SERIES direct solenoid actuated valves
M a r k 8 d i r e c t s o l e n o i d a c t u a t e d v a l v e s T E C H N I C L D T................................................... 3 V L V E S M O D E L S E L E C T I O N..................................... 4 V L V E / S E D I M E N S I O N S....................................... 5 F L E X I L O K M N I F O L D S...................................... 6 7 S N D W I C H R E S S U R E R E G U L T O R S..................... 8 11 R E G U L T O R K I T S.................................................. 11 M N I F O L D C C E S S O R Y K I T S.................................. 12 S E S S E M L Y K I T S............................................ 13 F L E X I L O K M N I F O L D K I T S.................................. 13 V L V E S E R V I C E K I T S............................................. 14 S O L E N O I D S S E M L Y K I T S..................................... 15 LUG IN FETURES: Mark 8 valves have a plug in base or manifold, a plug in solenoid, and an optional plug in speed control sandwich. The unit to base electrical plug permits instant valve unit replacement without disconnecting piping or wiring. Die cast aluminum alloy multi purpose construction lug in solenoid design ilot light indicates when power is supplied to valve. Flush non locking manual override Time proven lapped spool and sleeve assembly Valve unit to base integral plug High flow capacity in a compact design
M R K 8 M a r k 8 v a l v e s direct solenoid actuated plug in solenoid with indicator light multi purpose 5 ported, 4 way, 2 and 3 positions lapped spool and sleeve assembly Cv to 1.0 and NTF or G Tap ports for unlubricated or lubricated service integral regulators available integral speed control available modular building block system NEM 4 T e c h n i c a l d a t a Valve Data NTF G tap Cv: NTF = 0.80 NTF = 1.0 G Tap = 0.80 G Tap = 1.0 Flow Capacity: (upstream pressure to atmosphere) 37 SCFM @ 80 SIG 46 SCFM @ 80 SIG 790 Nl/m 985 Nl/m @ 6 ar upstream/5 ar downstream Operating ressure Range: 28 Hg. Vacuum to 150 SIG Vacuum to 10 ar Temperature Range: -10 F to +115 F ambient -23 C to +46 C ambient O p e r a t i n g d a t a ll solenoids are continuous duty rated. 12 VDC 24 VDC 24 V 50 Hz. 24 V 60 Hz. 115 V 50 Hz. 120 V 60 Hz. 230 V 50 Hz. 240 V 60 Hz. ower (Watts) 6.0 6.0 Holding Current (mps.) 0.50 0.250 0.84 0.38 0.15 0.09 0.21 0.19 Inrush Current (mps.) N/ N/ 2.25 1.85 0.41 0.38 0.07 0.04 Time to Energize in Seconds Time to De Energize in Seconds 2 osition, Single, Spring Return 0.032 0.032 0.011 0.011 0.011 0.011 0.011 0.011 2 osition, Double, Detented 0.028 0.028 0.012 0.012 0.012 0.012 0.012 0.012 3 osition, Spring Centered 0.028 0.028 0.012 0.012 0.012 0.012 0.012 0.012 2 osition, Single, Spring Return 0.010 0.010 0.011 0.011 0.011 0.011 0.011 0.011 2 osition, Double, Detented N/ N/ N/ N/ N/ N/ N/ N/ 3 osition, Spring Centered 0.008 0.008 0.018 0.018 0.018 0.018 0.018 0.018 MK8-3
M o d e l s e l e c t i o n t a b l e (standard valve/mounting combinations) Valve Function ort Size or DC Individual base with side ports and common exhaust Individual base with side ports and individual exhaust Flexilok manifold, with side & bottom cylinder ports NTF without speed control with speed control without speed control with speed control without speed control with speed control 081S400K () 081S400M (DC) 081S431K 081S435K 081S43K 081S43CK 081S415K 081S425K DC 081S431M 081S435M 081S43M 081S43CM 081S415M 081S425M (2)(4) (14) 082S431K 082S435K 082S43K 082S43CK 082S415K 082S425K E E (3) (1) (5) DC 082S431M 082S435M 082S43M 082S43CM 082S415M 082S425M 081SS400K () 081SS400M 081SS400K (DC) 081SS431K 081SS435K 081SS43K 081SS43CK 081SS415K 081SS425K (2)(4) E E (3) (1) (5) (14) DC 081SS431M 081SS435M 081SS43M 081SS43CM 081SS415M 081SS425M 082SS431K 082SS435K 082SS43K 082SS43CK 082SS415K 082SS425K DC 082SS431M 082SS435M 082SS43M 082SS43CM 082SS415M 082SS425M 081SS500K () 081SS500M 081SS500K (DC) 081SS531K 081SS535K 081SS53K 081SS53CK 081SS515K 081SS525K (2)(4) (14) DC 081SS531M 081SS535M 081SS53M 081SS53CM 081SS515M 081SS525M E E (3) (1) (5) 082SS531K 082SS535K 082SS53K 082SS53CK 082SS515K 082SS525K DC 082SS531M 082SS535M 082SS53M 082SS53CM 082SS515M 082SS525M 081SS600K () 081SS600M 081SS600K (DC) 081SS631K 081SS635K 081SS63K 081SS63CK 081SS615K 081SS625K (2)(4) (14) DC 081SS631M 081SS635M 081SS63M 081SS63CM 081SS615M 081SS625M E E (3) (1) (5) 082SS631K 082SS635K 082SS63K 082SS63CK 082SS615K 082SS625K DC 082SS631M 082SS635M 082SS63M 082SS63CM 082SS615M 082SS625M G tap options: For G tap ports, add a G to the model number. EXMLE: 081SS431MG DIN solenoid options: Replace K with 2 for DIN or replace M with 4 for DIN DC. EXMLE: 081SS4312 DC EXMLE: 081SS4314
M R K 8 V a l v e & b a s e d i m e n s i o n s 081S4 single direct solenoid actuated valve 081SS4, 5, 6 double direct solenoid actuated valve (shown in phantom) ase or NTF or G Tap ports 1/2 NTF conduit port connection NTF common exhaust port Dimensions 1.75 (44.5) O C 1/2 NTF conduit port connection D 0.47 (11.9) C 0.84 (21.3) D E F G 0.69 (17.5) 0.20 (5.16) 0.69 (17.5) 1.63 (41.3) E H I J 1.63 (41.3) 2.94 (74.6) 3.44 (87.4) F G J K K DC 4.13 (104.9) 5.07 (128.8) DC 5.76 (146.3) I L H K J L L 6.88 (174.8) DC 8.26 (209.8) M M 1.38 (35) N 0.94 (23.9) T O Q R S 0.44 (11.2) 0.062 (1.57) 2.00 (50.8) 1.50 (38) 2.23 (56.6) N O Q NTF common exhaust port R C U U V O S T U 3.03 (77) 0.94 (23.9) U U V W 4.60 (116) 0.45 (11.4) Optional ottom ort Locations (5) or NTF or G Tap W W X 0.25 (6.35) Y 0.69 (17.5) dimensions = inches (in parenthesis = mm) Y X
M a r k 8 F l e x i l o k stackable manifold mounting single supply and 2 common exhaust galleries or NTF or G tap cylinder ports end plate tapped, both ends Terminal block option available (see below) H o w t o o r d e r: List in order, left to right, facing cylinder ports & : ssembly kit* K081 4 ipe lug 129 101 in gallery Station 1 082S416K 120/60 locking Disc 229 994 in gallery Station 2 081S400K 120/60 082RT118J016N Regulator locking Disc 229 994 in gallery Station 3 081S400K 120/60 082RT11J Regulator Station 4 082SS415K 120/60 SSEMLED *How to Order ssembly Kits: K081 No. of Stations ort Type m a n i f o l d s lank = NTF G = G Tap Galleries and Metric Conduit C = G Tap Galleries and NTF Conduit ssembly kits are for factory assembled units only and include end plates, screw assemblies, and assembly/testing for proper operation. maximum 12 stations per assembly is recommended. M a r k 8 t e r m i n a l b l o c k a s s e m b l y H o w t o o r d e r: O p t i o n 19M NTF: dd 019M to model number EXMLE: 082SS415K019M G Tap: dd G19M to model number EXMLE: 082SS415KG19M T e r m i n a l b l o c k k i t s ( 15 loks only side & bottom cylinder ports) ORT SIZE No lug Std. lug S.C. lug NTF ports 239 753 239 735 239 739 NTF ports 239 754 239 736 239 740 G ports 239 755 239 737 239 741 G ports 239 756 239 738 239 742 REQ D RT NME RT 1 1 lug Receptacle: Standard 230 768 Speed Control lug 230 769 2 1 Terminal lock ssembly 230 687 1 Mark 8 Flexilok with Terminal lock: OTION 19M 2 F l e x i l o k D i a g r a m s Sample diagram with regulators 3 pressure selector Flexilok with output valve and separate 4 way ( NTF) Flexilok No. 16 auxiliary inlet Flexilok No. 18 alternate outlet auxiliary inlet Flexilok No. 1 alternate outlet Flexilok No. 15 side and bottom + jumper plate on end cylinder ports E E Output 082S416K E E Selector 081S400K 082RT118J016N E E Selector 081S400K 082RT11J E E Standard 4 Way 082SS415K E E X X R X X STTION 1 STTION 2 STTION 3 STTION 4 locking discs must be installed in gallery, as shown.
M R K 8 F l e x i l o k a s s e m b l y d i m e n s i o n s Flexilok Manifold lock, Mark 8 valve and NTF or G Tap ports 1 NTF conduit port connection Dimensions DC 7.73 (196.3) 8.42 (213.9) 3.44 (87.4) D C DC 4.13 (104.9) E C D E 3.59 (91.2) 1.84 (46.7) 1.23 (31.2) F 0.258 (6.55) E G H 2.13 (54.0) 5.57 (141.4) G H I F H DC 6.26 (159) I 6.42 (163) J 4.35 (110.4) K 3.55 (90.1) L M N O 0.34 (8.70) 3.72 (94.4) 2.92 (74.1) 1.03 (26.2) J K L L O M N U T V Q R S 0.40 (10.2) 0.64 (16.3) 0.84 (21.3) 1.68 (42.7) S R S Q 3/8 NTF ports (6) W W X 1 NTF conduit port connection (both ends) T 1.03 (26.2) Y U V 2.19 (55.6) 1.16 (29.4) W X Y Z 1.00 (25.4) 2.80 (71.1) 0.20 (71.1) 1.63 (41.3) dimensions = inches (in parenthesis = mm) or NTF (ports and ) Z Y or NTF (optional)
S a n d w i c h p r e s s u r e r e g u l a t o r s Types: RS / RD / RE / RT / RC / RQ When ordering a valve plus regulator mounted on a base or manifold, list the valve unit only model number and include the mounting requirements only with the regulator. Specify ssembled. Examples: TYE RS TYE RD Valve: 081S400K 120/60 081S400K 120/60 Regulator: 082RS115J 082RD115J SSEMLED SSEMLED T Y E RS Single pressure from a single supply. E E T Y E RD SULY Dual pressure from a single supply. SULY T Y E RC E E T Y E RQ Type RC is Non Relieving: traps downstream pressure if upstream pressure is exhausted. CHECK SSEMLY SULY CHECK SSEMLY Type RQ is Relieving: exhausts pressure in cylinder if upstream pressure is exhausted. T Y E RE External outlet regulator used with jumper plate for single or dual pressure. E T Y E RT SULY Two pressure selector used for multi pressure applications. SULY
M R K 8 R e g u l a t o r m o d e l s e l e c t i o n t a b l e (Standard regulator/mounting combinations) Regulator Function ort Size Individual base, side ports, common exhaust with plug in receptacle Flexilok manifold, side and bottom cylinder ports with plug in receptacle NTF 10 130 SIG 3 30 SIG 5 60 SIG 10 130 SIG 3 30 SIG 5 60 SIG Type RS 081RS131J 081RS331J 081RS431J 081RS115J 081RS315J 081RS415J 081RS_00J 082RS131J 082RS331J 082RS431J 082RS115J 082RS315J 082RS415J Type RS* with speed control 081RS135U 081RS335U 081RS435U 081RS125U 081RS325U 081RS425U 082RS135U 082RS335U 082RS435U 082RS125U 082RS325U 082RS425U Type RD 081RD131J 081RD331J 081RD431J 081RD115J 081RD315J 081RD415J 081RD_00J 082RD131J 082RD331J 082RD431J 082RD115J 082RD315J 082RD415J Type RE** no receptacle 081RE131O 081RE331O 081RE431O 081RE115O 081RE315O 081RE415O 081RE_00O 082RE131O 082RE331O 082RE431O 082RE115O 082RE315O 082RE415O Type RT 081RT131J 081RT331J 081RT431J 081RT115J 081RT315J 081RT415J 081RT_00J 082RT131J 082RT331J 082RT431J 082RT115J 082RT315J 082RT415J Type RC 081RC131J 081RC331J 081RC431J 081RC115J 081RC315J 081RC415J 081RC_00J 082RC131J 082RC331J 082RC431J 082RC115J 082RC315J 082RC415J Type RQ 081RQ131J 081RQ331J 081RQ431J 081RQ115J 081RQ315J 081RQ415J 081RQ_00J 082RQ131J 082RQ331J 082RQ431J 082RQ115J 082RQ315J 082RQ415J G tap options: For G tap ports, add a G to the model number. EXMLE: 082RD115JG * Speed control can only be used with TYE RS. These model numbers include an extra long plug receptacle, part #230 276. For more information, see page 11. **Type RE includes top jumper plate kit #229 686.
S a n d w i c h p r e s s u r e r e g u l a t o r d i m e n s i o n s 1 2 3 4 5 6 7 8 9 10 H I C 11 D E F G 12 13 M L K J Dimensions C D E F G 3.22 1.62 6.14 4.84 1.39 1.61 2.24 (82) (41) (156) (123) (35.3) (41) (57) H I J K L M N 1.60 1.86 5.33 6.44 6.88 10.38 0.50 (40.6) (47) (135) (163) (175) (264) (12.7) D u a l c h e c k a s s e m b l i e s: RC / RQ 14 15 16 REQ D RT NME RT 1 *2 Gauge (See chart on page 11) 2 *2 dapter Fitting 134 302 3 *2 90º Tube Fitting (Std.) 134 303 4 *2 Straight Fitting (optional) 134 304 5 1 Regulator lock: RS 125 338 RD, RC, RQ 125 339 RT 125 340 RE 124 344 6 1 lug Receptacle RD 230 274 RS, RT, RC, RQ 230 286 (not req d for RE) lug for speed contl. 230 276 7 1 Screw 127 318 8 ** Gasket 113 281 9 ~8 Screw 127 144 10 *2 Reg. ss y not sold separately N * RS Models require (1). ** (1) for RS; (2) for RD RE RT; (4) for RC RQ. ~ RS Models require (4). *** For converting RD into RC or RQ. 11 1 Nameplate 122 551 12 2 Stud 127 313 13 1 Gasket 113 278 14 2 Check ss y Kit*** RC 239 541 RQ 239 536 15 8 Hi Collar Lockwasher 128 116 (RC, RQ only) 16 8 Screw (RC, RQ only) 127 606 MK8-10
M R K 8 M a r k 8 v a l v e / s p e e d c o n t r o l / r e g u l a t o r a s s e m b l y EXMLE Screw ssembly #127 212 Electrical lug 081S402K Single solenoid valve unit with plugs and extra long mounting screws for use with speed control Extended lug #230 276 (2) Studs #127 313 082RS135U NTF single pressure regulator (10 130 SIG) with extended plug receptacle and speed control sandwich mounted on an individual base with side ports and common exhaust EXMLE ORDER: Valve: 081S402K 120/60 Regulator: 082RS135U SSEMLED R e g u l a t o r k i t s R e g u l a t o r s e r v i c e k i t 229 668* 1 2 3 4 5 6 11 12 13 7 8 9 10 14 NOT TO SCLE RESSURE RNGE SIG REQ D RT NME 3 30 5 60 10 130 1 1 Regulator ssembly Not Sold Separately *2 1 Retainer 116 310 116 310 116 310 *3 1 Spring 115 226 115 226 115 226 *4 1 oppet ssembly 221 123 221 123 221 123 *5 1 oppet Seat 124 148 124 148 124 148 *6 1 Diaphragm ss y 213 302 213 302 213 302 *7 1 Washer 116 312 116 312 116 312 8 1 onnet Spring 115 211 115 212 115 213 *9 1 Spring Guide 116 293 116 293 116 293 10 1 onnet 125 342 125 342 125 342 11 1 Locknut 128 177 128 177 128 177 12 1 ressure Label 122 508 122 509 122 510 13 1 Knob ssembly 213 284 213 284 213 284 14 Regulator Gauges 214 116 214 117 214 103 (with SIG of...) (0 60) (0 100) (0 160) Regulator Unit Kits 229 696 229 697 229 698 (includes reg. assembly, gaskets, screws) * Indicates all parts included in regulator service kit. J u m p e r p l a t e k i t 229 685 (includes gasket #113 435 and screw assembly #127 144) R E t o p j u m p e r p l a t e k i t 229 686 (includes gasket #113 278 and screw assembly #127 235)
M a n i f o l d a c c e s s o r y k i t s E n d p l a t e k i t s NTF 229 691 G Tap 229 938 G Tap 239 529 G galleries/metric conduit G galleries/ntf conduit RT NUMER G Tap G Tap REQ D RT NME w/metric w/ntf NTF conduit conduit *1 Gasket 113 280 113 280 113 280 *1 Right End late 104 228 104 275 104 466 *1 Left End late 104 227 104 276 104 467 *2 Screws 127 103 127 103 127 103 * indicates parts included in kit l a n k s t a t i o n p l a t e 229 686 (includes gasket #113 278 and screw assembly #127 235) l o c k i n g d i s c k i t 229 994 (includes O ring seal #126 204) d a p t o r k i t s w i t h e n d p l a t e s Mark 8 left end plate Mark 8 RIGHT of Mark 15 kit 229 693 Mark 8 (when viewed from the cylinder ports of assembly) includes Kit #229 692 (Mark 8 adaptor, screws, seals) Mark 8 + Mark 8 right end plate + Mark 15 left end plate + screw assembly Mark 8 to 15 adaptor Mark 8 LEFT of Mark 15 kit 229 695 Mark 15 (when viewed from the cylinder ports of assembly) includes Kit #229 694 (Mark 8 adaptor, screws, seals) + Mark 8 left end plate + Mark 15 right end plate Mark 15 + screw assembly Mark 15 right end plate S p e e d c o n t r o l k i t 229 667 Cv = 1.5 (MUST order extended plug, #230 276 with kit). Used with Type RS regulator. Mounts between valve and base C 5 REQ D RT NME RT *1 1 Gasket 113 278 *2 2 Screw ssembly 127 212 *3 1 Speed Control ss y not sold separately *4 2 Metering Screw 213 219 2 3 4 5 1 Extended lug 230 276 Harness ssembly D 1 Dimn. C D inches 2.75 2.35 1.33 0.60 (mm) (70) (59.7) (33.8) (15.3)
M R K 8 a s e a s s e m b l y k i t s 1 2 3 4 6 7 REQ D RT NME RT *1 1 ase not sold separately *2 2 Screw 127 176 *3 1 Washer 128 162 *4 1 Screw 127 318 *5 1 lug receptacle std.: 230 274 for use w/speed ctl.: 230 276 *6 1 Conduit Cover ss y 205 309 5 * indicates parts included in kit. ** Not used on 3, 3C; # plugs vary Consult factory. SE NTF NTF G G TYE No lug Std lug S.C.lug No lug Std lug S.C.lug No lug Std lug S.C.lug No lug Std lug S.C.lug 31 & 35 203 429 203 437 203 445 203 433 203 441 203 449 203 671 203 672 203 673 203 558 203 556 203 674 32 & 36 203 430 203 438 203 446 203 434 203 442 203 450 203 675 203 677 203 678 203 676 203 693 203 679 3 & 3C 203 427 203 435 203 443 203 431 203 439 203 447 203 680 203 682 203 684 203 687 203 649 203 685 3 & 3D 203 428 203 436 203 444 203 432 203 440 203 448 203 686 203 688 203 690 203 687 203 689 203 691 F l e x i b l o k m a n i f o l d k i t s 5 6 7 REQ D RT NME RT *1 1 Gasket 113 280 *2 1 Valve blok not sold separately. *3 2 Nut 128 128 1 *4 2 Screw 127 103 *5 2 Screw 127 176 2 8 10 *6 1 Washer 128 162 *7 1 Conduit Cover ss y 205 303 *8 1 Screw 127 318 9 *9 1 lug receptacle std.: 230 274 for use w/speed ctl.: 230 276 3 * indicates parts included in kit. 4 FLEXI NTF NTF G G LOK No lug Std lug S.C.lug No lug Std lug S.C.lug No lug Std lug S.C.lug No lug Std lug S.C.lug 15* 229 669 229 675 229 681 229 670 229 676 229 682 239 385 229-945 239 945 239 386 239-386 229-936 239 936 229-937 239 937 239 387 15+botm 229 671 229 677 229 683 229 672 229 678 229 684 239 388 239 390 239 392 239 389 239 391 239 393 16* 229 756 229 759 229 762 229 765 239 394 239 396 239 385 239 397 1* 229 757 229 760 229 763 229 766 239 402 239 404 239 403 239 405 18* 229 758 229 761 229 764 229 767 239 398 239 400 239 399 239 401 *See page 6 for description of Flexilok manifolds.
V a l v e s e r v i c e k i t s & p a r t s Kit No. MK8 K1* (for models 081S4, 082S4) Kit No. MK8 K2* (for models 081SS4, 082SS4) 1 2 3 4 5 6 7 8 9 10 11 12 13 1 2 3 4 5 6 7 8 9 10 11 REQ D 14 15 16 RT NME RT 1 1 Spring Cover ssembly 204 258 * 2 1 Spring Retainer 116 305 * 3 1 Spring 115 117 4 1 Valve ody not sold separately 5 1 Sleeve ssembly w/seals 209 263 * 6 6 Seals 126 202 7 2 Screw 127 211 8 1 Nameplate 122 936 9 1 Receptacle Housing 125 331 * 10 1 Detent ody 110 114 * 11 1 Gasket soln/valve 113 276 12 1 Solenoid Capsule see chart * 13 1 Gasket soln/end cap 113 277 * 14 1 Gasket valve/base 113 278 15 1 Screw 127 318 16 1 3 Wire lug ssembly 230 267 REQ D 12 RT NME 13 14 RT 1 2 Solenoid ssembly see chart * 2 2 Gasket soln/valve 113 276 * 3 1 Spacer 116 306 4 1 Valve ody not sold separately 5 1 Sleeve ssembly w/seals 209 264 * 6 6 Seals 126 202 7 2 Screw 127 211 8 1 Nameplate 122 936 9 2 Receptacle Housing 125 331 * 10 1 Detent ssembly 210 118 * 11 2 Gasket soln/end cap 113 277 * 12 1 Gasket valve/base 113 278 13 1 Screw 127 318 14 1 5 Wire lug ssembly 230 268 Kit No. MK8 K3* (for models 081SS5, 082SS5) Kit No. MK8 K3* (for models 081SS6, 082SS6) 1 2 3 4 5 6 7 8 9 10 11 12 13 1 2 3 4 5 6 7 8 9 10 11 12 13 REQ D RT NME 14 15 16 RT 1 2 Solenoid ssembly see chart * 2 2 Gasket soln/valve 113 276 * 3 1 Spacer 116 307 * 4 2 Spring 115 221 * 5 2 Spring Retainer 116 309 6 1 Valve ody not sold separately 7 1 Sleeve ssembly w/seals 209 265 * 8 6 Seals 126 202 9 2 Screw 127 211 10 1 Nameplate 122 936 11 2 Receptacle Housing 125 331 * 12 1 Spacer 116 308 * 13 2 Gasket soln/end cap 113 277 * 14 1 Gasket valve/base 113 278 15 1 Screw 127 318 16 1 5 Wire lug ssembly 230 268 REQ D 14 15 16 RT NME RT 1 2 Solenoid ssembly see chart * 2 2 Gasket soln/valve 113 276 * 3 1 Spacer 116 307 * 4 2 Spring 115 221 * 5 2 Spring Retainer 116 309 6 1 Valve ody not sold separately 7 1 Sleeve ssembly w/seals 209 266 * 8 6 Seals 126 202 9 2 Screw 127 211 10 1 Nameplate 122 936 11 2 Receptacle Housing 125 331 * 12 1 Spacer 116 308 * 13 2 Gasket soln/end cap 113 277 * 14 1 Gasket valve/base 113 278 15 1 Screw 127 318 16 1 5 Wire lug ssembly 230 268 * indicates all parts included in service kit. Spool & sleeve assembly sold as precision matched set; spools are not interchangeable; and assemblies include (6) #126 202 seals.
M R K 8 S o l e n o i d a s s e m b l i e s C o m p l e t e s o l e n o i d c a p s u l e a s s e m b l i e s includes end cap + solenoid + screws and gaskets. VOLTGE DC E n d c a p o n l y LIGHT OTION DC Override Valve lug in 110 115/50 200 230/50 Type Function Style 110 120/60 220 240/60 24/50 60 12VDC 24VDC 100 130V 200 260V 8 13VDC 14 24VDC 2 osition Std. w/light 237 415 237 416 237 423 226 591 226 592 204 252 204 253 204 304 204 305 Flush 2 osition DIN no light 237 427 237 428 237 429 226 628 226 629 non locking 3 osition Std. w/light 237 417 237 418 237 424 226 595 226 596 204 254 204 255 204 308 204 309 3 osition DIN no light 237 430 237 431 237 432 226 632 226 633 Flush locking 2 osition Std. w/light 237 451 237 452 237 453 226 611 226 612 204 272 204 273 204 290 204 291 Ext. knurled 2 osition Std. w/light 237 454 237 455 237 456 226 619 226 620 204 270 204 271 204 298 204 299 rod locking S o l e n o i d s o n l y less end cap; screws and gaskets not included Std. lug In 228-703 228 811 228-704 228 812 228 810 228-705 225 284 225 285 DIN lug In 228 675 228 676 228 677 225 238 225 239 E n d c a p o n l y NO LIGHT Flush non locking std. plug 2 position 204 250 Flush non locking std. plug 3 position 204 251 Flush locking std. plug 2 position 204 269 Extended knurled rod locking std. 2 position 204 268 1 2 3 4 5 6 S e r v i c e p a r t s REQ D RT NME RT 7 8 Flush Non Locking override w/light Standard 1 1 Gasket soln/valve 113 276 2 1 Solenoid ssembly see chart 3 1 Gasket end cap/soln 113 277 4 1 umper: lack for 2 osition 114 138 Red for 3 osition 114 139 5 1 O Ring Seal 126 144 6 1 Light ssembly: 100 115/50 230 235 110 120/60 230 235 200 230/50 230 236 220 240/60 230 236 12VDC 230 283 24VDC 230 284 7 2 Solenoid Screws 127 314 Solenoid Screws DC 127 316 8 2 End Cap Screws 127 315 Flush Locking override w/light (dd option 011 to model no.) Example: 081S400K011 Extended Knurled Rod Locking override w/light (dd option 011Z to model no.) Example: 081S400K011Z l u g a s s e m b l i e s S u p e r s t r u c t u r e p l u g w i t h c o r d er DIN Spec. No. 43650 er DIN Spec. No. 43650 ccepts cable dia..310.410 For plug in solenoids wiring options 2 & 4, order cord separately. art Name art No. art Name art No. 1.04 (26.4) Grey () lug. ss y. 230 369 1.06 lug with 4 Cord 230 213 (26.8) lack () lug ss y. 230 370 lug with 6 Cord 230 215 lug with 24VDC Light 230 371 lug with 110V Light 230 372 lug with 220V Light 230 373 dimensions = inches (in parenthesis = mm)