Photometric and Electrical Measurement and Test Report for LED Hong Kong Ltd. No.24, Walok Industrial Building, SanMei Street, FoTan New Territory Hong Kong Oct 17, 212 Product Name: 1.2M,2 24W LED Corrosion proof Model No: R224LEDCP-1 Test Engineer: David Zhang Report No.: BTR66.181.12.164.6 Sample Received Date: Oct 11, 212 Test Performed Date: Oct 11, 212 to Oct 12, 212 Reviewed By: Prepared By: Steven Hsu BEST Test Service Shenzhen Co., Ltd. 1st Floor, 1st Building, Weitai Industrial Park, Yingrenshi, Shiyan, Baoan, Shenzhen, China TEL: +86-755-282366 FAX: +86-755-2346787-811 Email: certification@bestcert.cn Note: The test report only allows to be revised within the retention period unless further standard or the requirement was noticed. This report is for the exclusive use of BEST s Client and is provided pursuant to the agreement between BEST and its Client. BEST s responsibility and Liability are limited to the terms and conditions of the agreement. BEST assumes no liability to any party, other than to the Client in accordance with the agreement, for any loss, expense or damage occasioned by the use of this report. Only the Client is authorized to permit copying or distribution of this report and then only in its entirety. Any use of the BEST name or one of its marks for the sale or advertisement of the tested material, product or service must first be approved in writing by BEST. The observations and test results in this report are relevant only to the sample tested. This report by itself does not cover that the material, product, of service is or has ever been under a BEST certification program. National Voluntary Laboratory Accreditation Program (NVLAP) has accredited this laboratory under ISO1725: 25 for specific laboratory activities as listed in the NVLAP directory of accredited laboratories. The results shown in this report were determined by this laboratory in accordance with its terms of accreditation.
LED Hong Kong Ltd. Model: R224LEDCP-1 TABLE OF CONTENTS 1 - GENERAL INFORMATION... 3 1.1 PRODUCT DESCRIPTION FOR EQUIPMENT UNDER TEST (EUT)... 3 1.2 OBJECTIVE... 3 1.3 TEST FACILITY DESCRIPTION... 4 1.4 TEST EQUIPMENT LIST... 4 2 - TEST METHOD... 5 3 SUMMARY OF TEST RESULT... 6 4 SPECTRAL FLUX PLOTS... 7 5 EUT PHOTOS... 8 6 LUMINOUS INTENSITY DISTRIBUTION TEST PLOTS (CIE CHROMATICITY)... 9 Report No.BTR66.181.12.164.6 Page 2 of 9 Photometric and Electrical Test Report
LED Hong Kong Ltd. Model: R224LEDCP-1 1 - GENERAL INFORMATION 1.1 Product Description for Equipment under Test (EUT) Applicant : LED Hong Kong Ltd. Product Name : 1.2M,2 24W LED Corrosion proof Model No : R224LEDCP-1 Brand Name : ROBUS Nominal Operation Voltage : AC 24V/5Hz Nominal Power : 48W Nominal CCT : 55K Nominal CRI : 69.8 Nominal Lumen Output : 48.1 Lumens Nominal Life Time : 2 Hours Number of hours operated prior to measurement for new sample : Hours Stabilization Time : 1.5 Hours Total operating time for measurement include stabilization time : 3.5 Hours Date of Receiving Sample : Oct 11, 212 Measurement quantities measured : 1 pcs Orientation During Testing : Horizontal Test Requested : 1. Electrical and Photometric Test; 2. Luminous Intensity Distribution Test. (Note: The reports of BTR66.181.12.164.6 &BTR66.181.12.164.6-1 share the same test data) 1.2 Objective The following test report is prepared on behalf of LED Hong Kong Ltd. use the following American National Standards or illumination Engineering Society of North America test guides: ANSI C78.377-28: Specifications for the Chromaticity of Solid State Lighting Products; ANSI C79.1 22: American National Standard for Electric Lamps Nomenclature for Glass Bulbs Intended for Use with Electric Lamps; ANSI C78.2 23: American National Standard for Electric Lamps A, G, PS, and Similar Shapes with E26 Medium Screw Bases; ANSI C78.21 23: American National Standard for Electric Lamps PAR and R Shapes; ANSI C78.24 21: American National Standard for Electric Lamps Two-inch (51 mm); Integral-reflector Lamps with Front Covers and GU5.3 or GX 5.3 Bases; ANSI/IEC C81.61-23: American National Standard for Electric Lamp Bases; ANSI/IEEE C62.41 1991 (1-May-1991): Surge Voltages in Low-Voltage AC Power Circuits, Recommended Practice for; CIE Publication No. 13.3 1995: Method of Measuring and Specifying Color Rendering of Light Sources; CIE Publication No. 18.2 1983: The Basis of Physical Photometry; IESNA LM-16-1993: Practical Guide to Colorimetry of Light Sources; IESNA LM-28-89 1989: Guide for the Selection, Care, and Use of Electrical Instruments in the Photometric Laboratory; IESNA LM-79-8 Electrical and Photometric Measurement of Solid State Lighting Products UL 1993 1999: Standard for Self-Ballasted Lamps and Lamp Adapters; UL 875 29: Light Emitting Diode (LED) Equipment for Use in Lighting Products. Report No.BTR66.181.12.164.6 Page 3 of 9 Photometric and Electrical Test Report
LED Hong Kong Ltd. Model: R224LEDCP-1 1.3 Test Facility Description The Energy Efficiency Lab used by BEST to collect energy efficiency measurement data is located in 1st Floor, 1st Building, Weitai Industrial Park, Yingrenshi, Shiyan, Baoan, Shenzhen, China. BEST Test Service Shenzhen Co., Ltd is a National Institute of Standards and Technology (NIST) accredited laboratory, under the National Voluntary Laboratory Accredited Program (Lab Code 277-). BEST Test Service Shenzhen Co., Ltd is also an ELI accredited lab for lighting products (ELI Certificate No. ELI-L4-21) and UL accredited lab for lighting products 1.4 Test Equipment List Device Manufacture Model No Serial No Cal. Date Cal Due Date Integral Sphere Integral Sphere Everfine Everfine 1.5M SPEKTRON 1.5M SPEKTRON 684T Oct 2, 211 Oct 2, 212 9625 Oct 2, 211 Oct 2, 212 Integral Sphere Labsphere LMS-65 6112416 Mar 1, 212 Mar 9, 213 Spectro Meter Assy Labsphere CDS 21 21711416 Mar 1, 212 Mar 9, 213 Plus UV-VIS-Near IR Spectrophotometer Colorimeter Plus UV-VIS-Near IR Spectrophotometer Colorimeter Everfine Everfine PMS-8-V1 (38nm-8nm) PMS-7 (2nm-8nm) 6833 Oct 2, 211 Oct 2, 212 981 Oct 2, 211 Oct 2, 212 Goniophotometer Everfine GOR-5 191 Nov 2, 211 Nov 19, 212 6 1/2 Digital Multimeter Agilent 3441A MY472386 Oct 18, 211 Oct 17, 212 AC Power Source AC Power Source California Instrument California Instrument 151I S1393 N/A N/A 151L L3572 N/A N/A Standard Light Source OSRAM 24V/5W NO.1 Sep 17, 212 Sep 16, 213 Standard Light Source OSRAM 24V/5W NO.2 Sep 17, 212 Sep 16, 213 Multi-Function AC standard Meter Everfine PF21S 651 Oct 18, 211 Oct 17, 212 Digital Power Meter Everfine PF9811 9229 Oct 18, 211 Oct 17, 212 Digital Power Meter YOKOGAWA WT21 91K319 Oct 18, 211 Oct 17, 212 Digital Power Meter YOKOGAWA WT21 91K3117 Oct 18, 211 Oct 17, 212 Digital Power Meter YOKOGAWA WT21 91K3116 Oct 18, 211 Oct 17, 212 Ballast Parameter Analyzer Everfine PF9821 955 Oct 18, 211 Oct 17, 212 Second Meter TIANFU PC 396 N/A Oct 18, 211 Oct 17, 212 Digital Storage Tektronix TDS212B C51911 Oct 18, 211 Oct 17, 212 Oscilloscope Statement of Traceability: BEST Test Service Shenzhen Co., Ltd. certifies that all calibration has been performed using suitable standards traceable to the NIM China. Report No.BTR66.181.12.164.6 Page 4 of 9 Photometric and Electrical Test Report
LED Hong Kong Ltd. Model: R224LEDCP-1 2 - Test Method 2.1 Photometric and Electrical Measurement (Integrated Sphere Method) Total light output (luminous flux) for the 25 ±1 ambient temperature conditions is measured using a 1.6m integrating sphere. Temperature is measured at a position inside the sphere. Spectral radiant flux measurements are made using Labsphere LMS-65 to the detector port of the integrating sphere. Each lamp is operated at rated voltage in its designated orientation. Each lamp should be stable before measurements are made. The determining method of stable is as follows: Step 1 Take 3 measurements of the lamp light output at 15 minute interval (total time=3mintues.)this time period is in addition to the recommended pre-burning time. Step 2 Calculate the percent difference between the maximum measured value and the minimum measured value for the three consecutive measurements. Step 3 if the value calculated in Step 2 does not exceed.5 percent, the lamp is considered stable. Luminous flux, chromaticity coordinates, correlated color temperature and color rendering index for each lamp are calculated from the spectral radiant flux measurements taken at 2 nm intervals over the range 35 to 15 nm. The calibration of the sphere photometer-spectrometer system is traceable to the NIST USA. Lamp efficacy (lumens per watts) for each lamp model is computed based on the revised luminous flux result. Electrical measurements including voltage, current, power and power factor are measured using the YOKOGAWA WT21 digital power Meter. The total uncertainty of the light output measurements is estimated, at the 95% confidence level, not to exceed ±1.12% over the wavelength range 35-15 nm. 2.2 Photometric and Electrical Measurement (GonioPhotometer Method) Before each measurement, the method below should be used to determine the lamp is stable or not. Step 1 Take 3 measurements of the lamp intensity at 15 minute interval (total time=3mintues.)this time period is in addition to the recommended pre-burning time. Step 2 Calculate the percent difference between the maximum measured value and the minimum measured value for the three consecutive measurements. Step 3 if the value calculated in Step 2 does not exceed.5 percent, the lamp is considered stable. A Everfine GOR-5 Goniometer was used to measure the intensity (candelas) at each angle of distribution for each sample; the photometric distance is 2.436m. Ambient temperature was measured equal to the height of the sample mounted on the Goniometer equipment. Each sample was operated at input rated voltage in its designated orientation. Each sample was allowed to be stable before measurement was made. Electrical measurements including voltage, current, power and power factor were measured using the YOKOGAWA WT21 Power Analyzer. Some graphics were created with Photometric Plus software. Report No.BTR66.181.12.164.6 Page 5 of 9 Photometric and Electrical Test Report
LED Hong Kong Ltd. Model: R224LEDCP-1 3 Summary of Test Result Item Test Result Accreditation Required Fields Lumen Output (Lumens) Luminous Efficacy (lm/w) Correlated Color Temperature (CCT) 48.1 NVLAP/EPA 17.75 NVLAP/EPA 529.8 NVLAP/EPA Color Rendering Index CRI 69.8 NVLAP/EPA Input Power (W) 44.55 NVLAP/EPA Power Type AC DC / Input Voltage (V) Input Current (A) 24. NVLAP/EPA.21 NVLAP/EPA Power Factor.928 NVLAP/EPA Optional Fields x(cie 1931).3377 NVLAP/EPA y(cie 1931).3551 NVLAP/EPA u (CIE 1976).251 NVLAP/EPA v (CIE 1976).4853 NVLAP/EPA Duv(CIE 1976).44 NVLAP/EPA R9-14.8 NVLAP/EPA Report No.BTR66.181.12.164.6 Page 6 of 9 Photometric and Electrical Test Report
LED Hong Kong Ltd. Model: R224LEDCP-1 4 Spectral Flux Plots Report No.BTR66.181.12.164.6 Page 7 of 9 Photometric and Electrical Test Report
LED Hong Kong Ltd. Model: R224LEDCP-1 5 EUT Photos Report No.BTR66.181.12.164.6 Page 8 of 9 Photometric and Electrical Test Report
LED Hong Kong Ltd. Model: R224LEDCP-1 6 Luminous Intensity Distribution Test Plots (CIE Chromaticity) This page is blank and see next page. Report No.BTR66.181.12.164.6 Page 9 of 9 Photometric and Electrical Test Report
BEST TEST SERVICE SHENZHEN CO., LTD. Page 1 Of 16 LUMINAIRE PHOTOMETRIC TEST REPORT Test:U:24.V I:.21A P:44.55W PF:.9275 Lamp Flux:48.1x1 lm NAME: DIM.: MFR.: LED Hong Kong Ltd TYPE:R224LEDCP-1 SPEC.: SUR.: WEIGHT: SERIAL No.: PROTECTION ANGLE: DATA OF LAMP PHOTOMETRIC DATA Eff: 17.75 lm/w MODEL R224LEDCP-1 Imax(cd) 1354 S/MH(C/18) 1.27 NOMINAL POWER(W) 44 LOR(%) 1. S/MH(C9/27) 1.33 RATED VOLTAGE(V) 24 TOTAL FLUX(lm) 48.1 UP,DN(C-18) 3.,47.3 NOMINAL FLUX(lm) 48.1 CIE CLASS DIRECT UP,DN(C18-36) 2.9,46.8 LAMPS INSIDE 1 up(%) 5.9 CIBSE SHR NOM 1.5 TEST VOLTAGE(V) 24. down(%) 94.1 CIBSE SHR MAX 1.5 LUMINOUS INTENSITY DISTRIBUTION DIAGRAM S(m) PLANAR ISOLUX DIAGRAM(UNIT:lx) C(DEG) 9-15 -/+18 15 1 7 8-12 12 6 2 5-9 9 4 3 6-6 9 6 12 UNIT:cd C/18,18.2-3 15 3 C9/27,144.1 AVERAGE BEAM ANGLE(5%):126.2 DEG 3 1 2 11 94 8 67 54 3 MH=1m 4 13 67. 4. 13. C Range: - 36DEG Test Date:212-1-12 Range: - 18DEG Interval: 1.DEG Test System:EVERFINE GO-R5_V2 SYSTEM V2..265 Test Distance:2.435m [K=1.]
BEST TEST SERVICE SHENZHEN CO., LTD. Page 2 Of 16 ZONAL FLUX DIAGRAM AND LUMINANCE LIMITATION CURVES ZONAL FLUX DIAGRAM: C C45 C9 C135 C18 C225 C27 C315 zone total %lum,lamp 1 1323 1339 1348 1329 1311 1327 1345 1332-1 128. 128. 2.67,2.67 2 1258 1296 1311 1279 1236 1278 1314 1284 1-2 37.4 498.4 1.4,1.4 3 1143 126 1211 1188 1118 12 1218 1214 2-3 572.5 171 22.3,22.3 4 978.9 148 184 125 956.8 137 173 155 3-4 697.3 1768 36.8,36.8 5 768.6 872.6 961.7 843.5 757.3 85.9 93.1 856.4 4-5 734.3 253 52.1,52.1 6 538.2 77.2 858.8 672.2 528.4 667.6 823.1 661. 5-6 689.3 3192 66.5,66.5 7 299.3 588. 737.7 54.5 295.5 551.9 726.1 528.3 6-7 62.6 3795 79.1,79.1 8 93.24 418.6 453. 397.1 98.18 44.5 432.3 392.8 7-8 46.6 4255 88.6,88.6 9 24.93 199.2 255.4 187.2 25.82 195.5 25.2 184.8 8-9 262.7 4518 94.1,94.1 1 17.48 114. 165.1 13. 17.42 111. 161.2 13. 9-1 14.7 4658 97,97 11 9.124 52.51 87.79 47.48 8.838 48.16 83.68 44.17 1-11 74.57 4733 98.6,98.6 12 4.414 35.53 48.83 31.51 4.8 33.56 46.89 29.73 11-12 35.63 4769 99.3,99.3 13 2.142 14.56 31.46 12.56 2.73 15.28 3.1 12.61 12-13 19.6 4788 99.8,99.8 14 1.181 6.316 12.8 5.297 1.176 6.337 13.49 5.414 13-14 7.849 4796 99.9,99.9 15.9548 2.514 5.619 2.174.814 1.66 5.42 2.164 14-15 2.785 4799 1,1 16.9391 1.292 1.97 1.188.691.715 1.452.8325 15-16.8363 48 1,1 17.8865.9111.9251.8818.738.7197.6989.668 16-17.2632 48 1,1 18.8339.847.8717.8178.8369.8451.8433.8144 17-18.779 48 1,1 DEG LUMINOUS INTENSITY:cd UNIT:lm LUMINANCE LIMITATION CURVES GLARE CLASS ILLUMINANCE (lx) 1.15 A 2 1 5 <=3 1.5 B 2 1 5 <=3 1.85 C 2 1 5 <=3 2.2 D 2 1 5 <=3 2.55 E 2 1 5 <=3 a b c d e f g h a b c d e f g h G(DEG) 85 75 65 55 45 8 1 2 3 4 5 6 8 1 2 3 4 1 C/18 C9/27 LUMINANCE (cd/(m2)) 8 6 4 3 a/h 2 LUMINANCE cd/(m2) G(DEG) C/18 C9/27 85 4749 38651 8 5369 2685 75 7232 23247 7 875 21569 65 998 19297 6 1764 17176 55 1148 1577 5 11957 14961 45 12438 14499 C Range: - 36DEG Test Date:212-1-12 Range: - 18DEG Interval: 1.DEG Test System:EVERFINE GO-R5_V2 SYSTEM V2..265 Test Distance:2.435m [K=1.]
BEST TEST SERVICE SHENZHEN CO., LTD. Page 3 Of 16 CU AND LUMINAIRE BUDGETARY ESTIMATE DIAGRAM Test:U:24.V I:.21A P:44.55W PF:.9275 Lamp Flux:48.1x1 lm NAME: DIM.: MFR.: LED Hong Kong Ltd TYPE:R224LEDCP-1 SPEC.: SUR.: WEIGHT: SERIAL No.: PROTECTION ANGLE: cc w fc RCR. 1. 2. 3. 4. 5. 6. 7. 8. 9. 1. 8% 7% 5% 3% 5% 3% 1% 5% 3% 1% 5% 3% 1% 5% 3% 1% 2% 2% 2% 2% RCR:Room Cavity Ratio Coefficients of Utilization(CU) 1.18..86.75.66.59.53.48.43.4.37 1.18.95.78.66.56.49.43.38.34.31.28 1.18.9.72.59.49.42.36.32.28.26.23 1.14.97.83.73.64.57.51.46.42.39.36 1.14.92.76.64.55.48.42.38.34.31.28 1.14.88.7.58.49.42.36.32.28.25.23 1.8.91.79.69.61.54.49.44.4.37.34 1.8.88.73.62.53.46.41.37.33.3.27 1.8.84.68.56.47.41.35.31.28.25.22 1.2.86.74.65.58.52.47.42.39.36.33 1.2 1.2.83.81.7.65.59.54.51.46.45.4.4.34.36.3.32.27.29.24.27.22 1% 5% 3% 1% 2%.97.97.97.82.79.77.71.67.63.62.57.53.55.49.45.49.43.39.44.38.34.4.34.3.37.31.27.34.28.24.32.26.22.94.74.6.5.42.36.31.28.25.22.2 LAMPS 5 LUMINAIRE BUDGETARY DIAGRAM 4 3 2 1 9 8 7 6 5 4 6 H=7 H=7 CONDITIONS FLUX 5lm FACTOR.7 Hdown.m Hwork.m Ework(AVE) 1lx cc w fc 3 7 5 3 6 5 5 3 2 4 5 4 2 1 2 3 4 5 7 1 2 3 5 7 1k 2k 3k 4k 5k 7k AREA(m2) C Range: - 36DEG Test Date:212-1-12 Range: - 18DEG Interval: 1.DEG Test System:EVERFINE GO-R5_V2 SYSTEM V2..265 Test Distance:2.435m [K=1.]
BEST TEST SERVICE SHENZHEN CO., LTD. Page 4 Of 16 WEC AND CCEC Test:U:24.V I:.21A P:44.55W PF:.9275 Lamp Flux:48.1x1 lm NAME: DIM.: MFR.: LED Hong Kong Ltd TYPE:R224LEDCP-1 SPEC.: SUR.: WEIGHT: SERIAL No.: PROTECTION ANGLE: cc 8% 7% 5% 3% 1% w 5% 3% 1% 5% 3% 1% 5% 3% 1% 5% 3% 1% 5% 3% 1% fc 2% 2% 2% 2% 2% RCR RCR:Room Cavity Ratio Wall Exitance Coeffcients(WEC). 1..363.26.65.354.22.64.337.193.62.322.186.6.37.178.57 2..323.177.54.315.174.54.3.167.52.286.161.5.273.155.49 3..291.155.46.284.152.46.27.147.45.258.141.43.246.136.42 4..264.137.4.258.135.4.245.13.39.234.126.38.224.122.37 5..241.123.36.235.121.35.225.117.34.214.113.34.25.11.33 6..222.111.32.217.19.31.27.16.31.198.13.3.189.1.3 7..25.11.29.2.1.28.192.97.28.183.94.27.176.91.27 8..19.93.26.186.92.26.178.89.25.171.87.25.164.84.24 9..178.86.24.174.85.24.167.82.23.16.8.23.153.78.23 1..167.8.22.163.79.22.157.77.22.15.75.21.144.73.21 cc w fc RCR. 1. 2. 3. 4. 5. 6. 7. 8. 9. 1. 8% 7% 5% 3% 1% 5% 3% 1% 5% 3% 1% 5% 3% 1% 5% 3% 1% 5% 3% 1% 2% 2% 2% 2% 2% RCR:Room Cavity Ratio Ceiling Cavity Exitance Coefficients(CCEC).235.229.222.214.26.199.191.184.177.171.165.235.21.177.16.147.137.129.122.116.111.17.235.175.14.117.12.92.84.79.75.71.69.21.196.19.184.177.171.164.158.153.147.142.21.172.153.138.127.119.112.16.11.97.93.21.151.121.11.89.8.73.69.65.62.6.137.134.13.126.122.118.113.19.16.12.99.137.119.16.96.89.83.78.74.71.68.66.137.79.14.77.84.75.71.73.62.7.56.68.52.66.49.64.46.61.44.59.43.58.79.79.69.61.61.49.56.42.52.37.49.33.46.31.44.29.42.27.4.26.39.25.25.25.25.22.24.2.23.18.23.17.22.16.21.15.21.14.2.14.19.13.19.13.25.2.16.14.12.11.1.1.9.9.8 C Range: - 36DEG Test Date:212-1-12 Range: - 18DEG Interval: 1.DEG Test System:EVERFINE GO-R5_V2 SYSTEM V2..265 Test Distance:2.435m [K=1.]
BEST TEST SERVICE SHENZHEN CO., LTD. Page 5 Of 16 Uncorrected UGR Table Test:U:24.V I:.21A P:44.55W PF:.9275 Lamp Flux:48.1x1 lm NAME: DIM.: MFR.: LED Hong Kong Ltd TYPE:R224LEDCP-1 SPEC.: SUR.: WEIGHT: SERIAL No.: PROTECTION ANGLE: ceiling/cavity.7.7.5.5.3.7.7.5.5.3 walls.5.3.5.3.3.5.3.5.3.3 working plane.2.2.2.2.2.2.2.2.2.2 Room dimensions Viewed crosswise Viewed endwise x = 2H y = 2H 3H 4H 6H 8H 12H 2.7 21.9 22.4 22.7 22.8 22.8 22.2 23.3 23.8 24. 24. 24. 21. 22.3 22.8 23.2 23.2 23.3 22.5 23.7 24.1 24.4 24.4 24.4 22.8 24.1 24.5 24.8 24.8 24.9 22.6 25.2 26.5 27.5 28. 28.6 24.1 26.6 27.8 28.8 29.3 29.7 22.9 25.6 26.9 28. 28.5 29. 24.4 27. 28.2 29.2 29.6 3.2 24.7 27.3 28.5 29.6 3.1 3.6 4H 2H 3H 4H 6H 8H 12H 21.7 23.1 22.1 23.4 23.8 23.1 24.5 23.5 24.8 25.2 23.3 24.5 23.8 24.9 25.3 26.1 27.3 26.5 27.7 28.1 24. 25.1 24.5 25.5 26. 27.5 28.6 28. 29. 29.5 24.5 25.5 25. 25.9 26.4 28.8 29.7 29.3 3.2 3.7 24.7 25.6 25.2 26. 26.6 29.4 3.3 29.9 3.8 31.3 24.8 25.6 25.3 26.1 26.7 3. 3.9 3.5 31.3 31.9 8H 4H 6H 8H 12H 25.1 26. 25.6 26.5 27. 27.9 28.8 28.4 29.3 29.8 26. 26.7 26.5 27.2 27.8 29.4 3.2 29.9 3.7 31.2 26.3 27. 26.9 27.5 28.1 3.2 3.9 3.7 31.4 32. 26.6 27.2 27.2 27.8 28.4 31. 31.6 31.6 32.2 32.8 12H 4H 6H 8H 25.3 26.4 27. 26.2 27.1 27.5 25.9 27. 27.5 26.7 27.6 28.1 27.2 28.2 28.7 27.9 29.5 3.4 28.7 3.2 31. 28.4 3.1 3.9 29.2 3.7 31.5 29.8 31.3 32.1 Variations with the observer position at spacings: S = 1.H +.1 / -.2 +.1 / -.1 1.5H +.2 / -.3 +.2 / -.3 2.H +.1 / -.3 +.2 / -.3 CIE Pub.117 Corrected 48 lm Total Lamp Luminous Flux.(8log(F/F) = 5.5) C Range: - 36DEG Test Date:212-1-12 Range: - 18DEG Interval: 1.DEG Test System:EVERFINE GO-R5_V2 SYSTEM V2..265 Test Distance:2.435m [K=1.]
BEST TEST SERVICE SHENZHEN CO., LTD. Page 6 Of 16 UTILIZATION FACTORS TABLE Test:U:24.V I:.21A P:44.55W PF:.9275 Lamp Flux:48.1x1 lm NAME: DIM.: MFR.: LED Hong Kong Ltd TYPE:R224LEDCP-1 SPEC.: SUR.: WEIGHT: SERIAL No.: PROTECTION ANGLE: REFLECTANCE Ceiling.8.8.8.7.7.7.5.5.5 Walls.7.5.3.7.5.3.7.5.3 Working plane.2.2.2.2.2.2.2.2.2 ROOM INDEX UTILIZATION FACTORS(PERCENT) k(ri) x RCR = 5 k =.6 53 41 34 52 41 34 51 4 33 27.8 62 5 42 61 5 42 59 49 42 34 1. 7 58 5 69 58 5 66 59 49 41 1.25 77 66 58 76 65 57 72 63 56 48 1.5 82 71 63 8 7 63 77 68 61 53 2. 9 79 72 87 78 71 83 75 69 6 2.5 94 85 77 91 83 76 87 8 74 64 3. 97 89 82 95 87 81 9 84 78 68 4. 12 95 89 99 93 87 94 89 84 73 5. 15 99 93 12 96 91 96 92 88 77 ROOM INDEX UF(total) Direct According to DIN EN 1332-2 24 Suspended SHRNOM = 1.25 C Range: - 36DEG Test Date:212-1-12 Range: - 18DEG Interval: 1.DEG Test System:EVERFINE GO-R5_V2 SYSTEM V2..265 Test Distance:2.435m [K=1.]
BEST TEST SERVICE SHENZHEN CO., LTD. Page 7 Of 16 ISOCANDELA DIAGRAM Test:U:24.V I:.21A P:44.55W PF:.9275 Lamp Flux:48.1x1 lm NAME: DIM.: MFR.: LED Hong Kong Ltd TYPE:R224LEDCP-1 SPEC.: SUR.: WEIGHT: SERIAL No.: PROTECTION ANGLE: VERTICAL(DEG) 9 8 7 6 5 4 3 2 1-1 -2-3 -4-5 -6 1% 135.4 2% 27.8 3% 46.2 4% 541.5 5% 676.9 6% 812.3 7% 947.7 8% 183 9% 1218-7 -8-9 -9-8 -7-6 -5-4 -3-2 -1 1 2 3 4 5 6 7 8 9 Imax:1354(H.5,V4.) (At:C=292.5,Gamma=4.) UNIT: cd HORIZONTAL(DEG) C Range: - 36DEG Test Date:212-1-12 Range: - 18DEG Interval: 1.DEG Test System:EVERFINE GO-R5_V2 SYSTEM V2..265 Test Distance:2.435m [K=1.]
BEST TEST SERVICE SHENZHEN CO., LTD. Page 8 Of 16 AAI Figure Test:U:24.V I:.21A P:44.55W PF:.9275 Lamp Flux:48.1x1 lm NAME: DIM.: MFR.: LED Hong Kong Ltd TYPE:R224LEDCP-1 SPEC.: SUR.: WEIGHT: SERIAL No.: PROTECTION ANGLE: Flux out:2857 lm 3.281ft 1m 41.42,125.5fc 445.9,1351lx 9.38ft 275.48cm 6.562ft 2m 1.36,31.37fc 111.5,337.7lx 18.8ft 55.96cm 9.843ft 3m 4.63,13.94fc 49.54,15.1lx 27.11ft 826.44cm 13.12ft 4m 2.589,7.843fc 27.87,84.43lx 36.15ft 111.92cm 16.4ft 5m 1.657,5.2fc 17.83,54.3lx 45.19ft 1377.39cm Height Eavg,Emax Angle:18.4deg Diameter Note:The Curves indicate the illuminated area and the average illumination when the luminaire is at different distance. C Range: - 36DEG Test Date:212-1-12 Range: - 18DEG Interval: 1.DEG Test System:EVERFINE GO-R5_V2 SYSTEM V2..265 Test Distance:2.435m [K=1.]
BEST TEST SERVICE SHENZHEN CO., LTD. Page 9 Of 16 ISOLUX DIAGRAM Test:U:24.V I:.21A P:44.55W PF:.9275 Lamp Flux:48.1x1 lm NAME: DIM.: MFR.: LED Hong Kong Ltd TYPE:R224LEDCP-1 SPEC.: SUR.: WEIGHT: SERIAL No.: PROTECTION ANGLE: 65.3' 32.6'.' 32.6' 65.3' 81.6' 24.88m 65.3' 19.9m 49.' 14.93m 3%.446lx.3759fc 5%.6743lx.6265fc 1% 1.349lx.1253fc 3% 4.46lx.3759fc 5% 6.743lx.6265fc 32.6' 9.95m 16.3' 4.98m.'.m 16.3' 4.98m 32.6' 9.95m 49.' 14.93m 65.3' 19.9m 81.6' 24.88m 19.9m 9.95m.m 9.95m 19.9m MOUNTING HEIGHT: 33'(1.m) C Range: - 36DEG Test Date:212-1-12 Range: - 18DEG Interval: 1.DEG Test System:EVERFINE GO-R5_V2 SYSTEM V2..265 Test Distance:2.435m [K=1.]
BEST TEST SERVICE SHENZHEN CO., LTD. Page 1 Of 16 Average Luminance Table(CIBSE) Test:U:24.V I:.21A P:44.55W PF:.9275 Lamp Flux:48.1x1 lm NAME: DIM.: MFR.: LED Hong Kong Ltd TYPE:R224LEDCP-1 SPEC.: SUR.: WEIGHT: SERIAL No.: PROTECTION ANGLE: Parameter description for average Luminance Symbol Value Unit Luminance in Azimuth Plane Bc refer Table 2 cd/sq.m. Intensity at angle Gamma in given azimuth plane I from data cd/klm Number of lamps N 1 Output of each lamp(initial lumens as specified) F 48.1 lm Multiplying factor K 1 Luminous area in horizontal plane used in calculations A.1 sq.m. Angle to the downward vertical from light centre Gamma from data deg Table 1. Calculation parameters for determination of CIBSE LG3:1996 Average Luminance G C plane(deg) deg 1 2 3 4 5 6 7 8 9 1 11 12 13 14 15 16 17 18 55 1148117871221112678131911381445514997153215425152261481714281355128612328118611145911255 6 1764113115141225913183142231527161281664216819165381593215211394812878119241117617311568 65 998 162172121313681154217151826118951191571881218516711511113379117181459 9873 9727 7 875 943 113122751495917511958529852145221421245261119171171331462111963 9877 891 8639 75 7232 8244 1257137981783227582222229112356228812291722639217982228173513581111 885 7256 8 5369 799 1128316152121424332523425492555525492254922528225252459296316511114 7475 5654 85 4749 1881683623245292283343235793747379243814537732367343552633497294452348416582 9346 564 Table 2. Average Luminance(cd/sq.m.) for defined C plane,gamma angle CIBSE Gamma Average Luminance Patch Luminance Category (deg) maximum calculated specified maximum maximum measured specified maximum Category 1 Category 2 Category 3 55 to 9 65 to 9 75 to 9 38145 38145 38145 2 2 2 --- --- --- 5 5 5 Table 3. Tabulation of Average and Patch Luminance(cd/sq.m.) for defined CIBSE categories No match C Range: - 36DEG Test Date:212-1-12 Range: - 18DEG Interval: 1.DEG Test System:EVERFINE GO-R5_V2 SYSTEM V2..265 Test Distance:2.435m [K=1.]
BEST TEST SERVICE SHENZHEN CO., LTD. Page 11 Of 16 Average Luminance Table(CIBSE) Test:U:24.V I:.21A P:44.55W PF:.9275 Lamp Flux:48.1x1 lm NAME: DIM.: MFR.: LED Hong Kong Ltd TYPE:R224LEDCP-1 SPEC.: SUR.: WEIGHT: SERIAL No.: PROTECTION ANGLE: Parameter description for average Luminance Symbol Value Unit Luminance in Azimuth Plane Bc refer Table 2 cd/sq.m. Intensity at angle Gamma in given azimuth plane I from data cd/klm Number of lamps N 1 Output of each lamp(initial lumens as specified) F 48.1 lm Multiplying factor K 1 Luminous area in horizontal plane used in calculations A.1 sq.m. Angle to the downward vertical from light centre Gamma from data deg Table 1. Calculation parameters for determination of CIBSE LG3:21 Average Luminance G C plane(deg) deg 1 2 3 4 5 6 7 8 9 1 11 12 13 14 15 16 17 18 55 1148117871221112678131911381445514997153215425152261481714281355128612328118611145911255 6 1764113115141225913183142231527161281664216819165381593215211394812878119241117617311568 65 998 162172121313681154217151826118951191571881218516711511113379117181459 9873 9727 7 875 943 113122751495917511958529852145221421245261119171171331462111963 9877 891 8639 75 7232 8244 1257137981783227582222229112356228812291722639217982228173513581111 885 7256 8 5369 799 1128316152121424332523425492555525492254922528225252459296316511114 7475 5654 85 4749 1881683623245292283343235793747379243814537732367343552633497294452348416582 9346 564 Table 2. Average Luminance(cd/sq.m.) for defined C plane,gamma angle range (deg) 55 to 9 65 to 9 Average Luminance(cd/sq.m) Maximum Maximum limit for screen type & software category used measured Type I,II screen Type I,II screen Type III screen Type III screen Some neg.s'ware Only pos.s'ware Some neg.s'ware Only pos.s'ware 38145 1 15 2 5 38145 1 15 2 5 Table 3. Tabulation of average luminance(cd/sq.m.) and luminance limits No match C Range: - 36DEG Test Date:212-1-12 Range: - 18DEG Interval: 1.DEG Test System:EVERFINE GO-R5_V2 SYSTEM V2..265 Test Distance:2.435m [K=1.]
BEST TEST SERVICE SHENZHEN CO., LTD. Page 12 Of 16 Planar Illuminance Curve 13.5 E(lx) 15 Planar Illuminance Curve MH = 1 m C/18 C9/27 12 1.5 9 7.5 6 4.5 3 1.5-25 -2-15 -1-5 5 1 15 2 25 Distance(m) C Range: - 36DEG Test Date:212-1-12 Range: - 18DEG Interval: 1.DEG Test System:EVERFINE GO-R5_V2 SYSTEM V2..265 Test Distance:2.435m [K=1.]
BEST TEST SERVICE SHENZHEN CO., LTD. Page 13 Of 16 LUMINOUS DISTRIBUTION INTENSITY DATA Test:U:24.V I:.21A P:44.55W PF:.9275 Lamp Flux:48.1x1 lm NAME: DIM.: MFR.: LED Hong Kong Ltd TYPE:R224LEDCP-1 SPEC.: SUR.: WEIGHT: SERIAL No.: PROTECTION ANGLE: Table--1 C(DEG) (DEG) 5 1338 1 1323 15 1297 2 1258 25 127 3 1143 35 167 4 979 45 88 5 769 55 654 6 538 65 419 7 299 75 187 8 93.2 85 41.4 9 24.9 95 21.5 1 17.5 15 12.9 11 9.12 115 6.37 12 4.41 125 3.5 13 2.14 135 1.53 14 1.18 145.99 15.95 155.94 16.94 165.92 17.89 175.89 18.83 23 1351 1334 133 1281 1226 1168 112 121 934 824 71 585 468 379 36 237 181 111 69.8 44.2 31.3 24.2 15.5 9.59 6.14 3.8 2.47 1.78 1.4 1.14 1.2.97.93.9.89.84 45 1351 1339 1319 1296 1251 126 1139 148 96 873 788 77 64 588 529 419 289 199 15 114 76.2 52.5 44.2 35.5 23.3 14.6 9.68 6.32 3.99 2.51 1.75 1.29 1.3.91.9.84 68 134 1344 135 133 132 127 1218 1144 174 111 944 875 82 782 721 599 449 327 244 195 155 115 79. 55.1 48.1 4.1 27.1 17.2 11.5 7.65 4.75 2.8 1.81 1.22.95.9.83 9 1348 1333 1311 1269 1211 1145 184 125 962 91 859 816 738 62 453 337 255 27 165 125 87.8 59.3 48.8 43.2 31.5 19.9 12.8 8.97 5.62 3.35 1.97 1.29.93.86.87 113 1342 1345 1323 1291 126 128 113 156 99 923 852 795 749 691 585 445 32 236 188 149 111 74.3 53.3 46.4 38.3 25.6 16.4 1.9 7.6 4.4 2.67 1.74 1.16.92.89.81 135 1348 1329 1311 1279 123 1188 1113 125 934 844 755 672 62 541 48 397 281 187 138 13 68.5 47.5 4.8 31.5 2.5 12.6 8.5 5.3 3.35 2.17 1.59 1.19.97.88.88.82 158 1346 1327 1288 1256 1211 1139 171 99 92 799 681 555 44 338 269 21 146 95.2 57.3 35.7 26.3 18.6 11.5 7.21 4.41 2.73 1.85 1.41 1.15 1.4.96.91.9.88.88.79 18 1332 1311 128 1236 1185 1118 142 957 861 757 646 528 411 295 188 98.2 44.1 25.8 21.6 17.4 12.7 8.84 5.98 4.1 2.81 2.7 1.55 1.18.93.81.73.69.7.74.8.84 23 1344 133 129 126 129 1145 184 19 927 814 694 577 463 363 289 223 177 19 73.2 45.6 29.6 23.9 16.4 1.2 6.47 3.98 2.35 1.48 1.1.83.73.69.7.74.8.84 225 135 1327 139 1278 124 12 1127 137 944 851 754 668 64 552 51 44 276 196 15 111 72.3 48.2 4.6 33.6 23.8 15.3 9.8 6.34 3.46 1.66.86.71.69.72.79.85 248 134 135 1342 1318 1298 1271 1213 1141 157 984 95 833 778 75 71 579 43 315 238 192 15 19 74.4 5.1 44.7 37.1 26.6 17.2 11.4 7.47 4.5 1.93.91.72.71.78.84 27 135 1345 1327 1314 1277 1218 1149 173 13 93 869 823 84 726 583 432 328 25 24 161 121 83.7 55.5 46.9 4.5 3.1 19.9 13.5 8.96 5.42 2.88 1.45.76.7.78.84 293 1353 1345 132 131 1279 1223 1151 166 987 97 833 775 741 7 581 431 313 235 19 147 16 7.7 49. 44.2 35.7 25.1 16.3 1.9 7.45 4.53 2.59 1.42.74.67.73.86 315 1353 1332 1321 1284 1247 1214 1143 155 96 856 757 661 591 528 489 393 265 185 141 13 64.9 44.2 37.9 29.7 19.5 12.6 8.21 5.41 3.46 2.16 1.42.83.7.67.74.81 UNIT: cd 338 1344 1339 139 1267 1228 1166 193 117 933 835 712 582 458 341 259 189 139 87.5 57.7 34.3 24.2 17.8 11.6 7.13 4.36 2.61 1.78 1.25.97.83.72.69.67.68.77.82 C Range: - 36DEG Test Date:212-1-12 Range: - 18DEG Interval: 1.DEG Test System:EVERFINE GO-R5_V2 SYSTEM V2..265 Test Distance:2.435m [K=1.]
I(cd) 27 9 15 28 29 B A 3 45 6 A B 8 7 3 75 9 6 31 15 5 32 33 34 35 12 135 15 1 2 3 4
1 lm K = 1 9 15 1 6 8 4 8 1 3 2 7 1 lx 5 6 2 5 4 3 d/h 3 1 2
F = 5 lm K =.7 Hcc =. m Hfc =. m Eave = 1 lx Pcc Pw Pfc 7 5 3 5 3 2 N 1 9 8 7 6 5 4 3 2 1 9 8 7 6 4 5 5 4 4 5 H=6 H=6 3 2 1 1 2 2 3 4 5 6 7 8 91 3 2 3 4 5 6 7 8 91 4 S(m2)