The best and most cost-efficient solution for extraction of hazardous airborne contaminants, in applications where small, flexible and easy-to-use arms are required. Nederman FX2 arms are made of lightweight anodized aluminium sections, with two or three adjustable, composite friction joints. Offering strength and durability combined with easy handling, they can be used in many types of environment. They are especially suitable for applications where small, flexible and easy-to-use arms are required. The arm is designed for use in electronic environments where there is a risk of electrostatic discharges. The ESD/EX can also be used for certain applications in potentially explosive atmospheres. Optimal efficiency and low noise provides safe and quiet working environment Ceilings, walls and floors or fixed to worktops mountings and cut2fit extension profile gives maximum installation flexibility The two outermost arm joints can rotate and swivel through 360, which gives the unique maneuverability The lean, smooth and aesthetic design allows arms to fit in well in any environment without compromising its durability and reliability Highly integrated products that save customers time and costs, as well as providing the reliability and functionality to deliver a better performance Název produktu Hlučnost (db(a)) Instalace Materiál BenchTop Extraction Arm FX2 75 ESD/EX 58 db(a) at 240 m3/h Vnitřní Trubky z eloxovaného hliníku Klouby z vodivého PP Potrubní spojky z vodivého EPDM Teplota dýmů max 70 C Průměr prodlužovacího ramena (mm) 75 Průtok (m3/h) 110-240 Délka ramena (m) www.nederman.com 1 11/3/2017
[image] Jméno datasheetu Hmotnost (kg) [model] FX2-ESD/EX-D75-L1100-Nahoru-Krátký 3,2 70603944 FX2-ESD/EX-D75-L1100-Dolů-Krátký 3,2 70604144 FX2-ESD/EX-D75-L1100-Dolů-Stolem 2,6 70604244 FX2-ESD/EX-D75-L1500-Nahoru-Krátký 3,4 70604344 FX2-ESD/EX-D75-L1500-Dolů-Krátký 3,4 70604544 FX2-ESD/EX-D75-L1500-Dolů-Stolem 2,8 70604644 www.nederman.com 2 11/3/2017
[accessory] [partno] FX-Konzolová sada-d50/75/100-l190. Kompletní montážní sada, se standardní konzolí, 190 mm prodlužovacím profilem a montážním přislušenstvím, pro ramena FX2 50/75/100 jejichž vertikální osa je vzdálená 250mm od stěny. FX2-Bracket kit-d50/75/100-l500. Complete mounting kit, with the classic bracket, 500mm (19.68 inch) extension profile and associated parts, for mounting FFX2 50/75/100 arms on the ceiling. FX2-Wall BRKT kit-flat-l190-black. Complete mounting kit, with flat wall bracke,190 mm (7.48 inch) extension profile and associated parts, for mounting FX2 50/75/100 arms with 250 mm (9.84 inch) from the vertical centre line of the arm to the wall. FX-Bench upínací sada D50/75/100, Kompletní sada pro montáž ramen FX2 50/75/100 na hranu stolu. 70501144 70377042 70377044 70501444 FX-Standardní konzole-d50/75/100. Standardní konzole může být použita spolu s Cut2fit prodlužovacím profilem pro ramena FX2 50/75/100 pro montáž na strop,stěnu, podlahu nebo jinou vodorovnou plochu. FX-Cut2fit prodloužení -L1100. Cut2fit prodloužení může být zkráceno na potřebnou délku a smontováno spolu s klasickou konzolí na stěnu nebo na strop. Určeno pro ramena FX2 50/75/100 FX-Cut2fit prodloužení -L2200. Cut2fit prodloužení může být zkráceno na potřebnou délku a smontováno spolu s klasickou konzolí na stěnu nebo na strop. Určeno pro ramena FX2 50/75/100 70501244 70501344 70374600 FX-Stropní krycí deska. Zakrývá stropní otvory pro prodlužovací profil a potrubí. 70502644 FX2-Ceiling cover plate-plus, Cover false/dropped ceiling opening caused by tube. 70377045 FX-Univerzální dymník ESD/EX-D50 / 75/100. Černý vodivý Univerzální dymník vyroben z vodivého plastu pro ramena FX2 50/75/100 je navržen tak, aby zachytil nízkoenergetické znečišťující látky, které jsou výbušné nebo rizikové s ohledem na elektrostatické výboje. Ergonomie madel na obou stranách dymníku usnadňuje jeho nastavování. FX-Kupolový dymník ESD/EX-D50 / 75/100. Černý vodivý kupolový dymník vyroben z vodivého plastu pro ramena FX2 50/75/100 je navržen tak, aby zachytil vysoce rozptylové znečišťující látky, které jsou výbušné nebo rizikové z hlediska elektrostatického výboje.ergonomie madel na obou stranách dymníku usnadňuje jeho nastavování. FX-Kovový dymník - ESD/EX-D50/75/100. ESD vodivý kovový černý dymník vyroben z eloxovaného Al, je navržen tak, aby odsával znečišťující látky při vysokých teplotách, agresivní kouře a kdy musí být zajištěna odolnost proti korozi nebo rozstřiku výbušného prachu. 70500244 70376983 70500544 FX-Přírubový dymník -ESD/EX-D50/75/100 Černý vodivý přírubový dymník vyroben z vodivého plastu, pro ramena FX2 50/75/100 je navržen tak aby odsával maximální zónu aniž by překážel obsluze nebo výrobku. 70502944 FX2-Duct connector-esd/ex-d75. Conductive black duct connector to ease the coupling of 77mm (3 inch) Alu duct to external 100mm (4 inch) ductwork. Please note all arms are already supplied with a duct connector as standard. 70377039 FX2-Al duct-l1000-d75/100tod100. Aluminum duct with 100 mm (4 inch) diameter and 1000 mm (39.37 inch) length is designed to replace vertical ventilation duct above the swivel of FX2 75/100 arm. This is a 70377058 good looking alternative to standard, ventilation duct. FX2-Al duct-l2000-d75/100tod100. Aluminum duct with 100 mm (4 inch) diameter and 2000 mm (78.74 inch) length is designed to replace vertical ventilation duct above the swivel of FX2 75/100 arm. This is a 70377059 good looking alternative to standard, ventilation duct. FX-Hose-ESD-D75-L3000-Black- Flexible hose in black conductive PE with 75 mm (3 inch) diameter and 3000 mm (118.11 inch) length. It shall be used with hose support ring to connect hose to arm. 70377101 FX-Hose-ESD-D100-L3000-Black- Flexible hose in black conductive PE with 100 mm (4 inch) diameter and 3000 mm (118.11 inch) length. It shall be used with hose support ring to connect hose to arm. FX2-Hose support ring-d75. Place into the 75 mm (3 inch) hose to support the connection between the hose and the duct connector of the arm. A must to connect the hose to arm. FX2-Hose support ring-d100. Place into the 100 mm (4 inch) hose to support the connection between the hose and the duct connector of the arm. A must to connect the hose to arm. 70377102 70377067 70377068 www.nederman.com 3 11/3/2017
Pressure Drop diagram: 1) X- Axis: Air Flow Rate (cfm) 2) X- Axis: Air Flow Rate (m/h) 3) Y-Axis: Static Pressure Drop (Pa) 4) Y-Axis: Static Pressure Drop (in. wg.) Sound Level diagram: 1) X- Axis: Air Flow Rate (cfm) 2) X- Axis: Air Flow Rate (m/h) 3) Y-Axis: Sound Pressure Level (db) (A)) www.nederman.com 4 11/3/2017
Material: 1) Flange: Conductive PP plastic 2) Tubes: Aluminum, anodized 10 µm 3) Damper adjustment handle: Aluminum: anodized 10 µm Internal spring: Stainless steel Damper blade: Conductive TP & PP plastic 4) Joints conductive: PP plastic with glass fibre reinforcement Plastic rings conductive: PP plastic with glass fibre reinforcement Axial locking rings conductive: PP plastic with glass fibre reinforcement Adjustment knobs: PA & EDS plastic Threaded shaft inside joints: Stainless Steel 5) Duct connector: conductive EPDM Rubber 6) Swivel: Aluminum, conductive powder coating Rivets: Aluminum Bearings swivel condutive: PP plastic with glass fibre reinforcement www.nederman.com 5 11/3/2017
FX2-ESD/EX-D75-L1100-Down-Through Číslo dielu: 70604244 Max. pracovní rádius: 1090 mm (42,9 in) A: 420 mm (16,5 in) B: 420 mm (16,5 in) FX2-ESD/EX-D75-L1500-Down-Through Číslo dielu: 70604644 Max. pracovní rádius: 1450 mm (57,1 in) A: 500 mm (19,7 in) B: 700 mm (27,5 in) www.nederman.com 6 11/3/2017
FX2-ESD/EX-D75-L1100-Nahoru-Krátký Číslo dielu: 70603944 Max. pracovní rádius: 1090 mm (42,9 in) A: 420 mm (16,5 in) B: 420 mm (16,5 in) FX2-ESD/EX-D75-L1500-Nahoru-Krátký Číslo dielu: 70604344 Max. pracovní rádius: 1450 mm (57,1 in) A: 500 mm (19,7 in) B: 700 mm (27,5 in) www.nederman.com 7 11/3/2017
FX2-ESD/EX-D75-L1100-Dolů-Krátký Číslo dielu: 70604144 Max. pracovní rádius: 1090 mm (42,9 in) A: 420 mm (16,5 in) B: 420 mm (16,5 in) FX2-ESD/EX-D75-L1500-Dolů-Krátký Číslo dielu: 70604544 Max. pracovní rádius: 1450 mm (57,1 in) A: 500 mm (19,7 in) B: 700 mm (27,5 in) www.nederman.com 8 11/3/2017
Wall mounting examples: Left: FX2-Up-Low arm with following accessories: -FX2-Bracket kit-d50/75/100-l500 -FX2-Ceiling cover plate-plus -FX2-Alu duct -FX2-Duct connector-esd/ex-d100 Right: FX2-Up-Low arm with following accessories: -FX2-Wall BRKT kit-flat-l190-black -FX2-Ceiling cover plate-plus -FX2-Alu duct -FX2-Duct connector-esd/ex-d100 www.nederman.com 9 11/3/2017
Bench mounting examples: Left: FX2-Down-Low arm with following accessories: -FX2-Bench bracket kit-d50/75/100 Right: FX2-Down-Through arm www.nederman.com 10 11/3/2017
Ceiling mounting example: FX2-Up-Low arm with following accessories: -FX-Classic bracket -FX-Cut2fit extension-l1100 -FX2-Alu duct -FX2-Duct connector-esd/ex-d100 -FX-Ceiling cover plate Other mounting examples: Left: Shelf mounting with FX2-Up-Low arm and following accessories: -FX2-Bench bracket kit Right: Floor mounting with FX2-Up-Low arm and following accessories: -FX-Classic bracket -FX-Cut2fit extension-l1100 www.nederman.com 11 11/3/2017