special parts BMW F800&Adventure GS Handlebar Cockpit Windscreens Lighting from p. 387 Seats page from p. 399 Suspension from p.

BMW F800&Adventure 700 650GS special parts 1 2 3 4 5 6 7 Handlebar Cockpit Windscreens Lighting from p. 387 Seats page from p. 399 Suspension from p. 402 Engine guard Cylinder protection Fairing from p. 410 Tank bags from p. 424 Tail rack bags from p. 426 Pannier systems from p. 430

6 5 1 7 2 3 4

386

Fairing, Windscreen BMW F800 F700 650GS 387 Desierto F Fairing for BMW F800GS/F700GS/F650GS (Twin) When the stylish fairing was being developed attention was focussed mainly on suitability for the purpose and individuality. The Desierto F s screen can not only be fitted easily but also has an infinite variety of adjustment options. Here we have managed to design an individual, modern look for the F 800/650 GS (Twin), combined with the highest level of everyday benefits. The main feature is that the screen can be adjusted as you like. The screen can be adjusted completely to the rider s personal requirements without any set pattern. Thus the windscreen can be adjusted highly effectively and quickly to suit any situation. Air flow and annoying wind noise can thus be practically eliminated. The height and inclination of the screen can be adjusted as well as the distance from the fairing (important for eliminating annoying airflow). This can be done easily in a few seconds with a standard size 10 open ended spanner. With these fittings your F 800/650 GS (Twin) is an absolute eye catcher with the highest level of driving comfort. Colour: black 048-1003 BMW F700GS / BMW F800GS from 2013 048-1002 F800GS / F650GS (Twin) up to 2012

388 Spoiler for Windscreen This special spoiler for the windscreen of the F800GS and F650GS (Twin) is perfect for undertaking long, fast motorbike journeys in comfort. There is a significant reduction in turbulence and wind pressure against the helmet. It simply fits onto the windscreen, and is secured using the snap closure. When going off-road, the spoiler is easy to remove in seconds. 048-0414 BMW F 650 GS (Twin) 048-0419 BMW F 800 GS Spoiler for Windscreen *Lockable* A high quality brand lock secures the spoiler against unauthorised removal. The locks are also avilable with the same closure as our ZegaCase and GPS bracket locks. 048-0415 BMW F 650 GS (Twin) 048-0420 BMW F 800 GS Mirror Extension for BMW F800GS/F700GS/F650GS (Twin) The mirror extension puts the mirror in a much better position. This improves the rider s field of vision. This discreet component increases safety and is almost unnoticeable. It s a must for anyone who wants to see more than just their arms in the mirrors. Parts supplied: left and right side 040-0648 Cockpit Shield BMW F800GS/F650GS (Twin) The cockpit shield enhances the appearance of the front section of the F800GS/F650GS. It creates a visual link between the tachometer and the headlight, and conceals connections and cables. The black plastic shield is easy to fit behind the windscreen. - Can be used with the instrument cover 048-0430 048-0445

BMW F800 F700 650GS 389 Windscreen BMW F800GS/F700GS/F650GS (Twin) Lots of riders of the F800/F650GS (Twin) would like a better wind protection, because the original windscreen is extremely sporty in design. We provide it with the high screen! The Touratech windscreen is much bigger, and has a different aerodynamic shape. The resulting improved wind protection reduces the (wind) pressure on the rider, which results in much more relaxed riding. Turbulence around the helmet is minimised and protection against the weather improved. The windscreen is simply fitted in place of the regular one. It is attached at the same points. (For mounting the windshield onto the F 700 GS the original BMW adapter 77 33 8 531 603 is required). Height: 350 mm, width: 310/360 mm. 048-0370 048-0372 (tinted) Pic.: Martin Wickert Iceland

390 Instrument Cover BMW F800GS(-2012)/F650GS (Twin) The instrument cover gives the cockpit a much clearer appearance. It is easy to attach directly behind the windscreen. The integrated on-board socket with fuse makes it easy to connect a GPS device or mobile phone. Made of black powder-coated aluminium. - Can be used with the cockpit shield 048-0445 048-0430 048-0431 with two sockets Crossbar BMW F800GS/F700GS/F650GS (Twin) For some time now, many enduro bikes have not been equipped with a crossbar. Many streetfighters with high handlebars don t have one, although it is ideal for mounting some interesting accessories: - Roadbook holders - GPS receivers - Motorcycle computers - Map holders - and many more To fit all these accessories you will need to mount our crossbar. The original handlebars are retained. The handlebar middle strut is made of high quality, specially adapted aluminium parts, and is simply screwed on later. 040-0603 Kaoko Cruise Control mechanical cruise control BMW F800GS ADV /F700GS/F650GS (Twin) The original by the South African inventor! The Kaoko Cruise Control replaces the original handlebar end weights. The anti-slip knurled screw secures the accelerator in position. This significantly reduces the strain on the right hand during long journeys. Thanks to the continuous adjustment, the accelerator can also be fixed to decelerate very gently - leaving you enough time to take your hand off the handlebar for a moment without immediately losing throttle. Despite that, the motorbike decelerates in a gentle and controlled way. 048-0600 (with OEM handguards >2012) 048-0601 (without OEM handguards>2012) 610-0099 (F700GS/F800GS ADV 2013>)

Folding Mirror, Length Adjustable Universal folding mirror, length and angle continuously adjustable, to suit most motorbikes. - Suitable for use on left or right - Including the appropriate mounting adapter, e.g. BMW G450X, F650 (single cylinder) Yamaha XT 660, Suzuki V-Strom, Triumph Tiger, Honda Transalp, Varadero, Africa Twin, KTM 640/690 Adv, KTM LC8 950/990/SE - carries the E test mark. 040-0760 Mounting Adapter (1 unit) - Required for the BMW F800/650 GS (Twin), HP2 and R1200GS/Adv. 040-0761 Cockpit, Handlebar, Windscreen BMW F800 F700 650GS 391 Folding brake lever + clutch lever set, F800GS (-2012)/F650GS(Twin) Our brake and clutch levers are made from highstrength aluminium and have multiple adjustment settings. This enables the grip width to be set individually. Having the lever in the right position for your hand size and the way you ride means fatigue-free riding even on long journeys and challenging roads. The additional folding function together with the defined, predetermined breaking point ensures maximum safety and allows you to continue riding even after a fall. 048-5645 black 048-5646 silver Adjustable Levers BMW F800GS(-2012)/F650GS (Twin) The perfect lever length, an ergonomic shape and pleasantly rounded lines help you to apply just the right amount of braking force. The lever allows for selection from any of 6 positions to perfectly adjust it for any hand size. The adjustment lever has a protruding knob that fits particularly well in the hand, thus facilitating adjustment even while riding. The lever mechanism is carried on highly durable brass bushes. A generous recess at the end of the lever serves as a predetermined breaking point, and ensures that the lever can still be used even after a fall. The lever is a development by AC Schnitzer, where it is anodised in titanium for us. 610-0400 Adjustable brake lever 612-0340 Adjustable clutch lever (F800GS ADV) Must be fitted in conjunction with compression piece 610-0407 on vehicles produced from 11/2011 onwards.

392 Handlebar Height Increase 20 mm BMW F800GS/ADV/F700GS/F650GS (Twin) Those who like to go off-road and do so frequently, will find the 20 mm handlebar height increase indispensable. It makes it much easier to ride while standing. It also facilitates a pleasanter, more relaxed position while sitting. Significantly increases touring comfort. It takes just moments to fit the handlebar height increase. Delivery includes screws and TÜV certificate. 048-0150 Handlebar Protector Rubber BMW F800GS/ADV/700GS/F650GS (Twin) The handlebar clamp is an often ignored potential source of danger in off-road use. However, so that nothing unpleasant happens in the event of a fall, we have developed a handlebar protector that will benefit your health by absorbing the impact of your helmet. A little thing that could make a big difference! 048-0410 Horn Button Protection for BMW F800GS(up to 2012)/ F650GS (Twin) You know the problem: with a fully packed tank bag and the handlebar turned nearly all the way, the horn button is pressed accidentally. With our 1.5 mm thick, powder-coated stainless steel horn protection, the problem is gone for good. The horn protection is easily fitted with the existing instrument screw and is hardly noticeable. The functionality of the horn is not impaired in any way. 044-3034

BMW F800 F700 650GS 393 GPS Handlebar Bracket Adapter BMW F800GS/ADV/F700GS/F650GS (Twin) The bracket adapter is simply fitted to the handlebar mounting clamps on your BMW. Our GPS brackets all fit perfectly on its 12-mm brace. For easy, safe attachment of your GPS. With virtually no impairment of the view of the instruments. 048-0210 Guard for Brake Fluid Container Handlebars 048-0240 Passers-by simply love playing with the cap on the brake fluid container. Over time, this will impair the action of the cap safety mechanism. The guard will prevent this, and protect the whole container. Easily and quickly fitted. BMW F800GS (bis 2012)/F650GS (Twin) 048-0408 plastic guard 048-0240 aluminium guard BMW F800GS (ab 2013) & ADV / F700GS 048-5110 aluminium guard Rear brake fluid reservoir guard Stainless Steel On the BMW the brake fluid reservoir is all too easily accessible, putting it at risk of damage or tampering. Made from laser-cut stainless steel, Touratech s brake fluid reservoir guard effectively prevents damage and undesired access to the reservoir lid, yet you can still easily see the fluid level. The guard simply bolts onto the existing mounting point. BMW F800GS to 2012/F650GS(Twin) 048-5031 BMW F800GS from 2013 & ADV / F700GS 048-5030 048-5031 048-0408 048-5110 048-5030 NEW PART PART

394 Touratech Hand Protectors GD for BMW F800GS/F700GS/F650GS (Twin) These hand protectors are made of virtually indestructible plastic; they are modern in design, offer a high level of protection, and can easily be fitted to the F650/800GS using the fitting sets (included). The hand protector can be combined with various spoilers and then offers optimum protection against wind and weather. A very strong, sturdy construction which has proved itself time and again in many rallies and on other motor cycles - Many colours available (Note: Hand protectors and spoilers not available in BMW colours). - Colours for hand protectors and spoilers can be combined at random - Vibration isolation maintained (100%) - For use in conjunction with heated grips - Includes special adapters when fitted to F 650 GS (Twin) / F 800 GS - Hand protector colours: black (X=1), white (X=5), red (X=4), yellow (X=2), blue (X=3) - Spoiler (colour impregnated plastic) available in black (X=1), white (X=5), red (X=4), yellow (X=2), blue (X=3) When ordering, please substitute the X on the end of the order number for the number in brackets. Hand protectors F800GS/F700GS/650 GS(Twin): F650GS (Twin) - Handprotectors GD for steel handlebars 040-708X F800GS (up to 2012)- Handprotectors GD for aluminium handlebars 040-668X F800GS (from 2013)- Handprotectors GD for aluminium handlebars 048-566X F700GS - Handprotectors GD for aluminium handlebars 048-565X Spoiler for Touratech Hand Protectors GD 040-730X End Caps for Hand Protectors GD for BMW F 800 GS Touratech end caps let you create visual highlights in colours to match your bike. - Individually interchangeable with many hand protectors, oil filler plugs and frame plugs - Made from colour anodised aluminium. 1 unit per pack. For handguards please order 2 pieces. 040 5904 End caps M8 gold 040 5905 End caps M8 red 040 5906 End caps M8 black 040 5907 End caps M8 titan

Side Lids BMW F800GS (up to 2012) Side Lids, Hand Protectors BMW F800 F700 650GS 395 In order to emphasise the lines of the F 800 GS, we have developed a set of beautifully shaped side lids for the new BMW touring bike. The side lids create a visual link between the tank mockup and the cover of the rear tank. They also cover the visible and unsightly screw fixtures on the rear frame. The seat lock remains in easy reach. Painted in the matching BMW colours, the side lids blend smoothly with the overall appearance of the F 800 GS. Parts supplied: 2 parts (left and right) BMW F800GS 048-0446 dark magnesium metallic matt 048-0454 sunset yellow 048-0440 black LED Fog Lamp and Auxiliary Headlight, BMW F800GS/Adventure/F650GS enjoy all the benefits of modern LED technology on your motorbike! Kill several birds with one stone with the Touratech LED auxiliary headlights: greater active safety: better illumination of the field of vision with a much clearer light/dark boundary lowest possible scatter of the light beam in height with fan-shaped illumination in the width improved contrasts thanks to the white, daylight-like LED light greater passive safety: low power consumption, i.e. the auxiliary headlights can even be used permanently with weak alternators or lots of users no need for replacement lights thanks to the extremely long-lasting, maintenance-free LED elements All this combined with a Touratech attachment that is specially tailored to your vehicle! BMW F800GS (- 2012) LED auxiliary light set left + right fog, silver LED auxiliary light set left + right fog, black LED auxiliary set light fog right/beam left, silver LED auxiliary set light fog right/beam left, black 048-5470 048-5471 048-5472 048-5473 BMW F800GS/ADV (2013 - Illustr. similar) 048-5482 048-5484 BMW F650GS Twin 048-5474 048-5477 Headlight protector for LED auxiliary headlight (set) 040-5467 anodised black aluminium 040-5466 anodised natural aluminium 040-0566 040-0567

396 Xenon Halogen Xenon Headlights We turn night into day! Xenon headlights have a much high output than conventional halogen headlights, although they require only a small amount of power (3200 as opposed to 1500 lumen). This, and the fact that the colour of the light is very similar to daylight, makes it much easier to see at night. Which in turn leads to a significant increase in driving safety and comfort. Try them once, and you won t want to go back. TÜV-certified and with special brackets, all attachment materials and detailed instructions. Left side only. All Xenon control units by Touratech are protected against strong vibrations. F650GS (Twin) F800GS Fog Lights Visually similar to Xenon headlights, the fog lights offer a distinct safety advantage in rain, fog and snow. They can also be mounted together with our Xenon headlights. TÜV-certified and with special brackets, all attachment materials and detailed instructions. 048-0260 Fog lights left BMW F650GS (Twin) 048-0262 Fog lights left BMW F800GS (up to 2012) 048-0264 Fog lights right BMW F650GS (Twin) 048-0266 Fog lights right BMW F800GS (up to 2012) 048-0270 Xenon headlights left BMW F650GS (Twin) 048-0273 Xenon headlights left BMW F800GS (up to 2012) 048-0276 Fog/Fog lights BMW F800GS (up to 2012)/ BMW F650GS (Twin) 048-0280 Xenon/Fog lights BMW F800GS (up to 2012)/ BMW F650GS (Twin)

Daytime Running Lights for BMW F800GS(up to 2012) Unmissable powerful dominant LEDayFlex! The LEDayFlex daytime running lights system that we use is accommodated in a specially developed body for optimum mounting on the BMW. We have combined advanced design and innovative lighting technology into a perfect unit. - 30x longer lasting than an H7 bulb - A row of brilliant white lights - 5 lamps in one unit - Each lamp has 5 diodes and one high-power LED - Lentil-shaped, computer-designed lens - Metal housing protects lamp and gives best heat dissipation - Low power consumption at just 8 watts (approx.) - Delivery without German TÜV Type Approval. 048-0286 Lighting BMW F800 F700 650GS 397 048-5095 Steel Headlight Protector BMW F800GS ADV /F700GS/F650GS (Twin) Even the biggest rocks won t damage your headlight with our steel headlight protector. It consists of a strong corrugated grid that is welded directly to the frame, and is completely powder-coated. Assembly is as straightforward as you would think, and it is attached directly to the headlight bracket of your BMW. No need for drilling or major conversions! This headlight protector has been developed for off-road use. 048-0255 048-0255 Stainless steel headlight protector, black, with quick release fastener BMW F800GS ADV/ F650GS(Twin) 048-5095 048-5090 Headlight protector Makrolon with quick release fastener for BMW F800GS/ F650GS(Twin)/F700GS) 048-5090 NEW PART PART

398 Anti-Glare Shield BMW F800GS ADV /F700GS/F650GS (Twin) The new anti-glare shield really enhances your BMW F800GS/F650GS (Twin) look. It reduces scattered light, especially when fitted together with headlight covers and thus protects you from being dazzled by the lights too. The Touratech anti-glare shield has an extremely positive effect on the appearance of BMW s original headlight. It makes the whole headlight look more appealing. 048-0425 LED Indicators for BMW F800GS ADV / F700GS/F650GS (Twin) NEW PART PART The matching LED indicators are now available to go with the LED rear light on your BMW F800GS/ F650GS. They are notable for being exceptionally long-lasting. They won t burn-out like ordinary bulbs do! They are not sensitive to vibrations, weigh very little - and are visually a complete delight! The set consists of all 4 flashers plus the attachment materials. Carries the EU test mark, so there s no need to have your records changed. 048-0295 Adjustment bracket adapter kit for original BMW LED auxiliary headlights for BMW F 800 GS (2013 onwards) and F 800 GS-ADV This Touratech adjustment bracket adapter kit for the F 800 GS lets you swivel the original BMW LED auxiliary headlights horizontally by an additional 4. Plus they are fitted 20 mm lower with the bracket, which is made from 3 mm thick stainless steel. These minor adjustments give you more individual illumination of the road to keep you safer! 048-5481

Indicators, Seats BMW F800 F700 650GS 399 Seat Touring This seat significantly increases seating comfort, especially on long stretches. The reason: the ultra-bi-elastic yet strong outer material, which makes the padding even more efficient. The integrated recess relieves the pressure on the coccyx and distributes the driver s weight over the whole seat. Thanks to the offset seams on the side and slim shape of the seat, there is no pressure against the thighs. All in all, a wonderful and comfortable seat for your BMW! BMW F800GS/700GS/650GS (TWIN) Seat *Touring* black 048-5912 (low) Height 50 cm 048-5913 (standard) Height 52 cm 048-5914 (high) Height 54 cm Seat *Touring* *Breathable* black 048-5916 (standard) Height 52 cm 048-5917 (high) Height 54 cm BMW F800GS Adventure Seat *Touring* black 048-5900 (low) Height 50 cm 048-5901 (standard) Height 52 cm 048-5902 (high) Height 54 cm Seat *Touring* *Breathable* black 048-5903 (standard) Height 52 cm 048-5904 (high) Height 54 cm NEW PART PART Seat *Breathable* The breathable seat offers tremendous advantages over the standard one, especially at high temperatures. It enables the air to circulate inside the seat, which efficiently eliminates perspiration in the seat area. This in turn helps to prevent the underclothing from sticking and wrinkling. The innovative padding has a special recess which significantly increases the seating comfort, and the hard-wearing outer material in GoreTex copes easily with even the toughest conditions. 055-2240 (standard) Height 52 cm 055-2242 (high) Height 54 cm The information on seat heights always relates to our definition on page 1118.

400

BMW F800 F700 650GS Tank Conversion Kit BMW F800GS(up to 2012)/F650GS (Twin) Unfortunately, it is not quite easy to increase the BMW F800GS/F650GS tank volume and reach. Therefore we have decided to increase the total volume to 36 litres (including the standard tank). This conversion kits turns the BMW F800GS/F650GS into a true long-distance motorbike. All the necessary fitting materials are included. 401 F800GS, unpainted 048-0380 F800GS, black/yellow 048-0384 F800GS, white 048-0386 F800GS, black/lava orange 048-0388 F650GS(Twin), unpainted 048-0390 Progressive Replaceable Fork Springs for BMW F800GS(up to 2012) with Large Tank Strongly recommended for use with our BMW F800GS tank conversion. The progressive springs are perfectly matched to the F800GS with our large tank and offer a significantly improved response and greater safety in extreme situations, even with the higher weight on the front wheel. Delivery includes detailed installation instructions, the correct fork oil and a paste to improve the slippage of the dip tubes. 040-7408

402 Lowering KIT *-7 cm* for BMW F800GS up to 2012 *Shock absorber, fork springs and seat* The stable and safe way to lower your bike: Lowering kit for the BMW F800GS. For all those who want to enjoy that lowered feeling while still maintaining their stability and safety, we now offer a lowering kit for the BMW F800GS (as of model year 2008). With all its components, this kit will lower the motorcycle by 7 cmwithout sacrificing any balance, performance or ride quality. This kit consists of the following items: the low seat for the BMW F800GS (-2 cm), Touratech Level 2 shock absorbers, which are perfectly suited for lowering the seat height, and progressive fork springs from Hyperpro (-5 cm). Altogether, these parts will lower your bike by 7 cm. At the same time, you won t have to accept any compromises in balance, performance or ride quality with your BMW F800GS. Furthermore, the adjustment range of the load compensation for luggage weight remains fully intact. Lowering KIT Level 2 *-7 cm* for BMW F800GS -2012 * Shock absorber, fork springs and seat* 048-5841 Lowering KIT Level 2 *-7 cm* for BMW F800GS 2013- * Shock absorber, fork springs and seat* 048-5842 Lowering KIT Level 2 *-7 cm* for BMW F800GS Adventure * Shock absorber, fork springs and seat* 048-5843 Please note: To ensure the parked stability of your BMW F800GS after it has been lowered, we recommend using shorter kick stand and/ or the centre stand. These parts are available from your BMW dealer..

Suspension, shock absorbers BMW F800 F700 650GS 403 NEW PART PART Hyperpro Height Lowering Kit, BMW F800/700GS The set includes replacement fork springs and a replacement spring for the shock absorber. This spring set provides you with a sensible reduction in height without affecting the riding properties - at the expense of a little ground clearance. The progressive springs have been designed to match the F800GS perfectly, and offer a tremendous improvement in response and greater safety in extreme situations. Replacing the front and rear springs will lead to a significant improvement in your suspension system. Delivery includes detailed installation instructions, the correct fork oil and a paste to improve the slippage of the dip tubes. Height lowering kit, 50mm, for BMW F800GS *to 2012* 040-7402 Height lowering kit, 20mm, for BMW F800GS/ADV *from 2013* 048-5834 Height lowering kit, 35 mm, for BMW F800GS/ADV *from 2013* 048-5835 Height lowering kit, 30mm, for BMW F700GS *from 2013* 058-5838 Progressive replacement springs BMW F800GS7ADV *from 2013* without lowering 048-5836 Progressive replacement springs BMW F800GS *to 2012* without lowering 040-0701

404 Progressive fork springs These progressive springs have been designed to match the BMW F800GS perfectly, offering a tremendous improvement in response and greater safety in extreme situations than the original fork springs. Progressive fork springs for BMW F800GS *to 2012* 040-7400 Progressive fork springs for BMW F800GS/Adventure *from 2013* 048-5839 Progressive fork springs for BMW F700GS *from 2013* 058-5836 Progressive fork springs, BMW F650GS (Twin) 040-7407 Progressive fork springs for BMW F800GS (up to 2012) 50 mm lowering Replacement fork springs for lowering the front end by Dutch suspension specialists Hyperpro. This spring set provides you with a practical 50 mm reduction in height without worsening the riding characteristics - at the expense of a little ground clearance. These progressive springs have been designed to match the BMW F800GS perfectly, offering a tremendous improvement in response and greater safety in extreme situations than the original fork springs. 040-7411 F800GS to 2012 040-7438 F800GS/ADV from 2013

PART PART BMW F800 F700 650GS 405 Touratech Suspension F 800 GS / F 650 GS (Twin) Many advantages to other high-end brands! Touratech Suspension has been designed by Tractive Suspension. Tractive has specific, profound exper-tise of the Touratech type of motorbike models. As an example, the people at Tractive designed most of the shocks used by BMW Motorrad since the last 10 years. They therefore understand the specific user and reliability requirements as no one else does. The shocks were developed for traction, comfort, dynamic safety, reliability and light weight. Every shock has been test driven with Touratech customers in mind. The shocks have been succesfully tested on durability 4 times stricter than the original BMW standards. Detailed information on Touratech suspension and available variants can be found starting on page 1242! NEW BMW Typ: Level1 Level2 F800GS Adventure 048-5881 F800GS (from 2013) 048-5863 048-5883 F800GS (to 2012) 048-5860 048-5880 F700GS 058-5863 058-5883 F650GS (twin) 048-5862 048-5882 F800GS Adventure lowering appr. -50 mm 048-5884 F800GS (all years of construction) lowering appr. -50 mm 044-5864 BMW Typ: High End F800GS (from 2013) 048-5868 F800GS (to 2012) 048-5865 BMW Typ: Extreme Level 2 electric F800GS (from 2013) 048-5873 048-5885 F800GS (to 2012) 048-5870 048-5885

406 NEW PART PART Touratech Suspension shock absorber for BMW F800GS Adventrue from 2013 type *Inline Extreme* The Touratech Suspension Inline Extreme shock absorber ranks in the absolute premium class of suspension components. This Extreme Shock has been developed specifically for the limited space of the BMW F800GS adventure. It is perfectly suited to touring and riding with frequent dramatic changes in loading and riding conditions, and the most extreme demands. Even with this compact size, our PDS is installed. A hydraulic punch of protection with full luggage prevents the penetration even at extreme slope conditions. Even fully laden with luggage under the most extreme off-road conditions, the bike will not bottom out and the shock absorber is protected against mechanical overload. Damping characteristics change depending on the road surface. When riding under most conditions, the shock absorber is comfortably adjusted for a less strenuous ride. This means for you: Any luggage volume of the rear bag to baggage loaded system and / or pillion rider in this Extreme setting. The balance of the motorcycle can be easily and quickly adjusted by hand wheel on the hydraulic spring preload from you again. The very fine adjustable damping gives the shock every time an effective, precise and to your personal driving style adapted suspension setting for each road condition and use. An absolute WORLD PREMIER for an entirely new driving experience with your bike. 048-5874

shock absorbers, Fork Protector BMW F800 F700 650GS 407 Decal Set Fork BMW F 800 GS/ Adventure Absolutely strong, thick film protects the fork against stones and other types of damage. Black film with white print. Very easy to apply - strong adhesive. 100-0505 (for both sides) Multitool Front Fork Adjustment BMW F800GS/F650GS Like to have the right tools with you at all times? Not a problem with the Touratech Multitool! Not only can you adjust the front fork at any time using the Multitool, but in an emergency it will also loosen and tighten practically every screw connection, including the mirror, on the F800GS/F650GS (Twin). The secret: it disappears inside the bracket of the original fork key! 048-0221 BMW F800GS/ ADV Neopren Fork Protector The new Neopren Fork Protectors effectively protect the stanchions of the USD fork from mud, dirt and stones. The fork sealing rings are also protected and thus have a longer service life. 044-2100 BMW F800GS/ ADV Neopren Fork Protector with Velcro Strap Neither fork disassembly nor tools are necessary for installation. The Fork Protectors are simply wound around the stanchions and the Velcro strap closed. The ends are then attached by cable ties to the sliding tube. 048-5625

408 Oil filler cap gold for BMW F800GS/ADV/F700/650GS(Twin) *with dip stick* Touratech s quality oil filler cap for the F800GS is milled from aluminium and replaces the plastic oil filler cap. The Touratech oil cap needs a special tool (supplied) to open it. You can also use the tool as a key fob and bottle opener. The tool - which comes with the cap - secures the filler cap against unauthorised access, and means the cap can be opened without fiddling or burning your fingers. Available in gold, red, black and titanium colours. 411-5230 gold 411-5231 red 411-5232 black 411-5233 titanium Locking Oil Filler Cap for F800GS ADV /F700GS/F650GS *With Dip Stick* Stolen oil filler caps are a thing of the past. No special tool required: easy to operate using a small unobtrusive key. - High-quality workmanship - High-quality brand lock - Can be keyed to match our integral pannier locks 048-0244

Oil Filler, Rear Silencer BMW F800 F700 650GS 409 AC Schnitzer Stealth Rear Silencer Carbon, Street Legal, for BMW F800GS(up to 2012) The latest development by AC Schnitzer. A visual highlight for the F800GS the carbon inlet and outlet covers create a sporty look; the new hexagonal design allows for greater ground clearance and more extreme lean angles, and the sporty sound ensures the appropriate appearance. Street legal, of course. Including connecting pipe! Weight: approx. 3,1 kg 048-0950 Shield Rear Silencer BMW F800GS / Adventure As yet, the BMW F800GS have no factory-fitted protection for the rear silencer. We have therefore developed shields for the rear silencers on both versions. The shields make the large rear silencer generally more appealing. They also efficiently protect the most conspicuous part of the exhaust system against the scratches and dents that can be caused by stones or falls. The shield rear silencer is made of lasercut anodised aluminium, which means it is both light and hardwearing. It is very easy to fit, and can in fact even be attached by a layperson.. 048-0298 Manifold Guard, Flexible, F800GS/ADV/F700GS/F650GS(Twin) This heat shield is made from laser-cut stainless steel. Thanks to the special construction, it can easily be adapted to any manifold shape. Not only does it provide heat protection, but it also protects the endangered points of the exhaust system against stone-chipping or in the event of a fall. Supplied with: 2 pce., including 4 collars. 048-0132

410 Carbon Protectors BMW F800GS/ADV /F700GS/F650GS (Twin) Our Carbon protectors will make scratched and damaged side lids a thing of the past. Made of light, sturdy carbon-fibre laminate, they are resistant to almost anything. So adventurous off-road rides will not leave a mark on the side lids - and nor will the soles of your enduro boots. Beautifully shaped protection in elegant material that is easy and straightforward to fit. 048-0340 clutch cover 048-0338 alternator cover Frame Guard BMW F800GS/F650GS (Twin) A very good-looking and extremely practical guard for the frame of your BMW. Everyone knows the problem: your boots scrape against the frame, and gradually damage the surface. Mud and sand can also scratch the frame tubes. Our well-fitting frame guard in tough plastic is the perfect solution to this problem. Couldn t be easier to fit - and it blends well with the vehicle s overall appearance. BMW F800GS ADV/F700GS/F650GS (Twin) 048-0344 for the left side BMW F800GS ADV /F650GS (Twin) 048-0346 for the right side Frame Guard Alu, Right BMW F800GS/ADV /F700GS/F650GS (Twin) Protects the frame and brake cylinders against damage, prevents your off-road boots from getting stuck - and is a treat for the eye! The strong, lasercut aluminium guard takes just moments to fit. 048-0155 Rubber Pad for the Frame Guard BMW F800GS/ADV /F700GS/F650GS (Twin) For all those who not only want the ideal functionality, but also have high standards when it comes to appearances! The rubber pad for the frame guard will also protect your boots - and it simply looks good! Easy to attach by means of the clip mechanism. 048-0366

Frame Protection BMW F800 F700 650GS 411 Frame Guard Alu, Left BMW F800GS/F650GS (Twin) Protects the frame and brake line clamp against damage, prevents your off-road boots from getting stuck - and is a treat for the eye! The strong, lasercut aluminium guard takes just moments to fit. 048-0412 Heel Protector Extension, Left BMW F800GS/F700GS/F650GS (Twin) In heavy use the plastic on the original part can harden and break. The Touratech heel protector extension is - totally heat-resistant - extremely strong - made from 4 mm anodised laser-cut aluminium. 048-5026 Frame Plug Front Main Frame / Alu BMW F800GS/ADV /650 (Twin) GS The elegant cover for the frame cross tube also offers reliable protection against dirt - and simply looks good. Cannot be used in conjunction with the Touratech crash bar. 048-0190 Radiator Guard BMW F800GS/F700GS/F650GS (Twin) This guard improves the appearance of the large radiator. It also provides good protection for the radiator fins. Easy to fit. 048-0140

412 Cover for Swingarm/Main Shaft BMW F800GS/ADV/F700GS/F650GS (Twin) The covers create a more harmonious overalll appearance on the BMW by covering the unsightly hole in the swingarm. Practical benefit: the strong plastic covers protect the chain tightener and rear wheel axle against dirt and foreign bodies. Very easy to fit and remove. 048-0405 cover left 048-0406 cover right BMW Engine Guard Tool Box for BMW F800GS ADV /F700GS/F650GS (Twin) Lockable tool box for the large BMW engine guard. (BMW engine guard No: 7160 7 702 951) Finally, there is a perfect place for your tools which is reliable on long-distance trips. 048-0165 Cover Brake Fluid Reservoir, Rear The brake fluid reservoir on the F800GS/ F650GS (Twin) is almost unprotected. Our lid offers protection against damage and prevents the loss of the lid. BMW F800GS to 2012/F650GS (Twin) 048-0220 alu

Oil Filter Guard BMW F800GS/ADV.(up to 2012)/F650GS (Twin) Situated just behind the front wheel, the oil filter on the F800GS/F650GS (Twin) is almost completely unprotected. The multi-part oil filter guard protects it and the oil cooler against stones and coarse dirt. With no impairment of the function of the oil cooler whatsoever. Made out of anodised aluminium and stainless steel components and fitted to existing attachment points, it is the perfect complement to the long-distance appeal of the F800GS/F650GS (Twin). 048-0126 Tool Box, Crashbars BMW F800 F700 650GS 413 Crash Bar BMW F800GS (up to 2012)/F650GS We have also developed an extremely strong crash bar for the BMWs. The plastic-coated steel tube is integrated perfectly in the design of the motorbike, and will cope even with the toughest conditions. An intended bending point will protect the frame and screw attachments against damage. The slender design also offers lots of advantages when riding off-road. The two-piece roll bar is easy to fit. All attachment materials included. 048-0300 Crash Bar Extension BMW F800GS/F650GS Two additional bars are easily and simply screwed to the roll bar for the engine (048-0300). This measure significantly extends its protective function. Now the fairing and radiator of the F800GS/F650GS (Twin) in particular are well protected. Putting an end to expensive repairs or even breakdowns caused by radiator problems. 048-0302 Engine Guard Extension The engine guard extension on the F800GS/ F650GS (Twin) also protects your machine against stones and coarse dirt. It closes the gap between the rear wheel and engine guard, and thus increases their efficiency considerably. We deliberately dispensed with recesses to prevent the risk of the motorbike becoming stuck on stones or branches. Fitting it to the main stand using three collars with rubber seals is extremely effective at preventing the guard from rattling. 048-0180 F650GS (Twin) 048-0182 F800GS

414 Large engine guard Expedition for BMW F650/700/800GS/Adventure In creating the F800GS, the developers at BMW have produced a motorbike that practically invites you take it on an off-road excursion. Our development team were able to make a number of further improvements to its positive off-road characteristics. This engine guard is an absolute revolution! Touratech have attached great importance to its robustness and functionality. Serious damage, such as holes in the engine block, can be effectively prevented by fitting the large Touratech engine guard. Of course it s also suitable for the BMW F700GS! Maximum strength is provided by multiple folded ridges in the 4 mm thick aluminium base plate, while an additional lower stainless steel attachment plate on the engine ensures the force of an impact is distributed over a large area via 6 bolting points. Ground clearance is not restricted by these two base plates. Another benefit is that the front of the engine guard rises up far enough to prevent damage to the oil filter and oil cooler as well. Plastic rails on the lower part of the base plate ensure that the bolt heads - which are already sunken - are completely covered. As a result, removing the engine guard is no problem even after heavy off-road use. Not least, the plastic rails facilitate sliding the bike over rocks, stones and tree stumps. Almost as an afterthought, they also prevent dirt buid-up. To sum up, the large Touratech engine guard for the BMW F800GS is a product that meets the most demanding requirements as well as being an absolute visual highlight! 048-5140 Replacement bars for motor protection Expedition 040-5135 (Set) NEW P

engine guard, Crashbars BMW F800 F700 650GS 415 048-5161 048-5155 Stainless steel crash bar engine & crash bar extension for BMW F800/700GS, 2013 onwards This crash bar extension from Touratech makes expensive fairing damage a thing of the past. In particular, the extension protects the upper part of the fairing while also preventing damage to the radiator and forks. The Touratech crash bar extension is made from strong stainless steel tubing with an electropolished surface finish. So if the extension is put to the test in a crash or fall, you don t need to worry about scratches turning into unsightly rust patches. Thanks to its robust design, the crash bar extension is also ideal when you need to grab hold of the bike - to pull it out of mud, for example. While striking in appearance, the Touratech crash bar extension fits in well with the overall look of the F800GS. In form and functionality, this extension ideally complements the BMW engine guard. Fitting the two bars onto the Touratech engine guard (048-5155) or the original BMW engine guard is simple and straightforward. 048-5161 (crash bar extension) 048-5155 (crash bar engine)

416 Engine Guard Small BMW F800GS/ADV/F700GS/F650GS (Twin) The small but highly effective engine guard in solid 4-mm thick aluminium protects the engine perfectly against stones and scree. The angled front part and smooth underside greatly ease sliding over rocks and uneven terrain. With this new guard, you can tackle the stoniest tracks in the world. 048-0160 silver 048-5135 black Radiator Guard Alu BMW F800GS (up to 2012) Protects the radiator from stones being thrown up from the ground. - Laser-cut aluminium - Does not affect the radiator function - Screwed on to existing fixing points The radiator cover can cause the engine to overheat under extreme conditions with high outside temperatures and an extreme engine load. 048-0137 Radiator Guard Alu BMW F650GS (Twin) Protects the radiator from stones being thrown up from the ground - Laser-cut aluminium - Does not affect the radiator function - Screwed on to existing fixing points The radiator cover can cause the engine to overheat under extreme conditions with high outside temperatures and an extreme engine load. 048-0135

Engine/Radiator Guard BMW F800 F700 650GS 417 Hard Part Radiator The radiator of the F800GS is only screwed to the frame at one point; all other attachments consist of slot-in rubber bearings. A fall or extreme loads when riding off-road can cause the plastic loop to tear off - which usually spells the end of the ride! This strong Hard Part, made of 3 mm stainless steel, is a replacement for this angle bracket, and provides additional support for the radiator on the filler neck. This means the radiator is securely attached, and is effectively protected against sliding out of the rubber bearings. The original screws can be reused. 048-0465 F 800 GS (-2012) & Adventure 048-5310 F 800 GS (2013 -) 048-0466 F 650/700 GS (Twin) Hard Part for BMW Engine Guard, F800GS/ADV/F700GS The Hard Part for the original BMW engine guard consists of hard wearing rubber mats and an air permeable, heat resistant fleece. The fleece has already proved extremely successful with the Touratech Racing Team. It effectively prevents the spaces between the engine guard and the engine from blocking and stones from collecting and settling there. The fleece can be cut or trimmed as required, and is secured neatly and unobtrusively with cable ties. The rubber mats are glued directly to the guard, thereby preventing stones from settling between the oil reservoir and engine guard. The BMW engine guard Hard Part prevents stuck stones from penetrating the oil reservoir and tearing off the rubber bearings on the engine guard in the event of bottoming out and impacts. 048-0460

418 GS-911 - The emergency Diagnostic Tool for BMW Motorcycles The GS-911 is a unique combination of hardware and software that lets BMW motorbike owners read and also clear the bike s fault memory on the road without a trip to a specialist workshop. This easy-touse device can be read via Bluetooth on a Symbian or Windows mobile phone, or via USB cable or Bluetooth on a PC/laptop/netbook. The software is available for download after registering on the manufacturer s website www.hexcode.co.za The GS-911 provides the following features: Emergency functions (mobile and PC) / Read ECU information (control unit hardware and software version, date of manufacture and other manufacturer information) / Read the fault memory (fault and error codes) and clear the fault memory / Read and store real-time data / Service and maintenance functions (only with the PC software): Test function, e.g. testing the lambda sensor / Set the service interval (motorbike display, e.g. F800GS, shows when the next service is due). The extent of this function depends on the motorcycle. The versatile testing capabilities are constantly being added to. A comprehensive list of the BMW motorcycles that the tester can be used on is available in the Touratech web shop. The only difference between the Enthusiast and Professional versions is that with the Enthusiast, the service- & maintenance functions are limited to a maximum of 10 motorbikes, i.e. 10 different VINs (vehicle identification numbers) can be permanently assigned. The Professional version allows the service & maintenance functions to be used on an unlimited number of motorcycles. Both versions allow the emergency functionality to be used on an unlimited number of bikes. 030-0090 GS-911 Bluetooth Enthusiast Version 030-0095 GS-911 Bluetooth Professional Version 01-044-0875-0 <01-044-0870-0> Unifilter for BMW F800GS/F700GS/F650GS (Twin) High Performance for Clear Airways We found the solution to all dust problems in Australia. Unifilter Australia gave us an air filter to test that fully met our expectations. The Touratech Research & Development team has used the Unifilter in all races since 2006 and since then has found no dust residue in the air filter box. Another advantage of the filter, made of high-tech foam, is the long service life. The filter is not thrown away when its dirty but rinsed out, lubricated again and used time and time again. Thus you don t just take care of your engine but also your wallet. 044-0870 (BMW F800GS/ADV/700/650GS (Twin) 044-0875 (BMW F700GS)

Adjustable Gear Lever BMW F800GS/ADV/F700GS/F650GS (Twin) Unifilter, Gear Lever BMW F800 F700 650GS 419 Enables you to adapt the BMW perfectly to your requirements. Ideal when using adjustable footpegs or if the original lever simply doesn t fit. The gear lever adjusts from 12 cm to 18 cm in 10-mm stages. It also has a folding front part which limits the damage caused by falls and drops. And should the gear lever ever be bent, it is very easy to straighten it again. 048-0222 Folding Gear Lever Folding Brake Lever Even a simple fall can seriously bend or even break the foot lever with no hope of continuing the journey. This problem is very easy to minimise with our foot levers, which fold up at the front. The forces which are transmitted from the lever to the shaft in the event of a fall are also significantly reduced. Slightly bent levers can easily be straightened. BMW F800GS/ADV/F700GS/F650GS(Twin) 048-0120 Folding gear lever BMW F800GS/ADV/F650GS(Twin) 048-0233 Folding brake lever 048-0120 048-0233 Brake Lever Extension BMW F800GS/F650GS (Twin) It is particularly important when riding off-road to have the brake foot safely on the brake. Our brake lever extension will make sure that your boot always finds its way to the lever - and makes operation much easier and noticeably better. Material: high quality stainless steel gear lever ever be bent, it is very easy to straighten it. 048-0230 Folding and adjustable brake lever for BMW F800GS/F700GS/F650GS(Twin) Compared to the original, the Touratech brake lever s length can be adjusted by +5/-5 mm and its height by +4/+10 mm. This makes it much easier to brake while standing. And the cherry on the cake - for harder use, the brake lever also lets you attach a brake saver cable. 048-5395

420 Kick Stand Support Extension for BMW F800GS/F700GS/F650GS (Twin) Made of high quality stainless steel BMW F800GS(up to 2012)/F650GS (Twin) 048-0145 BMW F800GS from 2013 /ADV 048-5275 BMW F700GS 048-5276 Chain Wheel for BMW F800GS/F650GS (Twin) Chain wheel made of steel Years of construction 2008 and 2009: 048-0486 41 teeth 048-0487 42 teeth 048-0488 47 teeth Starting from model 2010: 048-0489 41 teeth 048-0490 42 teeth 048-0491 47 teeth Chain Pinion for BMW F800GS/F700GS/F650GS (Twin) Chain pinion made of steel S - version sport, lighter through drillings 048-0480 15 teeth 048-0481 15 teeth S 048-0482 16 teeth 048-0483 16 teeth S 048-0484 17 teeth 048-0485 17 teeth S Compared to the original 16 teeth front and 42 teeth rear (F650GS: 17/41), combined 15 teeth front plus 47 teeth rear results in approx. 10% reduction in speed and 10% increase in torque. Pinion Gear Guard BMW F800GS/ADV/F700GS/F650GS (Twin) This pinion guard was designed for the most demanding rally in the world. You know the problem if you had to repair a broken engine housing using cold metal. Even long stages on extreme trails where the chain is being worn out almost completely will no longer damage the engine housing. Even if the chain should break and be thrown forward, the integrated guard will make sure that it does not get to the housing. 048-0112 Chain Guard BMW F800GS/ADV/F700GS/F650GS (Twin) Delightful, laser-cut protection made of riveted stainless steel and aluminium parts. This gives the chain guard the necessary stability - and makes it as light as possible. Optimum use is made of the existing mounting points when attaching the chain guard, which means it is easy and quick to do. 048-0110

Long-Distance Footpegs Our long-distance footpegs are made of top quality stainless steel. Thanks to the large free areas, dirt simply falls through them, and the laser-cut edges provide maximum grip and support. The folddown function of the original pegs has been retained. Long-Distance, Relocated Front Footpegs The footpegs are fitting further forward thus providing optimum distance between the touring boots and the brake lever or gear lever. 041-0625 Long 044-5316 low Long-Distance, Relocated Rear Footpegs The long-distance footpegs are fitted further back thus providing optimum space for enduro boots. 041-0626 Chain/Pinion Guard, Footpegs BMW F800 F700 650GS 421 Carbon Shield Pillion Peg BMW F800GS/ADV/F700GS/F650GS (Twin) Not everyone likes the simple steel bar on the back left footpeg. However, as it is extremely important as heel protection, we have developed a shield in high quality carbon. Not only does it look extremely elegant, but it also increases the protective aspect of the bar. To fit, the hard-wearing and very light shield is simply screwed directly to the heel protection. Elegant looks and maximum protection! 048-0360 Studded Pillion Passenger Footpegs F800GS/ADV/ F700GS/F650GS ( Twin) For anyone who rides with a pillion passenger through difficult terrain. With the studded rear footpegs the pillion passenger has a firm grip, too, and does not risk falling off the bike when the going gets difficult. The wider foot base also allows longer distances to be covered comfortably while standing on the footpegs. A special mechanism keeps them folded up when they are not required. Material: high-quality stainless steel. 048-0250 Cover ABS Sensor BMW F800GS/ADV/F700GS/F650GS (Twin) This small but extremely effective cover is available to protect the ABS sensor against damage. Made of high quality stainless steel. 048-0142

422 Mudguard Extension Front The mudguard extension gives the F650GS (Twin) a new and most striking appearance. It adds a genuine long-distance flair. This easy to fit and extremely strong plastic item also offers added protection against dirt and splashes. Unmistakeably good-looking! The paintable mudguard extension is also easy to fit to the F800GS, and makes the beak look longer. 048-0342 Excel Rims with Set of Spokes BMW F800GS Over countless kilometres of testing and travelling, we have found that the weak point of many original wheels is the rims. With our rim sets, you can rectify this defect without having to buy a whole new wheel! Made to the highest specifications, Excel rims have been a guarantee of the ultimate in quality for many years. Numerous world championship titles in off-road sports have been won with Excel rims made by Haan Wheels. Apart from which, the black Made in Japan rims also look extremely good. In our opinion, they are the best looking wheels on the market by far! The Touratech Racing Team relys exclusively on Excels! Scope of delivery: - Excel rim *black* - Stainless steel spokes (36 pieces) (Hub, rear sprocket and brake discs are not included in scope of delivery) For the front wheel 53,34 x 5,46 cm (21 x 2,15 ) / 36 048-0500 For the rear wheel 43,18 x 10,8 cm (17 x 4,25 ) / 36 048-0501 Paint Protection for Tail Sections BMW F800/F700GS/F650GS (Twin) The covers on the tank of the BMW extend well to the front. Boots and legs can soon scratch the paint here. The result: unattractive scratches. But this can now easily be avoided: with our plastic paint protectors. The paint protectors also create an extremely elegant appearance. Just stick them on and off you go! 048-0438

*Works* long-distance foot pegs BMW F800GS/F700GS/F650GS 52 mm wide and 4 mm thick stainless steel claw profile that is kind to your boots Perfect combination of grip and self-cleaning With a more slender design for better ground clearance Significantly less susceptible to impacts Strengthened mounting point With a blasted surface and laser inscription for a superior finish Excel Rims, Mudguard BMW F800 F700 650GS 423 048-5315 (BMW F800GS/F700GS/F650GS) 048-5316 (low -20mm) (F800/F700GS/650GS) Splash Guard BMW F800GS/ADV/F700GS/F650GS (Twin) This splash guard, which is suitable for off-road use, is now also available for the BMW F800/F650 GS (Twin)! It is more effective than the serial part, and the design has already proved itself on numerous journeys. 048-0118 Mudguard Height Increase with Steel Braided Brake Lines for BMW F800GS/ Adventure In tough off-road riding, the gap between the front wheel and mudguard is often not enough for the tyre to clean itself. The result: the front wheel gets caked up, and in an extreme case may even block altogether. And the rider will fall. This height increase gives the tyre as much space as is technically possible - so there s room for the dirt on difficult terrain! The mudguard height increase also makes the whole bike much more functional and look more off-road appropriate. In addition to the height increase, delivery includes longer steel braided brake lines. 048-0200

424 048-5804 048-5803 BLACK EDITION Water protected Tank Bag COMPAÑERO EDITION & BLACK EDITION BMW F800 & ADV / F700GS / 650GS (Twin)*water repellent* The Compañero Edition tank bag matches the colours of the new Touratech Compañero motorcycle suit and is specially tailored to the BMW F 800 GS.Its basic volume of approx. 12 litres quickly and easily expands to approx. 20 litres via an all-round zip. Plus two side pockets provide space for your wallet or papers. A reflective elastic strap on the back is handy for holding your gloves during a short stop, for example. Water-repellent zips are used on the main compartment and both side pockets. The map pocket (26 x 28 cm) securely attaches to the tank bag using Velcro. Inside the top cover there is a document compartment with separate credit card pouch and elastic loops to hold small items like a biro. Two clip-buckles at the front and the Velcro fastener at the back ensure the tank bag can be quickly attached to your bike and is held securely. For off-road use and when fully loaded, the tank bag can also be secured using two side straps. A sturdy handle and two rucksack straps (supplied) round out this fully equipped bag. Colours: black, grey, yellow. Made from Teflon-coated CORDURA which is both water-repellent and dirt-resistant. Made in Germany by KAHEDO. Size (l x w x h): approx. 30 x 33 x 18/26 cm Capacity: approx. 12/20 litres 048-5804 COMPAÑERO EDITION 048-5803 BLACK EDITION

BMW F800 F700 650GS 425 NEW PART PART Tank bag Exp Sport for BMW F800GS/F800GS ADV/F700GS/F650GS (Twin) It fits like a made-to-measure suit! As we develop and offer the exclusive base plates and strong attachment kits for our robust tank bags for each specific vehicle, it is a given that a perfect fit with no play at all should be achieved! The modell Exp Sport is also notable for the expansion option with an all-round zipper; small items can easily be stored under the adjustable elastic strap on the back, and there s a zip-up pocket. Thanks to the water-repellent cable hole, it s now easy to charge a mobile phone in the tank bag -plus the side pockets have an expansion pleat, which means there s even more room inside them than you would think. You ll be extremely impressed by the long list of special features. The material that we use is not plain nylon - it is certified Cordura fabric, made in Germany, as also used for protective motorcycle clothing and expedition equipment Sturdy body and top made from high-quality, water-resistant and abrasion-resistant 1100 dtex Cordura Outer pockets and inserts made from 560 dtex Cordura Waterproof coating on inside of fabric Fluorocarbon impregnation and Teflon coating by DuPont using nanotechnology for protection against moisture, dirt, oil and fading Washable and easy to clean The fabric used has been tested for harmful substances and certified in accordance with OEKO-TEX Standard 100 Reflective 3M Scotchlite panels for maximum visibility Please note: Use paint protection film if necessary! Size: (L x W x H) approx. ca. 30 x 30 x 16/28 cm Volume: approx. 12 / 18 litres Colour: black/white 048-5825

426 NEW PART PART Tank bag Pure for BMW F800GS/ F800GS ADV/F700GS/F650GS (Twin) This minimalist tank bag Pure is a practical, well thought out piece of equipment that represents outstanding value for money. Flatter in shape and with fewer adornments, this model is suitable for all kinds of uses. For instance, it provides enough space for a day trip, can hold documents, a mobile phone, wallet and drinks on the way to a city sightseeing tour, and is also the preferred choice for off-road riding as it doesn t restrict the rider s movements while standing or affect the bike s handling. An ideal accessory providing excellent utility value at a great price. Size: (L x W x H) approx. 30 x 30 x 16 cm ; Volumen approx 12 Liter 048-5802 Handlebar bag Ambato for BMW F800GS/F800GS ADV/F700GS/F650GS (Twin) Practical storage space exactly where you need it! The sturdy handlebar provides enough space to attach an extremely practical and travel-worthy bag. A wide opening water-repellent dustproof zip provides easy access to a large main compartment in which the things you need quickly - a first aid kit, spare pair of gloves, breakdown kit or also your travel documents, wallet, sunglasses and mobile phone - are well protected. A key feature is that our bag doesn t in any way restrict the rider s movements or affect control of the bike! 048-5806 Pillion seat bag Ambato Exp Sport for the BMW F800GS/F800GS ADV/F700GS/ F650GS (Twin) Its numerous, high-quality features leave nothing to be desired and its modern, catchy appearance goes perfectly with our tank bag and rear bag. This lets you put together a personalized and versatile soft-luggage solution, either in whole or in part, to fit your particular space requirements. The pillion bag can be quickly removed and easily carried by its handle. In fact, it looks great even when it s off a bike! Ideal as an add-on bag or alternative to rigid pannier cases or a Topcase! Size: (L x W x H) approx. 33 x 30 x 20/32 cm Volume: approx. 17/22 litres Colour: black 048-5826

BMW F800 F700 650GS Pillion seat bag Ambato Exp for the BMW F800GS/F800GS ADV/F700GS/ F650GS(Twin) The perfect solution for more luggage: Ambato Exp! Anyone who expects more of a pillion bag than others really should take a closer look at the Ambato Exp series! With two outer pockets, a large main compartment, the elastic drawstring on the top, the all-round zipper for when you want to increase its size and the practical carrying handle, this pillion bag can cope with any challenge! In looks, it matches the other luggage solutions in the Ambato series, and is easily attached to the vehicle-specific base by means of two easy-opening zippers. Comes with two carrying handles so it can be used as a backpack or shoulder bag, and with a waterrepellent cable hole on the inside, tasks such as charging electrical devices is not a problem. And that s just a couple of the many options offered by this pillion bag! Size: (L x W x H) approx. 33 x 30 x 20/32 cm Volume: approx. 17/22 litres 427 NEW ART ART 048-5815 Pillion seat bag Ambato Pure for the BMW F800GS/F800GS ADV/F700GS/ F650GS(Twin) If you re looking for a high-quality, sturdy and rugged pillion bag that takes up the least amount of space, doesn t get in the rider s way, is easy to mount and also offers some nice, practical features, then this is the right one for you. You can be sure that we haven t cut any corners on our Ambato Pure pillion bag: Despite its flatter design, this bag still offers an impressive amount of space. It s made of Cordura fabric, so it can take on the toughest demands and most extreme conditions, and its superb workmanship is legendary. An outstanding value for the money that s very hard to resist! Size: (L x W x H) approx. 33 x 30 x 15 cm, Volume: approx. 14 litres Colour: black 048-5817

428 Universal Travel Bag for Pillion Seat A unique solution for all luggage issues! Specially developed to suit almost any motorbike and designed for multi-purpose use. Because it is easy to attach and remove, our Universal Travel Bag is a flexible and ingenious alternative to fixed pannier systems, even for longer trips. You will find more information on the Universal Travel Bag and the accessories on page 1194! 055-1461 Tail Rack Bag BMW F800GS/F700GS/F650GS (Twin) This tail rack bag for the BMW offers approx. 4 litres of carrying capacity. A zip expands the bag to approx. 8 litres of capacity. Two tensioning straps tied shortwise are used to securely fix the bag to the luggage rack. An additional tensioning strap can be put lengthwise. The bag features a closed- cell foam base for non- slip, limpet attachment. Colours: black, grey with sewn in, reinforced reflective strips/cords. Dimensions: approx. 22 x 26 x 12 cm, expands to approx. 22 x 26 x 20 cm. Capacity: approx. 4/8 litres. 055-1297 Tail Rack Bag HZ, BMW F800GS/F700GS/F650GS (Twin) The practical tail rack bag is perfect for storing all kind of bits and pieces, such as tools, spare gloves etc. The bag simply fits over the tail unit and is secured by 2 straps. Only for use without luggage rack. Colour: black Dimensions: approx. 20 x 27 x 8 cm Capacity: approx. 3 litres 055-1236

PART PART Pannier Rack BMW F800GS/F700GS/F650GS (Twin) Strong pannier rack, 18 mm tube diameter. Notable for the carrying handles. They provide support for the pillion passenger - and are useful if you ever have to pull the motorbike out of thevmud! Pannier rack easy to fit to existing attachment points with the special brackets. Ideal for the long-distance look of the F800GS and F650GS (Twin)! Tank Bag, Tail Rack Bag BMW F800 F700 650GS 429 051-2230 black rack 048-5555 stainless steel ZEGA Pro Topcase Rack BMW F800GS/ADV /F700GS/F650GS (Twin) The Special Carrier for our ZEGA Pro Topcases. Made entirely of stainless steel and specifically designed for the BMW s attachment points, the topcase rack is the perfect way to attach ZEGA Pro topcases to your bike. The topcase rack can be used on its own or in conjunction with our pannier system. You will find the available topcases on page 1048 and the following. 048-0183 silver 048-5455 black Luggage Rack Aluminium BMW F800GS/ADV/F700GS/650GS (Twin) Thanks to the many slits and recesses on the luggage rack aluminium, luggage of almost any shape and size can be safely attached to your bike. The wide shape means that even large items can be secured easily and without difficulty. The luggage rack aluminium is light and yet extremely strong. It comes with all of the attachment materials that are required, including the special spacers. NEW 048-5450 (black) 048-0101

430 ZEGA PRO 106 cm *ZEGA Pro* Aluminium Pannier System BMW F800GS/F700GS/F650GS (Twin) The aluminium pannier system again has a very robust construction. We have tried to bring the pannier racks and the panniers as close as possible to the motorcycle. Numerous tests have already been performed in order to ensure that the entire development satisfies the required demands. The rack is made of 18 mm steel tubing and is attached to existing mounting points. Pillion comfort not restricted in any way. Enhances the enduro and touring appearance of the F800GS/650GS(Twin). For more technical details for the ZEGA Pro panniers please have a look at page 1036 and the following. Pannier System with: stainless steel rock black rock ZEGA Pro 31/38 L 048-5730 052-3101 ZEGA Pro AND-S 31/38 L 048-5731 052-3102 ZEGA Pro AND-Black 31/38 L 048-5732 052-3103

PART PART ZEGA BMW PRO2 F800 F700 650GS NEW 431 After Zega and Zega Pro, we have now developed the Zega Pro2. Based on the Zega Pro, its excellent properties have all been retained, but many details have also been significantly improved. The Zega Pro2 shines with its improved profile for even better operation, a carrying handle as standard and optimised ventilation.above all, though, the pre-assembled version is an absolute revolution! It is factory-fitted with an entirely new attachment system that combines suitability with maximum ease of use, facilitating single-handed use - you could say it s Plug and play for fully packed aluminium panniers! There s a single lever on the outside to operate the mechanism. The lid can stay closed when it is removed from the bike. Pannier on, click - and go! Pannier System with: stainless steel rock black rock ZEGA Pro2-31/38 L 048-6030 048-6080 ZEGA Pro2 AND-S 31/38 L 048-6031 048-6081 ZEGA Pro2 AND-Black 31/38 L 048-6032 048-6082 Complete information about the innovative aluminium case on page 1036 or www.touratech.com/zegapro2_en ZEGA PRO2