88 itch 50.8 (2.00 ) the most cleanable modular belt in the world he belt is the most cleanable, 2 pitch, straight running modular belt in the world and the belt holds the valid SF/USDA approvals. he belt is used in various food applications and offers various styles from closed and open surfaces to roller or rubber top. he belt is the preferred belt in the following industries/ applications: Meat applications (beef & pork) including deboning lines, fat/trim lines, cutting lines, offal lines, evisceration lines, ackaging lines and elevator/ incline conveyors oultry applications including cage dumper lines, deboning lines, fat/ trim lines, offal lines, grading lines, packaging lines and elevator/incline conveyors Fruit & vegetable applications including elevators, steam peeler lines, inspection tables, blanchers and packaging lines Seafood applications including bulk feeder, elevators, inspection tables, grading lines, glazing lines, cooling and freezing lines Snack food applications including fryer discharge and incline applications roduct features and operational benefits: Easy to clean Single ink belt (no brick lay) reducing downtime for cleaning with up to 70% Single ink belt reducing bacteria growth and eliminating knives sticking in belt seams Unique lockpin locking system Unique sprocket engagement Strong and thick product supports allowing load without breakage Stick and non stick surfaces allowing optimized product throughput
89 Selection Ø 50.8 (2.00 ) ø8 (0.31 ) C G* * * Indent: GE and E are 35.0 (1.38 ). atent atented Materials See page 8 65 (2.6 ) Side Guards: 200 (7.9 ) 18% 20% 22% See pages 93 and 94 See page 172 01 See page 12 16% RO Rubber op ype R4 Alternatives Dimensional Sketches R S SS304 A6.6 E G A6.6 G Accessories 16% 18% 20% 22% G GE E See page 96 See page 95 See page 96 RO Rubber op ype R4 Dimensions 8.0 0.31 R 3.2 0.13 3.5 0.14 3.0 0.12 S 2.0 0.08 50.8 2.00 16.0 0.63
90 Materials and Colors ype materials and colors pin materials and colors C OMDI OMDI EI E EI E G OMDI GE OMDI EI E E EI E 16% EI E 18% 20% 22% RO* Rubber op R4 OMDI EI E EI EI EI OMDI G OMDI + 01 E E E A6.6 * Roller material and color for RO: OMDI Alternative pin materials and colors. See page 89.
91 ricklayed elt idths (See below for Single ink widths) 151 184 268 302 335 402 418 452 5.9 7.2 10.6 13.2 15.8 16.5 17.8 637 653 704 720 754 787 804 854 25.1 25.7 27.7 2 29.7 31.0 31.7 33.6 1022 1055 1089 1106 1156 1173 1206 1240 486 19.1 871 34.3 1256 49.4 1658 65.3 2060 81.1 503 19.8 905 35.6 1307 51.5 1692 66.6 2077 81.8 553 21.8 938 36.9 1323 52.1 1709 67.3 2110 83.1 569 22.4 955 37.6 1357 53.4 1759 69.3 2144 84.4 603 23.7 1005 39.6 1390 54.7 1776 69.9 2161 85.1 40.2 41.5 42.9 43.5 45.5 46.2 47.5 4 1407 1457 1474 1507 1541 1558 1608 1625 On above belt width values, the belt width tolerance on standard materials is +0/0.4% at 23 C/73 F. 55.4 57.4 58.0 59.3 60.7 61.3 63.3 64.0 1809 1842 1859 1909 1926 1960 1993 2010 71.2 72.5 73.2 75.2 75.8 77.2 78.5 79.1 2211 2228 2261 2295 2312 2362 2379 2412 2446 2462 2512 87.0 87.7 89.0 90.4 91.0 93.0 93.7 95.0 96.3 96.9 98.9 Single ink Single ink is available in the following standard widths: K275 (67.0 (2.64 )) K325 (83.8 (3.30 )) K600 (151.0 (5.94 )) K725 (184.0 (7.24 )) K1800 (452.0 (17.80 )) K2000 (503.0 (19.80 )) K2400 (603.0 (23.74 )) Single ink standard materials and colors see page 90. Single ink elt idths elt type and widths K275 67.0 (2.64 ) K325 83.8 (3.30 ) K600 151.0 (5.94 ) K725 184.0 (7.24 ) K1800 452.0 (17.80 ) K2000 503.0 (19.80 ) K2400 603.0 (23.74 ) C 16% 18% 20% 22% G GE E RO Rubber op
92 elt eights elt material OMDI E in material kg/m 2 lb/ft 2 kg/m 2 lb/ft 2 kg/m 2 C G GE E Rubber op 16% 11.1 2.27 7.5 1.54 8.0 18% 11.1 2.27 7.5 1.54 8.0 20% 11.2 2.29 7.4 1.52 7.9 22% 10.8 2.21 7.2 1.47 7.6 RO* 11.3 2.31 * For total belt weights add 0.011 kg (0.024 lb) x no. of roller kits. lb/ft 2 1.64 1.64 1.62 1.56 ermissible ensile Strength elt material OMDI E in material /m lbf/ft /m lbf/ft /m lbf/ft C G GE E 16% 18% 20% 22% Rubber op RO 11000 754 Max. oad per Roller Max. permissible static load Max. permissible dynamic load (accumulation) lbf lbf RO 2200 495 100 23
93 Sprockets o. of teeth 6 8 10 12 16 itch diameter Overall diameter ub diameter ore 99.5 3.92 65.0 2.56 sq 38.1 sq 1.50 sq 40.0 sq 1.57 65.0 2.56 sq 38.1 sq 1.50 132.8 5.23 132.9 5.23 sq 40.0 sq 1.57 65.0 2.56 164.4 6.47 166.3 6.55 120.0 4.72 65.0 2.56 196.3 7.73 198.6 7.82 120.0 4.72 100.0 3.94 sq 50.8 sq 2.00 sq 38.1 sq 1.50 sq 40.0 sq 1.57 ø40.0/70.0* ø1.57/2.76* sq 50.8 sq 2.00 sq 63.5 sq 2.50 sq 60.0 sq 2.36 sq 38.1 sq 1.50 sq 40.0 sq 1.57 ø40.0/70.0* 1.57/2.76* sq 50.8 sq 2.00 sq 60.0 sq 2.36 65.0 2.56 260.4 10.25 263.8 10.04 150.0 5.91 ø40.0/70.0* 1.57/2.76* Reference no. 183A6M0611100 183A6M0611100I150S 183A6M06111G00M040S 183A6M08111G00 183A6M08111G00I150S 183A6M0811100M040S 183A6M0811100I200S 183A6M1011100 183A6M1011100I150S 183A6M10111G00M040S 183A6M10111G01 183A6M1011100I200S 183A6M1011100I250S 183A6M10111G00M060S 183A6M12111G02 183A6M1211100I150S 183A6M1211100M040S 183A6M1211101 183A6M1211100I200S 183A6M1211100M060S 183A6M1611100 183A6M1611101 * Minimum/maximum round bore. lacement of earstrips and Sprockets o. of teeth Minimum dimension earstrip distance A 6 60.9 2.40 36.2 1.43 8 76.8 3.02 53.6 2.11 10 92.8 3.65 70.5 2.78 12 10 4.28 87.2 3.43 16 141.1 5.56 120.2 4.73 A idth of sprockets: 42.3 (1.67 ) ooth width: 9.5 (0.37 ) material: A6 Other sprocket are available upon request. wopart sprockets are available upon request. lease note, if travel is in both directions, an extra set of sprockets is required. Alternatively use bidirectional options. (See next page.) Max. oad per Sprocket elt material with snub roller without snub roller 2000 1250 OMDI lbf 450 281
94 idirectional Sprockets o. of teeth 10 12 16 itch diameter 164.4 196.3 260.4 6.47 7.73 10.25 Overall diameter 166.3 198.6 263.8 6.55 7.82 10.04 ub diameter 65.0 1) 120.0 1) 120.0 1) 2.56 4.72 4.72 sq 38.1 sq 40.0 ø40.0/70* sq 60.0 sq 63.5 sq 60.0 ore sq 1.50 sq 1.57 ø1.57/2.76* sq 2.36 sq 2.50 sq 2.36 Reference no. 183A6M1022100 183A6M1022100I150S 183A6M10221G00M040S 183A6M1022101 183A6M1022100M060S 183A6M1022100I250S 183A6M1222100M060S 113.0 2) 4.45 sq 60.0 sq 2.36 183A6M12221G01M060S 156.0 2) 6.14 sq 90.0 sq 3.54 183A6M12221G01M090S 114.0 2) 4.49 sq 90.0 60.0 sq 3.54 2.36 183A6M16221G01M060S** 183A6M1622100M090S 156.0 2) 6.14 sq 90.0 sq 3.54 183A6M16221G01M090S** * Minimum/maximum round bore. * ** Other sprocket sizes are available upon request. wopart sprockets are available upon request. idth of sprockets: 1) 42.3 (1.67 ) 2) 50.0 (1.97 ) material: A6 idth of sprockets: 50.0 (1.97 ) ooth width: 17.0 (0.67 ) material: A6
95 Accessories roduct Support Dimensional Sketches roduct Support Flat roduct Support ent roduct Support o Cling roduct Support Flat ent C C Drain roduct Support o Cling Drain 10% roduct Support Cupped roduct Support Micro roduct Support Cupped roduct Support Micro 20% roduct Support Micro 22% ote: Depending on height and spacing the use of product supports may influence the backflex radius. roduct Support molded Indent 34 (1.34 ) roduct Support Micro Micro 20% Micro 22% Materials, Colors and Dimensions Style roduct Support Flat roduct Support ent roduct Support o Cling roduct Support o Cling Drain roduct Support Cupped roduct Support Micro roduct Support Micro 20% roduct Support Micro 22% 25.4 50.8 152.4 152.4 1.00 2.00 6.00 K600 151.0 50.8 2.00 8.7 0.34 5.0 10.0 3.0 6.00 0.20 0.39 0.12 7.3 8.2 9.1 10.0 10.0 9.2 9.6 52.0 3.0 ype OMD EI I 0.29 0.32 0.36 0.39 0.39 0.36 9.2 0.36 9.2 0.36 0.38 10.5 0.41 9.6 0.38 10.5 0.41 2.05 5.0 0.20 3.0 0.12 0.12 K600 K600 idth 5.94 151.0 5.94 151.0 5.94 3.0 0.12 3.0 0.12 materials & colors roduct Support molded indent 34 (1.34 ) 10.0 0.39
96 Accessories ab Dimensions G 4.2 0.17 J 22.0 23.2 0.87 0.91 K 17.0 0.67 K ote: hen using tabs, please verify sufficient clearance to the shaft. J G Max. shaft diameter = Sprocket pitch diameter 63.5 (2.50 ). hen using square shafts, please verify that the diagonal does not exceed max. diameter. Example: Sprocket z = 6: Max. shaft diameter 63.5 = ø38.1 ( 2.50 = ø1.4 ). ab Material and Color OMDI ote: hen using a belt sy stem with tabs, the temperature should be constant. lease note that the tabs are not always placed in the middle of the belt. Accessories ab Dimensions E E A 101.7 76.4 C A C 50.9 2.00 D* 16.0 0.63 E 32.0 1.26 50.8 2.00 D D * 34.0 (1.34 ) combined with roduct Support. Increment: 8.4 (0.33 ). ote: Side Guards can not be positioned on top of G and cones. Side Guard Materials, Colors and Dimensions eight materials & colors EI I 50.8 2.00 ote: ackflex radius when side guards are used: 200 (7.9 ).