Instruction Manual. P/N:EVO3000 Vehicle Application: Make: Volkswagen Model: Mk7 Golf/GTI Year: 2015 Engine: 1.8/2.0L 4 Cyl. Turbo TSI EXPLODED VIEW

Similar documents
Instruction Manual EXPLODED VIEW H B M & N

Instruction Manual. Exploded View

Instruction Manual. P/N:EVO9200 Vehicle Application: Make: Ford Model: Mustang EcoBoost Year: 2015

Instruction Manual. P/N:EVO5101 Vehicle Application: Make: Dodge/Chrysler Model: Charger/Challenger/300 Year: C J I

Instruction Manual. (MAF sensor not included)

Instruction Manual. P/N:EVO5102 Vehicle Application: Make: Dodge/Chrysler Model: Charger/Challenger Year: D G C E K J

Instruction Manual. P/N:SP1350 Vehicle Application: Make: KIA Model: Stinger Year: 2018 Engine: V6 3.3L turbo E F G A C D TOOLS REQUIRED

Instruction Manual G H I M L N O B TOOLS REQUIRED

Instruction Manual J K L &J

Instruction Manual. P/N:SP1573 Vehicle Application: Make: Honda Model: Civic (10th Gen) CVT Only Year: 2016 Engine: 1.5L 4-cyl Turbo TOOLS REQUIRED

Instruction Manual. P/N:SP9003 Vehicle Application: Make: Ford Model: Focus RS. Year: 2016 Engine: 2.3L Turbo 4cyl. AWD A J H K

Instruction P/N:SP1573 Vehicle Application: Make: Honda Model: Civic (10th Gen) CVT Only Year: 2016 Engine: 1.5L 4-cyl Turbo

Instruction Manual EXPLODED VIEW

Instruction Manual. P/N:SP3086 Vehicle Application: Make: Audi Model: A6 Year: 2016 Engine: 2.0L 4-cyl. Turbo TFSI F C B I TOOLS REQUIRED.

Instruction Manual. P/N:PF9015 Vehicle Application: Make: Ford Model: F-150 EcoBoost Year: 2015 Engine: 2.7L/3.5L V6 Turbo O T H F M K

Instruction P/N:EVO2000

Instruction P/N:SP1572 Vehicle Application: Make: Honda Model: Civic (10th Gen) CVT Only Year: 2016 Engine: 1.5L 4-cyl Turbo

Instruction P/N:SP1581 Vehicle Application: Make: Honda Model: Civic Si (10th Gen) Year: 2017 Engine: 1.5L 4-cyl Turbo

Instruction P/N:EVO1800

Instruction P/N:EVO1206

Note: Disconnect the negative battery terminal before beginning the installation process.

Part number PF Dodge Ram 5.9L Cummins I6 (TD)

Part number P Chevy Duramax 2008 Chevy Classic Duramax V8 6.6L LBZ, LLY

Nanofibers. Cellulose

Note: Disconnect the negative battery terminal before beginning the installation process.

Part number PF Ford Power-Stroke V8 6.0L 1- Custom cast aluminum intake 1- Large oval filter with inverted (#1023)

Note: Disconnect the negative battery terminal before beginning the installation process.

This kit is equipped with the Injen Ea nanofiber dry filters, Ea nanofiber filters do not require oil.

Part number SP Mitsubishi EVO X 2.0L 4 cyl. 1 pc. air intake system equipped

Part number PF Dodge Cummins I6 5.9L. 1- Custom cast aluminum intake 1- Large oval filter with inverted (#1023)

Part Number SP BMW 335i BMW135i 3.0L Twin Turbo L6

Factory safe air/fuel ratio s for Optimum performance Patent# 7,359,795 Now equipped with Air Fusion

Part number SP Hyundai genesis 2.0L turbo 4 cyl.

Part Number SP BMW 535i 3.0L L6 Twin Turbo

Part number SP Honda Fit cyl. Converts into a short ram

Factory safe air/fuel ratio s for Optimum performance Patent# 7,359,795 Now equipped with Air Fusion

Part number SP Nissan 350Z 3.5L, V6

Factory safe air/fuel ratio s for Optimum performance Patent# 7,359,795 Now equipped with Air Fusion

Part number PF Chevy Camaro 3.6L V6

Optimum performance, Factory safe air/fuel ratio. Patent Pending

Factory safe air/fuel ratio s for Optimum performance Patent# 7,359,795

Part number SP Honda Element 2.4L, 4 cyl.

Part number PF Chevy Camaro 6.2L V8

Injen strongly recommends that this system be installed by a professional mechanic. MR Technology, The World s First Tuned air Intake System!

Part number SP Honda Civic Ex 4 cyl. 1.8L Manual only

Part number SP Honda Civic Si

Part number SP Mitsubishi Evo VIII, MR,IX 2.0L 4 cyl.

Factory safe air/fuel ratio s for Optimum performance Patent# 7,359,795 Now equipped with Air Fusion

Buy products from authorized and licensed manufacturers using any of our patented processes, beware of cheap knock-offs, look for our licensing logo.

POWER-FLOW:An air intake evolution. Tools required: Part number PF Toyota FJ 4.0L V6

Part number PF8050. Tools required: 1-8mm nut driver 1-8mm socket 1-10mm socket 1-13mm socket 1- ratchet 1- ratchet extension 1- set of allen wrenches

Part number PF8051. Tools required: 1-8mm nut driver 1-8mm socket 1-10mm socket 1-13mm socket 1- ratchet 1- ratchet extension 1- set of allen wrenches

Optimum performance, Factory safe air/fuel ratio.

Part number SP1305. Maintaining your Cold air intake system: Tools required:

Tools required: 1-8mm nut driver 1-10mm socket 1- ratchet 1- Allen wrenches 1- screwdriver

Note:The C.A.R.B. Exempt sticker must be attached under the hood in a manner such that it is easily viewed by an emissions inspector #1022 (A) (C) (B)

Factory safe air/fuel ratio s for Optimum performance Patent# 7,359,795 Now equipped with Air Fusion Patent pending

Part number PF Ford Mustang V6 4.0L

Part number RD1306. Maintaining your Cold air intake system: Tools required:

Factory safe air/fuel ratio s for Optimum performance Patent# 7,359,795 Now equipped with Air Fusion Patent pending

Factory safe air/fuel ratio s for Optimum performance Patent# 7,359,795 Now equipped with Air Fusion Patent pending

Note: Injen strongly recommends that this system be installed by a professional mechanic. MR Technology, The World s First Tuned air Intake System!

Factory safe air/fuel ratio s for Optimum performance Patent# 7,359,795 Now equipped with Air Fusion

Part number SP Mitsubishi Lancer 4 cyl. 2.0L non-turbo. 1- Three piece cold air intake

advanced FLOW engineering Instruction Manual P/N: E Make: FORD Model: SUPER DUTY F-250/350 Year: Engine: V8-6.7L (td) POWER STROKE

advanced FLOW engineering Instruction Manual P/N: / Make: GM Model: Silverado/Sierra 1500 Year: Engine: V8-5.3L / 6.

Factory safe air/fuel ratio s for Optimum performance Patent# 7,359,795 Now equipped with Air Fusion

COBB SF SHORT RAM INTAKE SYSTEM MazdaSpeed3

advanced FLOW engineering Instruction Manual P/N: Make: Can-AM Model: Maverick Year: Engine: 1000cc

advanced FLOW engineering Quantum Air Intake Instruction Manual P/N: D / R

Installation Instructions

advanced FLOW engineering Instruction Manual P/N: / / /

advanced FLOW engineering Instruction Manual P/N: / / GR/ GR

advanced FLOW engineering Instruction Manual P/N: Make: Ford Model: F-250/F-350/F-450/F-550 Year: Engine: V8-6.7L (td) Power Stroke

advanced FLOW engineering Momentum Air Intake Instruction Manual P/N: / /

advanced FLOW engineering Instruction Manual P/N: Make: Chevrolet Model: Corvette Z06 (C7) Year: Engine: V8-6.

The Next Generation. of Intakes. advanced FLOW engineering Momentum Air Intake. Instruction Manual P/N: E

advanced FLOW engineering Instruction Manual P/N: B/1P & B/1P CARB EO: D for Models.

INSTALLATION INSTRUCTIONS: P/N: / D

advanced FLOW engineering Instruction Manual P/N: / / Make: Toyota Model: Tacoma Year: Engine: V6-4.

advanced FLOW engineering Instruction Manual P/N: &

The Next Generation of Intakes. advanced FLOW engineering. Instruction Manual P/N: /

Equipped with AEM Dryflow Filter No Oil Required! INSTALLATION INSTRUCTIONS PART NUMBER: DS (Plastic tube)

POWER-FLOW:An air intake evolution. Tools required: MR Technology, Leading the way!

Nanofibers. Cellulose

advanced FLOW engineering Instruction Manual P/N: / /

advanced FLOW engineering Stage-2 Air Intake Instruction Manual P/N: &

advanced FLOW engineering Instruction Manual P/N: / Make: Toyota Model: Tacoma Year: Engine: L4-2.7L

advanced FLOW engineering Stage-2 Air Intake Instruction Manual P/N: / /

INSTALLATION INSTRUCTIONS

The Next Generation of Intakes advanced FLOW engineering. Instruction Manual P/N: /

advanced FLOW engineering Instruction Manual P/N: TR-1020B Make: Honda Model: Civic Year: Engine: L4-1.8L

advanced FLOW engineering Instruction Manual P/N: B Make: Ford Model: Super Duty F-250/F-350 Year: 2017 Engine: V8-6.7L (td) Power Stroke

INSTALLATION INSTRUCTIONS PART NUMBER: C/P

The Next Generation of Intakes advanced FLOW engineering. Instruction Manual P/N: /

The Next Generation of Intakes. advanced FLOW engineering Momentum Air Intake. Instruction Manual P/N: / / /

advanced FLOW engineering Air Intake System Product Guide Make: GM Model: Trucks (GMT900) Year: Engine: V8-6.0L P/N: &

advanced FLOW engineering Instruction Manual P/N: 51/ P & 51/ B Make: Ford Model: Mustang GT Year: Engine: V8-5.

advanced FLOW engineering Momentum GT Cold Air Intake System Instruction Manual P/N: /

advanced FLOW engineering Instruction Manual P/N: /

Transcription:

EXPLODED VIEW O Page 1 EVO3000 G F M & N C E H P I WARNING: FAILURE TO FOLLOW INSTALLATION INSTRUCTIONS AND NOT USING THE PRO- VIDED HARDWARE MAY DAMAGE THE INTAKE SYSTEM, ENGINE AND COMPONENTS!!! *Do not attempt to install the intake system while the engine is hot. Severe burn could result from touching hot engine components! B D A Vehicle Application: Make: Volkswagen Model: Mk7 Golf/GTI Year: 2015 Engine: 1.8/2.0L 4 Cyl. Turbo TSI P 1 3207 3.5" hump hose TOOLS REQUIRED 10mm Ratchet & Socket 8mm nut drive Allen key Needle nose Phillips Screwdriver Pliers Report any defective or missing parts to the authorized Injen dealer you purchased this product from. Before installing any parts of this system, please read the instructions thoroughly. If you have any questions regarding installation, please contact your Injen Technology dealer. Installation DOES require some mechanical skills. A qualified mechanic is always recommended. A Limited Lifetime Warranty to the original purchaser against defects in material and workmanship on all Injen intake systems excluding the filter element. Any and all warranty coverage is limited to the repair or replacement of the defective part only, at Injen Technology s discretion. The warranty does not cover incidental or consequential damages, nor does it cover the cost of installation or removal of the defective part or its replacement. Proof of purchase is required. K J K L Item QTY. P/N Discription A 1 x-15093 Air box B 1 x-15094 Plenum C 1 x-15095 Tube D 1 x-1082 Air Filter E 2 4005 #56 clamps F 1 4004 #48 clamp G 1 4003 #40 clamp H 1 8051 1/4" NPT fitting I 1 14065 Machined adaptor J 1 15040 Filter minder K 3 8026 Grommet L 1 3198 3mm hose @11" long M 3 6100 M6x20mm phillips screw N 3 8047 Rubberized washers O 1 3120 3x2.75 step hose

NOTE: This intake kit may not work on vehicles with the following aftermarket modifications. Aftermarket Intercooler piping Aftermarket intercooler Turbo upgrade Injen intake systems are street legal in most states unless the state is adopting to California Emissions standards. States that have adopted California emission standards include: Arizona, California, Connecticut, District of Columbia, Maine, Maryland, Massachusetts, New Jersey, New Mexico, New York, Oregon, Pennsylvania, Rhode Island, Vermont, and Washington. These states will require an California Air Resource Board Executive Order Number (CARB E.O.) for the legal use of an Injen intake system in your vehicle for use on public roads or highways. These vehicle will be considered "Legal in California only for racing vehicles competition use only, which may never be used upon a public street or highway. Please keep your factory air box assembly for any future use. The SuperNano-Web filter media is a dry synthetic media that outperforms the competition. The media itself is a proprietary base blend of synthetics and cellulose. Cellulose fibers are larger than synthetic fibers, and have larger spaces between the fibers, causing contaminants to load in the depth of the media and plug the airflow path. This creates higher restriction levels and less capacity. The synthetic fibers in the SuperNano-Web media are submicron in diameter and have small interior fiber spaces, which result in more contaminants being captured on the surface of the media. This can help keep restriction levels low as the filter loads with dirt and containments If you look at the picture to the left, you can see the Nanofiber web on top of our base media. That web, or Super- Nano-Web as we like to call it, helps trap smaller particles and protect your engine. To Clean your filter: Carefully remove the filter from the housing. Once removed, wipe down the housing using a clean shop towel, being careful not to knock any dirt and/or debris in the air inlet. Your filters can be cleaned by carefully vacuuming the filter media from the dirty side, or by holding the filter with one hand and carefully blowing the filter media at a 45-degree angle from the clean side using low-pressure shop air (15-20 lbs. psi). *IT IS IMPORTANT TO NOT USE ANY CLEANERS ON THE SUPERNANO-WEB MEDIA OR APPLY ANY OIL!!! NOTE: DISCONNECT BATTERY BEFORE INSTALLATION!!! Page 2 EVO3000

Vacuum Line 1. Stock box shown in this picture, if desired remove the engine cover for easier installation. 2. Remove small vacuum line from the factory airbox. 3. Pinch the harness on smog pump and pull away from air box. (if equipped with smog pump) 4. With 7mm nut driver, loosen the clamp on turbo housing. 5. Now lift up OEM intake air box assembly out of vehicle. 6. Loosen the 2 screws holding in the front OEM ram-scoop using T25 torx bit. Save screws for later install. Push clips down out of the radiator support. 7. Loosen and pull back the coolant line from the OEM ram-scoop. 8. Now carefully pull back, and pull out the OEM ram-scoop from vehicle. 1/4 OD 1/8 NPT Filter Minder 9. Install and secure the 1/8 NPT fitting to the plenum insert and tighten. 10. Install the 2-3/4 x3 step hose with clamps provided to the turbo housing. 11. Install the provided grommet to the filter minder hole cut-out on injen air box. 12. Attach the 3mm hose to the Filter minder and install the hose through the grommet. Page 3 EVO3000

13. Install the remaining 2 grommets to the holes on bottom of injen air box and secure. 14. Install the filter to the plenum and tighten using 8mm nut driver. Connect the 3mm vacuum line from the filter minder to the barbed fitting on top of the filter. 3. Install the plenum assembly into the air box. 4. Secure using provided M6x20mm phillips screw with rubberized washer. 5. Install the intake assembly into the vehicle. Position to factory holes. Make sure the intake assembly seats in studs. Note:Use lubrication to grommets for easier installation. 6. Now secure the injen Ram scoop using the factory screws from step 6. 7. Install the 3.5 hump hose to the plenum. Do not Tighten. 8. Install the intake tube to the vehicle. Position the tube to step hose and hump hose. 9. Position for the best fit. Tighten clamp using 8mm nut driver. 10. Tighten the hump hose using 8mm nut driver. 11. Connect the smog pump harness to machined fitting on intake tube and secure. 12. Now connect the vacuum line to the 1/4 OD NPT fitting. Page 4 EVO3000

Congratulations! You have just completed the installation of this intake system. Periodically, check the alignment of the intake, normal wear and tear can cause nuts and bolts to come loose. Note: Check clearance and adjust if needed! Failure to check the alignment and adjust the intake can cause damage that will void the warranty. Injen Technology is not responsible for any damages caused by/from improper installation. Test Drive: 1. With the transmission in neutral or park and the parking brake engaged, start the engine. Listen for air leaks or odd noises. If air leaks are detected, secure hoses and connections. For any odd noises, inspect entire system for cause and adjust intake as needed. The Injen intake will function identically to the factory system but will be louder and more powerful. 2. Perform a road test. Listen for odd noises or rattles and fix as necessary. 3. If there are no issues, continue to enjoy your added performance from the Injen performance Intake kit. 4. Injen Technology recommends you periodically check clearance and adjust if needed! Failure to check the alignment and adjust the intake can cause damage that will void the warranty. Injen Technology is not responsible for any damages caused by/from improper installation. 1. Upon completion of the installation, reconnect the negative battery terminal before you start the engine. 2. Align the entire intake system for the best possible fit. Once the intake has been properly fitted continue to tighten all nuts, bolts and clamps. 3. Periodically, recheck the alignment of the intake system and make sure there is proper clearance around and along the length of the intake. Failure to follow proper mainentance procedures may cause damage to the intake and will void the warranty. 4. Start the engine and listen carefully for any odd noises, rattles and/or air leaks prior to taking it for a test drive. If any problems arise go back and check the vacuum lines, hoses and clamps that maybe causing leaks or rattles and correct the problem. 5. Check the filter for excessive dirt build up. Congratulations! You have just completed the installation of the best intake system sold on the market. Enjoy the added power and performance of your new intake system. Page 5 EVO3000