Viale Galileo Galilei 123 36066 Sandrigo (VI) Italy Tel. +39 0444 666999 Fax. +39 0444 750070 info@helvi.com www.helvi.com PC 123 CNC Robotic machine interface complete Kit with: ST120 torch Ground cable WELDING MACHINES & BATTERY CHARGERS
PC 123 CHARACTERISTICS PC 123 with ST 120 PC 123 with PT 100 AMP AIR Line Voltage Compensation - + % Reference Standards certificate three phase Air cooled Digital display Line voltage compensation (3 ph) 400V 50/60Hz Torch ST 120 PT 100 Power 60% KVA 17 14 Max input current A 35 26,5 Uo V 290 290 Range A 15 100 15 100 current A 60% 100 80% 100 mm 40 35 25cm/min 35 30 Air pressure bar 6 4,4-5 Air capacity l/min 300 210 Insulation - H H Protec. Degree - IP22S mm (LxWxH) 520X240X540 mm (LxWxH) 400X675X510 kg 38,5 Code N 99835005 99835004 Heavy Duty suitable for heavy duty work WITH PNEUMATIC TORCH NO HF Grid it s plasma units based on inverter technology born to offer great performances at high speeds and on thick metals. Designed to work with both PT100 and ST120 torches according to your requirements. When equal current settings are used, the PT100 torch allows the same thickness of material to be cut as the PC103 with a higher duty cycle (going from 40% to 80%). The use of ST120 torch reduces the declared duty cycle through its requirement for proportionally more current from the power line and more air, the positive effects are that it drastically improves the maximum performance and increases the speed at which the can be achieved. Easy and intuitive, both units allow mode selection (griding or not) and display on the front panel the real and set current and the real air pressure. Suitable for manual and for with small CNC machines thanks to the specifically designed interface (connector on the back side for torch trigger and arc on signal).
CONTROL INTERFACE Display Torch Air Purge Button Views the set current when unit is on, during pilot arc time views the pilot arc current and during views the current. It views the air pressure (bar) once air drain knob (8) is pushed and during air pressure adjustment. Allows to remove any condensation that may have accumulated in the torch and leads while the system was shut down and to get the pressure set thru the air regulator viewed on the display. Amp Led When on it means that the display is viewing the adjusted or the effective current or the arc current Griding Function Seleciton Button Led Bar When on it means that the display is viewing the adjusted pressure. When blinking it means that air pressure is under 3,5 bar or over 6,5 bar. Allows to set unit for Griding. Green Led Turns ON when input voltage is applied to the machine. Red Led Yellow Led Turns ON when pilot or arc is initiated. Turns ON when the thermal protection is activated. Led Output Current Knob Yellow Turns on when the under-, overvoltage protection is working or when Adjusts the current supplied by the machine according to application (thickness of material/speed). phase is missing.
ACCESSORIES AND CONSUMABLES Optional air cleaning system for 3ph plasma inverter Moisture separator Plasma Inverter Air/Oil Filter Air Compressor Wrap torch A 04600396 Moisture separator A 22905092 Filter Cartridge B 22905093 B L 6 m CIRCLE CUTTING ATTACHMENT 23015248 ELECTRODE SPACERS 23015245B (1pc-D) 23015247B 23015243B 23015244B Ø 1,4 mm (80-90 A) - (5pcs-A ) Ø 1,5 mm (100-110 A) - (5pcs-A ) 23015246B (1pc-D) 23015247B 23015251B 23015252B 23015253B Ø 1,0 mm (40-50 A) - (5pcs-A ) Ø 1,1 mm (50-60 A) - (5pcs-A ) Ø 1,2 mm (60-70 A) - (5pcs-A ) 23015237B 23015257B 80/120A 23015254B 23015255B Ø 1,4 mm (80-90 A) - (5pcs-A ) Ø 1,5 mm (100-110 A) - (5pcs-A ) 23015258B 30/70A 23015268B 23015269B 23015270B Ø 1,0 mm (40-50 A) - (5pcs-A ) Ø 1,1 mm (50-60 A) - (5pcs-A ) Ø 1,2 mm (60-70 A) - (5pcs-A ) 23015237B 23015267B (5pcs-A) 23015271B 23015272B Ø 1,4 mm (80-90 A) - (5pcs-A ) Ø 1,5 mm (100-110 A) - (5pcs-A ) 23015274B 23015236B (5pcs-F) 23015265B Gouging (100-110 A) (5pcs-A ) 23015266B 23015277B 23015281B (10pcs-A) 23015282B (10pcs-A) 23015283B (10pcs-A) 40A 60A 80A 23015278B 23015284B (10pcs-A) 23015277B 23015287B (10pcs-A) 23015288B (10pcs-A) 23015289B (10pcs-A) 40A 60A 80A 23015290B (10pcs-A) 23015278B 23015303B (10pcs-A) 40-80A 23015295B 23015297B (5pcs-A) 23015298B (5pcs-A) 23015299B (5pcs-A) 40A 60A 80A 23015296B 23015300B (5pcs-A) 80/120A 40/80A m OUTSIDE PROTECTION NOZZLE 23015237B Gouging 6 DIFFUSER Ø 0,9 mm (30-40 A) - (5pcs-A ) Ø 1,0 mm (40-50 A) - (5pcs-A ) Ø 1,1 mm (50-60 A) - (5pcs-A ) Ø 1,2 mm (60-70 A) - (5pcs-A ) 80/120A ST120 () TIP 23015239B 23015240B 23015241B 23015242B 20/70A 23010077 PC 123 22905048 20/70A PT 100 () 23010078 Air/Oil Filter 40/80A 23015236B (5pcs-F) Gouging 23015279B 23015280B 23015279B 23015256B (1pc-D) 23015273B 23015285B (1pc-D) 23015286B (1pc-D) 23015201B 23015291B (1pc-D) 23015293B 23015294B 23015280B 23015279B 23015280B 23015292B (1pc-D) 23015304B 23015291B (1pc-D) 23015301B 23015292B (1pc-D) 23015302B