Photometric and Electrical Measurement and Test Report for LED Hong Kong Ltd. No.24, Walok Industrial Building, SanMei Street, FoTan New Territory Hong Kong Oct 17, 212 Product Name: 1.2M,1 24W LED Corrosion proof Model No: R124LEDCP-1 Test Engineer: David Zhang Report No.: BTR66.181.12.164.5 Sample Received Date: Oct 11, 212 Test Performed Date: Oct 11, 212 to Oct 12, 212 Reviewed By: Prepared By: Steven Hsu BEST Test Service Shenzhen Co., Ltd. 1st Floor, 1st Building, Weitai Industrial Park, Yingrenshi, Shiyan, Baoan, Shenzhen, China TEL: +86-755-282366 FAX: +86-755-2346787-811 Email: certification@bestcert.cn Note: The test report only allows to be revised within the retention period unless further standard or the requirement was noticed. This report is for the exclusive use of BEST s Client and is provided pursuant to the agreement between BEST and its Client. BEST s responsibility and Liability are limited to the terms and conditions of the agreement. BEST assumes no liability to any party, other than to the Client in accordance with the agreement, for any loss, expense or damage occasioned by the use of this report. Only the Client is authorized to permit copying or distribution of this report and then only in its entirety. Any use of the BEST name or one of its marks for the sale or advertisement of the tested material, product or service must first be approved in writing by BEST. The observations and test results in this report are relevant only to the sample tested. This report by itself does not cover that the material, product, of service is or has ever been under a BEST certification program. National Voluntary Laboratory Accreditation Program (NVLAP) has accredited this laboratory under ISO1725: 25 for specific laboratory activities as listed in the NVLAP directory of accredited laboratories. The results shown in this report were determined by this laboratory in accordance with its terms of accreditation.
LED Hong Kong Ltd. Model: R124LEDCP-1 TABLE OF CONTENTS 1 - GENERAL INFORMATION... 3 1.1 PRODUCT DESCRIPTION FOR EQUIPMENT UNDER TEST (EUT)... 3 1.2 OBJECTIVE... 3 1.3 TEST FACILITY DESCRIPTION... 4 1.4 TEST EQUIPMENT LIST... 4 2 - TEST METHOD... 5 3 SUMMARY OF TEST RESULT... 6 4 SPECTRAL FLUX PLOTS... 7 5 EUT PHOTOS... 8 6 LUMINOUS INTENSITY DISTRIBUTION TEST PLOTS (CIE CHROMATICITY)... 9 Report No.BTR66.181.12.164.5 Page 2 of 9 Photometric and Electrical Test Report
LED Hong Kong Ltd. Model: R124LEDCP-1 1 - GENERAL INFORMATION 1.1 Product Description for Equipment under Test (EUT) Applicant : LED Hong Kong Ltd. Product Name : 1.2M,1 24W LED Corrosion proof Model No : R124LEDCP-1 Brand Name : ROBUS Nominal Operation Voltage : AC 24V/5Hz Nominal Power : 24W Nominal CCT : 55K Nominal CRI : 69.3 Nominal Lumen Output : 2665.3 Lumens Nominal Life Time : 2 Hours Number of hours operated prior to measurement for new sample : Hours Stabilization Time : 1.5 Hours Total operating time for measurement include stabilization time : 3.5 Hours Date of Receiving Sample : Oct 11, 212 Measurement quantities measured : 1 pcs Orientation During Testing : Horizontal Test Requested : 1. Electrical and Photometric Test; 2. Luminous Intensity Distribution Test. (Note: The reports of BTR66.181.12.164.5 &BTR66.181.12.164.5-1 share the same test data) 1.2 Objective The following test report is prepared on behalf of LED Hong Kong Ltd. use the following American National Standards or illumination Engineering Society of North America test guides: ANSI C78.377-28: Specifications for the Chromaticity of Solid State Lighting Products; ANSI C79.1 22: American National Standard for Electric Lamps Nomenclature for Glass Bulbs Intended for Use with Electric Lamps; ANSI C78.2 23: American National Standard for Electric Lamps A, G, PS, and Similar Shapes with E26 Medium Screw Bases; ANSI C78.21 23: American National Standard for Electric Lamps PAR and R Shapes; ANSI C78.24 21: American National Standard for Electric Lamps Two-inch (51 mm); Integral-reflector Lamps with Front Covers and GU5.3 or GX 5.3 Bases; ANSI/IEC C81.61-23: American National Standard for Electric Lamp Bases; ANSI/IEEE C62.41 1991 (1-May-1991): Surge Voltages in Low-Voltage AC Power Circuits, Recommended Practice for; CIE Publication No. 13.3 1995: Method of Measuring and Specifying Color Rendering of Light Sources; CIE Publication No. 18.2 1983: The Basis of Physical Photometry; IESNA LM-16-1993: Practical Guide to Colorimetry of Light Sources; IESNA LM-28-89 1989: Guide for the Selection, Care, and Use of Electrical Instruments in the Photometric Laboratory; IESNA LM-79-8 Electrical and Photometric Measurement of Solid State Lighting Products UL 1993 1999: Standard for Self-Ballasted Lamps and Lamp Adapters; UL 875 29: Light Emitting Diode (LED) Equipment for Use in Lighting Products. Report No.BTR66.181.12.164.5 Page 3 of 9 Photometric and Electrical Test Report
LED Hong Kong Ltd. Model: R124LEDCP-1 1.3 Test Facility Description The Energy Efficiency Lab used by BEST to collect energy efficiency measurement data is located in 1st Floor, 1st Building, Weitai Industrial Park, Yingrenshi, Shiyan, Baoan, Shenzhen, China. BEST Test Service Shenzhen Co., Ltd is a National Institute of Standards and Technology (NIST) accredited laboratory, under the National Voluntary Laboratory Accredited Program (Lab Code 277-). BEST Test Service Shenzhen Co., Ltd is also an ELI accredited lab for lighting products (ELI Certificate No. ELI-L4-21) and UL accredited lab for lighting products 1.4 Test Equipment List Device Manufacture Model No Serial No Cal. Date Cal Due Date Integral Sphere Integral Sphere Everfine Everfine 1.5M SPEKTRON 1.5M SPEKTRON 684T Oct 2, 211 Oct 2, 212 9625 Oct 2, 211 Oct 2, 212 Integral Sphere Labsphere LMS-65 6112416 Mar 1, 212 Mar 9, 213 Spectro Meter Assy Labsphere CDS 21 21711416 Mar 1, 212 Mar 9, 213 Plus UV-VIS-Near IR Spectrophotometer Colorimeter Plus UV-VIS-Near IR Spectrophotometer Colorimeter Everfine Everfine PMS-8-V1 (38nm-8nm) PMS-7 (2nm-8nm) 6833 Oct 2, 211 Oct 2, 212 981 Oct 2, 211 Oct 2, 212 Goniophotometer Everfine GOR-5 191 Nov 2, 211 Nov 19, 212 6 1/2 Digital Multimeter Agilent 3441A MY472386 Oct 18, 211 Oct 17, 212 AC Power Source AC Power Source California Instrument California Instrument 151I S1393 N/A N/A 151L L3572 N/A N/A Standard Light Source OSRAM 24V/5W NO.1 Sep 17, 212 Sep 16, 213 Standard Light Source OSRAM 24V/5W NO.2 Sep 17, 212 Sep 16, 213 Multi-Function AC standard Meter Everfine PF21S 651 Oct 18, 211 Oct 17, 212 Digital Power Meter Everfine PF9811 9229 Oct 18, 211 Oct 17, 212 Digital Power Meter YOKOGAWA WT21 91K319 Oct 18, 211 Oct 17, 212 Digital Power Meter YOKOGAWA WT21 91K3117 Oct 18, 211 Oct 17, 212 Digital Power Meter YOKOGAWA WT21 91K3116 Oct 18, 211 Oct 17, 212 Ballast Parameter Analyzer Everfine PF9821 955 Oct 18, 211 Oct 17, 212 Second Meter TIANFU PC 396 N/A Oct 18, 211 Oct 17, 212 Digital Storage Tektronix TDS212B C51911 Oct 18, 211 Oct 17, 212 Oscilloscope Statement of Traceability: BEST Test Service Shenzhen Co., Ltd. certifies that all calibration has been performed using suitable standards traceable to the NIM China. Report No.BTR66.181.12.164.5 Page 4 of 9 Photometric and Electrical Test Report
LED Hong Kong Ltd. Model: R124LEDCP-1 2 - Test Method 2.1 Photometric and Electrical Measurement (Integrated Sphere Method) Total light output (luminous flux) for the 25 ±1 ambient temperature conditions is measured using a 1.6m integrating sphere. Temperature is measured at a position inside the sphere. Spectral radiant flux measurements are made using Labsphere LMS-65 to the detector port of the integrating sphere. Each lamp is operated at rated voltage in its designated orientation. Each lamp should be stable before measurements are made. The determining method of stable is as follows: Step 1 Take 3 measurements of the lamp light output at 15 minute interval (total time=3mintues.)this time period is in addition to the recommended pre-burning time. Step 2 Calculate the percent difference between the maximum measured value and the minimum measured value for the three consecutive measurements. Step 3 if the value calculated in Step 2 does not exceed.5 percent, the lamp is considered stable. Luminous flux, chromaticity coordinates, correlated color temperature and color rendering index for each lamp are calculated from the spectral radiant flux measurements taken at 2 nm intervals over the range 35 to 15 nm. The calibration of the sphere photometer-spectrometer system is traceable to the NIST USA. Lamp efficacy (lumens per watts) for each lamp model is computed based on the revised luminous flux result. Electrical measurements including voltage, current, power and power factor are measured using the YOKOGAWA WT21 digital power Meter. The total uncertainty of the light output measurements is estimated, at the 95% confidence level, not to exceed ±1.12% over the wavelength range 35-15 nm. 2.2 Photometric and Electrical Measurement (GonioPhotometer Method) Before each measurement, the method below should be used to determine the lamp is stable or not. Step 1 Take 3 measurements of the lamp intensity at 15 minute interval (total time=3mintues.)this time period is in addition to the recommended pre-burning time. Step 2 Calculate the percent difference between the maximum measured value and the minimum measured value for the three consecutive measurements. Step 3 if the value calculated in Step 2 does not exceed.5 percent, the lamp is considered stable. A Everfine GOR-5 Goniometer was used to measure the intensity (candelas) at each angle of distribution for each sample; the photometric distance is 2.436m. Ambient temperature was measured equal to the height of the sample mounted on the Goniometer equipment. Each sample was operated at input rated voltage in its designated orientation. Each sample was allowed to be stable before measurement was made. Electrical measurements including voltage, current, power and power factor were measured using the YOKOGAWA WT21 Power Analyzer. Some graphics were created with Photometric Plus software. Report No.BTR66.181.12.164.5 Page 5 of 9 Photometric and Electrical Test Report
LED Hong Kong Ltd. Model: R124LEDCP-1 3 Summary of Test Result Item Test Result Accreditation Required Fields Lumen Output (Lumens) Luminous Efficacy (lm/w) Correlated Color Temperature (CCT) 2665.3 NVLAP/EPA 17.23 NVLAP/EPA 5222.7 NVLAP/EPA Color Rendering Index CRI 69.3 NVLAP/EPA Input Power (W) 24.85 NVLAP/EPA Power Type AC DC / Input Voltage (V) Input Current (A) 24. NVLAP/EPA.1187 NVLAP/EPA Power Factor.872 NVLAP/EPA Optional Fields x(cie 1931).3396 NVLAP/EPA y(cie 1931).3573 NVLAP/EPA u (CIE 1976).256 NVLAP/EPA v (CIE 1976).4866 NVLAP/EPA Duv(CIE 1976).46 NVLAP/EPA R9-16.5 NVLAP/EPA Report No.BTR66.181.12.164.5 Page 6 of 9 Photometric and Electrical Test Report
LED Hong Kong Ltd. Model: R124LEDCP-1 4 Spectral Flux Plots Report No.BTR66.181.12.164.5 Page 7 of 9 Photometric and Electrical Test Report
LED Hong Kong Ltd. Model: R124LEDCP-1 5 EUT Photos Report No.BTR66.181.12.164.5 Page 8 of 9 Photometric and Electrical Test Report
LED Hong Kong Ltd. Model: R124LEDCP-1 6 Luminous Intensity Distribution Test Plots (CIE Chromaticity) This page is blank and see next page. Report No.BTR66.181.12.164.5 Page 9 of 9 Photometric and Electrical Test Report
BEST TEST SERVICE SHENZHEN CO., LTD. Page 1 Of 16 LUMINAIRE PHOTOMETRIC TEST REPORT Test:U:24.V I:.1187A P:24.85W PF:.8723 Lamp Flux:2665.3x1 lm NAME: DIM.: MFR.: LED Hong Kong Ltd TYPE:R124LEDCP-1 SPEC.: SUR.: WEIGHT: SERIAL No.: PROTECTION ANGLE: DATA OF LAMP PHOTOMETRIC DATA Eff: 17.23 lm/w MODEL R124LEDCP-1 Imax(cd) 699.5 S/MH(C/18) 1.25 NOMINAL POWER(W) 24 LOR(%) 1. S/MH(C9/27) 1.46 RATED VOLTAGE(V) 24 TOTAL FLUX(lm) 2665. UP,DN(C-18) 3.6,47.5 NOMINAL FLUX(lm) 2665.3 CIE CLASS DIRECT UP,DN(C18-36) 3.2,45.7 LAMPS INSIDE 1 up(%) 6.8 CIBSE SHR NOM 1.5 TEST VOLTAGE(V) 24. down(%) 93.2 CIBSE SHR MAX 1.55 LUMINOUS INTENSITY DISTRIBUTION DIAGRAM S(m) PLANAR ISOLUX DIAGRAM(UNIT:lx) C(DEG) 9-15 -/+18 15 1 7 8-12 12 6 2 5-9 9 4 14 28-6 42 6 56 UNIT:cd C/18,13.7-3 7 3 C9/27,148.4 AVERAGE BEAM ANGLE(5%):126.1 DEG 3 1 2 54 48 41 34 27 3 MH=1m 2 68. 34. 2. 6.8 C Range: - 36DEG Test Date:212-1-12 Range: - 18DEG Interval: 1.DEG Test System:EVERFINE GO-R5_V2 SYSTEM V2..265 Test Distance:2.435m [K=1.]
BEST TEST SERVICE SHENZHEN CO., LTD. Page 2 Of 16 ZONAL FLUX DIAGRAM AND LUMINANCE LIMITATION CURVES ZONAL FLUX DIAGRAM: C C45 C9 C135 C18 C225 C27 C315 zone total %lum,lamp 1 67.5 685.7 692.5.6 661.2 672.3 685.5 677.5-1 64.9 64.9 2.44,2.44 2 634.5 67.8 695.6 661.1 617.5 651.7 677.3 662. 1-2 189.6 254.5 9.55,9.55 3 57.7 654.4 673.8 637.1 548.2 62.7 646.2 631.9 2-3 297.1 551.6 2.7,2.7 4 482.2 593. 622.6 572.8 457.4 553.5 599.9 565.8 3-4 37. 921.7 34.6,34.6 5 373.1 512. 548.6 49.3 35.2 479.9 525.5 493.1 4-5 41.2 1323 49.6,49.6 6 249.9 412.1 467.2 391.8 232.5 383.2 446.2 395.9 5-6 383.6 176 64,64 7 124.7 321. 398.3 3.2 114.2 299.7 364.5 36.7 6-7 328.6 235 76.4,76.4 8 39.1 253.3 317.6 235.3 36.3 221.6 288.3 225.5 7-8 257.9 2293 86,86 9 11.98 184.7 241.6 172.4 12.18 16.7 214.7 161.4 8-9 191.5 2484 93.2,93.2 1 8.314 75.67 133.4 73.7 8.176 71.61 122.5 66.52 9-1 118.4 263 97.7,97.7 11 4.296 16.95 43.21 16.75 4.425 15.32 35.31 14.57 1-11 42.1 2645 99.2,99.2 12 1.99 7.777 14.14 7.736 2.82 7.184 12.83 6.836 11-12 11.6 2656 99.7,99.7 13.958 3.862 7.48 3.81 1.44 3.694 6.273 3.323 12-13 4.82 2661 99.9,99.9 14.6123 2.84 3.843 2.6.5969 1.793 3.497 1.73 13-14 2.192 2663 99.9,99.9 15.5417 1.53 2.22 1.481.4248.9725 1.727 1.123 14-15 1.5 2664 1,1 16.5331 1.97 1.52 1.5.3768.445.9512.7887 15-16.4725 2665 1,1 17.494.5774.648.4725.3869.387.3813.3698 16-17.1817 2665 1,1 18.456.4556.46.4527.4539.4568.4572.4497 17-18.439 2665 1,1 DEG LUMINOUS INTENSITY:cd UNIT:lm LUMINANCE LIMITATION CURVES GLARE CLASS ILLUMINANCE (lx) 1.15 A 2 1 5 <=3 1.5 B 2 1 5 <=3 1.85 C 2 1 5 <=3 2.2 D 2 1 5 <=3 2.55 E 2 1 5 <=3 a b c d e f g h a b c d e f g h G(DEG) 85 75 65 55 45 8 1 2 3 4 5 6 8 1 2 3 4 1 C/18 C9/27 LUMINANCE (cd/(m2)) 8 6 4 3 a/h 2 LUMINANCE cd/(m2) G(DEG) C/18 C9/27 85 2363 31628 8 2247 18293 75 2841 144 7 3647 11646 65 4383 1271 6 4997 9345 55 5453 8834 5 584 8535 45 678 832 C Range: - 36DEG Test Date:212-1-12 Range: - 18DEG Interval: 1.DEG Test System:EVERFINE GO-R5_V2 SYSTEM V2..265 Test Distance:2.435m [K=1.]
BEST TEST SERVICE SHENZHEN CO., LTD. Page 3 Of 16 CU AND LUMINAIRE BUDGETARY ESTIMATE DIAGRAM Test:U:24.V I:.1187A P:24.85W PF:.8723 Lamp Flux:2665.3x1 lm NAME: DIM.: MFR.: LED Hong Kong Ltd TYPE:R124LEDCP-1 SPEC.: SUR.: WEIGHT: SERIAL No.: PROTECTION ANGLE: cc w fc RCR. 1. 2. 3. 4. 5. 6. 7. 8. 9. 1. 8% 7% 5% 3% 5% 3% 1% 5% 3% 1% 5% 3% 1% 5% 3% 1% 2% 2% 2% 2% RCR:Room Cavity Ratio Coefficients of Utilization(CU) 1.17.98.84.73.65.57.51.46.42.39.36 1.17.93.77.64.55.48.42.37.33.3.27 1.17.88.7.57.48.41.35.31.27.24.22 1.14.95.82.71.63.56.5.45.41.38.35 1.14.91.75.63.54.47.41.37.33.3.27 1.14.86.69.56.47.4.35.3.27.24.22 1.7.9.77.67.59.53.48.43.39.36.33 1.7.86.71.6.52.45.4.35.32.29.26 1.7.82.66.54.46.39.34.3.26.24.21 1.1.85.73.63.56.5.45.41.38.35.32 1.1 1.1.81.79.68.63.57.52.5.44.43.38.38.33.34.29.31.26.28.23.26.21 1% 5% 3% 1% 2%.96.96.96.8.77.75.69.65.61.6.55.51.53.47.43.48.42.37.43.37.32.39.33.28.36.3.25.33.27.23.31.25.21.93.72.58.48.4.34.3.26.23.21.19 LAMPS 5 LUMINAIRE BUDGETARY DIAGRAM 4 3 2 1 9 8 7 6 5 4 6 H=7 H=7 CONDITIONS FLUX 5lm FACTOR.7 Hdown.m Hwork.m Ework(AVE) 1lx cc w fc 3 6 7 5 3 5 5 3 2 4 5 4 2 1 2 3 4 5 7 1 2 3 5 7 1k 2k 3k 4k 5k 7k AREA(m2) C Range: - 36DEG Test Date:212-1-12 Range: - 18DEG Interval: 1.DEG Test System:EVERFINE GO-R5_V2 SYSTEM V2..265 Test Distance:2.435m [K=1.]
BEST TEST SERVICE SHENZHEN CO., LTD. Page 4 Of 16 WEC AND CCEC Test:U:24.V I:.1187A P:24.85W PF:.8723 Lamp Flux:2665.3x1 lm NAME: DIM.: MFR.: LED Hong Kong Ltd TYPE:R124LEDCP-1 SPEC.: SUR.: WEIGHT: SERIAL No.: PROTECTION ANGLE: cc 8% 7% 5% 3% 1% w 5% 3% 1% 5% 3% 1% 5% 3% 1% 5% 3% 1% 5% 3% 1% fc 2% 2% 2% 2% 2% RCR RCR:Room Cavity Ratio Wall Exitance Coeffcients(WEC). 1..382.217.69.373.213.68.355.24.65.339.196.63.324.188.61 2..334.183.56.325.179.55.31.172.53.295.166.52.282.159.5 3..298.158.47.29.155.47.276.15.46.263.144.44.251.139.43 4..269.14.41.262.137.41.25.132.4.238.128.39.227.123.38 5..245.125.36.239.123.36.228.118.35.217.115.34.27.111.33 6..225.113.32.219.111.32.29.17.31.2.14.3.191.1.3 7..27.13.29.22.11.29.193.98.28.185.95.28.177.92.27 8..192.94.26.188.93.26.18.9.26.172.87.25.165.84.25 9..179.87.24.175.86.24.168.83.24.161.81.23.154.78.23 1..168.81.22.164.79.22.157.77.22.151.75.21.145.73.21 cc w fc RCR. 1. 2. 3. 4. 5. 6. 7. 8. 9. 1. 8% 7% 5% 3% 1% 5% 3% 1% 5% 3% 1% 5% 3% 1% 5% 3% 1% 5% 3% 1% 2% 2% 2% 2% 2% RCR:Room Cavity Ratio Ceiling Cavity Exitance Coefficients(CCEC).242.237.23.223.215.27.199.192.185.179.173.242.28.184.167.154.144.136.129.124.119.115.242.181.145.123.18.98.91.85.81.78.76.27.23.197.191.184.178.171.165.159.154.149.27.178.159.144.133.125.118.112.17.13.99.27.156.126.17.94.85.79.74.71.68.66.141.139.135.131.127.122.118.114.11.17.13.141.123.11.1.93.87.83.79.75.72.7.141.81.18.8.88.78.75.76.66.73.6.71.56.69.53.66.5.64.48.62.47.6.81.81.71.63.64.51.59.44.54.39.51.36.49.33.46.31.44.3.43.29.41.28.26.26.26.23.25.21.24.19.24.18.23.17.22.16.21.15.21.15.2.14.2.14.26.2.17.14.13.12.11.1.1.1.9 C Range: - 36DEG Test Date:212-1-12 Range: - 18DEG Interval: 1.DEG Test System:EVERFINE GO-R5_V2 SYSTEM V2..265 Test Distance:2.435m [K=1.]
BEST TEST SERVICE SHENZHEN CO., LTD. Page 5 Of 16 Uncorrected UGR Table Test:U:24.V I:.1187A P:24.85W PF:.8723 Lamp Flux:2665.3x1 lm NAME: DIM.: MFR.: LED Hong Kong Ltd TYPE:R124LEDCP-1 SPEC.: SUR.: WEIGHT: SERIAL No.: PROTECTION ANGLE: ceiling/cavity.7.7.5.5.3.7.7.5.5.3 walls.5.3.5.3.3.5.3.5.3.3 working plane.2.2.2.2.2.2.2.2.2.2 Room dimensions Viewed crosswise Viewed endwise x = 2H y = 2H 3H 4H 6H 8H 12H 18.6 19.7 2.1 2.3 2.4 2.4 2.1 21.1 21.5 21.6 21.6 21.6 18.9 2.1 2.5 2.8 2.8 2.9 2.4 21.5 21.8 22. 22. 22.1 2.8 21.9 22.2 22.4 22.5 22.5 2.5 23. 24.4 25.9 26.7 27.6 22. 24.4 25.7 27.1 27.9 28.7 2.9 23.4 24.8 26.3 27.1 28. 22.3 24.8 26.1 27.5 28.3 29.2 22.7 25.2 26.5 28. 28.8 29.6 4H 2H 3H 4H 6H 8H 12H 19.7 21. 2.1 21.4 21.8 21.1 22.4 21.5 22.8 23.2 21.2 22.4 21.7 22.8 23.3 23.9 25.1 24.3 25.5 25.9 21.9 22.9 22.3 23.4 23.9 25.5 26.6 25.9 27. 27.5 22.3 23.3 22.8 23.8 24.3 27.2 28.2 27.7 28.6 29.1 22.5 23.4 23. 23.9 24.5 28.1 29. 28.6 29.5 3. 22.6 23.5 23.2 24. 24.6 29.1 3. 29.6 3.5 31. 8H 4H 6H 8H 12H 23. 23.9 23.5 24.4 25. 25.8 26.8 26.4 27.3 27.8 23.9 24.7 24.5 25.2 25.8 27.9 28.6 28.4 29.2 29.7 24.3 25. 24.9 25.6 26.2 29. 29.7 29.6 3.3 3.9 24.7 25.3 25.3 25.9 26.5 3.3 3.9 3.9 31.5 32.1 12H 4H 6H 8H 23.3 24.5 25.2 24.2 25.3 25.8 23.9 25.1 25.7 24.7 25.8 26.3 25.3 26.4 27. 25.9 28. 29.3 26.7 28.7 29.9 26.4 28.6 29.8 27.2 29.2 3.4 27.8 29.8 31.1 Variations with the observer position at spacings: S = 1.H +.1 / -.2 +.1 / -.1 1.5H +.2 / -.4 +.2 / -.3 2.H +.3 / -.5 +.2 / -.4 CIE Pub.117 Corrected 2665 lm Total Lamp Luminous Flux.(8log(F/F) = 3.4) C Range: - 36DEG Test Date:212-1-12 Range: - 18DEG Interval: 1.DEG Test System:EVERFINE GO-R5_V2 SYSTEM V2..265 Test Distance:2.435m [K=1.]
BEST TEST SERVICE SHENZHEN CO., LTD. Page 6 Of 16 UTILIZATION FACTORS TABLE Test:U:24.V I:.1187A P:24.85W PF:.8723 Lamp Flux:2665.3x1 lm NAME: DIM.: MFR.: LED Hong Kong Ltd TYPE:R124LEDCP-1 SPEC.: SUR.: WEIGHT: SERIAL No.: PROTECTION ANGLE: REFLECTANCE Ceiling.8.8.8.7.7.7.5.5.5 Walls.7.5.3.7.5.3.7.5.3 Working plane.2.2.2.2.2.2.2.2.2 ROOM INDEX UTILIZATION FACTORS(PERCENT) k(ri) x RCR = 5 k =.6 52 39 32 51 39 32 49 38 32 25.8 61 48 4 6 48 4 58 47 4 32 1. 69 56 48 68 56 48 65 57 47 39 1.25 76 64 55 74 63 55 71 61 54 46 1.5 81 69 61 79 68 6 75 66 59 5 2. 88 78 7 86 76 69 82 73 67 58 2.5 92 83 75 9 81 74 85 78 72 62 3. 96 87 8 93 85 79 88 82 76 66 4. 11 93 87 98 91 85 92 87 82 71 5. 13 97 91 1 94 89 95 9 86 74 ROOM INDEX UF(total) Direct According to DIN EN 1332-2 24 Suspended SHRNOM = 1.25 C Range: - 36DEG Test Date:212-1-12 Range: - 18DEG Interval: 1.DEG Test System:EVERFINE GO-R5_V2 SYSTEM V2..265 Test Distance:2.435m [K=1.]
BEST TEST SERVICE SHENZHEN CO., LTD. Page 7 Of 16 ISOCANDELA DIAGRAM Test:U:24.V I:.1187A P:24.85W PF:.8723 Lamp Flux:2665.3x1 lm NAME: DIM.: MFR.: LED Hong Kong Ltd TYPE:R124LEDCP-1 SPEC.: SUR.: WEIGHT: SERIAL No.: PROTECTION ANGLE: VERTICAL(DEG) 9 8 7 6 5 4 3 2 1-1 -2-3 -4-5 -6 1% 69.95 2% 139.9 3% 29.9 4% 279.8 5% 349.8 6% 419.7 7% 489.7 8% 559.6 9% 629.6-7 -8-9 -9-8 -7-6 -5-4 -3-2 -1 1 2 3 4 5 6 7 8 9 Imax:699.5(H.,V-22.) (At:C=9.,Gamma=22.) UNIT: cd HORIZONTAL(DEG) C Range: - 36DEG Test Date:212-1-12 Range: - 18DEG Interval: 1.DEG Test System:EVERFINE GO-R5_V2 SYSTEM V2..265 Test Distance:2.435m [K=1.]
BEST TEST SERVICE SHENZHEN CO., LTD. Page 8 Of 16 AAI Figure Test:U:24.V I:.1187A P:24.85W PF:.8723 Lamp Flux:2665.3x1 lm NAME: DIM.: MFR.: LED Hong Kong Ltd TYPE:R124LEDCP-1 SPEC.: SUR.: WEIGHT: SERIAL No.: PROTECTION ANGLE: Flux out:1481 lm 3.281ft 1m 23.12,63.42fc 248.9,682.6lx 8.813ft 268.62cm 6.562ft 2m 5.78,15.85fc 62.22,17.7lx 17.63ft 537.23cm 9.843ft 3m 2.569,7.46fc 27.65,75.85lx 26.44ft 85.85cm 13.12ft 4m 1.445,3.964fc 15.55,42.66lx 35.25ft 174.46cm 16.4ft 5m.9248,2.537fc 9.955,27.3lx 44.6ft 1343.8cm Height Eavg,Emax Angle:16.66deg Diameter Note:The Curves indicate the illuminated area and the average illumination when the luminaire is at different distance. C Range: - 36DEG Test Date:212-1-12 Range: - 18DEG Interval: 1.DEG Test System:EVERFINE GO-R5_V2 SYSTEM V2..265 Test Distance:2.435m [K=1.]
BEST TEST SERVICE SHENZHEN CO., LTD. Page 9 Of 16 ISOLUX DIAGRAM Test:U:24.V I:.1187A P:24.85W PF:.8723 Lamp Flux:2665.3x1 lm NAME: DIM.: MFR.: LED Hong Kong Ltd TYPE:R124LEDCP-1 SPEC.: SUR.: WEIGHT: SERIAL No.: PROTECTION ANGLE: 66.3' 33.1'.' 33.1' 66.3' 82.9' 25.26m 66.3' 2.21m 49.7' 15.15m 3%.248lx.192fc 5%.3413lx.3171fc 1%.6826lx.6342fc 3% 2.48lx.192fc 5% 3.413lx.3171fc 33.1' 1.1m 16.6' 5.5m.'.m 16.6' 5.5m 33.1' 1.1m 49.7' 15.15m 66.3' 2.21m 82.9' 25.26m 2.21m 1.1m.m 1.1m 2.21m MOUNTING HEIGHT: 33'(1.m) C Range: - 36DEG Test Date:212-1-12 Range: - 18DEG Interval: 1.DEG Test System:EVERFINE GO-R5_V2 SYSTEM V2..265 Test Distance:2.435m [K=1.]
BEST TEST SERVICE SHENZHEN CO., LTD. Page 1 Of 16 Average Luminance Table(CIBSE) Test:U:24.V I:.1187A P:24.85W PF:.8723 Lamp Flux:2665.3x1 lm NAME: DIM.: MFR.: LED Hong Kong Ltd TYPE:R124LEDCP-1 SPEC.: SUR.: WEIGHT: SERIAL No.: PROTECTION ANGLE: Parameter description for average Luminance Symbol Value Unit Luminance in Azimuth Plane Bc refer Table 2 cd/sq.m. Intensity at angle Gamma in given azimuth plane I from data cd/klm Number of lamps N 1 Output of each lamp(initial lumens as specified) F 2665.3 lm Multiplying factor K 1 Luminous area in horizontal plane used in calculations A.1 sq.m. Angle to the downward vertical from light centre Gamma from data deg Table 1. Calculation parameters for determination of CIBSE LG3:1996 Average Luminance G deg 55 5453 6 4997 65 4383 7 3647 75 2841 8 2247 85 2363 C plane(deg) 1 2 3 4 5 6 7 8 9 1 11 12 13 14 15 16 17 6139 6751 7298 7764 812 8366 8535 8643 8662 8559 8371 8125 7814 7423 6952 6346 5579 5859 662 7278 7837 832 8671 8939 91 9135 8999 8745 847 7989 7497 693 6196 5248 5486 6469 7327 869 8722 9274 9678 991 9949 9792 947 9 845 7727 6971 619 4812 525 6318 7551 8674 9624 136718771112411152111639137 9233 8282 721 593 4316 4533 6255 8114 991 11299122341285131921324713191252511811826 9442 7716 5787 3765 4693 726 9951 1265146731641169221738417448171861654315521146511986 9396 657 372 6567 11721624821368253227832938232113323298762875326992439824321534516 518 Table 2. Average Luminance(cd/sq.m.) for defined C plane,gamma angle 18 597 4651 457 3338 2578 275 2232 CIBSE Gamma Average Luminance Patch Luminance Category (deg) maximum calculated specified maximum maximum measured specified maximum Category 1 Category 2 Category 3 55 to 9 65 to 9 75 to 9 3323 3323 3323 2 2 2 --- --- --- 5 5 5 Table 3. Tabulation of Average and Patch Luminance(cd/sq.m.) for defined CIBSE categories No match C Range: - 36DEG Test Date:212-1-12 Range: - 18DEG Interval: 1.DEG Test System:EVERFINE GO-R5_V2 SYSTEM V2..265 Test Distance:2.435m [K=1.]
BEST TEST SERVICE SHENZHEN CO., LTD. Page 11 Of 16 Average Luminance Table(CIBSE) Test:U:24.V I:.1187A P:24.85W PF:.8723 Lamp Flux:2665.3x1 lm NAME: DIM.: MFR.: LED Hong Kong Ltd TYPE:R124LEDCP-1 SPEC.: SUR.: WEIGHT: SERIAL No.: PROTECTION ANGLE: Parameter description for average Luminance Symbol Value Unit Luminance in Azimuth Plane Bc refer Table 2 cd/sq.m. Intensity at angle Gamma in given azimuth plane I from data cd/klm Number of lamps N 1 Output of each lamp(initial lumens as specified) F 2665.3 lm Multiplying factor K 1 Luminous area in horizontal plane used in calculations A.1 sq.m. Angle to the downward vertical from light centre Gamma from data deg Table 1. Calculation parameters for determination of CIBSE LG3:21 Average Luminance G deg 55 5453 6 4997 65 4383 7 3647 75 2841 8 2247 85 2363 C plane(deg) 1 2 3 4 5 6 7 8 9 1 11 12 13 14 15 16 17 6139 6751 7298 7764 812 8366 8535 8643 8662 8559 8371 8125 7814 7423 6952 6346 5579 5859 662 7278 7837 832 8671 8939 91 9135 8999 8745 847 7989 7497 693 6196 5248 5486 6469 7327 869 8722 9274 9678 991 9949 9792 947 9 845 7727 6971 619 4812 525 6318 7551 8674 9624 136718771112411152111639137 9233 8282 721 593 4316 4533 6255 8114 991 11299122341285131921324713191252511811826 9442 7716 5787 3765 4693 726 9951 1265146731641169221738417448171861654315521146511986 9396 657 372 6567 11721624821368253227832938232113323298762875326992439824321534516 518 Table 2. Average Luminance(cd/sq.m.) for defined C plane,gamma angle 18 597 4651 457 3338 2578 275 2232 range (deg) 55 to 9 65 to 9 Average Luminance(cd/sq.m) Maximum Maximum limit for screen type & software category used measured Type I,II screen Type I,II screen Type III screen Type III screen Some neg.s'ware Only pos.s'ware Some neg.s'ware Only pos.s'ware 3323 1 15 2 5 3323 1 15 2 5 Table 3. Tabulation of average luminance(cd/sq.m.) and luminance limits No match C Range: - 36DEG Test Date:212-1-12 Range: - 18DEG Interval: 1.DEG Test System:EVERFINE GO-R5_V2 SYSTEM V2..265 Test Distance:2.435m [K=1.]
BEST TEST SERVICE SHENZHEN CO., LTD. Page 12 Of 16 Planar Illuminance Curve E(lx) 7 6.3 Planar Illuminance Curve MH = 1 m C/18 C9/27 5.6 4.9 4.2 3.5 2.8 2.1 1.4.7-25 -2-15 -1-5 5 1 15 2 25 Distance(m) C Range: - 36DEG Test Date:212-1-12 Range: - 18DEG Interval: 1.DEG Test System:EVERFINE GO-R5_V2 SYSTEM V2..265 Test Distance:2.435m [K=1.]
BEST TEST SERVICE SHENZHEN CO., LTD. Page 13 Of 16 LUMINOUS DISTRIBUTION INTENSITY DATA Test:U:24.V I:.1187A P:24.85W PF:.8723 Lamp Flux:2665.3x1 lm NAME: DIM.: MFR.: LED Hong Kong Ltd TYPE:R124LEDCP-1 SPEC.: SUR.: WEIGHT: SERIAL No.: PROTECTION ANGLE: Table--1 C(DEG) (DEG) 5 678 1 67 15 656 2 635 25 66 3 571 35 53 4 482 45 43 5 373 55 313 6 25 65 185 7 125 75 73.5 8 39. 85 2.6 9 12. 95 1.2 1 8.31 15 6.15 11 4.3 115 2.92 12 1.99 125 1.37 13.95 135.73 14.61 145.56 15.54 155.54 16.53 165.51 17.49 175.49 18.45 23 682 668 651 63 62 567 536 53 462 43 347 289 23 176 142 114 87.9 52.5 21.7 11.2 7.26 4.65 3.7 2.11 1.6 1.3 1.12.98.85.72.65.58.53.51.45 45 686 686 682 671 66 654 622 593 557 512 465 412 361 321 286 253 218 185 134 75.7 34.9 17. 11.2 7.78 5.66 3.86 2.77 2.8 1.73 1.5 1.31 1.1.74.58.53.46 68 688 691 69 688 692 669 644 613 579 541 496 451 414 382 346 34 264 231 179 121 69.3 32.8 18.3 12.2 8.64 6.47 4.55 3.34 2.52 1.99 1.7 1.41 1.6.63.53.45 9 688 692 692 696 69 674 653 623 588 549 57 467 434 398 362 318 276 242 191 133 8.8 43.2 21.4 14.1 9.87 7.41 5.27 3.84 2.87 2.2 1.83 1.5 1.16.65.52.46 113 687 689 687 681 684 66 635 63 568 529 484 439 43 37 334 294 255 224 174 118 68. 32.2 18.2 12.1 8.58 6.39 4.5 3.33 2.52 1.97 1.69 1.38 1.5.59.47.45 135 684 68 674 661 646 637 64 573 536 49 443 392 343 3 267 235 23 172 126 73.1 32.3 16.7 11.1 7.74 5.46 3.81 2.74 2.6 1.7 1.48 1.27 1.5.66.47.51.45 158 678 672 657 638 613 583 544 51 478 437 381 326 269 211 16 121 96.4 76. 46.6 18.5 1.8 7.9 4.62 3.3 2.11 1.61 1.27 1.5.91.78.64.56.48.48.5.46 18 673 661 643 617 586 548 55 457 45 35 292 233 171 114 66.7 36. 19.5 12.2 1.2 8.18 6.14 4.43 3.7 2.8 1.44 1.4.77.6.49.42.39.38.37.39.43.45 23 674 665 65 632 68 575 541 53 467 428 37 319 267 221 169 135 13 79.6 49.5 2.7 1.9 7.32 4.78 3.9 2.6 1.48 1.13.87.6.46.39.37.37.39.43.45 225 677 672 666 652 633 621 588 553 518 48 432 383 339 3 262 222 193 161 118 71.6 3.7 15.3 1.5 7.18 5.17 3.69 2.58 1.79 1.28.97.65.4.36.38.42.46 248 682 676 667 664 636 611 584 555 511 47 427 389 349 36 273 239 22 158 19 62.5 27.5 16.3 11.2 7.61 5.66 4.2 3.3 2.1 1.42 1.5.74.41.38.42.46 27 68 686 682 677 67 646 623 6 565 525 487 446 47 365 323 288 253 215 171 122 74.1 35.3 18.5 12.8 8.64 6.27 4.74 3.5 2.5 1.73 1.24.95.55.38.42.46 293 68 685 68 671 67 644 619 592 564 521 479 437 397 356 313 278 243 25 16 19 6.5 26. 15.8 1.8 7.47 5.48 4.8 2.97 2.15 1.55 1.2.95.58.37.4.45 315 68 677 674 662 643 632 63 566 529 493 448 396 349 37 267 225 195 161 117 66.5 28.1 14.6 1. 6.84 4.8 3.32 2.35 1.7 1.32 1.12.95.79.44.37.4.45 UNIT: cd 338 677 673 659 645 623 591 559 518 483 442 388 332 277 224 17 131 99.9 75.5 43. 17.4 9.61 6.26 3.97 2.56 1.72 1.29 1.1.83.69.56.47.41.37.37.42.46 C Range: - 36DEG Test Date:212-1-12 Range: - 18DEG Interval: 1.DEG Test System:EVERFINE GO-R5_V2 SYSTEM V2..265 Test Distance:2.435m [K=1.]
I(cd) 27 9 7 28 29 B A 14 21 28 A B 8 7 3 35 42 6 31 49 5 32 33 34 35 56 63 7 1 2 3 4
2 d/h 1 2 3 1 1 lm K = 1 4 3 2 5 6 7 9 8 5 4 3 2 1 lx 8 6 15 1
F = 5 lm K =.7 Hcc =. m Hfc =. m Eave = 1 lx Pcc Pw Pfc 7 5 3 5 3 2 N 1 9 8 7 6 5 4 3 2 1 9 8 7 6 4 5 5 4 4 5 H=6 H=6 3 2 1 1 2 2 3 4 5 6 7 8 91 3 2 3 4 5 6 7 8 91 4 S(m2)