Piece Mounting SECTION A-A Two Piece Mountings are an ideal product for both mobile & static applications for reducing vibration, and allowing flexibility within a system, and are used for reducing stresses on brackets etc. Using washers ensures a failsafe mounting system arrangement. Applications Include: Construction Equipment, Power Generation, Military Vehicles, Off Road & Agricultural, Industrial Machinery & Equipment. PART A B C D E F G R Tmax Tmin TP335 12.3 2.1 1.3 9.3 12.3 1.3 33 1. 9.5 9.5 TP485 2 31 19 1 2 13.5 47.5 1.5 14 12.5 TP223 22.5 39.5 24 15 23 16.5 64 2.5 22 19 TP975 25 58.4 26.5 22 25 24.1 89 3. 28.6 25.4 DATA SHEET TB/1 GHM/1 TP/1 211. Max compression load in Kg deflection in. 14 AV INDUSTRIAL PRODUCTS Telephone: +44 ()116 2461 261 Fax: +44 ()116 2768 934 Email: mail@avindustrialproducts.co.uk Website: www.avindustrialproducts.co.uk

Suspended Mount Suspended Mounts are ideal for hanging or suspending equipment from walls, vertical surfaces, ceilings & supporting structures. The HNG Upper is used to accoodate Tensile Mounted Loads at the top fixing of the equipment, whilst the HNG Lower is used to accoodate the compressive loads at the bottom of the equipment. WALL Applications include:- instrument cabinets, control panels, HVAC equipment etc TYPE E K A H d N t G HNG-upper 75 114 96 33 9 15 2.5 M8 HNG-lower 75 114 96 33 9 15 2.5 M8 HNG UPPER HNG LOWER TYPE M-Max (KG) F-Max (KG) LOAD 4 Sh 6 Sh 4 Sh 6 Sh HNG-upper 14 25 3 7 HNG-lower 14 25 3 7 Cup Shock Mountings Cup shock mountings are a relatively stiff product, ideal for applications where high frequency vibrations are predominant. The product is failsafe and ideal for both mobile & static applications. The outer metal cap offers protection from contaminants such as Oil or Fuel. The design of the mounting also allows the product to be used in tension, although maximum loads should be derated. Applications include:- Military Equipment, Electronic Equipment, HVAC, Compressors, and Motors PART A B C D E F CSM 5 28 M8 5 6 6 CSM 76 38 M1 63.5 6.7 76 PART 45 SHORE 6 SHORE 75 SHORE Kg Kg Kg CSM 8 2. 1.5 15 1.5 CSM 18 2.5 24 2.5 3 2. DATA SHEET SM/CSM 211. Max compression load in Kg deflection in. AV INDUSTRIAL PRODUCTS Telephone: +44 ()116 2461 261 Fax: +44 ()116 2768 934 Email: mail@avindustrialproducts.co.uk Website: www.avindustrialproducts.co.uk 15

Captive Transit Mounts Captive Transit Mounts are designed with an integral overload stop which controls the movement of equipment during transit and provides a fully failsafe arrangement, suitable for both Mobile & Static Applications. A universal mounting, popular in a wide range of applications. Cost Effective, High Performing & Easy to Install. The rubber is used in shear compression providing optimum performance and offers vibration reduction of upto 95%. The metal top cap provides protection from contaminants such as Oil & Fuel. Load Rating 2Kg to 4Kg. Applications include:- Diesel Engines, Generator Sets, Pumps, Compressors, Vehicles, and Marine Engines, Construction Plant. PART A B P F x M CF G L S REF. CTM6335 63 35 M1 / M12 9 x 14 76-9 5 11 2.5 CTM6535 65 35 M12 15 x 11 45 12 3. CTM773 77 3 M1 / M12 9 ø 18-11 6 135 3. CTM8335 83 35 M1 / M12 11 ø 18-11 65 135 3. CTM9245 92 45 M12 1.5 ø 11 73 128 3. CTM9335 93 35 M1 / M12 1 ø 122-124 7 144 2.5 CTM1638 16 38 M12 / M16 12.5 x 19 138-146 8 171 3. CTM1642 16 42 M12 / M16 12.5 x 19 138-146 8 171 3. CTM185 18 5 M16 16.5 ø 16 83 19 5. CTM12142 121 42 M12 / M16 13.5 ø 156-158 92 19 3.3 CTM14448 155 48 M16 14 x 11 176-188 12 216 4. CTM14453 155 53 M16 14 x 11 176-188 12 216 4. DATA SHEET CTM1 211. Max compression load in Kg deflection in. 16 AV INDUSTRIAL PRODUCTS Telephone: +44 ()116 2461 261 Fax: +44 ()116 2768 934 Email: mail@avindustrialproducts.co.uk Website: www.avindustrialproducts.co.uk

CaptiveTransit Mounts CTM6335 25 15 5.5 1 1.5 2 2.5 3 3.5 4 Deflection in CTM773 35 3 6 25 15 45 5.5 1 1.5 2 2.5 3 3.5 4 Deflection in CTM9245 8 7 7 6 6 5 4 45 3.5 1 1.5 2 2.5 3 3.5 4 4.5 Deflection in DATA SHEET CTM2 211. Max compression load in Kg deflection in. 6 5 4 3 2 1 6 7 5 4 6 3 45.5 1 1.5 2 2.5 3 3.5 4 4.5 Deflection in 16 7 14 1 8 6 6 4 45.5 1 1.5 2 2.5 3 3.5 4 Deflection in 16 /3 14 1 8 /2 6 4 1 2 3 4 5 6 7 8 9 Deflection in CTM6535 14 12 6 8 6 5 4 4 2 1 2 3 4 5 Deflection in 18 6 16 14 5 12 8 6 4 4 2 1 2 3 4 5 6 7 Deflection in CTM9335 5 4 3 6 45.5 1 1.5 2 2.5 3 3.5 4 CTM1642 Deflection in 7 6 5 4 /4 /3 /2 3 /1 1 2 3 4 5 6 7 8 Deflection in CTM12142 8 6 6 4 45.5 1 1.5 2 2.5 3 3.5 4 4.5 5 Deflection in CTM14453 15 5 2 4 6 8 1 12 14 Deflection in /9 /8 /1 AV INDUSTRIAL PRODUCTS Telephone: +44 ()116 2461 261 Fax: +44 ()116 2768 934 Email: mail@avindustrialproducts.co.uk Website: www.avindustrialproducts.co.uk 17

Square Flange Captive Mounts PART A B P F CF L S REF. SFCM16 162 59 M2 14.5 14 17 4 SFCM18 18 66 M2 14.5 149-163 192 4 SFCM18HD 183 86 M2 14.5 146 18 5 SFCM22 22 15 M24 17.5 18 22 6 SFCM22HD 22 15 M24 17.5 18 22 6 SFCM16 16 14 1 6 6 5 8 6 4 4 4 3 2 1 2 4 6 8 1 Deflection in 35 3 25 7 6 5 6 4 15 4 3 2 5 1 1 2 3 4 5 6 7 8 9 1 Deflection in 18 16 14 1 8 6 4 6 4 1 12 14 16 Deflection in SFCM22 6 6 5 7 4 3 6 5 4 4 3 2 1 3 6 9 12 Deflection in 45 4 35 3 25 15 5 6 5 6 4 3 45 2 1 2 4 6 8 1 12 14 16 18 2 Deflection in 75 DATA SHEET SFCM 211. Max compression load in Kg deflection in. 18 AV INDUSTRIAL PRODUCTS Telephone: +44 ()116 2461 261 Fax: +44 ()116 2768 934 Email: mail@avindustrialproducts.co.uk Website: www.avindustrialproducts.co.uk

Small Captive Transit Mounts Captive Transit Mounts are designed with an integral overload stop which controls the movement of equipment during transit and provides a fully failsafe arrangement, suitable for both Mobile & Static Applications. A universal mounting, popular in a wide range of applications. Cost Effective, High Performing & Easy to Install. The rubber is used in shear compression providing optimum performance and offers vibration reduction of upto 95%. The metal top cap provides protection from contaminants such as Oil & Fuel. Load Rating 2Kg to 4Kg. Applications include:- Diesel Engines, Generator Sets, Pumps, Compressors, Vehicles, and Marine Engines, Construction Plant. PART A B P F x M CF G L S REF. CTM6335 63 35 M1 / M12 9 x 14 76-9 5 11 2.5 CTM-R 64 34 M12 9.5 76 47 93 2.5 CTM6335 25 6 5 15 5 4 3 2 1.5 1 1.5 2 2.5 3 3.5 4 Deflection in CTM-R 14 12 8 R R2 R3 6 4 2.5 1 1.5 2 2.5 3 3.5 4 4.5 Deflection in Machine Support Machine Supports are an ideal product for static machinery. Low Cost and easy to install. Providing isolation levels of upto 85% Applications include:- Diesel Engines, Static Generating Sets, and Heavy Industrial Machinery. PART A B P F (x M) CF G L S MS18516 18 5 M16 16.5 16 83 19 5 16 14 1 8 6 4 6 5 4 3 2 1 7 6 45.5 1 1.5 2 2.5 3 3.5 4 Deflection in WITHOUT STOPS DATA SHEET SCTM/MS 211. Max compression load in Kg deflection in. AV INDUSTRIAL PRODUCTS Telephone: +44 ()116 2461 261 Fax: +44 ()116 2768 934 Email: mail@avindustrialproducts.co.uk Website: www.avindustrialproducts.co.uk 19

Silent Marine Silent Marine Mountings were originally designed for use with marine propulsion engines and therefore are failsafe and can accoodate thrust. Nowdays Silent Marine is popular throughout a wide range of industries. Offering a High Performance, Easy Installation & cost effective solution to reducing vibration. The mountings provides different stiffness in each direction, which provides optimum performance, particularly for I.C. Engines Products can also be supplied with Lloyds Approval. Applications include:- Marine Propulsion engines, Generating Sets, Diesel Engines, Vehicles, Pumps, and Compressors. HEIGHT ADJUSTER STUDS AVAILABLE - SEE DATA SHEET HA211 PART A B C D F M G J SM16 12 38.5 6 11 M12 14 11 SM169 183 5 75 14 13 M16 3 2 SM1657 228 74 114 182 18 M2 35 25 SM 16 8 6 4 2 55 45 4 5 4 3 2 1 1 2 3 4 5 6 Deflection in 65 6 SM 169 4 3 756 655 4 55 3 45 2 35 1 1 2 3 4 5 6 Deflection in SM 1657 8 6 4 65 5 554 453 2 1 1 2 3 4 5 6 7 Deflection in 75 6 DATA SHEET SM 211. Max compression load in Kg deflection in. 2 AV INDUSTRIAL PRODUCTS Telephone: +44 ()116 2461 261 Fax: +44 ()116 2768 934 Email: mail@avindustrialproducts.co.uk Website: www.avindustrialproducts.co.uk

Square Flange Silent Marine SM18 M16 1 75 73 8 65 13 6 4 55 45 22 188 1 2 3 4 5 6 7 Deflection in 112 33 SM1841 3375 3 7 2625 225 6 1875 15 1125 75 375 5 4 22 M24 2 4 6 8 1 Deflection in 112 HEIGHT ADJUSTER STUDS AVAILABLE - SEE DATA SHEET HA211 56 95 22 19 135 27 33 DATA SHEET SFSM/1 211. Max compression load in Kg deflection in. AV INDUSTRIAL PRODUCTS Telephone: +44 ()116 2461 261 Fax: +44 ()116 2768 934 Email: mail@avindustrialproducts.co.uk Website: www.avindustrialproducts.co.uk 21

Height Adjusters HA16A-1 HA1657B-1 HA16A-1 HA16B-3B HA169-3B HA1657B-1 HA1657C-1 DATA SHEET HA 211. Max compression load in Kg deflection in. 22 AV INDUSTRIAL PRODUCTS Telephone: +44 ()116 2461 261 Fax: +44 ()116 2768 934 Email: mail@avindustrialproducts.co.uk Website: www.avindustrialproducts.co.uk

Cast Foot Mounts Cast Foot Mountings are the ideal choice for large reciprocating machinery & heavy duty industrial equipment. Using the rubber in Shear/Compression, they can accoodate high loads and provide excellent vibration reduction properties of upto 98%. The strong construction of the mounting ensures a safe, reliable product with extended service life and very high performance. Mountings can also be supplied with fail-safe stop for mobile applications. Applications include:- Diesel Engines, Generator Sets, Compressors, Fans, Pumps, and Industrial Machinery PART A B C D E F G H CFM29M16 132 82 13 M16 122 114 9 71.5 4 3 1 2 3 4 1 2 3 4 5 6 7 Deflection in PART A B C D E F G H CFM213 24 146 18 M16 23 25 165 11 CFM346 24 146 18 M16 23 25 165 12 For free standing installations rubber base pads can be supplied to order. CFM213 16 1 8 1 2 3 4 4 1 2 3 4 5 6 7 8 9 Deflection in 25 CFM346 15 7 6 55 5 45 35 2 4 6 8 1 12 14 16 Deflection in DATA SHEET CFM 1/2 211. Max compression load in Kg deflection in. AV INDUSTRIAL PRODUCTS Telephone: +44 ()116 2461 261 Fax: +44 ()116 2768 934 Email: mail@avindustrialproducts.co.uk Website: www.avindustrialproducts.co.uk 23

Flanged Circular Mounting Flanged Circular Mountings are a simple, low cost, compression mounting and provide good levels of vibration reduction. The mountings are produced with & without an interleaf metal. The interleaf metal provides increased load capacity. Applications include:- Generating Sets, Pumps, Fans, Compressors, Vibratory Screens, and Processing Equipment etc. PART A B C E G H 6 SHORE LOAD DEF. FCM2 75. 5. M12*. 12.5 127. 25 Kg 5 FCM2I 75. 5. M12*. 12.5 127. 5 Kg 5 FCM3 81. 5. M12* 112. 12.5 14. 4Kg 5 FCM3I 81. 5. M12* 112. 12.5 14. 75Kg 5 FCM5 125. 64. M2 176-184 18 x 23 22. 1Kg 5 FCM5I 125. 64. M2 176-184 18 x 23 22. Kg 4 Note: * Mounting can be supplied with stud I Denotes with Interleaf PART A B C D F CF L1 L2 P S FCM763812 76. 39. 14. 25. 28. 99-128 165. 83. M12 3. 6 5 7 4 3 6 45 1 2 3 4 5 6 Deflection in DATA SHEET FCM 211. Max compression load in Kg deflection in. 24 AV INDUSTRIAL PRODUCTS Telephone: +44 ()116 2461 261 Fax: +44 ()116 2768 934 Email: mail@avindustrialproducts.co.uk Website: www.avindustrialproducts.co.uk

Flanged Mounting Flanged Mountings give high levels of deflection, providing excellent levels of vibration reduction and shock absorption both in vertical & horizontal planes. Low cost & easy to install. Stainless Steel metals and Oil Resistant / High Temperature rubbers available on request. Applications include:- Pumps, Fans, Compressors, Vibratory Screens, and Processing Equipment etc. PART NUMBER Fixing holes A B C D E F G FM1566 2 26.5 11.6 M6 5 6 1.74 6 FM29 2 31 21.5 M8/M1 6 77 3 9.2 FM7 2 18 2 M6 5 64 2 7 FM25 2 33 25 M8/M1 66-73 85 2 8 x 12 FM5 2 45 35 M1 92 114 2 1 FM 2 53 4 M1 11 136 2 11.5 FM 2 58 45 M1 124 151 3 11.5 FM4 4 7 63 M12 12 15 3 14.5 FM6 4 85 M16 16 4 14.5 FM15 4 186 16 M24 25 31 6 18 PART NUMBER 4 SHORE 6 SHORE 75 SHORE Kg Kg Kg FM1566 1 1.4 2 1.35 23 1.1 FM29 4 3. 76 2.8 112 2.5 FM7 3.5 3. 9 3. 13 2.7 FM25 2 4.5 4 4.5 57 4. FM5 38 5. 69 4.8 11 4.5 FM 6 7. 6.5 147 6. FM 13 1. 22 9. 32 8.5 FM4 27 14.5 54 13. 793 9.5 FM6 375 17. 75 15.5 113 12. FM15 115 46. 23 41.5 3381 37. PART NUMBER A B C D E F G H FM42 4 2 M6 19 29 52 64 8.5 FM624 6 24 M6 14 34 76 9 8.5 FM827 8 27 M8 25 65 12 8.2 FM28 28 M1 22 7 124 148 1. FM1539 15 39 M14 34 115 182 214 12. FM44 44 M18 35 14 24 28 15 PART NUMBER 45 SHORE 6 SHORE 75 SHORE Kg Kg Kg FM42 4 2 1 2.5 17 2.5 FM624 15 3 25 3 45 3 FM827 75 7 11 6 15 4 FM28 9 4 16 4 22 4 FM1539 13 7 25 7 35 6 FM44 5 7 825 7 125 6 DATA SHEET FM 211. Max compression load in Kg deflection in. AV INDUSTRIAL PRODUCTS Telephone: +44 ()116 2461 261 Fax: +44 ()116 2768 934 Email: mail@avindustrialproducts.co.uk Website: www.avindustrialproducts.co.uk 25

Cone Mounting Cab & Cone Mountings are a robust product offering a high horizontal stiffness compared to its vertical stiffness in order to control the movement of Engines & Equipment. They are ideal for mobile applications, and are able to accoodate high loads & shock forces whilst offering excellent vibration isolation properties. Cut outs in the rubber section allow for different horizontal to vertical stiffness ratios and the mountings can be supplied with Bump & Rebound washers to provide a failsafe mounting solution. The design of the mountings ensures a low profile installation. Applications Include: Off Road Vehicle Engines, Cabs, Rail Applications, and Mobile Applications, Transmission & Gear Box Suspension. PART TYPE A B CF D1 D2 F1 F2 x F3 L1 L2 S1 S2 CM651/12 A 6 45 78-84 54 54 12 11 x 14 16 68 2.5 3. CM651/16 A 6 45 78-84 54 54 16 11 x 14 16 68 2.5 3. CM651/12 B 6 45 78-84 54 54 12 11 x 14 16 68 2.5 3. CM651/16 B 6 45 78-84 54 54 16 11 x 14 16 68 2.5 3. Type A Type B Slotted Rubber 25 25 7 6 7 15 45 15 6 45 5 5 1 2 3 4 5 6 Deflection in.5 1 1.5 2 2.5 3 3.5 4 4.5 5 5.5 Deflection in DATA SHEET COM 211. Max compression load in Kg deflection in. 26 AV INDUSTRIAL PRODUCTS Telephone: +44 ()116 2461 261 Fax: +44 ()116 2768 934 Email: mail@avindustrialproducts.co.uk Website: www.avindustrialproducts.co.uk

Cone Mounting PART NUMBER 6 A B C D E F CM566 84 63.5 74.6 16.2 38 3.7 26.2 15 92 82.7 69.4 - - - CM482 84 63.5 74.6 16.2 38 3.7 26.2 - - - - 14 114.3 89 G H J K L M N P 5 7 4 6 3 5 45.5 1 1.5 2 2.5 3 3.5 4 4.5 5 5.5 6 6.5 7 Deflection in CM566 CM482 PART NUMBER A B C D E F CM391 84 7.6 74.6 16.2 38 7 33.3 15 92 82.7 69.4 - - - CM132 84 7.6 74.6 16.2 38 7 33.3 - - - - 14 114.3 89 G H J K L M N P 7 6 7 5 6 4 3 5 45 1 2 3 4 5 6 7 8 Deflection in CM391 CM132 PART NUMBER A B C D E F G CM225 56 8 75 2.2 2.2 4 16 47 65 7 9 66 16 51. H J K L M N P 1 7 8 6 6 4 5 45.5 1 1.5 2 2.5 3 3.5 4 4.5 5 5.5 6 6.5 7 7.5 Deflection in DATA SHEET COM4 211. Max compression load in Kg deflection in. AV INDUSTRIAL PRODUCTS Telephone: +44 ()116 2461 261 Fax: +44 ()116 2768 934 Email: mail@avindustrialproducts.co.uk Website: www.avindustrialproducts.co.uk 27

Cone Mounting PART NUMBER A B C D E F CM379 52 27 49.3 1.1 22.4 2 7 - - 22.2 89 73 57.2 CM45 52 27 49.3 1.1 22.4 2 7 57.2 44.5 22.2 - - - G H J K M N P 125 7 75 6 5 25 45.5 1 1.5 2 2.5 3 3.5 4 4.5 CM45 CM379 Deflection in PART NUMBER A B C D E F CM341 34 55.5 74.6 16.2 31.7 3.6 18 15 92 82.7 69.4 - - - CM285 34 55.5 74.6 16.2 31.7 3.6 18 - - - - 14 114.3 89 G H J K L M N P 5 7 4 3 6 5 45 1 2 3 4 5 6 7 8 Deflection in CM341 PART NUMBER A B C D E F G CM277X 34 55.5 74.6 16.2 31.7 3.6 18 15 92 82.7 69.4 CM276X 34 55.5 74.6 16.2 31.7 3.6 18 14 114.3 89 CM311Y 34 55.5 74.6 16.2 31.7 3.6 18 15 92 82.7 69.4 CM31Y 34 55.5 74.6 16.2 31.7 3.6 18 14 114.3 89 H J K L M N P 3 7 25 6 5 15 45 5.5 1 1.5 2 2.5 3 3.5 4 4.5 5 5.5 6 6.5 7 7.5 Deflection in CM277X CM311Y DATA SHEET COM3 211. Max compression load in Kg deflection in. CM276X CM31Y 28 AV INDUSTRIAL PRODUCTS Telephone: +44 ()116 2461 261 Fax: +44 ()116 2768 934 Email: mail@avindustrialproducts.co.uk Website: www.avindustrialproducts.co.uk

Cone Mounting PART NUMBER A B C D E F CM146 16 128.5 95 24.5 43 6 73 6 77 7 15 123 95-112 G H J K L M N P 225 175 15 125 75 5 25 7 6 5 45.5 1 1.5 2 2.5 3 3.5 4 4.5 5 5.5 6 6.5 7 Deflection in 3 25 6 15 45 5 1 2 3 4 5 6 7 8 Deflection in CM3/2 CM3/1 DATA SHEET COM2 211. Max compression load in Kg deflection in. AV INDUSTRIAL PRODUCTS Telephone: +44 ()116 2461 261 Fax: +44 ()116 2768 934 Email: mail@avindustrialproducts.co.uk Website: www.avindustrialproducts.co.uk 29

Cab Mounting PART NO. A B C D E F 45 IRHD (Kg) 6 IRHD (Kg) MIN MAX MIN MAX CB165/1 (SLEEVED) 15 75 46 16.2 22 17 3 5 CB165 (UNSLEEVED) 15 75 46 21 22 17 3 5 CB1814 12 89 47 25 21 23 15 428 25 713 PART NO. G H MIN H MAX I MIN CB165 & CB165/1 2 75.25 75.75 15 CB1814 25 89.25 89.75 12 Multi-Directional Mounting Multi-Directional mountings are used to accoodate vertical forces in both the upwards & downwards direction (i.e. positive & negative forces), and are ideal for applications such as Gearbox mountings where the torque applied during forward & reverse situations needs to be accoodated. Mountings should be used with Top & Bottom overload washers to provide a failsafe mounting arrangement. PART NUMBER A B C D CM89 68.2 54.2 78.8 6.6 16 12 19.7 1.4 9 69.8 E F G H J L DATA SHEET CAM 211. Max compression load in Kg deflection in. 3 AV INDUSTRIAL PRODUCTS Telephone: +44 ()116 2461 261 Fax: +44 ()116 2768 934 Email: mail@avindustrialproducts.co.uk Website: www.avindustrialproducts.co.uk

AV Hydro Mounting The AV Hydro Mounting combines a load bearing rubber spring element (k) with the high damping characteristics of viscous damping achieved by a hydraulic pot and plunger (d). The arrangement allows a soft mounting system to give good isolation, whilst high amplitude - Shaking - is controlled at lower speeds - Tick-Over. It is particularly suitable for variable speed engines; preventing druing of large unsupported panels; 1, 2 & 3 cylinder engines and where large movements & out-of-balance forces need to be absorbed. Applications Include: Variable speed vehicles, Tractors, Cropsprayers, Fork trucks, Small Marine engines, 1, 2 & 3 Cylinder engines. PART A B C D E F G H I Kg HYDV6 126 15 M1 11 64 89 32 45 2.5 15 8.5 HYDV6/1 14 116 M1 11 64 89 32 45 2.5 - - HYDV15 126 15 M12 11 64 13 46 6 2.5 25 8.5 HYDV15-75 126 15 M12 11 64 13 46 6 2.5 4 8.5 HYDV15/1 14 116 M12 11 64 13 46 6 2.5 - - HYDV175 175 138 M16 13 18.5 117 55 8 8 - - Max, Deflection in DATA SHEET AVHM 211. Max compression load in Kg deflection in. AV INDUSTRIAL PRODUCTS Telephone: +44 ()116 2461 261 Fax: +44 ()116 2768 934 Email: mail@avindustrialproducts.co.uk Website: www.avindustrialproducts.co.uk 31

Rectangular Sandwich Mounts Sandwich Mounts can be loaded in compression, shear or a combination of both by fitting at an angle. Applications include:- engine mountings, generator sets, heavy plant & machinery. RSM46 PART NUMBER A B C D E F G Kg RSM46-45 95 2.8 RSM46-5 135 2.8 9 4 36 54 74.5 6.8 3.5 RSM46-6 2.8 RSM46-7 31 2.8 RSM322-45 19 3. RSM322-6 11 57 43 64 89 11 5 375 3. RSM322-7 5 2.6 RSM284-45 3 3. RSM284-6 127 57 43 84 18 11 5 6 3. RSM284-7 8 2.6 RSM242-45 45 3. RSM242-6 168 57 43 127 146 11 5 85 2.8 RSM242-7 2.2 RSM3242-45 18 2.1 RSM3242-6 166 55 31 119 146 11 5 36 2.1 RSM3242-7 53 2.1 DATA SHEET RSM 211. Max compression load in Kg deflection in. 32 AV INDUSTRIAL PRODUCTS Telephone: +44 ()116 2461 261 Fax: +44 ()116 2768 934 Email: mail@avindustrialproducts.co.uk Website: www.avindustrialproducts.co.uk

Rail Mounting Rail Mounts can be loaded in compression, shear or a combination of both by fitting at an angle. Applications include:- engine mountings, generator sets, heavy plant & machinery. TYPE 1 (BOTTOM METAL ONLY) TYPE 2 (TOP & BOTTOM METALS) RAIL MOUNTINGS CAN BE SUPPLIED UPTO 2MTR S IN LENGTH PART B H S 5 1 15 RM23 2 3 - - RM2525 25 25 RM253 25 3 RM32 3 2 RM33 3 3 RM42 4 2 RM43 4 3 RM44 4 4 RM53 5 3 RM54 5 4 RM55 5 5 RM56 5 6 RM57 5 7 RM62 6 2 RM63 6 3 RM64 6 4 RM65 6 5 RM66 6 6 RM67 6 7 RM68 6 8 RM73 7 3 RM74 7 4 RM75 7 5 RM76 7 6 RM77 7 7 RM78 7 8 PART. B H S 5 1 15 RM84 8 4 RM845 8 45 RM86 8 6 RM88 8 8 RM945 9 45 - RM4 4 - RM5 5 - RM6 6 - RM7 7 - RM8 8 - RM9 9 - RM - RM1245 12 45 - RM125 12 5 - RM126 12 6 - RM127 12 7 - RM128 12 8 - RM155 15 5 - RM156 15 6 - RM157 15 7 - RM158 15 8 - RM159 15 9 - RM15 15 - RM6 6 - RM8 8 - RM - DATA SHEET RM 211. Max compression load in Kg deflection in. AV INDUSTRIAL PRODUCTS Telephone: +44 ()116 2461 261 Fax: +44 ()116 2768 934 Email: mail@avindustrialproducts.co.uk Website: www.avindustrialproducts.co.uk 33

Adjustable Foot Mounts Anti-Vibration Levelling Feet are simple, low costs products suitable for most types of machinery. They allow machinery to be levelled, and also provide a degree of vibration & noise reduction. Other Sizes, Stainless Steel metals and Oil Resistant / High Temperature rubbers available on request. Applications Include: Machine Tools, Lathes, Presses, Heavy Industrial Equipment, Conveyors, Food Processing & Pharmaceutical equipment, Generator Sets. PART D H Ni G Load (dan) KA1 8 25 1 M1 15 KA2 15 4 12 M16 KA3 45 15 M2 3 KA5 12 35 12 M12 6 KA9 9 35 1 M12 4 PART D H G L Lh SW MFL-1 8 38-48 M12 75-65 8 MFL-2 12 43-55 M16 12 8-68 9 MFL-3 16 48-53 M2 17 125-11 12 DATA SHEET AFM 211. Max compression load in Kg deflection in. 34 AV INDUSTRIAL PRODUCTS Telephone: +44 ()116 2461 261 Fax: +44 ()116 2768 934 Email: mail@avindustrialproducts.co.uk Website: www.avindustrialproducts.co.uk

Levelling Foot Mounts Anti-Vibration Levelling Feet are simple, low costs products suitable for most types of machinery. They allow machinery to be levelled, and also provide a degree of vibration & noise reduction. Other Sizes, Stainless Steel metals and Oil Resistant / High Temperature rubbers available on request. Applications Include: Machine Tools, Lathes, Presses, Heavy Industrial Equipment, Conveyors, Food Processing & Pharmaceutical equipment, Generator Sets. Available in plated mild steel or stainless steel 4 15 3 *Available with various thread sizes & thread lengths PART A B C D MIN Kg MAX Kg HARFSV 4 23 M8 48 2 8 HARFSV 6 28 M1 81 6 12 HARFSV 7 32 M12 89 9 16 HARFSV1 85 32 M12 89 13 35 HARFSV2 4 M14 19 27 6 HARFSV3 12 5 M16 116 45 9 HARFSV4 14 55 M16 116 7 1 HARFSV5 16 6 M16 116 1 175 HARFSV6 18 7 M24 138 15 25 HARFSV7 21 75 M24 138 2 375 DATA SHEET HARFSV/1 211. Max compression load in Kg deflection in. AV INDUSTRIAL PRODUCTS Telephone: +44 ()116 2461 261 Fax: +44 ()116 2768 934 Email: mail@avindustrialproducts.co.uk Website: www.avindustrialproducts.co.uk 35

IOS Bushes IOS Bushes are used to allow torsional, radial & axial movements within a system, as well as offering vibration isolation properties. The rubber is pre-stressed to provide high durability under high dynamic loads. No lubrication is required and they are completely maintenance free. Eccentric & Void Bushes also available on request. Applications Include: Vehicle Suspension systems,pivots & Control Links, Mechanical Linkages, Cab Mounts, Engine Mounts, Off Road Vehicles, Agricultural Machinery, Construction, Military etc PART A B C D Rate Nm/Rad TORSION Deflection + - a IOS819283 8 19 28 3 IOS122242 1 22 24 2 IOS12222528 12 22 25 28 IOS125225 1 25 2 25 IOS12252428 12 25 24 28 IOS8.5262525 8.5 26 25 25 IOS127384 1 27 38 4 IOS146 12.7 28.6 25.4 28.6 3. 15.6 3481 1.76 IOS1231718 12. 3. 17. 18. IOS123364 12. 3. 36. 4. IOS238446 2. 38. 4. 46. IOS1823 2.7 38.18 34.9 41.3 IOS246266 2 4 62 66 IOS25444 25 4 4 4 IOS25433 25 4 3 3 IOS245663 2 45 6 63 IOS245446 2 45 4 46 IOS24559.562.5 2 45 59.5 62.5 IOS245647 2 45 64 7 IOS16454652 16. 45. 46. 52. IOS2463542 2. 46. 35. 42. 26. 14. 7391 6. IOS245647 24. 5. 64. 7. IOS35666 3. 5. 6. 66. IOS255334 25. 5. 3. 34. IOS255 25. 5. 65. 68. IOS255885 25. 5. 8. 85. IOS255445 25 5 4 45 IOS2557985 25 5 79 85 IOS15.555316 15.5 55 3 16 IOS989 28.57 57.15 85.73 88.9 57. 12. 22456 18.2 IOS36668 3. 6. 6. 68. IOS462442 4. 62. 4. 42. IOS36626571 36. 62. 65. 71. IOS3864888 38. 64. 8. 88. IOS36567 3. 65. 6. 7. IOS47112115 4 7. 112. 115. IOS1284-7 44.45 76.2 76.2 82.55 1354. 11. 2417 23.4 Rate N/ RADIAL Load kn DATA SHEET IB 211. Max compression load in Kg deflection in. 36 AV INDUSTRIAL PRODUCTS Telephone: +44 ()116 2461 261 Fax: +44 ()116 2768 934 Email: mail@avindustrialproducts.co.uk Website: www.avindustrialproducts.co.uk

Spherical Bushes Spheri Bushes are compact heavy duty flexible bearings, able to accoodate high loads and allow movement in both torsional and conical directions. No Lubrication is required and they are completely maintenance free. Applications Include: off road vehicles, construction equipment, Rail Applications, Suspension Control Links, A frame bushes. PART A B C D Pz (KN) SB1316 25.4 66.7 48. 54.2 34. SB2166 25.4 66.8 47.6 54.2 34. SB221 25.4 66.7 47.6 54. 34. SB216 28.6 9.5 7. 76.2 58. SB1285 38.1 14.8 76.2 82.6 8. SB222* 35 66.7 47.6 12. 34. Pz is the Max Radial Load * With Solid Pin Flange Bushes Flanged Bushes are a simple design using the rubber in shear. A relatively stiff mounting, able to accoodate high loads of upto 1Kg and is ideal for isolating medium to high frequency vibrations. The product has a high radial to axial stiffness ratio and is therefore ideal for controlling horizontal movement. Using rebound & control washers will provide a failsafe mounting system. Applications Include: Engines, Compressors, Vehicles, Radiators, Agricultural & Construction equipment. Fig 1 Fig 2 PART A B C D E F G Fig 45 SHORE 6 SHORE 75 SHORE Kg Kg Kg FB 36 28 12 11 8.1 26 12 2 2 1.5 3 1.2 4.8 FB2 48 51 24 18 12.5 38. 8 1 65 2.5 85 2 11 2 FB2 7 55 27 19 18.5 56. 1 1 3.5 15 3 18 2.5 FB21 7 7 39 19 18.5 56. 1 1 125 3.5 3 25 2.5 FB4 9 42 28 22.5 74 19 1 5 35 4.5 4 3.5 FB41 11 49 28 22.5 74 19 1 225 5 375 5 45 3.5 FB7s 165 98 36 46 6.2 119 22 1 45 6.5 8 5.5 3.5 FB7 165 14 66 46 6.2 119 22 1 45 6.5 9 5.5 1 3.5 DATA SHEET SB/FB 211. Max compression load in Kg deflection in. AV INDUSTRIAL PRODUCTS Telephone: +44 ()116 2461 261 Fax: +44 ()116 2768 934 Email: mail@avindustrialproducts.co.uk Website: www.avindustrialproducts.co.uk 37

Enclosed Spring Mounts Enclosed Spring Mountings are a high deflection mounting suitable for static applications. They consist of multiple steel coil springs enclosed in a steel cup. The mountings are supplied with an oil resistant antislip pad under the steel base. Supplied with top fixing bolt to allow for levelling after installation. They give a maximum deflection of 25 and upto 99% Vibration Isolation. High deflection (5) also available on request. Applications Include: air conditioning, Fans, Static Generator sets, Low Speed Equipment. PART A B C D E F G ESS 75 73 59 55 4 1 M8 ESM 15 79 12 15 1 M12 ESL 23 8 175 15 12 M12 NB: For normal working conditions it is recoended Mountings are loaded up to a maximum deflection of 2 ESS 14 12 8 125 75 6 5 4 2 25 2 1 5 1 15 2 25 3 Deflection in ESM 8 8 7 6 6 5 4 4 3 4 5 1 15 2 25 3 Deflection in ESL 18 15 1 8 6 3 175 15 125 8 6 4 5 1 15 2 25 3 Deflection in Enclosed Spring Mounts Fitting Instructions The mountings are suitable for static applications and incorporate a height adjusting device to allow the machine to be levelled during installation. Where possible mountings should be fitted on site, alternatively transit chocks should be fitted to the equipment during transportation. The height adjusting bolts should be removed and all mountings placed in their correct floor position. The machine is now lowered into position, ensuring correct alignment of mounting fixing holes with brackets. With lock nuts & washers fitted to the height adjusting bolts, they can now be screwed into the mounting fixing holes until resistance is encountered. The level of the machine can now be checked and if needed adjusted by screwing down the height adjusting bolts 1 or 2 turns at a time, in sequence at each mounting. When complete, lock nuts should be locked in position. If during run-up or run-down the movement of the machine is considered excessive, snubbing of the movement can be increased by screwing down the height adjusting bolts by equal amounts, 1 or 2 turns at a time, thereby raising the height of the mounting top cap which reduces the gap with the snubber ring. Mountings should not be raised above their maximum working height, if additional adjustment is required packing should be fitted to the top or to the bottom of the mounting. For the mountings to isolate efficiently it is important that all connections and services to the machine should be flexible. The maximum hole size in the mounting bracket should not be greater than 16 Dia. If the hole is larger a suitable packing washer should be fitted below the mounting bracket. For further information and advice please contact our technical department. DATA SHEET ES/1 211. Max compression load in Kg deflection in. 38 AV INDUSTRIAL PRODUCTS Telephone: +44 ()116 2461 261 Fax: +44 ()116 2768 934 Email: mail@avindustrialproducts.co.uk Website: www.avindustrialproducts.co.uk

1Kg 15Kg 25Kg 5Kg 75Kg Kg 25Kg 5Kg 75Kg Kg 125Kg 15Kg Kg 25Kg 35Kg 45Kg 55Kg AV INDUSTRIAL PRODUCTS Telephone: +44 ()116 2461 261 Fax: +44 ()116 2768 934 Email: mail@avindustrialproducts.co.uk Website: www.avindustrialproducts.co.uk 39

Turret Mounting Turret Mountings - Designed primarily for the HVAC industry, they are a low cost product, ideal for static applications. The rubber completely encapsulates the metal parts to avoid corrosion problems. Giving relatively high levels of deflection, they offer good levels of vibration reduction, even at low running speeds. Applications Include: HVAC, Fans, and Pumps etc. TYPE A B C D E F G H I TMS 8 54-6 45 9 12 32 5 41 M8 TMM 95 67-76 6 9 14 45 5 56 M1 TML 15 15-126 86 11 22.5 7 6 82 M12 PART NUMBER MAXIMUM LOAD Kg MAXIMUM DEFLECTION NOMINAL HARDNESS COLOUR CODE TMS835 35 8 45 YELLOW TMS865 65 8 55 BLUE TMS8 8 65 RED TMM113 13 1 45 YELLOW TMM1225 225 1 55 BLUE TMM135 35 1 65 RED TML1185 185 1 45 YELLOW TML132 32 1 55 BLUE TML15 5 1 65 RED DATA SHEET TM 211. Max compression load in Kg deflection in. 4 AV INDUSTRIAL PRODUCTS Telephone: +44 ()116 2461 261 Fax: +44 ()116 2768 934 Email: mail@avindustrialproducts.co.uk Website: www.avindustrialproducts.co.uk

Rubber Hangers Hangers are available in 2 types. Rubber hangers and Steel coil spring hangers. Rubber Hangers are extremely cost effective, whilst steel coil spring hangers offer high performance. Applications Include: HVAC, Ducting & Pipework, Exhausts systems etc. PART TVAR 4 TVAR 6 TVAR 75 Spring Hangers PART B F H A D C Max Deflection Max Static Kg TM 25 75 55 12 3 11 24 25 TM 5 75 55 12 3 11 24 5 TM 75 75 55 12 3 11 24 75 TM 75 55 12 3 11 24 TM 15 12 75 155 16 16 14 35 15 TM 25 12 75 155 16 16 14 35 25 TM 35 12 75 155 16 16 14 35 35 DATA SHEET RH / SH 211. Max compression load in Kg deflection in. AV INDUSTRIAL PRODUCTS Telephone: +44 ()116 2461 261 Fax: +44 ()116 2768 934 Email: mail@avindustrialproducts.co.uk Website: www.avindustrialproducts.co.uk 41

Hollow Rubber Spring Hollow Rubber Springs are an ideal product to reduce the effects of shock & vibration. They give high levels of deflection allowing shock forces to be absorbed to a high degree, and have progressive stiffness characteristics, meaning they can accoodate high loads. Applications include:- Vehicle suspension systems (both primary & secondary), trailers, construction equipment, agricultural equipment and shock / vibration mountings for military equipment. F (KN) HRS5556 HRS13B HRS1412 HRS5555 HRS13B HRS1412 4 Compression 3 2 1 F (KN) Compression 15 5 F (KN) Compression 4 3 2 1 1 2 3 4 2 4 6 8 2 4 6 8 F (KN) HRS1525 HRS1525 HRS5556 15 5 Compression 2 4 6 8 F (KN) 4 3 2 1 HRS15515 HRS15515 Compression 2 4 6 8 DATA SHEET HRS 211. Other sizes available on request. AV INDUSTRIAL PRODUCTS, 89 Scraptoft Lane, Leicester, LE5 2FE Telephone: 116 2461 261 Fax: 116 2768 934 Email: mail@avindustrialproducts.co.uk 42 AV INDUSTRIAL PRODUCTS Telephone: +44 ()116 2461 261 Fax: +44 ()116 2768 934 Email: mail@avindustrialproducts.co.uk Website: www.avindustrialproducts.co.uk

Hollow Rubber Spring HRS53 HRS9125 HRS9696 HRS13 F (KN) 25 2 15 1 Compression F (KN) 8 6 4 Compression F (KN) 2 15 1 Compression F (KN) 2 15 1 Compression 5 2 5 5 2 4 6 8 2 4 6 8 2 4 6 8 2 4 6 8 HRS11133 Compression 4 3 Compression 2 15 4 3 Compression F (KN) 2 F (KN) 1 F (KN) 2 1 5 1 2 4 6 8 25 5 75 25 5 75 DATA SHEET HRS-1 211. Other sizes available on request. AV INDUSTRIAL PRODUCTS Telephone: +44 ()116 2461 261 Fax: +44 ()116 2768 934 Email: mail@avindustrialproducts.co.uk Website: www.avindustrialproducts.co.uk 43

Jubo Couplings Jubo Couplings comprise of a polygon of rubber with moulded metal inserts. After moulding the product has a retaining band fitted to precompress the rubber, which is then removed after fitting. The product accoodates large angular & axial movements & reduces torsional vibration Applications Include: include Construction & Off Road Vehicles, Military vehicles, Automotive. PART NORMAL TORQUE RPM MAX A B C1 D JC22.11 157Nm 45 142 46 12 JC22.12 245Nm 35 181 51 132 14 JC22.13 343Nm 3 54 15 18 JC22.15 687Nm 24 263 68 19 2 JC22.555 4Nm 6 91 28 65 8 JC22.126 88Nm 5 117 32 85 1 JC22.524 49Nm 28 232 62 17 2 Max Torque Is 2.5 Normal Torque DATA SHEET JC 211. Max compression load in Kg deflection in. 44 AV INDUSTRIAL PRODUCTS Telephone: +44 ()116 2461 261 Fax: +44 ()116 2768 934 Email: mail@avindustrialproducts.co.uk Website: www.avindustrialproducts.co.uk

Rubber Sheets Plain Coercial Grade Rubber PART THICKNESS WIDTH ROLL LENGTH PCGR15141 1.5MM 1.4MTRS 1 MTRS PCGR3141 3MM 1.4MTRS 1 MTRS PCGR45141 4.5MM 1.4MTRS 1 MTRS PCGR6141 6MM 1.4MTRS 1 MTRS Fabric Insertion Coercial Grade Rubber PART THICKNESS WIDTH ROLL LENGTH FICR15141 1.5MM 1.4MTRS 1 MTRS FICR3141 3MM 1.4MTRS 1 MTRS FICR45141 4.5MM 1.4MTRS 1 MTRS FICR6141 6MM 1.4MTRS 1 MTRS Fine Fluted Coercial Grade Rubber PART THICKNESS WIDTH ROLL LENGTH FFCR15121 1.5MM 1.2MTRS 1MTRS FFCR3121 3MM 1.2MTRS 1MTRS Rubber Mats 3 x 3 4 x 4 PART NUMBER DIMENSION OF MAT MAX VERTICAL LOAD MAX LOAD Per MAT Kg DEFLECTION M33 3 X 3 X 8 189 Kg/m² 17 1.6 M44 4 X 4 X 12 219 Kg/m² 35 2.4 Mats can be supplied in natural rubber or oil resistant neoprene rubber DATA SHEET RS/RM 211. Max compression load in Kg defl ection in. We reserve the right to alter specifi cations or withdraw products without notice. AV INDUSTRIAL PRODUCTS Telephone: +44 ()116 2461 261 Fax: +44 ()116 2768 934 Email: mail@avindustrialproducts.co.uk Website: www.avindustrialproducts.co.uk 45

Armour Plate 2 Piece Mounts PART NO D A B C E F s ATP1 36 16.6 18 2 8 3 1 ATP2 ATP3 ATP4 ATP5 ATP6 36 6 6 15 16 6 1 36 8.5 12 13 1 4 1 5 16.5 2 24 12 1 1.5 5 16.5 22 24 12 12 1 6 2.5 2 23 13 1 1.5 Bulldog Genset Feet PART NO D2 D1 h m l BD124 11 8 48 M12 28 BD125 BD126 BD155 15 95 6 M12 28 15 95 M12 28 168 11 15 M16 42 46 AV INDUSTRIAL PRODUCTS Telephone: +44 ()116 2461 261 Fax: +44 ()116 2768 934 Email: mail@avindustrialproducts.co.uk Website: www.avindustrialproducts.co.uk

SF Mounts PART NO Z L T h m l SF5 115 5 85 46 M12 37 SF SF15 SF 165 135 46 M12 37 215 15 185 46 M12 37 265 235 46 M12 37 SL Mounts PART NO F D B h m l SL6 15 8 7 54 M12 27 Vibration & Noise Reduction Foot PART NO D D1 d H t NVF75 55 18 8 15 3 NVF25 NVF75 75 25 1 17 4 115 4 14 24 4 AV INDUSTRIAL PRODUCTS Telephone: +44 ()116 2461 261 Fax: +44 ()116 2768 934 Email: mail@avindustrialproducts.co.uk Website: www.avindustrialproducts.co.uk 47

SW Mount PART NO A K H d t Max Load (Kg) 4 IRHD 6 IRHD SW125 118 148 52 13.5 5 225 45 SW15 136 166 63 13.5 6 375 75 SW 184 22 82 17. 8 6 1 SW3 27 31 12 22. 1 15 3 48 AV INDUSTRIAL PRODUCTS Telephone: +44 ()116 2461 261 Fax: +44 ()116 2768 934 Email: mail@avindustrialproducts.co.uk Website: www.avindustrialproducts.co.uk

FREQUENCY RATIO Problem Solving AV Industrial Products has many years experience in the design and application of vibration control products, so you can be sure of the very best solutions to your vibration problems. TRANSMISSIBILITY 1 2 1 2 3 4 5 Service Means People Our dedicated and experienced staff are coitted to customer care and to provide a fast and efficient service you can rely on! Product Verification Our in-house testing facility ensures product compliance to our own high engineering specifications and that the highest standards of quality are always maintained.