Contents. Connectors - Crimp Terminals. Page

Farnell Page 249 Date: 17-08-0 time:21:21 Contents Page Bootlace Ferrules 250 Insulated Crimp Terminals - Imperial 21 Insulated Crimp Terminals - Metric 253 Non Insulated Crimp Terminals 22 Non Insulated Crimp Terminals - High Temperature 27 PCB Spade Terminals 28 Splice Terminals 28 Make Farnell-Newark InOne your first choice - search over 300,000 products at www.farnell-newarkinone.com.sg

Farnell Page 250 Date: 17-08-0 time:21:22 250 Bootlace Ferrules "Plasti Grip" Terminal Kits "Tel-Splice" 272951 SEE THIS PAGE SEE PAGE 25 SEE WEBSITE SEE WEBSITE Non Insulated Ferrules "Ultra-Fast" Hydraulic Tool PCB Terminals See Website SEE PAGE 257 SEE PAGE 27 SEE WEBSITE Ferrule Kits PIDG Non Insulated HT Multicomp Crimp Terminal SEE WEBSITE SEE PAGE 258 SEE PAGE 27 SEE PAGE 253 Insulated Metric Crimp Kits Butt Splices SEE PAGE 253 SEE PAGE 20 SEE PAGE 29 Duraseal Insulated Imperial Scotchlok SEE PAGE 255 SEE PAGE 22 SEE WEBSITE Miniature Conductor Non Insulated Tap, Blade, Fuse Slices SEE PAGE 255 SEE PAGE 22 SEE PAGE 270 Insulated Colour Coded Bootlace Ferrules A range of cable ferrules designed to provide a neat end termination to multi-stranded wires. They provide a secure connection to terminal blocks and captive terminals and stop wire strands short circuiting to adjacent connectors. Crimping is achieved by the action of the screw in the connector, or by use of a dedicated crimping tool. The ferrules consist of a tinned copper hollow tube and are also available with a plastic colour coded insulating shroud. Available in either French or German colour codes. Conform to DIN4228 Part 1 and 4. Terminal Copper, 0.3µ Tin plated Shroud Nylon Maximum temperature 105 C FOR SUITABLE CRIMP TOOLS SEE PAGE 252 250 1,000s more products available at www.farnell-newarkinone.com.sg Prices are in Singapore Dollars and exclusive of GST. Due to the volatile nature of certain products, prices are subject to change without notice.

Farnell Page 251 Date: 17-08-0 time:21:23 251 A B C D Wire Size Colour ±0.2 ±0.3 ±0.03 List No. Order Code French Colour Code 0.25mm² Violet 12.4 8.0 1.1 0.8 E0208-VIOLET. 389-8891 0.25mm² Violet 12.4 8.0 1.1 0.8 E0208-VIOLET 997-209 0.34mm² Pink 12.4 8.0 1.1 0.8 E0308-PINK. 389-8908 0.34mm² Pink 12.4 8.0 1.1 0.8 E0308-PINK 997-217 0.5mm² White 14.0 8.2 1.0 2. DICE0505. 257-91 0.5mm² White 14.0 8.2 1.0 2. DICE0505 997-2218 0.75mm² Blue 14. 8.2 1.2 3.2 DICE7575. 257-928 0.75mm² Blue 18.3 12.0 1.5 1.2 E7512-BLUE-L. 389-8910 0.75mm² Blue 18.3 12.0 1.5 1.2 E7512-BLUE-L 997-225 1.0mm² Red 14. 8.2 1.4 3.4 DICE1010. 257-930 1.0mm² Red 14. 8.2 1.4 3.4 DICE1010 997-222 1.0mm² Red 18.3 12.0 2.0 1.7 E1012-RED-L. 389-8921 1.0mm² Red 18.3 12.0 2.0 1.7 E1012-RED-L 997-233 1.5mm² Black 14. 8.2 1.7 3.5 DICE1515. 257-941 1.5mm² Black 14. 8.2 1.7 3.5 DICE1515 997-2234 1.50mm² Black 24.3 18.0 2.0 1.7 E1518-BLACK-L. 389-8933 1.50mm² Black 24.3 18.0 2.0 1.7 E1518-BLACK-L 997-241 2.5mm² Grey 15.2 8.2 2.2 4.0 DICE2525. 257-953 2.5mm² Grey 15.2 8.2 2.2 4.0 DICE2525 997-2242 2.50mm² Grey 25.4 18.0 2. 2.3 E2518-GREY. 389-8945 2.50mm² Grey 25.4 18.0 2. 2.3 E2518-GREY 997-250 4.0mm² Orange 1.5 9.0 2.8 4.5 DICE4040. 257-95 4.0mm² Orange 1.5 9.0 2.8 4.5 DICE4040 997-2250 4.0mm² Orange 25.4 18.0 3.2 2.8 E4018-ORANGE. 389-8957 4.0mm² Orange 25.4 18.0 3.2 2.8 E4018-ORANGE 997-28.0mm² Green 20.0 12.0 3.5.3 DICE040. 257-977.0mm² Green 20.0 12.0 3.5.3 DICE040 997-229.0mm² Green 2.5 18.0 3.9 3.5 E018-GREEN. 389-899.0mm² Green 2.5 18.0 3.9 3.5 E018-GREEN 997-27 10.0mm² Brown 21.5 12.0 4.5 7. DICE0010. 472-21 10.0mm² Brown 21.5 12.0 4.5 7. DICE0010 997-2439 1.0mm² Ivory 22.2 12.0 5.8 8.8 DICE001. 472-33 1.0mm² Ivory 22.2 12.0 5.8 8.8 DICE001 997-2447 25.0mm² Black 28.0 1.0 7.9 7.5 E25-1-BLACK. 389-8970 25.0mm² Black 28.0 1.0 7.9 7.5 E25-1-BLACK 997-284 35.0mm² Red 39.0 25.0 8.7 8.3 E35-25-RED. 389-8982 35.0mm² Red 39.0 25.0 8.7 8.3 E35-25-RED 997-292 50.0mm² Blue 41.0 25.0 10.9 10.3 E50-25-BLUE 389-8994 German Colour Code 0.25mm² Light Blue 10.4.0 0.8 2.0 PET1125. 257-898 0.25mm² Light Blue 10.4.0 0.8 2.0 PET1125 997-219 0.34mm² Turquoise 10.4.0 0.8 2.0 PET1134. 257-904 0.34mm² Turquoise 10.4.0 0.8 2.0 PET1134 997-2200 0.5mm² Orange 14.0 8.2 1.0 2. PET0505. 257-989 0.5mm² Orange 14.0 8.2 1.0 2. PET0505 997-2277 0.75mm² White 14. 8.2 1.2 3.2 PET7575. 257-990 0.75mm² White 14. 8.2 1.2 3.2 PET7575 997-2285 0.75mm² White 18.3 12.0 1.5 1.2 E7512-WHITE-L. 389-9007 0.75mm² White 18.3 12.0 1.5 1.2 E7512-WHITE-L 997-270 1.0mm² Yellow 14. 8.2 1.4 3.4 PET1010. 258-003 1.0mm² Yellow 14. 8.2 1.4 3.4 PET1010 997-2293 1.0mm² Yellow 18.3 12.0 1.7 1.4 E1012-YELLOW-L. 389-9019 1.0mm² Yellow 18.3 12.0 1.7 1.4 E1012-YELLOW-L 997-2714 1.5mm² Red 14. 8.2 1.7 3.5 PET1515. 258-015 1.5mm² Red 14. 8.2 1.7 3.5 PET1515 997-2307 1.50mm² Red 24.3 18.0 2.0 1.7 E1518-RED-L. 389-9020 1.50mm² Red 24.3 18.0 2.0 1.7 E1518-RED-L 997-2722 2.5mm² Blue 15.2 8.2 2.2 4.0 PET2525. 258-027 2.5mm² Blue 15.2 8.2 2.2 4.0 PET2525 997-2315 2.50mm² Blue 25.4 18.0 2. 2.3 E2518-BLUE. 389-9032 2.50mm² Blue 25.4 18.0 2. 2.3 E2518-BLUE 997-2730 4.00mm² Grey 19.4 12.0 3.2 2.8 E4012-GREY. 389-9044 4.00mm² Grey 19.4 12.0 3.2 2.8 E4012-GREY 997-2749 4.00mm² Grey 25.4 18.0 3.2 2.8 E4018-GREY. 389-905 4.00mm² Grey 25.4 18.0 3.2 2.8 E4018-GREY 997-2757.00mm² Black 20.5 12.0 3.9 3.5 E012-BLACK. 389-908.00mm² Black 20.5 12.0 3.9 3.5 E012-BLACK 997-275.0mm² Black 2.5 18.0 3.9 3.5 E018-BLACK. 389-9070.0mm² Black 2.5 18.0 3.9 3.5 E018-BLACK 997-2773 10.0mm² Ivory 20.8 12.0 4.9 4.5 E10-12-IVORY. 389-9081 10.0mm² Ivory 20.8 12.0 4.9 4.5 E10-12-IVORY 997-2781 1.0mm² Green 2.8 12.0.2 5.8 E1-12-GREEN. 389-9093 1.0mm² Green 2.8 12.0.2 5.8 E1-12-GREEN 997-2790 25.0mm² Brown 28.0 1.0 7.9 7.5 E25-1-BROWN. 389-9100 25.0mm² Brown 28.0 1.0 7.9 7.5 E25-1-BROWN 997-2803 100 Per Pack Order Code 1+ 10+ 25+ 50+ + French Colour Code 0.25mm² 389-8891 13.78 11.84 10.08 7.10 0.25mm² 997-209 13.4 11.72 9.98 7.03 0.34mm² 389-8908 13.91 12.29 10.7 7.1 0.34mm² 997-217 13.77 12.17 10.5 7.09 0.5mm² 257-91 15.02 12.55 11.2 4.53 0.5mm² 997-2218 15.02 12.55 11.2 4.53 0.75mm² 257-928 1.20 14.23 13.29 4.70 0.75mm² 389-8910 17.17 15.8 12.81 8.9 0.75mm² 997-225 17.00 15.70 12.8 8.0 1.0mm² 257-930 17.19 14.92 13.23 5.15 1.0mm² 997-222 17.02 14.77 13.10 5.10 1.0mm² 389-8921 17.47 15.8 12.71 8.7 1.0mm² 997-233 17.30 15.70 12.58 8.7 1.5mm² 257-941 17.02 14.73 13.45 4.98 1.5mm² 997-2234 17.02 14.73 13.45 4.98 1.50mm² 389-8933 28.73 2.4 21.54 14.28 1.50mm² 997-241 28.73 2.4 21.54 14.28 2.5mm² 257-953 22.25 18.97 1.80.5 2.5mm² 997-2242 22.03 18.78 1.3.58 2.50mm² 389-8945 29.99 27.52 22.43 14.52 21987 100 Per Pack Order Code 1+ 10+ 25+ 50+ + French Colour Code 2.50mm² 997-250 29.9 27.25 22.21 14.38 4.0mm² 257-95 32.37 30.15 27.72 7.1 4.0mm² 997-2250 32.05 29.85 27.45 7.09 4.0mm² 389-8957 33.32 30.78 25.52 17.17 4.0mm² 997-28 33.32 30.78 25.52 17.17.0mm² 257-977 32.05 27.77 18.14 9.79.0mm² 997-229 32.05 27.77 18.14 9.79.0mm² 389-899 27.8 25.84 23.31 1.31.0mm² 997-27 35.15 32.90 2.35 17.17 10.0mm² 472-21 41.41 3.92 31.4 21.03 10.0mm² 997-2439 41.41 3.92 31.4 21.03 1.0mm² 472-33 49.72 42.40 35.37 21.51 1.0mm² 997-2447 49.72 42.40 35.37 21.51 50 Per Pack 25.0mm² 389-8970 40.29 37.20 31.10 20.51 25.0mm² 997-284 40.29 37.20 31.10 20.51 25 Per Pack 35.0mm² 389-8982 39.8 37.43 33.07 2.24 35.0mm² 997-292 47.99 4.38 37.40 2.35 50.0mm² 389-8994.11 2.04 5.12 44.92 German Colour Code 100 Per Pack 0.25mm² 257-898 13.5 11.72 9.95.1 0.25mm² 997-219 13.5 11.72 9.95.1 0.34mm² 257-904 13.79 11.9 10.15.84 0.34mm² 997-2200 13.5 11.84 10.05.77 0.5mm² 257-989 14.3 11.88 11.24 4.33 0.5mm² 997-2277 14.3 11.88 11.24 4.33 0.75mm² 257-990 1.04 14.1 13.1 4.4 0.75mm² 997-2285 1.04 14.1 13.1 4.4 0.75mm² 389-9007 17.15 15.70 12.54 8.52 0.75mm² 997-270 1.98 15.54 12.42 8.44 1.0mm² 258-003 17.02 14.73 13.19 4.98 1.0mm² 997-2293 17.02 14.73 13.19 4.98 1.0mm² 389-9019 1.98 15. 12.74 8.92 1.0mm² 997-2714 1.98 15. 12.74 8.92 1.5mm² 258-015 17.19 14.82 13.45 5.03 1.5mm² 997-2307 17.02 14.7 13.32 4.98 1.50mm² 389-9020 28.54 2.29 21.35 14.70 1.50mm² 997-2722 28.54 2.29 21.35 14.70 2.5mm² 258-027 22.53 19.13 18.48.81 2.5mm² 997-2315 22.31 18.94 18.30.74 2.50mm² 389-9032 29.82 27.77 22.21 14.70 2.50mm² 997-2730 29.82 27.77 22.21 14.70 4.00mm² 389-9044 32.71 29.05 23.25 1.37 4.00mm² 997-2749 32.39 28.7 23.02 1.21 4.00mm² 389-905 33.38 31.07 24.88 1.9 4.00mm² 997-2757 33.38 31.07 24.88 1.9.00mm² 389-908 32.39 28.7 23.02 1.21.00mm² 997-275 32.39 28.7 23.02 1.21.0mm² 389-9070 29.07 27.02 24.25 20.38.0mm² 997-2773 37.20 34.38 27.51 18.52 10.0mm² 389-9081 40.41 35.0 28.50 20.1 10.0mm² 997-2781 40.41 35.0 28.50 20.1 1.0mm² 389-9093 27.70 25.55 21.2 17.4 1.0mm² 997-2790 33.71 31.10 24.88 1.85 25.0mm² 389-9100 33.17 30.9 25.75 21.78 25.0mm² 997-2803 40.41 37.9 30.14 20.1 Insulated - French Colour Code C D Wire Size AWG Colour A B ±0.05 ±0.1 List No. Order Code DZ5CE005 0.5mm² 22/20 White 13 8 1.08 2. DZ5CE005 120-99 DZ5CE007 0.75mm² 20/18 Blue 13.5 8 1.28 2.7 DZ5CE007 120-999 DZ5CE010 1mm² 18 Red 13.5 8 1.48 3 DZ5CE010 120-7000 DZ5CE015 1.5mm² 1 Black 13.5 8 1.78 3. DZ5CE015 120-7001 DZ5CE025 2.5mm² 14 Grey 14.5 8 2.28 4.2 DZ5CE025 120-7002 DZ5CA042 4mm² 12/10 Orange 17.3 11.5 2.82 4.8 DZ5CA042 120-7004 219843 100 Per Pack Wire Size Order Code 1+ 10+ 25+ 50+ 0.5mm² 120-99 1.18 13.57 12.11 9.37 0.75mm² 120-999 17.12 15.2 14.00 10.97 1mm² 120-7000 18.23 1.08 14.39 10.97 1.5mm² 120-7001 18.23 1.08 14.39 11.29 2.5mm² 120-7002 23.47 20.8 18.8 14.75 4mm² 120-7004 53.90 48.53 44.07 34.47 Compliant Non-compliant Limited stock - RoHS replacement available RoHS Sales Tel: (5) 788 0200 300,000 products, stocked and ready to despatch 251

Farnell Page 252 Date: 17-08-0 time:21:25 252 Twin Entry Ferrules Ì Ferrules for the termination of 2 or more wires Ì Colour coded to DIN Standard. Ì Supplied in packs of 100 Size Size (100) mm 2 AWG Colour List No. Order Code 1+ 5+ 10+ 2x0.5 2x20 White 9037380000. 390-413 7.98.42 5.31 2x0.5 2x20 White 9037380000 112-1750 8.59 7.0 5.83 2x0.75 2x18 Grey 9037410000. 390-425 8.43.75 5.5 2x0.75 2x18 Grey 9037410000 112-1751 9.05 7.39.18 2x1.0 2x17 Red 9037440000. 390-437 8.51.81 5.8 2x1.0 2x17 Red 9037440000 112-1752 9.21 7.52.28 2x1.5 2x1 Black 9037470000. 390-449 8.51.81 5.8 2x1.5 2x1 Black 9037470000 112-1754 9.21 7.52.28 2x2.5 2x14 Blue 9037500000. 390-450 8.0.87 5.84 2x2.5 2x14 Blue 9037500000 112-1755 9.31 7.58.48 2x4.0 2x12 Grey 9037530000. 390-42 24.44 19.55 1.27 2x4.0 2x12 Grey 9037530000 112-175 2.24 21.42 17.80 2x.0 2x10 Yellow 9037550000. 390-474 32.71 2.1 21.82 2x.0 2x10 Yellow 9037550000 112-1757 35.09 28.4 23.8 2x10.0 2x7 Red 9037570000. 390-48 31.93 2.04 21.90 2x10.0 2x7 Red 9037570000 112-1758 42.45 34.3 28.84 Crimp Tool and Insulated Ferrules Stripax Plus Note: Tool is only suitable for ferrules listed below Order List No. Code 1+ 5+ Crimp Tool 902000 972-289 302.3 29.73 500 Per Pack Wire Size 1+ 5+ 10+ French Colour Code 0.5mm² White 900428. 972-290 50.18 42.12 3.93 0.5mm² White 900428 112-1738 53.48 45.8 40.23 0.75mm² Blue 900431. 972-307 59.07 49.44 45.3 0.75mm² Blue 900431 112-1740 3.34 54.13 49.4 1mm² Red 900433. 972-319 0.52 51.48 4.84 1mm² Red 900433 112-1743 5.30 5.25 51.17 1.5mm² Black 900435. 972-320 2.71 52.8 47.9 1.5mm² Black 900435 112-1745.89 57.45 52.01 2.5mm² Grey 900437. 972-332 73.24 0.79 54.95 2.5mm² Grey 900437 112-1747 77.92.27 59.89 German Colour Code 0.5mm² Orange 900427. 972-344 54.19 45.17 39.87 0.5mm² Orange 900427 112-1737 54.52 50.8 44.50 0.75mm² White 900429. 972-35 3.79 53.17 4.98 0.75mm² White 900429 112-1739 4.19 59.0 53.15 1mm² Yellow 900432. 972-38.3 55.54 49.03 1mm² Yellow 900432 112-1742 7.05 2.14 55.37 1.5mm² Red 900434. 972-370 7.74 5.45 49.8 1.5mm² Red 900434 112-1744 8.09 3.02 5.25 2.5mm² Blue 90043. 972-381 73.24 1.01 54.92 2.5mm² Blue 90043 112-174 79.49 8.13 1.88 Crimp Tooling for Bootlace Ferrules Insulated and Non-Insulated MEB 050 23298 Ì Cable cutting, stripping and crimping tool Ì Versatile tool for efficient cable preparation Ì Crimps bootlace ferrules from 0.5 to 2.5mm 2 Ì Easy ferrule handling inside tool, in strip form Ì Automatic feed action Ì 10 strips of 50 ferrules, for use with Stripax Plus Ì German and French colour ferrules 209954 MEB 050 single handed crimp tool with 5 crimp nests for crimps on 0.5-.0mm 2 / 22-10 AWG wires Non-Insulated KEB 4010 KEB 1025 KEB 3550 PZD 3 A range of ergonomically designed full cycle action crimp tools. Ì M series designed for single handed use and the K series for either single or double handed use Type Order Code 1+ 5+ 10+ MEB 050 399-301 257.25 235.02 20.7 KEB 4010 399-3073 257.25 235.02 20.7 KEB 1025 399-3085 257.25 235.02 20.7 KEB 3550 399-3097 257.25 235.02 20.7 PZD 3 399-3050 212.10 19.83 177.09 Crimp Tool for Bootlace Ferrules L=12 KEB 4010 double handed crimp tool with 3 crimp nests for crimps on 4-10mm 2 / 12-8 AWG wires KEB 1025 double handed crimp tool with 3 cimp nests for crimps on 10-25mm 2 / -4 AWG wires KEB 3550 double handed crimp tool with 2 crimp nests for crimps on 35-50mm 2 / 2-0/1 AWG wires PZD 3 single handed tool with self adjusting dies for square crimps on 0.5-.0mm 2 / 22-10 AWG wires Ì Soft rounded handles designed for optimal load distribution Ì Toggle action for mechanical advantage Conform to DIN4228 Part 1. Internal Dia. Length Wire Size AWG ±0.1 ±0.4 List No. Order Code 0.5mm² 22/20 1 DUCE0505. 224-844 0.5mm² 22/20 1 DUCE0505 997-2072 0.75mm² 20/18 1.2 10 DUCE7575. 224-85 0.75mm² 20/18 1.2 10 DUCE7575 997-2080 1mm² 18 1.4 10 DUCE1010 224-88 1.5mm² 10 1.7 10 DUCE1515. 224-870 1.5mm² 10 1.7 10 DUCE1515 997-2099 2.5mm² 14 2.2 12 DUCE2525. 224-881 2.5mm² 14 2.2 12 DUCE2525 997-2102 4mm² 12/10 2.8 12 DUCE4040. 224-893 4mm² 12/10 2.8 12 DUCE4040 997-2110 mm² 10 3. 15 DUCE040. 224-900 mm² 10 3. 15 DUCE040 997-2129 DAVICO 100 Per Pack Wire Size Order Code 1+ 10+ 25+ 50+ 0.5mm² 224-844 5.1 4.72 3.92 3.24 0.5mm² 997-2072 5.1 4.72 3.92 3.24 0.75mm² 224-85 5.7 4.77 3.9 3.27 0.75mm² 997-2080 5.1 4.72 3.92 3.24 1mm² 224-88.4 5.55 4.2 3.82 1.5mm² 224-870 7.58.32 5.23 4.33 1.5mm² 997-2099 7.58.32 5.23 4.33 2.5mm² 224-881 10.35 8.70 7.19 5.97 2.5mm² 997-2102 10.35 8.70 7.19 5.97 4mm² 224-893 8.85 7.45.41 5.34 4mm² 997-2110 10.79 9.05 7.51.20 mm² 224-900 14.09 11.84 9.82 8.15 mm² 997-2129 14.09 11.84 9.82 8.15 239307 219844 A pocket sized crimp tool for 0.25, 0.34, 0.5, 0.75, 1.0, 1.5 and 2,5mm 2 ferrules. A wedge at the tip of the tool is suitable for crimping larger ferrule sizes. The jaws create a ridged pattern for better cable retention. 252 1,000s more products available at www.farnell-newarkinone.com.sg Prices are in Singapore Dollars and exclusive of GST. Due to the volatile nature of certain products, prices are subject to change without notice.

Farnell Page 253 Date: 17-08-0 time:21:2 253 Order Code 1+ 5+ 10+ 0.25-2.5mm 2 299-870 54.99 50.7 45.48 209853 Ring Crimp Tool for Bootlace Ferrules L=225 A lightweight crimp tool for 0.5mm 2 to 1mm 2 cable ends. Made of a durable alloy with a comfortable plastic hand grip. List No. AT1PA2 Order Code 1+ 5+ 10+ 0.5-1mm 2 177-975 50.80 47.79 42.9 Ratchet Crimp Tool for Bootlace Ferrules Crimp Selection Chart L=230 Insulated Crimp Terminals - Metric Ì Easy cable entry guide which eliminates flared wire strands Ì Bright electrotinned finish which prevents oxidisation Ì UL recognised and CSA approved Ì A digit is indented above the crimp to verify correct usage. Current ratings Quoted at 415V ac max. Insulation Coloured Vinyl and 32 C Terminal Copper to BS017 (1981) Temperature range -20 C to +85 C Plating Electro-tinned to BS1872 (1984) DAVICO A full cycling ratchet crimp tool with manual release. The jaws create a ridged pattern for better cable retention. Covering a wide range of cable sizes from 0.5mm 2 up to 10mm 2 in either insulated or non-insulated cable ends. Spare handle return springs are available separately. List No. DCER 510 Order Code 1+ 5+ 10+ Crimp Tool 0.5-10mm 2 209-181 15.7 140.25 121.38 Order Code 1+ 5+ 10+ Spare Spring (pack of 2) 43-152.93.03 5.22 Wire Details Insulation Colour Red Blue Yellow Wire Size in mm 2 0.25-1.5 1.04-2.3 2.3 -.4 Single Stranded Wire 0.57-1.44 1.14-1.82 1.82-2.89 Size Dia. in mm Equivalent A.W.G. 22-1 1-14 12-10 Equivalent S.W.G. 29-17 17-13 11 - Suitable Metric Cables Stranded 19/0.15 13/0.2 1/0.2 19/0.2 14/0.25 24/0.2 19/0.25 32/0.2 40/0.2 19/0.3 Single 1/0.9 1/1.13 19/0.3 7/0.5 21/0.3 30/0.25 19/0.335 3/0.2 28/0.3 35/0.3 51/0.25 1/1.38 1/1.78 AWG=American Wire Gauge SWG=Standard Wire Gauge Conductor Make Up Metric cables i.e. 19/0.15=19 Strands of 0.15mm diameter. 19/0.45 44/0.3 7/0.85 5/0.3 5/0.3 37/0.4 159/0.2 84/0.3 7/1.04 1/2.25 209854 209855 20985 100 Per Pack Stud Size Equiv. Ring mm BA Width Order Code 1+ 5+ 10+ 50+ + Red - 19 Amp 3.2 5.7 150-28 11.03 8.21 5.21 3.18 3.2 5.7 997-1548 11.03 8.21 5.21 3.18 3.7 4 5.7 150-29 11.70 8.82 5.21 3.18 3.7 4 5.7 997-155 11.70 8.82 5.21 3.18 4 3. 150-270 9.9 8.1 5.1 3.17 4 3. 997-154 9.9 8.1 5.1 3.21 5 2 8.0 150-271 9.9 8.04 5.1 3.20 5 2 8.0 997-1572 9.9 8.04 5.1 3.20 0 11. 150-272 13.97 11.27 7.15 4.3 0 11. 997-1580 13.97 11.27 7.15 4.3 Blue - 27 Amp 3.2. 150-273 10.29 8.37.79 3.2. 997-1599 10.29 8.37.79 3.7 4. 150-274 10.29 8.37 5.7 4.12 3.7 4. 997-102 10.29 8.37 5.7 4.12 4 3. 150-275 11.37 9.24 5.82 3.85 4 3. 997-110 11.37 9.24 5.82 3.85 5 2 8.5 150-27 12.84 9.9.42 3.71 5 2 8.5 997-129 12.84 9.9.42 3.71 0 12.0 150-277 1.54 13.27 8.45 5.01 0 12.0 997-137 1.54 13.27 8.45 5.01 Yellow - 48 Amp 3.7 4 7.2 150-278 19.94 18.00 14.52 5.4 3.7 4 7.2 997-145 19.94 18.00 14.52 5.4 4 3 7.2 150-279 20.5 18.30 14.82 5.4 4 3 7.2 997-153 20.5 18.30 14.82 5.4 5 2 9.5 150-280 21.42 19.79 12.97 5.54 5 2 9.5 997-11 21.42 19.79 12.97 5.54 0 12.0 150-281 24. 23.03 19.79 7.52 0 12.0 997-170 24. 23.03 19.79 7.52 8 15.0 150-282 2.94 24.00 14.85 8.7 8 15.0 997-188 2.94 24.00 14.85 8.7 Fork 100 Per Pack Stud Size Equiv. Fork mm BA Width Order Code 1+ 5+ 10+ 50+ + Red 18 Amp 3.2 5.7 150-283 9.95 8.04 5.4 3.21 3.2 5.7 997-19 9.95 8.04 5.4 3.21 3.7 4 5.7 150-284 9.95 8.04 5.4 3.21 3.7 4 5.7 997-1700 9.95 8.04 5.4 3.21 4 3.4 150-285 10.05 8.12 5.51 3.24 4 3.4 997-1718 10.05 8.12 5.51 3.24 5 2 9.5 150-28 11.58 9.00 5.7 3.24 5 2 9.5 997-172 11.58 9.00 5.7 3.30 0 12.0 150-287 15.72 11.7 8.04 5.10 0 12.0 997-1734 15.72 11.7 8.04 5.10 Blue-24 Amp 3.2 5.7 150-288 11.89 9.3.12 3.8 3.2 5.7 997-1742 11.89 9.3.12 3.8 3.7 4 5.7 150-289 12.54 9.3 5.7 3.9 3.7 4 5.7 997-1750 12.54 9.3 5.7 3.9 4 3.4 150-290 12.7 9.73 5.82 3.73 4 3.4 997-179 12.7 9.73 5.82 3.73 5 2 9.5 150-291 12.7 9.73 5.82 4.02 5 2 9.5 997-1777 12.7 9.73 5.82 4.02 0 12.0 150-292 18.00 12.54 8.37 5.89 0 12.0 997-1785 18.00 12.54 8.37 5.95 Yellow-3 Amp 4 3 8.3 150-294 21.75 20.15 12.33 5.82 4 3 8.3 997-1793 21.75 20.15 12.33 5.82 5 2 9.0 150-295 22.81 20.55 12.54.01 5 2 9.0 997-1807 22.81 20.55 12.54.01 0 9.0 257-047 24.40 22.5 14.79 8.04 0 9.0 997-211 24.40 22.5 14.79 8.04 0 12.0 150-29 24.40 22.5 14.79 8.52 0 12.0 997-1815 24.40 22.5 14.79 8.52 209857 209858 Compliant Non-compliant Limited stock - RoHS replacement available RoHS Sales Tel: (5) 788 0200 300,000 products, stocked and ready to despatch 253

Farnell Page 254 Date: 17-08-0 time:21:27 254 Female Push-On Push-On Blade 100 Per Pack Order Tab Size Code 1+ 5+ 10+ 50+ + Red-10 Amp 2.8 x 0.5 150-298 18.49 17.21 12.00 4.15 2.8 x 0.5 997-1823 18.49 17.21 12.00 4.15 2.8 x 0.8 150-299 18.18 1.88 11.70 4.15 2.8 x 0.8 997-1831 18.18 1.88 11.70 4.15 4.8 x 0.5 472-542 18.49 1.24 10.39 4.28 4.8 x 0.5 997-2358 18.49 1.24 10.39 4.28 4.8 x 0.8 472-554 14.13 12.84 8.7 4.17 4.8 x 0.8 997-23 14.13 12.84 8.7 4.17.3 x 0.8 150-300 18.30 1.71 10.29 4.55.3 x 0.8 997-1840 18.30 1.71 10.29 4.5 Blue-15 Amp 4.8 x 0.5 472-5 18.82 15.57 10.39 4.88 4.8 x 0.5 997-2374 18.82 15.57 10.39 4.88 4.8 x 0.8 472-578 14.13 11.58 7.08 4.83 4.8 x 0.8 997-2382 14.13 11.58 7.08 4.83.3 x 0.8 150-301 20.77 18.48 12.00 5.51.3 x 0.8 997-1858 20.77 18.48 12.00 5.51 Yellow-24 Amp.3 x 0.8 150-302 23.89 21.7 13.97 7.79.3 x 0.8 997-18 23.89 21.7 13.97 7.79 Piggy Back 209859 100 Per Pack Tab Size Order Code 1+ 5+ 10+ 50+ + Red - 10 Amp.3 x 0.8 150-309 15.92 14.3 10.39 8.45.3 x 0.8 997-1920 15.92 14.3 10.39 8.45 Blue - 15 Amp.3 x 0.8 150-310 18.00 15.09 11.25 4.24.3 x 0.8 997-1939 18.00 15.09 11.25 4.24 Yellow - 24 Amp.3 x 0.8 150-311 24.12 21.84 12.54.71.3 x 0.8 997-1947 24.12 21.84 12.54.71 Pin 100 Per Pack Pin Size Order Code 1+ 5+ 10+ 50+ + Red - 19 Amp 1.9 x 12 257-011 15.91 13.4 9.73 4.03 1.9 x 12 997-2137 15.91 13.4 9.73 4.03 Blue - 27 Amp 1.9 x 12 257-023 18.18 14.94 9.73 4.54 1.9 x 12 997-2145 18.18 14.94 9.73 4.54 Yellow -48 Amp 2.8 x 14.0 257-035 30.18 25.30 1.24 8.04 2.8 x 14.0 997-2153 30.18 25.30 1.24 8.04 20982 20983 100 Per Pack Tab Size Order Code 1+ 5+ 10+ 50+ + Red - 10 A.3 x 0.8 150-324 22.39 17.88 9.73.08 Red - 10 A.3 x 0.8 997-1955 22.39 17.88 9.73.08 Blue - 15A.3 x 0.8 150-325 23.4 19.95 10.2.75 Blue - 15A.3 x 0.8 997-193 23.4 19.95 10.2.75 Yellow - 24 A.3 x 0.8 3-78 24.51 22.57 19.3 14.15 Yellow - 24 A.3 x 0.8 997-2587 24.51 22.57 19.3 14.15 Fully Insulated Female Push-On 100 Per Pack Order Tab Size Code 1+ 5+ 10+ 50+ + Red 10-Amp 4.8 x 0.8 150-304 22.40 18.82 10.39 5.7 4.8 x 0.8 997-1874 22.40 18.82 10.39 5.7.3 x 0.8 150-305 23.38 21.42 13.4.82.3 x 0.8 997-1882 23.38 21.42 13.4.82 Blue 15-Amp 4.8 x 0.8 150-30 21.43 20.15 11.3.48 4.8 x 0.8 997-1890 21.43 20.15 11.3.48.3 x 0.8 150-307 24.3 22.0 14.94 7.45.3 x 0.8 997-1904 24.3 22.0 14.94 7.45 Yellow-24 Amp.3 x 0.8 150-308 34.8 30.87 17.4 9.72.3 x 0.8 997-1912 34.8 30.87 17.4 9.72 20980 20981 FREE to all account holders Notification of obsolete, end of line and end of stock items Replacement or upgrade recommendations Blade Contact Blade Size Order Code 1+ 5+ 10+ 50+ + Red - 19 Amp 18 x 2.3 150-32 19.28 17.34 10.92 4.50 18 x 2.3 997-1971 19.28 17.34 10.92 4.0 Blue - 27 Amp 18 x 2.3 150-327 22.81 21.21 11.25 5.4 18 x 2.3 997-1980 22.81 21.21 11.25 5.4 Yellow - 48 Amp 10 x 2.8 472-580 29.58 27.3 17.04 8.07 10 x 2.8 997-2390 29.58 27.3 17.04 8.14 Male Bullet 100 Per Pack Bullet Size Order Code 1+ 5+ 10+ 50+ + Red - 10 Amp 4mm 150-34 17.52 15.57 9.42 4.88 4mm 997-2013 17.52 15.57 9.42 4.88 Blue - 15 Amp 5mm 150-347 17.34 15.42 9.33 4.84 5mm 997-2021 17.34 15.42 9.33 4.84 Yellow - 24 Amp 5mm 472-591 23.9 21.12 15.57 9.24 5mm 997-2404 23.9 21.12 15.57 9.24 Female Bullet 20984 2098 20987 254 1,000s more products available at www.farnell-newarkinone.com.sg Prices are in Singapore Dollars and exclusive of GST. Due to the volatile nature of certain products, prices are subject to change without notice.

Farnell Page 255 Date: 17-08-0 time:21:28 255 Bullet Size Order Code 1+ 5+ 10+ 50+ + Red - 10 Amp 4mm 150-348 22.50 20.91 10.2.27 4mm 997-2030 22.50 20.91 10.2.27 Blue - 1 Amp 5mm 150-349 25.05 18.30 11.88 7.38 5mm 997-2048 25.05 18.30 11.88 7.38 Yellow - 24 Amp 5mm 472-08 25.30 22.39 14.94 10.28 5mm 997-2412 25.30 22.39 14.94 10.28 Butt Splice 100 Per Pack Order Code 1+ 5+ 10+ 50+ + Red - 19 Amp 150-350 17.21 15.91 9.09 4.21 Red - 19 Amp 997-205 17.21 15.91 9.09 4.21 Blue - 27 Amp 150-351 18.31 15.75 8.04 3.87 Blue - 27 Amp 997-204 18.31 15.75 8.04 3.91 Yellow - 48 Amp 472-10 2.3 23.39 13.30.0 Yellow - 48 Amp 997-2420 2.3 23.39 13.30.0 Interlocking Nylon Disconnectors 100 Per Pack Order Tab Size Male/Female Code 1+ 5+ 10+ 50+ + Red - 12 Amp.3 x 0.8 Female 58-170 3.41 30.12 23.83 17.57.3 x 0.8 Female 997-2471 3.05 29.82 23.59 17.40.3 x 0.8 Male 58-182 37.8 31.32 24.77 18.28.3 x 0.8 Male 997-2480 37.49 31.01 24.52 18.10 Blue - 1 Amp.3 x 0.8 Female 58-194 37.49 31.01 24.52 18.10.3 x 0.8 Female 997-2498 37.49 31.01 24.52 18.10.3 x 0.8 Male 58-200 30.82 25.45 20.9 17.35.3 x 0.8 Male 997-2501 37.49 31.01 24.52 18.10 20988 219845 100 Per Pack Tab Size Order Code 1+ 5+ 10+ 50+ + Red - 12 Amp.3 x 0.8 58-145 38.38 31.77 25.10 18.54.3 x 0.8 997-2455 38.00 31.4 24.85 18.3 Blue - 1 Amp.3 x 0.8 58-157 40.43 33.49 2.42 19.51.3 x 0.8 997-243 40.03 33.1 2.1 19.32 Heat Shrinkable Duraseal Miniature Conductor Range Ì Designed for smaller cross sectional area cable Ì Smaller insulation sleeve diameter gives improved crimp profile on cable insulation Ring (Miniature Conductor) Ì Protects against water, condensation, salt and corrosion Ì Provides strain relief Ì Protects against vibration Ì Completely insulates and protects electrical terminations Ì UL recognised and CUL 91J4, File E8781, Lloyds Listed 5247HH02-93 Temperature range -55 C to +125 C Insulation resistance 10MΩ Dielectric strength 1000V Chemical/fluid resistant Pack Order List No. Qty Code 1+ 5+ 10+ 25+ DS-18-22 Red splice 100 309-100 8.73 2.48 59.24 54.53 DS-14-1 Blue splice 100 309-112 8.73 2.48 59.24 54.53 DS-10-12 Yellow splice 50 309-124 48.12 43.73 41.37 38.1 DR-2-40 Red ring 4mm 100 309-13 5.75 59.78 5.7 52.20 DR-2-50 Red ring 5mm 100 309-148 5.75 59.78 5.7 52.20 DR-2-0 Red ring mm 100 309-150 75.8 8.99 5.43 0.21 DR--40 Blue ring 4mm 100 309-197 5.75 59.78 5.7 52.20 DR--50 Blue ring 5mm 100 309-1703 5.75 59.78 5.7 52.20 DR--0 Blue ring mm 100 309-1715 75.8 8.9 5.43 0.21 DR-4-40 Yellow ring 4mm 50 309-11 50.58 4.01 43.0 40.17 DR-4-50 Yellow ring 5mm 50 309-173 50.58 4.01 43.0 40.17 DR-4-0 Yellow ring mm 50 309-185 50.58 4.01 43.0 40.17 DP-2-3 Red.35 push on 100 309-1727 10.99 97.2 92.23 84.91 DP--3 Blue.35 push on 100 309-1739 10.99 97.2 92.23 84.91 Conductor Size: yellow 0.2-0.5 sq.mm Single strand 0.35-0.7mm 21004 209874 DAVICO Ratchet Crimp Tool DAVICO 209931 An adjustable ratchet crimp tool for pre-insulated terminals. The tool crimps red, blue and yellow insulated terminals and features simultaneous compression of both conductor and insulation. During the crimping process a digit is indented above the conductor crimp to verify correct usage i.e. Red=1, Blue=2 and Yellow=5. List No. DHCR15 Order Code 1+ 5+ 10+ + Crimp Tool 150-352 184.85 1.83 10.80 1+ 5+ 10+ Spare Spring (pack of 2) 43-152.93.03 5.22 Female Nylon Flag Disconnectors 209871 21984 100 Per Pack Stud Size Ring Order mm Width Code 1+ 5+ 10+ 50+ + Yellow - 15 Amp 2 5 58-212 18.09 14.99 11.84 8.73 2.5 5 58-224 14.91 12.34 10.12 8.37 2.5 5 997-2510 18.09 14.99 11.84 8.73 3 5 58-23 18.27 15.14 11.9 8.82 3 5 997-2528 18.09 14.99 11.84 8.73 4.5 58-250 20. 17.08 13.51 9.98 4.5 997-253 20. 17.08 13.51 9.98 5 8 58-21 20. 17.08 13.51 9.98 Fork (Miniature Conductor) DAVICO Compliant Non-compliant Limited stock - RoHS replacement available RoHS Sales Tel: (5) 788 0200 300,000 products, stocked and ready to despatch 255

Farnell Page 25 Date: 17-08-0 time:21:29 25 100 Per Pack Stud Size Fork Order mm Width Code 1+ 5+ 10+ 50+ + Yellow - 13 Amp 2 5 58-273 18.80 15.54 12.29 9.08 3 5 58-285 18.80 15.54 12.29 9.08 3 5 997-2544 18.80 15.54 12.29 9.08 3.5 58-297 19.87 1.40 12.97 9.5 3.5 997-2552 19.7 1.24 12.84 9.47 4.5 58-303 19.7 1.24 12.84 9.47 4.5 997-250 19.7 1.24 12.84 9.47 5 8 58-315 19.7 1.24 12.84 9.47 Butt Splice & Female Push-On (Miniature Conductor) Plasti Grip Metric Insulated Terminals 58-327 58-340 100 Per Pack Order Code 1+ 5+ 10+ 50+ + Butt Splice Yellow - 15 Amp 58-327 34.45 28.50 22.57 1. Yellow - 15 Amp 997-2579 34.45 28.50 22.57 1. Female Push-On Tab Size 2.8 x 0.5 58-339 2.27 21.73 17.21 12.8 2.8 x 0.8 58-340 2.27 21.73 17.21 12.8 Ì Funnel entry wire barrels allow easier wire insertion Ì Inner serations improve overall tensile strength for a reliable connection Ì Crimp locating ribs are moulded into the insulation for perfect crimp tool positioning Ì Vinyl sleeve for improved wire protection Temperature range -25 C to +90 C PVC -55 C to +105 C Nylon Terminal Tin plated copper Insulation Spades, ring, blades, butt splices, wire pins PVC Receptacles (including shrouded) Nylon. Wire Details Insulation Colour Red Blue Yellow Wire Size in mm 2 0.25-1.5 1.04-2.3 2.3 -.4 Single Stranded Wire 0.57-1.44 1.14-1.82 1.82-2.89 Size Dia. in mm Equivalent A.W.G. 22-18 1-14 12-10 Equivalent S.W.G. 29-17 17-13 11 - Suitable Metric Cables Stranded 19/0.15 13/0.2 1/0.2 19/0.2 14/0.25 24/0.2 19/0.25 32/0.2 40/0.2 19/0.3 Single 1/0.9 1/1.13 19/0.3 7/0.5 21/0.3 30/0.25 19/0.335 3/0.2 28/0.3 35/0.3 51/0.25 1/1.38 1/1.78 19/0.45 44/0.3 7/0.85 5/0.3 5/0.3 37/0.4 159/0.2 84/0.3 7/1.04 1/2.25 209875 20987 Stud Size List No. Order Code 100+ 500+ 3K+ Red M3/3.5 3205 434-3803 0.31 0.28 0.22 M5 34155 434-3815 0.31 0.28 0.22 M5 3415 434-3827 0.31 0.28 0.22 Blue M3/3.5 3415 434-3839 0.31 0.28 0.22 M4 341 434-3840 0.31 0.28 0.22 M5 3417 434-3852 0.31 0.28 0.22 M 13058. 308-529 0.41 0.34 0.28 M 13058 105-040 0.41 0.35 0.2 Yellow M4 15015 434-384 0.47 0.41 0.38 M5 3417 434-387 0.47 0.41 0.38 M 15019 308-5302 0. 0.47 0.44 Ring - Plasti Grip Stud Size Order Code 100+ 500+ 3K+ Red M2.5 342101-1. 587-059 0.38 0.31 0.28 M2.5 342101-1 105-388 0.33 0.27 0.20 M3/3.5 34142 434-3888 0.34 0.31 0.25 M4 34148 434-3890 0.34 0.31 0.25 M5 34149 434-390 0.34 0.31 0.25 M 34150 434-3918 0.34 0.31 0.25 M8 34151 434-3920 0.41 0.38 0.28 Blue M2.5 342141-1 587-102 0.38 0.31 0.25 M2/2.5 34157 434-3931 0.38 0.31 0.28 M3/3.5 34158 434-3943 0.34 0.31 0.28 M4 3410 434-3955 0.34 0.31 0.28 M5 130102 434-397 0.34 0.31 0.28 M 342145-1. 587-140 0.34 0.34 0.25 M 342145-1 105-389 0.40 0.33 0.24 M8 3413 434-3979 0.50 0.47 0.38 Yellow M3/3.5 342182-1. 587-13 0.40 0.38 0.34 M3/3.5 342182-1 105-390 0.47 0.38 0.29 M4 34853 434-3980 0.44 0.41 0.31 M5 10292 434-3992 0.47 0.41 0.34 M 34855 434-4005 0.47 0.41 0.34 M8 3485 434-4017 0.47 0.41 0.34 M10 10300 308-5284 0. 0.59 0.47 Available until stocks are exhausted Blade - Plasti Grip 209880 AWG=American Wire Gauge SWG=Standard Wire Gauge Conductor Make up Metric cables i.e. 19/0.15=19 Strands of 0.15mm diamater 209878 209881 Spade - Plasti Grip Blade Size List No. Order Code 100+ 500+ 3K+ Red 14089-2 587-217 0.50 0.47 0.38 Blue 140971-2 587-229 0.53 0.50 0.41 Receptacle - Plasti Grip 209879 25 1,000s more products available at www.farnell-newarkinone.com.sg Prices are in Singapore Dollars and exclusive of GST. Due to the volatile nature of certain products, prices are subject to change without notice.

Farnell Page 257 Date: 17-08-0 time:21:30 257 Width List No. Order Code 100+ 500+ 3K+ Red 42599-2. 587-242 0.50 0.47 0.38 42599-2 105-391 0.50 0.43 0.32, shrouded 735278 587-278 0.5 0.53 0.50 Blue 9-10313-2 587-254 0.53 0.50 0.41, shrouded 73510 587-280 0.59 0.53 0.41 Yellow 150432-1 587-2 0.3 0.59 0.47 Butt Splice - Plasti Grip 209882 Tab Size Ins Dia. Order (mm) (mm) List No. Code 10+ 100+ 500+ 1K+ Red 4.8 x 0.5 1.52-3.43 2-520409-2 488-422 0.31 0.28 0.25 0.22 4.8 x 0.8 1.52-3.43 2-520411-2 488-434 0.31 0.28 0.25 0.22.3 x 0.8 1.52-3.43 2-520407-2 488-40 0.38 0.34 0.31 0.28 Blue 4.8 x 0.5 2.29-4.0 3-520410-2 488-44 0.31 0.28 0.25 0.22 4.8 x 0.8 2.29-4.0 3-520412-2 488-458 0.31 0.28 0.25 0.22.3 x 0.8 2.29-4.0 3-520408-2 488-483 0.38 0.34 0.31 0.28 Ultra-Fast, Fully Insulated Faston Flag Receptacles Colour List No. Order Code 100+ 500+ 3K+ Red 34070 587-321 0.38 0.31 0.25 Blue 34071 587-333 0.38 0.34 0.28 Yellow 34072 587-345 0.82 0.75 0.59 209884 Tab Size Ins Dia. Order (mm) (mm) List No. Code 10+ 100+ 500+ 1K+ Red 4.8 x 0.5 4.12 2-520335-2 488-355 0.44 0.38 0.34 0.31 4.8 x 0.8 4.12 2-520337-2 488-37 0.44 0.38 0.34 0.31.3 x 0.8 4.19 2-520129-2 488-380 0.50 0.41 0.38 0.34 Blue 4.8 x 0.5 4.70 3-520339-2 488-379 0.44 0.38 0.34 0.31.3 x 0.8 4.70 3-520133-2 488-392 0.50 0.41 0.38 0.34 210001 Ultra-Fast / Ultra Fast Plus Fully Insulated Terminals Ì One piece insulation prevents shock and short hazards Ì Funnel wire entry Ì Wire stop Ì Visual inspection of crimp and wire brush Ì Colour coded by wire size Ultra-Fast, Fully Insulated Faston Receptacles Ì Approvals UL recognised, CSA, VDE Ì Ultra-fast plus complies with IEC380, 01,950 and UL1950 requirements for secondary means of insulation fixing Ì Meets NEMA DC-2 for quick connect terminals (flag meets mechanical standard only) 210005 Crimp Tool and Die Sets Ultra Fast / Ultra Fast Plus List No. Order Code 1+ Handtool Frame 2-14AWG 58078-3 488-495 12.00 Die Set 22-18AWG 90390-3 49-157 519.00 1-14AWG 90391-3 49-19 528.00 22-18AWG (UF+) 58079-3 49-170 1,142.74 12AWG only 224027-2 309-4947 528.00 210000 Tab size Ins. Dia. Order (mm) (mm) List No. Code 10+ 100+ 500+ 1K+ Red 2.8 x 0.5 3.05 2-520084-2 488-252 0.28 0.25 0.22 0.20 2.8 x 0.8 3.05 2-520273-2 488-24 0.28 0.25 0.22 0.20 4.8 x 0.5 3.43 2-520182-2 488-27 0.25 0.22 0.19 0.17 4.8 x 0.8 3.43 2-520194-2 488-288 0.25 0.22 0.19 0.1.3 x 0.8 3.43 2-520184-2 488-30 0.38 0.31 0.28 0.25.3 x 0.8 5.85 2-52024-2 488-318 0.38 0.31 0.28 0.25 Blue 4.8 x 0.8 4.0 3-520125-2 488-290 0.25 0.22 0.19 0.18.3 x 0.8 4.0 3-350820-2 488-320 0.38 0.31 0.28 0.25.3 x 0.8.0 3-520141-2 488-331 0.38 0.31 0.28 0.25 Yellow.3 x 0.8 8.13 4-520448-2 488-343 0.38 0.31 0.28 0.25 Ultra-Fast Plus, Fully Insulated Faston Receptacles 210004 210003 Ratchet Crimp Tool For Plasti Grip, PIDG & Solistrand Crimps Ì Suitable for Plasti-Grip, PIDG and Solistrand range of terminals Ì Parallel action with ratchet control Ì Provides a professional crimp termination when used with appropriate die set Ì Supplied with full instructions Ì Also see low cost crimp tool, Pro-Crimper Note: 1) The tool is not suitable for use with lipped blades 2) The solistrand die set covers 0.25-.mm 2 cable range List No. Order Code 1+ 5+ Ratchel Crimp Tool 19400 587-357 435.09 Die Set Plasti-Grip, PIDG Die Set 19404 588-143 10.50 99.21 Solistrand 19409 970-57 120.9 109.5 219847 Compliant Non-compliant Limited stock - RoHS replacement available RoHS Sales Tel: (5) 788 0200 300,000 products, stocked and ready to despatch 257

Farnell Page 258 Date: 17-08-0 time:21:31 258 Pre-Insulated Diamond Grip (PIDG) Ì High quality terminals and splices for use in hazardous conditions Ì Colour coded by wire size to eliminate termination errors Ì Bonded nylon to copper sleeve ensures high dielectric strength after crimping Ì Copper terminals are electro-tinned for corrosion resistance Ì Wire barrel has inner serations to give maximum contact with the wire Ì Meet the requirements of military standards MIL-T-7928 and BS4G178 Ì Fully CSA approved and UL recognised Colour List No. Order Code 50+ 500+ 3K+ Red 15142 58-870 0.2 0.59 0.5 Blue 1504 58-882 0.74 0.72 0.9 Yellow 15049 58-894 0.77 0.75 0. Blade - PIDG Temperature range -55 C to +105 C Insulation Polyamide Terminal Electroplated copper Wire Details Insulation Colour Red Blue Yellow Wire Size in mm 2 0.25-1.5 1.04-2.3 2.3 -.4 Single Stranded Wire 0.57-1.44 1.14-1.82 1.82-2.89 Size Dia. in mm Equivalent A.W.G. 22-18 1-14 12-10 Equivalent S.W.G. 29-17 17-13 11 - Suitable Metric Cables Stranded 19/0.15 13/0.2 1/0.2 19/0.2 14/0.25 24/0.2 19/0.25 32/0.2 40/0.2 19/0.3 Single 1/0.9 1/1.13 19/0.3 7/0.5 21/0.3 30/0.25 19/0.335 3/0.2 28/0.3 35/0.3 51/0.25 1/1.38 1/1.78 19/0.45 44/0.3 7/0.85 5/0.3 5/0.3 37/0.4 159/0.2 84/0.3 7/1.04 1/2.25 Colour List No. Order Code 50+ 500+ 3K+ Red 023-2 139-5154 1.01 0.81 0.2 Blue 024-2 11-48 1.01 0.81 0.2 Receptacle - PIDG 38389 20988 Butt Splice - PIDG Colour List No. Order Code 50+ 500+ 3K+ Red 320559 58-924 1.09 1.08 0.99 Blue 32052 58-93 1.1 1.03 0.89 Yellow 320570 58-948 1.89 1.71 1.47 209887 Width List No. Order Code 50+ 500+ 3K+ Red.3 x 0.8 40903-1 58-833 0.75 0.72 0.9 4.8 x 0.5 9-010481-1 308-5375 0.78 0.72 0. 4.8 x 0.8 9-010483-1 308-533 0.78 0.72 0.59 2.8 x 0.5 40923-1 58-845 0.94 0.75 0.53 2.8 x 0.8 155-1 308-5387 0.3 0.59 0.5 Blue.3 x 0.8 40905-1 58-857 1.03 0.90 0.84 Yellow.3 x 0.8 40907-1 58-89 1.47 1.38 1.05 Ring - PIDG 209891 Flat Tab - PIDG Colour List No. Order Code 50+ 500+ 3K+ Red 150730. 58-900 0.59 0.53 0.47 Red 150730 105-387 0.3 0.40 0.34 Blue 790347-0 58-912 0.59 0.53 0.47 Wire Pin - PIDG 209888 209889 Stud Size List No. Order Code 50+ 500+ 3K+ Red M3/3.5 3151 58-38 0.74 0. 0.50 M4 320551 58-40 0.84 0.9 0.53 M4.5 3153 58-51 M5 0-0130008-0 421-7380 0.47 M 320571 58-75 0.82 0.72 0.59 M8 320572 58-87 1.07 0.87 0.59 Blue M3/3.5 32051 58-99 0.71 0.5 0.47 M4 32050 58-705 0.74 0. 0.50 M5 0-0130094-0 421-7433 0.53 M5 1303 58-729 0.73 0.3 0.5 M 32053 58-730 0.82 0.9 0.53 M8 320575 58-742 0.90 0.72 0. Yellow M4 32058 58-754 0.7 0.9 0.5 M4.5 311 58-7 0.79 0.9 0.5 M5 0-0130171-0 421-7470 0.93 M 32059 58-780 0.88 0.75 0.59 M8 32057 58-791 1.15 1.09 1.04 M10 10138 308-5351 1.53 1.38 1.2 M12 323784. 58-808 2.22 1.89 1.74 M12 323784 105-385 2.09 1.30 1.11 Available until stocks are exhausted 209892 258 1,000s more products available at www.farnell-newarkinone.com.sg Prices are in Singapore Dollars and exclusive of GST. Due to the volatile nature of certain products, prices are subject to change without notice.

Farnell Page 259 Date: 17-08-0 time:21:32 259 Spade - PIDG Metric Insulated Terminals - DIN 4237 Stud Size List No. Order Code 50+ 500+ 3K+ Red M3/3.5 34080. 58-584 0.39 0.37 0.37 M3/3.5 34080 105-383 0.71 0.45 0.39 M4 32050 58-59 0.70 0.7 0.53 M5 32051. 308-5314 1.02 0.87 0.75 M5 32051 105-041 1.01 0.3 0.54 Blue M3/3.5 32058 58-02 0.59 0.50 0.44 M4 3205 58-14 0.75 0.72 0.50 M5 3200 308-532 0.75 0.75 0.9 Yellow M3/3.5 32859 58-2 0.74 0.72 0. M4 32588 58-950 0.97 0.84 0.75 M5 32589 308-5338 1.09 1.02 0.87 M 13025 308-5340 1.2 0.9 0.81 /209893 Wire Details Insulation Colour Red Blue Yellow Wire Size in mm 2 0.25-1.5 1.04-2.3 2.3 -.4 Single Stranded Wire 0.57-1.44 1.14-1.82 1.82-2.89 Size Dia. in mm Equivalent A.W.G. 22-1 1-14 12-10 Equivalent S.W.G. 29-17 17-13 11 - Suitable Metric Cables Stranded 19/0.15 13/0.2 1/0.2 19/0.2 14/0.25 24/0.2 19/0.25 32/0.2 40/0.2 19/0.3 Single 1/0.9 1/1.13 19/0.3 7/0.5 21/0.3 30/0.25 19/0.335 3/0.2 28/0.3 35/0.3 51/0.25 1/1.38 1/1.78 AWG=American Wire Gauge SWG=Standard Wire Gauge Conductor Make up Metric cables i.e. 19/0.15=19 strands of 0.15mm diameter. Ring 19/0.45 44/0.3 7/0.85 5/0.3 5/0.3 37/0.4 159/0.2 84/0.3 7/1.04 1/2.25 209894 PIDG Introduction Kit PIDG Kit Ì General purpose - vibration resistant Ì Wire range 0.25-.mm Ì Contents: 320 pieces, 19 different PIDG terminal and splices Ì Excludes crimp tool - suitable tool 319-4127 Ì Packed in grey long life plastic box List No. Order Code 1+ 1534. 319-4115 18.21 1534 105-09 18.21 Ì General purpose - vibration resistant Ì Wire range 0.25-.mm Ì Contents: 900 pieces (50 x 18) different PIDG terminal and splices Ì Excludes crimp tool - suitable crimp tool 319-4127 Ì Packed in metal box with drop handle List No. Order Code 15154. 319-4103 387.54 15154 105-08 352.40 Fast access to over 300,000 products Over 125,000 technical datasheets Technical attribute search Quick buy facility Instant order confirmation www.farnell-newarkinone.com.sg 21009 210072 Stud Size mm List No. Order Code 1+ 5+ 10+ 3 FVWS1.25-3* 209-4 29.57 24.17 20.03 4 FVWS1.25-M4 209-478 29.57 24.17 20.03 5 FVWS1.25-5* 209-480 29.57 24.17 20.03 FVWS1.25-209-491 34.73 28.43 23.57 8 FVWS1.25-8 209-508 34.39 28.15 23.34 3 FVWS2-S3.3 209-510 30.8 25.10 20.77 4 FVWS2-M4* 209-521 30.8 25.10 20.77 5 FVWS2-M5 209-533 30.8 25.10 20.77 FVWS-* 209-545 3.82 30.11 24.91 8 FVWS2-8 209-557 3.82 30.11 24.91 Yellow, 50 Per Pack 4 FVWS5.5-4 209-59 23.3 19.95 1.83 5 FVWS5.5-5* 209-570 25.21 20.4 17.05 FVWS5.5-209-582 33.02 2.58 21.12 8 FVWS5.5-8* 209-594 33.02 2.58 21.12 Please note: All items marked * are included in the Maintenance Engineers Kit 329-090. Stud Size mm List No. Order Code 1+ 5+ 10+ 3 FVWS1.25-3 (LF)* 999-2880 29.57 24.17 20.03 4 FVWS1.25-M4 (LF) 999-2898 29.57 24.17 20.03 5 FVWS1.25-5 (LF)* 999-2901 29.57 24.17 20.03 FVWS1.25- (LF) 999-2910 34.73 28.43 23.57 8 FVWS1.25-8 (LF) 999-2928 34.39 28.15 23.34 3 FVWS2-S3.3 (LF) 999-293 30.8 25.10 20.77 4 FVWS2-M4 (LF)* 999-2944 30.8 25.10 20.77 5 FVWS2-M5 (LF) 999-2952 30.8 25.10 20.77 FVWS2- (LF)* 999-290 3.82 30.11 24.91 8 FVWS2-8 (LF) 999-2979 3.82 30.11 24.91 Yellow, 50 Per Pack 4 FVWS5.5-4 (LF) 999-2987 23.3 19.95 1.83 5 FVWS5.5-5 (LF)* 999-2995 25.21 20.4 17.05 FVWS5.5- (LF) 999-3002 33.02 2.58 21.12 8 FVWS5.5-8 (LF)* 999-3010 33.02 2.58 21.12 Please note: All items marked * are included in the Maintenance Engineers Kit 999-3215. Worried about the part number lottery? Count on us for traceability -visit www.rohs.info 219848 Compliant Non-compliant Limited stock - RoHS replacement available RoHS Sales Tel: (5) 788 0200 300,000 products, stocked and ready to despatch 259

Farnell Page 20 Date: 17-08-0 time:21:32 20 Fork Butt Splice 219849 Stud Size List No. Order Code 1+ 5+ 10+ mm List No. Order Code 1+ 5+ 10+ FVC-1.25* 209-831 38.1 31.49 25.71 3 FVWS1.25-B3A* 209-00 29.57 24.17 20.03 4 FVWS1.25-YS4A 209-12 29.57 24.17 20.03 FVC-2* 209-843 40.3 33.48 27.38 Yellow, 50 Per Pack 3 FVWS2-M3A 210-523 30.8 25.10 20.77 FVC-5.5* 209-855 33.5 27.22 23.85 4 FVWS2-YS4A* 209-48 30.8 25.10 20.77 Please note: All items marked * are included in the Maintenance Engineers Kit - 329-090 Please note: All items marked * are included in the Maintenance Engineers Kit 329-090. 219851 Stud Size mm List No. Order Code 1+ 5+ 10+ 3 FVWS1.25-B3A (LF)* 999-3029 29.57 24.17 20.03 4 FVWS1.25-YS4A (LF) 999-3037 29.57 24.17 20.03 3 FVWS2-M3A (LF) 999-3207 30.8 25.10 20.77 4 FVWS2-YS4A (LF)* 999-3045 30.8 25.10 20.77 List No. Order Code 1+ 5+ 10+ FVC-1.25 (LF)* 999-319 38.1 31.49 25.71 FVC-2 (LF)* 999-3177 40.3 33.48 27.38 Yellow, 50 Per Pack FVC-5.5 (LF)* 999-3185 33.5 27.22 23.85 Please note: All items marked * are included in the Maintenance Engineers Kit 999-3215. Please note: All items marked * are included in the Maintenance Engineers Kit - 999-3215 Push-On Compact Terminal Kit Plastic Case Kit Contents: Tab Size mm List No. Order Code 1+ 5+ 10+ 2.8 x 0.5 FVDDF1.25-110A-5 209-715 35.7 29.47 24.11 2.8 x 0.8 FVDDF1.25-110A-8 209-703 35.7 29.47 24.11 4.8 x 0.5 FVDDF1.25-187A-5 209-739 3.89 30.37 24.88 4.8 x 0.8 FVDDF1.25-187A-8 209-727 3.89 30.37 24.88.3 x 0.8 FVDDF1.25-250A* 209-740 40.3 33.48 27.38 4.8 x 0.8 FVDDF2-187A-8 209-74 38.1 31.49 25.71.3 x 0.8 FVDDF2-250A* 209-77 40.3 33.48 27.38 Yellow, 50 Per Pack 9.5 x 1.2 FVDDF5.5-375A 209-790 40.03 33.03 27.00 Please note: All items marked * are included in the Maintenance Engineers Kit 329-090. Tab Size mm List No. Order Code 1+ 5+ 10+ 2.8 x 0.5 FVDDF1.25-110A-5 LF) 999-301 35.7 29.47 24.11 2.8 x 0.8 FVDDF1.25-110A-8 (LF) 999-3053 35.7 29.47 24.11 4.8 x 0.5 FVDDF1.25-187A-5 (LF) 999-3088 3.89 30.37 24.88 4.8 x 0.8 FVDDF1.25-187A-8 (LF) 999-3070 3.89 30.37 24.88.3 x 0.8 FVDDF1.25-250A (LF)* 999-309 40.3 33.48 27.38 4.8 x 0.8 FVDDF2-187A-8 (LF) 999-3100 38.1 31.49 25.71.3 x 0.8 FVDDF2-250A (LF)* 999-3118 40.3 33.48 27.38 Yellow, 50 Per Pack 9.5 x 1.2 FVDDF5.5-375A (LF) 999-312 40.03 33.03 27.00 Please note: All items marked * are included in the Maintenance Engineers Kit 999-3215. Pin Pin Size mm List No. Order Code 1+ 5+ 10+ 1.9 x 9.5 FVWSPC1.25F=9 209-80 30.8 25.10 20.77 1.9 x 9.5 FVWSPC1.25 F-9 (LF) 999-3134 30.8 25.10 20.77 1.9 x 9.5 FVWSPC-2F=9 209-818 35.8 29.21 24.17 1.9 x 9.5 FVWSPC-2 F-9 (LF) 999-3142 35.8 29.21 24.17 Yellow, 50 Per Pack 2. x 9.5 FVWSPC-5.5 209-820 32.35 2.00 20.70 2. x 9.5 FVWSPC-5.5 (LF) 999-3150 32.35 2.00 20.70 219850 209898 Ring - DIN 4237 209-4 25 off 209-77 20 off 209-480 25 off 209-843 25 off 209-740 20 off 209-582 10 off 209-831 25 off 209-855 5 off 209-521 25 off Crimp tool 1 off 150-291 25 off 999-2880 25 off 999-3118 20 off 999-2901 25 off 999-3177 25 off 999-309 20 off 999-3002 10 off 999-319 25 off 999-3185 5 off 999-2944 25 off Crimp tool 1 off 150-291 25 off 209900 List No. Order Code JK-P1 209-87.12 JK-P1 (LF) 999-3193.12 Maintenance Engineers Kit Metal Case Kit Contents: 209-4 25 off 150-292 25 off 209-480 25 off 209-843 25 off 209-00 25 off 209-77 25 off 150-28 25 off 209-570 25 off 209-831 25 off 209-594 25 off 209-740 25 off 257-047 25 off 209-521 25 off 209-855 25 off 209-545 25 off 150-302 25 off 209-48 25 off 210-511 1 off 150-291 25 off 999-2880 25 off 150-292 25 off 999-2901 25 off 999-3177 25 off 999-3029 25 off 999-3118 25 off 150-28 25 off 999-2995 25 off 999-319 25 off 999-3010 25 off 999-309 25 off 257-047 25 off 999-2944 25 off 999-3185 25 off 999-290 25 off 150-302 25 off 999-3045 25 off 210-511 1 off 150-291 25 off 209901 List No. Order Code JK-M2 329-090 188.4 JK-M2 (LF) 999-3215 188.4 33447 20 1,000s more products available at www.farnell-newarkinone.com.sg Prices are in Singapore Dollars and exclusive of GST. Due to the volatile nature of certain products, prices are subject to change without notice.

Farnell Page 21 Date: 17-08-0 time:21:33 21 Stud Size mm List No. Order Code 1+ 5+ 10+ Vinyl Insulation 3 FVGS3-1 38-4390 29.5 24.17 20.03 3 FVGS3-1 (LF) 999-3223 29.5 24.17 20.03 4 FVGS4-1 38-4418 29.5 24.17 20.03 4 FVGS4-1 (LF) 999-3231 29.5 24.17 20.03 5 FVGS5-1 38-4420 34.38 28.15 23.34 5 FVGS5-1 (LF) 999-3240 34.38 28.15 23.34 FVGS-1 38-4431 34.38 28.15 23.34 FVGS-1 (LF) 999-3258 34.38 28.15 23.34 8 FVGS8-1 38-4443 34.38 28.15 23.34 8 FVGS8-1 (LF) 999-32 34.38 28.15 23.34 3 FVGS3-2.5 38-4455 30.9 25.10 20.77 4 FVGS4-2.5 38-4479 30.9 25.10 20.77 4 FVGS4-2.5 (LF) 999-3274 30.9 25.10 20.77 5 FVGS5-2.5 38-4480 3.82 30.11 24.91 5 FVGS5-2.5 (LF) 999-3282 3.82 30.11 24.91 FVGS-2.5 38-4492 3.82 30.11 24.91 FVGS-2.5 (LF) 999-3290 3.82 30.11 24.91 8 FVGS8-2.5 38-4509 3.82 30.11 24.91 8 FVGS8-2.5 (LF) 999-3304 3.82 30.11 24.91 Blue, 50 Per Pack 10 FVGS10-2.5 38-4510 2.07 21.38 17.9 10 FVGS10-2.5 (LF) 999-3312 2.07 21.38 17.9 12 FVGS12-2.5 38-4522 2.07 21.38 17.9 Yellow, 50 Per Pack 4 FVGS4-38-4534 25.20 20.4 17.05 4 FVGS4- (LF) 999-3320 25.20 20.4 17.05 5 FVGS5-38-454 25.20 20.4 17.05 5 FVGS5- (LF) 999-3339 25.20 20.4 17.05 FVGS- 38-4558 33.03 2.58 21.12 FVGS- (LF) 999-3347 33.03 2.58 21.12 8 FVGS8-38-450 33.03 2.58 21.12 8 FVGS8- (LF) 999-3355 33.03 2.58 21.12 10 FVGS10-38-4571 40.29 33.45 27.77 10 FVGS10- (LF) 999-333 40.29 33.45 27.77 12 FVGS12-38-4583 40.29 33.45 27.77 12 FVGS12- (LF) 999-3371 40.29 33.45 27.77 Nylon Insulation 2. FNGS2.5-1 38-4947 38.4 31.91 2.51 4 FNGS4-1 38-4972 38.4 31.91 2.51 FNGS-1 38-499 44.72 37.11 30.82 8 FNGS8-1 38-5009 44.72 37.11 30.82 3 FNGS3-2.5 38-5010 39.90 33.13 27.51 4 FNGS4-2.5 38-5034 39.90 33.13 27.51 5 FNGS5-2.5 38-504 39.90 33.13 27.51 FNGS-2.5 38-5058 47.8 39.77 33.00 8 FNGS8-2.5 38-500 47.8 39.77 33.00 Blue, 50 Per Pack 10 FNGS10-2.5 38-5071 31.78 2.42 21.89 Yellow 2.5-2 mm, 50 Per Pack 4 FNGS4-38-5095 32.77 27.22 22.0 5 FNGS5-38-5101 32.77 27.22 22.0 FNGS- 38-5113 42.92 35. 29.5 8 FNGS8-38-5125 42.92 35. 29.5 10 FNGS10-38-5137 52.39 43.50 3.08 12 FNGS12-38-5149 52.39 43.50 3.08 Male and Female - Bullet Approvals: UL File No. E42024, CSA File No. LR20812 Diameter O/S-Male I/S-Female List No. Order Code 1+ 5+ 10+ Vinyl Insulation - With Copper Sleeve - Male 3.9mm FVDGM1.25-5 38-4870 42.53 35.31 29.31 3.9mm FVDAGM1.25-5 (LF) 999-3517 42.53 35.31 29.31 4.95mm FVDGM2-7 38-4893 4.2 38.42 31.88 Female 3.9mm CVDGF1.25-5 38-4844 4.80 38.87 32.2 3.9mm CVDAGF1.25-5 (LF) 999-3495 4.80 38.87 32.2 mm3.9 CVDGF2-5 38-485 50.27 41.73 34.7 mm3.9 CVDAGF2-5 (LF) 999-3509 50.27 41.73 34.7 4.95mm CVDGF2-7 38-488 51.07 42.40 35.18 334473 Butt Splice - DIN 4237 Nominal Size DIN 4341 List No. Order Code 1+ 5+ 10+ Vinyl Insulation 1 FVGSC-1 38-471 38.17 31.8 2.32 1 FVGSC-1 (LF) 999-3428 38.17 31.8 2.32 2.5 FVGSC-2.5 38-4728 40.4 33.74 28.02 2.5 FVGSC-2.5 (LF) 999-343 40.4 33.74 28.02 Yellow, 50 Per Pack FVGSC- 38-4730 33.4 27.93 23.21 FVGSC- (LF) 999-3444 33.4 27.93 23.21 Nylon Insulation 1 FNGSC-1 38-5290 49.59 41.18 34.19 2.5 FNGSC-2.5 38-5307 52.80 43.85 3.40 Yellow, 100 Per Pack 0.5 FNGSC-0.5 38-5289 35.82 29.7 24.8 Yellow, 50 Per Pack FNGSC- 38-5319 43.72 3.34 30.14 Ratchet Crimp Tool Insulated Terminals Insulated Crimp Terminals - Imperial STA-KON BA Insulated Terminals Wire Details Insulation Colour Red Blue Yellow Wire Size in mm 2 0.25-1.5 1.04-2.3 2.3 -.4 Single Stranded Wire 0.57-1.44 1.14-1.82 1.82-2.89 Size Dia. in mm Equivalent A.W.G. 22-1 1-14 12-10 Equivalent S.W.G. 29-17 17-13 11 - Suitable Metric Cables Stranded 19/0.15 13/0.2 1/0.2 19/0.2 14/0.25 24/0.2 19/0.25 32/0.2 40/0.2 19/0.3 Single 1/0.9 1/1.13 Ratchet hand crimping tool for use with the following insulated terminal types: 1. Red 0.5-1.0mm 2 (AWG 20-1) 2. Blue 1.5-2.5mm 2 (AWG 1-14) 3. Yellow 4.0 -.0mm 2 (AWG 12-10) List No. Order Code 1+ Type: CS30L-44, Code Number: 0190 41002 WC-2210DIN 390-5573 34.23 19/0.3 7/0.5 21/0.3 30/0.25 19/0.335 3/0.2 28/0.3 35/0.3 51/0.25 1/1.38 1/1.78 AWG=American Wire Gauge SWG=Standard Wire Gauge. Conductor Make up Metric cables i.e. 19/0.15=19 Strands of 0.15mm diameter 19/0.45 44/0.3 7/0.85 5/0.3 5/0.3 37/0.4 159/0.2 84/0.3 7/1.04 1/2.25 334470 334497 209902 Compliant Non-compliant Limited stock - RoHS replacement available RoHS Sales Tel: (5) 788 0200 300,000 products, stocked and ready to despatch 21

Farnell Page 22 Date: 17-08-0 time:21:34 22 Ring Closed End Wire Joint Stud Size List No. Order Code 1+ 5+ 4BA 18RA- 120-811 24.51 20.8 2BA 18RA-10 120-812 22.3 18.98 4BA 14RB- 209-958 22.7 18.1 2BA 14RB-10 120-813 25.81 21.97 0BA 14RB-14 120-814 45.70 38.80 3 8" 14RB-38 120-815 43.39 3.94 Yellow, 50 Per Pack 2BA 10RC-10 120-81 20.21 17.41 0BA 10RC-14 210-020 20.10 17.0 3 8" 10RC-38 210-043 24.9 20.39 Fork Stud Size List No. Order Code 1+ 5+ 4BA 18RA-F 120-817 22.3 18.98 4BA 14RB-F 120-818 23.50 20.02 Crimp Tooling for Insulated Terminals A range of ergonomically designed full cycle action crimp tools. 209903 209904 Ì M series designed for single handed use and the K series for either single or double handed use Ì Soft rounded handles designed for optimal load distribution Ì Toggle action for mechanical advantage Pack Wire Dia. Qty Max. List No. Order Code 1+ 5+ 100 3.0 RB44 120-8171 37.01 31.44 50 4.0 RC55 120-8173 28.77 24.45 Ratchet Type Crimp Tool BA Ring L=229 Non Insulated Crimp Terminals 20990 Suitable for precision crimping of red, blue and yellow insulated terminals from 0.75 to mm 2. List No. Order Code WT2124Y 210-304 201.01 Pack Wire Size Stud Qty mm 2 Size List No. Order Code 1+ 5+ 100 0.3-1.4 A18-4 120-8174 14.8 12.47 100 0.3-1.4 4 A18-120-8175 15.85 13.48 100 0.3-1.4 2 A18-10 120-817 1.47 14.00 100 1.5-2.5 B14-4 120-8177 14.84 12.0 100 1.5-2.5 2 B14-10 120-8178 19.40 1.50 100 1.5-2.5 5. B14-14 120-8179 44.07 37.47 50 2.-.0 2 C10-10 120-8180 13.22 11.23 50 2.-.0 5. C10-14 120-8181 17.09 14.52 224237 224238 BA Fork MSA 0110 MSA 0110 single handed crimp tool for miniature yellow and red insulated terminals for 0.14-1.0mm 2 / 2-1 AWG wires Pack Wire Size Stud Qty mm 2 Size List No. Order Code 1+ 5+ 100 0.3-1.4 4mm A18-FL 120-8182 22.3 18.98 100 1.5-2.5 4mm B14-FL 120-8183 19.95 17.0 209913 KSA 070 KSA 070 double handed crimp tool for red, blue and yellow insulated terminals for 0.75-.0mm 2 / 22-10AWG wires Female Push-On Standard 90 Entry 209914 KAA 070 KAA 070 double handed crimp tool with asymetrical dies for premium crimps on standard and vibration resistant type terminals. 0.75-.0mm 2 / 22-10 AEG wires. Type Order Code 1+ 5+ 10+ MSA 0110 399-3000 23.04 214.8 192.54 KSA 070 399-3012 235.14 213.81 191.1 KAA 070 399-3024 248.4 228.0 204.0 239310 Tab Size.35mm Pack Wire Size Qty mm 2 List No. Order Code 1+ 5+ Standard 100 0.3-1.4 A18-250 120-8185 49.31 41.9 100 1.5-2.5 B14-250 120-818 43.45 3.98 50 2.-.0 C10-250F 120-8187 49.87 42.51 90 C Entry 50 1.5-2.5 B14-250A 120-8188 5.17 55.40 Push-On and Insulators Manufactured to BS5057. 22 1,000s more products available at www.farnell-newarkinone.com.sg Prices are in Singapore Dollars and exclusive of GST. Due to the volatile nature of certain products, prices are subject to change without notice.

Farnell Page 23 Date: 17-08-0 time:21:35 23 Materials Brass, bright tin plated Temperature range Terminals 110 C max PVC Insulators -25 C to +75 C List No. F/RS-007=257-837 F/EH-0017=209-375 F/RS-001.=209-314 RS7785.001 F2.8-1 BRASS/TINNED=117-4955 F/RS-003.=209-32 RS7900 F.3-1 BRASS/TINNED=117-495 F/RS-004.=209-338 RS7901 F.3-2.5 BRASS/TINNED=117-4957 F/EH-0018.=209-33 EH30 PVC NAT=117-4958 FOR SUITABLE CRIMP TOOLS SEE ORDER CODES 241-301 & 225-42 100 Per Pack Wire Size Tab Size mm 2 Order Code 1+ 5+ 10+ 50+ + Female Push-On 2.8 x 0.5 0.4-1.0 257-837 7.15.81.1 5.3 2.8 x 0.8 0.4-1.0 209-314 7.8 7.25.1 5.71 2.8 x 0.8 0.4-1.0 117-4955 7.8 7.25.1 5.71.35 x 0.8 0.5-1.0 209-32 10.7 10.18 9.27 7.85.35 x 0.8 0.5-1.0 117-495 10.7 10.18 9.27 7.85.35 x 0.8 1.0-2.5 209-338 10.9.35 x 0.8 1.0-2.5 117-4957 10.9 Insulation Covers 2.8 209-33 10.72 10.04 9.52 2.8 117-4958 10.72 10.04 9.52.3 209-375 10.99 10.24 9.08 219852 Stud Size Order Code 10+ 100+ 250+ 500+ LRT Style Terminal Ring M5 735-498 0.23 0.21 0.19 0.1 M5 735-501 0.23 0.21 0.19 0.1 LRB Style Terminal Ring 0.5 to 1mm 2 M3 735-528 0.23 0.21 0.19 0.1 M4 735-53 0.23 0.21 0.19 0.1 M5 735-544 0.23 0.21 0.19 0.1 M 735-552 0.23 0.21 0.19 0.1 1 to 2.5mm 2 M3 735-50 0.23 0.21 0.19 0.1 M4 735-579 0.23 0.21 0.19 0.1 M5 735-587 0.23 0.21 0.19 0.1 M 735-595 0.23 0.21 0.19 0.1 Order Multiple=1 JUCS-RB/RT 735-510 928.05 Ratchet Crimp Tools DAVICO LTO Series Push On Terminals Non Insulated Ring With Insulation Grip Ì Push on terminals straight Ì Brass, pre tinned Tab Size Wire Size Insulation Ø List No. Order Code.35 x 0.8mm 0.5-1.0mm² 2. - STO-1.0T-250N 32-543.35 x 0.8mm 1.0-2.5mm² 2. - STO-2.5T-250N 32-5448 4.8 x 0.5mm 0.5-1.0mm² 2.0 - STO-1.0T-187N-5 32-5412 4.8 x 0.8mm 0.5-1.0mm² 2.0 - STO-1.0T-187N-8 32-5424 2.8 x 0.8mm 0.5-1.0mm² 1.5 - STO-1.0T-110N-8 32-5394 2.8 x 0.5mm 0.5-1.0mm² 2.0 - STO-1.0T-110N-5 32-5400 List No. Order Code 100+ 500+ 1K+ 5K+ Push On Terminal STO-1.0T-250N 32-543 0.11 STO-2.5T-250N 32-5448 0.11 STO-1.0T-187N-5 32-5412 0.09 0.07 0.0 0.0 STO-1.0T-187N-8 32-5424 0.09 0.07 0.0 0.0 STO-1.0T-110N-8 32-5394 0.05 STO-1.0T-110N-5 32-5400 0.05 Cover 2.8mm 01019 32-5503 0.0 4.8mm 4803-187 32-5515 0.0.3mm 01022-250 32-5527 0.0 Ì DIN 4225 (exept M) Ì Steel, tin plated, Serrated Ring - LRT Ì Brass, tin plated, Standard Ring - LRB Wire Size Wire Size Insulation Type mm 2 AWG O/D (mm) List No. Order Code LRT M5 0.5 to 1.0 20 to 18 2.0 to 3.3 LRT-1.0T-M5S 735-498 LRT M5 1.0 to 2.5 18 to 14 2.7 to 4.3 LRT-2.5T-M5S 735-501 LRB M3 0.5 to 1.0 20 to 18 2.0 to 3.3 LRB-1.0T-M3 735-528 LRB M4 0.5 to 1.0 20 to 18 2.0 to 3.3 LRB-1.0T-M4 735-53 LRB M5 0.5 to 1.0 20 to 18 2.0 to 3.3 LRB-1.0T-M5 735-544 LRB M 0.5 to 1.0 20 to 18 2.0 to 3.3 LRB-1.0T-M 735-552 LRB M3 1.0 to 2.5 18 to 14 2.7 to 4.3 LRB-2.5T-M3 735-50 LRB M4 1.0 to 2.5 18 to 14 2.7 to 4.3 LRB-2.5T-M4 735-579 LRB M5 1.0 to 2.5 18 to 14 2.7 to 4.3 LRB-2.5T-M5 735-587 LRB M 1.0 to 2.5 18 to 14 2.7 to 4.3 LRB-2.5T-M 735-595 230253 348834 241-301 L=205 225-42 L=22 Two full cycling ratchet crimp tools with manual release. Suitable for crimping non-insulated crimps, with simultaneous compression of both conductor and insulation. Suitable Suitable Cable Handle Terminal Size (mm 2 ) Colour List No. Order Code 2.8mm 0.125 to 0.5 Red DHCRF05 241-301.35mm 0.5 to Blue DHCRF15 225-42 Terminal Order Size Code 1+ 5+ 10+ + Crimp tool 2.8mm 241-301 154.47 139.74 120.90.35mm 225-42 187.0 172.05 148.89 1+ 5+ 10+ Spare spring (pk of 2) 43-152.93.03 5.22 Faston and Insulators 892-50 892-543 892-531 892-518 892-555 892-57 892-520 892-579 892-580 Ì Maufactured to BS5057, IEC70, DIN4244/47/49 20991 Materials Brass, tin plated Temperature range Terminals 105 C max Polyethylene (straight boots) Insulators 75 C max Polypropylene (flag) 20993 100 Per Pack Wire Size Order Tab Size mm 2 List No. Code Price Per Pack Female Push-On 1+ 10+ 20+.35 x 0.8 0.3-0.81 4199-2 892-488 29.11 1.95 15.9.35 x 0.8 0.81-2.12 41729-2 892-490 2.11 18.72 17.4.35 x 0.8 2.0-5.33 41829-1 892-50 29.30 20.25 19.20 10 per Pack Piggyback 1+ 100+ 200+.35 x 0.8 0.81-2.12 150755-3 892-518 4.37 2.49 2.28 Female Flag.35 x 0.8 1-2.5 180429-2 892-520 2.84 2.13 1.80 Male Push-On.35 x 0.8 0.81-2.12 000-2 892-531 3.5 2.85 2.7 100 per Pack Insulation Covers 1+ 10+ 20+ Femal Push-On, Clear 2-180930-0 892-543 9.2 4.88 4.5 Femal Push-On, Black 2-180930-5 892-57 9.87 5.17 4.84 Compliant Non-compliant Limited stock - RoHS replacement available RoHS Sales Tel: (5) 788 0200 300,000 products, stocked and ready to despatch 23

Farnell Page 24 Date: 17-08-0 time:21:3 24 10 Per Pack 1+ 100+ 200+ Male Push-On, Clear 735093 892-579 2.74 2.18 2.08 Flag, Clear 180984 892-580 3.01 1.7 1.59 Each 1+ Crimp Tool 825514-1 92-955 10.43 Ring Terminals Ampower III Kit Kit contains: Order Code Mftrs List No. Wire Size Stud Size Quantity 131-10 719538-1 10mm 2 M4 15 131-118 719538-2 10mm 2 M5 15 131-120 719538-3 10mm 2 M 15 131-131 719538-4 10mm 2 M8 15 131-143 719538-5 10mm 2 M10 15 131-155 719551-1 1mm 2 M5 15 131-17 719551-2 1mm 2 M 15 131-179 719551-3 1mm 2 M8 15 131-180 719551-4 1mm 2 M10 15 131-192 719551-5 1mm 2 M12 15 131-209 719552-1 25mm 2 M 15 131-210 719552-2 25mm 2 M8 15 131-222 719552-3 25mm 2 M10 15 131-234 719552-4 25mm 2 M12 15 131-24 719553-1 35mm 2 M 15 131-258 719553-2 35mm 2 M8 15 131-20 719553-3 35mm 2 M10 15 131-271 719553-4 35mm 2 M12 15 Order Code Mftrs List No. Wire Size Stud Size Quantity 105-5954 719538-1 10mm 2 M4 15 105-5955 719538-2 10mm 2 M5 15 105-595 719538-3 1mm 2 M5 15 105-5957 719538-4 25mm 2 M 15 105-5958 719538-5 25mm 2 M8 15 105-5959 719551-1 25mm 2 M12 15 105-590 719551-2 35mm 2 M 15 105-591 719551-3 35mm 2 M8 15 232578 Description List No. Order Code 1+ 5+ 10+ Ampower III Kit 1478357-2. 388-2901 323.52 298.08 275.01 Ampower III Kit 1478357-2 105-291 300.08 Rachet Type Crimp Tool Ì A comprehensive kit of Ampower III ring terminals. Ì Ideal for maintenance and electrical engineers Ring Terminals AMPOWER III Ring Terminals Ring Terminals Ì For use with wire sizes 10-300mm Ì Accepts IEC228 and IEC719 designated cables Ì Electrolytic copper construction with bright tin finish Ì Wire sizes and stud holes clearly marked in metric Ì Performance based on UL48.A, BS4579-1, IEC77 Ì Easy to crimp Ì Resistant to oxidation and corrosion Wire Size Stud Dimensions mm (in) Part Order mm 2 M Dia W D C L Type Number Code 10 M4 4.2(.15) 10(.9) 5(.197) (.23) 2(1.024) A 719538-1. 131-10 10 M4 4.2(.15) 10(.9) 5(.197) (.23) 2(1.024) A 719538-1 105-5954 10 M5 5.2(.205) 10(.394) 5(.197).5(.25) 27(1.03) A 719538-2. 131-118 10 M5 5.2(.205) 10(.394) 5(.197).5(.25) 27(1.03) A 719538-2 105-5955 10 M.4(.252) 11(.433) 5(.197) 7(.27) 28(1.102) B 719538-3 131-120 10 M8 8.3(.327) 15(.591) 5(.197) 8(.315) 31(1.220) B 719538-4 131-131 M10 10.3(.40) 17(.9) 5(.197) 10(.394) 35(1.378) C 719538-5 131-143 1 M5 5.2(.205) 12(.472) (.23).5(.25) 29(1.142) A 719551-1. 131-155 1 M5 5.2(.205) 12(.472) (.23).5(.25) 29(1.142) A 719551-1 105-595 M.4(.252) 12(.472) (.23) 7(.27) 30(1.181) A 719551-2 131-17 M8 8.3(.327) 15(.591) (.23) 8(.315) 33(1.299) B 719551-3 131-179 M10 10.3(.40) 17(.9) (.23) 10(.394) 37(1.457) C 719551-4 131-180 M12 12.8(.504) 22(.8) (.23) 12(.472) 42(1.54) C 719551-5 131-192 25 M.4(.252) 15(.591) 7.7(.303) 7(.27) 32(1.20) A 719552-1. 131-209 25 M.4(.252) 15(.591) 7.7(.303) 7(.27) 32(1.20) A 719552-1 105-5957 M8 8.3(.327) 15(.591) 7.7(.303) 8(.315) 35(1.378) A 719552-2. 131-210 M8 8.3(.327) 15(.591) 7.7(.303) 8(.315) 35(1.378) A 719552-2 105-5958 M10 10.3(.40) 17(.9) 7.7(.303) 10(.394) 39(1.535) B 719552-3 131-222 M12 12.8(.504) 22(.8) 7.7(.303) 12(.472) 44(1.732) C 719552-4. 131-234 M12 12.8(.504) 22(.8) 7.7(.303) 12(.472) 44(1.732) C 719552-4 105-5959 35 M.4(.252) 17(.9) 9(.354) 7(.27) 38(1.49) A 719553-1. 131-24 35 M.4(.252) 17(.9) 9(.354) 7(.27) 38(1.49) A 719553-1 105-590 M8 8.3(.327) 17(.9) 9(.354) 8(.315) 41(1.14) A 719553-2. 131-258 M8 8.3(.327) 17(.9) 9(.354) 8(.315) 41(1.14) A 719553-2 105-591 M10 10.3(.40) 17(.9) 9(.354) 10(.394) 45(1.772) A 719553-3 131-20 M12 12.8(.504) 22(.8) 9(.354) 12(.472) 50(1.99) B 719553-4. 131-271 M12 12.8(.504) 22(.8) 9(.354) 12(.472) 50(1.99) B 719553-4 105-592 50 M.4(.252) 19(7.48) 10.5(.413) 7(.27) 41(1.14) A 719554-1. 131-283 50 M.4(.252) 19(7.48) 10.5(.413) 7(.27) 41(1.14) A 719554-1 105-594 M8 8.3(.327) 19(7.48) 10.5(.413) 8(.315) 44(1.732) A 719554-2 131-295 M10 10.3(.40) 19(7.48) 10.5(.413) 10(.394) 48(1.890) A 719554-3 131-301 M12 12.8(.504) 22(.8) 10.5(.413) 12(.472) 53(2.087) B 719554-4. 131-313 M12 12.8(.504) 22(.8) 10.5(.413) 12(.472) 53(2.087) B 719554-4 105-595 70 M8 8.3(.327) 24(.945) 13.2(.520) 8(.315) 47(1.850) A 719555-1. 131-325 70 M8 8.3(.327) 24(.945) 13.2(.520) 8(.315) 47(1.850) A 719555-1 105-59 M10 10.3(.40) 24(.945) 13.2(.520) 10(.394) 51(2.008) A 719555-2. 131-337 M10 10.3(.40) 24(.945) 13.2(.520) 10(.394) 51(2.008) A 719555-2 105-598 M12 12.8(.504) 24(.945) 13.2(.520) 12(.472) 5(2.205) A 719555-3. 131-349 M12 12.8(.504) 24(.945) 13.2(.520) 12(.472) 5(2.205) A 719555-3 105-599 M14 14.5(.571) 24(.945) 13.2(.520) 14(.551) 0(2.32) A 719555-4 131-350 M1 1.5(.49) 27(.945) 13.2(.520) 1(.30) 3(2.480) B 719555-5. 131-32 M1 1.5(.49) 27(.945) 13.2(.520) 1(.30) 3(2.480) B 719555-5 105-5972 FOR SUITABLE CRIMP TOOL 131-430 SEE OPPOSITE 21983 Ì Suitable for use with AMPOWER III connectors Ì No die sets required. Rotating die set included in head design List No. Order Code 1+ Crimp tool 708777-4 131-430 535.4 209997 Wire Size Stud Size Order mm 2 m List No. Code 10+ 50+ 100+ 500+ + 10 4 719538-1. 131-10 0.45 0.42 0.39 0.33 10 4 719538-1 105-5954 0.59 0.50 0.42 10 5 719538-2. 131-118 0.47 0.44 0.41 0.38 10 5 719538-2 105-5955 0.5 0.5 0.47 10 719538-3 131-120 0.51 0.45 0.42 0.39 10 8 719538-4 131-131 0.5 0.50 0.47 0.41 10 10 719538-5 131-143 0.59 0.53 0.50 0.44 1 5 719551-1. 131-155 0.78 0.72 0.9 0.59 1 5 719551-1 105-595 0.78 0.70 0.59 1 719551-2 131-17 0.78 0.72 0.9 0.59 1 8 719551-3 131-179 0.78 0.72 0.9 0.59 1 10 719551-4 131-180 0.87 0.78 0.72 0. 1 12 719551-5 131-192 0.94 0.84 0.78 0.9 25 719552-1. 131-209 1.07 0.99 0.93 0.81 25 719552-1 105-5957 0.92 0.79 0. 25 8 719552-2. 131-210 1.07 0.99 0.93 0.81 25 8 719552-2 105-5958 1.1 0.99 0.83 25 10 719552-3 131-222 1.07 0.99 0.93 0.81 25 12 719552-4. 131-234 1.28 1.14 1.08 0.9 25 12 719552-4 105-5959 1.28 1.13 0.95 35 719553-1. 131-24 1.47 1.35 1.2 1.11 24 1,000s more products available at www.farnell-newarkinone.com.sg Prices are in Singapore Dollars and exclusive of GST. Due to the volatile nature of certain products, prices are subject to change without notice.

Farnell Page 25 Date: 17-08-0 time:21:38 25 Wire Size Stud Size Order mm 2 m List No. Code 10+ 50+ 100+ 500+ + 35 719553-1 105-590 1.47 1.31 1.10 35 8 719553-2. 131-258 1.47 1.35 1.2 1.11 35 8 719553-2 105-591 1.47 1.31 1.10 35 10 719553-3 131-20 1.47 1.35 1.2 1.11 35 12 719553-4. 131-271 1.47 1.35 1.2 1.11 35 12 719553-4 105-592 1.47 1.31 1.10 50 719554-1. 131-283 1.78 1.59 1.53 1.35 50 719554-1 105-594 1.78 1.0 1.34 50 8 719554-2 131-295 1.78 1.59 1.53 1.35 50 10 719554-3 131-301 1.78 1.59 1.53 1.35 50 12 719554-4. 131-313 1.78 1.59 1.53 1.35 50 12 719554-4 105-595 1.78 1.0 1.34 70 8 719555-1. 131-325 2.37 2.13 2.04 1.77 70 8 719555-1 105-59 2.37 2.12 1.77 70 10 719555-2. 131-337 2.37 2.13 2.04 1.77 70 10 719555-2 105-598 2.37 2.12 1.77 70 12 719555-3. 131-349 2.53 2.28 2.1 1.89 70 12 719555-3 105-599 2.53 2.27 1.89 70 14 719555-4 131-350 2.93 2.1 2.49 2.19 70 1 719555-5. 131-32 2.93 2.1 2.49 2.19 70 1 719555-5 105-5972 3.05 2.1 2.18 Ring Terminals SOLISTRAND Ring Terminals SOLISTRAND Fork/Spade Terminals Stud Stud Size Size Pack Order Metric Imperial Qty List No. Code 1+ 5+ 10+ 25+ + Wire Range 0.25-1.mm 2 (22-1 AWG) M3/3.5 4BA 100 3195 214-4037 37.9 31.89 28.8 25.14 M4 3BA 200 34117 214-4049 75.41 3.75 57.27 50.34 M5 3BA 100 34118 17-7010 40.25 34.02 30.57 2.82 Wire Range 2.7-.mm 2 (12-10 AWG) M3/3.5 4BA 50 322451 214-4050 21.34 18.0 1.23 14.25 M4 3BA 100 32995 214-337 101.28 85.5 7.95 7.59 M5 2BA 50 35495. 214-0007 3.38 30.75 27.3 24.27 M5 2BA 50 35495 105-029 30.38 24.87 SOLISTRAND Parallel and Butt Splices 209942 Ì Designed to accept solid, stranded or irregular shaped copper wires Ì Available in ring, spade/fork, parallel splice and butt splice Ì Manufactured from high conductivity annealed copper Ì Brazed barrel seams with electro-tin plated finish Ì Serrated/dimpled surface for improved conductivity Ì Temperature rating 170 C max. Ì Approved CAA, MOD, CSA and BS4G178. UL registered Recommended Crimping Tools Wire Size AMP Crimp Tool Order Code 19400 Tool 587-357 0.25-.mm / 22-10 AWG 19409 Die Set 970-57 Stud Stud Size Size Pack Order Metric Imperial Qty List No. Code 1+ 5+ 10+ 25+ + Wire Range 0.25-1.mm 2 (22-1 AWG.) M2.5 BA 100 34104 213-7574 30.90 24.3 17.85 15.2 M3 4BA 100 34105 214-0779 30.90 24.3 17.85 15.2 M4 3BA 100 34108 213-9900 30.90 24.3 17.85 15.2 M4.5 2BA 100 34109 213-9224 31.92 27.12 20.58 17.49 M5 2BA 100 130017. 970-70 33.82 28.83 27.12 23.7 M5 2BA 100 130017 105-425 21.23 17.87 M 0BA 100 34113 213-7914 33.3 30.21 28.50 20.58 Wire Range 0.25-2.mm 2 (1-14 AWG.) M3 4BA 100 34120 213-921 32.94 25.41 18.18 1.73 M4 3BA 100 34122 213-9273 33.3 2.07 20.58 18.28 M4.5 2BA 100 34123 213-9297 33.3 2.07 20.58 18.73 M5 2BA 100 13010 970-82 37.41 33.3 31.92 27.42 M 0BA 100 34124 214-2399 37.41 33.3 30.90 27.81 M 5/1" 100 34125 213-7501 35.97 32.31 29.70 2.70 M10 3 8" 100 3412 213-7902 4.18 39.03 35.07 30.84 Wire Range 2.7-.mm 2 (12-10 AWG.) M3 4BA 100 3345 970-94 47.95 37.08 35.01 31.23 M4 3BA 100 32994 970-700 41.18 37.41 31.92 28.41 M4.5 2BA 100 33457 213-9170 41.19 37.41 31.92 27.0 M5 2BA 100 130191 970-712 44.9 40.50 38.10 33.99 M 1 4" 100 33458 17-7124 44.97 41.19 37.08 3.33 M8 5/1" 100 33459 17-713 49.7 44.97 42.21 37.74 M10 3 8" 100 33220 213-7379 4.43 58.23 54.3 48.87 Wire Range.7-10.5mm 2 (8 AWG.) M5 2BA 50 10013 970-803 71.40 7.2 1.77 40.78 M 0BA 50 35247. 214-2454 75.88 72.30 8.97 55.20 M 0BA 50 35247 105-032.29 55.8 50.2 42.18 M8 5/1" 50 3342 213-9212 73.29 9. 3.9 52.8 M10 3 8" 50 1005 970-73 10.2 9.54 88.29 59.25 Wire Range 10.-1.7mm 2 ( AWG.) M5 2BA 25 130552 970-827 52.70 42.09 38.70 35.34 M OBA 25 3345 185-385 52.70 42.09 38.70 35.34 M8 5/1" 25 334 213-7872 52.71 42.09 38.70 35.34 M10 3 8" 25 10032 970-750 91.98 89.7 87.45 57. M12 1 2" 25 3808 970-71 91.82 89.52 87.24 78.09 M1 5 8" 25 3809 970-839 101.49 97.2 94.95 89.10 Wire Range 1.8-2.mm 2 (4 AWG.) M OBA 25 3349 214-3240 58.19 54.48 51.33 39.12 M8 5/1" 25 33470 214-3252 58.19 54.48 51.33 39.12 M10 3 8" 25 10075 970-773 144.54 140.58 13.95 109.59 M12 1 2" 25 358 970-785 179.85 170.88 11.70 153.45 Wire Range 2.7-42.4mm 2 (2 AWG.) M8 5/1" 25 322870 213-884 78.59 72.78 9.3 3.33 Wire Range 42.5-0.5mm 2 (1/0 AWG.) M12 1 2" 25 3919 140-9323 91.98 84.72 81.0 74.4 Wire Range 0.-7.2mm 2 (2/0 AWG.) M8 5/1" 25 3922 140-9347 151.41 M9 3 8" 25 3923 213-890 131.58 111.24 99.99 87.78 209941 Wire Range Pack Order Parallel Splices List No. Code 1+ 5+ 10+ 25+ + 0.25-1.mm 2 100 34130 (22-1AWG) 970-90 33.3 2.07 17.49 15.30 1-2.mm 2 100 34137 (1-14AWG) 970-918 33.3 2.07 17.49 15.75 2.7-.mm 2 100 34138 (12-10AWG) 970-920 41.18 33.3 2.07 20.94.7-10.5mm 2 50 34318 (8 108AWG) 970-931 52.50 49.89 44.97 22.58 Butt Splices 0.25-1.mm 2 100 31818 (22-1AWG) 213-9108 41.18 33.3 23.7 20.25 1.0-2.mm 2 100 31819 (1-14AWG) 214-0433 41.18 33.3 23.7 20.25 2.7-.mm 2 100 32151. (12-10AWG) 214-0550 0.0 48.72 40.83 33.3 2.7-.mm 2 100 32151 (12-10AWG) 105-031 41.12 33.7.7-10.5mm 2 50 390 (8 88AWG) 970-943 92.07 87.48 79.38 48.51 10.-1.7mm 2 50 388. ( 8AWG) 214-0494 114.78 97.02 87.21 7.5 10.-1.7mm 2 50 388 ( 8AWG) 105-030 95.34 80.09 Terminals and Splices Solistrand Kit Kit contains: Order Code Mftrs List No. Wire Range Stud Size Quantity Ring Terminals 214-0779 34105 0.25-1.mm 2 M3 50 213-9900 34108 0.25-1.mm 2 M4 50 213-9224 34109 0.25-1.mm 2 M4.5 50 105-425 130017 0.25-1.mm 2 M5 50 213-7914 34113 0.25-1.mm 2 M 50 213-921 34120 1.0-2.mm 2 M3 50 213-9273 34122 1.0-2.mm 2 M4 50 213-9297 34123 1.0-2.mm 2 M4.5 50 970-82 13010 1.0-2.mm 2 M5 50 214-2399 34124 1.0-2.mm 2 M 50 970-94 3345 2.7-.mm 2 M3 50 209943 Ì A comprehensive kit of Solistrand terminals and splices. Ì Ideal for maintenance and electrical engineers Compliant Non-compliant Limited stock - RoHS replacement available RoHS Sales Tel: (5) 788 0200 300,000 products, stocked and ready to despatch 25

Farnell Page 2 Date: 17-08-0 time:21:39 2 Order Code Mftrs List No. Wire Range Stud Size Quantity Ring Terminals 970-700 32994 2.7-.mm 2 M4 50 213-9170 33457 2.7-.mm 2 M4.5 50 970-712 130191 2.7-.mm 2 M5 50 17-7124 33458 2.7-.mm 2 M 50 Butt Splices 213-9108 31818 0.25-1.mm 2 50 214-0433 31819 1.0-2.mm 2 50 105-031 32151 2.7-.mm 2 50 232585 Description List No. Order Code 1+ 5+ 10+ Solistrand Kit 1478358-2. 388-2913 323.52 298.08 275.01 Solistrand Kit 1478358-2 105-292 300.08 Ring Terminals DIN 4235 Electro tinned copper tube terminals to DIN 4235 Ì Inspection hole for wire depth, order codes 745-820, 745-832 Ì Chamfered cable entry DAVICO Copper tube terminals electro tinned to BS1872 (1984). IEC352-2 and ISO19. Chamfered cable entry aids cable insertion and even crimping. Note: When using flexible fine strand or welding cable it may be necessary to select the next larger terminal size i.e 35mm 2 fine strand select 50mm 2 terminal. The size of solid wire in mm 2 and the equivalent size of fine strand wire is marked on each terminal. Solid Wire Stud Wire Size mm 2 Size ØA ØB C D E List No. Order Code 5 5.2 3.8 10 5 23 D -5 29-074.5 3.8 12 27 D - 29-08 10 5 5.2 4.5 12 25 D 10-5 28-938 10.5 4.5 12 25 D 10-28-940 10 8 8.4 4.5 12 27 D 10-8 28-951 10 10 10.5 4.5 18 9 31 D 10-10 472-9 1.5 5.4 12 7 30 D 1-28-975 1 8 8.4 5.4 12 7 32 D 1-8 28-987 1 10 10.5 5.4 18 9 35 D 1-10 472-70 25.5.8 13 7 30 D 25-28-999 25 8 8.4.8 1 10 37 D 25-8 29-001 25 10 10.5.8 1 10 37 D 25-10 29-013 35 8 8.4 8.2 15.3 9 35 D 35-8 29-025 35 10 10.5 8.2 18 10 38 D 35-10 29-037 35 12 13 8.2 18 10 38 D 35-12 472-82 50 8 8.4 9.5 18 10 43 D 50-8 29-049 50 10 10.5 9.5 18 10 43 D 50-10 29-050 50 12 13 9.5 20 12 47 D 50-12 472-94 209917 10 Per Pack Solid Wire Stud Size mm 2 Size Order Code 1+ 10+ 25+ 50+ 5 29-074 3.24 2.99 2. 2.38 29-08 2.97 2.73 2.50 2.38 10 5 28-938 3.14 2.89 2.7 2.57 10 28-940 3.14 2.89 2.7 2.57 10 8 28-951 3.81 3.53 3.34 3.08 10 10 472-9 7.42.32 5.59 4.88 1 28-975.55.29 5.84 5.49 1 8 28-987.55 5.84 5.49 5.14 1 10 472-70 10.05 9.28 8.19 7.29 25 28-999 9.38 8.44 7.9 7.54 25 8 29-001 9.38 8.44 7.9 7.54 25 10 29-013 9.38 8.44 7.9 7.54 35 8 29-025 14.99 13.48 11.78 10.40 35 10 29-037 13.89 12.49 11.11 10.40 35 12 472-82 1.22 14.80 13.03 11.4 50 8 29-049 15.7 13.90 12.17 10.40 50 10 29-050 14.58 12.84 11.4 10.40 50 12 472-94 20.13 19.10 18.07 15.3 Note: When using fine strand flexible wire or welding cable it may be necessary to use the next gauge up in wire size mm 2 to enable easier cable entry. Solid Wire Stud Weight Wire Size mm 2 Size ØA ØB C D F G Kg/100 List No. Order Code 2.5 4 4.3 2.3 7.5 4 13 1.2 0.13 T2.5-4 120-8189 4.5 3 10.5 19 1.2 0.24 T4-120-8190 5 5.3 3.8 8.5.5 24 1.5 0.31 T-5 120-8191.4 3.8 8.5 7.5 24 1.5 0.30 T- 120-8192 10.4 4.5 9 7.5 27 1.5 0.3 T10-120-8193 10 8 8.4 4.5 13 10 27 1.3 0.39 T10-8 120-8194 1.4 5.5 13 7.5 3 2.5 1.18 T1-120-8195 1 8 8.4 5.5 13 10 3 2.5 1.18 T1-8 120-8197 1 10 10.5 5.5 17 12 3 2.5 1.20 T1-10 120-8198 25.4 7 14 7.5 38 3 1.49 T25-120-8199 25 8 8.4 7 1 10 38 3 1.57 T25-8 120-8200 25 10 10.5 7 17 12 38 3 1.58 T25-10 120-8201 25 12 13 7 19 13 38 3 1.54 T25-12 120-8203 35 8 8.4 8.2 17 10 42 3.5 2.75 T35-8 120-8204 35 10 10.5 8.2 19 12 42 3.5 2.85 T35-10 120-8205 50 8 8.4 10 20 10 52 4 4.5 T50-8 120-8207 50 10 10.5 10 22 12 52 4 4.5 T50-10 120-8208 70 10 10.5 11.5 24 12 55 4.5.15 T70-10 120-8209 95 10 10.5 13.5 28 12 5 5 9.15 T95-10 120-8210 10 Per Pack Wire Size mm 2 Stud Size Order Code 1+ 10+ 25+ 50+ 2.5 4 120-8189 2.12 1.73 1.33 1.14 4 120-8190 3.12 2.57 1.99 1.9 5 120-8191 12. 10.32 7.81.87 120-8192 12. 10.32 7.81.87 10 120-8193 12. 10.32 7.81.87 10 8 120-8194 12. 10.32 7.81.87 1 120-8195 18.98 15.49 11.72 10.32 1 8 120-8197 18.98 15.49 11.72 10.32 1 10 120-8198 18.98 15.49 11.72 10.32 25 120-8199 21.1 17.7 13.35 11.75 25 8 120-8200 21.1 17.7 13.35 11.75 25 10 120-8201 21.1 17.7 13.35 11.75 25 12 120-8203 21.1 17.7 13.35 11.75 35 8 120-8204 33. 27.44 20.83 18.33 35 10 120-8205 33. 27.44 20.83 18.33 50 8 120-8207 49.44 40.43 30.5 2.85 50 10 120-8208 47.75 38.9 29.49 25.88 70 10 120-8209 59.11 48.27 3.49 32.13 95 10 120-8210 94.9 77.31 58.4 51.43 Ring - DIN 4234 Stud Size mm List No. Order Code 1+ 5+ 10+ 0.1 to 0.5mm 2, (2 to 22 AWG) - 100 Per Pack 2 GS2-0.5 38-538 10.75 9.15 7.77 2.5 GS2.5-0.5 38-5370 10.75 9.15 7.77 3 GS3-0.5 38-5381 10.75 9.15 7.77 4 GS4-0.5 38-5400 10.75 9.15 7.77 5 GS5-0.5 38-5411 10.75 9.15 7.77 0.25 to 1.5mm 2, (22 to 1 AWG) - 100 Per Pack 2.5 GS2.5-1 38-5423 12.42 10.5 8.99 3 GS3-1 38-5435 12.42 10.5 8.99 3.5 GS3.5-1 38-5447 12.42 10.5 8.99 4 GS4-1 38-5459 12.42 10.5 8.99 5 GS5-1 38-540 12.42 10.5 8.99 8 GS8-1 38-5484 22.0 19.23 1.34 1 to 2.5mm 2, (1 to 12 AWG), 100 Per Pack 3 GS3-2.5 38-549 19.81 1.82 14.32 4 GS4-2.5 38-5514 123.13 5 GS5-2.5 38-552 19.81 1.82 14.32 GS-2.5 38-5538 21.80 18.52 15.7 8 GS8-2.5 38-5540 28.89 24.52 20.8 10 GS10-2.5 38-5551 18.59 15.83 13.42 12 GS12-2.5 38-553 18.59 15.83 13.42 2.5 to mm 2, (12 to 10 AWG) - 50 Per Pack 4 GS4-38-5575 17.08 14.54 12.3 5 GS5-38-5587 17.08 14.54 12.3 GS- 38-5599 17.08 14.54 12.3 8 GS8-38-505 21.80 18.52 15.7 10 GS10-38-517 25.42 21.4 18.39 to 10mm 2, (8 AWG) - 25 Per Pack 5 GS5-10 38-530 12.33 10.50 8.92 GS-10 38-542 12.33 10.50 8.92 8 GS8-10 38-554 13.80 11.72 9.95 10 GS10-10 38-5 1.05 13.4 11.59 12 GS12-10 38-578 28.8 24.49 20.83 209918 334474 2 1,000s more products available at www.farnell-newarkinone.com.sg Prices are in Singapore Dollars and exclusive of GST. Due to the volatile nature of certain products, prices are subject to change without notice.

Farnell Page 27 Date: 17-08-0 time:21:40 27 Stud Size mm List No. Order Code 1+ 5+ 10+ 10 to 1mm 2, ( AWG) - 25 Per Pack 5 GS5-1 38-580 17.5 14.93 12.8 GS-1 38-591 17.5 14.93 12.8 8 GS8-1 38-5708 19.84 1.85 14.32 10 GS10-1 38-5710 22.41 19.07 1.18 12 GS12-1 38-5721 41.79 35.57 30.21 1 to 25mm 2, (4 AWG) - 10 Per Pack 5 GS5-25 38-5733 14.7 12.49 10.3 GS-25 38-5745 14.7 12.49 10.3 8 GS8-25 38-5757 14.7 12.49 10.3 10 GS10-25 38-579 14.7 12.49 10.3 12 GS12-25 38-5770 23.43 19.90 1.92 1 GS1-25 38-5782 30.2 2.00 22.08 25 to 35mm 2, (2 AWG) - 10 Per Pack 10 GS10-35 38-5812 19.52 1.0 14.12 12 GS12-35 38-5824 2.71 22.9 19.29 35 to 50mm 2, (1/0 AWG) - 5 Per Pack 10 GS10-50 38-581 14.7 12.45 10.59 12 GS12-50 38-5873 15.73 13.35 11.3 1 GS1-50 38-5885 21.0 17.88 15.22 50 to 70mm 2, (2/0 AWG) - 5 Per Pack 8 GS8-70 38-5903 18.5 15.89 13.48 12 GS12-70 38-5927 18.5 15.89 13.48 Hydraulic Crimping Tool Hand Operated Ì Compact tool + case Ì Ideal for off site use (no power source required) Ì 35KN Crimping force Ì Crimp head rotates 30 for easy access Ì Crimp stroke 5-8mm Ì Can be released part way through crimp cycle Ì Die sets interchangeable in seconds Ì Audible "Click" on full crimp pressure Ì Handy carrying case for tool and up to 10 die sets Crimp Tool for Copper Tube Terminals Non Insulated Crimp Terminals - High Temperature Stratotherm L=390 Ì High quality terminals and splices for use in high temperature environment Ì Working temperature 340 C and 50 C Ì Corrosion and vibration resistant 340 CRing Tongues & Butt Splices 50 CRing Tongues & Butt Splices Terminal Body Copper Terminal Body Nickel Plating Nickel Ring Tongues 340 C Hexagon crimp DAVICO A high quality tool for crimping copper tube terminals with hexagon profile. A revolving die enables wire sizes between mm 2 and 50mm 2 to be easily crimped with minimal operator force. During the crimping process the solid core wire size is indented in the terminal to verify correct usage, ie,, 10, 1, etc. Metal body with black finish and rubber handles. List No. DHC 50H Order Code 1+ 5+ 10+ + 29-02 282.53 23.88 239.97 209922 Ì Manufactured within the limits of military specifications Ì UL registered & CSA Approved 21000 210018 Tool H=180 W=21 D=49 Carrying Case H=20 W=345 D=89 List No. Order Code 1+ + D3 745-8 1,179.15 Die Sets, 10, 1, 25, 35, 50, 70, 95mm 2 219854 Order Stud Size List No. Code 5+ 10+ 50+ 100+ + Section 0.25-1.mm 2 M3.5 322797 488-010 1.05 0.9 0.84 0.9 M4 322798 488-021 1.14 1.02 0.93 0.78 M5 322799 488-033 1.2 1.11 0.99 0.80 Section 1.0-2.mm 2 M4 32294 488-045 1.20 1.05 0.93 0.81 M5 32295 488-057 1.29 1.14 1.02 0.85 M 322733 488-09 1.35 1.23 1.08 0.88 Section 2.7-.mm 2 M4 32301 488-070 1.23 1.02 0.90 0.73 M 32303 488-082 1.50 1.35 1.20 0.99 M8 32304 488-094 1.5 1.50 1.35 1.0 Ring Tongues 50 C Ì 8 sizes from -95mm 2 Ì Hardened steel die jaws Ì Hexagonal style crimp Ì Die sets interchangeable in seconds Ì Crimp sizes stamped on die sides easily visible when in crimp tool Ì Crimp size embossed on copper tube during crimping Crimp Size mm 2 Order Code Crimp Size mm 2 Order Code 745-704 35 745-741 10 745-71 50 745-753 1 745-728 70 745-75 25 745-730 95 745-777 Order Code 1+ + + All Order Codes 138.94 209921 Stud Order Size List No. Code 1+ 10+ 50+ 100+ + Wire Range0.25-1.mm 2 M3.5 322872 488-100 2.82 2.52 2.25 1.22 M4 321895 488-112 2.93 2.4 2.34 1.23 M5 32189 488-124 3.0 2.7 2.4 1.27 Wire Range1.0-2.mm 2 M4 322334 488-13 3.00 2.7 2.40 1.30 M5 322335 488-148 3.09 2.79 2.4 1.34 M 322339 488-150 3.27 2.97 2.1 1.41 Wire Range2.7-.mm 2 M4 323745 488-11 3.37 2.85 2.52 1.71 M5 32380 488-173 3.84 3.45 3.09 2.3 M 32383 488-185 5.04 4.5 4.02 3.37 M8 32374 488-197 5.74 4.5 4.02 3.27 210019 Compliant Non-compliant Limited stock - RoHS replacement available RoHS Sales Tel: (5) 788 0200 300,000 products, stocked and ready to despatch 27

Farnell Page 28 Date: 17-08-0 time:21:40 28 Butt Splices 340 C. TAB Series Tabs Ì Faston tabs Ì Brass, pre tinned Order Wire Range List No. Code 5+ 50+ 100+ 250+ + 0.25-1.mm 2 32379 488-203 0.97 0.87 0.78 0.59 1.0-2.mm 2 323795 488-215 0.9 0.87 0.78 0.3 2.7-.mm 2 323755 488-227 1.2 1.47 1.32 0.78 Terminals and Splices Stratotherm Kit 210020 Ì A comprehensive kit of Stratotherm terminals and splices. Ì Ideal for maintenance and electrical engineers Tab Size Type List No. Order Code 2.8 x 0.5mm Straight TAB 3780058(MSTIN) 32-5552 2.8 x 0.8mm Straight TAB 3780088 (MSTIN) 347-2528 4.8 x 0.5mm Straight TAB3825058(MSTIN) 32-554 4.8 x 0.8mm Straight TAB3825088(MSTIN) 32-557.3 x 0.8mm Right Angle TAB387B8(MSTIN) 32-5590.3 x 0.8mm Straight TAB38A8(MSTIN) 32-5588 230255 Tab Size Order Code 100+ 500+ 1K+ 5K+ Push On Terminal 2.8 x 0.5 32-5552 0.05 0.05 0.04 0.03 2.8 x 0.8 347-2528 0.04 0.04 0.03 0.03 4.8 x 0.5 32-554 0.13 0.12 0.11 0.10 4.8 x 0.8 32-557 0.13 0.12 0.11 0.10.3 x 0.8 R/A 32-5590 0.20 0.18 0.17 0.14.3 x 0.8 32-5588 0.14 0.13 0.12 0.11 Kit contains: Order Code Mftrs List No. Wire Range Stud Size Quantity Ring Tongue 340 0 C 488-021 322798 0.25-1.mm 2 M4 30 488-045 32294 1.0-2.mm 2 M4 30 488-09 322733 1.0-2.mm 2 M 30 488-070 32301 2.7-.mm 2 M4 30 488-082 32303 2.7-.mm 2 M 30 488-094 32304 2.7-.mm 2 M8 30 Ring Tongue 50 0 C 488-112 321895 0.25-1.mm 2 M4 30 488-13 322334 1.0-2.mm 2 M4 30 488-150 322339 1.0-2.mm 2 M 30 488-11 323745 2.7-.mm 2 M4 30 488-185 32383 2.7-.mm 2 M 30 488-197 32374 2.7-.mm 2 M8 30 Butt Splices 340 0 C 488-203 32379 0.25-1.mm 2 NA 30 488-215 323795 1.0-2.mm 2 NA 30 488-227 323755 2.7-.mm 2 NA 30 Butt Splices 50 0 C 488-239 322324 0.25-1.mm 2 NA 30 488-240 322345 1.0-2.mm 2 NA 30 388-553 3239 2.7-.mm 2 NA 30 Description List No. Order Code 1+ + + Stratotherm Kit 1478359-2 105-294 73.84 PCB Spade Terminals PCB Spade Terminals 23258 Vertical Tab size=.35 x 0.8 PCB hole dia.=1. Manufactured to BS5057. Horizontal Tab size=.35 x 0.8 PCB hole dia.=1.5 Material: Brass, bright Tin plated Temperature (max.) 85 C Parallel Tab size=.35 x 0.8 PCB hole dia.=1. List No. F/RM-0121=257-849 F/RM-0118=117-2820 F/RM-0120=117-2822 WS.342-3815=342-3815 F/RM-0119=117-2821 22722 100 per pack Tab size Order Code 1+ 5+ 10+ 50+ + Vertical 2.8 x 0.5 257-849 4.4 4.21 3.9 3.05 2.8 x 0.8 342-3815 3.95 3.37 3.21 2.8 x 0.8 117-505 3.95 3.37 3.21.3 x 0.8 209-284 7.35 5.8 5.52 5.35.3 x 0.8 117-2820 7.35 5.8 5.52 5.35 Horizontal.3 x 0.8 209-29 12.29 11.22 10.33.3 x 0.8 117-2821 12.29 11.22 10.33 Parallel.3 x 0.8 209-302 11.75 10.5 9.7.3 x 0.8 117-2822 11.75 10.5 9.7 Sealed Heat Shrink Butt Splices Splice Terminals DAVICO Horizontal Tab size=.3 x 0.8 PCB hole dia.=1.5 Vertical Tab size=.3 x 0.8 PCB hole dia.=1. Material: Brass Tin Plated Temperature: 105 C Dimensions (mm) vertical horizontal E L W B E L T W 5,08 15,8,35 1, 10,5 21,0 5,08,35 209940 10 Per Pack Tab Size Order Vertical List No. Code 1+ 10+ 100+.35 x 0.8 2409-1 892-09.12 4.59 3.75 Horizontal 1+ 10+ 100+.35 x 0.8 1050-3 892-592 5.70 5.19 4.50 Heat shrink length (+1% -10%)=37 (yellow=42) Butt splice length=15 Heat shrinkable sealed splices providing a tough and long lasting environmental seal against immersion in solvents, oils, fluids and salt water. The wire insulation should be stripped to 8mm and then crimped into the ends of the butt splice. Hot air should then be applied to the sleeve until the tubing has shrunk to the cable size and the adhesive flows from the end of the splice, giving a fully sealed joint and additional strain relief. Dielectric strength 12kV Terminal Tinned Copper Insulation resistance 1000000MR Sleeve Clear Polyolefin Temperature range -55 C to +105 C Adhesive Hot melt 28 1,000s more products available at www.farnell-newarkinone.com.sg Prices are in Singapore Dollars and exclusive of GST. Due to the volatile nature of certain products, prices are subject to change without notice.

Farnell Page 29 Date: 17-08-0 time:21:41 29 Wire Size Wire Dia Max Heat Shrink Dia. (mm) mm 2 mm Before After Order Code Red 0.5-1.5 1.7 4.2 1.1 257-850 Red 0.5-1.5 1.7 4.2 1.1 997-2170 Blue 1.5-2.5 2.3 4.2 2.0 257-82 Yellow 3.0-.0 3.4 4.2 3.4 257-874 Yellow 3.0-.0 3.4 4.2 3.4 997-2188 FOR SUITABLE CRIMP TOOL, ORDER CODE 257-88 Order Code 1+ 10+ 50+ 100+ Red 257-850 25.7 22.3 19.52 18.3 Red 997-2170 25.7 22.3 19.52 18.3 Blue 257-82 28.38 25.20 23.82 20.8 Yellow 257-874 33.21 29.72 2.39 24.20 Yellow 997-2188 33.21 29.72 2.39 24.20 21985 Splicing Connectors - Scotchlok For Electrical Applications 871-351 871-3570 871-3588 871-359 871-300 871-318 871-32 Splicing Connectors - Scotchlok For Communication Applications 871-334 871-334 871-39 871-377 871-385 871-393 1. Cable insertion 2. Insulation shearing Ì Proven splicing technology for electrical applications Ì East to use and fast installation Ì Unique U contact provides dependable electrical connection 3. Crimped 871-3707 483-2528 1. Cable insertion 871-3723 2. Insulation shearing 871-3740 143-075 3. Crimped 871-37 Ì Proven splicing technology for communication applications Ì East to use and fast installation Ì Gel filled (gas tight) or dry versions available Ì Unique U contact provides dependable electrical connection Max Wire Range Insulation AWG (mm 2 Type O.D. mm Solid Wire) Special Features List No. Order Code In - Line 3.18 1-19 (1.3-0.9) Full pair U1B 871-377 In - Line 3.18 19-24 (0.9-0.5) Full Pair U1R 121-3188 2/3 Wire Butt 2.08 17-20 (1.15-0.5) For Aluminium Copper Outside port Solid Wire 1.93 Center port 19-24 (1.15-0.5) Copper UAL 871-393 Run/Tap Splice 2.08 19-2 (0.9-0.4) RUS Listed, Full featured UB2A. 483-2528 Run/Tap Splice 2.08 19-2 (0.9-0.4) RUS Listed, Full featured Dry UB2A-D 871-3707 2/3 Wire Butt 2.08 19-2 (0.9-0.4) RUS Listed, Full featured UR2 121-1044 2/3 Wire Butt 2.08 19-2 (0.9-0.4) RUS Listed, Full featured Dry UR2-D 871-3731 2 Wire Butt 1.52 22-2 (0.7-0.4) Moisture resistant seal UY 143-075 2 Wire Butt 2.08 19-2 (0.9-0.4) RUS Listed, Full featured UR2 121-1044 2 Wire Butt 2.08 19-2 (0.9-0.4) Dry, Full featured UY2-D 871-3758 Trim Out 2.08 19-2 (0.7-0.4) Replace defective connector without cutting service 211 871-37 100 Per Pack Type Order Code 1+ 25+ 50+ 2/3 Wire Butt 871-393 58.72 52.44 47.43 Run / Tap Splice 483-2528 48.09 44.7 38.07 Run / Tap Splice 871-3707 1.34 13.12 11.5 2/3 Wire Butt 871-3723 10.32 8.7 7.91 2 Wire Butt 143-075 1.40 55.20 4.83 2 Wire Butt 871-3740 5.4 58.49 52.89 Order Multiple = 10 10+ 100+ 500+ In - Line 871-377 3.1 3.22 2.90 In - Line 121-3188 4.00 3.58 3.22 Order Multiple = 100 100+ 500+ 1K+ 2/3 Wire Butt 871-3731 0.12 0.10 0.09 2 Wire Butt 871-3758 0.12 0.10 0.09 38510 Max Operating Insulation Wire Size Temp. Type O.D. mm AWG (mm 2 ) Special Features C List No.Order Code Butt 3.94 14-22 (1.5-0.5) Moisture resistant seal 140 314 871-351 Butt 3.05 1-22 (1.5-0.5) Dual element connection 140 557 871-3570 Run/Tap Splice 3.05 1-22 (1.5-0.5) Flame retardant 140 558 871-3588 Run/Tap Splice 3.8 1-18 (1.5-0.75) Flame retardant 140 50 871-359 Run/Tap Splice 3.8 1-18 (1.-1) Run and Tap 90 50B 143-077 Run/Tap Splice 4.82 10-12 (4.0-3.0) Run and Tap 140 52 871-300 Run/Tap Splice 3.8 10-18 (4.0-0.75) Dual element connection 140 57 871-318 Run/Tap Splice 3.8 1-18 (1.5-0.75) Moisture resistant seal 140 804 871-32 Run/Tap Splice 2.79 14-22 (1.5-0.5) Low voltage 140 905 871-334 Tap 3.81 18-22 (1.0-0.5) Mates with.35mm male tab 140 951 871-342 Tap 3.81 12 (3.0) Mates with.35mm male tab 140 953 871-350 Fuse 3.81 14-18 (1.5-0.75) Blade fuse holder 140 972 871-39 Type Qty Per Pack Order Code 1+ 25+ 50+ Butt 100 871-351 108.23 9.71 87.4 Butt 100 871-3570 8.5 1.29 55.47 Run / Tap Splice 100 871-3588 84.99 75.94 8.5 Run / Tap Splice 100 871-359 77.31 9.07 2.4 Run / Tap Splice 10 143-077 5.34 4.2 3.42 Run / Tap Splice 100 871-300 97.78 87.3 79.00 Run / Tap Splice 100 871-318 100.71 90.00 81.38 Run / Tap Splice 100 871-32 4.77 41.79 37.7 Run / Tap Splice 100 871-334 73.73 5.91 59.0 Tap 100 871-342 74.44.50 0.12 Pack Order Code 10+ 100+ 500+ Tap 1 871-350 1.14 1.11 1.04 Fuse 1 871-39 2.12 1.89 1.73 Tap, Blade and Fuse Splices Tap splice In-line fuseholder Blade splice 38497 DAVICO The tap splice is placed over the existing wire, the additional wire inserted and the block crimped with pliers. The blade splice is crimped over the wire as above. A.3mm push-on blade can then be inserted into the female blade socket. Suitable for splicing or as a break-in test lead. The in-line fuseholder is placed over the existing wires and crimped. Automotive fuses can then be plugged in. Compliant Non-compliant Limited stock - RoHS replacement available RoHS Sales Tel: (5) 788 0200 300,000 products, stocked and ready to despatch 29

Farnell Page 270 Date: 17-08-0 time:21:42 270 Max Dimensions(mm) Insul Wire Size (mm) L Description O.D. mm mm 2 AWG List No. Order Code Red, tap splice 3.8 0.8-2.0 22-18 22 20 13.2 DS1. 40-424 Red, tap splice 3.8 0.8-2.0 22-18 22 20 13.2 DS1 997-2323 Blue, tap splice 3.8 1.0-1.5 1-14 24 20 13.2 DS2. 40-43 Blue, tap splice 3.8 1.0-1.5 1-14 24 20 13.2 DS2 997-2331 Blade splice 3.8 1.0-2.0 1-14 38 9.5 19 DS2/M. 40-448 Blade splice 3.8 1.0-2.0 1-14 38 9.5 19 DS2/M 997-2340 In-line fuseholder 3.8 1.0-2.0 1-14 31 17.5 24 DS2/FT. 40-450 In-line fuseholder - - DS2/FT 110-2031 219857 25 Per Pack Order Code 1+ 10+ 25+ 50+ Red. tap splice 40-424 9.54 8.44 7.22 5.97 Red. tap splice 997-2323 9.54 8.44 7.22 5.97 Blue. tap splice 40-43 9.4 8.52 7.29.03 Blue. tap splice 997-2331 9.54 8.44 7.22 5.97 Blade splice 40-448 9.4 8.52 7.29.03 Blade splice 997-2340 9.54 8.44 7.22 5.97 In-Line fuseholder 40-450 29.41 2.03 22.25 18.43 In-Line fuseholder 110-2031 32.09 28.42 25.29 20.93 Electrotap Splice Ì Cost efficient method of connecting branch lines with solid or stranded wire 0.5mm-0.mm Ì Insulation displacement Ì Double lock when closed Ì Can be used with any general purpose pliers Conductor Insulation Size Diameter Order Code 0,5-0,75mm 2 4mm 357-3722 1,0-2,5mm 2 4mm 357-3795 4,0-,00mm 2 5mm 357-3801 239022 List No. Order Code 10+ 50+ 100+ 500+ 735410 357-3722 0.34 0.32 0.31 0.27 735398 357-3795 0.50 0.47 0.41 0.33 735411 357-3801 0.72 0.8 0.5 0.59 Splice Terminals PCB Terminal PCB Hole Dia 1.3mm Tab Size 2.8mm x 0.8mm Material Brass, bright tin plated Temp 85 C Fast access to over 300,000 products Over 125,000 technical datasheets Technical attribute search Quick buy facility Instant order confirmation www.farnell-newarkinone.com.sg Order Code 100+ 500+ 1K+ 5K+ Vertical Tab 347-2528 0.04 0.04 0.03 0.03 22721 In stock and ready to despatch, 300,000 products in our Asia, US and Europe warehouses. 270 1,000s more products available at www.farnell-newarkinone.com.sg Prices are in Singapore Dollars and exclusive of GST. Due to the volatile nature of certain products, prices are subject to change without notice.