Motor pumps SJM/SJM3 60Hz
Uses General water supply for buildings, condominiums, etc. Circulation of cold/warm water Conveyance of industrial water Conveyance and distribution of tap water Irrigation of paddies and fields Water sprinkling eatures Compact and lightweight through the adoption of -pole motor. Large-type-level performance covering a wide range of uses. Easy to install, and does not require a large space. Easy to perform maintenance and inspection as disassembly and reassembly can be performed without removing piping due to the B.P.O (back pull out) structure. Advantageous to piping load by stable installation due to straight-up discharge. Compliant with JIMS (The Japan Society of Industrial Machinery Manufacturers) 0BAR class. Model type description Model Nominal suction diameter (3mm) Nominal discharge diameter (3mm) requency (60Hz) Output (kw) Standard specifications Liquid quality resh water Pumping liquid Liquid temperature 0 C Total suction head -6m (0 C) Allowable push-in pressure See the specifications table. Impeller Closed Structure Bearing Sealed ball bearing Shaft seal Mechanical seal Impeller CAC406 or SCS3 Material Shaft Casing C00 or CD450 Type SJM Totally-enclosed-fan-cooled outdoor type SJM3 Totally-enclosed-fan-cooled outdoor type Motor Power supply Three-phase, 00/0V Synchronous rotation speed 3600min - lange spec JIS 0K (normal) (special dimensions for nominal diameter 3) Coating color BG5/ Differs with types. Special specifications Material change Motor change Total-iron Voltage change Special accessories oot valve Suction cover Sluice valve, check valve Packing, bolt, and nut included Companion flange Packing, bolt, and nut included * Standard accessory for 3mm in nominal diameter. Special companion flange (for making the discharge diameter identical to the suction diameter) Nut and bolt included Different diameter pipe See the illustration below. Anti-vibration mount Pressure gauge, vacuum gauge, compound gauge Cock and pipe included Anti-vibration joint Standard accessories Motor Common base Companion flange (packing, bolt, and nut included) (nominal diameter 3mm only) sets Priming plug * Keep in mind that outline drawings, etc., differ from standard drawings in the case of change to special specifications. oot valve, different diameter pipe, and special companion flange application table Nominal diameter mm Suction Discharge s d oot valve nominal diameter mm Different diameter pipe Special companion flange 3 3 3 40 40 40 50 40 50 40/50 65 50 65 50/65 65 00 00 65/ * Use the special companion flange for making the discharge diameter identical to the suction diameter.
Performance drawing Specifications table Nominal diameter mm Suction 3 40 50 65 Discharge 3 40 40 50 65 Model SJM-3 3L6. SJM-3 3L6 SJM-3 3M6. SJM-3 3M6 SJM-40 40L6. SJM-40 40L6 SJM-40 40M6. SJM-40 40M6 SJM-50 40L6. SJM-50 40M6 SJM3-50 40M6 SJM3-50 40H6 SJM3-50 40H6 SJM3-65 50L6 SJM3-65 50M6 SJM3-65 50M6 SJM3-65 50H6 SJM3-65L6 SJM3-65L6 Output kw... Discharge rate m 3 /min 0.05 0.05 0.05 0.05 Total head m 34.5 43 55 9 9 38 53 3 47 5 56 69.5 3 43 47.8 5. 9. 35 Discharge rate m 3 /min 8 8 8 8.0.0 Specifications Total head m 0 33.5 4.5 53 5 6 33.5 5 8 43 46.5 5 65 6 36.8 4 46.5 4 30 Discharge rate m 3 /min 5 5 5 5 0.7 0.7 0.7 0.7 0.38 0.38 0.38 0.33 0.38 0.7 0.7 0.7 7.3 Total head m 3 4 5 9.5 9 8.5 47 36 38.5 44.5 54.5 8.5 8 34 4 8 0 Allowable push-in pressure MPa 9 9 0.40 9 9 9 0.40 9 0 0.45 0.44 0.9 9 5 0.49 0.46 9 9 Motor specifications table Phase Classification Protection method Threephase outdoor Totally-enclosed-fan-cooled type Output kw. Voltage V 00/0 00/0 00/0 00/0 00/0 00/0 Rating Current A 3./3.0 6./5.8 8.6/7.8 4.0/3.0.0/9.5 /5.0 Rotation speed min - 3450/34 3370/340 3360/340 33/340 350/3530 350/350 Torque % 307/37 4/9 55/309 45/95 5/60 3/8 Starting Current A 3.9/6.3 3/4 54.6/60.0 96/05 3/45 78/96 Method Heat-resistance class Load side (D.S) 605ZZC3 6307ZZC3 6308ZZC3 6308ZZC3 Bearing Anti-load side (O.S) 604ZZC3 605ZZC3 605ZZC3 Parts list Pump type SJM-3 3L6. SJM-3 3L6 SJM-3 3M6. SJM-3 3M6 SJM-40 40L6. SJM-40 40L6 SJM-40 40M6. SJM-40 40M6 SJM-50 40L6. SJM-50 40M6 Mechanical seal type H-6 H-0H H-0H H-0H H-6 H-0H H-0H H-0H H-0H H-0H (for casing) (for priming plug) P P P P P P P P P P Pump type SJM3-50 40M6 SJM3-50 40H6 SJM3-50 40H6 SJM3-65 50L6 SJM3-65 50M6 SJM3-65 50M6 SJM3-65 50H6 SJM3-65L6 SJM3-65L6 Mechanical seal type H-5H- H-5H- H-5H- H-0H H-5H- H-5H- H-5H- H-5H- H-5H- (for casing) K3 K3 K3 K K (for priming plug) P P P P P P P P P 3
Assembly drawing SJM type lange dimensions: JIS 0K flange or equivalent Size table 3 3 40 40 50 40 SJM-3 3L6. SJM-3 3L6 SJM-3 3M6. SJM-3 3M6 SJM-40 40L6. SJM-40 40L6 SJM-40 40M6. SJM-40 40M6 SJM-50 40L6. SJM-50 40M6... A B D E KA KG L BN BX BP The pump flange nominal diameter of SJM-3x3 is 40. (The pump nominal diameter is called 3mm according to special companion flange.) 34 356 35 390 34 356 35 390 356 390 4 4 6 6 4 4 6 6 4 6 0 0 0 0 40 4 33 33 66 4 4 33 66 33 66 39 39 39 P½ P¾ P¾ P¾ P½ P¾ P¾ P¾ P¾ P¾ 0 0 60 60 0 0 60 60 0 60 (Unit: mm) mass kg 3 36 4 54 3 36 4 55 40 58 Assembly drawing SJM3-65 50L6 lange dimensions: JIS 0K flange or equivalent Nominal diameter Suction s Discharge d Model Output kw Pump and motor Common base Approx. Approx. mass 50kg 4
Assembly drawing lange dimensions: JIS 0K flange or equivalent Size table Nominal diameter Suction s Discharge d 50 40 65 50 65 Model SJM3-50 40M6 SJM3-50 40H6 SJM3-50 40H6 SJM3-65 50M6 SJM3-65 50M6 SJM3-65 50H6 SJM3-65L6 SJM3-65L6 Output kw A B D E KA BP BX 00 00 00 456 456 493 456 493 493 456 493 07 0 0 07 07 0 07 07 396 396 433 396 433 433 396 433 60 60 60 60 60 8 60 60 (Unit: mm) Pump and motor Common base Approx. mass kg 76 79 85 78 84 88 78 84 5
Example of internal structure diagram SJM type Parts list No. Part name Qty Material 3 4 5 6 7 8 9 0 3 4 5 6 7 Casing rame Impeller Impeller nut Wearing ring Common bed Key Deflector Mechanical seal Wearing ring Plug Plug Motor shaft Support bolt Motor C00 C00 CAC406 CAC406 CR CERAMICSCARBON NBR NBR CAC0 Wetted part SUS 304 SJM3 type No. Part name Qty Material 3 4 5 6 7 8 9 0 3 4 5 6 7 8 Casing rame Impeller Impeller nut Wearing ring Wearing ring Common base Key Deflector Mechanical seal Priming plug Plug Plug Motor shaft Support bolt Motor C00 or CD450 C00 CAC406 or SCS3 CAC406 CAC406 CR CERAMICSCARBON NBR NBR CAC0 Wetted part SUS 304 Differs with types. 6
MEMO
Head Office 30, Moriwake, Miyuki-cho, ukuyama-city, Hiroshima, 70-0003, Japan Tel.+8-84-955- ax.+8-84-955-5777 Room 00, 0/, Olympia Plaza, 55 King s Road, North Point, Hong Kong Tel.+85-57-0886 ax.+85-57-069 Moo 6 Udomsorayuth Rd., T.Bangkrasan, A.Bangpa-In, Ayutthaya 3 Thailand Tel.+66-35-0640 ax.+66-35-59 No.85, Yuan Qu Road(N), Bei Qiao, Min Hang District, Shanghai 009, China Tel.+86--6490-98 ax.+86--6490-96