1/7 Description IP67, Class I. IK10+. Stainless steel construction including PCS hardware. Safety glass lens, max. load 5 tonnes. Luminaire can be driven over at low speed. Silicone rubber gasket. Factory-sealed termination chamber with cable gland and 0.5 m of flexible PVC-free cable. Integral EC electronic converter. Advanced thermal management protects LEDs while optimising lumens output. LED module can be easily removed for upgrading. CADoptimised optics for superior illumination and glare control. Luminaire requires installation blockout and sealable junction box, which are included in supply. ASC Anti Slip Coating on request. Beam Type Lamp Type Gear Type Nominal Luminous Flux (lm) LED Lumens symmetric, very narrow beam, sharp cut-off LED-12/24W / 700 ma - 3000 K EC LEDs 12 Total Lumens 245.9 lm 2951 lm Tj 85 C Rated Luminous Flux (lm) LED Lumens Total Lumens 214.3 lm 2572 lm Ta 25 C Rated Input Power 28 W
2/7 Material Specification Body: Lens: Gasket: Fasteners: Ingress protection: Impact protection: Stainless steel construction Safety glass lens, max. load 5 tonnes Silicone rubber gasket PCS Polymer Coated Stainless Steel hardware IP67 IK10+ Electrical Specification Ballast: Termination: Cable: Integral EC electronic converter Junction box supplied Complete with cable gland and 0.5 m of flexible PVC-free cable
3/7 Mounting Accessories Installation cover Installation cover. Temporarily encloses and protects blockout. 185-0325 Installation cover BE 250
4/7 Electrical Accessories Analogue dimming interface Analogue dimming interface A Weight (kg) L1 430-0011 1-10V analogue dimming interface - - 0.00 0 DALI Interface DALI Interface A Weight (kg) L1 430-0013 DALI interface - - 0.00 0
5/7 Optical Accessories Colour filter Dichroic colour filters available in red, green, blue, yellow. Custom colours or conversion filters to change colour temperature are available on request. Internal component. 185-7463 Colour filter IF blue 159 185-7469 Colour filter IF green 159 185-7472 Colour filter IF yellow 159
6/7 185-7478 Colour filter IF red 159 Surface wash lens IO-360 Broadens light distribution in all planes. 185-9628 Flood lens IO-360 159 Linear spread lens IO-180 Broadens light distribution in one plane only. Normally used with very narrow beam reflector. Internal component, factory installed. 185-9627 Linear spread lens IO-180 159
7/7 Wallwash lens IO-20 Specifically developed for the lighting of architectural surfaces, in combination with WE-EF [M] symmetric medium beam LED optics. Luminaires fitted with the I0-20 wallwash lens are typically positioned at 0.125 x h away from the target surface and spaced up to 1.75 x d apart: h = height of wall/target surface d = 0.125 x h = distance from the wall/target surface s = 1.75 x d = spacing between luminaires The IO-20 LED wallwash lens is factory-installed within the luminaire. The factory-sealed qualities and advantages of the luminaire are fully maintained. 185-9629 Wallwash lens IO-20 159 Colour correction filter A Weight (kg) L1 on request IF-3000K > 2400K - - 0.00 0