SA278RXX 2A LDO VOLTAGE REGULATOR. HANGZHOU SILAN MICROELECTRONICS CO.,LTD REV: Page 1 of 16 DESCRIPTION

Similar documents
KA278RXXC-Series. 2A Output Low Dropout Voltage Regulators. Features. Description. Internal Block Diagram.

KA278RXXC-Series. 2A Output Low Dropout Voltage Regulators. Description. Features. Internal Block Diagram.

KA78R05. Low Dropout Voltage Regulator. Features. Description. Internal Block Diagram.

KA78R05. Low Dropout Voltage Regulator. Features. Description. Internal Block Diagram.

KA317M. 3-Terminal 0.5A Positive Adjustable Regulator. Features. Description. Internal Block Diagram.

IL1117-xx. 1.0A Low Dropout Positive Voltage Regulator TECHNICAL DATA. Features. Applications. Absolute Maximum Ratings. Rev. 02

300mA,Ultra-low noise, Small Package Ultra-Fast CMOS LDO Regulator

GM1117 GM1117V1.01. Features. Description. Application. Typical Application Circuits 1A LOW DROPOUT PRECISION VOLTAGE REGULATOR

TO-220. Symbol Description Max Units VIN Input Voltage 15 V IOUT DC Output Current PD/(VIN-VO) ma. -40 to 125 (* in case of IL

FIXED VOLTAGE REGULATOR

Features. Low Dropout Voltage Load regulation:0.5% Max current. The AMS1117 is available in six fixed

AMS1117 1A Adjustable / Fixed Low Dropout Linear Regulator

3-TERMINAL ADJUSTABLE REGULATOR LM317L

IL1117C-xxLow Dropout Positive Voltage Regulator TECHNICAL DATA

Advanced Power Electronics Corp.

1.0A Low Dropout Positive Voltage Regulator

DUAL POSITIVE/NEGATIVE, 3 AMP, LOW DROPOUT FIXED VOLTAGE REGULATORS

+3.3Vin to +2.5V Output at 3.0A In Hermetic Packages

Ultra Low Dropout Positive Adjustable Linear Regulator Hermetic Package + 3.3Vin at 3.0A

5A LOW DROPOUT POSITIVE REGULATOR

Low Power, Low Dropout, 250mA, RF - Linear Regulators

ADV AD A 150kHz 40V Buck DC/DC Converter With Constant Current Loop. General Description. Features. Applications

The LD2940 is a low dropout three-terminal regulator with a typical dropout of 280mV at 1A output current.

PIN DESCRIPTION. Enable (Input) IN GND OUT FLG ADJ LM39300T-X.X LM39300-X.X

R-78AA-0.5 INNOLINE. Features. 0.5 AMP SMD Single Output. Derating-Graph (Ambient Temperature) DC/DC-Converter

China - Germany - Korea - Singapore - United States - smc-diodes.com

SPECIFICATION VOLTAGE REGULATOR PQ200WNA1ZPH

HM5061 Max.1.6A Li-ion Switching Charger IC

AT1084 5A Low Dropout Positive Voltage Regulator

FEATURES DESCRIPTION APPLICATIONS TYPICAL APPLICATION PIN OUT & MARKING. Max.2A Li-ion Switching Charger IC

BL8578 DESCRIPTION FEATURES APPLICATIONS PIN OUT & MARKING TYPICAL APPLICATION. Max.2A Li-ion Switching Charger IC

HP420X. 5A, High Efficiency POL Module GENERAL DESCRIPTION: FEATURES: APPLICATIONS: TYPICAL APPLICATION CIRCUIT & PACKAGE SIZE:

A79L05~A79L24. AiT Semiconductor Inc. ORDERING INFORMATION

MP V, 1A, Li-lon, Linear Battery Charger with 10mA High Voltage LDO

3A Switching Charger, 2.4A Boost and Fuel Gauge in One ESOP8 with Single Inductor

SGM4056 High Input Voltage Charger

SYMBOL PARAMETER FOR BOOST CONVERTER CONDITIONS MIN TYP MAX UNITS

APPLICATIONS: AVAILABLE OPTIONS

High Efficiency POL Module

Standalone Linear Li-Ion Battery Charger with Thermal Regulation

Delphi D12S Non-Isolated Point of Load

UNISONIC TECHNOLOGIES CO., LTD UC5301

ACE4108 Max.2A Li-ion Switching Charger IC

4707 DEY ROAD LIVERPOOL, NY PHONE: (315) FAX: (315) M.S. KENNEDY CORPORATION MSK Web Site:

Packaging (1) Package

Delphi Series IPM, Non-Isolated, Integrated

1.2A Single-chip Li-ion and Li-POL Charge

SC61A05. Standalone Linear Li-Lon Battery Charger. With Thermal Regulation. Features. Description. Applications

Low Dropout Regulator with Delayed Reset

PL10S-12 Non Isolated DC/DC Converters Long Form Datasheet

A4063. AiT Semiconductor Inc. APPLICATION ORDERING INFORMATION TYPICAL APPLICATION

Output Current. Output Unit. Feature Set i 6A A 033 V R TDK- Lambda Dallas Technical Center. 14 Amps 3.3V Single

FEATURES. Charging. - High Voltage Chemistry Support: up to 4.35V. Others

Advanced Monolithic Systems

The XA4203 is available in the SOP-8L package. Charging Docks Handheld Instruments Portable Computers

S24SP15004 series 60W Single Output DC/DC Converter

AMS Amp LOW DROPOUT VOLTAGE REGULATOR. General Description. Applications. Typical Application V CONTROL V OUT V POWER +

(typ.) (Range) ±18 330# 89 MPW MPW

PT8A mA Li-ion/Polymer Battery Charger

Maximum Input Current Vin=18V, 100% Load A Vin=24V ma No-Load Input Current

MYLSM00502ERPL DC-DC converter

How to Select and Use Power Supplies and dc/dc Converters for Your Applications

COTAG GENERAL DESCRIPTION

LM317L 3-Terminal Adjustable Regulator

3A L.D.O. VOLTAGE REGULATOR (Adjustable & Fixed)

Techcode. Features. General Description. Applications. Package Types DATASHEET

DT V 800mA Standalone Linear Li-ion Battery Charger FEATURES GENERAL DESCRIPTION APPLICATIONS ORDER INFORMATION

LM ma Low Dropout Regulator

XC62FJ Series GENERAL DESCRIPTION APPLICATIONS. FEATURES Maximum Output Current : 200mA TYPICAL PERFORMANCE CHARACTERISTICS

ChipLead Technology VAS A USB/Adapter Switching Charger. Features. General Description. Applications

WATT MBH SERIES DC/DC CONVERTERS

Type AVS SMT Aluminum Electrolytic Capacitors - General Purpose, 85 C

2.5A, 3MHz Switching Charger with Dynamic Power Path in 8-pin ESOP SYS 2.2K STAT. 2A Switching Charger with Minimum Component Count

Delphi NC30 Series Non-Isolated Point of Load DC/DC Power Modules: 12Vin, 0.9V-5Vout, 30A

LP2992 Micropower 250 ma Low-Noise Ultra Low-Dropout Regulator in SOT-23 and LLP Packages Designed for Use with Very Low ESR Output Capacitors

STNS01. Li-Ion linear battery charger with LDO. Description. Features. Applications

ACT V/1.5A Backup Battery Pack Manager FEATURES APPLICATIONS GENERAL DESCRIPTION. Rev 0, 06-Nov-13 Product Brief

MJWI20 SERIES FEATURES PRODUCT OVERVIEW. DC/DC Converter 20W, Highest Power Density MINMAX MJWI20 Series

1.5A L.D.O. VOLTAGE REGULATOR (Adjustable & Fixed) LM1086

800mA Standalone Linear Li-Ion Battery Charger with Dual LED Display

2W, Low Cost DIP, Dual Output DC/DC Converters

ST3S01PHD BATTERY CHARGE I.C.

Delphi NE Series Non-Isolated Point of Load

Output Voltage Current. Input Current Ripple. Efficiency (typ.) Load VDC VDC ma ma ma(typ.) ma(typ.) ma(typ.) μf % 2.

Package: RN: SOT23-5 TRN: TSOT23-5 Features: P: Standard (default, lead free) C: Customized. 1uF

NON-ISOLATED DC/DC CONVERTERS 4.5V-32V Input 1.2V-5.0V/3A Output

800mA Linear Li-Ion Battery Charger with Protection of Reverse Connection of Battery

HX6038 HX

1A Single Chip Li-Ion and Li-Polymer Charger

Efficiency (typ.) (Range) Output Voltage Current. Input Current Load VDC VDC ma ma ma(typ.) ma(typ.) ma(typ.

HM8202. The HM8202 is available in the SOP-8L package. Charging Docks Handheld Instruments Portable Computers

Delphi NE Series Non-Isolated Point of Load DC/DC Modules: 3.1~13.8Vin, 0.59V-5.1Vout, 6Aout

(typ.) (Range) Input Specifications Parameter Model Min. Typ. Max. Unit 12V Input Models Input Surge Voltage (100ms.

IND065BLV Hornet: Non-Isolated DC-DC Voltage Regulator Modules

Ku-Band VSAT Packaged Amplifier

S24SP series 40W Single Output DC/DC Converter

Output Current Input Current Reflected Ripple. Efficiency (typ.) Load VDC VDC ma ma ma(typ.) ma(typ.) ma (typ.) VDC μf % MKW40-12S033

Lithium-Ion Battery Charge Control for AC Charger Monolithic IC MM1707 Series

One Cell Li-battery Linear Charger IC with Battery Temperature Detection 4.20V / 4.35V / 4.40V Charge Voltage

800mA Linear Li-Ion Battery Charger

Transcription:

2A LDO VOLTAGE REGULATOR DESCRIPTION The is a positive low voltage dropout regulator, and voltage dropout is below 0.5V at 2A. The provides two versions: fixed and adjustable versions. The is available in fixed output voltages 2.5V, 3.3V, 5V, 5.1V, 8V,9V, 12V, 15V and 18V. The offers some key features include thermal shutdown, peak current protection, overvoltage protection and output disable function. The is an excellent choice for use in various electronic equipments. FEATURES * Available fixed version 2.5V, 3.3V, 5V, 5.1V, 8V, 9V, 12V,15V, 18V and adjustable version * Low Dropout Voltage: 300mV at 2A output current * Current limiting: 4A * Overvoltage protection: 40V * Built-in output disable function * TO-220 full-mold package (4pin) and TO-252-5L package(5pin) * Overcurrent protection, thermal shutdown * Overvoltage protection, short circuit protection APPLICATIONS * High Efficiency Linear Regulators * Post Regulators for Switching Supplies * Battery Charger * Microprocessor Supply * Desktop PCs, RISC and Embedded Processors Supply ORDERING INFORMATION (Tamb=-20~+80 C) Http://www.silan.com.cn Page 1 of 16

Part No. Package marking Packing Type SA278R00F SA278R00F Stick SA278R25F SA278R25F Stick SA278R33F SA278R33F Stick SA278R05F SA278R05F Stick SA278R51F SA278R51F Stick TO-220F-4L SA278R08F SA278R08F Stick SA278R09F SA278R09F Stick SA278R12F SA278R12F Stick SA278R15F SA278R15F Stick SA278R18F SA278R18F Stick SA278R25DTR SA278R25D Tape & Reel SA278R33DTR SA278R33D Tape & Reel SA278R05DTR SA278R05D Tape & Reel SA278R51DTR SA278R51D Tape & Reel SA278R08DTR TO-252-5L SA278R08D Tape & Reel SA278R09DTR SA278R09D Tape & Reel SA278R12DTR SA278R12D Tape & Reel SA278R15DTR SA278R15D Tape & Reel SA278R18DTR SA278R18D Tape & Reel SA278R25D SA278R25D Stick SA278R33D SA278R33D Stick SA278R05D SA278R05D Stick SA278R51D SA278R51D Stick SA278R08D TO-252-5L SA278R08D Stick SA278R09D SA278R09D Stick SA278R12D SA278R12D Stick SA278R15D SA278R15D Stick SA278R18D SA278R18D Stick Http://www.silan.com.cn Page 2 of 16

BLOCK DIAGRAM F 1 VIN VO 2 Reference Voltage 40V TSD 4 Vdis 1.4V Short-circuit protection GND 3 Fixed mode + - Adjustable mode Http://www.silan.com.cn Page 3 of 16

D + - + - Fixed mode ABOSOLUTE MAXIMUM RATINGS Characteristics Symbol Ratings Unit Input Supply Voltage VIN 35 V Disable voltage Vdis 35 V Output current Io 2.0 A Power dissipation 1 (No heatsink) Pd1 1.5 W Power dissipation 2 (With heatsink) Pd2 15 W Junction Temperature TJ 150 C Operating Temperature range Topr -20~+80 C Thermal resistance,junction-to case Rθjc 2.9 C/W Thermal resistance,junction-to air Rθja 48.51 C/W RECOMMENDED OPERATING CONDITIONS Characteristics Symbol Ratings Unit SA278R25 3.3 SA278R33 5 SA278R05 7 SA278R51 7 Input Voltage VIN SA278R08 10 V SA278R09 11 SA278R12 15 SA278R15 20 SA278R18 21 Operating Junction Temperature Range Tj -20~+80 C Http://www.silan.com.cn Page 4 of 16

ELECTRICAL CHARACTERISTICS (VIN=Note1, Io=1.0A, Ta =25 C, unless otherwise specified. ) Characteristics Symbol Conditions Min. Typ. Max. Unit SA278R25 2.44 2.5 2.56 SA278R33 3.22 3.3 3.38 SA278R05 4.88 5 5.12 SA278R51 4.98 5.1 5.22 Output Voltage VOUT SA278R08 7.8 8 8.2 V SA278R09 8.78 9 9.22 SA278R12 11.7 12 12.3 SA278R15 14.6 15 15.4 SA278R18 17.55 18 18.45 Line Regulation Rline SA278R25 : Vin=4V to 10V SA278R33 : Vin=4V to 10V SA278R05 : Vin=6V to 12V SA278R51 : Vin=6V to 12V SA278R08 : VIN =9V to 25V 0.5 2.5 % SA278R09 : Vin=10V to 25V SA278R12 : Vin=13V to 29V SA278R15 : VIN =16V to 30V SA278R18 : Vin=19V to 30V Load Regulation R LOAD 5mA < Io < 2A 0.1 2.0 % Dropout Voltage VDROP IOUT=2A, 0.3 0.5 V Quiescent Current IQ IO=0A; VDIS=0.4V 3 10 ma Ripple Rejection PSRR 45 55 db Disable Voltage High VdisH Output active 2.0 V Disable Voltage Low VdisL Output disabled 0.8 V Disable Bias Current High IdisH VDIS =2.7V 20 μa Disable Bias Current Low IdisL VDIS=0.4V -0.4 ma Reference Voltage Vref SA278R00 1.24 1.27 1.30 V Http://www.silan.com.cn Page 5 of 16

PIN CONFIGURATION F Fixed mode Adjustable mode D Fixed mode Http://www.silan.com.cn Page 6 of 16

PIN DESCRIPTION F Fixed mode Pin No. Pin name I/O Functions 1 VIN I Input supply voltage 2 VO O Output voltage 3 GND -- Ground 4 Vdis I Disable voltage Fadjustable mode Pin No. Pin name I/O Functions 1 VIN I Input supply voltage 2 VO O Output voltage 3 GND -- Ground 4 Vadj I Adjustable voltage D Fixed mode SA78RXXD Pin name I/O Functions 1 VIN I Input supply voltage 2 Vdis I Disable voltage 3 VO O Output voltage 4 NC Not connect 5 GND -- Ground FUNCTION DESCRIPTION 1. Output disable function The comes with a Vdis pin that allows the regulator to be disabled. Forcing the Vdis pin low disables the regulator.forcing the Vdis pin high enables the output voltage. 2. Input Capacitor The requires a well-bypassed input capacitor for optimal performance. An input capacitor is required if regulator is located at an appreciable distance from power supply filter. 3. Output Capacitor The requires an output capacitor of 47uF or based on the real application to maintain stability. Http://www.silan.com.cn Page 7 of 16

TYPICAL APPLICATION CIRCUIT F Fixed mode 1 VO VIN SA278R25/33/05 /51/08/09/12/15/18F GND Vdis 4 2 3 Disable signal F Adjustable Mode DFixed mode Note: 1. Co =47μF or based on the real application 2. The circuit and parameters are reference only, please set the parameters of the real application circuit based on the real test Http://www.silan.com.cn Page 8 of 16

TYPICAL CHARACTERISTICS CURVES SA278R33 Output voltage vs. input voltage Quiescent current vs. input voltage 5.25 100 Output voltage VO (V) 4.50 3.75 3.00 RL= 2.25 1.50 RL=3.3 0.75 0 0 2 4 6 8 10 Quiescent current IQ (ma) 80 60 40 20 0 RL= 0 5 10 15 20 Input voltage VIN (V) Input voltage VIN (V) Output voltage vs. disable voltage Output voltage vs. temperature(tj) 5.25 3.36 Output voltage VO(V) 4.50 3.75 3.00 2.25 1.50 0.75 Output voltage VO(V) 3.34 3.32 3.30 3.28 3.26 3.24 0 0 0.5 1.0 1.5 2.0 2.5 3.0 3.22-25 0 25 50 75 100 125 Disable voltage Vdis(V) Temperature Tj( C) Quiescent current vs. temperature (Tj) Quiescent current IQ (ma) 10 8 6 4 2 0-25 0 25 50 75 100 125 Junction temperature Tj ( C) Http://www.silan.com.cn Page 9 of 16

SA278R05 Http://www.silan.com.cn Page 10 of 16

SA278R51 Http://www.silan.com.cn Page 11 of 16

SA278R08 Http://www.silan.com.cn Page 12 of 16

SA278R09 Http://www.silan.com.cn Page 13 of 16

SA278R12 Http://www.silan.com.cn Page 14 of 16

SA278R15 Http://www.silan.com.cn Page 15 of 16

PACKAGE OUTLINE TO-220F-4L UNIT: mm TO-252-5L UNIT: mm Note: Silan reserves the right to make changes without notice in this specification for the improvement of the design and performance. Silan will supply the best possible product for customers. Http://www.silan.com.cn Page 16 of 16