Type of installation external motor Residential 391 24V 390 230V 390 24V 412 230V 413 230V 415 415 24V S418 402 422 422 PED. S450H Condominium 415 L 415 L 24V 422 422 PED. 400 S450H Industrial 400 Leaf max length (m) 2,50 3,00 3,00 1,80 2,50 3,00 3,00 2,30 1,80 (CBC) 1,80 (CBC- CBAC) 1,20 2,20 (CBC- CBAC- CBACR- CBACLN) 3,00 (SB) 4,00 (L) 4,00 (L) 3,00 (SBS) 3,00 (SB- SBS) 2,50 (SB LN) 4,00 (SB) 7,00 (SBS) underground motor Residential 770N 750 STD-CP S800H Condominium 750 STD-CP S800H Leaf max length (m) 3,50 1,80 (CBAC) 2,00 (CBAC) 2,50 (SB) 4,00 (SB- SBW) 3,50 (SBS) Max leaf weight (kg) 500 800 800 20
Automated systems for swing-leaf gates OTHER ACCESSORIES Key-operated push buttons page 166 Photocells and Columns page 171 Safety devices page 173 Flashing lamps page 174 Transmitters page 160 Various accessories page 175 21
391 Electro-mechanical operator with articulated arm 24V for residential swing-leaf gates with single-leaf max width of 2 m (2.5 m with the electric lock) Compact, elegant design. Width - the crucial overall dimension - is as little as 185 mm! Versatile, simple installation. The articulated arm allows high flexibility for the installation dimensions, enabling use also on large pillars. With the non-reversing operator, there is no need to install electro-mechanical closing devices. In case of a power cut, the rotation of the (key protected) release device alone, makes it possible to move the gate manually. Up to 2 m anti break-in non reversing capability. Built-in mechanical stops: no need to install opening and closing mechanical stops. New control unit with anti-crushing device and virtual encoder with reverse function upon detection of obstacle. Emergency battery to ensure operation in case of powercut (optional). GREENTECH System: 391 24V + E124 RESIDENTIAL IMPORTANT: to ensure correct operation, make sure that the distance between the gate hinge and any walls or lateral fencing is greater than 725 mm. DimensionS AND TECHNICAL SPECIFICATIONS OF 391 391E 391 Power supply 230 Vac / Electric motor 24 Vdc Absorbed power 120 W 40 W Max. torque 250 Nm Max. angular speed 13 sec Max. leaf length * 2.5 m Max. leaf weight ** See graph A * For leaves with a length exceeding 2 m, an electric lock must be fitted. ** The weight of the leaf depends on its length. On graph A, check if your leaf is in the zone shown in the graph. EXAMPLE OF A TYPICAL INSTALLATION 391E 391 Use frequency at 20 C 1:80 Consecutive cycles at 20 C 30 cycles/day Protection class IP 44 Operating ambient temperature -20 C to +55 C Weight 8.7 kg 7.0 kg Dimensions (L x D x H) in mm 185 x 260 x 310 2 3 4 1 A B 4 4 4 1 Ref. Q.ty Description Item code 1 Operator 391 E with control board 104576 and articulated arm 1 Operator 391 with articulated arm 104577 1 Receiver XF 433 319006 1 Two-channel transmitter XT2 433 SLH LR 787007 1 Flashing lamp FAACLIGHT 24 Vdc 410014 1 Pair of photocells XP 15 B 785149 1 Key-operated push-button T10 E 401019001/36 Low voltage cabling 1 cable 3x0,50 2 cables 2x0,50 1 cable 2x2,50 1 cable 2x1,50 Power cabling (230 V) 1 cable 2x1.5+T N.B.: Cable sections in mm 2 IMPORTANT: The configuration does not include the safety devices (i.e.: active or passive safety edges) that are to be determined according to the specific risk analysis of each installation (Ref.: UNI-EN 12445 and 12453 European Standards). The indicated price does not include the installation costs and the expenses for masonry, electrical and metalwork preparations. 22
391 Model Use Item code Single-leaf max. lenght (m) Use frequency (cycles/day) Control unit 391 E 2 m (2.5 with electric lock) 80 EO24S included 104576 391 2 m (2.5 with electric lock) 80 Not included 104577 The 391 E package includes: an electro-mechanical operator with built-in control board and transformer, an articulated arm, a release key. The 391 package includes: an electro-mechanical operator, an articulated arm, a release key. CONTROL UNITS Control unit E 024S with enclosure Technical specifications page 147 Item code 790286 SPECIFIC ACCESSORIES Faaclight Flashing lamp 24 Vdc Item code 410014 Control unit E 124 with enclosure Technical specifications page 148 Item code 790284 BUS XIB interface (if using E024S control board with non BUS photocells) Item code 790062 Emergency battery support kit* (only for E 124) Item code 390926 Receiving-transmitting module XCOM Item code 787150 XCOM BOX Module Item code 790061 Automated systems for swing-leaf gates Pair of straight arms Item code 738010 Plate for walling-in Item code 737403 Emergency battery kit XBAT 24 (not for E 124) Item code 390923 Receiver XF433 Mhz Receiver XF868 Mhz Item code XF433 319006 Item code XF868 319007 XK 21 L 24 V Burglar-resistant key-selector with lever release External release kit (only for XK 21 L 24 V) Item code 401301 Item code 424001 Graph A For a single-leaf gate, use a 391 E operator. For a double-leaf gate, use a 391 E operator and a 391 operator. IMPORTANT: Thanks to the new technologies, the E024S control board is compatible only with receiver XF 433/XF 868 (facility for a connector) and with the XP15 B ( bus connection) photocells. (*) The 2 Pb standard batteries are not supplied by FAAC. 12 V/4Ah needed. Dimensions: 90X70X108 mm OTHER ACCESSORIES Key-operated push buttons page 166 Photocells and Columns page 171 Safety devices page 173 Flashing lamps page 174 Transmitters page 160 Various accessories page 175 23
390 RESIDENTIAL Electro-mechanical operator with articulated arm 230V and 24V for residential swing-leaf gates with single-leaf width of 1.8 m (3 m with electric lock), for bi-folding doors with 1.5 m maximum width of single panel 24V SAFEzone System: 390 24V + E024S or E124 24V GREENTECH System: 390 24V + E124 230V GREENTECH System: 390 230V + E045 or E145 Non reversing operator, does not require electric lock up to 1.8 m. Maximum anti-crushing safety thanks to an exclusive electronic device. Emergency battery to ensure operation in case of powercut (optional). Option to add bus XIB interface for applications using no bus devices. IMPORTANT: to ensure correct operation, make sure that the distance between the gate hinge and the pillar edge is max 300 mm. DIMENSIONS AND TECHNICAL SPECIFICATIONS OF 390 230V AND 390 24V 390 390 24 Vdc 390 390 24 Vdc Power supply voltage 230 Vac (+6% -10%) Max. torque 250 Nm 200 Nm 24 Vdc 50 (60) Hz Thermal protection on motor winding 140 C - Absorbed power 280 W 40 W Operating ambient temperature -20 C +55 C Absorbed current 1,2 A 2 A Protection class IP 44 Motor rotation speed 960 r.p.m. Weight 11,5 kg Reduction ratio 1:700 Dimensions (L x D x H) in mm 410 x 130 x 130 Angle speed 8 /s 24
Model Use Control unit Item code Single-leaf max. width (m) 390-230V 1,80 (3 with electric lock) 390-24V 1,80 (3 with electric lock) The package 390-230V contains: an electro-mechanical operator, installation accessories, a thrust capacitor 8 µf 400 V, a release key. The package 390-24V contains: an electro-mechanical operator, installation accessories, a release key. EXAMPLE OF A TYPICAL INSTALLATION 390-230V Use frequency (cycles/hour) 15 Not included 104570 Continue use Not included 104573 Ref. Q.ty Description Item code 2 Operators 390-230V 104570 2 Articulated arms 738705 1 Flashing lamp Faaclight 230 V 410013 1 Key-operated push-button T10 E 401019001-36 1 Control board E045 790005 Automated systems for swing-leaf gates Low voltage cabling cable 3x0,50 cable 2x0,50 Power cabling (230 V) cable 3x1,50 +T cable 2x1,5 +T cable 2x1,5 1 Enclosure mod. E 720119 1 Receiver XF433 Mhz 319006 1 Pair of photocells XP 15 B 785149 1 Two-channel transmitter XT2 433 SLH LR 787007 EXAMPLE OF A TYPICAL INSTALLATION 390-24V Ref. Q.ty Description Item code Low voltage cabling cable 3x0,50 cable 2x0,50 cable 2x1,5 cable 2x2,50 Power cabling (24V) cable 2x1,5 +T 2 Operators 390-24 V 104573 2 Articulated arms 738705 1 Flashing lamp Faaclight 24 V 410014 1 Key-operated push-button T10 E 401019001-36 1 Electronic control board E 024S with enclosure 790286 1 Receiver XF433 Mhz 319006 1 Pair of photocells XP 15 B 785149 1 Two-channel transmitter XT2 433 SLH LR 787007 N.B.: Cable sections in mm 2 IMPORTANT: The configuration does not include the safety devices (i.e.: active or passive safety edges) that are to be determined according to the specific risk analysis of each installation (Ref.: UNI-EN 12445 and 12453 European Standards). The indicated price does not include the installation costs and the expenses for masonry, electrical and metalwork preparations. 25
390 RESIDENTIAL CONTROL UNITS 230V Control board 455 D (Discontinuing) Technical specifications page 144 Control board E045 Technical specifications page 145 Control board E145 Technical specifications page 146 Item code 790917 Item code 790005 Item code 790006 ACCESSORIES FOR 230V Enclosure mod. L for control boards Item code 720118 Enclosure mod. E for control boards Item code 720119 Enclosure mod. LM for control boards Item code 720309 CONTROL UNITS 24V Control board E 024S with enclosure technical specification page 147 Item code 790286 Control board E 124 with enclosure technical specification page 148 Item code 790284 ACCESSORIES FOR 24V Emergency battery kit XBAT 24 (not compatible with E 124) Emergency battery support kit (specific for E 124)*** Item code 390923 Item code 390926 26
COMMON ACCESSORIES FOR BOTH OPERATORS Articulated arm Item code 738705 XK21L 24 V - Burglar-resistant key-selector with lever release Item code 401301 Telescopic arm (application for folding doors) Item code 738706 BUS XIB interface (in case you use E024S or E045 with non bus photocells) Item code 790062 External release device with cable and sheath* Length 5 m Item code 401057 Receiving/transmitting module X-COM Item code 787150 Single limit switch kit (opening or closing)** Item code 390682 Module X-COM BOX Item code 790061 Automated systems for swing-leaf gates * To be used with key-operated push-buttons XK21 L24V or T21 EF or T21 IF (see page 166). ** The operators 390 and 390 24V can be equipped with an opening and closing travel limit device. For 390 with electronic limit devices E145 or 455D control panels must be used, while for 390 24V E124 control panel must be used. *** The 2 standard lead batteries are not supplied by FAAC and must have current / voltage 12V/4Ah. Dimensions: 90x70x108 mm. IMPORTANT: The operator 390 must be provided with an articulated arm (swing leaf gate) or with a telescopic arm (for folding doors). OTHER ACCESSORIES Key-operated push buttons page 166 Photocells and Columns page 171 Safety devices page 173 Flashing lamps page 174 Transmitters page 160 Various accessories page 175 27
412 RESIDENTIAL Electro-mechanical operator 230V for swing-leaf gates with single-leaf width of 1.8 m SAFEzone System: 412 + E045 or E145 + SAFEcoder Non reversing operator, does not require electric lock. Applications with lower manoeuvring intensity. Simplified installation and maintenance. Anti-crushing safety thanks to the electronic device. GREENTECH System: 412 + E045 or E145 DIMENSIONS AND TECHNICAL SPECIFICATIONS OF 412 Power supply voltage 230 Vac (+6% -10%) 50 (60) Hz Absorbed power 280 W Absorbed current 1.5 A Motor rotation speed 1400 r.p.m. Rod extension speed 1.5 cm/s Rod stroke 290 mm Traction and thrust force 0 to 320 dan Thermal protection on motor winding 140 C Operating ambient temperature -20 C to +55 C Protection class IP 44 Weight 6.5 kg Dimensions (L x D x H) in mm 1000 x 90 x 195 EXAMPLE OF A TYPICAL INSTALLATION 28 Low voltage cabling 3 cables 3x0.50 1 cable 2x0.50 Power cabling (230 V) 2 cables 3x1.50+T 1 cable 2x1.5+T 1 cable 2x1.5 N.B.: Cable sections in mm 2 Ref. Q.ty Description Item code 1 Operator 412 RH 104470 1 Operator 412 LH 104471 1 Control board 452 MPS 790916 1 Enclosure mod. E 720119 1 Receiver board RP 433 SLH 787824 1 Two-channel transmitter XT2 433 SLH LR 787007 1 Flashing lamp FAACLIGHT 410013 1 Pair of photocells SAFEBEAM 785165 1 Key-operated push-button T10 E 401019001/36 IMPORTANT: The configuration does not include the safety devices (i.e.: active or passive safety edges) that are to be determined according to the specific risk analysis of each installation (Ref.: UNI-EN 12445 and 12453 European Standards). The indicated price does not include the installation costs and the expenses for masonry, electrical and metalwork preparations.
412 Model Use Item code Single-leaf max. width (m) Use frequency (cycles/hour) 412 RH 1.80 18 104470 412 LH 1.80 18 104471 The package contains: an electro-mechanical operator (RH or LH), installation accessories, a release key, a thrust capacitor 8 µf 400 V. CONTROL UNITS Control board 455 D (Discontinuing) Technical specifications page 144 Item code 790917 Control board E045 Technical specifications page 145 Item code 790005 Control board E145 Technical specifications page 146 Item code 790006 Automated systems for swing-leaf gates Enclosure mod. L for control boards Enclosure mod. E for control boards Enclosure mod. LM for control boards Item code 720118 Item code 720119 Item code 720309 SPECIFIC ACCESSORIES Plate for walling-in Extra release key Safe coder for 412 operator (Faac patent) NEWS Item code 737604 Item code 713009 Item code 404041 The right leaf version (RH and LH) can be determined by looking from the inside of the property. OTHER ACCESSORIES Key-operated push buttons page 166 Photocells and Columns page 171 Safety devices page 173 Flashing lamps page 174 Transmitters page 160 Various accessories page 175 29
413 Electro-mechanical operator 230V for residential swing-leaf gates with single-leaf max width of 1.8 m (2.5 m with electric lock) RESIDENTIAL 230V SAFEzone System: 413 230V + E045 or E145 + SAFEcoder 230V GREENTECH System: 413 230V + E045 or E145 Off axis thrust operator. Integrated opening and closing mechanical stops (the travel limit mechanical stops need not be installed). Die-cast aluminium body, entirely double-coat painted for longer life. Manual release device with simplified key-protected activation. 24 V dc power supply to travel limit devices (if present) for maximum safety, with facility for controlling travel limit stops and slow-down. Horizontal exit for cables to allow near to ground installation (low installation). Designed for use with the Gatecoder obstacle detection device. DIMENSIONS AND TECHNICAL SPECIFICATIONS OF 413-413 LS 413 413 LS Power supply 230 Vac Power 250 W Current 1.1 A Thermal protection 140 C Capacitor 6.3 µf Thrust 200 dan Rod stroke 300 mm (350 mm without mechanical stops) Rod extension speed 1.6 cm/sec (*) Use of the electric lock is recommended over 1.80 m EXAMPLE OF A TYPICAL INSTALLATION 413 413 LS Leaf max. width (*) 2.5 m Type and frequency of use at 20 C S3-30% S3-35% Indicative minimum hourly cycles at 20 C ~30 Operating ambient temperature -20 C to +55 C Weight of operator 6.5 kg Dimensions (L x D x H) in mm 785 x 105 x 148 Protection class IP 44 Travel limit microswitches NO YES Opening and closing mechanical stops YES Low voltage cabling 3 cables 3x0.50 1 cable 2x0.50 Ref. Q.ty Description Item code 2 Operator 413 104413 1 Control board 452 MPS 790916 1 Enclosure mod. E 720119 1 Receiver board RP 433 SLH 787824 1 Two-channel transmitter XT2 433 SLH LR 787007 1 Flashing lamp FAACLIGHT 410013 1 Pair of photocells SAFEBEAM 785165 1 Key-operated push-button T10 E 401019001/36 30 Power cabling (230 V) 2 cables 3x1.50+T 1 cable 2x1.5+T 1 cable 2x1.5 N.B.: Cable sections in mm 2 IMPORTANT: The configuration does not include the safety devices (i.e.: active or passive safety edges) that are to be determined according to the specific risk analysis of each installation (Ref.: UNI-EN 12445 and 12453 European Standards). The indicated price does not include the installation costs and the expenses for masonry, electrical and metalwork preparations.
Model Use Equipment Item code Single-leaf max. width (m) Use frequency (cycles/hour) electronic 413-230V 1,80 (2,5 with electric lock) 30 Not included 104413 413 LS - 230V 1,80 (2,5 with electric lock) 35 Not included 104414 The package contains: one electro-mechanical operator, installation accessories, a release key, a thrust capacitor 6.3µF 400V. The LS version includes the electronic limit switches. CONTROL UNITS Control board 455 D (Discontinuing) Technical specifications page 144 Item code 790917 Control board E045 Technical specifications page 145 Item code 790005 Control board E145 Technical specifications page 146 Item code 790006 ACCESSORIES Enclosure mod. L for control boards Item code 720118 Automated systems for swing-leaf gates NEWS Enclosure mod. E for control boards Enclosure mod. LM for control boards SAFEcoder absolute encoder Magnetic bus (Patent FAAC) XK 21 L 24V Burglar-resistant keyselector with lever release Item code 720119 Item code 720309 Item code 404040 Item code 401301 BUS interface XIB (if you use E045 board with photocell BUS) X-COM transceiver module Modulo X-COM BOX Plate for walling-in Item code 790062 Item code 787150 Item code 790061 Item code 737604 To manage the 230V operators with limit switch (LS Mod) you must use the control board 455D or E145. OTHER ACCESSORIES Key-operated push buttons page 166 Photocells and Columns page 171 Safety devices page 173 Flashing lamps page 174 Transmitters page 160 Various accessories page 175 31
415 RESIDENTIAL Electro-mechanical operator 230V and 24V for residential swing-leaf gates with single-leaf max width of 2,5 m (415) and 3 m (415L) - 3 m and 4 m respectively with electric lock 24V SAFEzone System: 415 24V + E024S or E124 230V SAFEzone System: 415 230V + E045 or E145 + SAFEcoder 24V GREENTECH System: 415 24V + E124 230V GREENTECH System: 415 230V + E045 or E145 In-axis thrust operator. Available in versions with a 300 mm (max leaf 3 m) and 400 mm (max leaf 4 m) rod stroke. Available in versions with/without a travel limit device. Die-cast aluminium body, entirely double-coat painted for longer life. Manual release device with simplified key-protected activation. 24 Vdc power supply to travel limit devices (if present) for maximum safety, with facility for controlling travel limit stops and slow-down. Horizontal exit for cables to allow near to ground installation (low installation). Emergency battery to ensure operation in case of powercut (optional 24V). DIMENSIONS AND TECHNICAL SPECIFICATIONS OF 415-230V 415 415 LS 415 L 415 L LS Power supply 230 Vac Power 300 W Current 1.3 A Thermal protection 140 C Capacitor 8 µf Thrust 300 dan Rod stroke 300 mm 400 mm Rod extension speed 1.6 cm/sec 415 415 LS 415 L 415 L LS Leaf max. width (*) 3 m* 4 m** Type and frequency of use at 20 C S3-30% S3-35% S3-30% S3-35% Indicative minimum hourly cycles at 20 C ~30 ~25 Operating ambient temperature -20 C to +55 C Weight of operator 7.8 Kg 8 Kg Dimensions (L x D x H) in mm 835 x 105 x 148 940 x 105 x 148 Protection class IP 54 Travel limit microswitches NO YES NO YES DIMENSIONS AND TECHNICAL SPECIFICATIONS OF 415-24 V 415 415 LS 415 L 415 L LS 415 415 LS 415 L 415 L LS Power supply 24 Vdc Type and frequency of use at 20 C Continuous use Power 70 W Cycles per hour max. indicative at 20 C ~30 ~25 Current 3 A Operating ambient temperature -20 C +55 C Thrust 280 dan actuator weight 7,8 Kg 8 Kg Stem travel 300 mm 400 mm Dimensions (W x D x H) in mm 835 x 105 x 148 940 x 105 x 148 Rod speed 1,6 cm/sec Protection class IP 54 Leaf width max. (*) 3 m* 4 m** Limit switches NO YES NO YES (*) Use of the electric lock is recommended over 2.5 m. (**) Use of the electric lock is recommended over 3 m. 32
Model Use Equipment Item code Single-leaf max. width (m) Use frequency (cycles/hour) electronic 415 2,5 (3 m with electric lock) 30 Not included 104415 415 LS 2,5 (3 with electric lock) 35 Not included 104416 415 L 3,0 (4 m with electric lock) 25 Not included 104417 415 L LS 3,0 (4 m with electric lock) 25 Not included 104418 415-24V 2,5 (3 m with electric lock) continuous use Not included 1044151 415 LS - 24V 2,5 (3 m with electric lock) continuous use Not included 1044161 415 L - 24V 3 (4 m with electric lock) continuous use Not included 1044171 415 L LS - 24V 3 (4 m with electric lock) continuous use Not included 1044181 The package includes: an electromechanical actuator, installation accessories, a release key, a thrust capacitor 8μF 400V. The LS version includes the electrical limit switches. EXAMPLE OF A TYPICAL INSTALLATION 415-230V Ref Q.ty Description Item code 2 Actuators 415 104415 1 Flashing FAACLIGHT 230 V 410013 1 Key switch T10 E 401019001-36 1 Electronic card E045 790005 1 Enclosure mod. And for electronic boards 720119 Automated systems for swing-leaf gates Low voltage cabling cable 3x0,50 cable 2x0,50 Power cabling (230 V) cable 3x1,50+T cable 2x1,5+T cable 2x1,5 1 Receiver XF433 MHz 319006 1 Pair of photocells XP 15 B 785149 1 2 channels transmitter XT2 433 SLH LR 787007 EXAMPLE OF A TYPICAL INSTALLATION 415-24V Ref Q.ty Description Item code 2 Actuators 415 to 24 V 1044151 1 Flashing FAACLIGHT 24 V 410014 1 Key switch T10 E 401019001-36 1 Unit E 024S with container 790286 1 Receiver XF433 MHz 319006 1 Pair of photocells XP 15 B 785149 1 2 channels transmitter XT2 433 SLH LR 787007 Low voltage cabling cable 3x0,50 cable 2x0,50 cable 2x1,5 cable 2x2,50 Power cabling (230 V) cable 2x1,5 +T N.B.: Cable sections in mm 2 IMPORTANT: The configuration does not include the safety devices (i.e.: active or passive safety edges) that are to be determined according to the specific risk analysis of each installation (Ref.: UNI-EN 12445 and 12453 European Standards). The indicated price does not include the installation costs and the expenses for masonry, electrical and metalwork preparations. 33
415 RESIDENTIAL CONTROL BOARDS FOR 230V Control board 455 D (Discontinuing) Technical specifications page 144 Control board E045 Technical specifications page 145 Control board E145 Technical specifications page 146 Item code 790917 Item code 790005 Item code 790006 ACCESSORIES FOR 230V NEWS Enclosure mod. L for control boards Enclosure mod. E for control boards Enclosure mod. LM for control boards SAFEcoder absolute encoder Magnetic bus (Patent FAAC) Item code 720118 Item code 720119 Item code 720309 Item code 404040 CONTROL BOARDS FOR 24V Control unit E 124 with enclosure Tech. specifications page 148 Control unit E 024S with enclosure Tech. specifications page 147 Item code 790284 Item code 790286 ACCESSORIES FOR 24V Emergency battery kit XBAT 24 (not compatible with E 124) Battery support kit Emergency * (specific for E 124) Item code 390923 Item code 390926 34
COMMON ACCESSORIES FOR BOTH OPERATORS XK 21 L 24V burglar-resistant key-selector with lever release Item code 401301 Plate for walling-in Item code 737604 BUS interface XIB (if you use E024S or E045 board with non photocell BUS) Item code 790062 Rod cover for mod. 415 and mod. 415 LS (rod stroke 300 mm) Item code 727525 X-COM receiving-transmitting module Item code 787150 Module X-COM BOX Item code 790061 Automated systems for swing-leaf gates To manage the actuators with limit switch (LS Mod) you must use the electronic control board 455 D or E145 for 230V versions or E124 for 24V versions. * The 2 standard lead batteries are not supplied by FAAC and must have current / voltage 12V/4Ah. Dimensions: 90x70x108 mm OTHER ACCESSORIES Key-operated push buttons page 166 Photocells and Columns page 171 Safety devices page 173 Flashing lamps page 174 Transmitters page 160 Various accessories page 175 35
S418 Electro-mechanical operator 24V for residential swing-leaf gates with single-leaf max width of 2.3 m (2.7 m with electric lock) RESIDENTIAL SAFEzone System: S418 + E024S or E124 GREENTECH System: S418 + E124 Opening and closing mechanical stops. Effective stroke 350 mm. New "multi-position" fixing bracket for non-welded installation. New control unit with anti-crushing device and virtual encoder with reverse function upon detection of obstacle. DIMENSIONS AND TECHNICAL SPECIFICATIONS OF S418-24 Vdc Power supply 24 Vdc Leaf max. width 2,7 m* Power 35 W Operating ambient temperature -20 C +55 C Current 1.5 A Weight 6 kg Max. thrust** 180 dan Dimensions (L x D x H) in mm 825x104x125 Rod stroker 350 mm (390 mm without mechanical stops) Protection class IP 54 Rod extension speed 1.8 cm/s Travel limit microswitches NO Opening and closing mechanical stops YES (*) use of the electric lock is compulsory over 2.30 m to guarantee the automatic block (**) with board E124. EXAMPLE OF A TYPICAL INSTALLATION Ref Q.ty Description Item code 2 Operators S418-24 Vdc 104301 1 Control unit E 024S with enclosure 790286 1 Frequency module XF 433 319006 1 Two-channel transmitter XT2 433 SLH LR 787007 1 Flashing lamp FAACLIGHT 24 Vdc 410014 1 Pair of photocells XP 15B 785149 1 Key-operated push-button T10 E 401019001/36 Low voltage cabling 3 cables 3x0.50 1 cable 2x0.50 36 Power cabling (230 V) 2 cables 3x1.50+T 1 cable 2x1.5+T 1 cable 2x1.5 N.B: Cable sections are in mm 2 IMPORTANT: The configuration does not include the safety devices (i.e.: active or passive safety edges) that are to be determined according to the specific risk analysis of each installation (Ref.: UNI-EN 12445 and 12453 European Standards). The indicated price does not include the installation costs and the expenses for masonry, electrical and metalwork preparations.
S418-24 Vdc Model Use Control unit Item code Single leaf max. width (m) S418-24 Vdc 2.3 (2.7 with electric lock) The packages include: an electro-mechanical operator, installation accessories, release key. CONTROL UNITS Control unit E 024S with enclosure Tech. specifications page 147 Item code 790286 SPECIFIC ACCESSORIES Frequency of use (%) Continuous use Not included 104301 Control unit E 124 with enclosure Tech. specifications page 148 Item code 790284 Emergency battery kit XBAT 24 (not for E 124) Item code 390923 Automated systems for swing-leaf gates Emergency battery support kit (*) (only for E 124) BUS XIB interface (if E024S board is used with non BUS photocells) Receiving-transmitting module X-COM X-COM BOX module Item code 390926 Item code 790062 Item code 787150 Item code 790061 (*) The 2 standard Pb batteries are not supplied by FAAC. Voltage/current of 12 V/4Ah needed. Dimensions: 90x70x108 mm. OTHER ACCESSORIES Key-operated push buttons page 166 Photocells and Columns page 171 Safety devices page 173 Flashing lamps page 174 Transmitters page 160 Various accessories page 175 37
402 Hydraulic operator 230V for residential swing-leaf gates with single-leaf max width of 1.8 m (402 CBC) and 3 m (402 SBS) RESIDENTIAL SAFEzone System: 402 + E045 or E145 + SAFEcoder GREENTECH System: 402 + E045 or E145 Highly compact, ideal for installations where space is at a premium. Anti-corrosion cover with high weather resistance. Versions CBC (with closing block) and SBS (without slow block). DIMENSIONS AND TECHNICAL SPECIFICATIONS OF 402 402 CBC 402 SBS Power supply voltage 230 Vac 50 (60) Hz Absorbed power 220 W Absorbed current 1 A Motor rotation speed 1400 r.p.m. Rod extension speed 1.3 cm/s 1 cm/s Pump flow rate 1 l/min 0.75 l/min Traction and thrust force 0 to 500 dan 0 to 690 dan 402 CBC 402 SBS Operating ambient temperature -20 C to +55 C Thermal protection on motor winding 120 C Weight 6.5 kg Type of oil FAAC HP OIL Protection class IP 55 Dimensions (L x D x H) in mm 959 x 85 x 61 EXAMPLE OF A TYPICAL INSTALLATION Ref. Q.ty Description Item code 2 Operator 402 CBC 104468 1 Control board 452 MPS 790916 1 Enclosure mod. E 720119 1 Receiver board RP 433 SLH 787824 1 Two-channel transmitter XT2 433 SLH LR 787007 1 Flashing lamp FAACLIGHT 410013 1 Pair of photocells SAFEBEAM 785165 1 Key-operated push-button T10 E 401019001/36 Low voltage cabling 3 cables 3x0.50 1 cable 2x0.50 38 Power cabling (230 V) 2 cables 3x1.50+T 1 cable 2x1.5+T 1 cable 2x1.5 N.B.: Cable sections in mm 2 IMPORTANT: The configuration does not include the safety devices (i.e.: active or passive safety edges) that are to be determined according to the specific risk analysis of each installation (Ref.: UNI-EN 12445 and 12453 European Standards). The indicated price does not include the installation costs and the expenses for masonry, electrical and metalwork preparations.
402 Model Use Item code Single-leaf max. width (m) Use frequency (cycles/hour) 402 CBC 1.80 55 104468 402 SBS 3.00 55 104474 The 402 CBC package includes: a hydraulic operator with closing hydraulic block, installation accessories, a triangular release key, a thrust capacitor 8 µf 400 V. The 402 SBS package includes: a hydraulic operator without closing hydraulic block, installation accessories, a triangular release key, a thrust capacitor 8 µf 400 V. CONTROL UNITS Control board 455 D (discontinuing) Technical specifications page 144 Item code 790917 Control board E045 Technical specifications page 145 Item code 790005 Control board E145 Technical specifications page 146 Item code 790006 Automated systems for swing-leaf gates Enclosure mod. L for control boards Item code 720118 Enclosure mod. E for control boards Item code 720119 Enclosure mod. LM for control boards Item code 720309 SPECIFIC ACCESSORIES NEWS Plate for walling-in Extra triangular release key SAFEcoder absolute encoder Magnetic bus (Patent FAAC) Union for sheath RTA Item code 737604 Item code 713002 Item code 404040 Item code 710010 An electric lock should be installed for operators without a block facility. OTHER ACCESSORIES Key-operated push buttons page 166 Photocells and Columns page 171 Safety devices page 173 Flashing lamps page 174 Transmitters page 160 Various accessories page 175 39
S450H RESIDENTIAL CONDOMINIUM Hydraulic operator 24 V for residential and condominium swing-leaf gates with single leaf max. width of 3 m (SB) and 2 m (CBAC) SAFEzone System: S450H + E024S or E124 GREENTECH System: S450H + E124 Hybrid technology Integrated encoder with anti-crushing function and reverse upon detection of obstacle Useful stroke 311 mm New multi-position fixing bracket for non-welded applications Opening/Closing mechanical stops standard supplied DIMENSIONS AND TECHNICAL SPECIFICATIONS S450H 24 Vdc Power supply 230 Vac Frequency of use continuous use Electric motor 24 Vdc Operating ambient temperature -20 C to +55 C Power 60 W Weight 6,5 kg Current 7 A Type of oil FAAC HP OIL Max. thrust* >500 da N Protection class IP 55 Rod stroke 311 mm Dimensions (L x D x H) in mm 1113x85x119 Max. rod extension speed (adjustable)* >2,5 cm/s. (*) With board E124. EXAMPLE OF A TYPICAL INSTALLATION 5 Ref Q.ty Description Item code 2 Operator S450H 104100 1 Control unit EO24S 790286 with enclosure 1 Frequency module XF 433 319006 1 Two-channel transmitter XT2 433 SLH LR 787007 1 FAACLIGHT flashing lamp 24 Vdc 410014 1 Pair of photocells XP15B 785149 1 Key-operated push-button T10E 401019001/36 Low voltage cabling 1 cable 2x0.75 2 cables 2x0.75 1 cable 2x0.50 1 cable 3x0.75 Power cabling (230V) 1 cable 2x1.5+T N.B.: Cable sections in mm 2 IMPORTANT: The configuration does not include the safety devices (i.e.: active or passive safety edges) that are to be determined according to the specific risk analysis of each installation (Ref.: UNI-EN 12445 and 12453 European Standards). The indicated price does not include the installation costs and the expenses for masonry, electrical and metalwork preparations. 40
S450H - 24 V dc Model Use Control Item code Single leaf Frequency unit max. width (m) of use (%) S450H CBAC 2 Continuous use Not included 104100 S450H SB 3 Continuous use Not included 104101 The packages include: a hydraulic operator, installation accessories, a release key. Control units Control unit E 024S Tech. specifications page 147 Item code 790286 SPECIFIC ACCESSORIES Control unit E 124 Tech. specifications page 148 Item code 790284 Emergency battery kit XBAT 24 (not for E 124) Item code 390923 Automated systems for swing-leaf gates Emergency battery support kit (*) (only for E 124) BUS XIB interface (if E024S board is used with non-bus photocell) Receiving-transmitting module X-COM X-COM BOX module Item code 390926 Item code 790062 Item code 787150 Item code 790061 Release lock with customised key from no. 1 to no. 36 Item code 712501001 to 712501036 Union for sheath RTA Item code 710010 (*) The 2 standard Pb batteries are not supplied by FAAC. Voltage/current of 12V/4Ah needed. Dimensions: 90x70x108mm OTHER ACCESSORIES Key-operated push buttons page 166 Photocells and Columns page 171 Safety devices page 173 Flashing lamps page 174 Transmitters page 160 Various accessories page 175 41
422-422 ped. RESIDENTIAL CONDOMINIUM Hydraulic operator 230V for residential and condominium swing-leaf gates with single-leaf max width of 1.8 m (422 CBC-CBCS-CBAC-CBACS) and 3 m (422 SB-SBS) with single pedestrian leaf width from 0.8 m to 1.2 m (422 PED CBC-SB) SAFEzone System: 422 + E045 or E145 + SAFEcoder GREENTECH System: 422 + E045 or E145 A wide versatile range. Anti-corrosion cover with high weather resistance. Key protected, release device. DIMENSIONS AND TECHNICAL SPECIFICATIONS OF 422-422 ped. 422 CBC 422 CBAC 422SB 422 CBCS 422 CBACS 422 SBS 422 PED. CBC 422 PED. SB Power supply voltage 230 Vac (+6% -10%) 50 (60) Hz Absorbed power 220 W Absorbed current 1 A Motor rotation speed 1400 r.p.m. Rod extension speed 1.3 cm/s 1 cm/s 2 cm/s Pump flow rate 1 l/min 0.75 l/min 1.5 l/min Traction and thrust force 0 to 500 dan 0 to 690 dan 0 to 380 dan Operating ambient temperature -20 C to +55 C Thermal protection on motor winding 120 C Weight 7 kg Type of oil FAAC HP OIL Protection class IP 55 Dimensions (L x D x H) in mm 987 x 120 x 85 mm - pedestrian 827 x 120 x 85 mm EXAMPLE OF A TYPICAL INSTALLATION Ref. Q.ty Description Item code 2 Operator 422 CBCS 104208 1 Control board 452 MPS 790916 1 Enclosure mod. L 720118 1 Receiver board RP 433 SLH 787824 1 Two-channel transmitter XT2 433 SLH LR 787007 1 Flashing lamp FAACLIGHT 410013 1 Pair of photocells SAFEBEAM 785165 1 Key-operated push-button T10 E 401019001/36 Low voltage cabling 3 cables 3x0.50 1 cable 2x0.50 Power cabling (230 V) 2 cables 3x1.50+T 1 cable 2x1.5+T 1 cable 2x1.5 N.B.: Cable sections in mm 2 IMPORTANT: The configuration does not include the safety devices (i.e.: active or passive safety edges) that are to be determined according to the specific risk analysis of each installation (Ref.: UNI-EN 12445 and 12453 European Standards). The indicated price does not include the installation costs and the expenses for masonry, electrical and metalwork preparations. 42
422-422 ped. Model Use Item code Single-leaf max. width (m) Use frequency (cycles/hour) 422 CBCS 1.80 55 104208 422 CBACS 1.80 55 104209 422 SBS 3.00 55 104210 422 CBC 1.80 55 104211 422 CBAC 1.80 55 104200 422 SB 3.00 55 104212 422 PED. CBC 1.20 (min 0.80) 70 104213 422 PED. SB 1.20 (min 0.80) 70 104214 The 422 packages contain: a hydraulic operator with closing hydraulic block (422 CBC-CBCS), with opening/closing hydraulic block (422 CBAC-CBACS), without block (422 SB-SBS), installation accessories, a release key, a thrust capacitor 8 µf 400 V. The 422 PEDESTRIAN CBC-SB packages contain: a hydraulic operator for pedestrian crossings with hydraulic block at closure (422 PED.CBC), without hydraulic block (422 PED. SB), installation accessories, a release key, a thrust capacitor 8 µf 400 V. CONTROL UNITS Control board 455 D (Discontinuing) Technical specifications page 144 Enclosure mod. LM for control boards Item code 720309 Enclosure mod. L for control boards Item code 720118 Control board E045 Technical specifications page 145 Control board E145 Technical specifications page 146 Automated systems for swing-leaf gates Item code 790917 Enclosure mod. E for control boards Item code 720119 Item code 790005 Item code 790006 SPECIFIC ACCESSORIES NEWS Plate for walling-in Release lock with customised key from no. 1 to no. 36 SAFEcoder absolute encoder Magnetic bus (Patent FAAC) Union for sheath RTA Item code 737604 Item code 712501001 to 712501036 Item code 404040 Item code 710010 An electric lock should be installed for operators without a block facility. OTHER ACCESSORIES Key-operated push buttons page 166 Photocells and Columns page 171 Safety devices page 173 Flashing lamps page 174 Transmitters page 160 Various accessories page 175 43
400 RESIDENTIAL CONDOMINIUM Hydraulic operator 230V for condominium and industrial swing-leaf gates SAFEzone System: 400 + E045 or E145 + SAFEcoder GREENTECH System: 400 + E045 or E145 Wide and versatile range for heavy industrial gates or gates with high use frequency Hydraulic block resistant to intrusion attempts (mod. CBC CBAC) Very silent movement Key-protected release device DIMENSIONS AND TECHNICAL SPECIFICATIONS OF 400 400 CBC 400 CBAC 400 SB 400 SBS 400 CBACR 400CBAC LN 400 SB LN Power supply voltage 230 Vac (+6% -10%) 50 (60) Hz Absorbed power 220 W Absorbed current 1 A Motor rotation speed 1400 r.p.m. Rod extension speed 1 cm/s 0.75 cm/s 1.5 cm/s Pump flow rate 1 l/min 0.75 l/min 1.5 l/min Traction and thrust force 0 to 620 dan 0 to 775 dan 0 to 465 dan Operating ambient temperature -20 C to +55 C Thermal protection on motor winding 120 C Weight 8.6 kg 10 kg Type of oil FAAC HP OIL Protection class IP 55 Dimensions (L x D x H) in mm 1,031 x 113 x 85 mm - long version 1,285 x 113 x 85 mm EXAMPLE OF A TYPICAL INSTALLATION 5 Low voltage cabling 3 cables 3x0.50 1 cable 2x0.50 Power cabling (230 V) 2 cables 3x1.50+T 1 cable 2x1.5+T 1 cable 2x1.5 Ref. Q.ty Description Item code 1 Operator 400 SBS 104203 1 Control board 452 MPS 790916 1 Enclosure mod. L 720118 1 Receiver RP 433 SLH 787824 1 Two-channel transmitter XT2 433 SLH LR 787007 1 Flashing lamp FAACLIGHT 410013 2 Pair of FOTOSWITCH photocells 785152 2 Aluminium columns for FOTOSWITCH 401028 2 Foundation plates for columns 737630 1 Key-operated push-button T10 401010001/36 3 Plastic enclosure to be walled in 720086 1 Electric lock 712650+ 712651001/36+ 712652001/36 1 Pillar mounted counter strike 712990 N.B.: Cable sections in mm 2 IMPORTANT: The configuration does not include the safety devices (i.e.: active or passive safety edges) that are to be determined according to the specific risk analysis of each installation (Ref.: UNI-EN 12445 and 12453 European Standards). The indicated price does not include the installation costs and the expenses for masonry, electrical and metalwork preparations. 44
400 Model Use Item code Single-leaf max. width (m) Use frequency (cycles/hour) Control unit 400 CBC 2.20 70 Not included 104205 400 SB 4.00 70 Not included 104206 400 SBS 7.00 60 Not included 104203 400 CBAC 2.20 70 Not included 104201 400 CBACR 2.20 80 Not included 104207 400 CBAC long 2.20 50 Not included 104202 400 SB long 2.50 50 Not included 104204 The 400 packages contain: a hydraulic operator with closing hydraulic block (400 CBC), without hydraulic block (400 SB and SB LN), without hydraulic block for heavy or panelled leaves (400 SBS), a hydraulic operator with hydraulic block at opening/closing (400 SBAC and CBAC LN), a hydraulic operator with hydraulic block at opening and closure, with faster activation speed (400 CBACR), installation accessories, a release key, a thrust capacitor 8 µf 400 V. CONTROL UNITS Enclosure mod. L for control boards Item code 720118 Control board 455 D (Discontinuing) Technical specifications page 144 Item code 790917 Enclosure mod. E for control boards Item code 720119 Enclosure mod. LM for control boards Item code 720309 Control board E045 Technical specifications page 145 Item code 790005 Control board E145 Technical specifications page 146 Item code 790006 Automated systems for swing-leaf gates SPECIFIC ACCESSORIES NEWS Union for sheath RTA Plate for walling-in Release lock with customised key from no. 1 to no. 36 SAFEcoder absolute encoder Magnetic bus (Patent FAAC) Item code 710010 Item code 737604 Item code 712501001 to 712501036 Item code 404040 FIG. 1 d 80 mm < d < 150 mm Positive Stop - mechanical stops at opening/closing (can be integrated on the 400 mod.) Positive Stop - mechanical stops at opening/closing (can be integrated on the long 400 mod.) Item code 490042 Item code 490043 An electric lock should be installed for operators without a block facility. Use the 400 long models to avoid niches on the masonry pilasters (FIG.1). The operator with block facility is not recommended when there is no access to the manual release device (panelled leaves or no other access to the property). OTHER ACCESSORIES Key-operated push buttons page 166 Photocells and Columns page 171 Safety devices page 173 Flashing lamps page 174 Transmitters page 160 Various accessories page 175 45
770N Underground electro-mechanical operator 230V and 24V for residential swing-leaf gates with single-leaf width of 3.50 m and max weight of 500 kg See graph on page 45 RESIDENTIAL 24V SAFEzone System: 770 24V+ E024S or E124 230V SAFEzone System: 770 230V + E045 or E145 + SAFEcoder 24V GREENTECH System: 770 24V + E124 230V GREENTECH System: 770 230V + E045 or E145 Invisible operator Ability to access the operator without removing the leaf Protection class IP 67 Irreversible (230V) New electronic control with anti-crushing device and virtual encoder inversion on obstacles (24V) Emergency battery for operation in the absence of voltage (24V optional). DIMENSIONS AND SPECIFICATIONS 770N 230V AND 24V 770N 230V 770N 24V Reduction ratio 1:1418 Power supply 230 Vac (+6%-10%) 50 Hz 24 Vdc Power Consumption 380 W 70 W Current consumption 1,7 A 3 A Thermal protection on motor 140 C - Max torque 330 Nm 300 Nm (770 N 330 Nm) Angular speed 6 /sec Type and frequency of use at 20 C S3-30% 100% Max opening angle door 110 (140 and 180 with optional kit) Maximum leaf width 3.5 m (110 ), 3 m (with optional opening kit 180 ), 2.5 m (with optional opening kit 140 ) Weight 12 kg (with casing 14 kg) Protection class IP 67 Operator dimensions 360x150x140 mm Operating ambient temperature -20 C +55 C Casing dimensions 430 x 307,5 x 214 mm 46
Model Use Control unit Item code Single-leaf max. width (m) Max. weight (kg) Use frequency (cycles/hour)) 770N 230V 2,0 - (3,5 with electric lock) 500 20 Not included 10675201 770N - 24V 2,0 - (3,5 with electric lock) 500 Continue use Not included 10675301 The packaging of the operator 770N includes an electromechanical operator, transmission leverage, a thrust capacitor 12.5 uf 400V. The package includes the operator 24VDC 770N: an electromechanical operator, installation accessories, two release keys. The carrier case package includes: a carrier case, a stainless steel lid, a support bracket leaf with system lever release, two release keys, installation accessories. (*) See graph on next page. EXAMPLE OF A TYPICAL INSTALLATION 770N 230V Low voltage cabling cable 3x0,50 cable 2x0,50 Power cabling (230 V) cable 3x1,50+T cable 2x1,5+T cable 2x1,5 Ref Q.ty Description Item code 2 Actuators 770 N - 230 10675201 2 Casing with release system (patented) 490065 1 Flashing FAACLIGHT 230 V 410013 1 Key switch T10 401010001-36 1 Electronic card E045 790005 1 Enclosure mod. And for electronic boards 720119 1 Receiver XF433 MHz 319006 2 Pair of photocells XP 15 B 785149 2 Column (max. height 628 mm) 401039 2 Foundation plate for column SAFEBEAM / XP 15 B 737637 1 2 channels transmitter XT2 433 SLH LR 787007 Automated systems for swing-leaf gates EXAMPLE OF A TYPICAL INSTALLATION 770N 24V Low voltage cabling cable 3x0,50 cable 2x0,50 cable 2x1,5 cable 2x2,50 Power cabling (24 V) cable 2x1,5+T Ref Q.ty Description Item code 2 Actuators 770 N - 24 V 10675301 2 Casing with release system (patented) 490065 1 Flashing FAACLIGHT 24 V 410014 1 Key switch T10 401010001-36 1 Unit E 024S with container 790286 1 Receiver XF433 MHz 319006 2 Pair of photocells XP 15 B 785149 2 Column (max. height 628 mm) 401039 2 Foundation plate for column SAFEBEAM / XP 15 B 737637 1 2 channels transmitter XT2 433 SLH LR 787007 N.B.: Cable sections in mm 2 ATTENTION: The configuration does not include the safety devices (ie: active or passive safety edges) that are to be determined on the basis of risk analysis of each specific installation (Ref.: UNI-EN European Standards 12445 and 12453). The indicated price does not include the costs for the installation and for the preparation of masonry, electrical and metalwork preparations. 47
770N RESIDENTIAL CONTROL UNITS FOR 230V Control board 455 D (Discontinuing) Technical specifications page 144 Item code 790917 Control board E045 Technical specifications page 145 Item code 790005 Control board E145 Technical specifications page 146 Item code 790006 ACCESSORIES FOR 230V Enclosure mod. LM for electronic boards Leaf mt. Item code 720309 Enclosure mod. L for control boards Item code 720118 Enclosure mod. E for electronic boards Item code 720119 Control units FOR 24V Control unit E 024S Tech. specifications page 147 Item code 790286 Control unit E 124 Tech. specifications page 148 Item code 790284 ACCESSORIES FOR 24V Leaf mt. Emergency battery kit XBAT 24 (not for E 124) Emergency battery support kit (*) (only for E 124) Item code 390923 Item code 390926 48
COMMON ACCESSORIES FOR BOTH OPERATORS Release lock with customized key BUS XIB interface (if E024S or E045 board is used with non-bus photocell) Item code 790062 Kit magnetic limit switch boards 455D, E145, E124 Item code 490126 Couple carrying box without unlocking system Codice articolo 490140 Receiving-transmitting module X-COM Stainless steel casing with release system (patented) Item code 490110 Release lever (for code 490140) Item code 424010 X-COM BOX module Item code 787150 Item code 790061 Casing with release system (patented) Item code 490065 Item code 712104001-36 Group encoder for 770N Item code 404035 NEW Automated systems for swing-leaf gates Kit 140 opening Item code 390612 Kit 180 opening Item code 490111 Internal mechanical stop in opening Item code 722121 Internal mechanical stop closing Item code 722122 WARNING: The operator 770N must be accompanied with a carrier case. For a two-leaf gate operators to provide two, two self supporting casings and a control unit. *** The 2 standard lead batteries are not supplied by FAAC and must have current / voltage 12V/4Ah. Dimensions: 90x70x108 mm (24V) OTHER ACCESSORIES Key-operated push buttons page 166 Photocells and Columns page 171 Safety devices page 173 Flashing lamps page 174 Transmitters page 160 Various accessories page 175 49
750 standard RESIDENTIAL CONDOMINIUM Underground hydraulic operator 230V for residential and condominium swing-leaf gates with single-leaf max weight of 800 kg Invisible, quiet operator, consisting of one underground unit and a control unit. The ideal solution for large antique doors of artistic significance. GREENTECH System: 750 + E045 or E145 DIMENSIONS AND TECHNICAL SPECIFICATIONS OF 750 750 CBAC 750 SB Power supply voltage 230 Vac (+6% -10%) 50 (60) Hz Absorbed power 220 W Absorbed current 1 A Motor rotation speed 1400 r.p.m. Pump flow rate 0.75 l/min Operating ambient temperature -20 C to +55 C Protection class IP 55 Thermal protection on motor winding 120 C Weight 7.5 kg Type of oil FAAC HP OIL Dimensions (L x D x H) in mm jack 410 x 160 x 205 mm - control unit 245.6 x 353 x 141.5 mm TECHNICAL SPECIFICATIONS OF HYDRAULIC JACK 100 opening 180 opening Rotation maximum angle 118 200 Angle speed 5,2 /s (750 SBS) - 7,8 /s (750 CBAC-SB) Protection class IP 67 Effective torque 543 Nm (750 CBAC-SB) EXAMPLE OF A TYPICAL INSTALLATION Low voltage cabling 3 cables 3x0.50 1 cable 2x0.50 Power cabling (230 V) 2 cables 3x1.50+T 1 cable 2x1.5+T 1 cable 2x1.5 N.B.: Cable sections in mm 2 Ref. Q.ty Description Item code 2 Control units 750 CBAC 107720 2 Enclosures mod. LM 720309 2 100 opening jacks 108757 2 Jack foundation plates 737607 2 kg Copper pipe 7365011 1 Control board 452 MPS 790916 1 Enclosure mod. L 720118 1 Receiver RP 433 SLH 787824 1 Two-channel transmitter XT2 433 SLH LR 787007 1 Flashing lamp FAACLIGHT 410013 1 Pair of photocells FOTOSWITCH 785152 1 Key-operated push-button T10 401010001/36 3 Plastic enclosure to be walled in 720086 IMPORTANT: The configuration does not include the safety devices (i.e.: active or passive safety edges) that are to be determined according to the specific risk analysis of each installation (Ref.: UNI-EN 12445 and 12453 European Standards). The indicated price does not include the installation costs and the expenses for masonry, electrical and metalwork preparations. 50
750 standard Model Use Item code Single-leaf max. width (m) Max. weight (kg) Use frequency (cycles/hour) Control unit Control unit 750 CBAC 1.80 / 45 Not included 107720 Control unit 750 SB 2.50 / 45 Not included 107721 100 opening jack / 800 / Not included 108757 180 opening jack / 800 / Not included 108758 The jack packages include: a hydraulic jack, installation accessories with stainless steel cover, oil bottle to fill the pipes. The 750 control unit packages include: a hydraulic control unit with hydraulic block at opening/closing (750 CBAC), without block (750 SB) and a thrust capacitor 8 µf 400 V. CONTROL UNITS Enclosure mod. LM for control boards Control board 455 D (Discontinuing) Technical specifications page 144 Item code 790917 SPECIFIC ACCESSORIES Item code 720309 Enclosure mod. L for control boards Item code 720118 Enclosure mod. E for control boards Item code 720119 Control board E045 Technical specifications page 145 Item code 790005 Control board E145 Technical specifications page 146 Item code 790006 Automated systems for swing-leaf gates Underground securing plates for jack Release lock with key Ø 6x8 mm copper pipe (20 kg coils - 1 kg corresponds to about 5 m) Off-centre arm (for installations with non aligned jack) Item code 737607 Item code 712805 Item code 7365011 Item code 738704 ACCESSORIES FOR HOSES Complete unions (packg. of 4 and packg. of 40) 4 unions code 390421 40 unions code 390440 Hose composed of 10 m and coil of 100 m - Ø 4x8 mm 10 m hose code 390422 100 m hose code 390439 An electric lock should be installed for control units without a block facility. You ll need the following for a two-leaf gate: two control units, two Mod. LM. enclosures, two jacks, an control unit and, if necessary, an electric lock. The operator with block facility is not recommended when there is no access to the manual release device (panelled leaves or no other access to the property). SAFECODER slow-down kit see page 157 OTHER ACCESSORIES Key-operated push buttons page 166 Photocells and Columns page 171 Safety devices page 173 Flashing lamps page 174 Transmitters page 160 Various accessories page 175 51
750 CP RESIDENTIAL CONDOMINIUM Underground hydraulic operator 230V for residential and condominium swing-leaf gates with single-leaf max weight of 800 kg GREENTECH System: 750 CP + E045 or E145 Invisible, quiet operator, consisting of one underground unit and a control unit. The ideal solution for large antique doors of artistic significance, leaves up to 3.5 m. Facilitated installation thanks to the carrier case. DIMENSIONS AND TECHNICAL SPECIFICATIONS OF 750 750 CBAC 750 SB Power supply voltage 230 Vac (+6% -10%) 50 (60) Hz Absorbed power 220 W Absorbed current 1 A Motor rotation speed 1400 r.p.m. Pump flow rate 0.75 l/min Operating ambient temperature -20 C to +55 C Protection class IP 55 Thermal protection on motor winding 120 C Weight 7.5 kg Type of oil FAAC HP OIL Dimensions (L x D x H) in mm carrier case 420 x 254.5 x 205 mm - control unit 353 x 245.6 x 141.5 mm TECHNICAL SPECIFICATIONS OF HYDRAULIC JACK 100 opening 180 opening Rotation maximum angle 118 200 Angle speed 5.2 /s (750 SBS) - 7.8 /s (750 CBAC-SB) Protection class IP 67 Effective torque 543 Nm (750 CBAC-SB) EXAMPLE OF A TYPICAL INSTALLATION Low voltage cabling 3 cables 3x0.50 1 cable 2x0.50 Power cabling (230 V) 2 cables 3x1.50+T 1 cable 2x1.5+T 1 cable 2x1.5 N.B.: Cable sections in mm 2 Ref. Q.ty Description Item code 2 Control units 750 CBAC 107720 2 Enclosures mod. LM 720309 2 100 opening jacks 108759 2 Carrier cases 490071 2 kg Copper pipe 7365011 1 Control board 452 MPS 790916 1 Enclosure mod. L 720118 1 Receiver RP 433 SLH 787824 1 Two-channel transmitter XT2 433 SLH LR 787007 1 Flashing lamp FAACLIGHT 410013 1 Pair of photocells FOTOSWITCH 785152 1 Key-operated push-button T10 401010001/36 3 Plastic enclosure to be walled in 720086 IMPORTANT: The configuration does not include the safety devices (i.e.: active or passive safety edges) that are to be determined according to the specific risk analysis of each installation (Ref.: UNI-EN 12445 and 12453 European Standards). The indicated price does not include the installation costs and the expenses for masonry, electrical and metalwork preparations. 52
750 CP Model Use Item code Single-leaf max. width (m) Max. weight (kg) Use frequency (cycles/hour) Control unit Control unit 750 CBAC 1.80 / 45 Not included 107720 Control unit 750 SB 2.50 / 45 Not included 107721 100 opening jack / 800 / Not included 108759 180 opening jack / 800 / Not included 108760 The jack packages include: a hydraulic jack, oil bottle to fill the pipes. The 750 control unit packages include: a hydraulic control unit with hydraulic block at opening/closing (750 CBAC), without block (750 SB) and a thrust capacitor 8 µf 400 V. The carrier case package includes: a carrier case in steel, a cover in stainless steel, a grooved bush and installation accessories. CONTROL UNITS Control board 455 D (Discontinuing) Technical specifications page 144 Item code 790917 SPECIFIC ACCESSORIES Enclosure mod. L for control boards Item code 720118 Enclosure mod. E for control boards Item code 720119 Control board E045 Technical specifications page 145 Item code 790005 Control board E145 Technical specifications page 146 Item code 790006 Automated systems for swing-leaf gates Enclosure mod. LM for control boards Item code 720309 ACCESSORIES FOR HOSES Release lock with key Item code 712805 Ø 6x8 mm copper pipe (20 kg coils - 1 kg corresponds to about 5 m) Item code 7365011 Gatecoder slow-down kit (Discontinuing) Technical specifications page 153 Item code 104485 Price (euro) 40.70 Gatecoder installation kit (Discontinuing) for 750CP automated systems Item code 428246 Price (euro) 35.00 Carrier case Item code 490071 Complete unions (packg. of 4 and packg. of 40) 4 unions code 390421 40 unions code 390440 Hose composed of 10 m and coil of 100 m - Ø 4x8 mm 10 m hose code 390422 100 m hose code 390439 IMPORTANT: The CP jacks must be supplied with a carrier case. An electric lock should be installed for control units without a block facility. The operator with block facility is not recommended when there is no access to the manual release device (panelled leaves or no other access to the property). You ll need the following for a twoleaf gate: two control units, two Mod. LM. enclosures, two carrier cases, two jacks CP, an control unit and, if necessary, an electric lock. OTHER ACCESSORIES Key-operated push buttons page 166 Photocells and Columns page 171 Safety devices page 173 Flashing lamps page 174 Transmitters page 160 Various accessories page 175 53
S800H RESIDENTIAL CONDOMINIUM Underground hydraulic operator 24V for residential and condominium swing-leaf gates with single-leaf width 4 m and max weight of 800 kg Continuous use frequency Integrated magnetic encoder with bus 2Easy (non polarized two wire connection). FAAC PATENT. Thanks to the positive stops integrated, there is no need to install opening and closing mechanical stops on the ground. FAAC PATENT. Hybrid technology. Service release device. Easier handling and installation thanks to the integrated handles. FAAC PATENT. SBW actuators for use in areas subject to strong winds. SAFEZONE System: S800H + E024S or E124 GREENTECH System: S800H + E124 DIMENSIONS AND TECHNICAL SPECIFICATIONS OF S 800 H S 800 H CBAC S 800 H SB / SBW Power supply 230 Vac Electric motor 24 Vdc Absorbed power 60 W (*) Max. torque 500 Nm (with E024S control board) - 600 Nm (with E124 control board) Angle speed max 5.5 /s (with E024S control board) - 8.2 /s (with E124 control board) Operating ambient temperature -20 C to +55 C Operator weight 13.2 kg/17.0 kg (180 ) Type of oil FAAC HP OIL Max opening angle 113 187 Protection class IP 67 Type of slow down electronic Leaf max width 2 m 4 m Frequency of use continuous use Hydraulic block installed not installed (*) for each single operator. EXAMPLE OF A TYPICAL INSTALLATION Low voltage cabling 3 cables 3x0.50 1 cable 2x0.50 Power cabling (230 V) 2 cables 3x1.50+T 1 cable 2x1.5+T 1 cable 2x1.5 N.B.: Cable sections in mm 2 Ref. Q.ty Description Item code 2 Operators S 800 H CBAC 100 108710 2 Carrier cases S 800 H 490112 2 Hydraulic release device 390035 2 Grooved Joint kit 390972 1 Control unit E024S 790286 1 Receiver XF 433 319006 1 Two-channel transmitter XT2 433 SLH LR 787007 1 Flashing lamp FAACLIGHT 24 Vdc 410014 2 Pair of photocells XP 15 B 785149 2 Aluminium columns for XP 15 B 401039 2 Foundation plates for columns 737637 1 Key-operated push-button T10 401010001/36 IMPORTANT: The configuration does not include the safety devices (i.e.: active or passive safety edges) that are to be determined according to the specific risk analysis of each installation (Ref.: UNI-EN 12445 and 12453 European Standards). The indicated price does not include the installation costs and the expenses for masonry, electrical and metalwork preparations. 54
S 800 H Model Use Item code Single-leaf max. width (m) Max. weight (kg) Use frequency (cycles/hour) Control unit S 800 H CBAC 100 2.00 800 Continuous use Not included 108710 S 800 H CBAC 180 2.00 800 Continuous use Not included 108712 S 800 H SB 100 4.00 800 Continuous use Not included 108711 S 800 H SB 180 4.00 800 Continuous use Not included 108713 S 800 H SBW 100 4.00 800 Continuous use Not included 108714 S 800 H SBW 180 4.00 800 Continuous use Not included 108715 The packages contain: a hydraulic operator with hydraulic block at opening/closing (CBAC) without block (SB), a magnetic encoder, release and setting key. The carrier case package includes: a carrier case in cataphoresis treated aluminium with anti-rotation pin, a cover in polished stainless steel. CONTROL UNITS Control unit EO24S Technical specifications page 147 Item code 790286 Control unit E 124 Technical specifications page 148 Item code 790284 Emergency battery support kit * (only for E124) Item code 390926 SPECIFIC ACCESSORIES Carrier case Item code 490112 Stainless steel carrier case Item code 490113 Automated systems for swing-leaf gates NEW NEW Lever release system for CBAC or SBW operators* Item code 390878 NEW** Hydraulic release system (to be used with 390972) for CBAC or SBW operators Item code 390035 Grooved joint kit not to be used with 390035 (until sold out) Item code 390887 NEW Grooved joint kit (*) (to be used with code 390035) Codice articolo 390972 **UNLOCKING/COUPLING CONFIGURATION: - For CBAC or SBW operators: lever release system (390878) or hydraulic release system (390035) + grooved joint kit (390972). - For SB operators: grooved joint kit (390972). Release lock with customised key from no. 1 to no. 36 Item code 712501001 to 712501036 Receiving-transmitting module X-COM Item code 787150 Emergency battery kit XBAT 24 (not for E 124) Item code 390923 Release lock with customised key from no.1 to no. 36 for hydraulic release Item code 71209101 to 71209136 X-COM BOX module Item code 790061 BUS XIB interface (if E024S board is used with non-bus photocell) Item code 790062 Note (*) The 2 standard Pb batteries are not supplied by FAAC and must have 12V/4Ah 90x70x108 mm voltage/current OTHER ACCESSORIES Key-operated push buttons page 166 Photocells and Columns page 171 Safety devices page 173 Flashing lamps page 174 Transmitters page 160 Various accessories page 175 55