Pre-Cut Ready to Install Kits Year Make Model Specific

1963-76 MOPAR Muscle A-Body, B-Body, C-Body, E-Body Roof to Road Solutions to Control Passenger Cabin Noise, Vibration and Heat Reduce Road Noise Reduce Exhaust Harmonics Eliminate Mechanical Noise Stop Body Panel Vibration Reduce Radiated Reflected Heat Stop Audio System Vibration Pre-Cut Ready to Install Kits Year Make Model Specific The Coolest Cars Have QuietRIDE Inside! Kits are available for these Vehicles See AcoustiTrunk Catalog Roof Kit Roof Quarter Panels above beltline. Firewall Insulator Fits under dash against the firewall bulkhead. Trunk Floor Kit Trunk Floor Tire Well Kits are available for these Vehicles See AcoustiHood Catalog Door Kit All Doors Floor Kit Front Floor, Rear Floor, Transmission Hump/ Driveline Cowl Kit Panels between the firewall and front door of the Everything in One Box to Do the Job Right! Pre-Cut, Ready To install Kits are Year, Make and Model Specific and include: Dynamat Xtreme Heat Shield Barrier Insulation Spray Adhesive Seam Tape Illustrated Instructions Order Line: 888-777-3410 Tech Line: 209-942-4777 Fax: 209-942-4476 6507 Pacific Ave. Ste. #334 Stockton, CA 95207 For more information contact us at: info@quietride.com 2003-19 Prices Subject to Change Without Notice

1963-76 MOPAR Muscle A-Body, B-Body, C-Body, E-Body Roof to Road Solutions to Control Passenger Cabin Noise, Vibration and Heat Introducing a multi-stage, automotive insulation and sound damping system to give Mopar cars the quiet riding comfort found in today s new cars. AcoustiSHIELD kits are designed on current stateof-the-art auto acoustic technology, to insulate and control the noise, vibration and heat in the assenger cabin. Kits are pre-cut and come with easy-to-follow installation instructions-----everything you need to do the job right.

Underhood Cover and Insulation MOPAR Chrysler - Dodge Plymouth Smooth Hood Covers For Restoration - 3-D Molded Hood Covers For That Custom Look Under Hood Covers are manufactured to cover the structural ribs on the under side of the hood surface of your vehicle to give a clean, finished look to the engine compartment. Tough, High Temperature ABS Cover with HeatShield Insulation Panels Pre-Cut, Ready to Install Kits Mounting Pins and Illustrated Instructions included Year, Make and Model Specific A-Body Cars--Dodge Dart, Demon, Swinger A-Body Cars--Plymouth Barracuda, cuda, Duster, Scamp, Valiant B-Body Cars--Dodge Charger, Coronet, Dart, Polara, Super Bee B-Body Cars--Plymouth Belvedere, Fury, GTX, Road Runner, Savoy, Satellite, Sport Fury, Sebring C-Body Cars--Dodge Custom 880, Monaco, Polara C-Body Cars--Plymouth Fury, Sport Fury C-Body Cars--Chrysler 300, New Yorker, Newport E-Body Cars--Dodge and Plymouth Barracuda, cuda, Challenger Watch our How To video on the Installation of a typical Under Hood Cover and Insulation Go to: youtube.com/quietridesolutions MOPAR, JEEP, DODGE, HEMI, PLYMOUTH, RAM, SRT, CHRYSLER and related logos, vehicle model names and trade dress are trademarks of Chrysler Group LLC used under licenseby QuietRide Solutions LLC. 2019 Chrysler Group LLC. For more information contact us at: info@quietride.com 2003-19 Prices Subject to Change Without Notice Order Line: 888-777-3410 Tech Line: 209-942-4777 Fax: 209-942-4476 6507 Pacific Ave. Ste. #334 Stockton, CA 95207

1963-76 MOPAR Muscle A-Body, B-Body, C-Body, E-Body 1935-2014 Ram/Dodge Truck Catalog Roof to Road Solutions to Control Passenger Cabin Noise, Vibration and Heat MOPAR A-Body Cars 1963-1976 Dodge Dart, Duster, Swinger-Plymouth Valiant and Barracuda Inventory # Description Price 1963-66 MOPAR A-Body Coupe MOPAR-A 6366-CAK 1963-66 Mopar A-Body Coupe Complete Kit 775 MOPAR-A 6366-CBPK 1963-66 Mopar A-Body Coupe 146 MOPAR-A 6366-CCK 1963-66 Mopar A-Body Coupe Cowl Kit 58 MOPAR-A 6366-CFK 1963-66 Mopar A-Body Coupe Floor Kit 261 MOPAR-A 6366-CRK 1963-66 Mopar A-Body Coupe Roof Kit 146 MOPAR-A 6366-CTK 1963-66 Mopar A-Body Coupe 146 ASU-DDBIK-2 Universal 2 Door Damper Kit 67 1963-66 MOPAR-A Body Convertible MOPAR-A 6366-CVAK 1963-66 Mopar A-Body Convert Complete Kit 639 MOPAR-A 6366-CVBPK 1963-66 Mopar A-Body Convert 146 MOPAR-A 6366-CVCK 1963-66 Mopar A-Body Convert Cowl Kit 58 MOPAR-A 6366-CVFK 1963-66 Mopar A-Body Convert Floor Kit 261 MOPAR-A 6366-CVTK 1963-66 Mopar A-Body Convert 146 ASU-DDBIK-2 Universal 2 Door Damper Kit 67 1963-66 MOPAR-A Body Fastback MOPAR-A 6366-FBAK 1963-66 Mopar A-Body FB Complete Kit 792 MOPAR-A 6366-FBBPK 1963-66 Mopar A-Body FB 163 MOPAR-A 6366-FBCK 1963-66 Mopar A-Body FB Cowl Kit 58 MOPAR-A 6366-FBFK 1963-66 Mopar A-Body FB Floor Kit 261 MOPAR-A 6366-FBRK 1963-66 Mopar A-Body FB Roofl Kit 146 MOPAR-A 6366-FBTK 1963-66 Mopar A-Body FB 146 ASU-DDBIK-2 Universal 2 Door Damper Kit 67 1963-66 MOPAR-A Body Sedan MOPAR-A 6366-SAK 1963-66 Mopar A-Body Sedan Complete Kit 822 MOPAR-A 6366-SBPK 1963-66 Mopar A-Body Sedan 131 MOPAR-A 6366-SCK 1963-66 Mopar A-Body Sedan Cowl Kit 58 MOPAR-A 6366-SFK 1963-66 Mopar A-Body Sedan Floor Kit 261 MOPAR-A 6366-SRK 1963-66 Mopar A-Body Sedan Roof Kit 146 MOPAR-A 6366-STK 1963-66 Mopar A-Body Sedan 146 ASU-DDBIK-4 Universal 4 Door Damper Kit 131 1967-69 MOPAR-A Body Coupe MOPAR-A 6769-CAK 1967-1969 Mopar A Body Coupe Complete Kit 775 MOPAR-A 6769-CBPK 1967-1969 Mopar A Body Coupe 146 MOPAR-A 6769-CCK 1967-1969 Mopar A Body Coupe Cowl Kit 58 MOPAR-A 6769-CFK 1967-1969 Mopar A Body Coupe Floor Kit 261 MOPAR-A 6769-CRK 1967-1969 Mopar A Body Coupe Roof Kit 146 MOPAR-A 6769-CTK 1967-1969 Mopar A Body Coupe 146 ASU-DDBIK-2 Universal 2 Door Damper Kit 67 1967-69 MOPAR A Body Convertible MOPAR-A 6769-CVAK 1967-1969 Mopar A Body Convert Complete Kit 639 MOPAR-A 6769-CVBPK 1967-1969 Mopar A Body Convert 146 MOPAR-A 6769-CVCK 1967-1969 Mopar A Body Convert Cowl Kit 58 MOPAR-A 6769-CVFK 1967-1969 Mopar A Body Convert Floor Kit 261 MOPAR-A 6769-CVTK 1967-1969 Mopar A Body Convert 146 ASU-DDBIK-2 Universal 2 Door Damper Kit 67 1967-69 MOPAR-A Body Fastback MOPAR-A 6769-FBAK 1967-1969 Mopar A-Body FB Complete Kit 792 MOPAR-A 6769-FBBPK 1967-1969 Mopar A-Body FB 163 MOPAR-A 6769-FBCK 1967-1969 Mopar A-Body FB Cowl Kit 58 MOPAR-A 6769-FBFK 1967-1969 Mopar A-Body FB Floor Kit 261 MOPAR-A 6769-FBRK 1967-1969 Mopar A-Body FB Roof Kit 146 MOPAR-A 6769-FBTK 1967-1969 Mopar A-Body FB 146 ASU-DDBIK-2 Universal 2 Door Damper Kit 67 1967-69 MOPAR-A Body Sedan MOPAR-A 6769-SAK 1967-1969 Mopar A Body Sedan Complete Kit 822 MOPAR-A 6769-SBPK 1967-1969 Mopar A Body Sedan 131 MOPAR-A 6769-SCK 1967-1969 Mopar A Body Sedan Cowl Kit 58 MOPAR-A 6769-SFK 1967-1969 Mopar A Body Sedan Floor Kit 261 MOPAR-A 6769-SRK 1967-1969 Mopar A Body Sedan Roof Kit 146 MOPAR-A 6769-STK 1967-1969 Mopar A Body Sedan 146 ASU-DDBIK-4 Universal 4 Door Damper Kit 131 1970-76 MOPAR-A Body Coupe MOPAR-A 7076-CAK 1970-1976 Mopar A Body Coupe Complete Kit 817 MOPAR-A 7076-CBPK 1970-1976 Mopar A Body Coupe 146 MOPAR-A 7076-CCK 1970-1976 Mopar A Body Coupe Cowl Kit 101 MOPAR-A 7076-CFK 1970-1976 Mopar A Body Coupe Floor Kit 261 MOPAR-A 7076-CRK 1970-1976 Mopar A Body Coupe Roof Kit 146 MOPAR-A 7076-CTK 1970-1976 Mopar A Body Coupe 146 ASU-DDBIK-2 Universal 2 Door Damper Kit 67

Inventory # Description Price Inventory # Description Price 1970-76 MOPAR-A Body Convertible MOPAR-A 7076-CVAK 1970-1976 Mopar A Body Convert Complete Kit 681 MOPAR-A 7076-CVBPK 1970-1976 Mopar A Body Convert 146 MOPAR-A 7076-CVCK 1970-1976 Mopar A Body Convert Cowl Kit 101 MOPAR-A 7076-CVFK 1970-1976 Mopar A Body Convert Floor Kit 261 MOPAR-A 7076-CVTK 1970-1976 Mopar A Body Convert 146 ASU-DDBIK-2 Universal 2 Door Damper Kit 67 1970-76 MOPAR-A Body Sedan MOPAR-A 7076-SAK 1970-1976 Mopar A Body Sedan Complete Kit 864 MOPAR-A 7076-SBPK 1970-1976 Mopar A Body Sedan 131 MOPAR-A 7076-SCK 1970-1976 Mopar A Body Sedan Cowl Kit 101 MOPAR-A 7076-SFK 1970-1976 Mopar A Body Sedan Floor Kit 261 MOPAR-A 7076-SRK 1970-1976 Mopar A Body Sedan Roof Kit 146 MOPAR-A 7076-STK 1970-1976 Mopar A Body Sedan 146 ASU-DDBIK-4 Universal 4 Door Damper Kit 131 MOPAR-B Body Cars 1968-1977 Charger, Cornet, Superbee, GTX, Belevedere, Road Runner 1968-70 MOPAR B-Body Coupe MOPAR-B 6870-CAK 1968-70 Mopar B-Body Coupe Complete Kit 775 MOPAR-B 6870-CBPK 1968-70 Mopar B-Body Coupe 146 MOPAR-B 6870-CCK 1968-70 Mopar B-Body Coupe Cowl Insualtion Kit 58 MOPAR-B 6870-CFK 1968-70 Mopar B-Body Coupe Floor Kit 261 MOPAR-B 6870-CRK 1968-70 Mopar B-Body Coupe Roof Kit 146 MOPAR-B 6870-CTK 1968-70 Mopar B-Body Coupe 146 ASU-DDBIK-2 Universal 2 Door Damper Kit 67 1968-70 MOPAR B-Body Convertible MOPAR-B 6870-CVAK 1968-70 Mopar B-Body Convert Complete Kit 639 MOPAR-B 6870-CVBPK 1968-70 Mopar B-Body Convert 146 MOPAR-B 6870-CVCK 1968-70 Mopar B-Body Convert Cowl Kit 58 MOPAR-B 6870-CVFK 1968-70 Mopar B-Body Convert Floor Kit 261 MOPAR-B 6870-CVTK 1968-70 Mopar B-Body Convert 146 ASU-DDBIK-2 Universal 2 Door Damper Kit 67 1968-70 MOPAR B-Body Sedan MOPAR-B 6870-SAK 1968-70 Mopar B-Body Sedan Complete Kit 822 MOPAR-B 6870-SBPK 1968-70 Mopar B-Body Sedan 131 MOPAR-B 6870-SCK 1968-70 Mopar B-Body Sedan Cowl Kit 58 MOPAR-B 6870-SFK 1968-70 Mopar B-Body Sedan Floor Kit 261 MOPAR-B 6870-SRK 1968-70 Mopar B-Body Sedan Roof Kit 146 MOPAR-B 6870-STK 1968-70 Mopar B-Body Sedan Trunk Floor Kit 146 ASU-DDBIK-4 Universal 4 Door Damper Kit 131 1971-74 MOPAR-B Body Coupe MOPAR-B 7174-CAK 1971-1974 Mopar B-Body Coupe Complete Kit 775 MOPAR-B 7174-CBPK 1971-1974 Mopar B-Body Coupe 146 MOPAR-B 7174-CCK 1971-1974 Mopar B-Body Coupe Cowl Kit 58 MOPAR-B 7174-CFK 1971-1974 Mopar B-Body Coupe Floor Kit 261 MOPAR-B 7174-CRK 1971-1974 Mopar B-Body Coupe Roof Kit 146 MOPAR-B 7174-CTK 1971-1974 Mopar B-Body Coupe 146 ASU-DDBIK-2 Universal 2 Door Damper Kit 67 1971-74 MOPAR-B Body Sedan MOPAR-B 7174-SAK 1971-74 Mopar B-Body Sedan Complete Kit 822 MOPAR-B 7174-SBPK 1971-74 Mopar B-Body Sedan 131 MOPAR-B 7174-SCK 1971-74 Mopar B-Body Sedan Cowl Kit 58 MOPAR-B 7174-SFK 1971-74 Mopar B-Body Sedan Floor Kit 261 MOPAR-B 7174-SRK 1971-74 Mopar B-Body Sedan Roof Kit 146 MOPAR-B 7174-STK 1971-74 Mopar B-Body Sedan 146 ASU-DDBIK-4 Universal 4 Door Damper Kit 131 1975-77 MOPAR-B Body Coupe MOPAR-B 7577-CAK 1975-1977 Mopar B-Body Coupe Complete Kit 776 MOPAR-B 7577-CBPK 1975-1977 Mopar B-Body Coupe 146 MOPAR-B 7577-CCK 1975-1977 Mopar B-Body Coupe Cowl Kit 58 MOPAR-B 7577-CFK 1975-1977 Mopar B-Body Coupe Floor Kit 261 MOPAR-B 7577-CRK 1975-1977 Mopar B-Body Coupe Roof Kit 146 MOPAR-B 7577-CTK 1975-1977 Mopar B-Body Coupe 146 ASU-DDBIK-2 Universal 2 Door Damper Kit 67 1975-77 MOPAR-B Body Sedan MOPAR-B 7577-SAK 1975-1977 Mopar B-Body Sedan Complete Kit 823 MOPAR-B 7577-SBPK 1975-1977 Mopar B-Body Sedan 131 MOPAR-B 7577-SCK 1975-1977 Mopar B-Body Sedan Cowl Kit 58 MOPAR-B 7577-SFK 1975-1977 Mopar B-Body Sedan Floor Kit 261 MOPAR-B 7577-SRK 1975-1977 Mopar B-Body Sedan Roof Kit 146 MOPAR-B 7577-STK 1975-1977 Mopar B-Body Sedan 146 ASU-DDBIK-4 Universal 4 Door Damper Kit 131 MOPAR C Body Cars 1965-1968 Chrysler 300, Fury, Polara, Newport, New Yorker, Monaco 1965-68 MOPAR-C Body Coupe MOPAR-C 6568-CAK 1965-1968 Mopar C-Body Coupe Complete Kit 817 MOPAR-C 6568-CBPK 1965-1968 Mopar C-Body Coupe 146 MOPAR-C 6568-CCK 1965-1968 Mopar C-Body Coupe Cowl Kit 101 MOPAR-C 6568-CFK 1965-1968 Mopar C-Body Coupe Floor Kit 261 MOPAR-C 6568-CRK 1965-1968 Mopar C-Body Coupe Roof Kit 146 MOPAR-C 6568-CTK 1965-1968 Mopar C-Body Coupe 146 ASU-DDBIK-2 Universal 2 Door Damper Kit 67

1965-68 MOPAR-C Body Convertible MOPAR-C 6568-CVAK 1965-1968 Mopar C-Body Convert Complete Kit 681 MOPAR-C 6568-CVBPK 1965-1968 Mopar C-Body Convert 146 MOPAR-C 6568-CVCK 1965-1968 Mopar C-Body Convert Cowl Kit 101 MOPAR-C 6568-CVFK 1965-1968 Mopar C-Body Convert Floor Kit 261 MOPAR-C 6568-CVTK 1965-1968 Mopar C-Body Convert 146 ASU-DDBIK-2 Universal 2 Door Damper Kit 67 1965-68 MOPAR-C Body Sedan MOPAR-C 6568-SAK 1965-1968 Mopar C-Body Sedan Complete Kit 864 MOPAR-C 6568-SBPK 1965-1968 Mopar C-Body Sedan 131 MOPAR-C 6568-SCK 1965-1968 Mopar C-Body Sedan Cowl Kit 101 MOPAR-C 6568-SFK 1965-1968 Mopar C-Body Sedan Floor Kit 261 MOPAR-C 6568-SRK 1965-1968 Mopar C-Body Sedan Roof Kit 146 MOPAR-C 6568-STK 1965-1968 Mopar C-Body Sedan 146 ASU-DDBIK-4 Universal 4 Door Damper Kit 131 Other MOPAR 1965-68 C-Body Products (Sold Separately) MOPAR-C 6568-AC 1965-1968 Mopar C-Body Firewall (Factory AC) 155 MOPAR-C 6568-HC 1965-1968 Mopar C-Body Firewall (Heater only) 155 MOPAR-C 6568-CSD 1965-1968 Mopar C-Body Coupe Seat Divider 104 MOPAR-C 6568-CVSD 1965-1968 Mopar C-Body Convert Seat Divider 92 MOPAR E Body Cars 1970-1974 Challenger and Barracuda 1970-74 MOPAR-E Body Coupe MOPAR-E 7074-CAK 1970-74 Mopar E-Body Coupe Complete Kit 775 MOPAR-E 7074-CBPK 1970-74 Mopar E-Body Coupe 146 MOPAR-E 7074-CCK 1970-74 Mopar E-Body Coupe Cowl Kit 58 MOPAR-E 7074-CFK 1970-74 Mopar E-Body Coupe Floor Kit 261 MOPAR-E 7074-CRK 1970-74 Mopar E-Body Coupe Roof Kit 146 MOPAR-E 7074-CTK 1970-74 Mopar E-Body Coupe 146 ASU-DDBIK-2 Universal 2 Door Damper Kit 67 1970-74 MOPAR-E Body Convertible MOPAR-E 7074-CVAK 1970-74 Mopar E-Body Convert Complete Kit 639 MOPAR-E 7074-CVBPK 1970-74 Mopar E-Body Convert 146 MOPAR-E 7074-CVCK 1970-74 Mopar E-Body Convert Cowl Kit 58 MOPAR-E 7074-CVFK 1970-74 Mopar E-Body Convert Floor Kit 261 MOPAR-E 7074-CVTK 1970-74 Mopar E-Body Convert 146 ASU-DDBIK-2 Universal 2 Door Damper Kit 67 1071-71 Dodge Polara DODGE 7172-PT 1971-1972 Dodge Polara Package Tray 129 1960-76 MOPAR A Body Car Firewall Insulator Panels The Firewall bulkhead in 1960s and 1970 s MOPAR cars was commonly shared across Dodge and Plymouth A Body production lines. Dodge---Dart, Demon and Lancer Plymouth---Barracuda, Duster, Scamp and Valiant 1971-74 MOPAR B Body Car Firewall Insulator Panels The Firewall bulkhead in 1960s and 1970 s MOPAR cars was commonly shared across Dodge and Plymouth B Body production lines. Charger, Coronet, Dart, Magnum, Monaco and Polara Belvedere, Fury, GTX, Road Runner, Satellite and Savoy 1965-72 MOPAR C Body Car Firewall Insulator Panels The Firewall bulkhead in 1960s and 1970 s MOPAR cars was commonly shared across Chrysler, Dodge and Plymouth C Body production lines. Imperial, New Yorker, Newport, 300 and Town and Country Monaco, Polara and 880 Fury, Gran Fury and VIP 1970-74 MOPAR E Body Car Firewall Insulator Panels The Firewall bulkhead in 1970 s MOPAR cars was commonly shared across Dodge and Plymouth E Body production lines. Challenger, Baracuda and Cuda

The barrier between your engine noise and heat and YOU. Every Quiet Ride Firewall Insulator product is based on an out-the-car or truck original provided by a customer to us over the years. We now manufacture more that 600 different firewall products--1927 through 1996--from the molds that we have developed to fit the OEM engine setback and transmission hump of each Firewall insulator panels are year -makemodel specific; vacuum formed from a variety of materials; digitally cut to exacting specifications and come fully insulated and ready-to-install. They fit the firewall bulkhead like a glove and have earned the reputation--- Concours Quality. Here is a Head-to-Head Comparison between the typical $69 firewall insulator and a QRS Firewall Insulator. Firewall Insulator is not authentic to OEM specifications. Die-Cut from flat rubber or cardboard material--no defined texture. Holes don t line up to fit over the engine setback hump or other firewall contours. Material cracks or breaks when shipped or handled. Material is easily soiled, bruised and scuffed by feet. Insulator is a bummer to install because it will not fit over the compound curves of the firewall set-back or transmission hump. Product fits like a square peg in a round hole. Firewall Insulator exceeds OEM specifications. Molded from well defined textured ABS material (Chicken Track or Leather Grain) or a High Definition Satchel finish vinyl rubber material. Holes line up every time because it is molded. ABS Material is flexible, yet ridgid, soil and scuff resistant. High Def Vinyl Rubber is soil and scuff resistent. Insulator is easy to install because it is designed for each specific vehicle to fit over firewall set-back and transmission hump. Product Fits Like a Glove. Leather Grain ABS Texture with Fiberglass Ford-GM-Chrysler-AMC 1949-mid 1970 s The Leather Grain texture was used on firewall insulator coves by General Motors, Chrysler, American Motors and Willys/Jeep and Ford Vehicles from 1949 through mid- 1970s. It replaces the traditional hot-stamped oil laminated tar paper board used for the firewall insulator cover along with a combination of insulation materials including horse hair, cardboard and the fluffy fiberglass insulation of the 1950s, 60s. and 70s. Advanced black fiberglass material is much stronger and more dense, yet plyable, yielding a higher thermal rating than original materials. Ready to install.

Made Right - To Fit Right -- To Stop Engine Heat 1963-76 MOPAR Muscle A-Body, B-Body, C-Body, E-Body MOPAR A-Body Firewall Insulators Dodge Dart, Demon, Lancer Plymouth Barracuda, Duster, Scamp, Valiant MOPAR-A 6062-HC 1960-1962 MOPAR A-Body Firewall Insulator Panel w/heater 79 MOPAR-A 6364-HC 1963-1964 MOPAR A-Body Firewall Insulator Panel w/heater 79 MOPAR-A 6366-AC 1963-1966 MOPAR A-Body Firewall Insulator Panel w/ac 79 MOPAR-A 6566-HC 1965-1966 MOPAR A-Body Firewall Insulator Panel w/heater 79 MOPAR-A 6769-AC 1967-1969 MOPAR A-Body Firewall Insulator Panel w/ac 79 MOPAR-A 6769-HC 1967-1969 MOPAR A-Body Firewall Insulator Panel w/heater 79 MOPAR-A 7076-HC 1970-1976 MOPAR A-Body Firewall Insulator Panel w/heater 79 MOPAR-A 7076-AC 1970-1976 MOPAR A-Body Firewall Insulator Panel w/ac 79 MOPAR B-Body Firewall Insulators Dodge Charger, Coronet, Dart, Magnum, Monaco, Polara Plymouth Belevedere, Fury, GTX, Road Runner, Satellite, Savoy MOPAR-B 6264-HC 1962-1964 MOPAR B-Body Firewall Insulator Panel w/heater 79 MOPAR-B 6365-HVAC 1963-1965 MOPAR B-Body Firewall Insulator Panel Heater or AC 79 MOPAR-B 6670-AC 1966-1970 MOPAR B-Body Firewall Insulator Panel w/ac 79 MOPAR-B 6670-CPKG 1966-1970 MOPAR B-Body Coupe Package Tray 49 MOPAR-B 6670-HC 1966-1970 MOPAR B-Body Firewall Insulator Panel w/heater 79 MOPAR-B 7174-AC 1971-1974 MOPAR B-Body Firewall Insulator Panel w/ac 79 MOPAR-B 7174-CPKG 1971-1974 MOPAR B-Body Coupe Package Tray 49 MOPAR-B 7174-CSD 1971-1974 MOPAR B-Body Coupe Seat Divider 79 MOPAR-B 7174-HC 1971-1974 MOPAR B-Body Firewall Insulator Panel w/heater 79 MOPAR C-Body Firewall Insulators Polara, New Yorker, Newport, Monaco, Custom 880 MOPAR-C 6568-AC 1965-1968 MOPAR C-Body Firewall Insulator Panel w/factory AC 79 MOPAR-C 6568-CSD 1965-1968 MOPAR C-Body Coupe Seat Divider 79 MOPAR-C 6568-HC 1965-1968 MOPAR C-Body Firewall Insulator Panel w/heater 79 MOPAR-C 7172-CPKG 1971-1972 MOPAR-C Coupe Package Tray w/speaker Grills 129 MOPAR E-Body Firewall Insulators Challenger, Barracuda and Cuda MOPAR-E 7074-AC 1970-1974 MOPAR E-Body Car Firewall Insulator Panel w/ac 79 MOPAR-E 7074-HC 1970-1974 MOPAR E-Body Car Firewall Insulator Panel w/heater 79 See Firewall Insulator products at the end of this catalog.

1963-66 MOPAR A-Body Coupe MOPARA 6366-CAK Barracuda-Dart-Valiant Cowl Kit Floor Kit Roof Kit ASU-DDBIK-2 Universal 2-Door For 2-door Coupes, Convertibles, Trucks with upholstered door panels. Includes Dynamat Xtreme damper pads, Weather- Barrier Insulation, double-sided foam tape and Instructions. Easy to Install.

1963-66 MOPAR A-Body Convertible MOPARA 6366-CVAK Barracuda-Dart-Valiant Cowl Kit Floor Kit Roof Kit ASU-DDBIK-2 Universal 2-Door For 2-door Coupes, Convertibles, Trucks with upholstered door panels. Includes Dynamat Xtreme damper pads, Weather- Barrier Insulation, double-sided foam tape and Instructions. Easy to Install.

1963-66 MOPAR A-Body Sedan MOPARA 6366-SAK Dart-Valiant Cowl Kit Floor Kit Roof Kit ASU-DDBIK-4 Universal 4-Door For 4-Door Sedans with upholstered door panels. Includes Dynamat Xtreme damper pads, WeatherBarrier Insulation, doublesided foam tape and Instructions. Easy to Install.

1967-69 MOPAR A-Body Coupe MOPARA 6769-CAK Dart-Demon-Swinger-Barracuda-Valiant Cowl Kit Floor Kit Roof Kit ASU-DDBIK-2 Universal 2-Door For 2-door Coupes, Convertibles, Trucks with upholstered door panels. Includes Dynamat Xtreme damper pads, Weather- Barrier Insulation, double-sided foam tape and Instructions. Easy to Install.

Cowl Kit 1967-69 MOPAR A-Body Convertible MOPARA 6769-CVAK Dart-Demon-Swinger-Barracuda-Valiant Floor Kit ASU-DDBIK-2 Universal 2-Door For 2-door Coupes, Convertibles, Trucks with upholstered door panels. Includes Dynamat Xtreme damper pads, Weather- Barrier Insulation, double-sided foam tape and Instructions. Easy to Install.

1967-69 MOPAR A-Body Sedan MOPARA 6769-SAK Dart-Demon-Swinger-Valiant Cowl Kit Floor Kit Roof Kit ASU-DDBIK-4 Universal 4-Door For 4-Door Sedans with upholstered door panels. Includes Dynamat Xtreme damper pads, WeatherBarrier Insulation, doublesided foam tape and Instructions. Easy to Install.

1967-69 MOPAR A-Body Fast Back MOPARA 6769-FBAK Cowl Kit Floor Kit Roof Kit ASU-DDBIK-2 Universal 2-Door For 2-door Coupes, Convertibles, Trucks with upholstered door panels. Includes Dynamat Xtreme damper pads, Weather- Barrier Insulation, double-sided foam tape and Instructions. Easy to Install.

1970-76 MOPAR A-Body Coupe MOPARA 7076-CAK Dart-Demon-Swinger--Duster-Scamp Cowl Kit Floor Kit Roof Kit ASU-DDBIK-2 Universal 2-Door For 2-door Coupes, Convertibles, Trucks with upholstered door panels. Includes Dynamat Xtreme damper pads, Weather- Barrier Insulation, double-sided foam tape and Instructions. Easy to Install.

Cowl Kit 1970-76 MOPAR A-Body Convertible MOPARA 7076-CVAK Dart-Demon-Swinger--Duster-Scamp Floor Kit ASU-DDBIK-2 Universal 2-Door For 2-door Coupes, Convertibles, Trucks with upholstered door panels. Includes Dynamat Xtreme damper pads, Weather- Barrier Insulation, double-sided foam tape and Instructions. Easy to Install.

1970-76 MOPAR A-Body Sedan MOPARA 7076-SAK Dart-Demon-Swinger--Duster-Scamp Cowl Kit Floor Kit Roof Kit ASU-DDBIK-4 Universal 4-Door For 4-Door Sedans with upholstered door panels. Includes Dynamat Xtreme damper pads, WeatherBarrier Insulation, doublesided foam tape and Instructions. Easy to Install.

1968-70 MOPAR B-Body Coupe MOPARB 6870-CAK Charger-Coronet-Super Bee-Belevedere-GTX-Road Runner-Satellite Cowl Kit Floor Kit Roof Kit ASU-DDBIK-2 Universal 2-Door For 2-door Coupes, Convertibles, Trucks with upholstered door panels. Includes Dynamat Xtreme damper pads, Weather- Barrier Insulation, double-sided foam tape and Instructions. Easy to Install.

Cowl Kit 1968-70 MOPAR B-Body Convertible MOPARB 6870-CVAK Charger-Coronet-Belevedere-GTX-Road Runner-Satellite Floor Kit ASU-DDBIK-2 Universal 2-Door For 2-door Coupes, Convertibles, Trucks with upholstered door panels. Includes Dynamat Xtreme damper pads, Weather- Barrier Insulation, double-sided foam tape and Instructions. Easy to Install.

1968-70 MOPAR B-Body Sedan MOPARB 7076-SAK Coronet-Belevedere Cowl Kit Floor Kit Roof Kit ASU-DDBIK-4 Universal 4-Door For 4-Door Sedans with upholstered door panels. Includes Dynamat Xtreme damper pads, WeatherBarrier Insulation, doublesided foam tape and Instructions. Easy to Install.

Cowl Kit 1971-74 MOPAR B-Body Coupe MOPARB 7174-CAK Charger-Super Bee-Coronet-GTX-Road Runner-Satellite-Sebring Floor Kit Roof Kit ASU-DDBIK-2 Universal 2-Door For 2-door Coupes, Convertibles, Trucks with upholstered door panels. Includes Dynamat Xtreme damper pads, Weather- Barrier Insulation, double-sided foam tape and Instructions. Easy to Install.

Cowl Kit 1971-74 MOPAR B-Body Convertible MOPARB 7174-CVAK Charger-Coronet-GTX-Road Runner-Satellite-Sebring Floor Kit ASU-DDBIK-2 Universal 2-Door For 2-door Coupes, Convertibles, Trucks with upholstered door panels. Includes Dynamat Xtreme damper pads, Weather- Barrier Insulation, double-sided foam tape and Instructions. Easy to Install.

Cowl Kit 1971-74 MOPAR B-Body Sedan MOPARB 7174-SAK Coronet-Satellite-Sebring Floor Kit Roof Kit ASU-DDBIK-4 Universal 4-Door For 4-Door Sedans with upholstered door panels. Includes Dynamat Xtreme damper pads, WeatherBarrier Insulation, doublesided foam tape and Instructions. Easy to Install.

Cowl Kit 1975-77 MOPAR B-Body Coupe MOPARB 7577-CAK Charger-Coronet-Road Runner-Satellite Floor Kit Roof Kit ASU-DDBIK-2 Universal 2-Door For 2-door Coupes, Convertibles, Trucks with upholstered door panels. Includes Dynamat Xtreme damper pads, Weather- Barrier Insulation, double-sided foam tape and Instructions. Easy to Install.

Cowl Kit 1975-77 MOPAR B-Body Convertible MOPARB 7577-CVAK Charger-Coronet-Road Runner-Satellite Floor Kit ASU-DDBIK-2 Universal 2-Door For 2-door Coupes, Convertibles, Trucks with upholstered door panels. Includes Dynamat Xtreme damper pads, Weather- Barrier Insulation, double-sided foam tape and Instructions. Easy to Install.

Cowl Kit 1975-77 MOPAR B-Body Sedan MOPARB 7577-SAK Coronet Floor Kit Roof Kit ASU-DDBIK-4 Universal 4-Door For 4-Door Sedans with upholstered door panels. Includes Dynamat Xtreme damper pads, WeatherBarrier Insulation, doublesided foam tape and Instructions. Easy to Install.

Cowl Kit 1965-68 MOPAR C-Body Coupe MOPARC 6568-CAK Chrysler 300-New Yorker-Newport--Monaco-Polara-Fury-Sport Fury Floor Kit Roof Kit ASU-DDBIK-2 Universal 2-Door For 2-door Coupes, Convertibles, Trucks with upholstered door panels. Includes Dynamat Xtreme damper pads, Weather- Barrier Insulation, double-sided foam tape and Instructions. Easy to Install.

Cowl Kit 1965-68 MOPAR C-Body Convertible MOPARC 6568-CVAK Chrysler 300-New Yorker-Newport-Polara-Fury-Sport Fury Floor Kit ASU-DDBIK-2 Universal 2-Door For 2-door Coupes, Convertibles, Trucks with upholstered door panels. Includes Dynamat Xtreme damper pads, Weather- Barrier Insulation, double-sided foam tape and Instructions. Easy to Install.

Cowl Kit 1965-68 MOPAR C-Body Sedan MOPARC 6568-SAK Chrysler 300-New Yorker-Newport-Custom 880-Monaco-Polara-Fury Floor Kit Roof Kit ASU-DDBIK-4 Universal 4-Door For 4-Door Sedans with upholstered door panels. Includes Dynamat Xtreme damper pads, WeatherBarrier Insulation, doublesided foam tape and Instructions. Easy to Install.

Cowl Kit 1970-74 MOPAR E-Body Coupe MOPARE 7074-CAK Barracuda- cuda-challenger Floor Kit Roof Kit ASU-DDBIK-2 Universal 2-Door For 2-door Coupes, Convertibles, Trucks with upholstered door panels. Includes Dynamat Xtreme damper pads, Weather- Barrier Insulation, double-sided foam tape and Instructions. Easy to Install.

Cowl Kit 1970-74 MOPAR E-Body Convertible MOPARE 7074-CVAK Barracuda- cuda-challenger Floor Kit ASU-DDBIK-2 Universal 2-Door For 2-door Coupes, Convertibles, Trucks with upholstered door panels. Includes Dynamat Xtreme damper pads, Weather- Barrier Insulation, double-sided foam tape and Instructions. Easy to Install.

Quiet Ride Firewall Insulators and Headliners are Concours Quality Quiet Ride Firewall Insulator products manufactured with one of our period correct materials that presents a high quality, fresh look to any truck interior. Each of these firewall insulator designs are an exact reproduction of an out of the car/truck original, provided to us by one of our customers. They are vacuum form molded to the original contours. All firewalls include Period Correct Insulation and are pre-cut and ready to install with factory mounting holes punched. They will not chip or peel,or show scuff marks, absorb moisture, or expand and contract with temperature extremes. These materials can be painted with popular upholstery spray paints and wipe clean with a damp cloth. Leather Grain Texture Ford Cars and trucks, 1948 to 1979. All of our Firewall Insulator Products Can be ordered for Restoration Applications (factory Holes) or for Restomod Applications (No Holes).

1960-76 MOPAR A Body Car Firewall Insulator Panels The Firewall bulkhead in 1960s and 1970 s MOPAR cars was commonly shared across Dodge and Plymouth A Body production lines. Dodge---Dart Demon and Lancer Plymouth---Barracuda, Duster, Scamp and Valiant Compare the images in this section of the catalog with the passenger side of your firewall bulkhead to detrmine which Insulator panel most closely matches the basic hole configuration on your MOPAR-A 6062-HC 1960-62 MOPAR -A Body Car Firewall Insulator Panel w/ Heater Dodge and Plymouth Original Factory Style firewall insulator for the 1960-62 Dodge and Plymouth cars. Molded to fit the stock engine setback hump. Leather Grain Cover--ready to install with insulation. MOPAR-A 6364-HC 1963-64 MOPAR-A Body Car Firewall Insulator Panel w/ Heater Dodge and Plymouth Original Factory Style firewall insulator for the 1963-64 Dodge and Plymouth cars w/heater. Leather Grain Cover- -ready to install with insulation. MOPAR-A 6366-AC 1963-66 MOPAR-A Body Car Firewall Insulator Panel w/ Factory A/C. Dodge and Plymouth Original Factory Style firewall insulator for the 1963-66 Dodge and Plymouth cars with Factory A/C. Leather Grain Cover--ready to install with insulation. MOPAR-A 6566-HC 1965-66 MOPAR-A Body Car Firewall Insulator Panel w/ Heater Dodge and Plymouth Original Factory Style firewall insulator for the 1965-66 Dodge and Plymouth cars w/heater. Leather Grain Cover- -ready to install with insulation. Firewall Insulator can be ordered for Restoration (factory Holes) or for Restomod (No Holes).

1960-76 MOPAR A Body Car Firewall Insulator Panels The Firewall bulkhead in 1960s and 1970 s MOPAR cars was commonly shared across Dodge and Plymouth A Body production lines. Dart Demon and Lancer Barracuda, Duster, Scamp and Valiant MOPAR-A 6769-AC 1967-69 MOPAR-A Body Car Firewall Insulator Panel w/factory A/C Dodge and Plymouth Original Factory Style firewall insulator for the 1967-69 Dodge and Plymouth cars w/factory A/C. Leather Grain Cover--ready to install with insulation. MOPAR-A 7076-HC 1970-76 MOPAR -A Body Car Firewall Insulator Panel w/heater Dodge and Plymouth Original Factory Style firewall insulator for the 1970-76 Dodge and Plymouth cars w/heater. Leather Grain Cover- -ready to install with insulation. MOPAR-A 6769-HC 1967-69 MOPAR -A Body Car Firewall Insulator Panel w/ Heater Dodge and Plymouth Original Factory Style firewall insulator for the 1967-69 Dodge and Plymouth cars w/heater. Leather Grain Cover- -ready to install with insulation. MOPAR-A 7076-AC 1970-76 MOPAR -A Body Car Firewall Insulator Panel w/ Factory A/C Dodge and Plymouth Original Factory Style firewall insulator for the 1970-76 Dodge and Plymouth cars w/factory A/C. Leather Grain Cover--ready to install with insulation. Firewall Insulator can be ordered for Restoration (factory Holes) or for Restomod (No Holes).

1960-70 MOPAR B Body Car Firewall Insulator Panels The Firewall bulkhead in 1960s and 1970 s MOPAR cars was commonly shared across Dodge and Plymouth B Body production lines. Charger, Coronet, Dart, Magnum, Monaco and Polara Belvedere, Fury, GTX, Road Runner, Satellite and Savoy Compare the images in this section of the catalog with the passenger side of your firewall bulkhead to dtermine which Insulator panel matches the basic hole configuration on your MOPAR-B 6062-HC 1960-62 MOPAR-B Body Car Firewall Insulator Panel w/ Heater Dodge and Plymouth Original Factory Style firewall insulator for the 1960-62 Dodge and Plymouth cars w/heater. Leather Grain Cover- -ready to install with insulation. MOPAR-B 6365-HVAC 1963-65 MOPAR-B Body Car Firewall Insulator Panel w/ Factory Heater or A/C. Dodge and Plymouth Original Factory Style firewall insulator for the 1963-65 Dodge and Plymouth cars w/heater or Factory A/C. Leather Grain Cover--ready to install with insulation. MOPAR-B 6670-AC 1966-70 MOPAR-B Body Car Firewall Insulator Panel w/ Factory A/C. Dodge and Plymouth Original Factory Style firewall insulator for the 1966-70 Dodge and Plymouth cars w/factory A/C. Leather Grain Cover--ready to install with insulation. MOPAR-B 6670-HC 1966-70 MOPAR-B Body Car Firewall Insulator Panel w/ Heater. Dodge and Plymouth Original Factory Style firewall insulator for the 1966-70 Dodge and Plymouth cars w/heater. Leather Grain Cover- -ready to install with insulation. MOPAR-B 6670-CPKG 1966-70 MOPAR-B Body Car Coupe Package Tray. Dodge and Plymouth Original Factory Style Coupe Package Tray for the 1966-70 Dodge and Plymouth cars. Leather Grain Cover--ready to install with insulation. Firewall Insulator can be ordered for Restoration (factory Holes) or for Restomod (No Holes).

1960-70 MOPAR B Body Car Firewall Insulator Panels The Firewall bulkhead in 1960s and 1970 s MOPAR cars was commonly shared across Dodge and Plymouth B Body production lines. Charger, Coronet, Dart, Magnum, Monaco and Polara Belvedere, Fury, GTX, Road Runner, Satellite and Savoy Compare the images in this section of the catalog with the passenger side of your firewall bulkhead to dtermine which Insulator panel matches the basic hole configuration on your MOPAR-B 7174-AC 1971-74 MOPAR-B Body Car Firewall Insulator Panel w/ Factory A/C. Dodge and Plymouth Original Factory Style firewall insulator for the 1971-74 Dodge and Plymouth cars w/factory A/C. Leather Grain Cover--ready to install with insulation. MOPAR-B 7174-HC 1971-74 MOPAR-B Body Car Firewall Insulator Panel w/ Heater. Dodge and Plymouth Original Factory Style firewall insulator for the 1971-74 Dodge and Plymouth cars w/heater. Leather Grain Cover- -ready to install with insulation. MOPAR-B 7174-CPKG 1971-74 MOPAR-B Body Car Coupe Package Tray. Dodge and Plymouth Original Factory Style packaage tray for the 1971-74 Dodge and Plymouth cars. Leather Grain Cover--ready to install with insulation. MOPAR-B 7174-CSD 1971-74 MOPAR-B Body Car Coupe Seat Divider. Dodge and Plymouth Original Factory Style seat divider for the 1971-74 Dodge and Plymouth cars. Leather Grain Cover--ready to install with insulation. Firewall Insulator can be ordered for Restoration (factory Holes) or for Restomod (No Holes).

1965-72 MOPAR C Body Car Firewall Insulator Panels The Firewall bulkhead in 1960s and 1970 s MOPAR cars was commonly shared across Chrysler, Dodge and Plymouth C Body production lines. Imperial, New Yorker, Newport, 300 and Town and Country Monaco, Polara and 880 Fury, Gran Fury and VIP Compare the images in this section of the catalog with the passenger side of your firewall bulkhead to detrmine which Insulator panel matches the basic hole configuration on your MOPAR-C 6568-HC 1965-68 MOPAR-C Body Car Firewall Insulator Panel w/ Heater. Chrysler, Dodge and Plymouth Original Factory Style firewall insulator for the 1965-68 Chrysler, Dodge and Plymouth cars w/heater. Leather Grain Cover--ready to install with insulation. MOPAR-C 6568-AC 1965-68 MOPAR-C Body Car Firewall Insulator Panel w/ Factory A/C. Chrysler, Dodge and Plymouth Original Factory Style firewall insulator for the 1965-68 Chrysler, Dodge and Plymouth cars w/factory A/C. Leather Grain Cover--ready to install with insulation. MOPAR-C 6568-CSD 1965-68 MOPAR-C Body Car Coupe Seat Divider. Chrysler, Dodge and Plymouth. Original Factory Style Seat Divider for the 1965-68 Chrysler, Dodge and Plymouth cars. Leather Grain Cover--ready to install with insulation. MOPAR-C 7172-CPKG 1965-68 MOPAR-C Body Car Coupe Package Tray with Speaker Grills. Chrysler, Dodge and Plymouth. Original Factory Style Package Tray for the 1971-72 Chrysler, Dodge and Plymouth cars. Molded to fit the stock Package Shelf. Leather Grain Cover--ready to install with insulation. With Speaker Grills. Firewall Insulator can be ordered for Restoration (factory Holes) or for Restomod (No Holes).

1970-74 MOPAR E Body Car Firewall Insulator Panels The Firewall bulkhead in 1970 s MOPAR cars was commonly shared across Dodge and Plymouth E Body production lines. Challenger, Barracuda and Cuda Compare the images in this section of the catalog with the passenger side of your firewall bulkhead to detrmine which Insulator panel matches the basic hole configuration on your MOPAR-E 7074-AC 1970-74 MOPAR-E Body Car Firewall Insulator Panel w/ Factory A/C. Chrysler, Dodge and Plymouth Original Factory Style firewall insulator for the 1970-74 Dodge and Plymouth cars w/factory A/C. Leather Grain Cover--ready to install with insulation. MOPAR-E 7074-HC 1970-74 MOPAR-E Body Car Firewall Insulator Panel w/ Heater. Chrysler, Dodge and Plymouth Original Factory Style firewall insulator for the 1970-74 Dodge and Plymouth cars w/heater. Leather Grain Cover- -ready to install with insulation. Firewall Insulator can be ordered for Restoration (factory Holes) or for Restomod (No Holes).

A Roof to Road Solution to Control Passenger Cabin Noise, Vibration and Heat TM AcoustiSHIELD Product Description AcoustiShield is a two-stage thermal acoustic automotive insulation product designed to control Noise, Vibration and Heat the three major issues that affect passenger cabin comfort. Kits include pre-cut, ready-to-install Dynamat Xtreme damper pads and HeatShield Barrier Insulation panels which are packaged separately for easy installation. Kits come with uniquely illustrated installation sheets, spray adhesive and seam tape. Complete Acoustic Kits insulate the Cowl, Floor, Roof, Trunk Floor, Doors and Body Panels, which includes the seat divider, package tray and rear wheel wells. The installation of a complete AcoustiShield kit typically will reduce passenger cabin noise by 12 to 17 decibels. To put this in perspective, a 10-decibel reduction is a 50 percent reduction in noise that the human ear can easily detect. Barrier insulation will reduce radiant heat by as much as 25 degrees. AcoustiShield is a Two-Stage Process Stage-One of the AcoustiShield process is the application of small pre-cut Dynamat Xtreme damper pads and strips to auto body sheet metal to greatly reduce the vibration and noise produced by these panels from entering the passenger cabin. Stage-Two of the AcoustiShield process is the application of pre-cut HeatShield Barrier Insulation panels to the auto body sheet metal to encapsulate any remaining vibration/noise and to thermally insulate the 2003-19 Quiet Ride Solutions LLC. AcoustiSHIELD --- Quiet Ride Solutions AcoustiTRUNK --- ShowBEDDER --- AcousatiHOOD are Registered Trade Marks of Quiet Ride Solutions LLC.

Expanded NVH Reference Information: Cars and trucks make and/or absorb noise, vibration and heat (NVH) from multiple directions--including internal and external air-borne noise, structure-borne noise as well as radiant heat. NVH factors to consider: Engine NVH travels back from the front of the vehicle through the firewall and cowl. Wheel well trunk and rear body panel NVH travels forward through the seat divider and package tray panels. Roadway radiant heat, often exceeding 140 degrees, rises through vehicle floor pans. Rumbling performance exhaust systems and transmission/drive line harmonics also rise through vehicle floor pans. Direct heat from the sun penetrates the roof of the All of these influences Apex in the middle of the passenger cabin at ear level. Add the noise produced by the sound system; the air rushing through the vents from the HVAC system; and a normal conversation builds into a shouting match between the driver and passenger to overcome the harmonic drone of vehicle mechanics. AcoustiShield Photo Gallery Typical Cowl Panel Sound Dampening and Thermal Barrier Insulation. Typical Trunk Floor Sound Dampening and Thermal Barrier Insulation.

Typical Floor Panel Sound Dampening and Thermal Barrier Insulation. Typical Roof Panel Sound Dampening and Thermal Barrier Insulation. Typical Body Panel Sound Dampening and Thermal Barrier Insulation.

Made Right---Fit Right---Look Right OEM Original Products Firewall Insulator products are pre-cut and ready to install with standard OEM accessory and mounting holes punched for restoration applications. Each unit has period correct insulation. ABS Leather Grain Material Firewall Insulators are also available without holes for aftermarket HVAC systems and Street Rod and Custom installs. Ultra High Definition Vinyl Rubber Street Rod Firewall Insulator Direct Sheetmetal Absolute Sheetmetal Quick Link ABS Chicken Track Material

Product Description ABS Leather Grain Original Equipment Firewall Insulators Production Period GM and MOPAR: 1926 through 1976 Production Period FOMOCO: 1949 through 1979 Most OEMs used a leather grained firewall cover on their cars and trucks from 1926 through 1965. Each insulator product is molded with ABS material and ready-toinstall with factory stock accessory holes and mounting pin locations punched. ABS Firewall Cover Leather Grain Material Kits does not include mounting pins. Quiet Ride has an assortment of universal mounting pin styles available as needed. Mounting pins are not included but are available for separate purchase as needed. Each insulator product is molded from an out of the car original firewall for contour and accuracy. Year-Make-Model Specific. Firewall Insulators can be ordered without holes for custom applications.

Thermal Insulation Types Original Equipment Firewall Insulators General Motors Cars and Trucks Ford Cars and Trucks MOPAR Cars and Trucks Black Fiberglass Insulation Typically used in vehicles 1949 through 1977 ABS Firewall Insulators Heat Shield Barrier Insulation Typically used in vehicles 1928-48 and Vinyl Rubber Firewalls 1964-present Street Rods Custom Firewalls Concours Show Quality Authentically Correct--- Fit like a Glove ---Easy to Install All QRS Products, Materials and Craftsmanship Meet or Exceed OEM Quality Standards No customer has ever reported losing judged points on our firewall products.

Firewall Insulators--A Historical Perspective is the first line of defense against automotive Noise, Vibration and Heat that is generated in the engine bay of the QRS manufactures more than 600 firewall products for antique, classic, custom and street rod cars and trucks. The company has developed these products based on out of car original insulator pads that have been supplied by its customers. QuietRide Firewalls Insulators are exact reproductions of OEM products. Most firewall insulators made between 1928 and the mid-1960s were constructed with an oil impregnated cardboard cover in combination with a number of insulation materials. In 1964 General Motors and Ford Motor Company began using a spray-on rubber material bonded to a thin layer of shody insulation. All of the company s firewall products are vacuum form molded to fit the firewall and transmission contours exactly. They are digitized and manufactured on its Flow Water Jet Cutting System for accurate fitting. Each firewall cover is backed with period correct insulation which could include a black fiberglass or HeatShield barrier insulation. Firewall Colors and Sheen Just a word about the look of your old firewall in comparison to a new one--you may may note that the new firewall does not look the same as your original--because of the sheen. The firewall insulator in a car built in the 1930s or 40s is now at least 70-80 years old and is dirty and dingy. When the vehicle came off the assembly line, all of its component parts were crisp, clean and sparkling fresh. With few exceptions, firewall insulators were black when they came from the factory. There were some exceptions in the General Motors product line from 1933 through 1941 in which the firewall insulators were a mocha brown color. The firewall color would typically match the color of your clutch, brake and accelerator pedal rubber pads. 6507 Pacific Avenue--Ste 334 Stockton, CA 95207 Order Line: 888-777-3410 Tech Line (209) 942-4777 Fax (209) 942-4476 www.quietride.com 2003-19 Quiet Ride Solutions LLC. AcoustiSHIELD --- Quiet Ride Solutions AcoustiTRUNK --- ShowBEDDER --- AcousatiHOOD are Registered Trade Marks of Quiet Ride Solutions LLC.

Mounting Pins and Clips American Cars and Trucks used a wide variety of mounting pins, clips, buttons and screws to attach the firewall insulator to the interior of the steel firewall bulkhead. Clean up and reuse your original mounting pins if you have them. We offer the following mounting pins and information based on what we have been able to find available. UMPS-10 Universal Mounting Pins If your original firewall mounting pins are missing or damaged beyond repair, these universal pins may be a solution. They are a plastic Christmas tree type pin with a 1/2 button head that will fit most 5/16 inch holes. Kit includes 10 pins. 20 UWC-MPL-10 UWC-MPS-10 UPPS-20 FORD 3541- MPL Universal Wire Cap Mounting Pin--Long A variety of car and truck manufacturers in the 1930s-40s-50s used a wire cap retainer to mount the firewall insulator. Long shank (1/2 inch) with a 1/2 inch button head that can be painted to match the firewall color. Kit includes 10 Pins. Universal Wire Cap Mounting Pin--Short A variety of car and truck manufacturers in the 1930s-40s-50s used a wire cap retainer to mount the firewall insulator. Short shank (1/4 inch) with a 1/2 inch button head that can be painted to match the firewall color. Kit includes 10 Pins. Universal Upholstery Panel Pin Set If your original upholstery panel mounting pins are missing or damaged beyond repair, these universal pins may be a solution. They are a short-shank plastic Christmas tree type pin with a 1/2 inch head that will fit 5/16 inch holes. Kit includes 10 pins. Early Ford Firewall Mounting Pins--Long These all steel firewall mounting pins are an exact reproduction of the originals. They are in a 3/4 inch in length. The Long pin works best in the 1935-41 cars and may be used on cars through the mid-fiftys. 10 10 30 3 FORD 3541- MPS Early Ford Firewall Mounting Pin--Short These all steel firewall mounting pins are an exact reproduction of the originals. They are in a 1/2 inch in length. The short pins work best for the 1942-48 Ford cars and 1940-47 Ford trucks and may be used on trucks through the mid-fiftys. 3 FORD RB-MP Late Model Ford Firewall Mounting Pins--Rubber Bullet Style These all Rubber Bullet Style Ford mounting pins were used on FOMOCO products starting in 1969. These are an exact reproduction of the original. 3 GM 5500-MP SRMP-9 GM Firewall Plastic Firewall Mounting Plugs General Motors started using a plastic firewall mounting plug to attach the insulator to the steel firewall bulkhead in 1955 for trucks and 1957 for cars. These plugs are still used in many GM vehicles today. Street Rod Mounting Pin Kit With this new mounting pin kit, you can smooth your firewall by welding closed the firewall mounting holes and install any of our insulator panels for that smoothie look. This kit will give you the option to place the firewall mounting pins where they will fit your application best. Be sure to order your firewall insulator No Holes when you place your order. Kit Includes 9 pinsets and instructions. 3 34 R-83-56 R-07-01 Early and Mid-Year 1932 Ford Correct insulator panel to dash mounting screws for early and mid-year 1932 passenger car, wagon and sedan delivery. Per Ford Engineering release documents, the correct slotted flat head screws (1/4-20 x 1 3/16), locks, hex nuts and cup washers. Finished in black oxide. Kit includes 12 Sets (48 pieces.) Please Order directly from Roy Nacewicz Enterprises, www.fordbolts.com. Ford Original Shoulder Bolts for mid-to-late 1932 through 1935 Cars/Trucks Ford special slotted truss head shoulder screw, painted in Ford S-2 finish. Period correct insulator panel to dash Truss head/shoulder mounting bolts for midto-late 1932-35 car, wagon and sedan delivery. Per Ford Engineering release documents. Kit includes one Shoulder screw, 1/4 lock and 1/4-20 hex nut. FYI: 12 required for 1932 Vehicles and 14 required for 1933-35 vehicles. Please Order directly from Roy Nacewicz Enterprises, www.fordbolts.com. 14.95 5.95