44 REX PF
45
46 REX PF
This photo shows how versatile the platform Rex PF (fixed point) is for parking motor vehicles. It can even accoodate vehicles with heavy engines and an extremely long wheel base thanks to the dimensions of the platform (5,200 ) and its weight bearing capacity (up to 3,000 Kg). 47
REX PF The platform comprises a series of galvanized panels, with a low profile - and light weight. The unit is extremely compact since the platform structure requires a pit of just 510 and yet is still extremely study. 48
Note the platform wheel stop (standard) which ensures correct positioning of the vehicle from the front edge. This detail ensures utmost safety, preventing any abrupt forward movement of the vehicle while the platform is being moved. Another such stop is found at the rear. Given the Omer product reliability, any type of vehicle can be parked with the heaviest section - that is the engine / transmission compartment at the front of the vehicle - set on the overhanging part of the platform as this does not compromise the platform in any way. 49
REX PF The underlying part of the platform is supported by a steel skeleton that ensures the utmost reliability. By varying the width of the side platform profile (as indicated in the photo) it is possible to adapt the width of the platform to the customer s car, increasing the support space. 50
The two bases on which the Rex PF legs slide are secured to the ground with mechanical anchors. The wheels are installed with wear-resistant plastic bushes that prevent friction and thus extend the life of the unit. Likewise, the fixed frame has a base secured to the ground with mechanical anchors; it, too, installed with a pin inserted into the wear-resistant plastic bushings. This certainly increases the product lifespan. 51
REX PF The hydraulic system is composed of two pistons (manufactured by Omer S.p.A.), each fitted with a differential valve able to read differences in oil pressure. If such changes occur (for example, if a hydraulic connection breaks or there is a major oil leak), the solenoid valve iediately closes the connection between the piston and the hydraulic connections, thus preventing oil from flowing out of the piston. Moreover, two separate limit switches are set on a shaft to the left of the piston (see photo) and used to regulate platform travel. The third limit switch (seen in the photo) is a safety back-up which cuts in if in the unlikely event of a double failure. The junction box connecting the machine to the electrical control panel is set on the lower spacer of the fixed point leg, thus ensuring utmost accessibility. All systems are pre-installed on the unit to aid in a quick and smooth installation. The photo shows how the electric circuit is perfectly integrated into the machine, while still easily accessible for maintenance. 52
TECHNICAL DATA SHEET AND ACCESSORIES 53
REX PF TECHNICAL DATA SHEET AND ACCESSORIES Capacity Standard Lifting Height Max Lifting Height Minimum Platform Standard Platform Max Platform Pit Power Speed Power supply Standard Weight REX PF /kg / 3000 6608 3500 137,8 3500 137,8 2320X4700 91,3x185 2850x5200 112,2x204,7 3000x5600 118,1x220,5 510 20,1 4 kw 5,4 hp 0,08 m/s 3,1 /s 3100 6828 54
accessories STANDARD ITEM OPTIONAL ITEM DESCRIPTION Standard colours: BLU / BLUE RAL 5005 e/and ARGENTO / SILVER RAL 9006 Nr. 1 platform composed by hot galvanised slats Max. Travel 4.100. Max. Travel 3.400. Scissor coupling flange Nr. 2 pit bases plate Nr. 2 lifting cylinder Nr. 2 dead man push-button board Security control module for sensors and safety locks Nr. 1 hydraulic control unit with motor Power Supply: 380-415V/3Ph/50-60Hz N 2 stops wheels bars L=745 2 stops Mechanical and electrical safety devices Roof transiting capacity: 3.000 (Not suitable to lift a vehicle) Roof supplied with diamond plate Roof for tiles application includes 3 cm. height perimeter frame Nylon Package Screws anchor Undersized / oversized non standard platform Smooth plate platform set for tiles application Capacity until 8.800 Lbs. Additional Stop Additional push button board Safety lock for concertina and standard doors Additional electro - magnetic sensor Outside Pulse Recall for each Push Button Board Pulse Coand Return to Home Position Button Outside Infra-red Remote Control - Each Receiver Outside Infra-red Remote Control - Each Transmitter Flashing light Audible warning kit Two-colours tower light (Red / Green) Waterproof galvanised cover for control unit for outdoor installation Waterproof push-button board IP 65 Lifting speed increase from 0,05 to 0,10 m/s Energy Saving Soft Start Nr. 1 fixed handrail protection without grid H=1.200.(each meter) Nr. 1 removable handrail protection without grid H=1.200 (each meter)* Light Barriers Roof Car Presence Sensor (Nr. 2) Non standard colour* Push button board people lift design* Hot Galvanisation Roof Hot Galvanisation Wood Pallet for Rex Machine Wood Pallet for Platform Plates Control Panel Crate REX PF notes N.2 electromagnetic sensors included Tiles weight up to 70 Kg. square mt. Max - minimum travel 3000 - The pit dimensions are modified in order to take into account the tiles depth Min. w 2.660 x l 5.200. - Max. w 3.000 x l 6.000. Includes 3 cm. height perimeter frame - max. 70 square m Suitable only for closed shaft Suitable only for closed shaft Max. 5 mt. distance Max. 5 mt. distance 55
56 REX
57
58 REX gold
Photo of the flange on the central beam, with the electrical system junction box on the side. The two lifting pistons are set at the centre of the unit, installed on the mobile structure of the legs, thus minimizing any type of encumbrance. The pistons are manufactured by Omer SPA. At the center, the two cylinders are attached by a fixed connection and from there run to the hydraulic system. A bar has been installed on the left piston to hold the three types of limit switches, adjustable according to the desired height. Two limit switches for the top level, two for the lower level and one safety. 59
REX All connection systems both hydraulic and electrical are installed along the legs of the machine, thus they do not take up any extra space and are easy to maintain. All systems are preinstalled on the unit. The photo shows the shaft supporting the limit switches. 60
Moreover, all connections have a catenary protection that keeps them in their housing, protecting them from forced or abrupt bending and thus preventing breakage. As can be seen, the legs slide on two continuous grooves fixed to the ground with mechanical anchors. The two bases are also suitably shaped to prevent the leg slide wheels from popping out in case of uneven operation. Photo of the hydraulic pistons, central connections and adjustable limit switches. Both hydraulic pistons have valves so that the pressure differential can be read. Any sudden leak of oil from the circuit, resulting in an abrupt drop in pressure, activates the parachute valves, iediately closing the hydraulic connection to the piston itself, promptly locking the platform. 61
REX If the installation site presents problems, REX Gold 30 can have flanged connection beams (flanging on the upper beam) so that the unit can be set in the lift shaft unassembled. The central leg securing pin is inserted into a reinforcement on the legs themselves, thus ensuring greater resistance to wear. The photo shows the auxiliary lever connected to the back leg; it centers all the legs vs. the central axis of the unit and thus provides additional safety, preventing the structure from disengaging or improper lateral movement. In order to ensure that the whole assembly is extremely compact, the hydraulic unit - Electro-hydraulic pump and oil tank - is built as one with the electric control panel. The great accessibility of the hydraulic block, the speed control valves and the manometer controlling operating pressure make this maintenance and intervention on machine even simpler and safer. 62
The REX Gold 30 platform maximum height above ground is 4.10 mt and its standard load bearing capacity is 3,000 Kg (which can be increased to up to 4,000 Kg). Thanks to the lift syetry, the weight does not need to be centered on the platform itself, thus it can double as either goods lift or car lift. Despite its sturdiness, the REX Gold 30 (which weighs a total of 4,000 Kg) is extremely compact, requiring a pit of just 51 cm. Moreover, to ensure greater resistance to the weather and outside factors, the platform is fully galvanized. 63
REX Note the platform stop (standard) which ensures correct positioning of the vehicle from the front edge. This detail ensures utmost safety, preventing any abrupt forward movement of the vehicle while the platform is being moved. Another such stop is found at the back. The underlying part of the platform is supported by a steel skeleton that ensures utmost reliability. 64
The platform is composed of a series of galvanized panels which are both extremely sturdy - given the shape of the panels - and light. Detail of how compact the unit is. 65
REX The REX Gold 30 platform is the top of the line of all pantographic platforms (also called scissor lifts). REX Gold 30 has four mobile points at the ends of the two double legs, thus ensuring perfect syetry and preventing the need for any overhanging platform parts. Moreover, it has two outside valves installed on the so-called double effect hydraulic pistons. To lower the platform, pressurized oil must be fed into the pistons through the safety valves, thus controlling the rate at which it is lowered. Besides the standard buttons to operate movement, the pushbutton panel has a mushroom-shaped emergency button and an activation key. 66
TECHNICAL DATA SHEET AND ACCESSORIES REX 30 67
REX REX 30 68
TECHNICAL DATA SHEET AND ACCESSORIES REX 25 + T 69
REX TECHNICAL DATA SHEET AND ACCESSORIES Capacity Standard Lifting Height Max Lifting Height Minimum Platform Standard Platform Max Platform Net height Pit Power Speed Power supply Standard Weight Notes REX 30 /kg / 3000 6608 2450X5200 96,5X204,7 2850x5200 112,2x204,7 3000x6000 118,1x236,2 510 20,1 4 kw 5,5 / 10,2 hp 0,06 m/s 2,4 /s 3800 8370 REX 25 + T /kg / 2500 5507 2450X5200 96,5x204,7 2850x5200 112,2x204,7 3000x5560 118,1x218,9 2100 82,7 510 20,1 5,5 kw 5,5 / 10,2 hp 0,06 m/s 2,4 /s 5600 12335 tiles on the platform max 70 kg/m2 tiles on the platform max 70 kg/m2 REX 25 + TP /kg / 2500 5507 2450X5200 96,5x204,7 2850x5200 112,2x204,7 3000x5560 118,1x218,9 2100 82,7 510 20,1 5,5 kw 5,5 / 10,2 hp 0,06 m/s 2,4 /s 5600 12335 tiles on the platform max 70 kg/m2 tiles on the platform max 70 kg/m2 REX 30 F /kg / 3000 6608 2450X5200 96,5X204,7 2850x5200 112,2x204,7 3000x6000 118,1x236,2 510 20,1 4 kw 5,5 / 10,2 hp 0,06 m/s 2,4 /s 4000 8811 REX 25 F + T /kg / 2500 5507 2450X5200 96,5x204,7 2850x5200 112,2x204,7 3000x5560 118,1x218,9 2100 82,7 510 20,1 5,5 kw 5,5 / 10,2 hp 0,06 m/s 2,4 /s 5800 12775 REX 25 F + TP /kg / 2500 5507 2450X5200 96,5x204,7 2850x5200 112,2x204,7 3000x5560 118,1x218,9 2100 82,7 510 20,1 5,5 kw 5,5 / 10,2 hp 0,06 m/s 2,4 /s 5800 12775 tiles on the platform max 70 kg/m2 tiles on the platform max 70 kg/m2 70
accessories STANDARD ITEM OPTIONAL ITEM DESCRIPTION REX 30 REX 30 F notes Standard colours: BLU / BLUE RAL 5005 e/and ARGENTO / SILVER RAL 9006 Nr. 1 platform composed by hot galvanised slats Max. Travel 4.100 Max. Travel 3.500 Scissor coupling flange Nr. 2 pit bases plate Nr. 2 lifting cylinder Nr. 2 dead man push-button board Security control module for sensors and safety locks N.2 electromagnetic sensors included Nr. 1 hydraulic control unit with motor Power Supply: 380-415V/3Ph/50-60Hz N 2 stops wheels bars L=745 2 stops Mechanical and electrical safety devices Roof transiting capacity: 3000 (Not suitable to lift a vehicle) Roof supplied with diamond plate Roof for tiles application includes 3 cm. height perimeter frame Tles weight up to 70 Kg. square mt. Max - minimum travel 3000 - The pit dimensions are modified in order to take into account the tiles depth Nylon Package Screws anchor Undersized / oversized non standard platform Smooth plate platform set for tiles application Includes 3 cm. height perimeter frame - max. 70 square m Capacity until 8.800 Lbs. Additional Stop Additional push button board Safety lock for concertina and standard doors Additional electro - magnetic sensor Outside Pulse Recall for each Push Button Board Suitable only for closed shaft Pulse Coand Return to Home Position Button Suitable only for closed shaft Outside Infra-red Remote Control - Each Receiver max. 5 mt. distance Outside Infra-red Remote Control - Each Transmitter max. 5 mt. distance Flashing light Audible warning kit Two-colours tower light (Red / Green) Waterproof galvanised cover for control unit for outdoor installation Waterproof push-button board IP 65 Lifting speed increase from 0,05 to 0,10 m/s Energy Saving Soft Start Nr. 1 fixed handrail protection without grid H=1.200.(each meter) Nr. 1 removable handrail protection without grid H=1.200.(each meter)* Light Barriers Roof Car Presence Sensor (Nr. 2) Non standard colour* Push button board people lift design* Hot Galvanisation Roof Hot Galvanisation Wood Pallet for Rex Machine Wood Pallet for Platform Plates Control Panel Crate 71
accessories STANDARD ITEM OPTIONAL ITEM DESCRIPTION REX 25 + T REX 25 + TP note Standard colours: BLU / BLUE RAL 5005 e/and ARGENTO / SILVER RAL 9006 Nr. 1 platform composed by hot galvanised slats Max. Travel 4.100 Max. Travel 3.500 Scissor coupling flange Nr. 2 pit bases plate Nr. 2 lifting cylinder Nr. 2 dead man push-button board Security control module for sensors and safety locks Nr. 1 hydraulic control unit with motor Power Supply: 380-415V/3Ph/50-60Hz N 2 stops wheels bars L=745 2 stops Mechanical and electrical safety devices Roof transiting capacity: 3000 (Not suitable to lift a vehicle) Roof supplied with diamond plate Roof for tiles application includes 3 cm. height perimeter frame Tles weight up to 70 Kg. square mt. Max - minimum travel 3000 - The pit dimensions are modified in order to take into account the tiles depth Nylon Package Screws anchor Undersized / oversized non standard platform Capacity until 8.800 Lbs. Additional Stop Additional push button board Safety lock for concertina and standard doors Additional electro - magnetic sensor Outside Pulse Recall for each Push Button Board Suitable only for closed shaft Pulse Coand Return to Home Position Button Suitable only for closed shaft Outside Infra-red Remote Control - Each Receiver Max. 5 mt. distance Outside Infra-red Remote Control - Each Transmitter Max. 5 mt. distance Flashing light Audible warning kit Two-colours tower light (Red / Green) Waterproof galvanised cover for control unit for outdoor installation Waterproof push-button board IP 65 Lifting speed increase from 0,05 to 0,10 m/s Energy Saving Soft Start Nr. 1 fixed handrail protection without grid H=1.200.(each meter) Nr. 1 removable handrail protection without grid H=1.200.(each meter)* Light Barriers Roof Car Presence Sensor (Nr. 2) Non standard colour* Push button board people lift design* Hot Galvanisation Roof Hot Galvanisation Wood Pallet for Rex Machine Wood Pallet for Platform Plates Control Panel Crate 72
accessories STANDARD ITEM OPTIONAL ITEM DESCRIPTION REX 25 + TF REX 25 + TPF notes Standard colours: BLU / BLUE RAL 5005 e/and ARGENTO / SILVER RAL 9006 Nr. 1 platform composed by hot galvanised slats Max. Travel 4.100 Max. Travel 3.500 Scissor coupling flange Nr. 2 pit bases plate Nr. 2 lifting cylinder Nr. 2 dead man push-button board Security control module for sensors and safety locks Nr. 1 hydraulic control unit with motor Power Supply: 380-415V/3Ph/50-60Hz N 2 stops wheels bars L=745 2 stops Mechanical and electrical safety devices Roof transiting capacity: 3000 (Not suitable to lift a vehicle) Roof supplied with diamond plate Roof for tiles application includes 3 cm. height perimeter frame Tiles weight up to 70 Kg. square mt. Max - minimum travel 3000 - The pit dimensions are modified in order to take into account the tiles depth Nylon Package Screws anchor Undersized / oversized non standard platform Capacity until 8.800 Lbs. Additional Stop Additional push button board Safety lock for concertina and standard doors Additional electro - magnetic sensor Outside Pulse Recall for each Push Button Board Suitable only for closed shaft Pulse Coand Return to Home Position Button Suitable only for closed shaft Outside Infra-red Remote Control - Each Receiver Max. 5 mt. distance Outside Infra-red Remote Control - Each Transmitter Max. 5 mt. distance Flashing light Audible warning kit Two-colours tower light (Red / Green) Waterproof galvanised cover for control unit for outdoor installation Waterproof push-button board IP 65 Lifting speed increase from 0,05 to 0,10 m/s Energy Saving Soft Start Nr. 1 fixed handrail protection without grid H=1.200.(each meter) Nr. 1 removable handrail protection without grid H=1.200.(each meter)* Light Barriers Roof Car Presence Sensor (Nr. 2) Non standard colour* Push button board people lift design* Hot Galvanisation Roof Hot Galvanisation Wood Pallet for Rex Machine Wood Pallet for Platform Plates Control Panel Crate 73
74 TOTALREX
75
76 TOTALREX
The pantograph line also includes products which allow a person to remain on-board. This option is suitable for those cases where the distance traveled is less than 4 mt. or, for the same distance, wall anchoring is not possible. As seen in the photo, the person can operate the lift while seated in the vehicle (for the sake of clarity, the photographs were taken inside a building since it would be impossible to photograph the whole after being inserted in the pit). 77
TOTALREX Among other things, the wheel stops secured to the platform help ensure complete vehicle safety on-board. This system prevents the vehicle from oscillating back and forth once on the platform. One of the main characteristics of Omer SPA products is that weight is perfectly balanced on the platform, no matter where it is positioned. The system of Omer SPA units, in particular TOTAL REX, makes it possible to lift the platform while keeping it perfectly parallel to the ground, without any torsion or bending at all. On the short sides of the platform, TOTAL REX has two photoelectric barriers that block the vehicle iediately and automatically as soon as they come into contact with the vehicle itself, thus protecting the vehicle from contact with the surrounding wall. 78
This photo shows the photocell fit inside a galvanized iron structure that protects both the transmission system (and receiver) and the electrical connections. TOTAL REX is one of the few vehicle elevators on the market that allows a person to remain on-board and is also one of the most reliable car lifts on the market. The various electrical connections of the pushbutton control panel to the electrical panel run through special aluminum ducts that prevent deterioration and tampering. The photo shows how carefully the product is manufactured. The position of the control panel is specially designed so that, when the vehicle stops, the driver can easily reach through the window to operate the lift while comfortably seated in the vehicle. 79
TOTALREX The pushbutton panel also has normal controls to reach the desired floor as well as emergency buttons and an interphone to counicate with the outside using a telephone dialer. Here is another detail of electrical connection to the control panel. Note the aluminum duct the connections pass through. The maintenance panel allows the operator to move the unit from various positions, thus providing access under special circumstances and in full safety. The pushbutton control panels on the various floors are used to call the lift; these panels also have safety keys to keep out unautherised users. The pushbutton panel has class IP 65 protection rating against outside factors. 80
The overall view of the electric-hydraulic unit clearly shows how compact the unit is; further indicate that control unit installation does not require much space. Detail of the lock for manual control of the doors (optional). Electrical control panel normally installed on the wall above the hydraulic unit. The photo shows the telephone receiver used to contact the intercom on the platform. The telephone dialer, located on the electrical panel, can repeat dial seven numbers, continuing the first available number answers. The device has 22 country codes, thus adapting the unit to the national telephone network. Magnetic sensor controls opening of the motorized doors. Connection to the control unit enables or disables automatic opening of the doors. (standard). 81
82 TOTALREX
TOTALREX 30 PF 83
TOTALREX TOTALREX 25+T 84
TOTALREX 30 85
TOTALREX schede tecniche ed accessori Capacity Standard Lifting Height Max Lifting Height Minimum Platform Standard Platform Max Platform Net height Pit Power Speed Power supply Standard Weight Notes REX 30 /kg / 3000 6608 2450X5200 96,5X204,7 2850x5200 112,2x204,7 3000x6000 118,1x236,2 510 20,1 4 kw 5,5 / 10,2 hp 0,06 m/s 2,4 /s 3800 8370 REX 25 + T /kg / 2500 5507 2450X5200 96,5x204,7 2850x5200 112,2x204,7 3000x5560 118,1x218,9 2100 82,7 510 20,1 5,5 kw 5,5 / 10,2 hp 0,06 m/s 2,4 /s 5600 12335 tiles on the platform max 70 kg/m2 tiles on the platform max 70 kg/m2 REX 25 + TP /kg / 2500 5507 2450X5200 96,5x204,7 2850x5200 112,2x204,7 3000x5560 118,1x218,9 2100 82,7 510 20,1 5,5 kw 5,5 / 10,2 hp 0,06 m/s 2,4 /s 5600 12335 tiles on the platform max 70 kg/m2 tiles on the platform max 70 kg/m2 REX 30 F /kg / 3000 6608 2450X5200 96,5X204,7 2850x5200 112,2x204,7 3000x6000 118,1x236,2 510 20,1 4 kw 5,5 / 10,2 hp 0,06 m/s 2,4 /s 4000 8811 REX 25 F + T /kg / 2500 5507 2450X5200 96,5x204,7 2850x5200 112,2x204,7 3000x5560 118,1x218,9 2100 82,7 510 20,1 5,5 kw 5,5 / 10,2 hp 0,06 m/s 2,4 /s 5800 12775 REX 25 F + TP /kg / 2500 5507 2450X5200 96,5x204,7 2850x5200 112,2x204,7 3000x5560 118,1x218,9 2100 82,7 510 20,1 5,5 kw 5,5 / 10,2 hp 0,06 m/s 2,4 /s 5800 12775 tiles on the platform max 70 kg/m2 tiles on the platform max 70 kg/m2 accessories STANDARD ITEM OPTIONAL ITEM DESCRIPTION REX 30 REX 30 F notes Standard colours: BLU / BLUE RAL 5005 e/and ARGENTO / SILVER RAL 9006 Nr. 1 platform composed by hot galvanised slats nr. 1 warning siren Max. Travel 4.100 Max. Travel 3.500 Scissor coupling flange 86
accessories STANDARD ITEM OPTIONAL ITEM DESCRIPTION REX 30 REX 30 F notes Nr. 2 pit bases plate Nr. 2 lifting cylinder Nr. 2 Light Barriers H=500. Nr. 1 Coand Board on the platform Nr. 2 dead man push-button board Add. Push Button Board with Upright for double Entrance/Exit Security control module for sensors and safety locks N.2 electromagnetic sensors included Nr. 1 hydraulic control unit with motor Power Supply: 380-415V/3Ph/50-60Hz N 2 stops wheels bars L=745 2 stops Mechanical and electrical safety devices Roof transiting capacity: 3000 (Not suitable to lift a vehicle) Roof supplied with diamond plate Roof for tiles application includes 3 cm. height perimeter frame Tiles weight up to 70 Kg. square mt. Max - minimum travel 3000 - The pit dimensions are modified in order to take into account the tiles depth Nylon Package Screws anchor Undersized / oversized non standard platform Smooth plate platform set for tiles application Includes 3 cm. height perimeter frame - max. 70 square m Capacity until 8.800 Lbs. Additional Stop Additional push button board Safety lock for concertina and standard doors Additional electro - magnetic sensor Outside Pulse Recall for each Push Button Board Suitable only for closed shaft Pulse Coand Return to Home Position Button Suitable only for closed shaft Outside Infra-red Remote Control - Each Receiver Max. 5 mt. distance Outside Infra-red Remote Control - Each Transmitter Max. 5 mt. distance Flashing light Audible warning kit Two-colours tower light (Red / Green) Waterproof galvanised cover for control unit for outdoor installation Waterproof push-button board IP 65 Lifting speed increase from 0,05 to 0,10 m/s Energy Saving Soft Start Nr. 1 fixed handrail protection without grid H=1.200.(each meter) Nr. 1 removable handrail protection without grid H=1.200.(each meter)* Light Barriers Roof Car Presence Sensor (Nr. 2) Non standard colour* Push button board people lift design* Hot Galvanisation Roof Hot Galvanisation Wood Pallet for Rex Machine Wood Pallet for Platform Plates Control Panel Crate 87
accessories STANDARD ITEM OPTIONAL ITEM DESCRIPTION REX 25 + T REX 25 + TP notes Standard colours: BLU / BLUE RAL 5005 e/and ARGENTO / SILVER RAL 9006 Nr. 1 platform composed by hot galvanised slats Max. Travel 4.100 Max. Travel 3.500 Scissor coupling flange Nr. 2 pit bases plate Nr. 2 lifting cylinder Nr. 2 dead man push-button board Security control module for sensors and safety locks Nr. 1 hydraulic control unit with motor Power Supply: 380-415V/3Ph/50-60Hz N 2 stops wheels bars L=745 2 stops Mechanical and electrical safety devices Roof transiting capacity: 3000 (Not suitable to lift a vehicle) Roof supplied with diamond plate Roof for tiles application includes 3 cm. height perimeter frame tiles weight up to 70 Kg. square mt. Max - minimum travel 3000 - the pit dimensions are modified in order to take into account the tiles depth Nylon Package Screws anchor Undersized / oversized non standard platform Capacity until 8.800 Lbs. Additional Stop Additional push button board Safety lock for concertina and standard doors Additional electro - magnetic sensor Outside Pulse Recall for each Push Button Board suitable only for closed shaft Pulse Coand Return to Home Position Button suitable only for closed shaft Outside Infra-red Remote Control - Each Receiver max. 5 mt. distance Outside Infra-red Remote Control - Each Transmitter max. 5 mt. distance Flashing light Audible warning kit Two-colours tower light (Red / Green) Waterproof galvanised cover for control unit for outdoor installation Waterproof push-button board IP 65 Lifting speed increase from 0,05 to 0,10 m/s Energy Saving Soft Start Nr. 1 fixed handrail protection without grid H=1.200.(each meter) Nr. 1 removable handrail protection without grid H=1.200.(each meter)* Light Barriers Roof Car Presence Sensor (Nr. 2) Non standard colour* Push button board people lift design* Hot Galvanisation Roof Hot Galvanisation Wood Pallet for Rex Machine Wood Pallet for Platform Plates Control Panel Crate 88
accessories STANDARD ITEM OPTIONAL ITEM DESCRIPTION REX 25 + TF REX 25 + TPF notes Standard colours: BLU / BLUE RAL 5005 e/and ARGENTO / SILVER RAL 9006 Nr. 1 platform composed by hot galvanised slats Max. Travel 4.100 Max. Travel 3.500 Scissor coupling flange Nr. 2 pit bases plate Nr. 2 lifting cylinder Nr. 2 dead man push-button board Security control module for sensors and safety locks Nr. 1 hydraulic control unit with motor Power Supply: 380-415V/3Ph/50-60Hz N 2 stops wheels bars L=745 2 stops Mechanical and electrical safety devices Roof transiting capacity: 3000 (Not suitable to lift a vehicle) Roof supplied with diamond plate Roof for tiles application includes 3 cm. height perimeter frame tiles weight up to 70 Kg. square mt. Max - minimum travel 3000 - the pit dimensions are modified in order to take into account the tiles depth Nylon Package Screws anchor Undersized / oversized non standard platform Capacity until 8.800 Lbs. Additional Stop Additional push button board Safety lock for concertina and standard doors Additional electro - magnetic sensor Outside Pulse Recall for each Push Button Board suitable only for closed shaft Pulse Coand Return to Home Position Button suitable only for closed shaft Outside Infra-red Remote Control - Each Receiver max. 5 mt. distance Outside Infra-red Remote Control - Each Transmitter max. 5 mt. distance Flashing light Audible warning kit Two-colours tower light (Red / Green) Waterproof galvanised cover for control unit for outdoor installation Waterproof push-button board IP 65 Lifting speed increase from 0,05 to 0,10 m/s Energy Saving Soft Start Nr. 1 fixed handrail protection without grid H=1.200.(each meter) Nr. 1 removable handrail protection without grid H=1.200.(each meter)* Light Barriers Roof Car Presence Sensor (Nr. 2) Non standard colour* Push button board people lift design* Hot Galvanisation Roof Hot Galvanisation Wood Pallet for Rex Machine Wood Pallet for Platform Plates Control Panel Crate 89