HAY TEDDERS Three-point attachment trailed

Similar documents
HAY TEDDERS. fella.eu. Three-point attachment trailed. Outstanding spread pattern Wide range of products. Innovative

DISC MOWERS. fella.eu. Spur gear drive. Light Efficient Robust

The Fendt Twister tedder

ALPINE. fella.eu. Forage harvesting machines. Independent series Light and robust High-quality equipment

MF Hay & Forage. MF Mowers, MF Rakes & MF Tedders Product Range FROM MASSEY FERGUSON

Fendt Former Hay Rake

Forage harvesting with system.

VOLTO. Spreading and drying.

463(S)-523(T) T Fanex rotary tedders

Fendt Former Hay Rake

TE TE4000/TE4500/TE6000/

Taarup 2400 and 2500 series Mounted Disc Mowers. Disc Mowers offering reliable performance and a clean cut

Work efficiently and safely in any environment.

DMC U B O TA M O W E R C O N D I T I O N E R S DMC8000/DMC8500

Work efficiently and safely in any environment.

ActiveMow Disc mowers

KRONE a successful tradition for more than 100 years

ROTARY RAKES AND TEDDERS

Rapid wilting retains the quality

HAYBOB 300 / 360

Pöttinger HIT. Tedders

PÖTTINGER HIT / HIT T

ROTARY TEDDERS: ROTARY RAKES: 4 - rotor, 6- rotor. 1 - rotor, 2- rotor in-line rakes, 2 rotor rakes with central swath.

PÖTTINGER EUROTOP. Rotary rakes Find out more online!

COMPACT DISC HARROW HELIODOR 9

AM Disc mowers w rone r.de one

Round Bale Wrappers

LINER TWIN 750 TWIN. Taking raking into a whole new dimension.

EXTRΔ Mounted Plain Disc Mowers

Watch Vermeer products work at vermeer.com.

Gigant 10 and Gigant 12 System Tracs

MOWERS, TEDDERS AND RAKES

ROLABAR RAKES 57 I 256 I 258 I 260 I 216

ELHO Mower conditioners

Triple set. GXT range, working width 40 (12.3 m)

FURROW PRESSES VARIOPACK FIXPACK FLEXPACK

EXTRΔ H-432H-440H. Mounted Plain Disc Mowers

You can t rely on the weather. But you can rely on your John Deere MoCo.

DMC DMC6000/DMC7000/ DMC8000/DMC8500 Mounted and trailed disc mower conditioners with working widths from 2.4 to 3.5m

Swadro 907 Swadro 1000 Rotary Rakes

Kubota Hay Tools and Spreaders Now Arriving at Kubota Dealerships Nationwide

EasyCut Trailed Center PULL-TYPE MOWER CONDITIONER

EXTRΔ H-432H-440H. Mounted Plain Disc Mowers

Pneumatic fertiliser spreader

RX Self-loading and harvesterfi lled forage wagons

New tractors, harvesters and forage equipment strengthen Massey Ferguson s range in Turkey

Gyrotedders 2, 4 and 6 Rotor Trailed / 2 and 4 Rotor Mounted Gyrotedders

LINER Central swathers. Taking swathing into a whole new dimension.

Belt Merger MERGE MAXX 950.

Front loader Fendt CARGO

Gyrotedders 2, 4 and 6 Rotor Trailed / 2 and 4 Rotor Mounted Gyrotedders

Front loader. Fendt CARGO

Multidisc Mowers GMD and 77HD SELECT

POWER TRANSMISSION LAWN & GARDEN

PH SERIES PH1000F-2000F SERIES. Heavy-duty rigid and foldable power harrows

Container chassis for more business flexibility

Trailed Forage Harvesters FCT 1355

Front loader Fendt CARGO

FARO 5010 FARO 4010 COMBILINE

Kubota broadens the range Introducing new additions to the Kubota Family

Fendt Slicer disc mower

Fanex (T) T C-1103C-1133T-1403C. Rotary Tedders

The Professional Kinds Of Riding Surfaces Maintenance Tools

Field GrainBelts Harvest GrainBelts Transfer GrainBelts GrainDeck GRAINBELTS

Field GrainBelts Harvest GrainBelts Transfer GrainBelts GrainDeck GRAINBELTS

GF 102 / 1002 / 1012 Series

Swadro. Rotary Rakes.

AX Self-loading and forager-fi lled forage wagons

Agrolux GERMAN ENGINEERING

Overview. KNOTT brakes overview The basics for around 2000 solutions BRAKES. We make your brake

DEUTZ-FAHR BIGMASTER Series BIGMASTER

leaders in quality mowers tedders rakes

DM1000/DM2000/DM3000/ DM3300/DM4000 Mounted plain disc mowers with a working width from m

Cirrus Activ Cirrus Cirrus Ac A tiv cti

WM Kartoffeltechnik. Innovations for your success. Two-row potato harvesters WM 6500 WM 8500

Rear-mounted disc mower DISCO 3500 Contour

NEW! Now with a Euro 4 engine. More than a Transporter

Tedders. Highest output due to unique hooktines. innovators in agriculture

CONSTRUCTION MACHINES & CONSTRUCTION DEVICES PRODUCTS AND SPECIFICATIONS

Self-loading forage wagons PONY / BOSS / PROFI-GP

HP MF4600. Proven power and efficiency

JX STRADDLE SERIES HP RATED POWER

englisch For healthy growth EQUIPMENT AND ACCESSORIES Profi slurry tankers

Large-capacity spreaders

Multi-purpose forage wagon. Giga-Vitesse CFS

FARMALL. SPRING INTO A NEW CASE IH 3000^ FARMALL. PROVEN SINCE REWARD DOLLARS ON FARMALL C, U & JX STRADDLE MODELS PARTS AND SERVICE

Trailed field sprayers Primus and Albatros

NEW. Fit for any forest. With electronic engine management. Chainsaw STIHL MS 462 C-M

COMPACT TRACK LOADERS PRODUCT RANGE

FARMALL B HP TRACTORS

Flatbed trailers and wheels-in trailers Tandem trailers and turntable trailers. Light professional trailers up to 3.5 t.

rogator 618s SERIOUS MACHINERY

RX Self-loading and harvesterfilled

Agriculture. Your handling partner

LELY LOTUS Tedders. innovators in agriculture

Royal. Royal Silage Trailer

PÖTTINGER TOP / TOP C

5E 3-cylinder Series Tractors. from 55 to 75 hp (97/68EC)

Pedals for commercial and special-purpose vehicles. Robust Electronically controlled Flexible installation.

DISC MOWERS, TEDDERS & RAKES

Transcription:

HAY TEDDERS Three-point attachment trailed Innovative Outstanding spread pattern Wide range of products fella.eu

2 3 BEST HARVEST TRADITION, INNOVATION, PASSION For more than 90 years, FELLA has always meant innovative technology, outstanding quality and personal passion in the service of agriculture. As the specialist for Made in Germany forage harvesting technology, we offer our customers all around the world an extremely wide range of products in terms of mowers, conditioners, hay tedders and swathers. MADE IN GERMANY FELLA has been represented in all important markets around the world since the 1980s. Through close contact with farmers and agricultural contractors, our machines are constantly undergoing further development towards perfection. In this way, even the most diverse markets can enjoy mutual benefits. FELLA s objective is to provide every customer with the optimum solution for his farm and his requirements. The first hay tedders were produced on our company site in Feucht as early as the mid-1960s. All key components of our forage harvesting machines are assembled and tested in Feucht by specialists before they leave our works. At the same time, our research and development department continues to invest all its expertise into the development of ever better and more efficient machines. This will guarantee the outstanding FELLA Made in Germany quality far into the future for all our customers the world over. FELLA the forage harvesting specialist: Made in Germany quality More than 90 years of experience in the field of agricultural engineering In-house research and development department All machines are assembled and tested by specialists on the company's site Innovative, efficient, long-lasting

4 5 HAY TEDDERS ROTOR GEAR FELLA rotor heads are of an enclosed design which reliably protects all important components from dirt and dust. This design ensures a long service life and makes it a very attractive proposition due to the low maintenance effort required. WHY A FELLA HAY TEDDER? FELLA launched its first hay tedder onto the market as early as 1963. The expertise it has gathered since then is reflected in the design and reliability of the hay tedders which FELLA produce today. In addition to optimal ground adaptation, a particular quality feature with FELLA hay tedders is the crossover (overlapping) of the tines. This feature with FELLA hay tedders is particularly large-scale in its design, which ensures an excellent and thorough mixing of the forage and an outstanding spread pattern.! Benefits at a glance: Optimal mixing of the forage Outstanding spread pattern Very wide product range Rotor gear POWER TRAIN The individual rotors are driven via a generously dimensioned hexagonal shaft and robust universal joints. This type of power transmission is free from backlash, smooth and reliable, and has proven itself time and again in FELLA drum mowers as well, even under harsh working conditions. Opinions based on actual use: The area which I farm falls within a wide radius and the access roads are often very cramped. My search for a tedder with plenty of punch yet which was also compact ended when I discovered FELLA. The new TH 13010 meets my requirements exactly and never fails to amaze me time and again with its agility and very high area output. The extremely uniform spread pattern has impressed me just as much as the high-quality workmanship of the machine itself. I can really recommend FELLA to all my fellow farmers! Drive via hexagonal shaft and universal joints FRAME All hay tedders are equipped with thick-walled, strongly dimensioned square frame tubes which ensure excellent rigidity and a very long service life. The individual rotor frames are connected via sturdy frame joints with special flange sleeves and hardened pins. All joints can be relubricated and are of robust design. This contributes to ensuring optimum ground adaptation even after many years of service. Terwisscha van Scheltinga, farmer, Netherlands Frame joints that can be relubricated Square frame tube

6 7 BEST HARVEST FAST AND LOW-IMPACT! SUPER C THE QUALITY FEATURE The Super C quality feature guarantees an extremely high level of quality and represents an extremely long service life. The tines used at FELLA have to undergo a test cycle and survive 200,000 impacts without damage. Only then may they be fitted on FELLA machinery. As early as the manufacturing stage, special process steps are used to design the tines for toughness, elasticity and durability. The SUPER C tine has a tine diameter of 9.5 mm, a winding diameter of 70 mm and six windings, making it one of the most efficient on the market and typical of the high manufacturing quality of each and every FELLA hay tedder. COMB EFFECT ONLY WITH EQUAL-SIDED TINES Only equal-sided tines allow you to achieve an optimum mixing of your high-quality forage. This is known as the comb effect since, during the process, the different layers of forage are perfectly mixed together and turned, providing the optimum production of high-quality forage. Tines with sides of equal length also provide the benefit that you do not need right-hand and left-hand tines but only one kind of tine, which makes spare parts management easier. 9.5 mm tine diameter 70 mm winding diameter 6 windings Super C extremely high quality, extremely long service life Tough, elastic and durable Test cycle with 200,000 impacts Tines with equal sides TINE ARMS The tine arms are made of a tough, galvanised flat steel bar, which allows a wide contact surface between tine and rotor disc. This ensures excellent power transmission even under the harshest of working conditions. The forces are optimally absorbed whenever the ground is uneven. All FELLA hay tedders (except the Alpine) are equipped with a novel tine saver as a standard feature, which protects machines which are following behind and also your valuable livestock. At FELLA, the tines are secured under the tine arm. On the one hand, this arrangement has the advantage that the upper side is smooth and, as a result, no forage can be left hanging. On the other hand, it allows the tine greater freedom of movement, which contributes to optimal processing of your high-quality forage. Wide contact surface for optimum power transmission Comb effect perfect mixing of your high-quality forage Equal-sided tines FELLA Super C quality tines Tine arms made of galvanised flat steel bar excellent power transmission Tine saver Smooth top side of the tine arm no forage sticks to the tine arm

8 9 CONTENTS OVERVIEW HAY TEDDER MACHINE DESIGNATIONS AND ABBREVIATIONS D: Three-point headstock DS: Three-point headstock, rigid DN: Three-point headstock with trailing device Hydro: Hydraulic activation Trans: Transport chassis T: Tractor linkage drawbar/hitch Page 12 13 HAY TEDDER WITH THREE-POINT AT- TACHMENT, ALPINE Hay tedders for the alpine area are a very attractive proposition because of their light but very robust construction and the quality of work which they produce. Machine designation TH 401 DS TH 431 D Hydro Approx. working width in m 4.00 4.30 5.70 Approx. weight in kg 305 385 498 Approx. power requirement in kw/hp TH 601 D Hydro 20/27 22/30 25/34 Number of rotors 4 4 6 Number of tine arms per rotor 5 6 5 Rotor chassis tyres 13/6.50-6 15/6.00-6 15/6.00-6 Page 16 17 HAY TEDDERS WITH THREE-POINT ATTACHMENT All-rounders where hay tedders are concerned, which attract attention thanks to the excellent quality of work they produce and their flexibility of use. Machine designation TH 4504 DN TH 5204 DN TH 6606 DN TH 7706 DN TH 8608 DN Approx. working width in m 4.50 5.20 6.60 7.70 8.60 Approx. weight in kg 574 606 822 946 1,172 Approx. power requirement in kw/hp 22/30 22/30 30/41 60/82 70/95 Number of rotors 4 4 6 6 8 Number of tine arms per rotor 6 6 6 6 6 Rotor chassis tyres 16/6.50-8 16/6.50-8 16/6.50-8 16/6.50-8 16/6.50-8 Page 20 25 HAY TEDDERS WITH TRANSPORT CHASSIS Hay tedders with transport chassis for fast and safe travel compact on the road, wide reach out in the field. Machine designation TH 800 Trans TH 901 Trans TH 1101 Trans TH 13010 Trans Approx. working width in m 7.70 8.60 10.20 12.70 Approx. weight in kg 1,237 1,608 1,676 2,000 Approx. power requirement in kw/hp 30/41 40/54 40/54 66/90 Number of rotors 6 8 8 10 Number of tine arms per rotor 6 6 6 6 Tyres Rotor chassis 16/6.50-8 10PR 16/6.50-8 10PR 16/6.50-8 16/6.50-8 Page 28 33 TRAILED HAY TEDDERS Classics amongst hay tedders with a wide range of working widths and excellent ground adaptation. Machine designation TH 540 T Hydro TH 790 TH 790 Hydro TH 1100 Hydro TH 1300 Hydro TH 1550 Hydro Approx. working width in m 5.20 7.70 7.70 10.20 12.70 15.00 17.50 Approx. weight in kg 555 790 890 1,090 1,305 1,860 2,038 Approx. power requirement in kw/hp TH 1800 Hydro 22/30 30/41 30/41 35/48 45/61 58/79 75/102 Number of rotors 4 6 6 8 10 12 14 Number of tine arms per rotor 6 6 6 6 6 6 6 Rotor chassis tyres 16/6.50-8 16/6.50-8 16/6.50-8 16/6.50-8 16/6.50-8 16/6.50-8 10PR 16/6.50-8 10PR

10 11 BEST HARVEST! Based on tradition, innovation and passion. Hay tedders from FELLA Three-point attachment, Alpine

12 13 THREE-POINT ATTACHMENT ALPINE HAY TEDDER TH 401 DS TH 431 D HYDRO TH 601 D HYDRO Specialists for alpine terrain Light construction Ease of handling SPECIALISTS FOR ALPINE TERRAIN FELLA has developed three very light yet robust hay tedders for alpine terrain. Maximum safety is still ensured even on extreme slopes thanks to the low centre of gravity and the compact transport position. As with all FELLA hay tedders, the forage is picked up by the tines and turned gently without suffering damage. A light, loose and well mixed mat of forage is created, all of top quality. The edge spreading device which is fitted as standard (TH 431 D Hydro and TH 601 D Hydro) helps you to avoid loss of forage even under the most difficult of harvesting conditions or when working in hillside lines. Using the spreading angle adjustment system, it is possible to adjust the rotor pitch to three different positions. This provides you with the advantage of being able to optimally adjust yourself to the most varied of harvesting conditions. TRACTION COMPRESSION SYSTEM Through the patented traction compression system, the weight of the machine is transferred onto the lower links. The towing point between hay tedder and tractor is then positioned very low. As a result, no bending moment is produced and there is no wear on the three-point headstock. When lifting the machine at the headland, the hay tedder is automatically centralised, which provides safe and stable driving behaviour. When back at work, the system again ensures optimum ground contour following and excellent trailing behaviour of the hay tedder. Even when travelling downhill, the machine does not run into the back of the tractor. The tines are reliably prevented from piercing the ground, thereby sparing your sward from mechanical damage. Forage contamination is kept to a minimum, providing top-quality forage thanks to the FELLA patent. TH 601 D Hydro INTEGRATED SWING BRAKE The three-point hay tedders (TH 431 D Hydro and TH 601 Hydro) are equipped with an integrated, adjustable swing brake. The brake reliably prevents the hay tedder from generating a rocking motion where there are heavy deposits of forage or the tractor and machine are travelling at relatively high speeds. CONVENIENCE OF OPERATION WHICH SPEAKS FOR ITSELF The rotors are easily folded in and out hydraulically in a synchronised operation directly from the tractor seat. Thanks to this synchronised lifting facility, safe operation is also possible when working on hillsides. With patented traction compression system Transport position Traction compression system Specially developed for alpine terrain Super C tines Convenience of operation which speaks for itself WE RECOMMEND: Contact wheel for improved ground adaptation Electric lighting for those times when the working day is longer than usual

14 15 BEST HARVEST! Based on tradition, innovation and passion. Hay tedders from FELLA Three-point attachment

16 17 HAY TEDDERS WITH THREE-POINT ATTACHMENT TH 4504 DN TH 5204 DN TH 6606 DN TH 7706 DN TH 8608 DN The all-rounders Wide range of applications THE ALL-ROUNDERS The classic all-rounders in the FELLA range of hay tedders, with which you can produce high-quality forage in any region and under an extremely wide range of different operating conditions, are designed for the fitting of a three-point attachment and equipped with a trailing device. These models attract prospective buyers due to their sturdy construction and compact transportation dimensions as well as because of their flexibility in regard to cost-effectiveness and work output. As with all FELLA hay tedders, the forage is picked up by the tines and turned gently without suffering damage. A light, loose and well-mixed mat of forage is created, representing top-quality forage material. With the central edge spreading device which is fitted as standard, edges of fields no longer present any problems it's all high-quality forage down to the last blade of grass. Because of the spreading angle adjustment system, you can also always optimally adapt your machine to the harvesting situation, whatever it is. Edge spreading device operated from the tractor seat TH 8608 DN TRACTION COMPRESSION SYSTEM Through the patented traction compression system, the weight of the machine is transferred onto the lower links. The towing point between hay tedder and tractor is then positioned very low. As a result, no bending moment is produced and there is no wear on the three-point headstock. When lifting the machine at the headland, the hay tedder is automatically centralised, which provides safe and stable driving behaviour. When back at work, the system again ensures optimum ground contour following and excellent trailing behaviour of the hay tedder. Even when travelling downhill, the machine does not run into the back of the tractor. The tines are reliably prevented from piercing the ground, thereby sparing your sward from mechanical damage. Forage contamination is kept to a minimum, providing top-quality forage thanks to the FELLA patent. INTEGRATED SWING BRAKE The three-point hay tedders are equipped with an integrated, adjustable swing brake. The brake reliably prevents the hay tedder from generating a rocking motion where there are heavy deposits of forage or the tractor and machine are travelling at relatively high speeds. With patented traction compression system Edge spreading device Traction compression system CONVENIENCE OF OPERATION WHICH SPEAKS FOR ITSELF The rotors are easily folded in and out hydraulically in a synchronised operation directly from the tractor seat. Safe operation is also possible when working on hillsides thanks to this synchronised lifting facility. When the machine is folded to the transport position, the automatic safety switch-off is activated, with the rotors merely freewheeling. This reliably protects the machines from the consequences of incorrect operation and guarantees safe travel out on the road. Optimum ground contour following excellent trailing behaviour No running into the back of the tractor when travelling downhill Central edge spreading device fitted as standard Super C tines WE RECOMMEND: Night swathing gear box Hydraulic edge spreading device Contact wheel with balloon tyre for improved ground adaptation TH 8608 DN in transport position

18 19 BEST HARVEST! Based on tradition, innovation and passion. Hay tedders with transport chassis from FELLA

20 21 HAY TEDDERS WITH TRANSPORT CHASSIS TH 800 TRANS Attachment via tractor linkage drawbar or hitch NARROW ON THE ROAD WIDE OUT IN THE FIELD On the TH 800, the machine is attached via a tractor linkage drawbar or a hitch. As a result, maximum flexibility and a high level of cost-effectiveness is guaranteed because this machine can be operated with a tractor power output from as low as 41 hp at a working width of 7.7 metres. The wide transport chassis and the compact transport position ensure safe and time-saving travel from field to field the very things required when the harvesting weather doesn't want to do what you want it to do! Compact transport position Wide working width Low transport length CONVENIENCE OF OPERATION WHICH SPEAKS FOR ITSELF The rotors are easily folded in and out by a hydraulic sequential control system directly from the tractor seat. Only a simple control unit is required to do this. Safe operation is also possible when working on hillsides thanks to the synchronised lifting facility. When the machine is folded to the transport position, the automatic safety switch-off of the rotors is activated. This reliably protects the machines from the consequences of incorrect operation and guarantees safe travel out on the road. PERFECT WORKING CONDITIONS As with all FELLA hay tedders, the forage is picked up by the tines and turned gently without suffering damage. A light, loose and well-mixed mat of forage is created, all of top quality. With the central edge spreading device which is fitted as standard, edges of fields no longer present any problems it's all high-quality forage down to the last blade of grass. Because of the spreading angle adjustment system, you can also always optimally adapt your machine to the harvesting situation, whatever it is. TH 800 Trans In the working position, the transport chassis is folded up in front of the rotors, which ensures an optimum centre of gravity. As a result, the chassis does not stand in the ejection path of the forage and the loading created by the centre rotors is reduced to a minimum. Perfect prerequisites for producing your high-quality forage. Attachment via tractor linkage drawbar or hitch High level of cost-effectiveness High level of operational convenience Transportation speed of up to 40 km/h possible Perfect working conditions Optimum weight distribution Edge spreading device fitted as standard Super C tines WE RECOMMEND: Night swathing gear box Hydraulic edge spreading device Spare wheel 18/8.50-8 Hyper-balloon tyres Transport position

22 23 HAY TEDDERS WITH TRANSPORT CHASSIS TH 901 TRANS TH 1101 TRANS Attachment via lower links COMPACT CONSTRUCTION WIDE WORKING WIDTH The TH 901 and 1101 Trans are two hay tedders which can be conveniently attached via the lower links of the tractor. With a working width of 8.6 metres or 10.2 metres, you can easily handle any area of grassland no matter how big. The wide transport chassis and the compact transport position ensure safe and time-saving travel from field to field the very things required when the harvesting weather doesn t want to do what you want it to do! Compact transport position SLS Wide working width Low transport length SAFETY COMES FIRST Thanks to the SLS (security lock system) from FELLA, the maximum safety for your machine is guaranteed during folding operations. SLS is an automatic, hydraulically activated switch-off and positioning system with integrated freewheel which interrupts the flow of power to the rotors when the halves of the machine are folded up. As a result, a high degree of safety is ensured in the transport position as well as during maintenance work. The possibility of damage to the power train is also excluded in the event of incorrect operation. CONVENIENCE OF OPERATION WHICH SPEAKS FOR ITSELF The rotors are easily folded in and out by a hydraulic sequential control system directly from the tractor seat. Safe operation is also possible when working on hillsides thanks to the synchronised lifting facility. TH 901 Trans PERFECT WORKING CONDITIONS As with all FELLA hay tedders, the forage is picked up by the tines and turned gently without suffering damage. A light, loose and well mixed mat of forage is created, representing top-quality forage material. With the central edge spreading device which is fitted as standard, edges of fields no longer present any problems it's all high-quality forage down to the last blade of grass. Because of the spreading angle adjustment system, you can also always optimally adapt your machine to the harvesting situation, whatever it is. In the working position, the transport chassis is folded up in front of the rotors, which ensures an optimum centre of gravity. As a result, the chassis does not stand in the ejection path of the forage and the loading created by the centre rotors is reduced to a minimum. Perfect prerequisites for producing your high-quality forage. Attachment via CAT II lower links High level of operational convenience Transportation speed of up to 40 km/h possible Optimum weight distribution Synchronised lifting Edge spreading device fitted as standard Super C tines WE RECOMMEND: Night swathing gear box Hydraulic edge spreading device Contact wheel with hyperballoon tyre for improved ground adaptation Transport position Security lock system

24 25 HAY TEDDERS WITH TRANSPORT CHASSIS TH 13010 TRANS Compact construction Extremely agile COMPACT MACHINE, POWERFUL PERFORMANCE The new TH 13010 hay tedder stands out from the crowd because of its compact construction, low transportation length and enormous agility. But the compact look is deceptive because the hay tedder has ten rotors each with six tine arms, which adds up to a respectable working width of 12.7 metres. The wide transport chassis with its large-volume tyres ensures stability on hillsides, overall smooth running and reliable travel from field to field. All in all, the perfect combination, consisting of a compact and high-performance machine with a wide working width and extreme agility. Wide working width SLS SAFETY COMES FIRST Thanks to the SLS (security lock system) from FELLA, the maximum safety for your machine is guaranteed during folding operations. SLS is an automatic, hydraulically activated switch-off and positioning system with integrated freewheel which interrupts the flow of power to the rotors when the halves of the machine are folded up. As a result, a high degree of safety is ensured in the transport position as well as during maintenance work. The possibility of damage to the power train is also excluded in the event of incorrect operation. PERFECT WORKING CONDITIONS As with all FELLA hay tedders, the forage is picked up by the tines and turned gently without suffer - ing damage. A light, loose and well mixed mat of forage is created, representing top-quality forage material. Because of the spreading angle adjustment system, you can also always optimally adapt your machine to the harvesting situation, whatever it is. In the working position, the transport chassis is used for ground sensing, which promotes optimum ground contour following due to the large size of the tyres perfect working conditions for producing your high-quality forage. TH 13010 Trans Compact machine, powerful output Transport length only 5.5 metres Transport speed of up to 50 km/h possible Synchronised lifting for high-level stability Headland position possible Optimum ground contour following Super C tines Transport wheels used as contact wheels in transport position High level of operational convenience Headland position Transport position WE RECOMMEND: Drawbar eye, rigid Drawbar eye, turnable Hitch hook Security lock system

26 27 BEST HARVEST! Based on tradition, innovation and passion. Trailed hay tedder from FELLA

28 29 TRAILED HAY TEDDERS TH 540 T HYDRO Attachment via tractor linkage drawbar or hitch Hydraulic folding mechanism SMALL BUT POWERFUL The TH 540 T Hydro is the smallest model in the range of trailed hay tedders from FELLA. It attracts prospective buyers because of its flexible and simple attachment by tractor linkage drawbar or by hitch, as well as because of its clean and well established work quality. As with all FELLA hay tedders, the forage is picked up by the tines and turned gently without suffering damage. A light, loose and well mixed mat of forage is created, representing top-quality forage material. With the central edge spreading device which is fitted as standard, edges of fields no longer present any problems it s all high-quality forage down to the last blade of grass. Because of the spreading angle adjustment system, you can also optimally adapt your machine to the harvesting situation, whatever it is. CONVENIENCE OF OPERATION WHICH SPEAKS FOR ITSELF The rotors are easily folded in and out hydraulically directly from the tractor seat. Safe operation is also ensured when working on hillsides thanks to the synchronised lifting facility. When the machine is folded to the transport position, the automatic safety switch-off of the rotors is activated. This reliably protects the machines from the consequences of an incorrect operation procedure and guarantees safe travel out on the road. Optimum ground contour following excellent trailing behaviour Super C tines TH 540 T Hydro Convenience of operation which speaks for itself TH 790 Excellent price/ performance ratio For small tractors SIMPLE YET FULLY DEVELOPED TECHNOLOGY SEE FOR YOURSELF! The TH 790 will win you over with its excellent price/performance ratio, combined with the benefits possessed by its big brothers. Because of its simple yet very well engineered and sturdy construction, it is easy to handle and proves its point through its excellent work quality. The machine is suitable for use particularly behind small tractors, also adapts well to uneven terrain and can cover a wide range of applications. The switchover from working position to transport position is performed quite simply after preselection of drawbar and running wheel locking by driving the tractor forwards or backwards. PERFECT WORKING CONDITIONS As with all FELLA hay tedders, the forage is picked up by the tines and turned gently without suffering damage. A light, loose and well mixed mat of forage is created, representing top-quality forage material. With the central edge spreading device which is fitted as standard, edges of fields no longer present any problems it s all high-quality forage down to the last blade of grass. Because of the spreading angle adjustment system, you can also optimally adapt your machine to the harvesting situation, whatever it is. TH 790 Excellent price/performance ratio Optimum ground contour following Convenience, pure and simple Machine for wide application range Top-level work quality Super C tines Transport position

30 31 TRAILED HAY TEDDERS TH 790 HYDRO TH 1100 HYDRO TH 1300 HYDRO The classics Tried and tested technology Wide working widths THE CLASSICS AMONG TRAILED HAY TEDDERS The system of trailed hay tedders has already successfully proven itself in the market for decades. With its TH 790 Hydro, TH 1100 Hydro and 1300 Hydro hay tedders, FELLA offers three fully developed machines for a wide range of applications, which can also be particularly recommended for use behind smaller tractors. Despite their enormous working width, these machines adapt themselves outstandingly well to uneven and hilly terrain. Convenient attachment to a tractor linkage drawbar or a hitch are also typical features of this model range, as is simple and safe handling out in the field. The switchover from working position to transport position is performed hydraulically, and conveniently, directly from the tractor with just one singleacting control unit. PERFECT WORKING CONDITIONS As with all FELLA hay tedders, the forage is picked up by the tines and turned gently without suffering damage. A light, loose and well mixed mat of forage is created, all of top quality. With the central edge spreading device which is fitted as standard, edges of fields no longer present any problems it s all high-quality forage down to the last blade of grass. Because of the spreading angle adjustment system, you can also optimally adapt your machine to the harvesting situation, whatever it is. TH 790 Hydro Machines for a wide range of applications Optimum ground contour following Top-level work quality convenience, pure and simple Edge spreading device fitted as standard Super C tines Transport position WE RECOMMEND: Night swathing gear box Electric lighting Spare wheel 16/6.50-6 10PR with super-balloon tyre

32 33 TRAILED HAY TEDDERS TH 1550 HYDRO TH 1800 HYDRO Enormous working width NEW DIMENSION IN TERMS OF AREA OUTPUT With their TH 1550 Hydro and TH 1800 Hydro, FELLA offer two trailed hay tedders which stand out from other machines due to their enormous working width. Attachment on these models is via the lower links. Despite their working width of 15 metres or 17.5 metres, these two models are very agile, which allows them to also be used cost-effectively on smaller areas of land. Area output and work quality which speak for themselves first-rate forage quality. Large area output PERFECT WORKING CONDITIONS As with all FELLA hay tedders, the forage is picked up by the tines and turned gently without suffering damage. A light, loose and well mixed mat of forage is created, representing top-quality forage material. Because of the spreading angle adjustment system, you can also always optimally adapt your machine to the harvesting situation, whatever it is. You can quite conveniently directly from the tractor seat use the hydraulic system to infinitely adjust the working height to changing working conditions. By using the two height-adjustable contact wheels, perfect ground adaptation of the machine is always ensured, which also reliably prevents your highquality forage from being contaminated. Due to the low centre of gravity and the additional mechanical locking of both centre axles, the machine is reliably prevented from slipping out of position during work on sloping ground. TH 1800 Hydro CONVENIENCE OF OPERATION WHICH SPEAKS FOR ITSELF The switchover from working position to transport position is performed synchronously via a hydraulic sequential control system, and conveniently from the tractor seat when the tractor is standing still. Because of the raised horizontal position of the tines, they are prevented from sinking into the ground and unintentionally collecting up forage during the switchover. Large working widths Very agile Optimal ground contour following excellent trailing behaviour Edge spreading device fitted as standard Super C tines Convenience, pure and simple WE RECOMMEND: Spare wheel 16/6.50-8 10PR with super-balloon tyre Wide angle PTO shaft Transport locking system Transport position

34 35 HAY TEDDER TECHNICAL SPECIFICATIONS TH 401 DS TH 431 D Hydro TH 601 D Hydro TH 4504 DN TH 5204 DN TH 6606 DN TH 7706 DN TH 8608 DN TH 800 Trans TH 901 Trans TH 1101 Trans TH 13010 Trans TH 540 T Hydro TH 790 TH 790 Hydro TH 1100 Hydro TH 1300 Hydro TH 1550 Hydro TH 1800 Hydro Dimensions and weight Approx. working width in m 4.00 4.30 5.70 4.50 5.20 6.60 7.70 8.60 7.70 8.60 10.20 12.70 5.20 7.70 7.70 10.20 12.70 15.00 17.50 Approx. transport width in m 2.33 2.44 2.55 2.65 3.00 2.90 3.00 2.90 2.90 3.00 3.00 3.00 2.96 2.78 2.80 2.78 2.78 2.80 2.80 Approx. parking height in m 2.13 2.36 3.00 2.40 2.60 3.30 3.65 3.30 2.90 2.80 3.04 2.70 2.67 Approx. transport length in m 1.57 1.88 2.10 2.10 2.25 2.10 2.45 2.25 4.48 4.40 4.78 5.60 3.16 5.59 5.54 6.83 8.07 9.05 10.30 Approx. weight in kg 305 385 498 574 606 822 946 1,172 1,237 1,608 1,676 2,000 555 790 890 1,090 1,305 1,860 2,038 Attachment Three-point KAT I + II KAT I + II KAT I + II KAT I + II KAT I + II KAT I + II KAT I + II KAT I + II Two-point lower links KAT II KAT II KAT II KAT II Linkage drawbar Towing jaw Power requirement Approx. power requirement 20/27 22/30 25/34 22/30 22/30 30/41 60/82 70/95 30/41 40/54 40/54 66/90 22/30 30/41 30/41 35/48 45/61 58/79 75/102 in kw/hp Rotors/tine arms Number of rotors 4 4 6 4 4 6 6 8 6 8 8 10 4 6 6 8 10 12 14 Number of tine arms per rotor 5 6 5 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 Edge spreading device Spread angle adjustment Overload protection Hydraulic control units Required hydraulic connections 1 x single-acting/ 1 x double-acting 1 x doubleacting 1 x doubleacting 2 x doubleacting 2 x doubleacting 2 x doubleacting Tyres, lighting Rotor chassis tyres 13/6.50-6 15/6.00-6 15/6.00-6 16/6.50-8 16/6.50-8 16/6.50-8 16/6.50-8 16/6.50-8 16/6.50-8 10PR 16/6.50-8 10PR 16/6.50-8 16/6.50-8 16/6.50-8 16/6.50-8 16/6.50-8 16/6.50-8 16/6.50-8 16/6.50-8 10PR 16/6.50-8 10PR Chassis tyres 215/65-15 10.0/80-12 10.0/80-12 10.0/75-15.3 Lighting equipment Warning signs Series Equipment variant not available Illustrations show some of the special equipment. The right to technical revision is reserved.

FELLA FOR YOU We can't change the weather, but we have the machines that can make the most of it in any conditions. Your FELLA team PHILOSOPHY For FELLA, close contact with its customers is very important. The experiences of farmers and agricultural contractors who use FELLA products is collected from the various markets around the world and is purposefully incorporated in the design of our products. PATENTS It is FELLA's objective to create ingenious and sustainable solutions for our products. This has already been well documented through numerous FELLA patents. SERVICE Out of sight, out of mind. But not at FELLA! Together with our dealers, we are always there and ready to provide reliable support to our partners, both at home and abroad as we have been now for almost 100 years. In conjunction with our well organised spare parts stores, regular further technical training for our dealers ensures that FELLA machines can be used, maintained and repaired to a professional standard. This comprehensive service ensures a high level of deployment reliability for your FELLA machines and makes a significant contribution to high-yield and stress-free forage harvesting.! Exceptionally wide range of mowers, hay tedders and swathers Innovation and progress: continuous further development for the best harvest Deployment reliability thanks to professional dealers and well organised spare parts stores Long service life machines Made in Germany

FELLA-Werke GmbH Fellastraße 1 3 D-90537 Feucht +49 9128 73-0 +49 9128 73-117 vertrieb@fella.eu www.fella.eu