Distinctive features and specifications Protected against accidental actuation SWKH709 Wide choice of colors Laser etched or pad printed symbols Illuminated or nonilluminated Sealed to IP9K ELECTRICAL SPECIFICATIS Currrent/voltage rating with resistive load : Silver plated contacts (A) : A VDC, 00,000 cycles 0 A VDC, 0,000 cycles (terminals. x 0.8 only) Gold plated contacts (D) : 0 ma V, 0,000 cycles Current/voltage rating with lamp load silver contacts (A) : function : 00 W VDC, 0,000 cycles other functions : 0 W VDC, 0,000 cycles Initial contact resistance : 0 mω max. Insulation resistance :.000 MΩ min. at 00 VDC Dielectric strength :,000 Vrms 0 Hz min. between terminals Mechanical life :0,000 cycles min. MATERIALS Case : PA Actuator : ABS Bezel : PA Contacts & terminals : brass, solid silver grain, silver plated (A) or brass, solid silver grain, gold plated (D) Contact roller : brass, nickel plated ENVIRMENTAL SPECIFICATIS Front panel sealing : IP9K according to DIN 0009 Salt spray resistance : 9 hours according to IEC, test f Vibration resistance : 000 Hz / 0 g per IEC 008 Operating temperature : 0 C to +8 C The company reserves the right to change specifications without notice. APEM www.apem.com
Overview CASE + LEDS KH Side A Side B SERIES Poles Contacts Sealing LEDS Wiring Protection guard On sides On sides Single pole Double pole Electrical functions R MOM MOM 7 MOM OFF MOM 8 OFF MOM 9 OFF A D Terminals Silver Gold plated Solder lug/quickconnect A 0 term. with barrier B 0 term. w/o barrier C 0 terminals for use with connector U9 or U Normalized quickconnect..0,8 D 0 term. with barrier E 0 term. w/o barrier F 0 term. for use with connector U9 or U Z IP9K Standard Terminals (continued) Normalized quickconnect.8x0.8 G 0 term. with barrier H 0 term. w/o barrier J 0 terminals for use with connector U8 X A B C M R D E F N S J K L P T... None LED V red LED V green LED V yellow LED V blue LED V white LED V red LED V green LED V yellow LED V blue LED V white LED V red LED V green LED V yellow LED V blue LED V white See following pages. ACTUATOR ACTUATOR MARKING Area A Area M Area B Type Color Orientation Symbols For nonilluminated application For illuminated application Blue / Dark blue Black Green Grey Yellow Red 7 Ivory 9 Orange A Aluminum bright N O S E OFF OFF OFF OFF A M B Symbols & Accessories : see end of the series. NOTICE : please note that not all combinations of above numbers are available. Refer to the following pages for further information. APEM www.apem.com
Case CASE + LEDS MODEL STRUCTURE Protection guard on sides KH Flat seal Single pole Double pole KH* KHR* MOM KH KH MOM KH KH KH7 KH7 MOM OFF MOM KH8 KH8 OFF MOM KH9 KH9 OFF * Function : single pole in double pole case Protection guard on sides KH Flat seal Single pole Double pole KH* KHR* MOM KH KH MOM KH KH KH7 KH7 MOM OFF MOM KH8 KH8 OFF MOM KH9 KH9 OFF * Function : single pole in double pole case APEM www.apem.com
CKRFUNA Case ELECTRICAL FUNCTIS AND CNECTIS In the tables below, terminal connections as viewed from bottom of switch. Only the contact area is represented. For single pole models, only terminals, and are to be considered (not terminals,, ). o = with terminal = momentary Positions Positions Function KHKH Function 8 KH8KH8 Function KKKH Function 9 KH9KH9 Function 7 KH7KH7 Function KH CKRFUN7B Function R KHR CKRFUN89A TERMINALS CASE + LEDS Solder lug / quickconnect Normalized quickconnect.x0.8 Normalized quickconnect.8x0.8 Ø.0 (.DIA) Ø.0 (.07DIA) FICHIER: CKRFUNP ECHELLE: 0. indice B le /0/09.0 (.77).x0.80 (.x.0).80x0.80 (.0x.0) A B C 0 terminals with barrier 0 terminals w/o barrier 0 terminals for use with connector U9 or U D E F 0 terminals with barrier 0 terminals w/o barrier 0 terminals for use with connector U9 or U G H J 0 terminals with barrier 0 terminals w/o barrier 0 terminals for use with connector U8 Terminals are marked on the case. The drawings show the maximum possible number of terminals. APEM www.apem.com
Case CTACT MATERIALS CASE + LEDS A D Silver Silver, gold plated SEALING CASE + LEDS Z IP9K standard LEDS CASE + LEDS Side A Side B Complete each enlarged box with one of the codes listed below. X Without LED Red Green Yellow Blue White VDC A B C M R VDC D E F N S VDC J K L P T No resistor U V W Y Z Amber 9 Red/green 8 LED consumption : 0 ma @ nominal voltage ( C) Other illumination solutions : on request. Side A 7 8 7 8 7 8 7 8 9 0 9 0 9 0 9 0 Side B APEM www.apem.com
Case LEDs WIRING CASE + LEDS The LED wiring diagram is shown on the case. Independent LED or integrated functions + 8 7 8 0 9 + 0 7 9 + 8 7 + 0 9 To have independent LEDs. G (standard) + H R 8 7 + R R 8 7 8 7 R R 0 9 0 9 0 9 R Available in Single Pole only, with H and J quickconnect terminals. + To obtain symbol illumination levels (night illumination when OFF and higher illumination when ). H wiring with LED on side A available with functions, 8, 9 and. H wiring with LED on side B available with functions, and 9. H wiring with LEDs available with functions 8 and 9. More information (H wiring schematics) : on request. Dotted line = external wiring, continuous line = internal wiring 8 7 0 9 To have a polarity inversion (typical application : fan motor). Dotted line = external wiring I Power supply betweeen and Load between and or and. Available with H and J quickconnect terminals. Please contact us for other wiring solutions. APEM www.apem.com
Actuator Marking ACTUATOR TYPE ACTUATOR For nonilluminated application For illuminated application Other rocker design : on request. ACTUATOR COLOR ACTUATOR Code Color Code Color Blue Grey / Dark blue Yellow Black Green 7 Red Ivory Code 9 A Color 7/ White Orange Aluminum bright Note : colors 7 and 7/ not available on illuminated versions. A softtouch varnish can be added. Consult us. MARKING ORIENTATI If no marking required, complete the box with code N. ACTUATOR MARKING OFF OFF OFF OFF Other orientations : on request N O S E APEM www.apem.com 7
Marking Mounting SYMBOLS ACTUATOR MARKING OFF XX No symbol Available symbols : see end of the series. Marking color White marking for illuminated rockers (laser etching) and nonilluminated black rockers (pad printing). Black marking for nonilluminated color rockers (pad printing). Other : on request. Laser etching resistance Water and petrol resistant acccording to EN08 Tear resistant (crosscut test) according to NF ISO 09 : class 0 UV resistant according to ISO 89 A M B.0 (.) CKRMAB A M B.00 (.) R:0.00 (.787 R) R:.00 (. R) Marking area For illuminated versions. The symbol will be included in the hatched area. Marking in M area : on request. 0.0 (.79) 0.0 (.799) 87.00 MATRIX MOUNTING 7.70 (.0) PANEL CUTOUT Panel thickness : 0.8 mm to. mm Recommended panel thickness : between mm and. mm.08 0/+0. (.80 0/+.0).80 0/+0. (.9 0/+.0) CKRDEC 8 APEM www.apem.com
K range Power rocker switches and indicators Symbols Most symbols meet the ISO 7000 standard graphical symbols for use on equipment (code given in bracket in the description). Contact us for symbols not featured in the following tables. Legend scale : Depending on space available on the product (see Symbols section at the end of each series). CODE SYMBOL DESCRIPTI XX None CODE SYMBOL DESCRIPTI CODE SYMBOL DESCRIPTI Emergency first Revolving light aid vehicle () 0 7 Rear ventilator Load tipping (7) 0 8 Heating (07) Loading light (7) 0 9 Door opening Tractor, rearward (7) 0 0 Windshield demister/defroster (0) Combine, direction of movement (78) 0 Windshield wiper (008) 7 Use no forks (0) 0 Windshield washer (0088) 8 Transmission () 07 Stop Ventilator fan (0089) 9 Working spot light () 08 Motion Side mirror defroster 0 Engine (00) 09 Up motion Restarting pump Horn (0) 0 Down motion Front fog lights (0) Lock () Hot 7 Rear fog lights (0) Taxi sign light () Cold 8 Propulsion system trim Working light (0) Hazard warning (008) 9 Beacon () Working light symmetric (0) Traveller lighting 0 Anchor Driver lighting ( Electric motor (00) 7 APEM www.apem.com 9
K range Power rocker switches and indicators Symbols Most symbols meet the ISO 7000 standard graphical symbols for use on equipment (code given in bracket in the description). Contact us for symbols not featured in the following tables. Legend scale : Depending on space available on the product (see Symbols section at the end of each series). CODE SYMBOL DESCRIPTI CODE SYMBOL DESCRIPTI CODE SYMBOL DESCRIPTI 8 All wheel drive Indicator 80 Front windshield heating 9 Differential lock () Brake release 8 Aus 0 Baggage room left door 8 Radiator fan 7 Baggage room right door 8 Remove retarder 8 Power blinds 8 Restricted speed 9 Engine idle control 8 Preheater Rear window wiper (0097) 70 Cruise res/set 8 ABS detection Rear window washer (0099) 7 Driver windows up/down 87 ECAS detection Lower load () 7 Middle door opening 88 Engine stop 7 Cab lock (0) 7 Front door opening 89 Cruise res/cancel 8 Extraction 7 Lighting in baggage room 90 ECAS reset 9 Pumping in 7 Cruise on/off 9 Driver windows heating 0 Rear PTO (7) 7 TV 9 Cruise set Front PTO 77 Pump 9 Air bag up/down Rockshaft down 78 Toilet 9 Read lighting Rockshaft up 79 Toilet decontamination 9 Lighting main switch 0 APEM www.apem.com
K range Power rocker switches and indicators Symbols Most symbols meet the ISO 7000 standard graphical symbols for use on equipment (code given in bracket in the description). Contact us for symbols not featured in the following tables. Legend scale : Depending on space available on the product (see Symbols section at the end of each series). CODE SYMBOL DESCRIPTI CODE SYMBOL DESCRIPTI CODE SYMBOL DESCRIPTI 9 Heating using water AD AV 97 Low beam AE AW 98 Position lights AF AY 99 Diesel acceleration AG Battery charging condition (07) AZ A Manual mode AH Turn signals (008) B A Clockwise cabin rotation AJ High beam (008) B A Anticlockwise cabin rotation AK Differential lock, bogie (00) B A AL Brushing with a rotating brush (0070) A AM Differential lock, transfer case x (7) A Parking brake AN Loader bucket, float () A7 AP Loader bucket (7) A8 AQ Rear window washer & wiper (0098) A9 AR Header Header drive (79) AA AS Excavator/backhoe boom side shift (09) AB AT Chemical water treatment (8) AC AU Grapple skidder, single funct boom (7) APEM www.apem.com
K range Power rocker switches and indicators Accessories MOUNTING PANEL END MOUNTING PANEL MIDDLE SINGLE MOUNTING PANEL 9. (.) U U MOUNTING PANEL CUTOUT For element U7 For elements U For elements (xu + x U).00 0/+0.0 (.98 0/+.008).00 0/+0.0 77.0 0/+0.0 (.008 0/+.008) (.0 0/+.008) 8.0 0/+0.0 (.898 0/+.008) 8.0 0/+0.0 (.898 0/+.008) 8.0 0/+0.0 (.898 0/+.008).00 (.0).00 (.0).00 (.0).80 (.0).0 (.0).80.0 (.0) (.0). (.0).80.0 (.0) (.0). (.70) U7 Recommended panel thickness :.0 mm.80 mm.0 mm.0 mm.0 mm mm.80 mm For additional elements, add.0 mm (.09) X ADAPTER Front panel dismounting X ADAPTER Rear panel dismounting PANEL CUTOUT.00 0/+0. (.8 0/+.00) 0.00 (.99) 0.00 (.99).00 0/+0. (.7 0/+.00).0 9.00.00.0 9.00.00 (.8) (.78) (.98) (.8) (.78) (.98) U00 Recommended panel thickness : 0.0 mm to.0 mm U070 Recommended panel thickness :.0 mm 0,/0 to.0 mm 0,/0 in stages of 0.0 mm Adapter colors (replace 0 with code) / : dark blue : black : grey : yellow : red 7/ : white APEM www.apem.com
K range Power rocker switches and indicators Accessories ACTUATOR REMOVING TOOL U0 EXTRACT ACTUATOR (KR LY) Allows the extraction of the rocker / rocker support assembly. Place the claws under the support and push as indicated by the arrow. EXTRACT ROCKER (KR LY) Allows to separate the rocker from its support. Insert the tool between rocker and support as indicated by the arrrow. Pull out the tool in the opposite direction. EXTRACT SWITCH (KR, KL AND KI) Allows to extract switch from panel mounting units. tools are necessary. Insert the tools between switch and panel mounting units from the rear to compress the snapin device. Pull off switch manually. tools are supplied CNECTORS Standard color : black. Other colors : on request. Connectors cannot be combined with wiring types H and I. U0 U8 U9 terminal version For use with terminals type,, or.. (/) tabs to be fitted by the user (example : TE8). Can be used for the KG series. 0 terminal version For use with terminals type H or J..8 (.0) tabs to be fitted by the user (example : AMP/Tyco 097779). 0 terminal version For use with terminals type B, C, E or F.. (/) tabs to be fitted by the user (example : TE8)..00 (.77).0 (.).0 (.) ➀ pokayoke.00 (.98).00 (.) 0.80 (.89).0 (.).00.0 (.) (.9) 0.0 (.80) 9.0 (.7).0 (.9).00 (.) 0.80 (.89) 9.0 (.7) U0 U8 U9 CKRU90A APEM www.apem.com
K range Power rocker switches and indicators Accessories CNECTORS (continued) U 0 terminal version For use with terminals type B, C, E or F.. (/) tabs to be fitted by the user (example : «Timer» terminals TE978) ➀ pokayoke U BLANKING CAPS Usefull for future extensions..0 (.8).0 (.09) Code Color Code Color U7 Blue U7 Grey U7/ Dark blue U7 Yellow U7 U7 Black Green U7 U77 Red Ivory U79 Orange Recommended panel thickness :.0 mm to mm.00 (.8).0 0.80 (.7) (.89).80 (.8).00 (.98) Connectors can be hanged on specific hole plugs. Contact APEM. APEM www.apem.com